Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 253/461 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

  • Routing between two networks on linux?

    - by gGololicic
    I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

    Read the article

  • Can next hop address be same as destination address?

    - by Raj
    Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

    Read the article

  • Public Wi-Fi and software updates

    - by coding4fun
    According to Microsoft, "Never update your software on a public Internet connection." So I have some questions. 1. What if a public Wi-Fi hotspot is the only Internet available, ever? Never update anything? 2. What happens if Windows or some other program is set to update automatically and attempts to do so while you are using a public Wi-Fi? Disable all automatic updates on all software? 3. Will VPN help to secure software updates? If so, how to go about it? Thanks.

    Read the article

  • Real time audio streaming

    - by Josh K
    I have a remote computer running OS X. I would like to stream the audio from the microphone input over the network so I can listen to it. Primarily I want to do this because I'm out of the office but still need to communicate with people there. I would like to use VLC, but am not fully aware of the options available. I tried SoundFly (as recommended by another answer) but this didn't seem to want to connect. At this point I should note that I'm using a VPN network to connect to the remote computer (using Hamachi). I can open up ports / etc fine though, so I should be able to do this. Alright, I found Nicecase which does exactly what I want but I would prefer to not have to shell out $40 for it.

    Read the article

  • Looking for an open source real-time network analysis program

    - by JrSysAdmin
    Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

    Read the article

  • Do TCP connections work differently within the same subnet?

    - by Dean
    I've encountered some network behaviour that confuses me while trying to get Java RMI working. I use netcat to connect to a local machine: [my_machine]$ nc -w 1 192.168.0.100 60000 && echo success success I try to do the same to my server: [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success This doesn't work, unless I explicitly listen on the server socket: [amazon_ec2]$ nc -l 60000 [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success success For the version that fails, the SYN packet receives a RST, ACK in response. I'm not too knowledgable about this stuff, at this point I only have wild theories such as the one in the question. Any ideas? Potentially useful details: Local Machine (192.168.0.100) - Macbook Remote Machine (Amazon EC2) - Amazon Linux AMI 2012.03 Security Group Settings: 22 (SSH) 0.0.0.0/0 1099 0.0.0.0/0 49152-65535 0.0.0.0/0 "iptables -L" shows no rules set

    Read the article

  • Conflicts between 2 NICs

    - by funbi_grace
    Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

    Read the article

  • Troubleshooting Network Speeds -- The Age Old Inquiry

    - by John K
    I'm looking for help with what I'm sure is an age old question. I've found myself in a situation of yearning to understand network throughput more clearly, but I can't seem to find information that makes it "click" We have a few servers distributed geographically, running various versions of Windows. Assuming we always use one host (a desktop) as the source, when copying data from that host to other servers across the country, we see a high variance in speed. In some cases, we can copy data at 12MB/s consistently, in others, we're seeing 0.8 MB/s. It should be noted, after testing 8 destinations, we always seem to be at either 0.6-0.8MB/s or 11-12 MB/s. In the building we're primarily concerned with, we have an OC-3 connection to our ISP. I know there are a lot of variables at play, but I guess I was hoping the experts here could help answer a few basic questions to help bolster my understanding. 1.) For older machines, running Windows XP, server 2003, etc, with a 100Mbps Ethernet card and 72 ms typical latency, does 0.8 MB/s sound at all reasonable? Or do you think that slow enough to indicate a problem? 2.) The classic "mathematical fastest speed" of "throughput = TCP window / latency," is, in our case, calculated to 0.8 MB/s (64Kb / 72 ms). My understanding is that is an upper bounds; that you would never expect to reach (due to overhead) let alone surpass that speed. In some cases though, we're seeing speeds of 12.3 MB/s. There are Steelhead accelerators scattered around the network, could those account for such a higher transfer rate? 3.) It's been suggested that the use SMB vs. SMB2 could explain the differences in speed. Indeed, as expected, packet captures show both being used depending on the OS versions in play, as we would expect. I understand what determines SMB2 being used or not, but I'm curious to know what kind of performance gain you can expect with SMB2. My problem simply seems to be a lack of experience, and more importantly, perspective, in terms of what are and are not reasonable network speeds. Could anyone help impart come context/perspective?

    Read the article

  • How do I recover my router password without resetting it?

    - by Pacerier
    I want to know the password of my router. The default username and pass isn't working. I've read this thread i forgot my wireless router password. what do i do . . however it tells me to reset the router (I do not wish to reset the router to factory settings) This is my router: Linksys Wireless-N Home Router WRT120N I'm thinking there's some way we could get the password (or bypass the need to) that we need to enter 192.168.1.1?

    Read the article

  • Cant get squid proxy to work

    - by danielgratz
    i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments): acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT acl our_networks src 192.168.1.0/24 192.168.2.0/24 http_access allow our_networks http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache coredump_dir /var/spool/squid Then i just put my server's public ip and port 3128 into my web browsers proxy settings... but it isn't working i can't visit any website. Please help. Thanks.

    Read the article

  • Network Sniffing and Hubs

    - by Chris_K
    This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

    Read the article

  • How can I make my eth0 connection default on startup?

    - by Alex
    I'm running kubuntu 9.10 and every time I log in auto eth0 is used instead of my custom connection called "batnet". I have batnet set to automatically connect, but despite this it is ignored and the default auto eth0 is used instead. This would be fine IF I could somehow figure out how to define a static ip for auto eth0. I would prefer to just make the 'batnet' connection default. How can I do this?

    Read the article

  • Subnet address in apache access log

    - by m0ntassar
    I was inspecting my apache access logs(I use default combined log format) and I came a cross a wired entry 69.171.247.0 - - [22/Oct/2012:18:15:20 +0200] "GET /some site resources HTTP/1.1" 404 514 "-" "facebookexternalhit/1.0 (+http://www.facebook.com/externalhit_uatext.php)" As u see, this query come from a facebook robot that extract objects from site when somebody post a link. What I find weird is the logged ip address : 69.171.247.0 Does anybody know how is that possible ?

    Read the article

  • Two domains accessing same folder

    - by Liam Quinn
    I've just taken a new role in a school and am still familiarizing myself with their network, how ever I have recently been given a task and I'm having a little trouble finding out the fundementals of it. I have an admin network/domain 10.49.x.x and a classroom network/domian 192.168.1.x both connect to a Proxy server 10.49.202.231/192.168.1.51. Each domain has it's own shared folders as you'd expect, files and software installs etc, how ever there is a folder "staff" on the classroom network that all the teachers on the classroom network can access. The users on the admin network would like to access this same folder. How do I go about making this happen?

    Read the article

  • Unable to ping between subnets and out to internet

    - by battlemidget
    My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

    Read the article

  • 2 Computers, same network, different outgoing speeds when uploading to internet?

    - by user117339
    I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

    Read the article

  • Could not use domain name instead of static IP

    - by Nam Gi VU
    Hi, I'm working with some partners in the UK. My office is in Vietnam. We are having a network problem: My partner can access an internal website using the domain name, e.g. http://website.name, but I can only access that website using the direct IP, e.g. 192.168.1.85. I can not ping that web server using "ping website.name" but it works if I using "ping 192.168.1.85". I want to use the domain name. Please help.

    Read the article

  • Making an outside machine visible to private network

    - by William
    Hi, I'm trying to make a server visible to a every computer on a separate network without doing anything to the server but I'm not sure what would be the best way to do this. I really just need to access one folder but my attempting at NFS mounting failed since I can't NFS mount a mounted folder. Any advice? Thanks.

    Read the article

  • Multiple wifi cards and Internet connections on Win-7

    - by Dpp
    Hello, I have two wifi cards and two separated internet connections. I connect to the Internet with both of them but one does all of the internet transactions (and I have not seen any place where I can specify which one I would prefer to use!) What I would like to do is use one of them for the browser and skype only, and the other one for stock exchange software for instance. Any idea if it is possible?

    Read the article

  • Cisco: changing VTP mode server/client to transparent

    - by J. Smith
    I have around 40 L2 switches (2960, 3560, 3500, 3750) running in VTP client mode and one L3 switch (6500) running in VTP server mode, all connected together. I would like to switch everything in VTP transparent mode without any interruption of service. I've already test on a poc version with 3 switches (Catalyst 2950, 3560 and 3750). Using serial and SSH connection, it is seems working but i'm not sure it is enough representative compare to the real network. Knowing that the VTP Pruning is enabled, I am wondering what would be the best procedure to proceed the changement. I've read that we could lost connection by keeping it enabled. Should I change the server or clients first? Is it important to change the VTP domain and VTP Pruning parameters?

    Read the article

  • How can a Virtualbox host connect to a guest VM when host wireless is disabled / host Ethernet cable is unplugged?

    - by uloBasEI
    I have a Virtualbox VM running on a computer connected to Internet via an Ethernet cable. The guest has a network adapter attached to a NAT. 2 ports (22 and 80) are forwarded so that the host can access them respectively on localhost:2222 and localhost:8080. When the Ethernet cable is plugged, both machine (host and guest) can access Internet and the host can access the SSH server/Webserver which ports are forwarded. When I unplug the Ethernet cable from the host, the host can not access the SSH server/Webserver of the guest anymore. Same situation with a Laptop connected to Internet via wireless when I disable the wireless adapter or set a wrong WPA key. My question is: is there a workaround for the host to access the guest services even if its Ethernet cable is unplugged / wireless is not available?

    Read the article

  • An device with an unknown MAC address is connected to my router

    - by Yar
    There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

    Read the article

  • Determining the State of a User using their Hostname

    - by PhpMyCoder
    Not sure if this is the right SE site. I figured this question doesn't belong on SO, but if you think it doesn't belong here either, I apologize. I've been looking into determining the location, specifically the state, of a user accessing my website. One of the options I've known about for a while is the GeoIP City Database, however this isn't the most cost effective solution and I'm cheap so I was looking for a less expensive way. Something that occurred to me was that my state was in the public hostname assigned to me by Comcast: (Dash Separated IP).hsd1.ma.comcast.net Could it be possible that other ISPs follow this same pattern of inserting the state abbreviation into their users' hostnames? I've been looking around for a list of hostnames for other ISPs, but I haven't found anything. Can anyone verify that this holds true for other major ISPs?

    Read the article

  • What is the network address (x.x.x.0) used for?

    - by Shtééf
    It appears to be common practice to not use the first address in a subnet, that is the IP 192.168.0.0/24, or a more exotic example would be 172.20.20.64/29. The ipcalc tool I frequently use follows the same practice: $ ipcalc -n -b 172.20.20.64/29 Address: 172.20.20.64 Netmask: 255.255.255.248 = 29 Wildcard: 0.0.0.7 => Network: 172.20.20.64/29 HostMin: 172.20.20.65 HostMax: 172.20.20.70 Broadcast: 172.20.20.71 Hosts/Net: 6 Class B, Private Internet But why is that HostMin is not simply 64 in this case? The 64 address is a valid address, right? And whatever the answer, does the same apply to IPv6? Perhaps slightly related: it also appears possible to use a TCP port 0 and an UDP port 0. Are these valid or used anywhere?

    Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >