dedicated hosting - Page 259

Announcing Solaris Technical Track at NLUUG Spring Conference on Operating Systems

- by user9135656

The Netherlands Unix Users Group (NLUUG) is hosting a full-day technical Solaris track during its spring 2012 conference. The official announcement page, including registration information can be found at the conference page.This year, the NLUUG spring conference focuses on the base of every computing platform; the Operating System. Hot topics like Cloud Computing and Virtualization; the massive adoption of mobile devices that have their special needs in the OS they run but that at the same time put the challenge of massive scalability onto the internet; the upspring of multi-core and multi-threaded chips..., all these developments cause the Operating System to still be a very interesting area where all kinds of innovations have taken and are taking place.The conference will focus specifically on: Linux, BSD Unix, AIX, Windows and Solaris. The keynote speech will be delivered by John 'maddog' Hall, infamous promotor and supporter of UNIX-based Operating Systems. He will talk the audience through several decades of Operating Systems developments, and share many stories untold so far. To make the conference even more interesting, a variety of talks is offered in 5 parallel tracks, covering new developments in and also collaboration between Linux, the BSD's, AIX, Solaris and Windows. The full-day Solaris technical track covers all innovations that have been delivered in Oracle Solaris 11. Deeply technically-skilled presenters will talk on a variety of topics. Each topic will first be introduced at a basic level, enabling visitors to attend to the presentations individually. Attending to the full day will give the audience a comprehensive overview as well as more in-depth understanding of the most important new features in Solaris 11.NLUUG Spring Conference details:* Date and time: When : April 11 2012 Start: 09:15 (doors open: 8:30) End : 17:00, (drinks and snacks served afterwards)* Venue: Nieuwegein Business Center Blokhoeve 1 3438 LC Nieuwegein The Nederlands Tel : +31 (0)30 - 602 69 00 Fax : +31 (0)30 - 602 69 01 Email : [email protected] Route : description - (PDF, Dutch only)* Conference abstracts and speaker info can be found here.* Agenda for the Solaris track: Note: talks will be in English unless marked with 'NL'.1. Insights to Solaris 11 Joerg Moellenkamp - Solaris Technical Specialist Oracle Germany2. Lifecycle management with Oracle Solaris 11 Detlef Drewanz - Solaris Technical Specialist Oracle Germany3. Solaris 11 Networking - Crossbow Project Andrew Gabriel - Solaris Technical Specialist Oracle UK4. ZFS: Data Integrity and Security Darren Moffat - Senior Principal Engineer, Solaris Engineering Oracle UK5. Solaris 11 Zones and Immutable Zones (NL) Casper Dik - Senior Staff Engineer, Software Platforms Oracle NL6. Experiencing Solaris 11 (NL) Patrick Ale - UNIX Technical Specialist UPC Broadband, NLTalks are 45 minutes each.There will be a "Solaris Meeting point" during the conference where people can meet-up, chat with the speakers and with fellow Solaris enthousiasts, and where live demos or other hands-on experiences can be shared.The official announcement page, including registration information can be found at the conference page on the NLUUG website. This site also has a complete list of all abstracts for all talks.Please register on the NLUUG website.

Read the article

JavaOne 2012 Sunday Strategy Keynote

- by Janice J. Heiss

At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

Read the article

Part 1 - Load Testing In The Cloud

- by Tarun Arora

Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures. The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure. I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora. See you in Part II. Share this post : CodeProject

Read the article

Translating Your Customizations

- by Richard Bingham

This blog post explains the basics of translating the customizations you can make to Fusion Applications products, with the inclusion of information for both composer-based customizations and the generic design-time customizations done via JDeveloper. Introduction Like most Oracle Applications, Fusion Applications installs on-premise with a US-English base language that is, in Release 7, supported by the option to add up to a total of 22 additional language packs (In Oracle Cloud production environments languages are pre-installed already). As such many organizations offer their users the option of working with their local language, and logically that should also apply for any customizations as well. Composer-based UI Customizations Customizations made in Page Composer take into consideration the session LOCALE, as set in the user preferences screen, during all customization work, and stores the customization in the MDS repository accordingly. As such the actual new or changed values used will only apply for the same language under which the customization was made, and text for any other languages requires a separate upload. See the Resource Bundles section below, which incidentally also applies to custom UI changes done in JDeveloper. You may have noticed this when you select the “Select Text Resource” menu option when editing the text on a page. Using this ensures that the resource bundles are used, whereas if you define a static value in Expression Builder it will never be available for translation. Notice in the screenshot below the “What’s New” custom value I have already defined using the ‘Select Text Resource’ feature is internally using the adfBundle groovy function to pull the custom value for my key (RT_S_1) from the ComposerOverrideBundle. Figure 1 – Page Composer showing the override bundle being used. Business Objects Customizing the Business Objects available in the Applications Composer tool for the CRM products, such as adding additional fields, also operates using the session language. Translating these additional values for these fields into other installed languages requires loading additional resource bundles, again as described below. Reports and Analytics Most customizations to Reports and BI Analytics are just essentially reorganizations and visualizations of existing number and text data from the system, and as such will use the appropriate values based on the users session language. Where a translated value or string exists for that session language, it will be used without the need for additional work. Extending through the addition of brand new reports and analytics requires another method of loading the translated strings, as part of what is known as ‘Localizing’ the BI Catalog and Metadata. This time it is via an export/import of XML data through the BI Administrators console, and is described in the OBIEE Admin Guide. Fusion Applications reports based on BI Publisher are already defined in template-per-locale, and in addition provide an extra process for getting the data for translation and reloading. This again uses the standard resource bundle format. Loading a custom report is illustrated in this video from our YouTube channel which shows the screen for both setting the template local and running an export for translation. Fusion Applications Menus Whilst the seeded Navigator and Global Menu values are fully translated when the additional language is installed, if they are customized then the change or new menu item will apply universally, not currently per language. This is set to change in a future release with the new UI Text Editor feature described below. More on Resource Bundles As mentioned above, to provide translations for most of your customizations you need to add values to a resource bundle. This is an industry open standard (OASIS) format XML file with the extension .xliff, and store translated values for the strings used by ADF at run-time. The general process is that these values are exported from the MDS repository, manually edited, and then imported back in again.This needs to be done by an administrator, via either WLST commands or through Enterprise Manager as per the screenshot below. This is detailed out in the Fusion Applications Extensibility Guide. For SaaS environments the Cloud Operations team can assist. Figure 2 – Enterprise Manager’s MDS export used getting resource bundles for manual translation and re-imported on the same screen. All customized strings are stored in an override bundle (xliff file) for each locale, suffixed with the language initials, with English ones being saved to the default. As such each language bundle can be easily identified and updated. Similarly if you used JDeveloper to create your own applications as extensions to Fusion Applications you would use the native support for resource bundles, and add them into the faces-config.xml file for inclusion in your application. An example is this ADF customization video from our YouTube channel. JDeveloper also supports automatic synchronization between your underlying resource bundles and any translatable strings you add – very handy. For more information see chapters on “Using Automatic Resource Bundle Integration in JDeveloper” and “Manually Defining Resource Bundles and Locales” in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework. FND Messages and Look-ups FND Messages, as defined here, are not used for UI labels (they are known as ‘strings’), but are the responses back to users as a result of an action, such as from a page submit. Each ‘message’ is defined and stored in the related database table (FND_MESSAGES_B), with another (FND_MESSAGES_TL) holding any language-specific values. These come seeded with the additional language installs, however if you customize the messages via the “Manage Messages” task in Functional Setup Manager, or add new ones, then currently (in Release 7) you’ll need to repeat it for each language. Figure 3 – An FND Message defined in an English user session. Similarly Look-ups are stored in a translation table (FND_LOOKUP_VALUES_TL) where appropriate, and can be customized by setting the users session language and making the change in the Setup and Maintenance task entitled “Manage [Standard|Common] Look-ups”. Online Help Yes, in fact all the seeded help is applied as part of each language pack install as part of the post-install provisioning process. If you are editing or adding custom online help then the Create Help screen provides a drop-down of which language your help customization will apply to. This is shown in the video below from our YouTube channel, and obviously you’ll need to it for each language in use. What is Coming for Translations? Currently planned for Release 8 is something called the User Interface (UI) Text Editor. This tool will allow the editing of all the text shown on the pages and forms of Fusion Application. This will provide a search based on a particular term or word, say “Worker”, and will allow it to be adjusted, say to “Employee”, which then updates all the Resource Bundles that contain it. In the case of multi-language environments, it will use the users session language (locale) to know which Resource Bundles to apply the change to. This capability will also support customization sandboxes, to help ensure changes can be tested and approved. It is also interesting to note that the design currently allows any page-specific customizations done using Page Composer or Application Composer to over-write the global changes done via the UI Text Editor, allowing for special context-sensitive values to still be used. Further Reading and Resources The following short list provides the mains resources for digging into more detail on translation support for both Composer and JDeveloper customization projects. There is a dedicated chapter entitled “Translating Custom Text” in the Fusion Applications Extensibility Guide. This has good examples and steps for many tasks, especially administering resource bundles. Using localization formatting (numbers, dates etc) for design-time changes is well documented in the Fusion Applications Developer Guide. For more guidelines on general design-time globalization, see either the ‘Internationalizing and Localizing Pages’ chapter in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework (Oracle Fusion Applications Edition) or the general Oracle Database Globalization Support Guide. The Oracle Architecture ‘A-Team’ provided a recent post on customizing the user session timeout popup, using design-time changes to resource bundles. It has detailed step-by-step examples which can be a useful illustration.

Read the article

Use your own domain email and tired of SPAM? SPAMfighter FTW

- by Dave Campbell

I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

Read the article

Building an OpenStack Cloud for Solaris Engineering, Part 1

- by Dave Miner

One of the signature features of the recently-released Solaris 11.2 is the OpenStack cloud computing platform. Over on the Solaris OpenStack blog the development team is publishing lots of details about our version of OpenStack Havana as well as some tips on specific features, and I highly recommend reading those to get a feel for how we've leveraged Solaris's features to build a top-notch cloud platform. In this and some subsequent posts I'm going to look at it from a different perspective, which is that of the enterprise administrator deploying an OpenStack cloud. But this won't be just a theoretical perspective: I've spent the past several months putting together a deployment of OpenStack for use by the Solaris engineering organization, and now that it's in production we'll share how we built it and what we've learned so far.In the Solaris engineering organization we've long had dedicated lab systems dispersed among our various sites and a home-grown reservation tool for developers to reserve those systems; various teams also have private systems for specific testing purposes. But as a developer, it can still be difficult to find systems you need, especially since most Solaris changes require testing on both SPARC and x86 systems before they can be integrated. We've added virtual resources over the years as well in the form of LDOMs and zones (both traditional non-global zones and the new kernel zones). Fundamentally, though, these were all still deployed in the same model: our overworked lab administrators set up pre-configured resources and we then reserve them. Sounds like pretty much every traditional IT shop, right? Which means that there's a lot of opportunity for efficiencies from greater use of virtualization and the self-service style of cloud computing. As we were well into development of OpenStack on Solaris, I was recruited to figure out how we could deploy it to both provide more (and more efficient) development and test resources for the organization as well as a test environment for Solaris OpenStack.At this point, let's acknowledge one fact: deploying OpenStack is hard. It's a very complex piece of software that makes use of sophisticated networking features and runs as a ton of service daemons with myriad configuration files. The web UI, Horizon, doesn't often do a good job of providing detailed errors. Even the command-line clients are not as transparent as you'd like, though at least you can turn on verbose and debug messaging and often get some clues as to what to look for, though it helps if you're good at reading JSON structure dumps. I'd already learned all of this in doing a single-system Grizzly-on-Linux deployment for the development team to reference when they were getting started so I at least came to this job with some appreciation for what I was taking on. The good news is that both we and the community have done a lot to make deployment much easier in the last year; probably the easiest approach is to download the OpenStack Unified Archive from OTN to get your hands on a single-system demonstration environment. I highly recommend getting started with something like it to get some understanding of OpenStack before you embark on a more complex deployment. For some situations, it may in fact be all you ever need. If so, you don't need to read the rest of this series of posts!In the Solaris engineering case, we need a lot more horsepower than a single-system cloud can provide. We need to support both SPARC and x86 VM's, and we have hundreds of developers so we want to be able to scale to support thousands of VM's, though we're going to build to that scale over time, not immediately. We also want to be able to test both Solaris 11 updates and a release such as Solaris 12 that's under development so that we can work out any upgrade issues before release. One thing we don't have is a requirement for extremely high availability, at least at this point. We surely don't want a lot of down time, but we can tolerate scheduled outages and brief (as in an hour or so) unscheduled ones. Thus I didn't need to spend effort on trying to get high availability everywhere.The diagram below shows our initial deployment design. We're using six systems, most of which are x86 because we had more of those immediately available. All of those systems reside on a management VLAN and are connected with a two-way link aggregation of 1 Gb links (we don't yet have 10 Gb switching infrastructure in place, but we'll get there). A separate VLAN provides "public" (as in connected to the rest of Oracle's internal network) addresses, while we use VxLANs for the tenant networks. One system is more or less the control node, providing the MySQL database, RabbitMQ, Keystone, and the Nova API and scheduler as well as the Horizon console. We're curious how this will perform and I anticipate eventually splitting at least the database off to another node to help simplify upgrades, but at our present scale this works.I had a couple of systems with lots of disk space, one of which was already configured as the Automated Installation server for the lab, so it's just providing the Glance image repository for OpenStack. The other node with lots of disks provides Cinder block storage service; we also have a ZFS Storage Appliance that will help back-end Cinder in the near future, I just haven't had time to get it configured in yet.There's a separate system for Neutron, which is our Elastic Virtual Switch controller and handles the routing and NAT for the guests. We don't have any need for firewalling in this deployment so we're not doing so. We presently have only two tenants defined, one for the Solaris organization that's funding this cloud, and a separate tenant for other Oracle organizations that would like to try out OpenStack on Solaris. Each tenant has one VxLAN defined initially, but we can of course add more. Right now we have just a single /24 network for the floating IP's, once we get demand up to where we need more then we'll add them.Finally, we have started with just two compute nodes; one is an x86 system, the other is an LDOM on a SPARC T5-2. We'll be adding more when demand reaches the level where we need them, but as we're still ramping up the user base it's less work to manage fewer nodes until then.My next post will delve into the details of building this OpenStack cloud's infrastructure, including how we're using various Solaris features such as Automated Installation, IPS packaging, SMF, and Puppet to deploy and manage the nodes. After that we'll get into the specifics of configuring and running OpenStack itself.

Read the article

C#/.NET Little Wonders: Interlocked Read() and Exchange()

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Last time we discussed the Interlocked class and its Add(), Increment(), and Decrement() methods which are all useful for updating a value atomically by adding (or subtracting). However, this begs the question of how do we set and read those values atomically as well? Read() – Read a value atomically Let’s begin by examining the following code: 1: public class Incrementor 2: { 3: private long _value = 0; 4: 5: public long Value { get { return _value; } } 6: 7: public void Increment() 8: { 9: Interlocked.Increment(ref _value); 10: } 11: } 12: It uses an interlocked increment, as we discuss in my previous post (here), so we know that the increment will be thread-safe. But, to realize what’s potentially wrong we have to know a bit about how atomic reads are in 32 bit and 64 bit .NET environments. When you are dealing with an item smaller or equal to the system word size (such as an int on a 32 bit system or a long on a 64 bit system) then the read is generally atomic, because it can grab all of the bits needed at once. However, when dealing with something larger than the system word size (reading a long on a 32 bit system for example), it cannot grab the whole value at once, which can lead to some problems since this read isn’t atomic. For example, this means that on a 32 bit system we may read one half of the long before another thread increments the value, and the other half of it after the increment. To protect us from reading an invalid value in this manner, we can do an Interlocked.Read() to force the read to be atomic (of course, you’d want to make sure any writes or increments are atomic also): 1: public class Incrementor 2: { 3: private long _value = 0; 4: 5: public long Value 6: { 7: get { return Interlocked.Read(ref _value); } 8: } 9: 10: public void Increment() 11: { 12: Interlocked.Increment(ref _value); 13: } 14: } Now we are guaranteed that we will read the 64 bit value atomically on a 32 bit system, thus ensuring our thread safety (assuming all other reads, writes, increments, etc. are likewise protected). Note that as stated before, and according to the MSDN (here), it isn’t strictly necessary to use Interlocked.Read() for reading 64 bit values on 64 bit systems, but for those still working in 32 bit environments, it comes in handy when dealing with long atomically. Exchange() – Exchanges two values atomically Exchange() lets us store a new value in the given location (the ref parameter) and return the old value as a result. So just as Read() allows us to read atomically, one use of Exchange() is to write values atomically. For example, if we wanted to add a Reset() method to our Incrementor, we could do something like this: 1: public void Reset() 2: { 3: _value = 0; 4: } But the assignment wouldn’t be atomic on 32 bit systems, since the word size is 32 bits and the variable is a long (64 bits). Thus our assignment could have only set half the value when a threaded read or increment happens, which would put us in a bad state. So instead, we could write Reset() like this: 1: public void Reset() 2: { 3: Interlocked.Exchange(ref _value, 0); 4: } And we’d be safe again on a 32 bit system. But this isn’t the only reason Exchange() is valuable. The key comes in realizing that Exchange() doesn’t just set a new value, it returns the old as well in an atomic step. Hence the name “exchange”: you are swapping the value to set with the stored value. So why would we want to do this? Well, anytime you want to set a value and take action based on the previous value. An example of this might be a scheme where you have several tasks, and during every so often, each of the tasks may nominate themselves to do some administrative chore. Perhaps you don’t want to make this thread dedicated for whatever reason, but want to be robust enough to let any of the threads that isn’t currently occupied nominate itself for the job. An easy and lightweight way to do this would be to have a long representing whether someone has acquired the “election” or not. So a 0 would indicate no one has been elected and 1 would indicate someone has been elected. We could then base our nomination strategy as follows: every so often, a thread will attempt an Interlocked.Exchange() on the long and with a value of 1. The first thread to do so will set it to a 1 and return back the old value of 0. We can use this to show that they were the first to nominate and be chosen are thus “in charge”. Anyone who nominates after that will attempt the same Exchange() but will get back a value of 1, which indicates that someone already had set it to a 1 before them, thus they are not elected. Then, the only other step we need take is to remember to release the election flag once the elected thread accomplishes its task, which we’d do by setting the value back to 0. In this way, the next thread to nominate with Exchange() will get back the 0 letting them know they are the new elected nominee. Such code might look like this: 1: public class Nominator 2: { 3: private long _nomination = 0; 4: public bool Elect() 5: { 6: return Interlocked.Exchange(ref _nomination, 1) == 0; 7: } 8: public bool Release() 9: { 10: return Interlocked.Exchange(ref _nomination, 0) == 1; 11: } 12: } There’s many ways to do this, of course, but you get the idea. Running 5 threads doing some “sleep” work might look like this: 1: var nominator = new Nominator(); 2: var random = new Random(); 3: Parallel.For(0, 5, i => 4: { 5: 6: for (int j = 0; j < _iterations; ++j) 7: { 8: if (nominator.Elect()) 9: { 10: // elected 11: Console.WriteLine("Elected nominee " + i); 12: Thread.Sleep(random.Next(100, 5000)); 13: nominator.Release(); 14: } 15: else 16: { 17: // not elected 18: Console.WriteLine("Did not elect nominee " + i); 19: } 20: // sleep before check again 21: Thread.Sleep(1000); 22: } 23: }); And would spit out results like: 1: Elected nominee 0 2: Did not elect nominee 2 3: Did not elect nominee 1 4: Did not elect nominee 4 5: Did not elect nominee 3 6: Did not elect nominee 3 7: Did not elect nominee 1 8: Did not elect nominee 2 9: Did not elect nominee 4 10: Elected nominee 3 11: Did not elect nominee 2 12: Did not elect nominee 1 13: Did not elect nominee 4 14: Elected nominee 0 15: Did not elect nominee 2 16: Did not elect nominee 4 17: ... Another nice thing about the Interlocked.Exchange() is it can be used to thread-safely set pretty much anything 64 bits or less in size including references, pointers (in unsafe mode), floats, doubles, etc. Summary So, now we’ve seen two more things we can do with Interlocked: reading and exchanging a value atomically. Read() and Exchange() are especially valuable for reading/writing 64 bit values atomically in a 32 bit system. Exchange() has value even beyond simply atomic writes by using the Exchange() to your advantage, since it reads and set the value atomically, which allows you to do lightweight nomination systems. There’s still a few more goodies in the Interlocked class which we’ll explore next time! Technorati Tags: C#,CSharp,.NET,Little Wonders,Interlocked

Read the article

Testing Workflows – Test-First

- by Timothy Klenke

Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/05/30/testing-workflows-ndash-test-first.aspxThis is the second of two posts on some common strategies for approaching the job of writing tests. The previous post covered test-after workflows where as this will focus on test-first. Each workflow presented is a method of attack for adding tests to a project. The more tools in your tool belt the better. So here is a partial list of some test-first methodologies. Ping Pong Ping Pong is a methodology commonly used in pair programing. One developer will write a new failing test. Then they hand the keyboard to their partner. The partner writes the production code to get the test passing. The partner then writes the next test before passing the keyboard back to the original developer. The reasoning behind this testing methodology is to facilitate pair programming. That is to say that this testing methodology shares all the benefits of pair programming, including ensuring multiple team members are familiar with the code base (i.e. low bus number). Test Blazer Test Blazing, in some respects, is also a pairing strategy. The developers don’t work side by side on the same task at the same time. Instead one developer is dedicated to writing tests at their own desk. They write failing test after failing test, never touching the production code. With these tests they are defining the specification for the system. The developer most familiar with the specifications would be assigned this task. The next day or later in the same day another developer fetches the latest test suite. Their job is to write the production code to get those tests passing. Once all the tests pass they fetch from source control the latest version of the test project to get the newer tests. This methodology has some of the benefits of pair programming, namely lowering the bus number. This can be good way adding an extra developer to a project without slowing it down too much. The production coder isn’t slowed down writing tests. The tests are in another project from the production code, so there shouldn’t be any merge conflicts despite two developers working on the same solution. This methodology is also a good test for the tests. Can another developer figure out what system should do just by reading the tests? This question will be answered as the production coder works there way through the test blazer’s tests. Test Driven Development (TDD) TDD is a highly disciplined practice that calls for a new test and an new production code to be written every few minutes. There are strict rules for when you should be writing test or production code. You start by writing a failing (red) test, then write the simplest production code possible to get the code working (green), then you clean up the code (refactor). This is known as the red-green-refactor cycle. The goal of TDD isn’t the creation of a suite of tests, however that is an advantageous side effect. The real goal of TDD is to follow a practice that yields a better design. The practice is meant to push the design toward small, decoupled, modularized components. This is generally considered a better design that large, highly coupled ball of mud. TDD accomplishes this through the refactoring cycle. Refactoring is only possible to do safely when tests are in place. In order to use TDD developers must be trained in how to look for and repair code smells in the system. Through repairing these sections of smelly code (i.e. a refactoring) the design of the system emerges. For further information on TDD, I highly recommend the series “Is TDD Dead?”. It discusses its pros and cons and when it is best used. Acceptance Test Driven Development (ATDD) Whereas TDD focuses on small unit tests that concentrate on a small piece of the system, Acceptance Tests focuses on the larger integrated environment. Acceptance Tests usually correspond to user stories, which come directly from the customer. The unit tests focus on the inputs and outputs of smaller parts of the system, which are too low level to be of interest to the customer. ATDD generally uses the same tools as TDD. However, ATDD uses fewer mocks and test doubles than TDD. ATDD often complements TDD; they aren’t competing methods. A full test suite will usually consist of a large number of unit (created via TDD) tests and a smaller number of acceptance tests. Behaviour Driven Development (BDD) BDD is more about audience than workflow. BDD pushes the testing realm out towards the client. Developers, managers and the client all work together to define the tests. Typically different tooling is used for BDD than acceptance and unit testing. This is done because the audience is not just developers. Tools using the Gherkin family of languages allow for test scenarios to be described in an English format. Other tools such as MSpec or FitNesse also strive for highly readable behaviour driven test suites. Because these tests are public facing (viewable by people outside the development team), the terminology usually changes. You can’t get away with the same technobabble you can with unit tests written in a programming language that only developers understand. For starters, they usually aren’t called tests. Usually they’re called “examples”, “behaviours”, “scenarios”, or “specifications”. This may seem like a very subtle difference, but I’ve seen this small terminology change have a huge impact on the acceptance of the process. Many people have a bias that testing is something that comes at the end of a project. When you say we need to define the tests at the start of the project many people will immediately give that a lower priority on the project schedule. But if you say we need to define the specification or behaviour of the system before we can start, you’ll get more cooperation. Keep these test-first and test-after workflows in your tool belt. With them you’ll be able to find new opportunities to apply them.

Read the article

I'm a contract developer and I think I'm about to get screwed [closed]

- by kagaku

I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

Read the article

MySQL Utility Users' Console Oerview

- by rudrap

MySQL Utility Users' Console (mysqluc): The MySQL Utilities Users' Console is designed to make using the utilities easier via a dedicated console. It helps us to use the utilities without worrying about the python and utility paths. Why do we need a special console? - It does provide a unique shell environment with command completion, help for each utility, user defined variables, and type completion for options. - You no longer have to type out the entire name of the utility. - You don't need to remember the name of a database utility you want to use. - You can define variables and reuse them in your utility commands. - It is possible to run utility command along with mysqluc and come out of the mysqluc console. Console commands: mysqluc> help Command Description ---------------------- --------------------------------------------------- help utilities Display list of all utilities supported. help <utility> Display help for a specific utility. help or help commands Show this list. exit or quit Exit the console. set <variable>=<value> Store a variable for recall in commands. show options Display list of options specified by the user on launch. show variables Display list of variables. <ENTER> Press ENTER to execute command. <ESCAPE> Press ESCAPE to clear the command entry. <DOWN> Press DOWN to retrieve the previous command. <UP> Press UP to retrieve the next command in history. <TAB> Press TAB for type completion of utility, option,or variable names. <TAB><TAB> Press TAB twice for list of matching type completion (context sensitive). How do I use it? Pre-requisites: - Download the latest version of MySQL Workbench. - Mysql Servers are running. - Your Pythonpath is set. (e.g. Export PYTHONPATH=/...../mysql-utilities/) Check the Version of mysqluc Utility: /usr/bin/python mysqluc.py –version It should display something like this MySQL Utilities mysqluc.py version 1.1.0 - MySQL Workbench Distribution 5.2.44 Copyright (c) 2010, 2012 Oracle and/or its affiliates. All rights reserved. This program is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, to the extent permitted by law. Use of TAB to get the current utilities: mysqluc> mysqldb<TAB><TAB> Utility Description ------------- ------------------------------------------------------------ mysqldbcopy copy databases from one server to another mysqldbexport export metadata and data from databases mysqldbimport import metadata and data from files mysqluc> mysqldbcopy –source=$se<TAB> Variable Value -------- ---------------------------------------------------------------------- server1 root@localhost:3306 server2 root@localhost:3307 you can see the variables starting with se and then decide which to use Run a utility via the console: /usr/bin/python mysqluc.py -e "mysqldbcopy --source=root@localhost:3306 --destination=root@localhost:3307 dbname" Get help for utilities in the console: mysqluc> help utilities Display help for a utility mysqluc> help mysqldbcopy Details about mysqldbcopy and its options set variables and use them in commands: mysqluc> set server1 = root@localhost:3306 mysqluc>show variables Variable Value -------- ---------------------------------------------------------------------- server1 root@localhost:3306 server2 root@localhost:3307 mysqluc> mysqldbcopy –source=$server1 –destination=$server2 dbname <Enter> Mysqldbcopy utility output will display. mysqluc>show options Display list of options specified by the user mysqluc SERVER=root@host123 VAR_A=57 -e "show variables" Variable Value -------- ----------------------------------------------------------------- SERVER root@host123 VAR_A 57 Finding option names for an Utility: mysqluc> mysqlserverclone --n Option Description ------------------- --------------------------------------------------------- --new-data=NEW_DATA the full path to the location of the data directory for the new instance --new-port=NEW_PORT the new port for the new instance - default=3307 --new-id=NEW_ID the server_id for the new instance - default=2 Limitations: User defined variables have a lifetime of the console run time.

Read the article

The architecture and technologies to use for a secure, fast, reliable and easily scalable web application

- by DSoul

^ For actual questions, skip to the lists down below I understand, that his is a vague topic, but please, before you turn the other way and disregard me, hear me out. I am currently doing research for a web application(I don't know if application is the correct word for it, but I will proceed w/ that for now), that one day might need to be everything mentioned in the title. I am bound by nothing. That means that every language, OS and framework is acceptable, but only if it proves it's usefulness. And if you are going to say, that scalability and speed depend on the code I write for this application, then I agree, but I am just trying to find something, that wouldn't stand in my way later on. I have done quite a bit reading on this subject, but I still don't have a clear picture, to what suits my needs, so I come to you, StackOverflow, to give me directions. I know you all must be wondering what I'm building, but I assure you, that it doesn't matter. I have heard of 12 factor app though, if you have any similar guidelines or what is, to suggest the please, go ahead. For the sake of keeping your answers as open as possible, I'm not gonna provide you my experience regarding anything written in this question. ^ Skippers, start here First off - the weights of the requirements are probably something like that (on a scale of 10): Security - 10 Speed - 5 Reliability (concurrency) - 7.5 Scalability - 10 Speed and concurrency are not a top priority, in the sense, that the program can be CPU intensive, and therefore slow, and only accept a not-that-high number of concurrent users, but both of these factors must be improvable by scaling the system Anyway, here are my questions: How many layers should the application have, so it would be future-proof and could best fulfill the aforementioned requirements? For now, what I have in mind is the most common version: Completely separated front end, that might be a web page or an MMI application or even both. Some middle-ware handling communication between the front and the back end. This is probably a server that communicates w/ the front end via HTTP. How the communication w/ the back end should be handled is probably dependent on the back end. The back end. Something that handles data through resources like DB and etc. and does various computations w/ the data. This, as the highest priority part of the software, must be easily spread to multiple computers later on and have no known security holes. I think ideally the middle-ware should send a request to a queue from where one of the back end processes takes this request, chops it up to smaller parts and buts these parts of the request back onto the same queue as the initial request, after what these parts will be then handled by other back end processes. Something *map-reduce*y, so to say. What frameworks, languages and etc. should these layers use? The technologies used here are not that important at this moment, you can ignore this part for now I've been pointed to node.js for this part. Do you guys know any better alternatives, or have any reasons why I should (not) use node.js for this particular job. I actually have no good idea, what to use for this job, there are too many options out there, so please direct me. This part (and the 2. one also, I think) depend a lot on the OS, so suggest any OSs alongside w/ the technologies/frameworks. Initially, all computers (or 1 for starters) hosting the back end are going to be virtual machines. Please do give suggestions to any part of the question, that you feel you have comprehensive knowledge and/or experience of. And also, point out if you feel that any part of the current set-up means an instant (or even distant) failure or if I missed a very important aspect to consider. I'm not looking for a definitive answer for how to achieve my goals, because there certainly isn't one, for I haven't provided you w/ all the required information. I'm just looking for recommendations and directions on what to look into. Also, bare in mind, that this isn't something that I have to get done quickly, to sell and let it be re-written by the new owner (which, I've been told for multiple times, is what I should aim for). I have all the time in the world and I really just want to learn doing something really high-end. Also, excuse me if my language isn't the best, I'm not a native. Anyway. Thanks in advance to anyone, who takes the time to help me out here. PS. When I do seem to come up w/ a good architecture/design for this project, I will certainly make it an open project and keep you guys up to date w/ it's development. As in what you could have told me earlier and etc. For obvious reasons the very same question got closed on SO, but could you guys still help me?.

Read the article

Beyond Cloud Technology, Enabling A More Agile and Responsive Organization

- by sxkumar

This is the second part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain”. In the first part, I was sharing with you how a broad-based transformation makes cloud more than a technology initiative, I will describe in this section how it requires people (organizational) and process changes as well, and these changes are as critical as is the choice of right tools and technology. People: Most IT organizations have a fairly complex organizational structure. There are different groups, managing different pieces of the puzzle, and yet, they don't always work together. Provisioning a new application therefore may require a request to float endlessly through system administrators, DBAs and middleware admin worlds – resulting in long delays and constant finger pointing. Cloud users expect end-to-end automation - which requires these silos to be greatly simplified, if not completely eliminated. Most customers I talk to acknowledge this problem but are quick to admit that such a transformation is hard. As hard as it may be, I am afraid that the status quo is no longer an option. Sticking to an organizational structure that was created ages back will not only impede cloud adoption, it also risks making the IT skills increasingly irrelevant in a world that is rapidly moving towards converged applications and infrastructure. Process: Most IT organizations today operate with a mindset that they must fully "control" access to any and all types of IT services. This in turn leads to people clinging on to outdated manual approval processes . While requiring approvals for scarce resources makes sense, insisting that every single request must be manually approved defeats the very purpose of cloud. Not only this causes delays, thereby at least partially negating the agility benefits, it also results in gross inefficiency. In a cloud environment, self-service access should be governed by policies, quotas that the administrators can define upfront . For a cloud initiative to be successful, IT organizations MUST be ready to empower users by giving them real control rather than insisting on brokering every single interaction between users and the cloud resources. Technology: From a technology perspective, cloud is about consolidation, standardization and automation. A consolidated and standardized infrastructure helps increase utilization and reduces cost. Additionally, it enables a much higher degree of automation - thereby providing users the required agility while minimizing operational costs. Obviously, automation is the key to cloud. Unfortunately it hasn’t received as much attention within enterprises as it should have. Many organizations are just now waking up to the criticality of automation and it still often gets relegated to back burner in favor of other "high priority" projects. However, it is important to understand that without the right type and level of automation, cloud will remain a distant dream for most enterprises. This in turn makes the choice of the cloud management software extremely critical. For a cloud management software to be effective in an enterprise environment, it must meet the following qualifications: Broad and Deep Solution It should offer a broad and deep solution to enable the kind of broad-based transformation we are talking about. Its footprint must cover physical and virtual systems, as well as infrastructure, database and application tiers. Too many enterprises choose to equate cloud with virtualization. While virtualization is a critical component of a cloud solution, it is just a component and not the whole solution. Similarly, too many people tend to equate cloud with Infrastructure-as-a-Service (IaaS). While it is perfectly reasonable to treat IaaS as a starting point, it is important to realize that it is just the first stepping stone - and on its own it can only provide limited business benefits. It is actually the higher level services, such as (application) platform and business applications, that will bring about a more meaningful transformation to your enterprise. Run and Manage Efficiently Your Mission Critical Applications It should not only be able to run your mission critical applications, it should do so better than before. For enterprises, applications and data are the critical business assets As such, if you are building a cloud platform that cannot run your ERP application, it isn't truly a "enterprise cloud". Also, be wary of vendors who try to sell you the idea that your applications must be written in a certain way to be able to run on the cloud. That is nothing but a bogus, self-serving argument. For the cloud to be meaningful to enterprises, it should adopt to your applications - and not the other way around. Automated, Integrated Set of Cloud Management Capabilities At the root of many of the problems plaguing enterprise IT today is complexity. A complex maze of tools and technology, coupled with archaic processes, results in an environment which is inflexible, inefficient and simply too hard to manage. Management tool consolidation, therefore, is key to the success of your cloud as tool proliferation adds to complexity, encourages compartmentalization and defeats the very purpose that you are building the cloud for. Decision makers ought to be extra cautious about vendors trying to sell them a "suite" of disparate and loosely integrated products as a cloud solution. An effective enterprise cloud management solution needs to provide a tightly integrated set of capabilities for all aspects of cloud lifecycle management. A simple question to ask: will your environment be more or less complex after you implement your cloud? More often than not, the answer will surprise you. At Oracle, we have understood these challenges and have been working hard to create cloud solutions that are relevant and meaningful for enterprises. And we have been doing it for much longer than you may think. Oracle was one of the very first enterprise software companies to make our products available on the Amazon Cloud. As far back as in 2007, we created new cloud solutions such as Cloud Database Backup that are helping customers like Amazon save millions every year. Our cloud solution portfolio is also the broadest and most deep in the industry - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry. And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies. I will dedicated the third and final part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain” to Oracle Cloud Technologies Building Blocks and how they mapped into our vision of Enterprise Cloud. Stay Tuned.

Read the article

OpenVPN: Connection established but can’t connect to server

- by Maik

I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

Read the article

CentOS 5.4 NFS v4 client file permissions differ from original files & NFS Share file contents

- by p4guru

Having a strange problem with NFS share and file permissions on the 1 out of the 2 NFS clients, web1 has file permissions issues but web2 is fine. web1 and web2 are load balanced web servers. So questions are: how do I ensure NFS share file contents retain the same permissions for user/group as the original files on web1 server like they do on web2 server ? how do I reverse what I did on web1, i tried unmount command and said command not found ? Information: I'm using 3 dedicated server setup. All 3 servers CentOS 5.4 64bit based. servers are as follows: web1 - nfs client with file permissions issues web2 - nfs client file permissions are OKAY db1 - nfs share at /nfsroot web2 nfs client was setup by my web host, while web1 was setup by me. I did the following commands on web1 and it worked with updating db1 nfsroot share at /nfsroot/site_css with latest files on web1 but the file permissions don't stick even if i use tar with -p command to perserve file permissions ? cd /home/username/public_html/forums/script/ tar -zcp site_css/ > site_css.tar.gz mount -t nfs4 nfsshareipaddress:/site_css /home/username/public_html/forums/scripts/site_css/ -o rw,soft cd /home/username/public_html/forums/script/ tar -zxf site_css.tar.gz But checking on web1 file permissions no longer username user/group but owned by nobody ? but web2 file permissions correct ? This is only a problem for web1 while web2 is correct ? Looks like numeric ids aren't the same ? Not sure how to correct this ? web1 with incorrect user/group of nobody ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 nobody nobody 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Feb 22 02:43 ../ -rw-r--r-- 1 nobody nobody 1 Nov 30 2006 index.html -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-cc2f96c9-00011.css web1 numeric ids ls -n /home/username/public_html/forums/scripts/site_css total 48 drwxrwxrwx 2 99 99 4096 Feb 22 02:37 ./ drwxr-xr-x 3 503 500 4096 Feb 22 02:43 ../ -rw-r--r-- 1 99 99 1 Nov 30 2006 index.html -rw-r--r-- 1 99 99 5876 Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 99 99 5877 Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 99 99 5877 Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 99 99 5876 Feb 18 05:37 style-cc2f96c9-00011.css web2 correct username user/group permissions ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Dec 2 14:51 ../ -rw-r--r-- 1 username username 1 Nov 30 2006 index.html -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-cc2f96c9-00011.css web2 numeric ids ls -n /home/username/public_html/forums/scripts/site_css total 48 drwxrwxrwx 2 503 500 4096 Feb 22 02:37 ./ drwxr-xr-x 3 503 500 4096 Dec 2 14:51 ../ -rw-r--r-- 1 503 500 1 Nov 30 2006 index.html -rw-r--r-- 1 503 500 5876 Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 503 500 5877 Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 503 500 5877 Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 503 500 5876 Feb 18 05:37 style-cc2f96c9-00011.css I checked db1 /nfsroot/site_css and user/group ownership was incorrect for newer files dated feb22 owned by root and not username ? on db1 originally incorrect root assigned user/group for new feb22 dated files ls -alh /nfsroot/site_css total 44K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 . drwxr-xr-x 17 root root 4.0K Feb 17 12:06 .. -rw-r--r-- 1 root root 1 Nov 30 2006 index.html -rw-r--r-- 1 root root 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 root root 5.8K Feb 22 02:37 style-95001864-00002.css -rw------- 1 username nfs 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw------- 1 username nfs 5.8K Feb 18 05:37 style-cc2f96c9-00011.css Then I chmod them all on db1 and chown to set to right ownership on db1 so it looks like below on db1 once corrected the newer feb22 dated files ls -alh /nfsroot/site_css total 44K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 . drwxr-xr-x 17 root root 4.0K Feb 17 12:06 .. -rw-r--r-- 1 username username 1 Nov 30 2006 index.html -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-cc2f96c9-00011.css but still web1 shows owned by nobody ? while web2 shows correct permissions ? web1 still with incorrect user/group of nobody not matching what web2 and db1 are set to ? ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 nobody nobody 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Feb 22 02:43 ../ -rw-r--r-- 1 nobody nobody 1 Nov 30 2006 index.html -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-cc2f96c9-00011.css Just so confusing so any help is very very much appreciated! thanks

Read the article

SSL certificates and types for securing your websites and applications

- by Mit Naik

Need to share few information regarding SSL certificates and there types, which SSL certificates are widely used etc. There are several SSL certificates available in the market today inorder to secure your domains, multiple subdomains, your applications and code too. Few of the details are mentioned below. CheapSSL certificates available today are Standard Rapidssl certificate, Thwate SSL 123 etc certificates which are basic level certificates. Most of these cheap SSL certificates are domain-validated only and don't provide the greatest trust for your customers. This means you shouldn't use cheap SSL certificates on e-commerce stores or other public-facing sites that require people to trust the site. EV certificates I found Geotrust Truebusinessid with EV certificate which is one of the cheapest certificate available in market today, you can also find Thwate, Versign EV version of certificates. Its designed to prevent phishing attacks better than normal SSL certificates. What makes an EV Certificate so special? An SSL Certificate Provider has to do some extensive validation to give you one including: Verifying that your organization is legally registered and active, Verifying the address and phone number of your organization, Verifying that your organization has exclusive right to use the domain specified in the EV Certificate, Verifying that the person ordering the certificate has been authorized by the organization, Verifying that your organization is not on any government blacklists. SSL WILDCARD CERTIFICATES, SSL Wildcard Certificates are big money-savers. An SSL Wildcard Certificate allows you to secure an unlimited number of first-level sub-domains on a single domain name. For example, if you need to secure the following websites: * www.yourdomain.com * secure.yourdomain.com * product.yourdomain.com * info.yourdomain.com * download.yourdomain.com * anything.yourdomain.com and all of these websites are hosted on the multiple server box, you can purchase and install one Wildcard certificate issued to *.yourdomain.com to secure all these sites. SAN CERTIFICATES, are interesting certificates and are helpfull if you want to secure multiple domains by generating single CSR and can install the same certificate on your additional sites without generating new CSRs for all the additional domains. CODE SIGNING CERTIFICATES, A code signing certificate is a file containing a digital signature that can be used to sign executables and scripts in order to verify your identity and ensure that your code has not been tampered with since it was signed. This helps your users to determine whether your software can be trusted. Scroll to the chart below to compare cheap code signing certificates. A code signing certificate allows you to sign code using a private and public key system similar to how an SSL certificate secures a website. When you request a code signing certificate, a public/private key pair is generated. The certificate authority will then issue a code signing certificate that contains the public key. A certificate for code signing needs to be signed by a trusted certificate authority so that the operating system knows that your identity has been validated. You could still use the code signing certificate to sign and distribute malicious software but you will be held legally accountable for it. You can sign many different types of code. The most common types include Windows applications such as .exe, .cab, .dll, .ocx, and .xpi files (using an Authenticode certificate), Apple applications (using an Apple code signing certificate), Microsoft Office VBA objects and macros (using a VBA code signing certificate), .jar files (using a Java code signing certificate), .air or .airi files (using an Adobe AIR certificate), and Windows Vista drivers and other kernel-mode software (using a Vista code certificate). In reality, a code signing certificate can sign almost all types of code as long as you convert the certificate to the correct format first. Also I found the below URL which provides you good suggestion regarding purchasing best SSL certificates for securing your site, as per the Financial institution, Bank, Hosting providers, ISP, Retail Merchants etc. Please vote and provide comments or any additional suggestions regarding SSL certificates.

Read the article

Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

- by morgant

I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

Read the article

BIND DNS Master with Zerigo Slaves - BIND won't update the slave servers

- by Anthony

I've tried to resolve this myself and have looked through Google and Stack but haven't found the answer I'm looking for. Currently on a VPS server I have BIND DNS installed as a MASTER DNS Server. I use Zerigo's DNS service as SLAVE servers for public use: The Master doesn't receive queries - It's job is to simply create and modify DNS entries locally of which the SLAVE use to serve. Here is an excerpt of the BIND log, I set it to INFO event logging: 14-Apr-2012 23:00:00.234 general: info: received control channel command 'reload' 14-Apr-2012 23:00:00.234 general: info: loading configuration from 'C:\DNS\BIND\etc\named.conf' 14-Apr-2012 23:00:00.234 general: info: using default UDP/IPv4 port range: [1024, 65535] 14-Apr-2012 23:00:00.234 general: info: using default UDP/IPv6 port range: [1024, 65535] 14-Apr-2012 23:00:00.250 general: info: reloading configuration succeeded 14-Apr-2012 23:00:00.250 general: info: reloading zones succeeded 14-Apr-2012 23:16:22.750 xfer-out: info: client 174.36.24.251#47135: transfer of 'ajmakeup.com/IN': AXFR started 14-Apr-2012 23:16:22.750 xfer-out: info: client 174.36.24.251#47135: transfer of 'ajmakeup.com/IN': AXFR ended 14-Apr-2012 23:16:23.015 xfer-out: info: client 68.71.141.22#36212: transfer of 'ajmakeup.com/IN': AXFR started 14-Apr-2012 23:16:23.031 xfer-out: info: client 68.71.141.22#36212: transfer of 'ajmakeup.com/IN': AXFR ended As you can see there is no problem with Zerigo's DNS servers requesting new DNS data, when I force a reload that is; I don't believe, as per the way they are set as SLAVE, that they poll for changes. However the problem is the other way; the MASTER is not updating the SLAVE servers when reload is run (on the MASTER); it is a batch on a 15 minute timer. Below is my NAMED.CONF: key "rndc-key" { algorithm hmac-md5; secret "REMOVED FOR SECURITY"; }; acl "trusted" { 174.36.24.251/32; 68.71.141.22/32; localhost; }; options { version "not currently available"; directory "C:\DNS\BIND\etc"; allow-query { trusted; }; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; logging{ channel simple_log { file "C:\DNS\BIND\logging\bind.log" versions 3 size 5m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ simple_log; }; }; zone "ajmakeup.com" in { type master; file "c:\dns\BIND\zones\db.ajmakeup.com.txt"; allow-transfer { 174.36.24.251; 68.71.141.22; }; allow-update { none; }; }; Does my problem have something to do with 'allow-query' under options? You will notice that 'allow-transfer' is set explicitly on each DNS zone. In case you need it here is my RNDC.CONF: key "rndc-key" { algorithm hmac-md5; secret "REMOVED FOR SECURITY"; }; options { default-key "rndc-key"; default-server 127.0.0.1; default-port 953; }; server localhost { key "rndc-key"; }; Note: I am using WebsitePanel as my hosting panel and is such why it creates the zone enteries the way it does. Although I know I can change this behaviour, I do not wish to do so nor do I believe is the root of the problem. Thanks for your help.

Read the article

Gitorious errors

- by Switz

I installed Gitorious on my (shared) hosting. I was getting errors, but I seemed to have fixed most of them. It is working. When I commit/push, I get a lot of remote: errors spewed out although it does push the files properly from what I can tell. Here are the errors I'm getting (I swapped out the domain to git.domain.com): $ git push origin master Counting objects: 5, done. Delta compression using up to 2 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (3/3), 283 bytes, done. Total 3 (delta 2), reused 0 (delta 0) remote: /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `const_defined?': wrong constant name Admin/usersHelper (NameError) remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/core_ext/string/inflections.rb:162:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:137:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:120:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/app/controllers/searches_controller.rb:22 remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:265:in `require_or_load' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:224:in `depend_on' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:136:in `require_dependency' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:414:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:197:in `process' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `send' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `run' remote: from /home/saegit/GIT.DOMAIN.COM/config/environment.rb:24 remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `load_env' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:31:in `load_processor' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:55:in `queue' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:59:in `do_publish' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging.rb:39:in `publish' remote: from ./hooks/messaging.rb:45:in `post_message' remote: from hooks/post-receive:37 remote: => Syncing Gitorious... To [email protected]:os/ptd.git 7526ccb..3316eb2 master -> master

Read the article

Problem Disabling Roaming Profiles on Grouped Users

- by user43207

I'm having some serious issues getting a group of users to stop using roaming profiles. As expected, I have roaming profiles enabled accross the domain. - But am doing GPO filtering, limiting the scope. I originally had it set to authenticated users for Roaming, but as the domain has branched out to multiple locations, I've limited the scope to only people that are near the central office. The GPO that I have linked filtered to a group I have created that include users that I don't want to have roaming profiles. This GPO is sitting at the root of the domain, with the "Forced" setting enabled, so it should override any setting below it. *On a side note, it is the ONLY GPO that I have set to "Forced" right now. I know the GPO is working, since I can see the original registy settings on a user that logged in under roaming profiles - and then that same user logging in after I made the Group Policy changes, the registry reflects a local profile. But unfortunately, even after making those settings - the user is given a roaming profile on one of the servers. A gpresult of that same user account (after the updated gpo) is listed in the code block below. You can see right at the top of that output, that it is infact dealing with a roaming profile. - And sure enough, on the server that's hosting the file share for roaming profiles, it creates a folder for the user once they log in. For testing purposes, I've deleted all copies of the user's profile, roaming and local. But the problem is still here. - So I'm aparently missing something in the group policy settings on a wider scale. Would anybody be able to point me in the direction of what I'm missing here? *gpresult /r*** Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0 Copyright (C) Microsoft Corp. 1981-2001 Created On 5/15/2010 at 8:59:00 AM RSOP data for ** on * : Logging Mode OS Configuration: Member Workstation OS Version: 6.1.7600 Site Name: N/A Roaming Profile: \\profiles$** Local Profile: C:\Users*** Connected over a slow link?: No USER SETTINGS CN=*****,OU=*****,OU=*****,OU=*****,DC=*****,DC=***** Last time Group Policy was applied: 5/15/2010 at 8:52:02 AM Group Policy was applied from: *****.*****.com Group Policy slow link threshold: 500 kbps Domain Name: USSLINDSTROM Domain Type: Windows 2000 Applied Group Policy Objects ----------------------------- ForceLocalProfilesOnly InternetExplorer_***** GlobalPasswordPolicy The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- DAgentFirewallExceptions Filtering: Denied (Security) WSAdmin_***** Filtering: Denied (Security) NetlogonFirewallExceptions Filtering: Not Applied (Empty) NetLogon_***** Filtering: Denied (Security) WSUSUpdateScheduleManualInstall Filtering: Denied (Security) WSUSUpdateScheduleDaily_0300 Filtering: Denied (Security) WSUSUpdateScheduleThu_0100 Filtering: Denied (Security) AlternateSSLFirewallExceptions Filtering: Denied (Security) SNMPFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleSun_0100 Filtering: Denied (Security) SQLServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleTue_0100 Filtering: Denied (Security) WSUSUpdateScheduleSat_0100 Filtering: Denied (Security) DisableUAC Filtering: Denied (Security) ICMPFirewallExceptions Filtering: Denied (Security) AdminShareFirewallExceptions Filtering: Denied (Security) GPRefreshInterval Filtering: Denied (Security) ServeRAIDFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleFri_0100 Filtering: Denied (Security) BlockFirewallExceptions(8400-8410) Filtering: Denied (Security) WSUSUpdateScheduleWed_0100 Filtering: Denied (Security) Local Group Policy Filtering: Not Applied (Empty) WSUS_***** Filtering: Denied (Security) LogonAsService_Idaho Filtering: Denied (Security) ReportServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleMon_0100 Filtering: Denied (Security) TFSFirewallExceptions Filtering: Denied (Security) Default Domain Policy Filtering: Not Applied (Empty) DenyServerSideRoamingProfiles Filtering: Denied (Security) ShareConnectionsRemainAlive Filtering: Denied (Security) The user is a part of the following security groups --------------------------------------------------- Domain Users Everyone BUILTIN\Users BUILTIN\Administrators NT AUTHORITY\INTERACTIVE CONSOLE LOGON NT AUTHORITY\Authenticated Users This Organization LOCAL *****Users VPNAccess_***** NetAdmin_***** SiteAdmin_***** WSAdmin_***** VPNAccess_***** LocalProfileOnly_***** NetworkAdmin_***** LocalProfileOnly_***** VPNAccess_***** NetAdmin_***** Domain Admins WSAdmin_***** WSAdmin_***** ***** ***** Schema Admins ***** Enterprise Admins Denied RODC Password Replication Group High Mandatory Level

Read the article

httpd.conf configuration - for internal/external access

- by tom smith

hey. after a lot of trail/error/research, i've decided to post here in the hopes that i can get clarification on what i've screwed up... i've got a situation where i have multiple servers behind a router/firewall. i want to be able to access the sites i have from an internal and external url/address, and get the same site. i have to use portforwarding on the router, so i need to be able to use proxyreverse to redirect the user to the approriate server, running the apache/web app... my setup the external urls joomla.gotdns.com forge.gotdns.com both of these point to my router's external ip address (67.168.2.2) (not really) the router forwards port 80 to my server lserver6 192.168.1.56 lserver6 - 192.168.1.56 lserver9 - 192.168.1.59 lserver6 - joomla app lserver9 - forge app i want to be able to have the httpd process (httpd.conf) configured on lserver6 to be able to allow external users accessing the system (foo.gotdns.com) be able to access the joomla app on lserver6 and the same for the forge app running on lserver9 at the same time, i would also like to be able to access the apps from the internal servers, so i'd need to be able to somehow configure the vhost setup/proxyreverse setup to handle the internal access... i've tried setting up multiple vhosts with no luck.. i've looked at the different examples online.. so there must be something subtle that i'm missing... the section of my httpd.conf file that deals with the vhost is below... if there's something else that's needed, let me know and i can post it as well.. thanks -tom ##joomla - file /etc/httpd/conf.d/joomla.conf Alias /joomla /var/www/html/joomla <Directory /var/www/html/joomla> </Directory> # Use name-based virtual hosting. #NameVirtualHost *:80 # NOTE: NameVirtualHost cannot be used without a port specifier # (e.g. :80) if mod_ssl is being used, due to the nature of the # SSL protocol. # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common #</VirtualHost> NameVirtualHost 192.168.1.56:80 <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] #DocumentRoot /var/www/html #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName fforge.gotdns.com:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off ProxyPass / http://192.168.1.81:80/ ProxyPassReverse / http://192.168.1.81:80/ </VirtualHost> <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] DocumentRoot /var/www/html/joomla #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName 192.168.1.56:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off </VirtualHost>

Read the article

Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

- by morgant

I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

Read the article

Mysql performance problem & Failed DIMM

- by murdoch

Hi I have a dedicated mysql database server which has been having some performance problems recently, under normal load the server will be running fine, then suddenly out of the blue the performance will fall off a cliff. The server isn't using the swap file and there is 12GB of RAM in the server, more than enough for its needs. After contacting my hosting comapnies support they have discovered that there is a failed 2GB DIMM in the server and have scheduled to replace it tomorow morning. My question is could a failed DIMM result in the performance problems I am seeing or is this just coincidence? My worry is that they will replace the ram tomorrow but the problems will persist and I will still be lost of explanations so I am just trying to think ahead. The reason I ask is that there is plenty of RAM in the server, more than required and simply missing 2GB should be a problem, so if this failed DIMM is causing these performance problems then the OS must be trying to access the failed DIMM and slowing down as a result. Does that sound like a credible explanation? This is what DELLs omreport program says about the RAM, notice one dimm is "Critical" Memory Information Health : Critical Memory Operating Mode Fail Over State : Inactive Memory Operating Mode Configuration : Optimizer Attributes of Memory Array(s) Attributes : Location Memory Array 1 : System Board or Motherboard Attributes : Use Memory Array 1 : System Memory Attributes : Installed Capacity Memory Array 1 : 12288 MB Attributes : Maximum Capacity Memory Array 1 : 196608 MB Attributes : Slots Available Memory Array 1 : 18 Attributes : Slots Used Memory Array 1 : 6 Attributes : ECC Type Memory Array 1 : Multibit ECC Total of Memory Array(s) Attributes : Total Installed Capacity Value : 12288 MB Attributes : Total Installed Capacity Available to the OS Value : 12004 MB Attributes : Total Maximum Capacity Value : 196608 MB Details of Memory Array 1 Index : 0 Status : Ok Connector Name : DIMM_A1 Type : DDR3-Registered Size : 2048 MB Index : 1 Status : Ok Connector Name : DIMM_A2 Type : DDR3-Registered Size : 2048 MB Index : 2 Status : Ok Connector Name : DIMM_A3 Type : DDR3-Registered Size : 2048 MB Index : 3 Status : Critical Connector Name : DIMM_B1 Type : DDR3-Registered Size : 2048 MB Index : 4 Status : Ok Connector Name : DIMM_B2 Type : DDR3-Registered Size : 2048 MB Index : 5 Status : Ok Connector Name : DIMM_B3 Type : DDR3-Registered Size : 2048 MB the command free -m shows this, the server seems to be using more than 10GB of ram which would suggest it is trying to use the DIMM total used free shared buffers cached Mem: 12004 10766 1238 0 384 4809 -/+ buffers/cache: 5572 6432 Swap: 2047 0 2047 iostat output while problem is occuring avg-cpu: %user %nice %system %iowait %steal %idle 52.82 0.00 11.01 0.00 0.00 36.17 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 47.00 0.00 576.00 0 576 sda1 0.00 0.00 0.00 0 0 sda2 1.00 0.00 32.00 0 32 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 46.00 0.00 544.00 0 544 avg-cpu: %user %nice %system %iowait %steal %idle 53.12 0.00 7.81 0.00 0.00 39.06 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 592.00 0 592 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 592.00 0 592 avg-cpu: %user %nice %system %iowait %steal %idle 56.09 0.00 7.43 0.37 0.00 36.10 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 232.00 0.00 64520.00 0 64520 sda1 0.00 0.00 0.00 0 0 sda2 159.00 0.00 63728.00 0 63728 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 73.00 0.00 792.00 0 792 avg-cpu: %user %nice %system %iowait %steal %idle 52.18 0.00 9.24 0.06 0.00 38.51 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 600.00 0 600 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 600.00 0 600 avg-cpu: %user %nice %system %iowait %steal %idle 54.82 0.00 8.64 0.00 0.00 36.55 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 100.00 0.00 2168.00 0 2168 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 100.00 0.00 2168.00 0 2168 avg-cpu: %user %nice %system %iowait %steal %idle 54.78 0.00 6.75 0.00 0.00 38.48 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 84.00 0.00 896.00 0 896 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 84.00 0.00 896.00 0 896 avg-cpu: %user %nice %system %iowait %steal %idle 54.34 0.00 7.31 0.00 0.00 38.35 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 81.00 0.00 840.00 0 840 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 81.00 0.00 840.00 0 840 avg-cpu: %user %nice %system %iowait %steal %idle 55.18 0.00 5.81 0.44 0.00 38.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 317.00 0.00 105632.00 0 105632 sda1 0.00 0.00 0.00 0 0 sda2 224.00 0.00 104672.00 0 104672 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 93.00 0.00 960.00 0 960 avg-cpu: %user %nice %system %iowait %steal %idle 55.38 0.00 7.63 0.00 0.00 36.98 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 74.00 0.00 800.00 0 800 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 74.00 0.00 800.00 0 800 avg-cpu: %user %nice %system %iowait %steal %idle 56.43 0.00 7.80 0.00 0.00 35.77 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 72.00 0.00 784.00 0 784 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 72.00 0.00 784.00 0 784 avg-cpu: %user %nice %system %iowait %steal %idle 54.87 0.00 6.49 0.00 0.00 38.64 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 80.20 0.00 855.45 0 864 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 80.20 0.00 855.45 0 864 avg-cpu: %user %nice %system %iowait %steal %idle 57.22 0.00 5.69 0.00 0.00 37.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 33.00 0.00 432.00 0 432 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 33.00 0.00 432.00 0 432 avg-cpu: %user %nice %system %iowait %steal %idle 56.03 0.00 7.93 0.00 0.00 36.04 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 41.00 0.00 560.00 0 560 sda1 0.00 0.00 0.00 0 0 sda2 2.00 0.00 88.00 0 88 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 39.00 0.00 472.00 0 472 avg-cpu: %user %nice %system %iowait %steal %idle 55.78 0.00 5.13 0.00 0.00 39.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 29.00 0.00 392.00 0 392 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 29.00 0.00 392.00 0 392 avg-cpu: %user %nice %system %iowait %steal %idle 53.68 0.00 8.30 0.06 0.00 37.95 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 78.00 0.00 4280.00 0 4280 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 78.00 0.00 4280.00 0 4280

Read the article

CentOS 5.4 NFS v4 client file permissions differ from original files & NFS Share file contents

- by p4guru

Having a strange problem with NFS share and file permissions on the 1 out of the 2 NFS clients, web1 has file permissions issues but web2 is fine. web1 and web2 are load balanced web servers. So questions are: how do I ensure NFS share file contents retain the same permissions for user/group as the original files on web1 server like they do on web2 server ? how do I reverse what I did on web1, i tried unmount command and said command not found ? Information: I'm using 3 dedicated server setup. All 3 servers CentOS 5.4 64bit based. servers are as follows: web1 - nfs client with file permissions issues web2 - nfs client file permissions are OKAY db1 - nfs share at /nfsroot web2 nfs client was setup by my web host, while web1 was setup by me. I did the following commands on web1 and it worked with updating db1 nfsroot share at /nfsroot/site_css with latest files on web1 but the file permissions don't stick even if i use tar with -p command to perserve file permissions ? cd /home/username/public_html/forums/script/ tar -zcp site_css/ > site_css.tar.gz mount -t nfs4 nfsshareipaddress:/site_css /home/username/public_html/forums/scripts/site_css/ -o rw,soft cd /home/username/public_html/forums/script/ tar -zxf site_css.tar.gz But checking on web1 file permissions no longer username user/group but owned by nobody ? but web2 file permissions correct ? This is only a problem for web1 while web2 is correct ? Looks like numeric ids aren't the same ? Not sure how to correct this ? web1 with incorrect user/group of nobody ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 nobody nobody 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Feb 22 02:43 ../ -rw-r--r-- 1 nobody nobody 1 Nov 30 2006 index.html -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-cc2f96c9-00011.css web1 numeric ids ls -n /home/username/public_html/forums/scripts/site_css total 48 drwxrwxrwx 2 99 99 4096 Feb 22 02:37 ./ drwxr-xr-x 3 503 500 4096 Feb 22 02:43 ../ -rw-r--r-- 1 99 99 1 Nov 30 2006 index.html -rw-r--r-- 1 99 99 5876 Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 99 99 5877 Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 99 99 5877 Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 99 99 5876 Feb 18 05:37 style-cc2f96c9-00011.css web2 correct username user/group permissions ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Dec 2 14:51 ../ -rw-r--r-- 1 username username 1 Nov 30 2006 index.html -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-cc2f96c9-00011.css web2 numeric ids ls -n /home/username/public_html/forums/scripts/site_css total 48 drwxrwxrwx 2 503 500 4096 Feb 22 02:37 ./ drwxr-xr-x 3 503 500 4096 Dec 2 14:51 ../ -rw-r--r-- 1 503 500 1 Nov 30 2006 index.html -rw-r--r-- 1 503 500 5876 Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 503 500 5877 Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 503 500 5877 Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 503 500 5876 Feb 18 05:37 style-cc2f96c9-00011.css I checked db1 /nfsroot/site_css and user/group ownership was incorrect for newer files dated feb22 owned by root and not username ? on db1 originally incorrect root assigned user/group for new feb22 dated files ls -alh /nfsroot/site_css total 44K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 . drwxr-xr-x 17 root root 4.0K Feb 17 12:06 .. -rw-r--r-- 1 root root 1 Nov 30 2006 index.html -rw-r--r-- 1 root root 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 root root 5.8K Feb 22 02:37 style-95001864-00002.css -rw------- 1 username nfs 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw------- 1 username nfs 5.8K Feb 18 05:37 style-cc2f96c9-00011.css Then I chmod them all on db1 and chown to set to right ownership on db1 so it looks like below on db1 once corrected the newer feb22 dated files ls -alh /nfsroot/site_css total 44K drwxrwxrwx 2 root root 4.0K Feb 22 02:37 . drwxr-xr-x 17 root root 4.0K Feb 17 12:06 .. -rw-r--r-- 1 username username 1 Nov 30 2006 index.html -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 username username 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 username username 5.8K Feb 18 05:37 style-cc2f96c9-00011.css but still web1 shows owned by nobody ? while web2 shows correct permissions ? web1 still with incorrect user/group of nobody not matching what web2 and db1 are set to ? ls -alh /home/username/public_html/forums/scripts/site_css total 48K drwxrwxrwx 2 nobody nobody 4.0K Feb 22 02:37 ./ drwxr-xr-x 3 username username 4.0K Feb 22 02:43 ../ -rw-r--r-- 1 nobody nobody 1 Nov 30 2006 index.html -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-057c3df0-00011.css -rw-r--r-- 1 nobody nobody 5.8K Feb 22 02:37 style-95001864-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-b1879ba7-00002.css -rw-r--r-- 1 nobody nobody 5.8K Feb 18 05:37 style-cc2f96c9-00011.css Just so confusing so any help is very very much appreciated! thanks

Read the article

KVM/Libvirt bridged/routed networking not working on newer guest kernels

- by SharkWipf

I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

Read the article

AMD 24 core server memory bandwidth

- by ntherning

I need some help to determine whether the memory bandwidth I'm seeing under Linux on my server is normal or not. Here's the server spec: HP ProLiant DL165 G7 2x AMD Opteron 6164 HE 12-Core 40 GB RAM (10 x 4GB DDR1333) Debian 6.0 Using mbw on this server I get the following numbers: foo1:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.58047 MiB: 1024.00000 Copy: 1764.082 MiB/s 1 Method: MEMCPY Elapsed: 0.58012 MiB: 1024.00000 Copy: 1765.152 MiB/s 2 Method: MEMCPY Elapsed: 0.58010 MiB: 1024.00000 Copy: 1765.201 MiB/s AVG Method: MEMCPY Elapsed: 0.58023 MiB: 1024.00000 Copy: 1764.811 MiB/s 0 Method: DUMB Elapsed: 0.36174 MiB: 1024.00000 Copy: 2830.778 MiB/s 1 Method: DUMB Elapsed: 0.35869 MiB: 1024.00000 Copy: 2854.817 MiB/s 2 Method: DUMB Elapsed: 0.35848 MiB: 1024.00000 Copy: 2856.481 MiB/s AVG Method: DUMB Elapsed: 0.35964 MiB: 1024.00000 Copy: 2847.310 MiB/s 0 Method: MCBLOCK Elapsed: 0.23546 MiB: 1024.00000 Copy: 4348.860 MiB/s 1 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.230 MiB/s 2 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.359 MiB/s AVG Method: MCBLOCK Elapsed: 0.23545 MiB: 1024.00000 Copy: 4349.149 MiB/s On one of my other servers (based on Intel Xeon E3-1270): foo2:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.18960 MiB: 1024.00000 Copy: 5400.901 MiB/s 1 Method: MEMCPY Elapsed: 0.18922 MiB: 1024.00000 Copy: 5411.690 MiB/s 2 Method: MEMCPY Elapsed: 0.18944 MiB: 1024.00000 Copy: 5405.491 MiB/s AVG Method: MEMCPY Elapsed: 0.18942 MiB: 1024.00000 Copy: 5406.024 MiB/s 0 Method: DUMB Elapsed: 0.14838 MiB: 1024.00000 Copy: 6901.200 MiB/s 1 Method: DUMB Elapsed: 0.14818 MiB: 1024.00000 Copy: 6910.561 MiB/s 2 Method: DUMB Elapsed: 0.14820 MiB: 1024.00000 Copy: 6909.628 MiB/s AVG Method: DUMB Elapsed: 0.14825 MiB: 1024.00000 Copy: 6907.127 MiB/s 0 Method: MCBLOCK Elapsed: 0.04362 MiB: 1024.00000 Copy: 23477.623 MiB/s 1 Method: MCBLOCK Elapsed: 0.04262 MiB: 1024.00000 Copy: 24025.151 MiB/s 2 Method: MCBLOCK Elapsed: 0.04258 MiB: 1024.00000 Copy: 24048.849 MiB/s AVG Method: MCBLOCK Elapsed: 0.04294 MiB: 1024.00000 Copy: 23847.599 MiB/s For reference here's what I get on my Intel based laptop: laptop:~$ mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.40566 MiB: 1024.00000 Copy: 2524.269 MiB/s 1 Method: MEMCPY Elapsed: 0.38458 MiB: 1024.00000 Copy: 2662.638 MiB/s 2 Method: MEMCPY Elapsed: 0.38876 MiB: 1024.00000 Copy: 2634.043 MiB/s AVG Method: MEMCPY Elapsed: 0.39300 MiB: 1024.00000 Copy: 2605.600 MiB/s 0 Method: DUMB Elapsed: 0.30707 MiB: 1024.00000 Copy: 3334.745 MiB/s 1 Method: DUMB Elapsed: 0.30425 MiB: 1024.00000 Copy: 3365.653 MiB/s 2 Method: DUMB Elapsed: 0.30342 MiB: 1024.00000 Copy: 3374.849 MiB/s AVG Method: DUMB Elapsed: 0.30491 MiB: 1024.00000 Copy: 3358.328 MiB/s 0 Method: MCBLOCK Elapsed: 0.07875 MiB: 1024.00000 Copy: 13003.670 MiB/s 1 Method: MCBLOCK Elapsed: 0.08374 MiB: 1024.00000 Copy: 12228.034 MiB/s 2 Method: MCBLOCK Elapsed: 0.07635 MiB: 1024.00000 Copy: 13411.216 MiB/s AVG Method: MCBLOCK Elapsed: 0.07961 MiB: 1024.00000 Copy: 12862.006 MiB/s So according to mbw my laptop is 3 times faster than the server!!! Please help me explain this. I've also tried to mount a ram disk and use dd to benchmark it and I get similar differences so I don't think mbw is to blame. I've checked the BIOS settings and the memory seem to be running at full speed. According to the hosting company the modules are all OK. Could this have something to do with NUMA? It seems like Node Interleaving is disabled on this server. Will enabling it (thus turning off NUMA) make a difference? foo1:~# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 node 0 size: 8190 MB node 0 free: 7898 MB node 1 cpus: 6 7 8 9 10 11 node 1 size: 12288 MB node 1 free: 12073 MB node 2 cpus: 18 19 20 21 22 23 node 2 size: 12288 MB node 2 free: 12034 MB node 3 cpus: 12 13 14 15 16 17 node 3 size: 8192 MB node 3 free: 8032 MB node distances: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 20 2: 20 20 10 20 3: 20 20 20 10

Search Results

Search found 6826 results on 274 pages for 'dedicated hosting'.

Page 259/274 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266 | Next Page >

- by user9135656

- by Janice J. Heiss

- by Tarun Arora

- by Richard Bingham

- by Dave Campbell

- by Dave Miner

- by James Michael Hare

- by Timothy Klenke

- by kagaku

- by rudrap

- by DSoul

- by sxkumar

- by Maik

- by p4guru

- by Mit Naik

- by morgant

- by Anthony

- by Switz

- by user43207

- by tom smith

- by morgant

- by murdoch

- by p4guru

- by SharkWipf

- by ntherning

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266 | Next Page >