Search Results

Search found 7238 results on 290 pages for 'step'.

Page 252/290 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• "Error 1067: The process terminated unexpectedly" when trying to install MySQL on Win7 x64.

  - by Gravitas

  Hi, I've run into a brick wall trying to install MySQL v5.5 on my machine. My PC is Windows 7 x64, Enterprise edition. MySQL installs fine, but when I run the "MySQL Instance Configuration Wizard", it pauses forever on the step "Start Service" (I can let it run for 30 minutes with no response). If I go into services, I see that the "MySQL" service hasn't started, and if I try to start it, it says "Windows could not start MySQL Service on Local Computer. Error 1067: The process terminated unexpectedly." I've tried the following: Turning off firewall. Uninstalling all antivirus software. Installing / reinstalling 32-bit version of MySQL. Installing / reinstalling 64-bit version of MySQL. Uninstalling, deleting the contents of "C:\program files\MySQL" and "C:\program files (x86)\MySQL", reinstalling. Checking to see that there is no rogue services named MySQL???? (from a previous install). Checking that port 3306 is not used by an alternate program. Changing the default port that MySQL uses. Checking for "my.ini" and "my.ini.cnf" in "C:\windows" (nothing there but that can cause a problem). Running both MySQL installer, and configuration wizard, in "Adminstrator mode". Turning off UAC. Installing with defaults, not changing anything. Rebooting my machine (about 6 reboots so far). Opening up port 3306 in the firewall (both TCP and UDP, inbound and outbound). Swearing at the klutz of a programmer who designed MySQL so you can't even install it (as if that would help!) My machine is working 100% in every other way. InfiniDB (a MySQL compatible database) installs 100%, as does Visual Studio 2010, Microsoft SQL Server, etc, etc. Your advice on how to work around this? p.s. Here is the screen it got stuck on for 15 minutes until I killed the process: Update 2010-12-20 Tried MySQL v5.1, it didn't work either. Its amazing - if you type "mysqld /?", or "mysqld -help", it doesn't give you any help. And, if you try to restart the service manually, it doesn't display any error messages. Could it be any more unhelpful? Update 2010-12-21 Installed MySQL 6.0 alpha, and it worked. However, I'd rather not use an alpha release, given that the "stable" release is anything but :( Update 2010-12-21 Found http://dev.mysql.com/doc/refman/5.1/en/windows-troubleshooting.html, dealing with troubleshooting under Windows. Discovered that you can generate an error log if the service doesn't start - see here: http://dev.mysql.com/doc/refman/5.1/en/error-log.html

  Read the article

• Subversion/Hudson/Sonar/Artifactory - too much for my little server to handle! Help!

  - by Ricket

  I have a little dedicated server. It's at a cheap price and has a simple AMD 1800+ (1.5ghz), 256mb DDR RAM, ...need I continue? And I think I'm overloading it already. I have installed the following, and it's running CentOS 5.4: Webmin Apache MySQL Subversion as an Apache module Hudson (standalone) Sonar (standalone, runs with a standalone Jetty install) Artifactory (standalone) That's pretty much it. But I'm having problems; pages are loading quite slowly. Network speed of the server is excellent, but I think I'm just running out of CPU and/or memory. A side-effect of the pages loading slowly is that sometimes Hudson times out, not being able to start Maven or contact Sonar in a certain amount of time. I think the next step to speed things up might be to move to an application server and use the WAR version of Hudson, Sonar and Artifactory together on that server. I don't know that it will help, but it just seems to make sense, especially with Sonar running on its own Jetty install and the other two probably running their own mini application servers as well. Am I correct in thinking this? Is this the right course of action? Any other tips on how to make the server run faster? I can post more data if you'd like, just let me know what else would help you answer my question. Oh, also just to cure any suspicions, I don't have any sort of virus or spyware. I protect my SSH access with DenyHosts (which has blocked 300+ brute forcers in the past few months), and I have confirmed that the top four processes in terms of memory and CPU usage are Sonar, Artifactory, Hudson, and MySQL. Edit: I just thought of another thing that I'd like you to comment on as well: Apache currently has 8 spawned slave processes, taking 42MB of ram apiece. This is not my web server. Is everything else able to function if I shut down Apache? Can you point me towards a tutorial or something on migrating Subversion from Apache into something that might work along with the other three applications, maybe even make Subversion a WAR file or something?

  Read the article

• Can't get virtual desktops to show up on RDWeb for Server 2012 R2

  - by Scott Chamberlain

  I built a test lab using the Windows Server 2012 R2 Preview. The initial test lab has the following configuration (I have replaced our name with "OurCompanyName" because I would like it if Google searches for our name did not cause people to come to this site, please do the same in any responses) Physical hardware running Windows Server 2012 R2 Preview full GUI, acting as Hyper-V host (joined to the test domain as testVwHost.testVw.OurCompanyName.com) with the following VM's running on it VM running 2012 R2 Core acting as domain controller for the forest testVw.OurCompanyName.com (testDC.testVw.OurCompanyName.com) VM running 2012 R2 Core with nothing running on it joined to the test domain as testIIS.testVw.OurCompanyName.com A clean install of Windows 7, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it A clean install of Windows 8, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it I then ran "Add Roles and Features" from testVwHost and chose the "Remote Desktop Services Installation", "Standard Deployment", "Virtual machine-based desktop deployment". I choose testIIS for the roles "RD Connection Broker" and "RD Web Access" and testVwHost as "RD Virtualization Host" The Install of the roles went fine, I then went to Remote Desktop Services in server manager and wet to setup Deployment Properties. I set the certificate for all 3 roles to our certificate signed by a CA for *.OurCompanyName.com. I then created a new Virtual Desktop Collection for Windows 7 and Windows 8 and both where created without issue. On the Windows 7 pool I added RemoteApp to launch WordPad, For windows 8 I did not add any RemoteApp programs. Everything now appears to be fine from a setup perspective however if I go to https://testIIS.testVw.OurCompanyName.com/RDWeb and log in as the use Administrator (or any orher user) I don't see the virtual desktops I created nor the RemoteApp publishing of WordPad. I tried adding a licensing server, using testDC as the server but that made no difference. What step did I miss in setting this up that is causing this not to show up on RDWeb? If any additional information is needed pleas let me know. I have tried every possible thing I can think of and I am just groping around in the dark now. The virtual machines running on testVwHost The configuration screen for RD Services The Windows 7 Pool The Windows 8 Pool This is logged in as testVw\Administrator

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• Configured MySQL for SSL , but SLL is still not in use..!

  - by Sunrays

  I configured SSL for MySQL using the following script. #!/bin/bash # mkdir -p /root/abc/ssl_certs cd /root/abc/ssl_certs # echo "--> 1. Create CA cert, private key" openssl genrsa 2048 > ca-key.pem echo "--> 2. Create CA cert, certificate" openssl req -new -x509 -nodes -days 1000 -key ca-key.pem > ca-cert.pem echo "--> 3. Create Server certificate, key" openssl req -newkey rsa:2048 -days 1000 -nodes -keyout server-key.pem > server-req.pem echo "--> 4. Create Server certificate, cert" openssl x509 -req -in server-req.pem -days 1000 -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 > server-cert.pem echo "" echo echo "" echo "--> 5. Create client certificate, key. Use DIFFERENT common name then server!!!!" echo "" openssl req -newkey rsa:2048 -days 1000 -nodes -keyout client-key.pem > client-req.pem echo "6. Create client certificate, cert" openssl x509 -req -in client-req.pem -days 1000 -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 > client-cert.pem exit 0 The following files were created: ca-key.pem ca-cert.pem server-req.pem server-key.pem server-cert.pem client-req.pem client-key.pem client-cert.pem Then I combined server-cert.pem and client-cert.pem into ca.pem (I read in a post to do so..) I created a ssl user in MySQL: GRANT ALL ON *.* to sslsuer@hostname IDENTIFIED BY 'pwd' REQUIRE SSL; Next I added the following in my.cnf [mysqld] ssl-ca = /root/abc/ssl_certs/ca.pem ssl-cert = /root/abc/ssl_certs/server-cert.pem ssl-key = /root/abc/ssl_certs/server-key.pem After restarting the server,I connected to mysql but SSL was still not in use :( mysql -u ssluser -p SSL: Not in use Even the have_ssl parameter was still showing disabled.. :( mysql> show variables like '%ssl%'; +---------------+---------------------------------------------+ | Variable_name | Value | +---------------+---------------------------------------------+ | have_openssl | DISABLED | | have_ssl | DISABLED | | ssl_ca | /root/abc/ssl_certs/ca.pem | | ssl_capath | | | ssl_cert | /root/abc/ssl_certs/server-cert.pem | | ssl_cipher | | | ssl_key | /root/abc/ssl_certs/server-key.pem | +---------------+---------------------------------------------+ Have I missed any step, or whats wrong.. Answers with missed steps in detail will be highly appreciated..

  Read the article

• Unecrypted Image of Truecrypt-Encrypted System Partition

  - by Dexter

  The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

  Read the article

• DNS NS and domain clarification

  - by thejartender

  I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

  Read the article

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

  Read the article

• Old CRT screen's high resolution doesn't work anymore on windows 7

  - by Mixxiphoid

  One year ago I decided to switch from Windows XP to Windows 7. I had a 17" CRT monitor with a screen resolution of 1600x1200 which worked fine on Windows XP. While installing Windows 7 everything went well until Windows 7 was going to install the video card its driver. Windows 7 puts the screen to its recommended resolution and my screen became black. I waited a few minutes to be sure the installation was finished. I turned off the computer by hand and restarted the computer on a resolution of 800x640. When windows 7 was done installing I went to screen resolutions and the resolution of 1600x1200 was on the top of the list with '(recommended)' next to it. I tried putting it on 1600x1200 but again my screen went black. I installed all windows 7 updates including the video card driver from the NVidia site (NOT from Windows 7). I tried about everything to make it work on 1600x1200 but with no succes. The highest resolution I got with the crt monitor was 1280x1024. I had a TFT screen which had 1280x1024 as max resolution and had better colors, so I used that one till today. My video card is 9600GT and my power supply is beyond sufficient. I even tried to install the driver I had on XP to see if it worked, but no results. I tried classic mode on windows 7, changed the dpi, the frequentie and the monitor settings, but nothing worked. I really like a vertical resolution of 1200, but it seems today I'm bound to all those standard monitors with a resolution of 1980x1024... Can anybody explain to me what the cause is that it worked on Windows XP but not on Windows 7? And maybe a solution to the problem (I actually gave up on getting it fixed...) Thanks a lot in advance. SOLUTION I downloaded the according monitor driver and installed it. Next I rebooted my computer on low resolution (800x640) and connected the CRT monitor. When Windows 7 booted successfully I went to computer management and 'update the driver' of my monitor. I manually selected 'Generic PnP monitor' and made that one active. I want to advanced settings at 'Screen resolution' and selected the mode '1600x1200 (32-bit) 80 Hertz (95 Hertz did not work). Now I had my resolution on 1600x1200. I repeated the earlier step to select the original monitor again instead of the Generic monitor. Quite a way to solve this problem, but it worked! Thanks a lot you all.

  Read the article

• Kernel-mode Authentication: 401 errors when accessing site from remote machines

  - by CJM

  I have several Classic ASP sites that use Integrated Windows Authentication and Kerberos delegation. They work OK on the live servers (recently moved to a Server 2008/IIS7 servers), but do not work fully on my development PC or my development server. The IIS on both machines were configured through an IIS web deployment tool package which was exported from an old machine; the deployment didn't work perfectly, and I had to tinker a bit to get the sites working. When accessing the apps locally on either machine, they work fine; when accessing from another machine, the user is prompted by a username/password dialog, and regardless of what you enter, ultimately it results in a 401 (Unauthorised) error. I've tried comparing the configuration of these machines against similar live servers (that all work fine), and they seem generally comparable (given that none of the live servers are yet on IIS7.5 (Windows 7/Server 2008 R2). These applications run in a common application pool which uses a special domain user as it's identity - this user has similar permissions on the live and development machines. On IIS6 platforms, to enable kerberos delegation, I needed to set up some SPNs for this user, and they are still in place (even though I don't believe they are needed any longer for IIS7+ due to kernel-mode authentication), Furthermore, this account is enabled for Kerberos delegation in Active Directory, as is each machine I am dealing with. I'm considering the possibility that the deployment might have made changes/failed to make changes to the IIS configuration thus causing this problem. Perhaps a complete rebuild (minus another web deployment attempt) would solve the problem, but I'd rather fix (thus understand) the current problem. Any ideas so far? I've just had another attempt at fixing this issue, and I've made some progress, but I don't have a complete fix...yet. I've discovered that if I access the sites via IP address (than via NetBIOS name), I get the same dialog, except that it accepts my credentials and thus the application works - not quite a fix, but a useful step. More interestingly, I discovered that if I disable Kernel-mode authentication (in IIS Manager Website Authentication Advanced Settings), the applications work perfectly. My foggy understanding is that this is effectively working in the pre-IIS7 way. A reasonable short-term solution, but consider the following explicit advice from IIS on this issue: By default, IIS enables kernel-mode authentication, which may improve authentication performance and prevent authentication problems with application pools configured to use a custom identity. As a best practice, do not disable this setting if Kerberos authentication is used in your environment and the application pool is configured to use a custom identity. Clearly, this is not the way my applications should be working. So what is the issue?

  Read the article

• Unable to burn Windows ISO from Fedora

  - by user331947

  First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

  Read the article

• Biztalk 2009 install help

  - by _pemex99_

  Hi, I try to install Biztalk2009, with SQL 2008R2CTPNov, on Win Server 2008. I'm blocked at the configuration step "groups" : [19:22:18 Info Configuration Framework]Configuring feature: WMI [19:22:18 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature [19:22:18 Info BtsCfg] Configuring feature: WMI [19:22:18 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [19:22:18 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [19:22:18 Info BtsCfg] Entering function: CWMI::Connect [19:22:18 Info BtsCfg] WMI is already connected [19:22:18 Info BtsCfg] Leaving function: CWMI::Connect [19:22:18 Info ConfigHelper] NT group BizTalk Server Operators was not created because it already exists [19:22:18 Info ConfigHelper NetAPI Info: ] Le groupe local spécifié existe déjà. [19:22:18 Info ConfigHelper] NT group BizTalk Server Administrators was not created because it already exists [19:22:18 Info ConfigHelper NetAPI Info: ] Le groupe local spécifié existe déjà. [19:22:18 Info BtsCfg] Entering function: CWMI::CreateGroup 2010-01-14 19:22:18:0527 [INFO] WMI CWMIInstProv::PutInstance() try to acquire lock 2010-01-14 19:22:18:0539 [INFO] WMI CWMIInstProv::PutInstance() lock acquired successfully 2010-01-14 19:22:18:0546 [INFO] WMI CWMIInstProv::VerifyMgmtDbCompatibility(CInstance) started 2010-01-14 19:22:18:0553 [INFO] WMI CWMIInstProv::VerifyMgmtDbCompatibility(CInstance) finished successfully 2010-01-14 19:22:18:0564 [INFO] WMI CWMIInstProv::PutInstance(MSBTS_GroupSetting.MgmtDbName="BizTalkMgmtDb",MgmtDbServerName="ECTXEVLBZTK") started 2010-01-14 19:22:18:0572 [INFO] WMI CAdapter::ConvertWMI2Admin() started 2010-01-14 19:22:18:0581 [INFO] WMI CDataContainer::SetWCHAR() - Possible problem: item value is overwritten 2010-01-14 19:22:18:0591 [INFO] WMI CAdapter::ConvertWMI2Admin() finished with HR=0 2010-01-14 19:22:18:0611 [INFO] WMI QueryStringValue query regkey 'MgmtDBServer' 2010-01-14 19:22:18:0620 [INFO] WMI CAdmCoreGroupInst::TryCreateNewGroup() started 2010-01-14 19:22:18:0632 [INFO] WMI Creating Mgmt database... 2010-01-14 19:22:18:0641 [INFO] WMI Calling CDataSource.Open() against ECTXEVLBZTK\master 2010-01-14 19:22:18:0792 [INFO] WMI CDataSource.Open() returned 2010-01-14 19:22:18:0810 [WARN] AdminLib GetBTSMessage: hrErr=80040e1d; Msg=Error "0x80040E1D" occurred.; 2010-01-14 19:22:18:0824 [WARN] AdminLib GetBTSMessage: hrErr=c0c02524; Msg=Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred.; 2010-01-14 19:22:18:0835 [ERR] WMI Failed in pAdmInst->Create() in CWMIInstProv::PutInstance(). HR=c0c02524 2010-01-14 19:22:18:0846 [ERR] WMI WMI error description is generated: Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred. 2010-01-14 19:22:18:0860 [INFO] WMI CWMIInstProv::PutInstance() finished. HR=c0c02524 [19:22:18 Error BtsCfg] f:\bt\890\private\source\setup\prod\btssetup\btscfg\btswmi.cpp(358): FAILED hr = c0c02524 [19:22:18 Error BtsCfg] Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred. It seems that the install can't create Managment database, But the SSO database is created OK... Has someone a clue ?

  Read the article

• SQL Clustering on Hyper V - is a cluster within a cluster a benefit.

  - by Chris W

  This is a re-hash of a question I asked a while back - after a consultant has come in firing ideas in to other teams in the department the whole issue has been raised again hence I'm looking for more detailed answers. We're intending to set-up a multi-instance SQL Cluster across a number of physical blades which will run a variety of different systems across each SQL instance. In general use there will be one virtual SQL instance running on each VM host. Again, in general operation each VM host will run on a dedicated underlying blade. The set-up should give us lots of flexibility for maintenance of any individual VM or underlying blade with all the SQL instances able to fail over as required. My original plan had been to do the following: Install 2008 R2 on each blade Add Hyper V to each blade Install a 2008 R2 VM to each blade Within the VMs - create a failover cluster and then install SQL Server clustering. The consultant has suggested that we instead do the following: Install 2008 R2 on each blade Add Hyper V to each blade Install a 2008 R2 VM to each blade Create a cluster on the HOST machines which will host all the VMs. Within the VMs - create a failover cluster and then install SQL Server clustering. The big difference is the addition of step 4 whereby we cluster all of the guest VMs as well. The argument is that it improves maintenance further since we have no ties at all between the SQL cluster and physical hardware. We can in theory live migrate the guest VMs around the hosts without affecting the SQL cluster at all so we for routine maintenance physical blades we move the SQL cluster around without interruption and without needing to failover. It sounds like a nice idea but I've not come across anything on the internet where people say they've done this and it works OK. Can I actually do the live migrations of the guests without the SQL Cluster hosted within them getting upset? Does anyone have any experience of this set up, good or bad? Are there some pros and cons that I've not considered? I appreciate that mirroring is also a valuable option to consider - in this case we're favouring clustering since it will do the whole of each instance and we have a good number of databases. Some DBs are for lumbering 3rd party systems that may not even work kindly with mirroring (and my understanding of clustering is that fail overs are completely transparent to the clients). Thanks.

  Read the article

• New Exchange 2010 CAS cannot find domain controllers

  - by NorbyTheGeek

  I am experiencing problems migrating from Exchange 2003 to Exchange 2010. I am on the first step: installing a new 2010 Client Access Server role. The Active Directory domain functional level is 2003. All domain controllers are 2003 R2. The only existing Exchange 2003 server happens to be housed on one of the domain controllers. It is running Exchange 2003 Standard w/ SP2. IPv6 is enabled and working on all domain controllers, servers, and routers, including this new Exchange server. After installing the CAS role on a new 2008 R2 server (Hyper-V VM) I am receiving 2114 Events: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers. Prior to each, I receive the following 2080 Event: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Exchange Active Directory Provider has discovered the following servers with the following characteristics: (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version) In-site: b.company.intranet CDG 1 0 0 1 0 0 0 0 0 s.company.intranet CDG 1 0 0 1 0 0 0 0 0 Out-of-site: a.company.intranet CD- 1 0 0 0 0 0 0 0 0 o.company.intranet CD- 1 0 0 0 0 0 0 0 0 g.company.intranet CD- 1 0 0 0 0 0 0 0 0 Connectivity between the new Exchange server and all domain controllers via IPv4 and IPv6 are all working. I have verified that the new Exchange server is a member of the following groups: Exchange Servers Exchange Domain Servers Exchange Install Domain Servers Exchange Trusted Subsystem Heck, I even put the new Exchange server into Domain Admins just to see if it would help. It didn't. I can't find any evidence of Active Directory replication problems, all pre-setup Setup tasks (/PrepareLegacyExchangePermissions, /PrepareSchema, /PrepareAD, /PrepareDomain) completed successfully. The only problem so far that I haven't been able to resolve with my Active Directory is I am unable to get my IPv6 subnets into Sites and Services Where should I proceed from here?

  Read the article

• Secure, efficient, version-preserving, filename-hiding backup implemented in this way?

  - by barrycarter

  I tried writing a "perfect" backup program (below), but ran into problems (also below). Is there an efficient/working version of this?: Assumptions: you're backing up from 'local', which you own and has limited disk space to 'remote', which has infinite disk space and belongs to someone else, so you need encryption. Network bandwidth is finite. 'local' keeps a db of backed-up files w/ this data for each file: filename, including full path file's last modified time (mtime) sha1sum of file's unencrypted contents sha1sum of file's encrypted contents Given a list of files to backup (some perhaps already backed up), the program runs 'find' and gets the full path/mtime for each file (this is fairly efficient; conversely, computing the sha1sum of each file would NOT be efficient) The program discards files whose filename and mtime are in 'local' db. The program now computes the sha1sum of the (unencrypted contents of each remaining file. If the sha1sum matches one in 'local' db, we create a special entry in 'local' db that points this file/mtime to the file/mtime of the existing entry. Effectively, we're saying "we have a backup of this file's contents, but under another filename, so no need to back it up again". For each remaining file, we encrypt the file, take the sha1sum of the encrypted file's contents, rsync the file to its sha1sum. Example: if the file's encrypted sha1sum was da39a3ee5e6b4b0d3255bfef95601890afd80709, we'd rsync it to /some/path/da/39/a3/da39a3ee5e6b4b0d3255bfef95601890afd80709 on 'remote'. Once the step above succeeds, we add the file to the 'local' db. Note that we efficiently avoid computing sha1sums and encrypting unless absolutely necessary. Note: I don't specify encryption method: this would be user's choice. The problems: We must encrypt and backup 'local' db regularly. However, 'local' db grows quickly and rsync'ing encrypted files is inefficient, since a small change in 'local' db means a big change in the encrypted version of 'local' db. We create a file on 'remote' for each file on 'local', which is ugly and excessive. We query 'local' db frequently. Even w/ indexes, these queries are slow, since we're often making one query for each file. Would be nice to speed this up by batching queries or something. Probably other problems that I've now forgotten.

  Read the article

• Windows Server 2008 Software Raid 5 - Data integrity issues

  - by Fopedush

  I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

  Read the article

• Tool or script to detect moved or renamed files on Linux prior to a backup

  - by Pharaun

  Basically I am searching to see if there exists a tool or script that can detect moved or renamed files so that I can get a list of renamed/moved files and apply the same operation on the other end of the network to conserve on bandwidth. Basically disk storage is cheap but bandwidth isn't, and the problem is that the files often will be reorganized or moved around into a better directory structure thus when you use rsync to do the backup, rsync won't notice that its a renamed or moved file and re-transmission it over the network all over again despite having the same file on the other end. So I am wondering if there exists a script or tool that can record where all the files are and their names, then just prior to a backup, it would rescan and detect moved or renamed files, then I can take that list and re-apply the move/rename operation on the other side. Here's a list of the "general" features of the files: Large unchanging files They can be renamed or moved around [Edit:] These all are good answers, and what I end up doing in the end was looking at all of the answers and will be writing some code to deal with this. Basically what I am thinking/working on now is: Using something like AIDE for the "initial" scan and enable me to keep checksums on the files because they are supposed to never change, so it would aid on detecting corruption. Creating an inotify daemon that would monitor these files/directory and recording any changes relating to renames & moving the files around to a log file. There are some edge cases where inotify might fail to record that something happened to the file system, thus there is a final step of using find to search the file system for files that has a change time latter than the last backup. This has several benefits: Checksums/etc from AIDE to be able to check/make sure that some media did not get corrupt Inotify keeps resource usage low and no need to re-scan the filesystem over and over No need to patch rsync; If I have to patch things I can, but I would prefer to avoid patching things to keep the burden lower, (IE don't need to re-patch everytime there is an update). I've used Unison before and its really nice, however I could've sworn that Unison does keep copies around on the filesystem and that its "archive" files can grow to be rather large?

  Read the article

• Some domain names not resolving on local network

  - by Solignis

  I am not really sure where to start with this one... I have a small network setup with some linux servers (Ubuntu 11.04 Server). 2 servers are running BIND 9 (NS01, NS02), they are configured as master and slave respectively. 1 server is running Zimbra ZCS 7.1.1 (MX01), it has a private BIND 9 server running to achieve a split DNS configuration. This DNS server does not interact with the other two, it forwards queries it can resolve to the other 2 that is it. No zone transfers. Zimbra is hosting 3 domains at the moment, solignis.local, solignis.com, campbellsurvey.net. The problem From with in my network I cannot connect to mail.campbellsurvey.net. When I mean I cannot connect, I mean if I open firefox and type https://mail.campbellsurvey.net I go nowhere, the address is supposed to connect to my Zimbra webmail. But it goes nowhere, the odd thing is if I try the same task from outside of the network it brings the website up like normal. If I try to create an account in thunderbird to connect to the same server using IMAP4 or POP3 I get an error saying that thunderbird cannot find the domain name. Even the zimbra client fails too. It is like from with in my own walls that campbellsurvey.net does not exist. But if step outside I can get it work with no problem at all. I had thought maybe the problem was with the DNS server (BIND 9), so just to eliminate it as a possibility I configured a windows server I use for VMware VCenter as a DNS server to see what would happen. The result was the same, its like something is preventing connections to those domains, but I have checked various firewalls and such. I checked port forwards, etc. So I am running out of ideas I know this is not a lot of information to work from and I can give more details about certain things as needed. I am just trying to figure out what could be going wrong. Any help you could offer would be much appreciated.

  Read the article

• Diff 2 files while ignoring parts of lines

  - by Millianz

  I would like to diff a file system. Currently my bash script prints out the file system recursively into a file (ls -l -R) and diffs it with an expected output. An example for a line in this file would be: drw---- 100000f3 00000400 0 ./foo/ My current diff command is diff "$TEMP_LOG" "$DIFF_FILE_OUT" --strip-trailing-cr --changed-group-format='%' --unchanged-group-format='' "$SubLog" As you can see I ignore additional lines in the current output file, I only care about lines that match with the master output. I now have the problem though that some files may differ in size, or a folder might even have a different name, but due to it's location I know what access rights it should have. For example: Output: ------- 00000000 00000000 528 ./foo/bar.txt Master: ------- 00000000 00000000 200 ./foo/bar.txt Only the size differs here, and it doesn't matter, I would like to just ignore certain parts of the diff, kind of like an ansi c comment. Master: ------- 00000000 00000000 /*200*/ ./foo/bar.txt -- OR -- Master: d------ 00000000 00000000 /*10*/ ./foo//*123123*///*76456546*//bar.txt Output: d------ 00000000 00000000 0 ./foo/asd/sdf/bar.txt And still have it diff correctly. Is this even possible with diff, or will I have to write a custom script for it? Since I'm fairly new to cygwin I might be using the completely wrong tool all together, I'm happy for any suggestions. Update: Taking a step back, here is the general task at hand that I want to achieve. I want to write a script that checks the file system to see if the read/write permissions are set up correctly. The structure of the file system is under my control, so I don't have to worry about it changing too much. Sometimes folders/files might not be present, but if they are their permissions must be checked. For Example assume that the following is a snapshot of the current file system structure drw ./foo drw ./foo/bar -rw ./foow/bar/bar.txt drw ./foo/baz -rw ./foo/baz/baz.txt And this is what the file system structure might dictate, i.e. if these folders / files are present, the permissions must match. drw ./foo drw ./foo/bar -rw ./foo/bar/bar.txt --- ./foo/bar/foobar.txt drw ./foo/baz -rw ./foo/baz/foobaz.txt In this case the file system checked out ok, since all files present match their expected values. The situation becomes more complicated as soon as certain folders might have any arbitrary name, only due to their location I know what their permissions should be. Assume that the directory ./foo/bar in the above example might be such a case, i.e. instead of bar the folder could have any name, but still match the -rw permissions. This seems like a very complicated situation, and I'm not even sure if I can solve it with bash scripting alone. I might have to write an actual application.

  Read the article

• Multiple OS's and GRUB chainloading

  - by Kent

  Hi, I want to have multiple OS installations and I have been advised that chain loading using GRUB is a good way to handle this. I have looked at tutorials on the web but I still have some questions before I can start. I want: Windows XP: 20 GB. For running some school stuff and a game which does not work through WINE. Xubuntu 9.04: 85 GB. My main OS. Another Linux distribution: 15 GB . For experimenting and trying Linux distributions out. I will: Wipe and install various distributions quite often on the 15 Use dd to make a copy of my Windows partition after installing it and getting things to work as I like. My experience is that Windows needs to be re-installed maybe once per year to not get bloated and slow. I have been told: To use GRUB chain loading. It will make it easier when kernel upgrades are made in the Linux distributions, as they modify the GRUB boot-menu. To my understanding I need to: (I might very well be mistaken) Install Windows first. Then install Xubuntu and let it write over the MBR with GRUB (I guess this is the default). Get the GRUB on the MBR start Windows XP if I want to (it's done by default), start Xubuntu using the kernel of my choice or defer execution to the boot sector of my other Linux distribution. The actual chain loading will only occur when I want to start my experimental install of Linux. I wonder: Is step 3 above correct and a good way to handle this? Is it also a good way to use chain-loading for both Xubuntu and my experimental Linux installation? How do I get a Linux distribution to install the boot loader it comes with to the boot sector of its partition and not to the MBR? If I can't get it to not touch the MBR. Then I could make a backup of the MBR using dd and then write it back after installing my experimental Linux installation. But then, how would I get the boot loader (lets say GRUB) into the boot sector of the experimental Linux installation? How would it work if said Linux installation gets a new kernel update and needs to update the GRUB menu?

  Read the article

• When upgrading from Vista to Windows 7 on a DELL laptop, how do I know which drivers to reinstall an

  - by msorens

  According to Dell's upgrade page for Vista to Windows 7, after using the upgrade assistant the final step is to install drivers. They refer to this page for the order of driver installation, listing 9 items. From there I go to the Dell Drivers and Downloads page, enter my system tag, and get a list of the downloads available for my specific box. That page, by the way, has a link to driver install instructions that lists 10 rather than 9 items. Going to Drivers Help in the side panel and clicking on "In what order should drivers be installed?" shows yet a third list, this one containing 13 items. Not surprisingly, the order of these 3 lists of drivers are not quite the same for the common items! Furthermore, of the 26 files Dell's site recommends for my machine, there are several not shown on any of the 3 lists! I can make determinations for some of these: 6 of them are "applications" so I know which of those I want and that they could probably be safely installed after all drivers. BIOS: I would think this should be unaffected by an OS upgrade so could be skipped. Two tools in the diagnostics category: could probably be done after all drivers. That leaves just a CD/DVD driver and a webcam driver unaccounted for. So my two related questions are these: How critical is the driver installation order and which one do I follow? (Keep in mind this is for an upgrade, not a fresh install.) Where in the order do I insert the CD/DVD and the webcam drivers (if needed) ? Dell's driver download page provides (in theory) the list of all downloads relevant to my specific machine, via the service tag. But do I actually need to reinstall all of them? some? none? How does one determine this? They do label each with Recommended or Optional, so do I need to reinstall all the recommended ones? (Part of the reason for my perplexed frown is that I wonder why I would need to reinstall a CD/DVD driver since I would already be using the drive to install the OS!)

  Read the article

• amazon ec2 ubuntu with gitlab and nginx - cant load?

  - by thebluefox

  Ok, so I've spooled up an Amazon EC2 server running Ubuntu, and then followed the instructions below to install GitLab; http://doc.gitlab.com/ce/install/installation.html The only step I've not been able to complete is running the following check on the status; sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production I get the following error; rake aborted! Errno::ENOMEM: Cannot allocate memory - whoami Which I presume is becuase my EC2 is just running a free tier setup, so isn't that well spec'd. Regardless, I've been trying to access this through my browser. I've set up the elastic IP and pointed my domain at it (for the purpose of this, lets say its git.mydom.co.uk). Doing a whois on this domain shows me its pointing to the right place. For some reason though, I get the "Oops, Chrome could not connect to git.mydom.co.uk". Now - for a period of time I was getting the Nginx holding page (telling me I still needed to perform configuration). This though disappeared after removing the default file from /etc/nginx/sites-enabled/ (after reading this could be issue on a troubleshooting page). Since then, I've had nothing, even when I symlinked the file back in from /sites-available. I've tried changing the owner of the git.mydom.co.uk file sat inside /sites-enabled and /sites-available to www-data, as suggested here, but I could only change the permission of the file in /sites-available, and not the symlinked one in /sites-enabled. The content of this file is as follows; upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80 default_server; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.mydom.co.uk; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # Increase this if you want to upload large attachments # Or if you want to accept large git objects over http client_max_body_size 20m; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } All the paths mentioned in here look ok...I'm about at the end of my knowledge now!

  Read the article

• Fix single entry from mbr

  - by Sander

  I use EasyBCD to manage my tripleboot of (1) Windows Server 2008 R2, (2) Windows 7 Professional and (3) Ubuntu Linux. While trying to change the order of my boot menu I ended up losing the Windows Server entry. Luckily I had a boot menu backup (.bcd file) that allowed me to restore my boot menu using EasyBCD. However, when I now select the Windows Server option in my boot menu the Windows Server Recovery Environment starts up. So I have to select language/keyboard layout/etc. and then I have 3 options as shown in the image below. . My goal is to fix the one corrupted Windows Server entry from my boot menu without messing up or losing the two other ones. I'm guessing the Recovery Console (Command Prompt) is the next step and that I will be needing bootrec.exe. But when consulting this page: Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows (about half way down there's a link that shows the bootrec.exe options) I'm getting uncertain. The page lists 4 options for bootrec.exe : /FixMbr /FixBoot /ScanOs /RebuildBcd What option do I need to fix just the server entry of my boot menu? Thanks in advance, Sander P.S. All three OS's are on the same physical disk (3 different partitions). Disk layout: System reserved (primary partition, 100 MB) Windows 7 (primary parition, 150 GB) Windows Server 2008 (primary partition, 150 GB) Extended partition (linux partitions (/,/swap,/home), 150GB + data partition, 150 GB) P.P.S. This is what my boot menu looks like using EasyBCD (Detailed/Debug mode) on my Windows 7 installation. Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume1 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {93f90e43-cae8-11df-b05a-c9177e705936} resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} displayorder {93f90e43-cae8-11df-b05a-c9177e705936} {93f90e3f-cae8-11df-b05a-c9177e705936} {93f90e46-cae8-11df-b05a-c9177e705936} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {93f90e43-cae8-11df-b05a-c9177e705936} device partition=\Device\HarddiskVolume3 path \Windows\system32\winload.exe description Windows Server 2008 R2 - Standard locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e44-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=\Device\HarddiskVolume3 systemroot \Windows resumeobject {93f90e42-cae8-11df-b05a-c9177e705936} nx OptOut Windows Boot Loader ------------------- identifier {93f90e3f-cae8-11df-b05a-c9177e705936} device partition=C: path \Windows\system32\winload.exe description Windows 7 - Professional locale nl-NL inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e40-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} nx OptIn Real-mode Boot Sector --------------------- identifier {93f90e46-cae8-11df-b05a-c9177e705936} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu 10.04 - Lucid Lynx

  Read the article

• NTP daemon or ntpdate doesn't synchronize

  - by user2862333

  I'm having some problems with synchronization with an NTP server. 1) The NTP daemon doesn't sync the system clock at all, even though it's running (confirmed with /etc/init.d/ntp status). Forcing to sync with ntpd -q or ntpd -gq does not work either. 2) Stopping the NTP daemon and syncing manually with ntpdate does give me the following output: ~# ntpdate -d 0.debian.pool.ntp.org 6 Nov 16:48:53 ntpdate[4417]: ntpdate [email protected] Sat May 12 09:07:19 UTC 2012 (1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) server 79.132.237.5, port 123 stratum 2, precision -20, leap 00, trust 000 refid [79.132.237.5], delay 0.05141, dispersion 0.00145 transmitted 4, in filter 4 reference time: d624e3b1.f490b90d Wed, Nov 6 2013 16:50:09.955 originate timestamp: d624e457.eaaf787c Wed, Nov 6 2013 16:52:55.916 transmit timestamp: d624e36c.4a7036fd Wed, Nov 6 2013 16:49:00.290 filter delay: 0.08537 0.05141 0.05151 0.06346 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6038 235.6087 235.6095 235.6068 0.000000 0.000000 0.000000 0.000000 delay 0.05141, dispersion 0.00145 offset 235.608782 server 85.234.197.2, port 123 stratum 2, precision -20, leap 00, trust 000 refid [85.234.197.2], delay 0.05151, dispersion 0.00336 transmitted 4, in filter 4 reference time: d624e3e7.dc6cd02b Wed, Nov 6 2013 16:51:03.861 originate timestamp: d624e458.1c91031f Wed, Nov 6 2013 16:52:56.111 transmit timestamp: d624e36c.7da1d882 Wed, Nov 6 2013 16:49:00.490 filter delay: 0.05765 0.07750 0.06013 0.05151 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6048 235.6014 235.6035 235.6078 0.000000 0.000000 0.000000 0.000000 delay 0.05151, dispersion 0.00336 offset 235.607826 server 194.50.97.34, port 123 stratum 3, precision -23, leap 00, trust 000 refid [194.50.97.34], delay 0.03021, dispersion 0.00090 transmitted 4, in filter 4 reference time: d624e38d.2bce952c Wed, Nov 6 2013 16:49:33.171 originate timestamp: d624e458.4dbbc114 Wed, Nov 6 2013 16:52:56.303 transmit timestamp: d624e36c.b0d38834 Wed, Nov 6 2013 16:49:00.690 filter delay: 0.03030 0.03636 0.03091 0.03021 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6095 235.6085 235.6098 235.6105 0.000000 0.000000 0.000000 0.000000 delay 0.03021, dispersion 0.00090 offset 235.610589 server 79.132.237.1, port 123 stratum 3, precision -20, leap 00, trust 000 refid [79.132.237.1], delay 0.05113, dispersion 0.00305 transmitted 4, in filter 4 reference time: d624dfcb.6acea332 Wed, Nov 6 2013 16:33:31.417 originate timestamp: d624e458.838672ad Wed, Nov 6 2013 16:52:56.513 transmit timestamp: d624e36c.e405181c Wed, Nov 6 2013 16:49:00.890 filter delay: 0.06345 0.05113 0.05681 0.05656 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6087 235.6038 235.6010 235.6074 0.000000 0.000000 0.000000 0.000000 delay 0.05113, dispersion 0.00305 offset 235.603888 6 Nov 16:49:00 ntpdate[4417]: step time server 79.132.237.5 offset 235.608782 sec Clearly, ntpdate can reach the NTP server(s), but after checking the clock, it hasn't changed and is still displaying the wrong time. Any ideas what would be the problem would be much appreciated.

  Read the article

• How can I remove old log entries from a log file and archive them somewhere else in Linux?

  - by Mike B

  CentOS 4.x I apologize in advance if this is not the appropriate place to ask this question. It pertains to a linux server / IT admin task. I've got a log file on an old CentOS 4.x server and I want to remove log entries older than a certain date and place them in a new file for archive. Here's an example of the log format: 2012-06-07 22:32:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:03,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:04,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:32:10,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:12,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:15,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:32:40,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:32:58,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:33:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| 2012-06-07 22:33:01,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123|blah blah blah 2012-06-07 22:33:02,289 ABC:0|Foo|Foo2|4.4|1234|Some Event|123| Essentially, I'm looking for a one-liner that will do the following: Find any events older than a provided YYYY-MM-DD and remove them from the primary log file. Take the deleted events from step 1 and put them in a new log file (Optional) Compress the new archive log file holding the deleted events. I'm aware that there are log rotate tools that do this but this should just be a one-time task so I'd prefer not to set that up. Additional notes: If the date part it tricky or too resource intensive, an alternative would be to just keep the last X number of lines and move the rest. I was originally thinking of something like tail -n 10000 > newfile.txt but that would mean moving the "good" logs to a new file and then doing a name swap... and then I'd still need to remove the "good" entries from the archive. This particular log file is pretty large (1 GB) so I'd prefer the task to be as resource and time efficient as possible. The extra pipes in the log concern me and I'm not sure if I'd need extra protection in the commands to avoid that from causing problems.

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >