Search Results

Search found 955 results on 39 pages for 'gpu accelration'.

Page 26/39 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• HDMI Audio drops out when display enters powersave

  - by Jared Tritsch

  I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

  Read the article

• Serious voltage and temperature problems

  - by James Willson

  My computer has been acting up when I play games so I wanted to look into why. Issue 1: GPU Temp According to afterburner and speedfan my 8800GTX idles at 90 degrees and then when playing games shoots up to over 110C which is when my graphics basically starts to give rendering issues. Issue 2: CPU Temp Speedfan is saying my CPU temp is 83C idle but when I look at core temp it says core0 is at 35C and core1 is at 33C. Issue 3: Voltages This is what speedfan is saying for my voltages: Vcore1: 1.01V Vcore2: 1.90V +3.3V: 3.31V +5V: 4.95V +12V: 0.51V -12V: -16.80V -5V: -8.43V +5V 5.13V Vbat: 3.25V Vcore: 3.00V +3.3V: 3.20V These voltages, for lack of a better word, look f*cked. With all this happening, the computer runs ok under normal use. Is the software giving out incorrect readouts or instead should I immediately move the computer into another room before it explodes? P.s I would like to add this is a stock system. EVGA 8800GTX, E6850 CPU, 800W PSU

  Read the article

• Opera12 browser support for WebGL

  - by Sneha

  I have enabled - enable webGL by entering Enable WebGL in opera:config by setting the value to 1, and Enable Hardware Acceleration similarly, then restart the browser - Opera 12 on Windows & tried to open - http://aleksandarrodic.com/p/jellyfish/. This gives me an alert saying - Your browser failed to initialize WebGL. Please guide me on - What's going wrong? opera:gpu says : Hardware acceleration Disabled Direct3D 10 Backend not supported Could not load library OpenGL Backend not supported Could not load library But,same thing (http://aleksandarrodic.com/p/jellyfish/) works fine on Chrome! Thanks Sneha

  Read the article

• Any Suggestions on How to Soup Up/ Mod a MacBook Pro 13"?

  - by 5arx

  So I've got a mid-2009 MacBook Pro 13". Integrated GPU so not a games machine but fast enough for doing .Net development in VMs. I love the little thing and wanted to give it a Christmas present so thought I'd mod it up a bit and give it a boost. I'm probably going to go for a 500GB Seagate Momentus XT hybrid drive rather than full-on SSD (I need 500GB space) but was wondering if there are any other mods/tweaks people could suggest? I saw something online about swapping a HDD for the DVD drive and wondered if anyone had tried this or similarly drastic mods to the smallest of the MBPs. Cheers.

  Read the article

• Second monitor not detected

  - by Gabriel

  Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

  Read the article

• ATI AMD Radeon 6670M 2GB Dual External monitors

  - by kellax

  I have HP Pavilion dv7 BeatsAudo model: dv7-6b with following specifications: CPU: Intel i7-2670QM ( Quad Core ) 8 CPU's @ 2.2Ghz RAM: 8GB @ 1066 GPU: ATI Radeon HD 6770M 1GB Notebook has two slots: HDMI and VGA On my VGA i have an external monitor 24" Samsung, any idea if my notebook could support a second external monitor as well. I do a lot of development work, i havent got a second monitor to test it yes but i know there can be problems. I would like to have a monitor connected on my VGA and on my HDMI so two external monitors and notebooks monitor. Would this be viable ?

  Read the article

• Notebook with NVIDIA Optimus not switching video card in games

  - by user140739

  I have a Samsung RC720 notebook with Intel Integrated Graphics and NVIDIA GeForce GT 520M. As you can see it has two video adapters and Optimus is supposed to switch between them. But when I choose dedicated GPU in NVIDIA Control Panel and try to run, for example, GTA IV, it uses integrated graphics and I get very poor performance. I have already installed last NVIDIA and notebook drivers, chose high-performance in NVIDIA Control Panel, tried to execute with "Run with graphics processor..." context option and so on. Thanks for help.

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

• Using PCIe and onboard together

  - by dave

  I'm currently using my PCI Express card to run 2 monitors and my onboard to run another. It works fine despite people saying it won't. I use a gadget to monitor my PCI card but would also like to monitor my onboard GPU as well. I play a game called Eve Online and when I'm running my accts I can only get 20 fps. Before, when I was using just my PCI card, I was getting 60+. To solve this, I set the display options to interval immediate, it was set to one before. My computer handles it no problem at all, but I was always told this was immpossible. I was hoping someone could explain how and why this is working. Thanks! My setup is: i7 2600k 16 GB RAM XFX HD6970 2GB

  Read the article

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• How do I pick a motherboard?

  - by EpsilonVector

  When building your own computer one part was always a mystery to me: the motherboard. Picking a CPU/GPU/memory is easy- you just figure out where the various chips are in the low end to high end scale, do a little market research on what current games demand, and pick the parts from their respective continuums of low-to-high-end models. A mother board is more complicated though. Its features are not as obvious as "this motherboard is faster than that motherboard". Now you need to deal with part compatibilities, bus speeds, maybe power management stuff, etc. I'm interested in a short guide for selecting a motherboard, especially- what pitfalls to avoid (for example, can bus speed become a bottleneck?). To clarify: I'm not looking for motherboard recommendations. I'm looking for guidance regarding how to evaluate the fitness of a motherboard given the rest of the computer parts.

  Read the article

• Getting More Performance out of a MacBook Pro

  - by 5arx

  So I've got a mid-2009 MacBook Pro 13". Integrated GPU so not a games machine but fast enough for doing .Net development in VMs. I love the little thing and wanted to give it a Christmas present so thought I'd mod it up a bit and give it a boost. I'm thinking of swapping out the stock 5400rpm HD with a faster hybrid drive (has 4GB RAM and spins at 7200rpm) but was wondering if any of you had tried or knew of anything else I could change/upgrade/mod to squeeze more out of my laptop. Before you answer though, please be aware that I'm not sure I can run to putting in the 8GB of RAM Apple have suggested :-( Thanks in advance.

  Read the article

• Computer only booting after POWER ON/OFF 10 times or more?

  - by Jan Gressmann

  Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

  Read the article

• Custom PC won't boot Windows 7 dvd but does with windows vista

  - by M_rk

  I ordered a custom build PC. (It was assembled by the store). This is the setup Motherboard: Asrock A75 PRO4-M DVD drive: LG GH24NS90 SSD: Samsung 830 series 128GB DDR3 SDRAM: 2× Corsair XMS3 CMX4GX3M1A1600C9 (2× 4GB) APU (CPU+GPU): AMD A8-3850 Boxed I got a installation DVD for Windows 7 Professional x64 English (including SP1), but it doesn't work. I got a new one from the store and it doesn't work either. However they work on a other PC. So the DVDs aren't bad. I tried an old installation DVD for Windows Vista. Both 32 bit and 64 bit work. So the boot order and such are right and working on the new PC. Is there something I'm missing here? Any ideas on how to make it work?

  Read the article

• Tests for hard drive health

  - by Samik R

  I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• Is there a way to stream wirelessly from a laptop to a TV?

  - by Robsta

  I heard of such a thing like a box or a media player such thing that can connect wirelessly to stream movies from my laptop? Is there such a thing that can do it? How is the latency on it? I have fast internet so that's not an issue, or is there such a box that connects with Bluetooth for better connection? I need these box to also be able to browse the internet because I'd like to stream movies from YouTube. I have heard of a thing called boxee, but is that what I'm looking for? I have windows 7 as my os, with an HDMI out and a GPU with a 555m. My laptop is powerful enough and my internet is 25mbps with a cap of 150GB. All i would really like to know is what this device is called? A media box?

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• Can a motherboard be faulty even if it's getting power and so are components hooked up to it?

  - by Davy8

  Sort of a followup to this question. The mobo's getting power, the lights are on. The GPU fan is spinning (it doesn't use auxiliary power, it's only connected to the mobo). I'm not getting any video signal, and it's not the video card (nor monitor) that's faulty, so I'm suspecting mobo or CPU (possibly RAM?) and I'm trying to pinpoint which part is at fault. Is the motherboard a candidate for being broken or is it not very likely if it's getting power and powering other components? The CPU fan is getting power as well.

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• How to Track CPU and Memory Usage Per Process

  - by Mjsk

  I have seen this question asked on here before but was unable to follow the answer which was given. I would like to monitor a processes CPU, Memory, and possibly GPU usage over a given time. The data would be useful if presented in a graph. It would be nice if I could do this using Performance Monitor, but I am open to alternative solutions as well. I have tried using Performance Monitor and my problem is that I'm not sure which performance counters to use since there are so many. I've been looking at a Process, Processor, Memory, etc. but I'm not sure which counters within those categories will be of interest to me. My OS is Windows 7.

  Read the article

• Why does changing LCD screen resolution (Windows 7) take several seconds?

  - by Jakub P.

  Why does it take so long for a computer monitor to change resolution? Why does it take 2-3 seconds rather than, say, 50 ms? E.g. my current Windows 7 with strong GPU and 24 inch monitor takes 2-3 seconds. Why so long? I know some might say "it's JUST 2 seconds", but come on... Games produce hundreds of FPS, and monitors work at 60 Hz, so what is it that takes so much time? I remember this was the same in just about any machine I ever worked with.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >