Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 254/1518 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Windows takes a very long time to shut down even in safe mode

  - by user1526247

  On Windows 7 the computer freezes for about 5 minutes once it gets to "Shutting down...". I can't remember when it started happening. I just lived with it for a while. The first thing I tried was a full scan using Microsoft Security Essentials. This did not solve the problem. I then went into msconfig and turned off everything I could get away with in the startup and services tabs. This did not solve the problem. I then uninstalled every program on this computer save the most basic programs. This did not solve the problem (did not uninstall drivers or catalyst). I then went through and turned off every single service and did a reboot. This did not solve the problem. I then booted into safe mode and just tried shutting it down. The problem even happens in safe mode. I have tried examining the event logs but with no success. They just say things like "blah blah has entered the stopped state" with no real clues about what program is causing me all this grief. *it may be worth noting that Ubuntu is installed on the same computer and the ubuntu boot loader is the one being used.

  Read the article

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• System Issues and Major Malfuctions after Failed hibernation Exit

  - by Sarah Seguin

  I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

  Read the article

• Find out what fonts are being sent to a printer

  - by user38307

  I have an issue where two computers running XP and with identical print drivers have different behavior printing over parallel port to receipt printers. For one type of receipt, receipt printing is instant. For another kind printing is delayed by ten seconds on most machines but not on the other. This happens even if I swap out printers. I believe the delay is because this computer has a different set of fonts installed. (It is used for graphic design.) The printers have built-in fonts, and if you do not use one of the built-in fonts the printer has to build up an image in memory rather than just spitting out its fonts. For a particular kind of receipt with special fonts on a particular computer the computer is sending a font which the receipt printer does not have built in. My question is, is there a way to find out what fonts are being sent to the printer? This would let me narrow down what I need to modify in the Windows font folder. Thank you!

  Read the article

• Windows - Decrypt encrypted file when user account is destroyed

  - by dc2

  I have a Virtual Machine running on my Windows Server 2008 computer that originally was received by me encryped, as the builder of the VM did it on a MAC, which decrypts files by default. I never thought to decrypt these files, as they automatically 'decrypt' when you have permission over them, so the VM has been running for over a year despite the encryption. I just upgraded my computer to Domain Controller (dcpromo.exe). Now when I try to access/run the VM, I can't because I don't have permission to decrypt the files as that was on another logon (local administrator) and now I am the domain administrator. Apparently the local admin is totally nuked when you upgrade to domain controller. I have tried EVERYTHING - taking ownership of the files, which works. Doesn't do anything for me. Adding full control to everyone on the files. I go to File Properties Advanced Details (under encryption) Users who can access this file. The only user is administrator@localcomputername, and there is a cert number. I try adding a new cert, I don't have permission. I don't have permission to: Decrypt the file (access is denied). Copy the file (to another computer) - access denied. I am totally stumped and this VM is a production machine and needs to get up right now. Does anyone have any ideas?

  Read the article

• Windows 8 not shutting down properly

  - by Patrick

  Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

  Read the article

• Win7 loses connection to network shares after resume unless server specified using FQDN

  - by Szonja Zemkó

  My Win7 client has a connection to a Linux server and its shared folders. The problem occurs when the computer wakes up after a sleep and then one of the shared folders is not accessible. I receive the following message: Error code: 80070035, The network path was not found. I have problem with one specific folder only. When I restart the computer this problematic folder is accessible again. When I log off before sleep the folder is accessible after wakeup. If I try to access the folder by using the FQDN of the server or the server IP it is also accessible. As a temporary solution I mapped the folder to a network drive using the FQDN and it's working fine but it's inconvenient since every other folder is accessible on the server. To summarize: \server\problematicshare no longer works after resume (the Samba server sees my client connect, then disconnects a few seconds later while I receive the above error message) \server\othershare works after resume \fqdn.of.server\problematicshare always works \ip.of.server\problematicshare always works once the problem manifests, I'm no longer able to restart the "Workstation" service (it is not responding) restarting the "Computer Browser" service has no apparent effect the event log doesn't contain anything that seems relevant "ping server" works

  Read the article

• Conditional formatting Excel 2007/2010: Highlight the first cell in the row that contains duplicate values?

  - by Nancy Prades

  I have a table with hundreds of columns and rows of data; each row and column have a header. For instance, column headers are ITEM, FILE1, FILE2, FILE3, etc. and row headers are AA, BB, CC, DD, and so on. Under conditional formatting, I used "Highlight Cells Rules" "Equal to", in order to highlight cells that have values equal to the value in another cell. In this case, my formula rule is: Rule: Cell Value = $A$1 Applies to: =$B$3:$G$8 When I input "X" into cell A1, Excel will highlight all of the cells that have a value equal to "X", in this case, the following cells are highlighted: B3, C5, G6, and E8. Here's my problem. The data that I am working with contains more than 100 columns and rows. I want to identify all of the ITEMS (AA, BB, CC, etc.) that contain the duplicate file "X". In order to do this I have to scroll right to left, and up and down. Here's my question. Is there a way to use conditional formatting to add an additional rule? I want to keep the current rule, but I also want the row header to be highlighted if any of the cells in that row contain a value equal to "x". In this case, I want AA, CC, DD, and FF to also be highlighted. Is this possible? I've spent days trying to figure this out - and no luck. Any help would be appreciated! :) Nancy A B C D E F G 1 X 2 ITEM FILE1 FILE2 FILE3 FILE4 FILE5 FILE 6 3 AA x t y u d w 4 BB r y a b k d 5 CC y x f u i g 6 DD t v b d f x 7 EE e w y s l n 8 FF w u n x e m

  Read the article

• How to diagnose a spontaneous reboot?

  - by Spectralist

  My computer reboots, seemingly completely at random, about once every week to two weeks but has occasionally gone months. It just goes from running fine to the POST with no error messages or anything and doesn't seem to be due to heat or usage as it's happened a couple of times when the computer has booted just a few moments ago and is idling. It's been happening for as long as I've had this computer, almost two years. It's happened in both Vista and Windows7. I strongly suspect it's a hardware problem. But due to the rareish and random nature of the crashes my normal strategy of just removing hardware until the problem stops isn't really practical. My guess would be Power Supply, Ram, or Motherboard. But I just don't know how to test an issue this random and want to figure out how to confirm which it is before I go replacing things. So is there some software or hardware that can be used to test these sorts of errors? I did run memtest86 for about 8 hours without finding any issues. And the power supply is more than capable of running my system.

  Read the article

• What character can be safely used for naming files on unix/linux?

  - by Eric DANNIELOU

  Before yesterday, I used only lower case letters, numbers, dot (.) and underscore(_) for directories and file naming. Today I would like to start using more special characters. Which ones are safe (by safe I mean I will never have any problem)? ps : I can't believe this question hasn't been asked already on this site, but I've searched for the word "naming" and read canonical questions without success (mosts are about computer names). Edit #1 : (btw, I don't use upper case letters for file names. I don't remember why. But since a few month, I have production problems with upper case letters : Some OS do not support ascii!) Here's what happened yesterday at work : As usual, I had to create a self signed SSL certificate. As usual, I used the name of the website for the files : www2.example.com.key www2.example.com.crt www2.example.com.csr. Then comes the problem : Generate a wildcard self signed certificate. I did that and named the files example.com.key example.com.crt example.com.csr, which is misleading (it's a certificate for *.example.com). I came back home, started putting some stars in apache configuration files filenames and see if it works (on a useless home computer, not even stagging). Stars in file names really scares me : Some coworkers/vendors/... can do some script using rm find xarg that would lead to http://www.ucs.cam.ac.uk/support/unix-support/misc/horror, and already one answer talks about disaster. Edit #2 : Just figured that : does not need to be escaped. Anyone knows why it is not used in file names?

  Read the article

• Can't access apache from outsite my local network

  - by valter

  UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

  Read the article

• Anonymizing OpenVPN Allow SSH Access to Internal Server

  - by Lionel

  I'm using an anonymizing VPN, but want SSH access to internal computer. How do I access my internal computer through SSH? When I do ssh 98.123.45.6, the connection times out. IP address from cable provider: 98.123.45.6 Anonymous IP through VPN: 50.1.2.3 Internal computer: 192.168.1.123 When searching around, I found recommendations to either set up iptables rules, routing rules, or to add ListenAddress to sshd_config. Which of these applies to my case? Here is my route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.115.81.1 10.115.81.9 255.255.255.255 UGH 0 0 0 tun0 10.115.81.9 * 255.255.255.255 UH 0 0 0 tun0 50.1.2.3-sta ddwrt 255.255.255.255 UGH 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 202 0 0 eth0 169.254.0.0 * 255.255.0.0 U 204 0 0 vboxnet0 loopback * 255.0.0.0 U 0 0 0 lo default 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 128.0.0.0 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 default ddwrt 0.0.0.0 UG 202 0 0 eth0

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Monitor programs accessing my keyboard?

  - by Anti Earth

  As of a few days ago, my computer is behaving 'erratically'. When I am typing, my pointer will randomly move to another place in the text and start typing a semi-random string of characters. ("gvyfn" is common; It has typed this about 8 times whilst I composed all the text above) It often highlights part of or all the text and overwrites it. It sometimes goes into loops of pressing Control-alt-delete down, bringing up Windows 7 menu thing. It sometimes even messes with mouseclicks; they have unexpected results, like requesting admin priveledges from applications, instead of switching to their window. I believe this is because it is holding a alt-function key down. This behaviour happens periodically, in waves. It might subside for an hour, then continue to haunt me. I believe it to be a virus or malicious program. My anti-virus (Symantec) and multiply MS rootkit removers could not find anything suspicious. I've noticed that sometimes it re-maps keys, and types gibberish when I press certain keys (though no pattern is evident). I believe a malicious program has installed a keyhook on my computer. I'm wondering... - Is there a way to let me view which programs are emulating keystrokes? - Is there a way to view what keyboard hooks are installed? (I'm also at liberty to try any other techniques to remove this blasted thing. It is easily the most fustrating computer problem I've encountered). Thanks!

  Read the article

• Two Way Sync of folder on PC to USB Thumb Drive over the internet.

  - by Tim Santeford

  Before flagging as duplicate please note that other similar posts do not have the same criteria below. Thanks Im looking for an app that will let me automatically sync a usb drive with a folder on my home system over the internet. I would like to roam from computer to computer and run this syncing app from the usb drive. Im looking for the same functionally as DropBox but without the 2gb restriction and without the need to fully install. Two Way sync between a usb drive and pc over the net Utilizes the full size of the usb drive not limited by an online storage size. (I dont need online backup or versioning) Allows the removal of the usb drive, Plugging it in to another computer will resume its sync. While the drive is connected the app should run silently keeping changed files in sync. (I dont want to run a manual process other than simply starting the app) Must be able to run as a portable app from the usb drive but can fully install on home pc. Window 7 Support is preferable. Please let me know if such and awesome app exists. TIA!

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• Windows user moving to Ubuntu 12.04. Where are the system tools, or equivalents?

  - by Big Endian

  I am a Windows user who has begun experimenting with Ubuntu. Ubuntu seems great, but for all the things it seems like I CAN'T do. How do I get to advanced administration stuff, like the list of drivers, all of the installed software, and something equivalent to Windows' Device Manager. I always heard that Linux was supposed to be very raw, and you had to have lots of computer experience to make it work. This seems just the opposite. Ubuntu seems very modern and user friendly, better in some regards than any operating system I have seen. Unfortunately, I can't find any of the guts of this system beneath all of the user friendly frosting... gunk... crap... stuff. I'm reminded more and more of an Apple computer (except Linux is more affordable :). So how do I peel back this layer and start using the computer? A solution other than installing Gnome 3 would be appreciated.

  Read the article

• How to manage enterprise network of Linux machines?

  - by killy9999

  I work at the university. In my institute we have six computer laboratories used for teaching. Each lab has almost 20 computers, which gives over 100 machines total. Computers have either Windows XP or Windows 7 Eneterprise operating system. We use Symantec Ghost to manage all the computers. Each computer has a Ghost client installed, which allows to control computers over network. Every six months we restore a master image on one of the computers in a lab, update that image and distribute it over the network to all computers in a laboratory. Thanks to Ghost client this is done automatically with just a few clicks. Recently I suggested that it would be good to have Linux installed in the laboratories. The administrators were concerned that we would not be able to manage that many computers if each would have to be updated manually. The question is: how to manage such a huge network of Linux machines in an automated way? To make the description of our network more complete I'll add that all students have their accounts (about few thousand users) on a central server. These are accessed via LDAP. To use a computer in laboratory each student has to log in using his own account.

  Read the article

• Django-admin.py not working (-bash:django-admin.py: command not found)

  - by Diego

  I'm having trouble getting django-admin.py to work... it's in this first location: /Users/mycomp/bin/ but I think I need it in another location for the terminal to recognize it, no? Noob, Please help. Thanks!! my-computer:~/Django-1.1.1 mycomp$ sudo ln -s /Users/mycomp/bin/django-admin.py /Users/mycomp/django-1.1.1/django-admin.py Password: ln: /Users/mycomp/django-1.1.1/django-admin.py: File exists my-computer:~/Django-1.1.1 mycomp$ django-admin.py --version -bash: django-admin.py: command not found

  Read the article

• Problem deploying VSTO office addin

  - by zeocrash

  I'm having some issues deploying a visio addin. running the VSTO file works on my computer, but whenever i try and move it to any other user's computer it throws an error on deployment. I thought it might be a setting i'd set in the porject properties so i created an entirely new plugin project and set it to display a message box on startup. The error i'm getting is "the expected element "addin" was not found in the xml"

  Read the article

• Find the ip rang

  - by Nikunj Shingala

  Hi, Please Help me, I want to one example to find the range of ip address and find the computer of between the two ip address how many computer and also use the subnet using the java so please give me a example. I think in here use of IpClass but I have no any example then please give me help.. Thanks

  Read the article

• PowerShell Advanced Function get current ParameterSetName

  - by spoon16

  In C# you can get the current ParameterSetName in the ProcessRecord override of a PowerShell Cmdlet with code like this: switch (ParameterSetName) { case FromUriParamSetName: loadFromUri(); break; case FromFileParamSetName: loadFromFile(); break; } I'm trying to figure out how I can get the value for ParameterSetName in a script cmdlet (Advanced Function).

  Read the article

• Selenium IDE - There was an unexpected Confirmation!

  - by Ula Krukar

  I have a button that displays Javascript confirmation popup. This is a part of my test case: <tr <tdclickAndWait</td <tdbuttonId</td <td</td </tr <tr <tdverifyTextPresent</td <tdObject has been deleted</td <td</td </tr It works as expected: OK is clicked automatically on a popup and verifyTextPresent return true. Still, I get [error] There was an unexpected Confirmation! in the log and test case fails. Any suggestions?

  Read the article

• How to use custom masks in MaskedEditExtender?

  - by bastos.sergio

  Hello, I need to create a textbox which accepts 3 chars and must follow the following format 1st char - only numbers 2nd char - only upper case letters 3rd char - numbers and upper case letters (except zero) This is what I have so far, but it's not working <ajaxToolkit:MaskedEditExtender ID="MaskedEditExtender1" runat="server" Mask="9L9" TargetControlID="txtNUIPC3" PromptCharacter=""> </ajaxToolkit:MaskedEditExtender>

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >