Search Results

Search found 8725 results on 349 pages for 'beginning steps'.

Page 257/349 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

• What could cause a dual-monitor PC to suddenly stop using one of the screens?

  - by raldi

  I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

  Read the article

• Cancelling Window 7 shutdown diables power button

  - by Jens

  Normally, pressing the power button once initiates a shut-down in Windows 7. If any programs are still running that will not quit (e.g. waiting for a dialogue response), Windows overlays the screen with a dialogue allowing the user to cancel the shut-down. I've just noticed that on two different systems here, using this cancel option disables the shut-down via power button. The power button can still be used to kill the system by holding it for a few seconds, using the Start menu button to shut the PC down still works as well. Steps to reproduce: Open Notepad, type a few characters. Do not save. Press the computer's power button. Wait until the dark screen appears. Press cancel. Press the power button again. Notice how nothing happens. What is the reason for this behaviour, and can it be disabled to always try and shut down the PC when the power button is pressed?

  Read the article

• Amazon EC2 - Free memory

  - by Damo

  We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

  Read the article

• How to train users converting from PC to Mac/Apple at a small non profit?

  - by Everette Mills

  Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

  Read the article

• Apache downloads php files instead of running their source

  - by Devils Child

  I have just recently upgraded PHP 5.3 to 5.4 on my Debian Squeeze server. Now, instead of executing PHP files, Apache just downloads them, which is really bad. When I try to follow these steps, I get "broken packages" upon installing the libapache2-mod-php5 package. Also the answer tells me to add something to my httpd.conf, but it's empty. Question: How can I make apache execute php files again, instead of just passing them through as download? dpkg -l | grep php returns this rc libapache2-mod-php5 5.3.3-7+squeeze15 server-side, HTML-embedded scripting language (Apache 2 module) rc php5-cli 5.3.3-7+squeeze15 command-line interpreter for the php5 scripting language ii php5-common 5.4.15-1~dotdeb.2 Common files for packages built from the php5 source rc php5-gd 5.3.3-7+squeeze15 GD module for php5 rc php5-mcrypt 5.3.3-7+squeeze15 MCrypt module for php5 rc php5-mysql 5.3.3-7+squeeze15 MySQL module for php5 rc php5-suhosin 0.9.32.1-1 advanced protection module for php5 rc phpmyadmin 4:3.3.7-7 MySQL web administration tool And apt-get install libapache2-mod-php5 produces this error The following packages have unmet dependencies: libapache2-mod-php5 : Depends: libdb5.1 but it is not installable Depends: libssl1.0.0 (>= 1.0.0) but it is not installable Depends: libxml2 (>= 2.8.0) but 2.7.8.dfsg-2+squeeze7 is to be installed Recommends: php5-cli but it is not going to be installed E: Broken packages

  Read the article

• VMware ESX Linux Guest Customization

  - by andyh_ky

  Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

  Read the article

• Folder Sharing NTFS permissions with Share Permission

  - by Muhammad Adly

  i have a problem on my domain, the history starting from when i had a server with WIN 2008 r2 installed with the following roles installed on it (AD, DNS, DHCP, File). From 1 month i decided to install a new server 2008 r2 server to get (AD, DNS, DHCP) and leave the file server on the old one. i did the following exactly: 1) robocopy all my data on external HDD 2) Install a new server with 2008 r2 3) transfer all 5 roles to transfer the domain to the new server (MainDC) 4) issue (NETLOGON, SYSVOL) not transferred but i decided to reinitialize them again an now they are operating (MainDC) 5) re-create and re-configure a new GPOs and link it to my OUs 6) reinstall Old server operating system with a fresh installation of WIN 2008 R2 (FileServer) 7) join my domain with my domain credentials. the issue when i tried to share folder on \fileserver the permissions that i had set in sharing permissions are applied on the main shared folder and subfolders. the security settings are not applied. i.e. Say i'm sharing \fileserver\MainFolder with sharing permission for Authenticated Users that can read, so every one can read this main shared folder, if i set security permission for \fileserver\MainFolder\User1 that User1 can Read\Write\Modify. User1 can not perform this processes when accessing it from Network Share, i tried alot of steps from topics online get ownership for folder, remove inheritance from parent folder, applying changes for child objects, i tried also to construct a new folder structure but also the same issue, i tried another host PC, also i get the same issue.

  Read the article

• php mail() function painfully slow on local development machine

  - by Michael B

  Background: If you have set up a local apache server for development purposes you may have run into the problem where sendmail takes a long time (at least one minute) to send emails. This is extremely frustrating if you are trying to debug a problem with an email you have generated. There are several forum posts on the internet that discuss this problem. However, none of theme described what to do in enough detail for my limited knowledge. Here are the steps that worked for me: 1) find your hostname (in case you've forgotten it) using this command: :~$ cat /hosts/hostname myhostname 2) edit the file /etc/hosts and make sure the first line is the following: 127.0.0.1 localhost.localdomain localhost myhostname 3) edit the sendmail configuration file ( /etc/mail/sendmail.cf in Ubuntu) and Uncomment the line #O HostsFile=/etc/hosts 4) Restart the computer. The computer should boot up much faster now and the mail() function should return almost immediately. HOWEVER, the emails won't actually be sent unless you follow step 5. 5) You must new use the sendmail '-f' option whenever using the mail function. For example: mail('[email protected]', 'the subject', 'the message', null, '[email protected]'); My question for my fellow serverfaulters is: What further changes can be made so that I don't have to use the sendmail -f option? Although it's not very hard to add the -f option, it is a problem when your CMS (such as Drupal) does not use the -f option when sending mail. You would need to hack a core module to add this option.

  Read the article

• How to configure SVN server for my own project

  - by user1729952

  I work with a team on an Android project using Eclipse IDE, we need to use a version control and we need to access the repo remotely, I have no experience using or installing servers, a little experience using SVN on Windows, but I still have problems connecting to it remotely. I need to use no-ip.com to change my IP, however; I failed to make VisualSVN server to work with no-ip. What options do I have? The best thing is to get it work with Windows if not, I have another computer that is running Ubuntu 12.4.1, I have installed apache2svn on it trying to get it work, the svn is installed, I went through tutorials to configure accessing protocols, but I can't figure out how to access it remotely from another computer? Can someone tell me the steps I need to get this job done and I can do my search for each step? (Please explain each step as some keywords or phrases I may not be familiar with) EDIT: Also worth noting, that my company has a website hosted on a remote server, can we use it as a repo? and how? It's running Linux

  Read the article

• mysqld - master to slave replication using rsync innodb, sequence number issues

  - by Luis

  I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

  Read the article

• Help - since adding an elastic load balancer to my EC2 web application I cannot connect with the MySQL database (not in AWS)

  - by undefined

  I have a web application that uses an EC2 instance to receive uploaded images, resize and store on S3 and update my MySQL database with the image record. This database is hosted outside Amazon Web Services and so obviously involves communication between the EC2 instance and the database. Images are posted to the upload server from a Flash client which receives the IP address of the upload server when it is loaded and so sends images to 1.12.23.34/resize_script.php This has worked great .. until i started to try and include a load balancer. Since the ELBs do not use an IP address but a DNS address I am now passing this to Flash. Now when I upload images I get the following response from the server - Could not connect to MySQL: Lost connection to MySQL server at 'reading initial communication packet', system error: 111 What might be causing the lost connection to MySQL server. Is there any additional steps I need to take to allow my upload servers to be load balanced? I have set the host property of my MySQL privileges for this user to % any pointers greatly appreciated thanks.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• Folder doesn't show up in explorer, cmd, and python even though I can access it, how can I fix this?

  - by Miebster

  I am accessing another computer on the network using a mapped network drive. The path looks like \\192.168.0.100\d$ which is mapped to my computer's "m" drive. I can access, view, create, delete, move, etc folders on this drive. However, some folders don't show up in windows explorer, even tho I can access them. Example: Lets say that M:\stuff\more_stuff is a directory. What I can't do: When windows explorer is pointed at M:\stuff I can't see more_stuff In cmd prompt pointed at M:\stuff "dir" doesn't find more_stuff In cmd prompt pointed at M:\stuff "dir /a" doens't find more_stuff In python, os.listdir at M:\stuff doens't find more_stuff What I can do: Typing M:\stuff\more_stuff into the address bar lets me access the folder like normal. Because there is no indication that this folder even exists, there could be more like them. I have no way of knowing how many folders are magically hidden on this mapped drive. What are some steps I can do to figure out why this folder is hidden? (With the end goal of making it no longer hidden).

  Read the article

• Reporting SQL Vulnerability [migrated]

  - by Ciaran87Bel

  My first post here so i'll hopefully keep it simple. I have just finished building a CMS targeted at a certain industry and built a test site to see how everything works. Anyway I wrote a program to check for sql injection vulnerabilities and the program followed a blog link to an external website. The program discovered that the external site had a massive vulnerability that left it open to practically anyone who could then access every bit of data on their MYSQL Server and run queries etc. The thing is this external site is the brand leader in their industry and do millions upon millions of sales per annum. I have tried contacting them to let them know and even went as far as contacting the company that built their platform but I was pretty much brushed off and haven't heard back from them. Their database would contain the details of hundreds of thousands of customers and all their data. I could easily make myself site admin etc in a few seconds but they won't listen to me even though I have offered to share the vulnerability with them and help in anyway I can. Is there anything else I can do because it is one of the biggest security risks I have ever personally come across. Is there any other steps I should take to report this? Thanks

  Read the article

• Can't install flash on Firefox or Chrome (but works fine on IE...)

  - by WP

  I'm using a work computer (Lenovo) that I recently got from my IT department to replace an old machine. When I installed Firefox and Chrome, I needed to install Adobe Flash. However, the installation has failed on several occasions. I've taken all the usual steps: closing all programs and windows, installing updates and restarting machine, etc, but still the installation does not work. The download manager and status bars say that installation is complete, but I still can't view flash sites on FF or Chrome. Flash is working fine on IE though. Last thing: when I reboot the first dialog box that comes up is from Adobe Download Manager, and it says "Please shut down Internet Explorer before uninstall can complete". I'm confused since a) I've just rebooted so have yet to start IE and b) why UNinstall? My company does not support non-IE browsers so I'm not getting much help from our IT department. If necessary I can post screenshots of error messages and stuff if it comes to that, but hopefully someone will be able to diagnose the problem before that's necessary as I'm not the most tech savvy (despite being a huge fan of reddit...)

  Read the article

• Socket.ReceiveAsync problem

  - by bartol

  Hi, I have a problem using SocketAsyncEventArgs model with .net sockets. Everything works great until the moment that the server wishes to close a client connection. I use following code for this: try { socket.Shutdown(SocketShutdown.Both); } catch { } // throws if client process has already closed finally { socket.Close(); } socket = null; Each connection is using two SocketAsyncEventArgs (one for send and one for receive) and after closing the connection they are returned to a pool from which they can be later reused. And here the problem starts, because when another connection is established and receive args are reused from the pool we get an exception: System.InvalidOperationException: "An asynchronous socket operation is already in progress using this SocketAsyncEventArgs instance."; at System.Net.Sockets.SocketAsyncEventArgs.StartOperationCommon(Socket socket) at System.Net.Sockets.Socket.ReceiveAsync(SocketAsyncEventArgs e) I've done some debugging and it appears that the connection closing code from the beginning of the question does not cancel Socket.ReceiveAsync operation that is in progress when the connection is closed. I've tried many combinations of Shutdown, Disconnect and Linger options for the socket but nothing worked. Any suggestions? Thanks

  Read the article

• MSAcpi_ThermalZoneTemperature class not showing actual temperature

  - by jchoudhury

  i want to fetch CPU Performance data in real time including temperature. i used the following code to get CPU Temperature: try { ManagementObjectSearcher searcher = new ManagementObjectSearcher("root\\WMI", "SELECT * FROM MSAcpi_ThermalZoneTemperature"); foreach (ManagementObject queryObj in searcher.Get()) { double temp = Convert.ToDouble(queryObj["CurrentTemperature"].ToString()); double temp_critical = Convert.ToDouble(queryObj["CriticalTripPoint"].ToString()); double temp_cel = (temp/10 - 273.15); double temp_critical_cel = temp_critical / 10 - 273.15; lblCurrentTemp.Text = temp_cel.ToString(); lblCriticalTemp.Text = temp_critical_cel.ToString(); } } catch (ManagementException e) { MessageBox.Show("An error occurred while querying for WMI data: " + e.Message); } but this code shows the temperature that is not the correct temperature. It ususally shows 49.5-50.5 degrees centigrade. But I used "OpenHardwareMonitor" that report CPU temperature over 71 degree centigrade and changing fractions along with time fractions. is there anything I am missing in the code? I used the above code in timer_click event for every 500ms interval to refresh the temperature reading but it's always showing the same temperature from the beginning of execution. That implies if you run this application and if it shows 49 degree then after 1 hour session, it'll constantly show 49 degree. Where is the problem? please help. Thanks in advance.

  Read the article

• HTML Agility Pack - ReplaceNode doesn't change the InnerHTML of the Body

  - by morsanu

  Hi there, I have this The body: <body><p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent leo leo, ultrices eu venenatis et, rutrum fringilla dolor.</p></body> The code: HtmlNode body = doc.DocumentNode.SelectSingleNode("//body"); Dictionary<HtmlNode, HtmlNode> toReplace = new Dictionary<HtmlNode, HtmlNode>(); // I do some logic here adding nodes to the toReplace dictionary. foreach (HtmlNode replaceNode in toReplace.Keys) { replaceNode.ParentNod.ReplaceChild(toReplace[replaceNode], replaceNode); } After i do this, the InnerHtml of the body node remains the same as from beginning, although the OutterHtml or the InnerText are showing the good result. Is there something wrong with my code? The result: // body.InnerHtml <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent leo leo, ultrices eu venenatis et, rutrum fringilla dolor.</p> // body.OutterHtml <body><p>Lorem ipsum dolor sit amet...</p></body>

  Read the article

• ImportError: No module named QtWebKit

  - by Hallik

  I am on centos5. I installed python26 source with a make altinstall. Then I did a: yum install qt4 yum install qt4-devel yum install qt4-doc From riverbankcomputing.co.uk I downloaded the source for sip 4.10.2, compiled and installed fine. Then from the same site I downloaded and compiled from source PyQt-x11-4.7.3 Both installs were using the python26 version (/usr/local/bin/python2.6). So configure.py, make, and make install worked with no errors. Finally, I tried to run this script, but got the error in the subject of this post: import sys import signal from PyQt4.QtCore import * from PyQt4.QtGui import * from PyQt4.QtWebKit import QWebPage def onLoadFinished(result): if not result: print "Request failed" sys.exit(1) #screen = QtGui.QDesktopWidget().screenGeometry() size = webpage.mainFrame().contentsSize() # Set the size of the (virtual) browser window webpage.setViewportSize(webpage.mainFrame().contentsSize()) # Paint this frame into an image image = QImage(webpage.viewportSize(), QImage.Format_ARGB32) painter = QPainter(image) webpage.mainFrame().render(painter) painter.end() image.save("output2.png") sys.exit(0) app = QApplication(sys.argv) signal.signal(signal.SIGINT, signal.SIG_DFL) webpage = QWebPage() webpage.connect(webpage, SIGNAL("loadFinished(bool)"), onLoadFinished) webpage.mainFrame().load(QUrl("http://www.google.com")) sys.exit(app.exec_()) Even in the beginning of the configure for pyqt4, I saw it say QtWebKit should be installed, but apparently it's not? What's going on? I just did a find, and it looks like it wasn't installed. What are my options? [root@localhost ~]# find / -name '*QtWebKit*' /root/PyQt-x11-gpl-4.7.3/sip/QtWebKit /root/PyQt-x11-gpl-4.7.3/sip/QtWebKit/QtWebKitmod.sip /root/PyQt-x11-gpl-4.7.3/cfgtest_QtWebKit.cpp

  Read the article

• Exporting makefile from Eclipse CDT

  - by Alex Farber

  I have C++ project in the Ubuntu OS, Eclipse CDT. My final goal is to build the project binaries for FreeBSD OS. The first test. I create simple C++ CDT project with main.cpp file: cout << "OK" << endl; and build it. Then I open Terminal window in Release directory: alex@alex-linux:~/workspace/HelloWorld/Release$ ls HelloWorld main.d main.o makefile objects.mk sources.mk subdir.mk alex@alex-linux:~/workspace/HelloWorld/Release$ rm HelloWorld main.d main.o alex@alex-linux:~/workspace/HelloWorld/Release$ ls makefile objects.mk sources.mk subdir.mk alex@alex-linux:~/workspace/HelloWorld/Release$ make Building file: ../main.cpp Invoking: GCC C++ Compiler g++ -O3 -Wall -c -fmessage-length=0 -MMD -MP -MF"main.d" -MT"main.d" -o"main.o" "../main.cpp" Finished building: ../main.cpp Building target: HelloWorld Invoking: GCC C++ Linker g++ -o"HelloWorld" ./main.o Finished building target: HelloWorld alex@alex-linux:~/workspace/HelloWorld/Release$ ./HelloWorld OK alex@alex-linux:~/workspace/HelloWorld/Release$ So far, so good. Now I copy the whole project tree to FreeBSD and trying to build it: $ cd /home/alex/project $ ls main.cpp release $ cd release $ ls makefile objects.mk sources.mk subdir.mk $ make "makefile", line 5: Need an operator "makefile", line 10: Need an operator "makefile", line 11: Need an operator "makefile", line 12: Need an operator CDT-generated makefile doesn't work. This is makefile beginning: $ Automatically-generated file. Do not edit! -include ../makefile.init RM := rm -rf $ All of the sources participating in the build are defined here -include sources.mk -include subdir.mk -include objects.mk ... Line 5 is -include ../makefile.init. Really, there is no such file. But it works by some way on Ubuntu computer. What is the trick, how can I build this? BTW, manually written makefile works: all: g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"main.d" -MT"main.d" -o"main.o" "../main.cpp" g++ -o"HelloWorld" ./main.o Note: $ in makefile is actually #, I replaced it because # creates formatting problems inside of stackoverflow pre block.

  Read the article

• Logging into StackOverflow.com and Meta.StackOverflow.com

  - by Tahir Hassan

  I have recently created a myopenid to log into stack overflow. This login works on stackoverflow.com but NOT on meta.stackoverflow.com. Why is this? This seems like it is a problem on (meta)stackoverflow's side rather than myopenid's side. When I attempt to login to meta.stackoverflow.com using myopenid login, I end up being redirected to a blank page with a very long query string. The url of the blank page is http://www.myopenid.com/server?... Secondly, my google login does not work. When I attempt to login to stackoverflow.com using my google login I end up seeing a blank page with a url beginning with http://stackoverflow.com/users/authenticate/?s... I am using Firefox 3.6.3 and I can successfully login to stackoverflow.com using myopenid but NOT with myopenid onto meta.stackoverflow.com and NOT with google onto stackoverflow.com. Please note that I would prefer to use my google login to login to stackoverflow. I only created myopenid account to get to the root of the problem. Stackoverflow should seriously consider giving users the option of having stackoverflow specific credentials because for me and I am sure countless others this openid thing don't work. (I know this should be posted in meta.stackoverflow.com but this requires a working openid, which I do not have).

  Read the article

• CSS window height problem with dynamic loaded css

  - by Michael Mao

  Hi all: Please go here and use username "admin" and password "endlesscomic" (without wrapper quotes) to see the web app demo. Basically what I am trying to do is to incrementally integrate my work to this web app, say, every nightly, for the client to check the progress. Also, he would like to see, at the very beginning, a mockup about the page layout. I am trying to use the 960 grid system to achieve this. So far, so good. Except one issue that when the "mockup.css" is loaded dynamically by jQuery, it "extends" the window to the bottom, something I do not wanna have... As an inexperienced web developer, I don't know which part is wrong. Below is my js: /* master.js */ $(document).ready(function() { $('#addDebugCss').click(function() { alertMessage('adding debug css...'); addCssToHead('./css/debug.css'); $('.grid-insider').css('opacity','0.5');//reset mockup background transparcy }); $('#addMockupCss').click(function() { alertMessage('adding mockup css...'); addCssToHead('./css/mockup.css'); $('.grid-insider').css('opacity','1');//set semi-background transparcy for mockup }); $('#resetCss').click(function() { alertMessage('rolling back to normal'); rollbackCss(new Array("./css/mockup.css", "./css/debug.css")); }); }); function alertMessage(msg) //TODO find a better modal prompt { alert(msg); } function addCssToHead(path_to_css) { $('<link rel="stylesheet" type="text/css" href="' + path_to_css + '" />').appendTo("head"); } function rollbackCss(set) { for(var i in set) { $('link[href="'+ set[i]+ '"]').remove(); } } Something should be added to the exteral mockup.css? Or something to change in my master.js? Thanks for any hints/suggestions in advance.

  Read the article

• Add new item to UITableView and Core Data as data source?

  - by David.Chu.ca

  I have trouble to add new item to my table view with core data. Here is the brief logic in my codes. In my ViewController class, I have a button to trigle the edit mode: - (void) toggleEditing { UITableView *tv = (UITableView *)self.view; if (isEdit) // class level flag for editing { self.newEntity = [NSEntityDescription insertNewObjectForEntityName:@"entity1" inManagedObjectContext:managedObjectContext]; NSArray *insertIndexPaths = [NSArray arrayWithObjects: [NSInextPath indexPathForRow:0 inSection:0], nil]; // empty at beginning so hard code numbers here. [tv insertRowsAtIndexPaths:insertIndexPaths withRowAnimation:UITableViewRowAnimationFade]; [self.tableView setEditing:YES animated:YES]; // enable editing mode } else { ...} } In this block of codes, I added a new item to my current managed object context first, and then I added a new row to my tv. I think that both the number of objects in my data source or context and the number of rows in my table view should be 1. However, I got an exception in the event of tabView:numberOfRowsInSection: Invalid update: invalid number of rows in section 0. The number of rows contained in an existing section after the update (0) must be equal to the number of rows contained in that section before the update (0), plus or minus the number of rows inserted or deleted from that section (1 inserted, 0 deleted). The exception was raised right after the delegate event: - (NSInteger) tableView:(UITableView *) tableView numberOfRawsInSection:(NSInteger) section { // fetchedResultsController is class member var NSFetchedResultsController id <NSFechedResultsSectionInfo> sectionInfo = [[fetchedResultsController sections] objectAtIndex: section]; NSInteger rows = [sectionInfo numberOfObjects]; return rows; } In debug mode, I found that the rows was still 0 and the event invoked after the the even of toggleEditing. It looks like that sectionInfo obtained from fetchedResultsController did not include the new entity object inserted. Not sure if I miss anything or steps? I am not sure how it works: to get the fetcedResultsController notified or reflect the change when a new entity is inserted into the current managed object context?

  Read the article

• Manually iterating over a selection of XML elements (C#, XDocument)

  - by user316117

  What is the “best practice” way of manually iterating (i.e., one at a time with a “next” button) over a set of XElements in my XDocument? Say I select the set of elements I want thusly: var elems = from XElement el in m_xDoc.Descendants() where (el.Name.LocalName.ToString() == "q_a") select el; I can use an IEnumerator to iterate over them, i.e., IEnumerator m_iter; But when I get to the end and I want to wrap around to the beginning if I call Reset() on it, it throws a NotSupportedException. That’s because, as the Microsoft C# 2.0 Specification under chapter 22 "Iterators" says "Note that enumerator objects do not support the IEnumerator.Reset method. Invoking this method causes a System.NotSupportedException to be thrown ." So what IS the right way of doing this? And what if I also want to have bidirectional iteration, i.e., a “back” button, too? Someone on a Microsoft discussion forum said I shouldn’t be using IEnumerable directly anyway. He said there was a way to do what I want with LINQ but I didn’t understand what. Someone else suggested dumping the XElements into a List with ToList(), which I think would work, but I wasn’t sure it was “best practice”. Thanks in advance for any suggestions!

  Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >