root permission - Page 260

Replacing innertext of XML node using PHP DOMDocument

- by Rohan Kumar

I want to replace innertext of a XML node my XML file named test.xml is <?xml version="1.0" encoding="utf-8"?> <ads> <loop>no</loop> <item> <description>Description 1</description> </item> <item> <description>Text in item2</description> </item> <item> <description>Let play with this XML</description> </item> </ads> I want to change the value of loop and description tag both, and it should be saved in test.xml like: <?xml version="1.0" encoding="utf-8"?> <ads> <loop>yes</loop> <item> <description>Description Changing Here</description> </item> <item> <description>Changing text in item2</description> </item> <item> <description>We will play later</description> </item> </ads> I tried code in PHP: <? $file = "test.xml"; $fp = fopen($file, "rb") or die("cannot open file"); $str = fread($fp, filesize($file)); $dom=new DOMDocument(); $dom->formatOutput = true; $dom->preserveWhiteSpace = false; $dom->loadXML($str) or die("Error"); //$dom->load("items.xml"); $root=$dom->documentElement; // This can differ (I am not sure, it can be only documentElement or documentElement->firstChild or only firstChild) $loop=$root->getElementsByTagName('loop')->item(0);//->textContent; //echo $loop; if(trim($loop->textContent)=='no') { echo 'ok'; $root->getElementsByTagName('loop')->item(0)->nodeValue ='yes'; } echo "<xmp>NEW:\n". $dom->saveXML() ."</xmp>"; ?> I tried only for loop tag.I don't know how to replace nodevalue in description tag. When I run this page it shows output like: ok NEW: <?xml version="1.0" encoding="utf-8"?> <ads> <loop>yes</loop> <item> <description>Description 1</description> </item> <item> <description>Changing text in item2</description> </item> <item> <description>Let play with this XML</description> </item> </ads> It gives the value yes in browser but don't save it in test.xml any reason?

Read the article

CodePlex Daily Summary for Friday, February 19, 2010

CodePlex Daily Summary for Friday, February 19, 2010New ProjectsApplication Management Library: Application Management makes your application life easier. It will automatic do memory management, handle and log unhandled exceptions, profiling y...Audio Service - Play Wave Files From Windows Service: This is a windows service that Check a registry key, when the key is updated with a new wave file path the service plays the wave file.Aviamodels: 3d drawing AviamodelsControl of payment proofs program for Greek citizens: This is a program that is used for Greek citizens who want to keep track of their payment proofs.Cover Creator: Cover Creator gives you the possibility to create and print CD covers. Content of CD is taken from http://www.freedb.org/ or can be added/modyfied ...DevBoard: DevBoard is a webbased scrum tool that helps developers/team get a clear overview of the project progress. It's developed in C# and silverlight.Flex AdventureWorks: The is mostly a skunk-works application to help me get acclimated to CodePlex. The long term goal is to integrate a Flex UI with the AdventureWor...GRE Wordlist: An intuitive and customizable word list for GRE aspirants. Developed in Java using a word list similar to Barron's.Indexer: A desktop file Index and Search tool which allows you to choose a list of folders to index, and then search on later. It is based on Lucene.net an...Project Management Office (PMO) for SharePoint: Sample web part for the Code Mastery event in Boston, February 11, 2010.Restart SQL Audit Policy and Job: Resolve SQL 2008 Audit Network Connectivity Issue.Rounded Corners / DIV Container: The RoundedDiv round corners container is a skin-able, CSS compliant UI control. Select which corners should be rounded, collapse and expand the c...Silverlight Google Search Application: The Silverlight Google Search Application uses Google Search API and behaves like Internet Search Application with option to preview desired page i...Weather Forecast Control: MyWeather forecast control pulls up to date weather forecast information from The Weather Channel for your website.New ReleasesApplication Management Library: ApplicationManagement v1.0: First ReleaseAudio Service - Play Wave Files From Windows Service: Audio Service v1.0: This is a working version of the Audio Service. Please use as you need to.AutoMapper: 1.0.1 for Silverlight 3.0 Alpha: AutoMapper for Silverlight 3.0. Features not supported: IDataReader mapping IListSource mapping All other features are supported.Buzz Dot Net: Buzz Dot Net v.1.10219: Buzz Dot Net Library (Parser & Objects) + WPF Example (using MVVM & Threading)Canvas VSDOC Intellisense: V 1.0.0.0a: This release contains two JavaScript files: canvas-utils.js (can be referenced in both runtime and development environment) canvas-vsdoc.js (must ...Control of payment proofs program for Greek citizens: Payment Proofs: source codeCourier: Beta 2: Added Rx Framework support and re-factored how message registration and un-registration works Blog post explaining the updates and re-factoring c...Cover Creator: Initial release: This is initial stable release. For now only in Polish language.Employee Scheduler: Employee Scheduler 2.2: Small Bug found. Small total hour calculation bug. See http://employeescheduler.codeplex.com/WorkItem/View.aspx?WorkItemId=6059 Extract the files...EnhSim: Release v1.9.7.1: Release v1.9.7.1Implemented Dislodged Foreign Object trinket Whispering Fanged Skull now also procs off Flame shock dots You can toggle bloodlust o...Extend SmallBasic: Teaching Extensions v.007: added SimpleSquareTest added Tortoise.Approve() for virtual proctor how to use virtual proctor: change the path in the proctor.txt file (located i...FolderSize: FolderSize.Win32.1.0.1.0: FolderSize.Win32.1.0.1.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GLB Virtual Player Builder: v0.4.0 Beta: Allows for user to import and use archetypes for building players. The archetypes are contained in the file "archetypes.xml". This file is editab...Google Map WebPart from SharePoint List: GMap Stable Release: GMap Stable ReleaseHenge3D Physics Library for XNA: Henge3D Source (2010-02 R2): Fixed a build error related to an assembly attribute in XBOX 360 builds. Tweaked the controls in the sample when targeting the 360. Reduced the...Indexer: Beta Release 1: Just the initial/rough cut.NukeCS: NukeCS 5.2.3 Source Code: update version to 5.2.3ODOS: ODOS STABLE 1.5.0: Thank you for your patience while we develop this version. Not that much has been added, though. Just doing some sub-conscious stuff to make life...PoshBoard: PoshBoard 3.0 Beta 1: Welcome to the first beta release of PoshBoard 3.0 ! IMPORTANT WARNING : this release is absolutly not feature complete and is error-prone. Okay, ...Restart SQL Audit Policy and Job: Restart SQL 2008 Audit Policy and Job: This folder contains three pieces of source code: Server Audit Status (Started).xml - Import this on-schedule policy into your server's Policy-Ba...SAL- Self Artificial Learning: Artificial Learning 2AQV Working Proof Of Concept: This is the Simulation proof of concept version that comes after the 1aq version. AQ stands for Anwering Questions.SharePoint 2010 Word Automation: SP 2010 Word Automation - Workflow Actions 1.1: This release includes two new custom workflow activities for SharePoint designer Convert Folder Convert Library More information about these new...SharePoint Outlook Connector: Version 1.0.1.1: Exception Logging has been improved.Sharpy: Sharpy 1.2 Alpha: This is the third Sharpy release. A change has been made to allow overriding the master page from the controller. The release contains the single ...Silverlight Google Search Application: SL Google Search App Alpha: This is just a first alpha version of the application, as it looks like when I uploaded it to CodePlex. The application works, requires Silverlight...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC: EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 RC db MSSQL2008thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.6): This release is an update for WSCF.blue V1. Below are the bug fixes made since the V1.0.5 release: The data contract type filter was not including...TS3QueryLib.Net: TS3QueryLib.Net Version 0.18.13.0: Changelog Added overloads to all methods of QueryRunenr class handling permission tasks to allow passing of permission name instead of permissionid...Umbraco CMS: Umbraco 4.1 Beta 2: This is the second beta of Umbraco 4.1. Umbraco 4.1 is more advanced than ever, yet faster, lighter and simpler to use than ever. We, on behalf of...VCC: Latest build, v2.1.30218.0: Automatic drop of latest buildZack's Fiasco - Code Generated DAL: v1.2.4: Enhancements: SQL Server CRUD Stored Procedures added option for USE <db> added option to create or not create INSERT sprocs added option to cr...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsRawrSharpyDinnerNow.netBlogEngine.NETjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitFluent Ribbon Control Suite

Read the article

Database users in the Oracle Utilities Application Framework

- by Anthony Shorten

I mentioned the product database users fleetingly in the last blog post and they deserve a better mention. This applies to all versions of the Oracle Utilities Application Framework. The Oracle Utilities Application Framework uses up to three users initially as part of the base operations of the product. The type of database supported (the framework supports Oracle, IBM DB2 and Microsoft SQL Server) dictates the number of users used and their permissions. For publishing brevity I will outline what is available for the Oracle database and, in summary, mention where it differs for the other database supported. For Oracle database customers we ship three distinct database users: Administration User (SPLADM or CISADM by default) - This is the database user that actually owns the schema. This user is not used by the product to do any DML (Data Manipulation Language) SQL other than that is necessary for maintenance of the database. This database user performs all the DCL (Data Control Language) and DDL (Data Definition Language) against the database. It is typically reserved for Database Administration use only. Product Read Write User (SPLUSER or CISUSER by default) - This is the database user used by the product itself to execute DML (Data Manipulation Language) statements against the schema owned by the Administration user. This user has the appropriate read and write permission to objects within the schema owned by the Administration user. For databases such as DB2 and SQL Server we may not create this user but use other DCL (Data Control Language) statements and facilities to simulate this user. Product Read User (SPLREAD or CISREAD by default) - This is the database that has read only permission to the schema owned by the Administration user. It is used for reporting or any part of the product or interface that requires read permissions to the database (for example, products that have ConfigLab and Archiving use this user for remote access). For databases such as DB2 and SQL Server we may not create this user but use other DCL (Data Control Language) statements and facilities to simulate this user. You may notice the words by default in the list above. The values supplied with the installer are the default and can be changed to what the site standard or implementation wants to use (as long as they conform to the standards supported by the underlying database). You can even create multiples of each within the same database and pointing to same schema. To manage the permissions for the users, there is a utility provided with the installation (oragensec (Oracle), db2gensec (DB2) or msqlgensec (SQL Server)) that generates the security definitions for the above users. That can be executed a number of times for each schema to give users appropriate permissions. For example, it is possible to define more than one read/write User to access the database. This is a common technique used by implementations to have a different user per access mode (to separate online and batch). In fact you can also allocate additional security (such as resource profiles in Oracle) to limit the impact of specific users at the database. To facilitate users and permissions, in Oracle for example, we create a CISREAD role (read only role) and a CISUSER role (read write role) that can be allocated to the appropriate database user. When the security permissions utility, oragensec in this case, is executed it uses the role to determine the permissions. To give you a case study, my underpowered laptop has multiple installations on it of multiple products but I have one database. I create a different schema for each product and each version (with my own naming convention to help me manage the databases). I create individual users on each schema and run oragensec to maintain the permissions for each appropriately. It works fine as long I have setup the userids appropriately. This means: Creating the users with the appropriate roles. I use the common CISUSER and CISREAD role across versions and across Oracle Utilities Application Framework products. Just remember to associate the CISUSER role with the database user you want to use for read/write operations and the CISREAD role with the user you wish to use for the read only operations. The role is treated as a tag to indicate the oragensec utility which appropriate permissions to assign to the user. The utilities for the other database types essentially do the same, obviously using the technology available within those databases. Run oragensec against the read write user and read only user against the appropriate administration user (I will abbreviate the user to ADM user). This ensures the right permissions are allocated to the right users for the right products. To help me there, I use the same prefix on the user name for the same product. For example, my Oracle Utilities Application Framework V4 environment has the administration user set to FW4ADM and the associated FW4USER and FW4READ as the users for the product to use. For my MWM environment I used MWMADM for the administration user and MWMUSER and MWMREAD for my associated users. You get the picture. When I run oragensec (once for each ADM user), I know what other users to associate with it. Remember to rerun oragensec against the users if I run upgrades, service packs or database based single fixes. This assures that the users are in synchronization with the ADM user. As a side note, for those who do not understand the difference between DML, DCL and DDL: DDL (Data Definition Language) - These are SQL statements that define the database schema and the structures within. SQL Statements such as CREATE and DROP are examples of DDL SQL statements. DCL (Data Control Language) - These are the SQL statements that define the database level permissions to DDL maintained objects within the database. SQL Statements such as GRANT and REVOKE are examples of DCL SQL statements. DML (Database Manipulation Language) - These are SQL statements that alter the data within the tables. SQL Statements such as SELECT, INSERT, UPDATE and DELETE are examples of DML SQL statements. Hope this has clarified the database user support. Remember in Oracle Utilities Application Framework V4 we enhanced this by also supporting CLIENT_IDENTIFIER to allow the database to still use the administration user for the main processing but make the database session more traceable.

Read the article

Host AngularJS (Html5Mode) in ASP.NET vNext

- by Shaun

Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/06/10/host-angularjs-html5mode-in-asp.net-vnext.aspxMicrosoft had announced ASP.NET vNext in BUILD and TechED recently and as a developer, I found that we can add features into one ASP.NET vNext application such as MVC, WebAPI, SignalR, etc.. Also it's cross platform which means I can host ASP.NET on Windows, Linux and OS X. If you are following my blog you should knew that I'm currently working on a project which uses ASP.NET WebAPI, SignalR and AngularJS. Currently the AngularJS part is hosted by Express in Node.js while WebAPI and SignalR are hosted in ASP.NET. I was looking for a solution to host all of them in one platform so that my SignalR can utilize WebSocket. Currently AngularJS and SignalR are hosted in the same domain but different port so it has to use ServerSendEvent. It can be upgraded to WebSocket if I host both of them in the same port. Host AngularJS in ASP.NET vNext Static File Middleware ASP.NET vNext utilizes middleware pattern to register feature it uses, which is very similar as Express in Node.js. Since AngularJS is a pure client side framework in theory what I need to do is to use ASP.NET vNext as a static file server. This is very easy as there's a build-in middleware shipped alone with ASP.NET vNext. Assuming I have "index.html" as below. 1: <html data-ng-app="demo"> 2: <head> 3: <script type="text/javascript" src="angular.js" /> 4: <script type="text/javascript" src="angular-ui-router.js" /> 5: <script type="text/javascript" src="app.js" /> 6: </head> 7: <body> 8: <h1>ASP.NET vNext with AngularJS</h1> 9: <div> 10: <a href="javascript:void(0)" data-ui-sref="view1">View 1</a> | 11: <a href="javascript:void(0)" data-ui-sref="view2">View 2</a> 12: </div> 13: <div data-ui-view></div> 14: </body> 15: </html> And the AngularJS JavaScript file as below. Notices that I have two views which only contains one line literal indicates the view name. 1: 'use strict'; 2: 3: var app = angular.module('demo', ['ui.router']); 4: 5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10: 11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15: }]); 16: 17: app.controller('View1Ctrl', function ($scope) { 18: }); 19: 20: app.controller('View2Ctrl', function ($scope) { 21: }); All AngularJS files are located in "app" folder and my ASP.NET vNext files are besides it. The "project.json" contains all dependencies I need to host static file server. 1: { 2: "dependencies": { 3: "Helios" : "0.1-alpha-*", 4: "Microsoft.AspNet.FileSystems": "0.1-alpha-*", 5: "Microsoft.AspNet.Http": "0.1-alpha-*", 6: "Microsoft.AspNet.StaticFiles": "0.1-alpha-*", 7: "Microsoft.AspNet.Hosting": "0.1-alpha-*", 8: "Microsoft.AspNet.Server.WebListener": "0.1-alpha-*" 9: }, 10: "commands": { 11: "web": "Microsoft.AspNet.Hosting server=Microsoft.AspNet.Server.WebListener server.urls=http://localhost:22222" 12: }, 13: "configurations" : { 14: "net45" : { 15: }, 16: "k10" : { 17: "System.Diagnostics.Contracts": "4.0.0.0", 18: "System.Security.Claims" : "0.1-alpha-*" 19: } 20: } 21: } Below is "Startup.cs" which is the entry file of my ASP.NET vNext. What I need to do is to let my application use FileServerMiddleware. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5: 6: namespace Shaun.AspNet.Plugins.AngularServer.Demo 7: { 8: public class Startup 9: { 10: public void Configure(IBuilder app) 11: { 12: app.UseFileServer(new FileServerOptions() { 13: EnableDirectoryBrowsing = true, 14: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "app")) 15: }); 16: } 17: } 18: } Next, I need to create "NuGet.Config" file in the PARENT folder so that when I run "kpm restore" command later it can find ASP.NET vNext NuGet package successfully. 1: <?xml version="1.0" encoding="utf-8"?> 2: <configuration> 3: <packageSources> 4: <add key="AspNetVNext" value="https://www.myget.org/F/aspnetvnext/api/v2" /> 5: <add key="NuGet.org" value="https://nuget.org/api/v2/" /> 6: </packageSources> 7: <packageSourceCredentials> 8: <AspNetVNext> 9: <add key="Username" value="aspnetreadonly" /> 10: <add key="ClearTextPassword" value="4d8a2d9c-7b80-4162-9978-47e918c9658c" /> 11: </AspNetVNext> 12: </packageSourceCredentials> 13: </configuration> Now I need to run "kpm restore" to resolve all dependencies of my application. Finally, use "k web" to start the application which will be a static file server on "app" sub folder in the local 22222 port. Support AngularJS Html5Mode AngularJS works well in previous demo. But you will note that there is a "#" in the browser address. This is because by default AngularJS adds "#" next to its entry page so ensure all request will be handled by this entry page. For example, in this case my entry page is "index.html", so when I clicked "View 1" in the page the address will be changed to "/#/view1" which means it still tell the web server I'm still looking for "index.html". This works, but makes the address looks ugly. Hence AngularJS introduces a feature called Html5Mode, which will get rid off the annoying "#" from the address bar. Below is the "app.js" with Html5Mode enabled, just one line of code. 1: 'use strict'; 2: 3: var app = angular.module('demo', ['ui.router']); 4: 5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10: 11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15: 16: // enable html5mode 17: $locationProvider.html5Mode(true); 18: }]); 19: 20: app.controller('View1Ctrl', function ($scope) { 21: }); 22: 23: app.controller('View2Ctrl', function ($scope) { 24: }); Then let's went to the root path of our website and click "View 1" you will see there's no "#" in the address. But the problem is, if we hit F5 the browser will be turn to blank. This is because in this mode the browser told the web server I want static file named "view1" but there's no file on the server. So underlying our web server, which is built by ASP.NET vNext, responded 404. To fix this problem we need to create our own ASP.NET vNext middleware. What it needs to do is firstly try to respond the static file request with the default StaticFileMiddleware. If the response status code was 404 then change the request path value to the entry page and try again. 1: public class AngularServerMiddleware 2: { 3: private readonly AngularServerOptions _options; 4: private readonly RequestDelegate _next; 5: private readonly StaticFileMiddleware _innerMiddleware; 6: 7: public AngularServerMiddleware(RequestDelegate next, AngularServerOptions options) 8: { 9: _next = next; 10: _options = options; 11: 12: _innerMiddleware = new StaticFileMiddleware(next, options.FileServerOptions.StaticFileOptions); 13: } 14: 15: public async Task Invoke(HttpContext context) 16: { 17: // try to resolve the request with default static file middleware 18: await _innerMiddleware.Invoke(context); 19: Console.WriteLine(context.Request.Path + ": " + context.Response.StatusCode); 20: // route to root path if the status code is 404 21: // and need support angular html5mode 22: if (context.Response.StatusCode == 404 && _options.Html5Mode) 23: { 24: context.Request.Path = _options.EntryPath; 25: await _innerMiddleware.Invoke(context); 26: Console.WriteLine(">> " + context.Request.Path + ": " + context.Response.StatusCode); 27: } 28: } 29: } We need an option class where user can specify the host root path and the entry page path. 1: public class AngularServerOptions 2: { 3: public FileServerOptions FileServerOptions { get; set; } 4: 5: public PathString EntryPath { get; set; } 6: 7: public bool Html5Mode 8: { 9: get 10: { 11: return EntryPath.HasValue; 12: } 13: } 14: 15: public AngularServerOptions() 16: { 17: FileServerOptions = new FileServerOptions(); 18: EntryPath = PathString.Empty; 19: } 20: } We also need an extension method so that user can append this feature in "Startup.cs" easily. 1: public static class AngularServerExtension 2: { 3: public static IBuilder UseAngularServer(this IBuilder builder, string rootPath, string entryPath) 4: { 5: var options = new AngularServerOptions() 6: { 7: FileServerOptions = new FileServerOptions() 8: { 9: EnableDirectoryBrowsing = false, 10: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, rootPath)) 11: }, 12: EntryPath = new PathString(entryPath) 13: }; 14: 15: builder.UseDefaultFiles(options.FileServerOptions.DefaultFilesOptions); 16: 17: return builder.Use(next => new AngularServerMiddleware(next, options).Invoke); 18: } 19: } Now with these classes ready we will change our "Startup.cs", use this middleware replace the default one, tell the server try to load "index.html" file if it cannot find resource. The code below is just for demo purpose. I just tried to load "index.html" in all cases once the StaticFileMiddleware returned 404. In fact we need to validation to make sure this is an AngularJS route request instead of a normal static file request. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5: using Shaun.AspNet.Plugins.AngularServer; 6: 7: namespace Shaun.AspNet.Plugins.AngularServer.Demo 8: { 9: public class Startup 10: { 11: public void Configure(IBuilder app) 12: { 13: app.UseAngularServer("app", "/index.html"); 14: } 15: } 16: } Now let's run "k web" again and try to refresh our browser and we can see the page loaded successfully. In the console window we can find the original request got 404 and we try to find "index.html" and return the correct result. Summary In this post I introduced how to use ASP.NET vNext to host AngularJS application as a static file server. I also demonstrated how to extend ASP.NET vNext, so that it supports AngularJS Html5Mode. You can download the source code here. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Problems with Update Manager

- by user65965

Whenever I try to update with update manager I get the following errors: W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-updates/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-backports/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-security/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead. Any help would be much appreciated, thank you. Thank you very much Eliah. I'm still pretty new to Ubuntu. Here's the output I got from the terminal: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise restricted main commercial multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-updates restricted main commercial multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-security restricted main commercial multiverse universe #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu oneiric partner deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main ## This is a 3rd party script to install and update Oracle Java deb http://www.duinsoft.nl/pkg debs all ## Sun-Java6-JRE deb http://security.ubuntu.com/ubuntu hardy-security main multiverse ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list.save: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.save: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list.distUpgrade: deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps ** /etc/apt/sources.list.d/getdeb.list.save: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.save: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/iefremov-ppa-precise.list: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/iefremov-ppa-precise.list.save: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/jockey.list: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/jockey.list.distUpgrade: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree ** /etc/apt/sources.list.d/jockey.list.save: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list.save: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/precise-partner.list: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/precise-partner.list.save: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list: # deb https://justin-dormandy:[email protected]/commercial-ppa-uploaders/crossover-pro/ubuntu precise main #Added by software-center disabled on upgrade to precise ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: Permission denied ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: Permission denied ** /etc/apt/sources.list.d/screenlets-ppa-precise.list: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/screenlets-ppa-precise.list.save: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list.save: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main

Read the article

First round playing with Memcached

- by Shaun

To be honest I have not been very interested in the caching before I’m going to a project which would be using the multi-site deployment and high connection and concurrency and very sensitive to the user experience. That means we must cache the output data for better performance. After looked for the Internet I finally focused on the Memcached. What’s the Memcached? I think the description on its main site gives us a very good and simple explanation. Free & open source, high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Memcached is an in-memory key-value store for small chunks of arbitrary data (strings, objects) from results of database calls, API calls, or page rendering. Memcached is simple yet powerful. Its simple design promotes quick deployment, ease of development, and solves many problems facing large data caches. Its API is available for most popular languages. The original Memcached was built on *nix system are is being widely used in the PHP world. Although it’s not a problem to use the Memcached installed on *nix system there are some windows version available fortunately. Since we are WISC (Windows – IIS – SQL Server – C#, which on the opposite of LAMP) it would be much easier for us to use the Memcached on Windows rather than *nix. I’m using the Memcached Win X64 version provided by NorthScale. There are also the x86 version and other operation system version. Install Memcached Unpack the Memcached file to a folder on the machine you want it to be installed, we can see that there are only 3 files and the main file should be the “memcached.exe”. Memcached would be run on the server as a service. To install the service just open a command windows and navigate to the folder which contains the “memcached.exe”, let’s say “C:\Memcached\”, and then type “memcached.exe -d install”. If you are using Windows Vista and Windows 7 system please be execute the command through the administrator role. Right-click the command item in the start menu and use “Run as Administrator”, otherwise the Memcached would not be able to be installed successfully. Once installed successful we can type “memcached.exe -d start” to launch the service. Now it’s ready to be used. The default port of Memcached is 11211 but you can change it through the command argument. You can find the help by typing “memcached -h”. Using Memcached Memcahed has many good and ready-to-use providers for vary program language. After compared and reviewed I chose the Memcached Providers. It’s built based on another 3rd party Memcached client named enyim.com Memcached Client. The Memcached Providers is very simple to set/get the cached objects through the Memcached servers and easy to be configured through the application configuration file (aka web.config and app.config). Let’s create a console application for the demonstration and add the 3 DLL files from the package of the Memcached Providers to the project reference. Then we need to add the configuration for the Memcached server. Create an App.config file and firstly add the section on top of it. Here we need three sections: the section for Memcached Providers, for enyim.com Memcached client and the log4net. 1: <configSections> 2: <section name="cacheProvider" 3: type="MemcachedProviders.Cache.CacheProviderSection, MemcachedProviders" 4: allowDefinition="MachineToApplication" 5: restartOnExternalChanges="true"/> 6: <sectionGroup name="enyim.com"> 7: <section name="memcached" 8: type="Enyim.Caching.Configuration.MemcachedClientSection, Enyim.Caching"/> 9: </sectionGroup> 10: <section name="log4net" 11: type="log4net.Config.Log4NetConfigurationSectionHandler,log4net"/> 12: </configSections> Then we will add the configuration for 3 of them in the App.config file. The Memcached server information would be defined under the enyim.com section since it will be responsible for connect to the Memcached server. Assuming I installed the Memcached on two servers with the default port, the configuration would be like this. 1: <enyim.com> 2: <memcached> 3: <servers> 4:  5: <add address="192.168.0.149" port="11211"/> 6: <add address="10.10.20.67" port="11211"/> 7: </servers> 8: <socketPool minPoolSize="10" maxPoolSize="100" connectionTimeout="00:00:10" deadTimeout="00:02:00"/> 9: </memcached> 10: </enyim.com> Memcached supports the multi-deployment which means you can install the Memcached on the servers as many as you need. The protocol of the Memcached responsible for routing the cached objects into the proper server. So it’s very easy to scale-out your system by Memcached. And then define the Memcached Providers configuration. The defaultExpireTime indicates how long the objected cached in the Memcached would be expired, the default value is 2000 ms. 1: <cacheProvider defaultProvider="MemcachedCacheProvider"> 2: <providers> 3: <add name="MemcachedCacheProvider" 4: type="MemcachedProviders.Cache.MemcachedCacheProvider, MemcachedProviders" 5: keySuffix="_MySuffix_" 6: defaultExpireTime="2000"/> 7: </providers> 8: </cacheProvider> The last configuration would be the log4net. 1: <log4net> 2:  3: <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender"> 4: <layout type="log4net.Layout.PatternLayout"> 5: <conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline"/> 6: </layout> 7: </appender> 8:  9:  10: <root> 11: <priority value="WARN"/> 12: <appender-ref ref="ConsoleAppender"> 13: <filter type="log4net.Filter.LevelRangeFilter"> 14: <levelMin value="WARN"/> 15: <levelMax value="FATAL"/> 16: </filter> 17: </appender-ref> 18: </root> 19: </log4net> Get, Set and Remove the Cached Objects Once we finished the configuration it would be very simple to consume the Memcached servers. The Memcached Providers gives us a static class named DistCache that can be used to operate the Memcached servers. Get<T>: Retrieve the cached object from the Memcached servers. If failed it will return null or the default value. Add: Add an object with a unique key into the Memcached servers. Assuming that we have an operation that retrieve the email from the name which is time consuming. This is the operation that should be cached. The method would be like this. I utilized Thread.Sleep to simulate the long-time operation. 1: static string GetEmailByNameSlowly(string name) 2: { 3: Thread.Sleep(2000); 4: return name + "@ethos.com.cn"; 5: } Then in the real retrieving method we will firstly check whether the name, email information had been searched previously and cached. If yes we will just return them from the Memcached, otherwise we will invoke the slowly method to retrieve it and then cached. 1: static string GetEmailByName(string name) 2: { 3: var email = DistCache.Get<string>(name); 4: if (string.IsNullOrEmpty(email)) 5: { 6: Console.WriteLine("==> The name/email not be in memcached so need slow loading. (name = {0})==>", name); 7: email = GetEmailByNameSlowly(name); 8: DistCache.Add(name, email); 9: } 10: else 11: { 12: Console.WriteLine("==> The name/email had been in memcached. (name = {0})==>", name); 13: } 14: return email; 15: } Finally let’s finished the calling method and execute. 1: static void Main(string[] args) 2: { 3: var name = string.Empty; 4: while (name != "q") 5: { 6: Console.Write("==> Please enter the name to find the email: "); 7: name = Console.ReadLine(); 8: 9: var email = GetEmailByName(name); 10: Console.WriteLine("==> The email of {0} is {1}.", name, email); 11: } 12: } The first time I entered “ziyanxu” it takes about 2 seconds to get the email since there’s nothing cached. But the next time I entered “ziyanxu” it returned very quickly from the Memcached. Summary In this post I explained a bit on why we need cache, what’s Memcached and how to use it through the C# application. The example is fairly simple but hopefully demonstrated on how to use it. Memcached is very easy and simple to be used since it gives you the full opportunity to consider what, when and how to cache the objects. And when using Memcached you don’t need to consider the cache servers. The Memcached would be like a huge object pool in front of you. The next step I’m thinking now are: What kind of data should be cached? And how to determined the key? How to implement the cache as a layer on top of the business layer so that the application will not notice that the cache is there. How to implement the cache by AOP so that the business logic no need to consider the cache. I will investigate on them in the future and will share my thoughts and results. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

- by pinaldave

Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency. SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache. If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause. I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful. Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

Quotas - Using quotas on ZFSSA shares and projects and users

- by Steve Tunstall

So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool. Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share. Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full. That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB. So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person. Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that. Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works. Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did. Go back to any share or project. You will see that you now have four new, custom properties on the bottom. Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user. After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set. Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I? That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end. After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur. For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them. I hope these tips have helped you out there. Quotas can be fun.

Read the article

CodePlex Daily Summary for Wednesday, April 07, 2010

CodePlex Daily Summary for Wednesday, April 07, 2010New ProjectsAStar.net: AStar.net is a project for compute the A* path finding algorithm. It expose classes and interface that can be used for all purpose with multi-threa...Auto Complete for MOSS 2007: Auto Complete for MOSS 2007 (WSS 3.0) makes it easier for all user to fill list of nessesary string in the field. AutoPoco: AutoPoco is a framework with the purpose of fluently building test data from Plain Old CLR ObjectsBlueProject: BlueProjectColor Picker for MOSS 2007: Color picker for MOSS 2007 (WSS 3.0) makes it easier for some user to choose color in the field. ComBrowser2: ComBrowser2DCommunication: Communication Components and Software By Delphi On Windows.DirST: Allows one to replicate a DIRectory STructure without copying files. Written in C#.Discussion column for MOSS 2007: Discussion column for MOSS 2007/ (WSS 3.0) is a field column for different type lists such as Custom List, Document Library, Issue Tracking, not on...Effect Custom Tool for Visual Studio: Effect Custom Tool for Visual Studio is a visual studio 2008 extension that helps you generate c# classes from effect (*.fx) files for use with Xna...Energon: Energon is a framework to create and run software energy consumption tests. Requires a couple of PC with a TCP connections, a phidgets ammeter and ...Fiansa: Proyecto FiansaFirstSpark: FirstSpark is a sample Spark View Engine projectISOM: Internetowy System Obsługi Magisterek La Carta Mas Alta: La Carta Mas Alta is an open source card game totally written in PHP and HTML. This cross-platform and cross-browser game was tested under BeOS, Li...Near forums - ASP.NET MVC forum engine: Open source SEO friendly ASP.NET MVC forum engine. Features: Navigation in forums, topics and tags; login with Facebook Connect and Single sign-on;...PEC: Still editingPowershell Zip Export/Import Cmdlet Module: Powershellzip is a powershell module with a set of Cmdlets for zip file export, import and processingProgress bar for MOSS 2007: Progress bar for MOSS 2007 (WSS 3.0) makes it easier for some user to display progress in the field in percent (0-100%). SharePoint Accelerators: This project delivers a number of SharePoint accelerators that make your every-day SharePoint life easier.Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet is a simple SharePoint Foundation 2010 application that allows teams to do messaging and subscriptions in the style similar to twitter. De...SilverlightEncoder: Video and audio encoder for Silverlight 4 Out-of-BrowserStarMath: Static Array Math Library: While there are already countless math libraries for performing common matrix/array functions, StarMath is distinguished by its simplicity and flex...StringToNumber: StringToNumber is a .NET library for parsing numbers in their written form into their numeric equivalent. It's developed in C#. It was created to...SubstitutionITIS: <project name="Substitution" language="c-sharp" to="myschool" whatdo="manageSubstitutionTeachers" />TamTam.SharePoint2010.LinkedIn: SP2010 and LinkedIn working togetherThink And Explore: Think my own wayusenet-o-matic: small mobile optimised webscript to search various NZB sources like newzbin and NZBmatrix and send donwloads to your SABnzbd server. Valid HTML5 Templates for VisualStudio: This project will host valid HTML templates for Visual Studio. The primary focus however will be on the newer standard HTML5 and Visual Studio 2010XSS Attack: This tool will simulate an attack on your database and update up to 5000 rows in every table and replace your strings in your database with random ...Yazgelistir Beta: Yazgelistir'in beta sitesiNew ReleasesAStar.net: AStar.net 1.0 downloads: AStar.net 1.0 downloadsAvalaible downloads:Astar.net dll - Runtime library ready to be included in a project. Astar.net source project - The Visu...AutoPoco: 0.1 - Initial Release: This is the initial release, changes pending, lots left to do, check it out though!Bag of Tricks: Bag of Tricks - WPF - Libraries and Sample App: Here is a drop of the Bag of Tricks. It targets the 3.5 Client Profile.Boxee Launcher: Boxee Launcher 1.0.1.4: Taskbar will now be hiddenDesignit Umbraco Newsletter Package: ver 1.0.0 beta1: Please remember this is a beta version. If you have any problems or issues, don't hesitate to use the issue tracker and/or forum on this site. Ple...Effect Custom Tool for Visual Studio: Effect Custom Tool for Visual Studio 2008: Effect Custom Tool for Visual Studio is a visual studio 2008 extension that helps you generate c# classes from effect (*.fx) files for use with Xna...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.1: Fluent Ribbon Control Suite 1.1 Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples Foundation (Tabs, Groups, Contextual Tab...GsGrid: gsgrid 1.6.5: gsgrid 1.6.5Home Access Plus+: v3.2.5.2: v3.2.5.1 Release Change Log: Attempt to fix Domain Admin Lookup box File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdbHulu Launcher: Hulu Launcher 1.0.1.4: Will now hide taskbar.Icarus Scene Engine: Icarus Professional 2 Alpha 2a v 1.10.404.936: Alpha release 2 of Icarus Professional. This release includes: IcarusX: The ActiveX-based browser control for rendering IPX projects online. Icaru...kdar: KDAR 0.0.19: KDAR - Kernel Debugger Anti Rootkit - thread start notifier routine check added - registry callback сheck added - NDIS6 checks added - some bug i...Mobile Device Browser File: Mobile Device Browser File (2010-04-07): The Mobile Browser Definition File contains definitions for individual mobile devices and browsers. At run time, ASP.NET uses the information in th...MvcContrib: a Codeplex Foundation project: Portable Area Template: Use this Visual Studio 2008 Project template to create new portable areas. Drop this file in your Documents\Visual Studio 2008\Templates\ProjectTe...Office Apps: 0.8.8: new ui for Document.Viewer bug fix'sProtoforma | Tactica Adversa: Skilful 0.3.4.477: RC1ROOT Builder: ROOT Builder 1.41: Simplifies building of ROOT on the windows platform by generating a Visual Studio C make project that will build and run (and debug ROOT). See Inst...SharePoint Accelerators: Search AutoComplete for SharePoint Lists: Search AutoComplete for SharePoint List is a Web Part that allows you to search contents of a SharePoint. Search is interactive and offers you resu...SharePoint Labs: SPLab4002A-FRA-Level100: SPLab4002A-FRA-Level100 This SharePoint Lab will teach you the 2nd best practice you should apply when writing code with the SharePoint API. Lab La...SharePoint Labs: SPLab4003A-FRA-Level100: SPLab4003A-FRA-Level100 This SharePoint Lab will teach you the 3rd best practice you should apply when writing code with the SharePoint API. Lab La...SQL Compact data and schema script utility: Version 3.0: This release contains 4 downloadable files: - SSMS 2008 scripting add-in - SQL Server 2005/2008 command line utility to generate a script with sch...StarMath: Static Array Math Library: StarMath Source Files: The source file package includes the main library StarMath.dll (and it's source files), and an example exe project to invoke commands from StarMath.stefvanhooijdonk.com: Powershell Solution Install Script: Powershell Example script to install a SP2010 Solution, which actually waits for the Retraction and Deployment jobs.TamTam.SharePoint2010.LinkedIn: 0.0.0.1: How to use/install Small instruction to use this code/solution step 1 Add the Farm Solution to your SP2010 installation step 2 Go to the MySite H...usenet-o-matic: V 0.2: supports Newzbin and NZBmatrix as index sources and SABnzbd as download serverVCC: Latest build, v2.1.30406.0: Automatic drop of latest buildVisual Studio DSite: E-Z Image To PDF Converter Beta: This simple little program can convert all common image formats into pdfs and can even encrypt the pdf with an encrpytion key.Web and Load Test Plugins for Visual Studio Team Test: Release 2.0: Release 2.0 is targeted at VS 2010. VS 2010 exposes major new extensibility points: 1) Recorder plugins enable you to do custom correlations and o...Wicked Compression ASP.NET HTTP Module: WickedCompressionModule 4.0 Alpha: New Features, New Enhancements! - Visual Studio 2010 Projects! - Support for ASP.NET 2.0, 3.5, and 4.0 - AJAX Support for ASP.NET 3.5 and 4.0 - Bu...x5s - test encodings and character transformations to find XSS hotspots: x5s v1.0.0 beta: This is the v1.0 beta release of x5s. All feedback welcome in planning for the next release. Make sure Fiddler is installed prior to running th...xvanneste: Silverlight SharePoint: Fichiers du webcast sur silverlight: Silverlight OM Silverlight Webpart Silverlight Embedded ressource Silverlight List ViewYet Another Web App Monitoring Tool (YAWAMT): yawamt v0.5: A new release has seen the light :-) I've lowered the release to version 0.5 but changed some major things: - deletion of URLS works - settings can...Zinc Launcher: Zinc Launcher 1.0.1.1: Taskbar will now be hidden Delay to show Zinc was reduced to improve responsiveness.Most Popular ProjectsRawrWBFS ManagerMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.RawrFacebook Developer ToolkitShweet: SharePoint 2010 Team Messaging built with Pexpatterns & practices – Enterprise LibraryNcqrs Framework - The CQRS framework for .NETjQuery Library for SharePoint Web ServicesIonics Isapi Rewrite FilterAcadsys

Read the article

MVC Automatic Menu

- by Nuri Halperin

An ex-colleague of mine used to call his SQL script generator "Super-Scriptmatic 2000". It impressed our then boss little, but was fun to say and use. We called every batch job and script "something 2000" from that day on. I'm tempted to call this one Menu-Matic 2000, except it's waaaay past 2000. Oh well. The problem: I'm developing a bunch of stuff in MVC. There's no PM to generate mounds of requirements and there's no Ux Architect to create wireframe. During development, things change. Specifically, actions get renamed, moved from controller x to y etc. Well, as the site grows, it becomes a major pain to keep a static menu up to date, because the links change. The HtmlHelper doesn't live up to it's name and provides little help. How do I keep this growing list of pesky little forgotten actions reigned in? The general plan is: Decorate every action you want as a menu item with a custom attribute Reflect out all menu items into a structure at load time Render the menu using as CSS friendly <ul><li> HTML. The MvcMenuItemAttribute decorates an action, designating it to be included as a menu item: [AttributeUsage(AttributeTargets.Method, AllowMultiple = true)] public class MvcMenuItemAttribute : Attribute { public string MenuText { get; set; } public int Order { get; set; } public string ParentLink { get; set; } internal string Controller { get; set; } internal string Action { get; set; } #region ctor public MvcMenuItemAttribute(string menuText) : this(menuText, 0) { } public MvcMenuItemAttribute(string menuText, int order) { MenuText = menuText; Order = order; } internal string Link { get { return string.Format("/{0}/{1}", Controller, this.Action); } } internal MvcMenuItemAttribute ParentItem { get; set; } #endregion } The MenuText allows overriding the text displayed on the menu. The Order allows the items to be ordered. The ParentLink allows you to make this item a child of another menu item. An example action could then be decorated thusly: [MvcMenuItem("Tracks", Order = 20, ParentLink = "/Session/Index")] . All pretty straightforward methinks. The challenge with menu hierarchy becomes fairly apparent when you try to render a menu and highlight the "current" item or render a breadcrumb control. Both encounter an ambiguity if you allow a data source to have more than one menu item with the same URL link. The issue is that there is no great way to tell which link a person click. Using referring URL will fail if a user bookmarked the page. Using some extra query string to disambiguate duplicate URLs essentially changes the links, and also ads a chance of collision with other query parameters. Besides, that smells. The stock ASP.Net sitemap provider simply disallows duplicate URLS. I decided not to, and simply pick the first one encountered as the "current". Although it doesn't solve the issue completely – one might say they wanted the second of the 2 links to be "current"- it allows one to include a link twice (home->deals and products->deals etc), and the logic of deciding "current" is easy enough to explain to the customer. Now that we got that out of the way, let's build the menu data structure: public static List<MvcMenuItemAttribute> ListMenuItems(Assembly assembly) { var result = new List<MvcMenuItemAttribute>(); foreach (var type in assembly.GetTypes()) { if (!type.IsSubclassOf(typeof(Controller))) { continue; } foreach (var method in type.GetMethods()) { var items = method.GetCustomAttributes(typeof(MvcMenuItemAttribute), false) as MvcMenuItemAttribute[]; if (items == null) { continue; } foreach (var item in items) { if (String.IsNullOrEmpty(item.Controller)) { item.Controller = type.Name.Substring(0, type.Name.Length - "Controller".Length); } if (String.IsNullOrEmpty(item.Action)) { item.Action = method.Name; } result.Add(item); } } } return result.OrderBy(i => i.Order).ToList(); } Using reflection, the ListMenuItems method takes an assembly (you will hand it your MVC web assembly) and generates a list of menu items. It digs up all the types, and for each one that is an MVC Controller, digs up the methods. Methods decorated with the MvcMenuItemAttribute get plucked and added to the output list. Again, pretty simple. To make the structure hierarchical, a LINQ expression matches up all the items to their parent: public static void RegisterMenuItems(List<MvcMenuItemAttribute> items) { _MenuItems = items; _MenuItems.ForEach(i => i.ParentItem = items.FirstOrDefault(p => String.Equals(p.Link, i.ParentLink, StringComparison.InvariantCultureIgnoreCase))); } The _MenuItems is simply an internal list to keep things around for later rendering. Finally, to package the menu building for easy consumption: public static void RegisterMenuItems(Type mvcApplicationType) { RegisterMenuItems(ListMenuItems(Assembly.GetAssembly(mvcApplicationType))); } To bring this puppy home, a call in Global.asax.cs Application_Start() registers the menu. Notice the ugliness of reflection is tucked away from the innocent developer. All they have to do is call the RegisterMenuItems() and pass in the type of the application. When you use the new project template, global.asax declares a class public class MvcApplication : HttpApplication and that is why the Register call passes in that type. protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); MvcMenu.RegisterMenuItems(typeof(MvcApplication)); } What else is left to do? Oh, right, render! public static void ShowMenu(this TextWriter output) { var writer = new HtmlTextWriter(output); renderHierarchy(writer, _MenuItems, null); } public static void ShowBreadCrumb(this TextWriter output, Uri currentUri) { var writer = new HtmlTextWriter(output); string currentLink = "/" + currentUri.GetComponents(UriComponents.Path, UriFormat.Unescaped); var menuItem = _MenuItems.FirstOrDefault(m => m.Link.Equals(currentLink, StringComparison.CurrentCultureIgnoreCase)); if (menuItem != null) { renderBreadCrumb(writer, _MenuItems, menuItem); } } private static void renderBreadCrumb(HtmlTextWriter writer, List<MvcMenuItemAttribute> menuItems, MvcMenuItemAttribute current) { if (current == null) { return; } var parent = current.ParentItem; renderBreadCrumb(writer, menuItems, parent); writer.Write(current.MenuText); writer.Write(" / "); } static void renderHierarchy(HtmlTextWriter writer, List<MvcMenuItemAttribute> hierarchy, MvcMenuItemAttribute root) { if (!hierarchy.Any(i => i.ParentItem == root)) return; writer.RenderBeginTag(HtmlTextWriterTag.Ul); foreach (var current in hierarchy.Where(element => element.ParentItem == root).OrderBy(i => i.Order)) { if (ItemFilter == null || ItemFilter(current)) { writer.RenderBeginTag(HtmlTextWriterTag.Li); writer.AddAttribute(HtmlTextWriterAttribute.Href, current.Link); writer.AddAttribute(HtmlTextWriterAttribute.Alt, current.MenuText); writer.RenderBeginTag(HtmlTextWriterTag.A); writer.WriteEncodedText(current.MenuText); writer.RenderEndTag(); // link renderHierarchy(writer, hierarchy, current); writer.RenderEndTag(); // li } } writer.RenderEndTag(); // ul } The ShowMenu method renders the menu out to the provided TextWriter. In previous posts I've discussed my partiality to using well debugged, time test HtmlTextWriter to render HTML rather than writing out angled brackets by hand. In addition, writing out using the actual writer on the actual stream rather than generating string and byte intermediaries (yes, StringBuilder being no exception) disturbs me. To carry out the rendering of an hierarchical menu, the recursive renderHierarchy() is used. You may notice that an ItemFilter is called before rendering each item. I figured that at some point one might want to exclude certain items from the menu based on security role or context or something. That delegate is the hook for such future feature. To carry out rendering of a breadcrumb recursion is used again, this time simply to unwind the parent hierarchy from the leaf node, then rendering on the return from the recursion rather than as we go along deeper. I guess I was stuck in LISP that day.. recursion is fun though. Now all that is left is some usage! Open your Site.Master or wherever you'd like to place a menu or breadcrumb, and plant one of these calls: <% MvcMenu.ShowBreadCrumb(this.Writer, Request.Url); %> to show a breadcrumb trail (notice lack of "=" after <% and the semicolon). <% MvcMenu.ShowMenu(Writer); %> to show the menu. As mentioned before, the HTML output is nested <UL> <LI> tags, which should make it easy to style using abundant CSS to produce anything from static horizontal or vertical to dynamic drop-downs. This has been quite a fun little implementation and I was pleased that the code size remained low. The main crux was figuring out how to pass parent information from the attribute to the hierarchy builder because attributes have restricted parameter types. Once I settled on that implementation, the rest falls into place quite easily.

Read the article

wifi not recognized

- by pumper

I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

Read the article

Juju Zookeeper & Provisioning Agent Not Deployed

- by Keith Tobin

I am using juju with the openstack provider, i expected that when i bootstrap that zookeeper and provisioning agent would get deployed on the bootstrap vm in openstack. This dose not seem to be the case. the bootstrap vm gets deployed but it seems that nothing gets deployed to the VM. See logs below, I may be missing something, also how is it possible to log on the bootstrap vm. Could I manual deploy, if so what do I need to do. Juju Bootstrap commend root@cinder01:/home/cinder# juju -v bootstrap 2012-10-12 03:21:20,976 DEBUG Initializing juju bootstrap runtime 2012-10-12 03:21:20,982 WARNING Verification of xxxxS certificates is disabled for this environment. Set 'ssl-hostname-verification' to ensure secure communication. 2012-10-12 03:21:20,982 DEBUG openstack: using auth-mode 'userpass' with xxxx:xxxxxx.10:35357/v2.0/ 2012-10-12 03:21:21,064 DEBUG openstack: authenticated til u'2012-10-13T08:21:13Z' 2012-10-12 03:21:21,064 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors' 2012-10-12 03:21:21,091 DEBUG openstack: 200 '{"flavors": [{"id": "3", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/3", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/3", "rel": "bookmark"}], "name": "m1.medium"}, {"id": "4", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/4", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/4", "rel": "bookmark"}], "name": "m1.large"}, {"id": "1", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "bookmark"}], "name": "m1.tiny"}, {"id": "5", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/5", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/5", "rel": "bookmark"}], "name": "m1.xlarge"}, {"id": "2", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/2", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/2", "rel": "bookmark"}], "name": "m1.small"}]}' 2012-10-12 03:21:21,091 INFO Bootstrapping environment 'openstack' (origin: ppa type: openstack)... 2012-10-12 03:21:21,091 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state 2012-10-12 03:21:21,092 DEBUG openstack: GET 'xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state' 2012-10-12 03:21:21,165 DEBUG openstack: 200 '{}\n' 2012-10-12 03:21:21,165 DEBUG Verifying writable storage 2012-10-12 03:21:21,165 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/bootstrap-verify 2012-10-12 03:21:21,166 DEBUG openstack: PUT 'xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/bootstrap-verify' 2012-10-12 03:21:21,251 DEBUG openstack: 201 '201 Created\n\n\n\n ' 2012-10-12 03:21:21,251 DEBUG Launching juju bootstrap instance. 2012-10-12 03:21:21,271 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/juju_master_id 2012-10-12 03:21:21,273 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-groups 2012-10-12 03:21:21,273 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-groups' 2012-10-12 03:21:21,321 DEBUG openstack: 200 '{"security_groups": [{"rules": [{"from_port": -1, "group": {}, "ip_protocol": "icmp", "to_port": -1, "parent_group_id": 1, "ip_range": {"cidr": "0.0.0.0/0"}, "id": 7}, {"from_port": 22, "group": {}, "ip_protocol": "tcp", "to_port": 22, "parent_group_id": 1, "ip_range": {"cidr": "0.0.0.0/0"}, "id": 38}], "tenant_id": "d5f52673953f49e595279e89ddde979d", "id": 1, "name": "default", "description": "default"}]}' 2012-10-12 03:21:21,322 DEBUG Creating juju security group juju-openstack 2012-10-12 03:21:21,322 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-groups' 2012-10-12 03:21:21,401 DEBUG openstack: 200 '{"security_group": {"rules": [], "tenant_id": "d5f52673953f49e595279e89ddde979d", "id": 48, "name": "juju-openstack", "description": "juju group for openstack"}}' 2012-10-12 03:21:21,401 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-group-rules' 2012-10-12 03:21:21,504 DEBUG openstack: 200 '{"security_group_rule": {"from_port": 22, "group": {}, "ip_protocol": "tcp", "to_port": 22, "parent_group_id": 48, "ip_range": {"cidr": "0.0.0.0/0"}, "id": 54}}' 2012-10-12 03:21:21,504 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-group-rules' 2012-10-12 03:21:21,647 DEBUG openstack: 200 '{"security_group_rule": {"from_port": 1, "group": {"tenant_id": "d5f52673953f49e595279e89ddde979d", "name": "juju-openstack"}, "ip_protocol": "tcp", "to_port": 65535, "parent_group_id": 48, "ip_range": {}, "id": 55}}' 2012-10-12 03:21:21,647 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-group-rules' 2012-10-12 03:21:21,791 DEBUG openstack: 200 '{"security_group_rule": {"from_port": 1, "group": {"tenant_id": "d5f52673953f49e595279e89ddde979d", "name": "juju-openstack"}, "ip_protocol": "udp", "to_port": 65535, "parent_group_id": 48, "ip_range": {}, "id": 56}}' 2012-10-12 03:21:21,792 DEBUG Creating machine security group juju-openstack-0 2012-10-12 03:21:21,792 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-security-groups' 2012-10-12 03:21:21,871 DEBUG openstack: 200 '{"security_group": {"rules": [], "tenant_id": "d5f52673953f49e595279e89ddde979d", "id": 49, "name": "juju-openstack-0", "description": "juju group for openstack machine 0"}}' 2012-10-12 03:21:21,871 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/detail 2012-10-12 03:21:21,871 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/detail' 2012-10-12 03:21:21,906 DEBUG openstack: 200 '{"flavors": [{"vcpus": 2, "disk": 10, "name": "m1.medium", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/3", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/3", "rel": "bookmark"}], "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 40, "ram": 4096, "id": "3", "swap": ""}, {"vcpus": 4, "disk": 10, "name": "m1.large", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/4", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/4", "rel": "bookmark"}], "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 80, "ram": 8192, "id": "4", "swap": ""}, {"vcpus": 1, "disk": 0, "name": "m1.tiny", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "bookmark"}], "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 0, "ram": 512, "id": "1", "swap": ""}, {"vcpus": 8, "disk": 10, "name": "m1.xlarge", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/5", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/5", "rel": "bookmark"}], "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 160, "ram": 16384, "id": "5", "swap": ""}, {"vcpus": 1, "disk": 10, "name": "m1.small", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/flavors/2", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/2", "rel": "bookmark"}], "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 20, "ram": 2048, "id": "2", "swap": ""}]}' 2012-10-12 03:21:21,907 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers 2012-10-12 03:21:21,907 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers' 2012-10-12 03:21:22,284 DEBUG openstack: 202 '{"server": {"OS-DCF:diskConfig": "MANUAL", "id": "a598b402-8678-4447-baeb-59255409a023", "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "bookmark"}], "adminPass": "SuFp48cZzdo4"}}' 2012-10-12 03:21:22,284 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/juju_master_id 2012-10-12 03:21:22,285 DEBUG openstack: PUT 'xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/juju_master_id' 2012-10-12 03:21:22,375 DEBUG openstack: 201 '201 Created\n\n\n\n ' 2012-10-12 03:21:27,379 DEBUG Waited for 5 seconds for networking on server u'a598b402-8678-4447-baeb-59255409a023' 2012-10-12 03:21:27,380 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023 2012-10-12 03:21:27,380 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023' 2012-10-12 03:21:27,556 DEBUG openstack: 200 '{"server": {"OS-EXT-STS:task_state": "networking", "addresses": {"private": [{"version": 4, "addr": "10.0.0.8"}]}, "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "bookmark"}], "image": {"id": "5bf60467-0136-4471-9818-e13ade75a0a1", "links": [{"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/images/5bf60467-0136-4471-9818-e13ade75a0a1", "rel": "bookmark"}]}, "OS-EXT-STS:vm_state": "building", "OS-EXT-SRV-ATTR:instance_name": "instance-00000060", "flavor": {"id": "1", "links": [{"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "bookmark"}]}, "id": "a598b402-8678-4447-baeb-59255409a023", "user_id": "01610f73d0fb4922aefff09f2627e50c", "OS-DCF:diskConfig": "MANUAL", "accessIPv4": "", "accessIPv6": "", "progress": 0, "OS-EXT-STS:power_state": 0, "config_drive": "", "status": "BUILD", "updated": "2012-10-12T08:21:23Z", "hostId": "1cdb25708fb8e464d83a69fe4a024dcd5a80baf24a82ec28f9d9f866", "OS-EXT-SRV-ATTR:host": "nova01", "key_name": "", "OS-EXT-SRV-ATTR:hypervisor_hostname": null, "name": "juju openstack instance 0", "created": "2012-10-12T08:21:22Z", "tenant_id": "d5f52673953f49e595279e89ddde979d", "metadata": {}}}' 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 2012-10-12 03:21:27,557 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-floating-ips 2012-10-12 03:21:27,557 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/os-floating-ips' 2012-10-12 03:21:27,815 DEBUG openstack: 200 '{"floating_ips": [{"instance_id": "a0e0df11-91c0-4801-95b3-62d910d729e9", "ip": "xxxx.35", "fixed_ip": "10.0.0.5", "id": 447, "pool": "nova"}, {"instance_id": "b84f1a42-7192-415e-8650-ebb1aa56e97f", "ip": "xxxx.36", "fixed_ip": "10.0.0.6", "id": 448, "pool": "nova"}, {"instance_id": null, "ip": "xxxx.37", "fixed_ip": null, "id": 449, "pool": "nova"}, {"instance_id": null, "ip": "xxxx.38", "fixed_ip": null, "id": 450, "pool": "nova"}, {"instance_id": null, "ip": "xxxx.39", "fixed_ip": null, "id": 451, "pool": "nova"}, {"instance_id": null, "ip": "xxxx.40", "fixed_ip": null, "id": 452, "pool": "nova"}, {"instance_id": null, "ip": "xxxx.41", "fixed_ip": null, "id": 453, "pool": "nova"}]}' 2012-10-12 03:21:27,815 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023/action 2012-10-12 03:21:27,816 DEBUG openstack: POST 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023/action' 2012-10-12 03:21:28,356 DEBUG openstack: 202 '' 2012-10-12 03:21:28,356 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state 2012-10-12 03:21:28,357 DEBUG openstack: PUT 'xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state' 2012-10-12 03:21:28,446 DEBUG openstack: 201 '201 Created\n\n\n\n ' 2012-10-12 03:21:28,446 INFO 'bootstrap' command finished successfully Juju Status Command root@cinder01:/home/cinder# juju -v status 2012-10-12 03:23:28,314 DEBUG Initializing juju status runtime 2012-10-12 03:23:28,320 WARNING Verification of xxxxS certificates is disabled for this environment. Set 'ssl-hostname-verification' to ensure secure communication. 2012-10-12 03:23:28,320 DEBUG openstack: using auth-mode 'userpass' with xxxx:xxxxxx.10:35357/v2.0/ 2012-10-12 03:23:28,320 INFO Connecting to environment... 2012-10-12 03:23:28,403 DEBUG openstack: authenticated til u'2012-10-13T08:23:20Z' 2012-10-12 03:23:28,403 DEBUG access object-store @ xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state 2012-10-12 03:23:28,403 DEBUG openstack: GET 'xxxx:xx10.49.113.11:8080/v1/AUTH_d5f52673953f49e595279e89ddde979d/juju-hpc-az1-cb/provider-state' 2012-10-12 03:23:35,480 DEBUG openstack: 200 'zookeeper-instances: [a598b402-8678-4447-baeb-59255409a023]\n' 2012-10-12 03:23:35,480 DEBUG access compute @ xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023 2012-10-12 03:23:35,480 DEBUG openstack: GET 'xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023' 2012-10-12 03:23:35,662 DEBUG openstack: 200 '{"server": {"OS-EXT-STS:task_state": null, "addresses": {"private": [{"version": 4, "addr": "10.0.0.8"}, {"version": 4, "addr": "xxxx.37"}]}, "links": [{"href": "xxxx:xxxxxx.15:8774/v1.1/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "self"}, {"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/servers/a598b402-8678-4447-baeb-59255409a023", "rel": "bookmark"}], "image": {"id": "5bf60467-0136-4471-9818-e13ade75a0a1", "links": [{"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/images/5bf60467-0136-4471-9818-e13ade75a0a1", "rel": "bookmark"}]}, "OS-EXT-STS:vm_state": "active", "OS-EXT-SRV-ATTR:instance_name": "instance-00000060", "flavor": {"id": "1", "links": [{"href": "xxxx:xxxxxx.15:8774/d5f52673953f49e595279e89ddde979d/flavors/1", "rel": "bookmark"}]}, "id": "a598b402-8678-4447-baeb-59255409a023", "user_id": "01610f73d0fb4922aefff09f2627e50c", "OS-DCF:diskConfig": "MANUAL", "accessIPv4": "", "accessIPv6": "", "progress": 0, "OS-EXT-STS:power_state": 1, "config_drive": "", "status": "ACTIVE", "updated": "2012-10-12T08:21:40Z", "hostId": "1cdb25708fb8e464d83a69fe4a024dcd5a80baf24a82ec28f9d9f866", "OS-EXT-SRV-ATTR:host": "nova01", "key_name": "", "OS-EXT-SRV-ATTR:hypervisor_hostname": null, "name": "juju openstack instance 0", "created": "2012-10-12T08:21:22Z", "tenant_id": "d5f52673953f49e595279e89ddde979d", "metadata": {}}}' 2012-10-12 03:23:35,663 DEBUG Connecting to environment using xxxx.37... 2012-10-12 03:23:35,663 DEBUG Spawning SSH process with remote_user="ubuntu" remote_host="xxxx.37" remote_port="2181" local_port="45859". 2012-10-12 03:23:36,173:4355(0x7fd581973700):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-10-12 03:23:36,173:4355(0x7fd581973700):ZOO_INFO@log_env@662: Client environment:host.name=cinder01 2012-10-12 03:23:36,174:4355(0x7fd581973700):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-10-12 03:23:36,174:4355(0x7fd581973700):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-23-generic 2012-10-12 03:23:36,174:4355(0x7fd581973700):ZOO_INFO@log_env@671: Client environment:os.version=#36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 2012-10-12 03:23:36,174:4355(0x7fd581973700):ZOO_INFO@log_env@679: Client environment:user.name=cinder 2012-10-12 03:23:36,174:4355(0x7fd581973700):ZOO_INFO@log_env@687: Client environment:user.home=/root 2012-10-12 03:23:36,175:4355(0x7fd581973700):ZOO_INFO@log_env@699: Client environment:user.dir=/home/cinder 2012-10-12 03:23:36,175:4355(0x7fd581973700):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=localhost:45859 sessionTimeout=10000 watcher=0x7fd57f9146b0 sessionId=0 sessionPasswd= context=0x2c1dab0 flags=0 2012-10-12 03:23:36,175:4355(0x7fd577fff700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:45859] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-10-12 03:23:39,512:4355(0x7fd577fff700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:45859] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-10-12 03:23:42,848:4355(0x7fd577fff700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:45859] zk retcode=-4, errno=111(Connection refused): server refused to accept the client ^Croot@cinder01:/home/cinder#

Read the article

ubuntu 12.04 python problem or?

- by Trki

Hi i am trying to fix this for a long time but without success. When i open my zsh terminal i get this error: (terminal is working but error appear) Welcome to the world of tomorrow! virtualenvwrapper_run_hook:12: permission denied: virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON= and that PATH is set properly. I tried few things but... dont know how to solve it. Somehow during looking for a search i found i should post here an output of: ? sudo dpkg --configure -a Setting up python-pip (1.0-1build1) ... /var/lib/dpkg/info/python-pip.postinst: 6: /var/lib/dpkg/info/python-pip.postinst: pycompile: not found dpkg: error processing python-pip (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libc-dev-bin (2.15-0ubuntu10.5) ... Setting up gnome-control-center-data (1:3.4.2-0ubuntu0.13) ... Setting up linux-libc-dev (3.2.0-56.86) ... Setting up python-virtualenv (1.7.1.2-1) ... /var/lib/dpkg/info/python-virtualenv.postinst: 6: /var/lib/dpkg/info/python-virtualenv.postinst: pycompile: not found dpkg: error processing python-virtualenv (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libglib2.0-0 (2.32.4-0ubuntu1) ... Setting up libglib2.0-0:i386 (2.32.4-0ubuntu1) ... Setting up gimp (2.6.12-1ubuntu1.2) ... /var/lib/dpkg/info/gimp.postinst: 11: /var/lib/dpkg/info/gimp.postinst: pycompile: not found dpkg: error processing gimp (--configure): subprocess installed post-installation script returned error exit status 127 Setting up libpolkit-gobject-1-0 (0.104-1ubuntu1.1) ... Setting up libgnome-control-center1 (1:3.4.2-0ubuntu0.13) ... Setting up libnm-util2 (0.9.4.0-0ubuntu4.3) ... Setting up libc6-dev (2.15-0ubuntu10.5) ... Setting up libpulse-mainloop-glib0 (1:1.1-0ubuntu15.4) ... dpkg: dependency problems prevent configuration of virtualenvwrapper: virtualenvwrapper depends on python-virtualenv; however: Package python-virtualenv is not configured yet. dpkg: error processing virtualenvwrapper (--configure): dependency problems - leaving unconfigured Setting up libpolkit-agent-1-0 (0.104-1ubuntu1.1) ... Setting up libupower-glib1 (0.9.15-3git1ubuntu0.1) ... Setting up libaccountsservice0 (0.6.15-2ubuntu9.6.1) ... Setting up libpolkit-backend-1-0 (0.104-1ubuntu1.1) ... Setting up libglib2.0-bin (2.32.4-0ubuntu1) ... Setting up libnm-glib4 (0.9.4.0-0ubuntu4.3) ... Setting up policykit-1 (0.104-1ubuntu1.1) ... Setting up gnome-settings-daemon (3.4.2-0ubuntu0.6.4) ... Setting up accountsservice (0.6.15-2ubuntu9.6.1) ... dpkg: error processing ubuntu-system-service (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: python-pip python-virtualenv gimp virtualenvwrapper ubuntu-system-service Also: ? python --version zsh: command not found: python Part of my ~/.zshrc # python virtual env wrapper if [ -f ~/.local/bin/virtualenvwrapper.sh ]; then export WORKON_HOME=~/.virtualenvs source ~/.local/bin/virtualenvwrapper.sh plugins=("${plugins[@]}" virtualenvwrapper) fi # pythonbrew [[ -s ~/.pythonbrew/etc/bashrc ]] && source ~/.pythonbrew/etc/bashrc Part os zsh -xv # # Invoke the initialization functions # virtualenvwrapper_initialize +/home/trki/.local/bin/virtualenvwrapper.sh:1179> virtualenvwrapper_initialize +virtualenvwrapper_initialize:1> virtualenvwrapper_derive_workon_home +virtualenvwrapper_derive_workon_home:1> typeset 'workon_home_dir=/home/trki/.virtualenvs' +virtualenvwrapper_derive_workon_home:5> [ /home/trki/.virtualenvs '=' '' ']' +virtualenvwrapper_derive_workon_home:12> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:12> unset GREP_OPTIONS +virtualenvwrapper_derive_workon_home:12> grep '^[^/~]' +virtualenvwrapper_derive_workon_home:21> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:21> unset GREP_OPTIONS +virtualenvwrapper_derive_workon_home:21> egrep '([\$~]|//)' +virtualenvwrapper_derive_workon_home:30> echo /home/trki/.virtualenvs +virtualenvwrapper_derive_workon_home:31> return 0 +virtualenvwrapper_initialize:1> export 'WORKON_HOME=/home/trki/.virtualenvs' +virtualenvwrapper_initialize:3> virtualenvwrapper_verify_workon_home -q +virtualenvwrapper_verify_workon_home:1> RC=0 +virtualenvwrapper_verify_workon_home:2> [ ! -d /home/trki/.virtualenvs/ ']' +virtualenvwrapper_verify_workon_home:11> return 0 +virtualenvwrapper_initialize:6> [ /home/trki/.virtualenvs '=' '' ']' +virtualenvwrapper_initialize:11> virtualenvwrapper_run_hook initialize +virtualenvwrapper_run_hook:1> typeset hook_script +virtualenvwrapper_run_hook:2> typeset result +virtualenvwrapper_run_hook:4> hook_script=+virtualenvwrapper_run_hook:4> virtualenvwrapper_tempfile initialize-hook +virtualenvwrapper_tempfile:2> typeset 'suffix=initialize-hook' +virtualenvwrapper_tempfile:3> typeset file +virtualenvwrapper_tempfile:5> file=+virtualenvwrapper_tempfile:5> virtualenvwrapper_mktemp -t virtualenvwrapper-initialize-hook-XXXXXXXXXX +virtualenvwrapper_mktemp:1> mktemp -t virtualenvwrapper-initialize-hook-XXXXXXXXXX +virtualenvwrapper_tempfile:5> file=/tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_tempfile:6> [ 0 -ne 0 ']' +virtualenvwrapper_tempfile:6> [ -z /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 ']' +virtualenvwrapper_tempfile:6> [ ! -f /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 ']' +virtualenvwrapper_tempfile:11> echo /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_tempfile:12> return 0 +virtualenvwrapper_run_hook:4> hook_script=/tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_run_hook:11> cd /home/trki/.virtualenvs +cd:1> [[ x/home/trki/.virtualenvs == x... ]] +cd:3> [[ x/home/trki/.virtualenvs == x.... ]] +cd:5> [[ x/home/trki/.virtualenvs == x..... ]] +cd:7> [[ x/home/trki/.virtualenvs == x...... ]] +cd:9> [ -d /home/trki/.autoenv ']' +cd:13> cd /home/trki/.virtualenvs +virtualenvwrapper_run_hook:12> '' -m virtualenvwrapper.hook_loader --script /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 initialize virtualenvwrapper_run_hook:12: permission denied: +virtualenvwrapper_run_hook:15> result=126 +virtualenvwrapper_run_hook:17> [ 126 -eq 0 ']' +virtualenvwrapper_run_hook:27> [ initialize '=' initialize ']' +virtualenvwrapper_run_hook:29> cat - virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON= and that PATH is set properly. +virtualenvwrapper_run_hook:38> rm -f /tmp/virtualenvwrapper-initialize-hook-OhY86PXmo7 +virtualenvwrapper_run_hook:39> return 126 +virtualenvwrapper_initialize:13> virtualenvwrapper_setup_tab_completion +virtualenvwrapper_setup_tab_completion:1> [ -n '' ']' +virtualenvwrapper_setup_tab_completion:20> [ -n 4.3.17 ']' +virtualenvwrapper_setup_tab_completion:30> compctl -K _virtualenvs workon rmvirtualenv cpvirtualenv showvirtualenv +virtualenvwrapper_setup_tab_completion:31> compctl -K _cdvirtualenv_complete cdvirtualenv +virtualenvwrapper_setup_tab_completion:32> compctl -K _cdsitepackages_complete cdsitepackages +virtualenvwrapper_initialize:15> return 0 +/home/trki/.zshrc:17> plugins=( git python django symfony2 zsh-syntax-highlighting composer history-substring-search virtualenvwrapper ) # pythonbrew [[ -s ~/.pythonbrew/etc/bashrc ]] && source ~/.pythonbrew/etc/bashrc +/home/trki/.zshrc:21> [[ -s /home/trki/.pythonbrew/etc/bashrc ]] Also when i try to open ubuntu software center absolutly nothing happens. No idea what to do now.

Read the article

Drivers for NVIDIA 520M not working in Ubuntu 12.04

- by Don

I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

Read the article

CodePlex Daily Summary for Sunday, September 02, 2012

CodePlex Daily Summary for Sunday, September 02, 2012Popular ReleasesThisismyusername's codeplex page.: HTML5 Multitouch Example - Fruit Ninja in HTML5: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. This example isn't responsive enough, so I will be working on that, and it doesn't have great graphics, either. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but here the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixRuminate XNA 4.0 GUI: Release 1.1.1: Fixed bugs with Slider and TextBox. Added ComboBox.Confuser: Confuser build 76542: This is a build of changeset 76542.SharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....New ProjectsATSV: this is a student project for making a new silverlight UI Bookmark Collector: This project is a best practice example of how to use content items in DotNetNuke. It allows you to quickly and easily manage a listing of external links.BPVotingmachine: BP Vote SystemClean My Space: Sort your files in a fun and fast! With Clean My Space you can!CutePlatform: CutePlatform is a platform game based around the PlanetCute graphics pack from Daniel cook, make him a visit in www.lostgardem.comDancTeX: This project is targeting the integration of LaTeX into VisusalStudio. Epi Info™ Companion for Android: A mobile companion to the Epi Info™ 7 desktop tool for epidemiologic data collection and analysis.Flucene: Object Document Mapper for Lucene.Netfluentserializer: FluentSerializer is a library for .NET usable to create serialize/deserialize data through its fluent interface. The methods it creates are compiled.hongjiapp: hongjiappidealthings educational comprehensive administration system: ?????????????????????????????????????????????.Java Accounting Library: The project aims at providing a Financial Accounting Java Library which may be integrated to any other Java Application independent of its Backend Database.mycnblogs: mycnblogsNETPack: Lightweight and flexible packer for .NETRandom Useful Code: This project is where I will store various useful classes I have built over time. Only the code will be provided, no Library or the like.Suleymaniye Tavimi: Namaz vakitleri hesaplama uygulamasidir. Istenilen yer için hesaplama yapar.

Read the article

Cannot ping router with a static IP assigned?

- by Uriah

Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

Read the article

CodePlex Daily Summary for Monday, September 03, 2012

CodePlex Daily Summary for Monday, September 03, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.01.03: Cambios Aury: Ajuste del margen del reporte. Visualización de la columna de Supuestos en la parte del módulo de Decisión. Cambios John: Integración de código con cambios enviados por Aury Niño. Generación de instaladores. Soporte técnico por correo electrónico y telefónico.Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...Thisismyusername's codeplex page.: HTML5 Mulititouch Fruit Ninja Proof of Concept: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. Sorry this example doesn't have great graphics. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but since I'm only using a Codeplex page and most mobile devices can't open .zip files, the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.TSQL Code Smells Finder: POC 1.01: Proof of concept 1.01 TSQLDomTest.ps1 and Errors.Txt are requiredConfuser: Confuser build 76542: This is a build of changeset 76542.Reactive State Machine: ReactiveStateMachine-beta: TouchStateMachine now supports Microsoft Surface 2.0 SDK. The TouchStateMachine is an extension to the Reactive State Machine. Reactive State Machine uses NuGet for dependency managementSharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...New ProjectsBPVote4PPT: BPVote For PowerPointCosmo OS: La semplicità in un OSFinancial Analytic Tools: C#.Net Financial Analytic ToolsGeminiMVC: An Open Source CMS written in ASP.net MVC 4 with speed, extensibility, and ease-of-us in mind.JQuery SharePoint Autocomplete People Picker: This JQUery bundle provides an autocomplete people picker based on SharePoint profiles. It can be hosted on the SharePoint itself or on remote applications.Kerbal Space Program PartModule Library: This project is designed to add various functionalities to custom parts for the space program simulation game Kerbal Space Program.KeyboardRemapper: This tool to remaps keys in the keyboard. If you have more than one keyboard or an additional keypad, you can remap the keys of the each keyboard independentlyKHStudent: ??????Localized DataAnnotations with T4 templates: Simplified DataAnnotations localization using T4 templates.MfcLightToolkit: Supports development for small and simple MFC application. Provides asynchronous programming model like .NET, file download, easy control resizing, and so on.Müslüm ÖZTÜRK Code Lib: Test amaçli olusturulan projemdirPolska: Testproject in how a polish grammerprogram can look like.QueueLessApp: Here is the codeRusIS.CMS: aaaSGPS: Projeto de controle de produtos e serviçosStemmersNet: Stemmers pack for .Net FrameworkTrabajo Final de Ingenieria - Javier Vallejos: Tesis Final de la carrera de Ingenieria - Universidad Abierta Interamericana.TSQL Code Smells Finder: TSQL 'smells' findersXNA and Data Driven Design: This project includes links for XNA and Data Driven DesignXNA and System Testing: This project includes code for XNA and System TestingYUGI-AR Project: an open source project for yugioh based augmented reality???????? ? ?????????????: ???? ??????? ??????? ?????????????? ??????????? ?????????? ??? ? ????? ?????? ? ? ??? ??? ????? ? ??? ?????????? ????????????.

Read the article

Migrating ASP.NET MVC 1.0 applications to ASP.NET MVC 2 RTM

- by Eilon

Note: ASP.NET MVC 2 RTM isn’t yet released! But this tool will help you get your ASP.NET MVC 1.0 applications ready for when it is! I have updated the MVC App Converter to convert projects from ASP.NET MVC 1.0 to ASP.NET MVC 2 RTM. This should be last the last major change to the MVC App Converter that I released previews of in the past several months. Download The app is a single executable: Download MvcAppConverter-MVC2RTM.zip (255 KB). Usage The only requirement for this tool is that you have .NET Framework 3.5 SP1 on the machine. You do not need to have Visual Studio or ASP.NET MVC installed (unless you want to open your project!). Even though the tool performs an automatic backup of your solution it is recommended that you perform a manual backup of your solution as well. To convert an ASP.NET MVC 1.0 project built with Visual Studio 2008 to an ASP.NET MVC 2 project in Visual Studio 2008 perform these steps: Launch the converter Select the solution Click the “Convert” button To convert an ASP.NET MVC 1.0 project built with Visual Studio 2008 to an ASP.NET MVC 2 project in Visual Studio 2010: Wait until Visual Studio 2010 is released (next month!) and it will have a built-in version of this tool that will run automatically when you open an ASP.NET MVC 1.0 project Perform the above steps, then open the project in Visual Studio 2010 and it will perform the remaining conversion steps What it can do Open up ASP.NET MVC 1.0 projects from Visual Studio 2008 (no other versions of ASP.NET MVC or Visual Studio are supported) Create a full backup of your solution’s folder For every VB or C# project that has a reference to System.Web.Mvc.dll it will (this includes ASP.NET MVC web application projects as well as ASP.NET MVC test projects): Update references to ASP.NET MVC 2 Add a reference to System.ComponentModel.DataAnnotations 3.5 (if not already present) For every VB or C# ASP.NET MVC Web Application it will: Change the project type to an ASP.NET MVC 2 project Update the root ~/web.config references to ASP.NET MVC 2 Update the root ~/web.config to have a binding redirect from ASP.NET MVC 1.0 to ASP.NET MVC 2 Update the ~/Views/web.config references to ASP.NET MVC 2 Add or update the JavaScript files (add jQuery, add jQuery.Validate, add Microsoft AJAX, add/update Microsoft MVC AJAX, add Microsoft MVC Validation adapter) Unknown project types or project types that have nothing to do with ASP.NET MVC will not be updated What it can’t do It cannot convert projects directly to Visual Studio 2010 or to .NET Framework 4. It can have issues if your solution contains projects that are not located under the solution directory. If you are using a source control system it might have problems overwriting files. It is recommended that before converting you check out all files from the source control system. It cannot change code in the application that might need to be changed due to breaking changes between ASP.NET MVC 1.0 and ASP.NET MVC 2. Feedback, Please! If you need to convert a project to ASP.NET MVC 2 please try out this application and hopefully you’re good to go. If you spot any bugs or features that don’t work leave a comment here and I will try to address these issues in an updated release.

Read the article

How to use crontab, .netrc, and git push?

- by Jon

Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

Read the article

asynchrony is viral

- by Daniel Moth

It is becoming hard to write code today without introducing some form of asynchrony and, if you are using .NET (e.g. for Windows Phone 8 or Windows Store apps), that means sooner or later you have to await something and mark your method as async. My most recent examples included introducing speech recognition in my Translator By Moth phone app where I had to await mySpeechRecognizerUI.RecognizeWithUIAsync() and when moving that code base to a Windows Store project just to show a MessageBox I had to await myMessageDialog.ShowAsync(). Any time you need to invoke an asynchronous method in your code, you have a choice to make: kick off the operation but don’t wait for it to complete (otherwise known as fire-and-forget), synchronously wait for it to complete (which will entail blocking, which can be bad, especially on a UI thread), or asynchronously wait for it to complete before continuing on with the rest of the method’s work. In most cases, you want the latter, and the await keyword makes that trivial to implement. When you use the magical await keyword in front of an API call, then you typically have to make additional changes to your code: This await usage is within a method of course, and now you have to annotate that method with async. Furthermore, you have to change the return type of the method you just annotated so it returns a Task (if it previously returned void), or Task<myOldReturnType> (if it previously returned myOldReturnType). Note that if it returns void, in some cases you could cheat and stop there. Furthermore, any method that called this method you just annotated with async will now also be invoking an asynchronous operation, so you have to make that change in the body of the caller method to introduce the await keyword before the call to the method. …you guessed it, you now have to change this caller method to be annotated with async and have its return types tweaked... …and it goes on virally… At some point you reach the root of your user code, e.g. a GUI event handler, and whoever calls that void method can already deal with the fact that you marked it as async and the viral introduction of the keywords stops there… This is all wonderful progress and a very powerful mechanism, and I just wish someone had written a refactoring tool to take care of this… anyone? I mentioned earlier that you have a choice when invoking an asynchronous operation. If the first time you encounter this you wish to localize the impact of all these changes and essentially try to turn the asynchronous behavior into synchronous by blocking - don't! For reasons why you don't want to do that, read Toub's excellent blog post (and check out the rest of his blog with gems on async programming starting with the Async FAQ). Just embrace the pattern knowing that when you use one instance of an await, you'll propagate the change all the way to the root user code method, e.g. typically an event handler. Related aside: I just finished re-writing my MessageBox wrapper class for Phone projects, including making it work in Windows Store projects, and it does expect you to use it with an await :-). I'll share that in an upcoming post for those of you that have the same need… Comments about this post by Daniel Moth welcome at the original blog.

Read the article

How to fix Software Center crashes?

- by shandna towns

E: Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list E: The list of sources could not be read. shandanatowns@ubuntu:~$ software-center 2012-09-25 12:23:35,115 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-09-25 12:23:35,123 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:34:20: Not using units is deprecated. Assuming 'px'. (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:34:22: Not using units is deprecated. Assuming 'px'. (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:56:20: Not using units is deprecated. Assuming 'px'. (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:56:22: Not using units is deprecated. Assuming 'px'. (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:60:20: Not using units is deprecated. Assuming 'px'. (software-center:4524): Gtk-WARNING **: Theme parsing error: softwarecenter.css:60:22: Not using units is deprecated. Assuming 'px'. 2012-09-25 12:23:35,472 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-09-25 12:23:35,477 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/gi/importer.py', 51, 'find_module')' 2012-09-25 12:23:35,477 - root - ERROR - Could not find any typelib for LaunchpadIntegration 2012-09-25 12:23:35,605 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-09-25 12:23:35,987 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 257, in open self._cache = apt.Cache(progress) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 102, in __init__ self.open(progress) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 149, in open self._list.read_main_list() SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list 2012-09-25 12:23:37,000 - softwarecenter.db.enquire - ERROR - _get_estimate_nr_apps_and_nr_pkgs failed Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/db/enquire.py", line 115, in _get_estimate_nr_apps_and_nr_pkgs tmp_matches = enquire.get_mset(0, len(self.db), None, xfilter) File "/usr/share/software-center/softwarecenter/db/appfilter.py", line 89, in __call__ if (not pkgname in self.cache and File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 277, in __contains__ return self._cache.__contains__(k) AttributeError: 'NoneType' object has no attribute '__contains__' Traceback (most recent call last): File "/usr/bin/software-center", line 182, in <module> app.run(args) File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 1385, in run self.show_available_packages(args) File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 1323, in show_available_packages self.view_manager.set_active_view(ViewPages.AVAILABLE) File "/usr/share/software-center/softwarecenter/ui/gtk3/session/viewmanager.py", line 151, in set_active_view view_widget.init_view() File "/usr/share/software-center/softwarecenter/ui/gtk3/panes/availablepane.py", line 173, in init_view self.cache, self.db, self.icons, self.apps_filter) File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 81, in __init__ self.build() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 322, in build self._build_homepage_view() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 120, in _build_homepage_view self._append_whats_new() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 251, in _append_whats_new whats_new_cat = self._update_whats_new_content() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 236, in _update_whats_new_content docs = whats_new_cat.get_documents(self.db) File "/usr/share/software-center/softwarecenter/db/categories.py", line 132, in get_documents nonblocking_load=False) File "/usr/share/software-center/softwarecenter/db/enquire.py", line 317, in set_query self._blocking_perform_search() File "/usr/share/software-center/softwarecenter/db/enquire.py", line 212, in _blocking_perform_search matches = enquire.get_mset(0, self.limit, None, xfilter) File "/usr/share/software-center/softwarecenter/db/appfilter.py", line 89, in __call__ if (not pkgname in self.cache and File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 277, in __contains__ return self._cache.__contains__(k) AttributeError: 'NoneType' object has no attribute '__contains__'

Read the article

Scid Chess Program Compiling issue

- by lbochitt

First of all I would like to point that I'm new to Ubuntu so sorry if what I am asking is ridiculous. I have downloaded Scid 4.4 chess program and I have tried to compile it as it was explained on its website: 1) Initialize git. 2) Create a folder where you want to download and (?) compile the source, then cast: git init on your command line. 3) You're now ready to download the sources recall Fulvio's spell: git clone git://scid.git.sourceforge.net/gitroot/scid/scid This should get you the latest Scid source. 4) You're now ready to compile Scid. In principle, all you need to do is: ./configure and then make 5) If you get stuck, you probably need to get developer versions of tcl/tk. This translates into issuing these three commands: sudo apt-get install tcl8.5-dev sudo apt-get install tk8.5-dev sudo apt-get install zlib1g -dev 6) You should now be ready to compile The problem is that when I run ./configure to start compiling the following message appears on Terminal: configure: Makefile configuration program for Scid Tcl/Tk version: 8.5 Your operating system is: Linux 3.8.0-19-generic Location of "tcl.h": /usr/include/tcl8.5 Location of "tk.h": /usr/include/tcl8.5 Location of Tcl 8.5 library: not found Location of Tk 8.5 library: not found Checking if your system already has zlib installed: yes. Using Makefile.conf. Not all settings could be determined! The default Makefile was written. You will need to edit it before you can compile Scid. What should I do? Has anybody faced this problem before? Thanks in advance I have run ls -l /usr/include/tcl8.5/tcl.h here's the result: -rw-r--r-- 1 root root 87291 abr 22 10:45 /usr/include/tcl8.5/tcl.h I have also tried what you suggested Could you run git reset --hard HEAD and git clean -d -f to clean up everything using Git? Then run ./configure again. Just a shot in the dark - I've seen some GNU automake stuff still listening to its "cached" version of the results or something. Still no solution. I don't know why it can't recognize the library though it is installed I opened configure to see where the program looked for the library. This is the code: # libraryPath: List of possible locations of Tcl/Tk library. set libraryPath { /usr/lib /usr/lib64 /usr/local/tcl/lib /usr/local/lib /usr/X11R6/lib /opt/tcltk/lib /usr/lib/x86_64-linux-gnu } lappend libraryPath "/usr/lib/tcl${tclv}" lappend libraryPath "/usr/lib/tk${tclv}" lappend libraryPath "/usr/lib/tcl${tclv_nodot}" lappend libraryPath "/usr/lib/tk${tclv_nodot}" # Try to add tcl_library and auto_path values to libraryPath, # in case the user has a non-standard Tcl/Tk library location: if {[info exists ::tcl_library]} { lappend headerPath \ [file join [file dirname [file dirname $::tcl_library]] include] lappend libraryPath [file dirname $::tcl_library] lappend libraryPath $::tcl_library } if {[info exists ::auto_path]} { foreach name $::auto_path { lappend libraryPath $name } } if {! [info exists var(TCL_INCLUDE)]} { puts -nonewline { Location of "tcl.h": } set opt(tcl_h) [findDir "tcl.h" $headerPath "TCL_VERSION.*$tclv"] if {$opt(tcl_h) == ""} { puts "not found" set success 0 set opt(tcl_h) "$::defaultVar(TCL_INCLUDE)" } else { puts $opt(tcl_h) } } set opt(tcl_lib) "" if {! [info exists var(TCL_LIBRARY)]} { puts -nonewline " Location of Tcl $tclv library: " set opt(tcl_lib) [findDir "libtcl${tclv}.*" $libraryPath] if {$opt(tcl_lib) == ""} { set opt(tcl_lib) [findDir "libtcl${tclv_nodot}.*" $libraryPath] if {$opt(tcl_lib) == ""} { puts "not found" set success 0 set opt(tcl_lib) "$opt(tcl_h)" set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" } else { set opt(tcl_lib_file) "tcl${tclv_nodot}" puts $opt(tcl_lib) } } else { set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" puts $opt(tcl_lib) } } if {! [info exists var(TCL_INCLUDE)]} { set var(TCL_INCLUDE) "-I$opt(tcl_h)" } if {! [info exists var(TCL_LIBRARY)]} { set var(TCL_LIBRARY) "-L$opt(tcl_lib) -l$opt(tcl_lib_file)" } return $success So I guess (And by guess I mean i have no idea how to code) I should write somewhere in here usr/lib/tcl8.5 and usr/lib/tk8.5, am I right?

Read the article

Ubuntu-one syncs single files, but not directories [closed]

- by Luiz Cláudio Duarte

I'm using Ubuntu 10.10, fully updated. I have tried to sync my ~/Documents and ~/Pictures folders; U1 replicates the directory structure, but no files are uploaded. Next I tried to sync a single file inside ~/Ubuntu One and it was synced. Then I tried to put a directory inside ~/Ubuntu One and, again, the directory structure was replicated, but no files were synced. All the files have the "syncing" icon, however. The latest syncdaemon.log is below: 2011-03-30 07:41:50,752 - ubuntuone.SyncDaemon.fsm - INFO - loading updated metadata 2011-03-30 07:41:55,081 - ubuntuone.SyncDaemon.fsm - INFO - initialized: idx_path: 266, idx_node_id: 266, shares: 1 2011-03-30 07:41:55,082 - ubuntuone.SyncDaemon.GeneralINotProc - INFO - Ignoring files: ['\\A#.*\\Z', '\\A.*~\\Z', '\\A.*\\.py[oc]\\Z', '\\A.*\\.sw[nopx]\\Z', '\\A.*\\.swpx\\Z', '\\A\\..*\\.tmp\\Z'] 2011-03-30 07:41:55,083 - ubuntuone.SyncDaemon.HQ - INFO - HashQueue: _hasher started 2011-03-30 07:41:55,902 - ubuntuone.SyncDaemon.DBus - INFO - DBusInterface initialized. 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/Ubuntu One' as root dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/.local/share/ubuntuone/syncdaemon' as data dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - INFO - Using '/home/l_claudius/.local/share/ubuntuone/shares' as shares root dir 2011-03-30 07:41:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'INIT' (queues IDLE connection 'Not User Not Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1 miss=266) ---- 2011-03-30 07:41:55,904 - ubuntuone.SyncDaemon.Main - NOTE - Local rescan starting... 2011-03-30 07:41:55,904 - ubuntuone.SyncDaemon.local_rescan - INFO - start scan all volumes 2011-03-30 07:41:55,906 - ubuntuone.SyncDaemon.local_rescan - INFO - processing trash 2011-03-30 07:41:56,044 - ubuntuone.SyncDaemon.local_rescan - INFO - processing move limbo 2011-03-30 07:41:56,491 - ubuntuone.SyncDaemon.Main - NOTE - Local rescan finished! 2011-03-30 07:41:56,492 - ubuntuone.SyncDaemon.Main - INFO - hash queue empty. We are ready! 2011-03-30 07:42:15,583 - ubuntuone.SyncDaemon.DBus - INFO - u'CredentialsFound': callbacking with credentials (token_name: None). 2011-03-30 07:42:15,584 - ubuntuone.SyncDaemon.DBus - INFO - connect: credential request was successful, pushing SYS_USER_CONNECT. 2011-03-30 07:42:15,617 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection started to host fs-1.one.ubuntu.com, port 443. 2011-03-30 07:42:15,977 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection made. 2011-03-30 07:42:15,978 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection made. 2011-03-30 07:42:16,581 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'protocol_version' finished OK. 2011-03-30 07:42:16,774 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'caps_raising_if_not_accepted' finished OK. 2011-03-30 07:42:16,966 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'caps_raising_if_not_accepted' finished OK. 2011-03-30 07:42:17,722 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'oauth_authenticate' finished OK. 2011-03-30 07:42:17,723 - ubuntuone.SyncDaemon.ActionQueue - NOTE - Session ID: '563bc960-35fa-4f44-b9b6-125819656dc3' 2011-03-30 07:42:19,258 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'list_volumes' finished OK. 2011-03-30 07:43:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:45:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:47:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:49:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ---- 2011-03-30 07:51:55,903 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'QUEUE_MANAGER' (queues IDLE connection 'With User With Network')>; queues: metadata: 0; content: 0; hash: 0, fsm-cache: hit=1059 miss=266) ----

Read the article

How can I back up my ubuntu system?

- by Eloff

I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

Read the article

No database selected error in CodeIgniter running on MAMP stack

- by Apophenia Overload

First off, does anyone know of a good place to get help with CodeIgniter? The official community forums are somewhat disappointing in terms of getting many responses. I have ci installed on a regular MAMP stack, and I’m working on this tutorial. However, I have only gone through the Created section, and currently I am getting a No database selected error. Model: <?php class submit_model extends Model { function submitForm($school, $district) { $data = array( 'school' => $school, 'district' => $district ); $this->db->insert('your_stats', $data); } } View: <?php $this->load->helper('form'); ?> <?php echo form_open('main'); ?> <p> <?php echo form_input('school'); ?> </p> <p> <?php echo form_input('district'); ?> </p> <p> <?php echo form_submit('submit', 'Submit'); ?> </p> <?php echo form_close(); ?> Controller: <?php class Main extends controller { function index() { // Check if form is submitted if ($this->input->post('submit')) { $school = $this->input->xss_clean($this->input->post('school')); $district = $this->input->xss_clean($this->input->post('district')); $this->load->model('submit_model'); // Add the post $this->submit_model->submitForm($school, $district); } $this->load->view('main_view'); } } database.php $db['default']['hostname'] = "localhost:8889"; $db['default']['username'] = "root"; $db['default']['password'] = "root"; $db['default']['database'] = "stats_test"; $db['default']['dbdriver'] = "mysql"; $db['default']['dbprefix'] = ""; $db['default']['pconnect'] = TRUE; $db['default']['db_debug'] = TRUE; $db['default']['cache_on'] = FALSE; $db['default']['cachedir'] = ""; $db['default']['char_set'] = "utf8"; $db['default']['dbcollat'] = "utf8_general_ci"; config.php $config['base_url'] = "http://localhost:8888/ci/"; ... $config['index_page'] = "index.php"; ... $config['uri_protocol'] = "AUTO"; So, how come it’s giving me this error message? A Database Error Occurred Error Number: 1046 No database selected INSERT INTO `your_stats` (`school`, `district`) VALUES ('TJHSST', 'FairFax') Is there any way for me to test if CodeIgniter can actually detect the mySQL databases I've created with phpMyAdmin in my MAMP stack?

Search Results

Search found 14709 results on 589 pages for 'root permission'.

Page 260/589 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >

- by Rohan Kumar

- by Anthony Shorten

- by Shaun

- by user65965

- by Shaun

- by pinaldave

- by Steve Tunstall

- by Nuri Halperin

- by pumper

- by Keith Tobin

- by Trki

- by Don

- by Uriah

- by Eilon

- by Jon

- by Daniel Moth

- by shandna towns

- by lbochitt

- by Luiz Cláudio Duarte

- by Eloff

- by Apophenia Overload

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >