Search Results

Search found 14402 results on 577 pages for 'interface builder'.

Page 255/577 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• could corosync can support unicast heartbeat mode?

  - by Emre He

  could corosync can support unicast heartbeat mode? from another thread in serverfault, some guy raised below corosync conf: totem { version: 2 secauth: off interface { member { memberaddr: 10.xxx.xxx.xxx } member { memberaddr: 10.xxx.xxx.xxx } ringnumber: 0 bindnetaddr: 10.xxx.xxx.xxx mcastport: 694 } transport: udpu } is this conf type means unicast mode? thanks, Emre

  Read the article

• Need help making site available externally

  - by White Island

  I'm trying to open a hole in the firewall (ASA 5505, v8.2) to allow external access to a Web application. Via ASDM (6.3?), I've added the server as a Public Server, which creates a static NAT entry [I'm using the public IP that is assigned to 'dynamic NAT--outgoing' for the LAN, after confirming on the Cisco forums that it wouldn't bring everyone's access crashing down] and an incoming rule "any... public_ip... https... allow" but traffic is still not getting through. When I look at the log viewer, it says it's denied by access-group outside_access_in, implicit rule, which is "any any ip deny" I haven't had much experience with Cisco management. I can't see what I'm missing to allow this connection through, and I'm wondering if there's anything else special I have to add. I tried adding a rule (several variations) within that access-group to allow https to the server, but it never made a difference. Maybe I haven't found the right combination? :P I also made sure the Windows firewall is open on port 443, although I'm pretty sure the current problem is Cisco, because of the logs. :) Any ideas? If you need more information, please let me know. Thanks Edit: First of all, I had this backward. (Sorry) Traffic is being blocked by access-group "inside_access_out" which is what confused me in the first place. I guess I confused myself again in the midst of typing the question. Here, I believe, is the pertinent information. Please let me know what you see wrong. access-list acl_in extended permit tcp any host PUBLIC_IP eq https access-list acl_in extended permit icmp CS_WAN_IPs 255.255.255.240 any access-list acl_in remark Allow Vendor connections to LAN access-list acl_in extended permit tcp host Vendor any object-group RemoteDesktop access-list acl_in remark NetworkScanner scan-to-email incoming (from smtp.mail.microsoftonline.com to PCs) access-list acl_in extended permit object-group TCPUDP any object-group Scan-to-email host NetworkScanner object-group Scan-to-email access-list acl_out extended permit icmp any any access-list acl_out extended permit tcp any any access-list acl_out extended permit udp any any access-list SSLVPNSplitTunnel standard permit LAN_Subnet 255.255.255.0 access-list nonat extended permit ip VPN_Subnet 255.255.255.0 LAN_Subnet 255.255.255.0 access-list nonat extended permit ip LAN_Subnet 255.255.255.0 VPN_Subnet 255.255.255.0 access-list inside_access_out remark NetworkScanner Scan-to-email outgoing (from scanner to Internet) access-list inside_access_out extended permit object-group TCPUDP host NetworkScanner object-group Scan-to-email any object-group Scan-to-email access-list inside_access_out extended permit tcp any interface outside eq https static (inside,outside) PUBLIC_IP LOCAL_IP[server object] netmask 255.255.255.255 I wasn't sure if I needed to reverse that "static" entry, since I got my question mixed up... and also with that last access-list entry, I tried interface inside and outside - neither proved successful... and I wasn't sure about whether it should be www, since the site is running on https. I assumed it should only be https.

  Read the article

• Reinstallation version Windows 7?

  - by DWBrayton

  I ordered a Windows 7 Home Premium 32bit os online and just received a DVD & Key Code sticker. The DVD label shows it to be a reinstallation DVD, Windows 7 Home Premium 32-bit Dell branded and states that the DVD is only to be used to reinstall the OS on a Dell PC. I built this PC & it previously has had XP Pro installed for the last several years. A couple of weeks ago I had a problem with some Malware & made the mistake of attempting to reinstall the XP Pro only to find out that MS has locked out my key, the same one I have been using on this built PC for the last 3 years. The previous PC was built by a local PC builder & I just reinstalled the OS on the new system. Should I send this Win7 DVD back to where I bought it, or can I use it? What a mess, Thanks DWB

  Read the article

• Multithread http downloader with webui [closed]

  - by kiler129

  I looking for software similar to JDownloader or PyLoad. JD is pretty good but use heavy Java and for now have very weak web interface. PyLoad is awesome, include simple but powerful web-UI but downloading 10 files (10 threads each, so summary it's 100 connections running at around 8MB/s all) consume a lot of cpu - it's whole core for me. Do you know any lightweight alternatives? Aria2c is good for console but I failed to find any good webui, official one is good but after adding more files almost crashes Chrome :)

  Read the article

• IEEE 1394 Firewire Card is not visible in Device Manager in WIndows 7

  - by Shyam

  I have a IEEE 1394 card that I have placed in one of the PCI slots of my Windows 7 PC. I have moved to Windows just last week and Windows is not detecting this card. It is not listed in the Devide Manager. Earlier when I used Fedora 12, I was able to use this interface for capturing videos from my DV Camera. The manufacturer is Tech-Com, which has not provided a driver CD for this. What can I possibly try?

  Read the article

• Error while bringing up eth1

  - by mhay

  I'm getting this error while bringing up my network card: (process:2550): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/3: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist I'm using the following commands: 1. ifup eth1 2. /etc/init.d/network restart I have installed a fresh copy of Centos 6.2 and configured the network card.

  Read the article

• Password protect with apache2.conf works on files, but not on ports

  - by Camran

  I have changed the apache2.conf so that my website requires authentication. This works fine when typing the adress like this: www.domain.com or my_ip/ Problem is, I have Solr, which admin interface is on port 8983, so this: www.domain.com:8983/ does not require authorization. How can I add this port to also be authorized? Thanks

  Read the article

• Language pack can not be installed on 2008 server

  - by erik-van-gorp

  I installed Windows 2008 server R2 standard from the CD (english), applied updates and now I need to Install the Dutch language interface. It is provided on the DVD, but refuses to install, telling me it is incompatibel with this version of Windows. Where can I get the right version ?

  Read the article

• How to strip outgoing mail headers in postfix?

  - by Yegor

  I have a mail server running on my box. I have webmail access, as well as ability to send mail thru a client. When I send mail thru a web interface (roundcube) it attaches its own headers, so the sender is kept anonymous. When sending mail thru Outlook, or Thunderbird, it attaches its own header, which lists the IP address, computer name, etc. Is there a way to ahve postfix strip these outgoing headers, and replace them with the standard "web mail" header that I get with roundcube?

  Read the article

• Are FC and SAS DAS devices standard enough?

  - by user222182

  Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

  Read the article

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• CLI Text editor with rtf capabilities for Windows

  - by dassouki

  I'm looking for a command line interface program that gives me the ability to write formatted text easily interoperable with MS Word and OpenOffice. I figured RTF would be the common ground. An example of what I was hoping for would be: [Heading 1] Hello Heading [Paragraph Style 1] My name is hello world, I'm awesome.

  Read the article

• My facebook blocking ACL has stopped working

  - by Josh

  This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

  Read the article

• Editing/Saving Files live on unix server

  - by Luke

  I can connect remotely to my unix server via SSH, both ftp and shell mode using port 22. However I am not able to do so in Visual Studio. I want to be able to edit files live in a GUI interface. Any solutions for this? Thanks!

  Read the article

• Personal email server

  - by celil

  I would like to set up a personal email server. I am currently using Gmail, but I am becoming increasingly concerned at the amount of data that I share with Google. I would like to migrate all of my email to my personal server. Is there an easy to use, secure, open source alternative to Gmail that can be ran on personal servers? I do not need a web interface to my email as I usually access it via IMAP.

  Read the article

• Personal email server

  - by celil

  I would like to set up a personal email server. I am currently using Gmail, but I am becoming increasingly concerned at the amount of data that I share with Google. I would like to migrate all of my email to my personal server. Is there an easy to use, secure, open source alternative to Gmail that can be ran on personal servers? I do not need a web interface to my email as I usually access it via IMAP.

  Read the article

• Is there a CLI client for Skype chat conversations?

  - by Daren Thomas

  I'm looking for an interface to Skype that I can run in a CLI on windows (cmd.exe). All I really need is access to my IM conversations. Is there such a beast? Or is there an API for creating such a beast?

  Read the article

• How can I connect to weblogic JMX via an SSH tunnel?

  - by Zubair

  I am trying to connect to weblogic via an SSH tunnel. When I connect to the web interface it works fine, but when I try to connect via JMX I get the message: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://127.0.0.1:7001: Bootstrap to 127.0.0.1/127.0.0.1:7001 failed. It is likely that the remote side declared peer gone on this JVM] Does anyone know what this means?

  Read the article

• Routers with decent parental monitoring / traffic logging?

  - by antiver

  I'm looking for consumer router / firmware recommendations with reasonably robust remote URL / hostname logging & reporting functionality. Most logging functionality I've seen is terrible - reporting only IP addresses, not rolling up reports or reporting any useful statistics. The logs are also often limited to merely the last few minutes/hours when handling high-traffic loads. Bonus points for providing a screenshot of the log reporting interface!

  Read the article

• Telnet or SSH to Embedded Linux based NAS?

  - by ef2011

  Do you happen to know whether it is possible to telnet or SSH to LG N1A1DD1 NAS? It seems to have lots of features that I don't need (including FTP) but I couldn't find any mention of the ability to telnet or SSH to it. If telneting or SSH-ing to it isn't possible, do you know whether it is possible to configure via its web interface a script that can periodically back it up via its USB port? (while still functioning as NAS, of course)

  Read the article

• Block Skype on Cisco IOS

  - by ensnare

  I'm trying to block skype via policy routing but it's not working ... here's my configuration: class-map match-any block match protocol skype policy-map QoS-Priority-Input class block police 1000000 31250 31250 conform-action drop exceed-action drop violate-action drop policy-map QoS-Priority-Output class block police 1000000 31250 31250 conform-action drop exceed-action drop violate-action drop interface FastEthernet4 description WAN service-policy input QoS-Priority-Input service-policy output QoS-Priority-Output

  Read the article

• is it possible to set an Ubuntu Server in a computer with no mouse, keyboard or monitor?

  - by Manuel

  Yeah, that´s my question. I want the computer only to have a power source and a network cable. If so, can I install and configure everything from the network interface, or do I need to connect a monitor, etc. to configure everything and then I can unplug them? Thanks! tell me if the question is unclear! Manuel

  Read the article

• Collectd agent, Munin master

  - by blauwblaatje

  For monitoring and graphing of servers and services, I would like to make a setup where collectd is the agent, collecting the data on the server, and munin is on the monitoring server, collecting the data from the agents an process it. Reasons for this setup, is that collectd had a smaller footprint on the servers and munin (v2) has a better frontend. I was wondering if there's an interface for this connection, or if someone has an opinion about why I shouldn't do this.

  Read the article

• Selecting a Color Selector

  - by RCIX

  I'm looking for a nice full featured color selector program, i currently use Color Cop but i feel its missing some features (mainly a nice interface for selecting a color from a spectrum). Does anyone have any other suggestions?

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >