Search Results

Search found 8831 results on 354 pages for 'intel graphics'.

Page 261/354 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Origin of display connector numbers in XServer (e.g. HDMI1, HDMI2, DP1)

  - by Andreas N

  a custom mainboard has a DVI and a DisplayPort connector on the board. Currently, everything that is connected at DVI will be named "HDMI2" in XServer. I can see that by calling the "xrandr" tool (in Ubuntu Trusty Tahr). A display connected to the DP connector will be named "DP1" or "HDMI1", if I use a DP-to-DVI adapter. We are now testing a slightly upgraded board version, which has a newer CPU (Intel J1800, Baytrail) among other things and the position of the DVI and DP connectors are switched. Also, everything at the DVI port is called "HDMI1" and something connected to the DP port gets "DP2" or "HDMI2". Q: What causes these numbers to be produced in this manner and where (probably in the kernel) is it happening? I suspect the cause to be hardware related. Specifically, at which CPU pins the connector pins are routed and attached to. Q: Would it be possible to influence this numbering scheme in order to retain the previous numbering behaviour?

  Read the article

• Laptop monitor being very dark, no backlight?

  - by ldigas

  I'm asking for a diagnose of what is probably the problem. Here goes ... laptop monitor (hp 6715s) went dark. I'm using also an external monitor with the laptop, and since it kept its picture, I'm guessing it's not the graphics card. When the night came, and I turned on my desk lamp, I noticed that the laptop monitor is not really not showing anything, but is actually showing my desktop picture - only it's very very very dark. You cannot see anything on it, unless the lamp is focused on it, then you can see the picture, only very dark. Does anybody have any clue what it could be? I'm just looking for informed guessed here, so I have at least some idea of where the problem lies. The closest repair shop is quite some distance away, so going for a bit of self-diagnose before thinking of taking it to them.

  Read the article

• Windows 7 very slow after restart, but fine after complete shutdown?

  - by lkm

  I have a Dell pc running Windows 7 with the Intel i3 processor. Whenever I restart the computer, the os crawls. For example, I move the mouse and then I see it move on the screen 10 seconds later... Everything runs slowly. This happens only on a restart (it's fine when I turn it on after it has been shut down). Any ideas what is causing this (I haven't installed any new software since buying it). Does it sound like a hardware or software issue?

  Read the article

• What is the best CPU I could get for my old setup?

  - by cmbrnt

  On my current not-so-good desktop computer, I'm currently running an Intel Core 2 Duo E6550-CPU, and I'm thinking of buying a newer one now that these must be cheap on E-bay and the like. Being a software guy, I'd be grateful for any help in identifying what CPUs that would fit my motherboard so I don't buy a processor which won't work with my computer. It might not be worth it however, since the SATA2-drive is currently what's bottlenecking my system, but I'm still curious about what could be done except for buying an SSD-drive. I'm providing screenshots of CPU-Z running, to help with the identification. My CPU- and motherboard info: http://i.imgur.com/YdO8x.png

  Read the article

• Slow remote desktop connection to VPS

  - by Jonathan

  When I use Windows 7's remote desktop connection to our company's VPS (Win Server 2008 32bit) I receive a very slow connection - most of the times it actually grinds down to a complete halt. This is in contrast to my team mates which have no problem remoting to the VPS. I'm using a brand new Dell Studio 1558 laptop with Intel Core i7 and 4GB RAM with a clean installation of Windows 7 64bit Ultimate. Any suggestions for how to diagnose \ solve \ workaround the problem would be appreciated. UPDATES: I checked, and it seems the problem exists with all the computers connected to my home LAN. Once I take my laptop to the nearest coffee shop it works fine. What could be the problem with the LAN?

  Read the article

• Timing startup processes?

  - by acidzombie24

  My Windows 7 use to boot up fast and now its getting rather slow. I suspect one program is eating up all the time yet i cant tell what it is since task manager shows <40% of the cpu being used. What can i use to track how long each process takes when my computer boots/starts up? Note: Except for launchy which i used before my comp became slow, all my startup and services are all signed and known (broadcom, VMWare, Google Inc, Intel, etc) Note2: I am mostly considering the time it takes after i login but i suspect the time before that is slightly slower (i dont think very much though)

  Read the article

• need help setting up a VPN for remote computer connection

  - by Chowdan

  I am on a low budget right now. I am currently in the process of starting a computer company. I am in need of a VPN network so I can run Dameware tools for working on customers/partners computers remotely. I will be working with Windows and some Apple and linux machines. I have desktop with an AMD Phenom II 965BE(currently running stable at 3.8Ghz) processor with 8 GB of ram and a radeon hd 6870(i know graphics aren't too useful) and about 1.5TB of HDD space. I am attempting to create a network out of my office based all on one machine that would also be secure for me to remotely connect to my partners computers so when they have issues I would be able to connect and do the diagnosing and repairs remotely. What types of servers besides a VPN server would i need to create this? I have access to all Microsoft products so I can run Windows Server 2012, Windows Server 2008 R2, or any other Microsoft Software. thanks for the help all

  Read the article

• phpmyadmin error #2002 cannot connect to mysql server

  - by Joe

  I am getting the error in the title when trying to connect to my MySQL server. I have reinstalled MySQL and PHP several times and tried a slew of command line work based on information I searched out. web.mysql is running and I know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. I also have plenty of hard drive space. I have installed and setup phpMyAdmin correctly only adding a password to 'Password for config auth'. I have also connected to the server via Sequel Pro. Why can't I connect to the server via phpMyAdmin? I'm on a 64-bit Intel Mac running Snow Leopard

  Read the article

• What do BCU.exe and BCUService actually do?

  - by ChrisF

  I've got a Gigabyte G32M-ES2L motherboard with an Intel Core 2 Duo E7500 2.93GHz CPU running Windows XP SP3 (fully up to date). Today when I booted the machine my firewall (Sygate Personal Firewall) warned me that BCUService.exe wanted to make a call out to the internet. Wondering what they were I did a Google search and while I found out that these programs weren't malware, I didn't find out what they actually do. The information seemed to boil down to: Part of Browser Configuration Utility Auto-recovery Service from DeviceVM, Inc. This program is not important for your system process, but should not be terminated unless suspected to be causing problems. Source So before I remove them from my system does anyone know what they actually do and its it worth them taking over 4Mb of memory?

  Read the article

• Is the quadro 4000 still worth it's price? [closed]

  - by aknewhope

  I am going to be purchasing a quadro graphics card for learning 3d CAD at work. It's not critical I have it right now otherwise I would just buy the current 4000 (PC). I am buying this with my own money and am concerned Nvidia will release a new Quadro 4000 sometime in the near months. Is the current 4000 still worth it's price tag at $700.00? If i were to purchase it, how long would it be useful? I am going to be running E-PLAN, SOLIDWORKS, DRAFTSIGHT, MASTERCAM. My computer is a second generation i7-2600k with z68 chipset (intel DZ68BC mobo).

  Read the article

• EC2 Windows 2008 VM import Not Working

  - by remack

  I am trying to upload a Windows 2008 SP2 server image to Amazon EC2, but once the process is complete, I can't connect to it. I had ops export a VMDK from our datacenter. The image appeared to have a fixed IP, so I loaded it in VMWare player and enabled DHCP. I uploaded it following amazon's instructions: http://aws.amazon.com/ec2/vmimport/ I start the new instance and try to RDP to the public DNS; connection fails. My two thoughts are: Loading it in VMWare player messed it up somehow, since the instructions say use an ESX image. The image they made me had the wrong network adapter type. The image has an Intel(R) PRO/1000 MT adapter using the E1G60I32.sys driver.

  Read the article

• Why does using 2 memory sticks cause my computer to crash?

  - by hi

  My computer randomly crashes when playing games, but if I remove one memory stick (it does not matter which one I remove), it does not crash anymore. Memory tests do not find errors, I just put in a new power supply (650W), I only have 1 graphics card, so why is this happening? BTW, they are the same memory, same vendor same specs, everything I bought it together (2x2GB) My motherboard is a Asus P5Q Pro, so it supports both dual channel and more than 4gb. Switching slots does nothing, as long as I don't use more than 1 I'm fine.

  Read the article

• Manage 2 displays remotely

  - by neurino

  I have a pc with a nVidia Quadro graphic card. The card has 2 DisplayPort outs where 2 40" Full HD TV are connected. I need to run 2 separate fullscreen videos, one each display. The problem is displays are far from the pc station and I cannot control them from there. I tried with a remote desktop connection but when I connect screen 1 shows login and screen 2 simply blackens (I'm logged off). The pc, an HP, also has his native graphics card still installed it would be nice if I could connect there a 15" monitor with the desktop on and use the TVs only as secondary where I can send fullscreen videos. Any clue?

  Read the article

• Tuning Nvidia driver in Nvidia X Server Settings in Ubuntu to avoid tearing?

  - by c00kiemonster

  I'm running Ubuntu 10.10 on an Asus at3ion motherboard. I have installed the proprietary nvidia drivers and everything is working fine, but it's a but ragged when I move windows etc. I think the issue is called tearing. There is flickering and the window isn't refreshed smoothly. The ion acceleration works fine (I am running xbmc at 1080p completely without any issues). Please note I am not interested in any fancy effects etc, I just want the graphics to be smooth and nice. How can I tune the nvidia driver for this, i.e., what do I need to change in the Nvidia X Server Settings?

  Read the article

• Booting drops to EFI shell but boots normally if exit'ed

  - by wittybear

  (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

  Read the article

• Help me diagnose Windows 7 pc issue

  - by lkm

  I have a dell pc running windows 7 with the intel i3 processor. Whenever I restart the computer, the os crawls. For example, I move the mouse and then I see it move on the screen 10 seconds later...everything runs slowly. This happens only on a restart (its fine when I turn it on after it has been shut down). Any ideas what is causing this (I haven't installed any new software since buying it). Does it sound like a hardware or software issue? Thanks

  Read the article

• How to make one CPU to be used simulataneously be three different users

  - by beginning_steps

  As a bootstrapping start-up we are thinking of saving on the IT hardware cost by making more use of the hardware that we have. As a solopreneur I have a laptop config : intel core2duo processor, 3Gb RAM and 250 GB RAM. Now we are planning to increase our team to 3 members. Will like your suggestions on the nest cost-effective step that I can take so that I can use the computing power of the existing laptop to act as a kind of server and then buy to more monitors where the new recruits can do the daily work on and they need to have different login id and access and they dont need access to all the files/applications as are available in my laptop. We use internet intensively to do our day to day activity. Please share you experience, whether you think this is a good ploy or there is any other more effective way of achieving the same result.

  Read the article

• Program for managing multiple monitors to keep from rearranging Windows

  - by Rumel

  I have a setup in use where I use up to four monitors. The problem is I generally switch around what I'm using and that messes up where all of my windows are. I'm on Windows 8 and have two graphics cards. My setup is as follows: Monitor 1: Card 1 Monitor 2: Card 1 Monitor 3: Card 2 TV 1: Card 2 I almost always have all the monitors turned on and in use. When I turn on the TV though, all of my windows get reconfigured and moved to different monitors. I don't know how to stop this. Another configuration I use is where I have Monitors 1 and 2 plus TV in use, and I have my Xbox in use on Monitor 3. When I get done with the Xbox and switch Monitor 3 over to the PC, everything is reconfigured. So is there a program out there that can help with this? I have the free version of Display Fusion in use but haven't seen settings to save monitor configurations.

  Read the article

• One motherboard crashed. Changed and wants to crash again

  - by CoachNono

  My computer started to freeze randomly. I was pretty sure it was the hard drive that was starting to fail. Before I could change it, the motherboard was completely dead. I bought the same one and reinstall it. Everything went working well until my computer started to freeze again and doing the same problem has before. I don't want my motherboard to burn again and I'm really wondering what can be the problem... Could it be the power supply or the video cards that burned the motherboard ? I tested the voltages of the power supply and they seemed fine... The computer worked as is for four years... Here are the specs: ASUS P5N-D Motherboard LGA 775 NVIDIA 750i SLI Intel Q6600 2X EN9600GT 512mb 650w Corsair

  Read the article

• Maximize window in one display

  - by P23

  I'm using an NVIDIA Quadra FX 1700 card and have a dual monitor system. I want to maximize a window so that it is maximized in one monitor not across both monitors but I don't seem to have that as an option. Right now I just minimize & expand it so it fills one monitor at a time. Any suggestions? I'm using Windows XP Professional on a desktop. Maybe it's not possible since it seems that both monitors are connected to the graphics card and Windows only sees one monitor.

  Read the article

• what may cause unexpected log outs?

  - by lalebarde

  Sometimes, my Linux PC unexpectedly closes my session (log out) while I am working, and puts me back the login window. If I have terminal 1 logged with root and 2 logged with another user (without X), these ones are not logged out. For example, for the last three hours, it has happened five times. Other times, it leads to a reboot. So I have investigated: the UPS, but the behaviour is unchanged without it). the temperatures, but everything is fine (cpu, disks, video card). I have started to investigate also: the memory (partially tested - I have to run a full testyt next night). EDIT: totally tested and passed. My configuration is: Linux 2.6.37-tuxonice x86_64 Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz. Any idea please?

  Read the article

• Ubuntu server header timeout

  - by Tabatha M

  I'm running Ubuntu Linux 12.04.1 Kernel and CPU Linux 3.2.0-30-generic on x86_64. Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 8 cores I recently came across this problem. I'm using apache2/php latest and when I run $url_headers = @get_headers($url); Inside PHP it would normally take milliseconds to within a second to get the headers. Now recently it can take up to 15 seconds or even timeout. It has worked great for over a year and recently started doing this. I'm not sure how to go about fixing it, any help would be greatly appreciated. Thank you

  Read the article

• Why I'm unable to use up/down arrows in my BIOS?

  - by nexus

  My BIOS is loading and when I wanted to change anything, the up/down arrows aren't working. What might be the problem? I want to change boot options, but I'm unable to select the boot from CD option. My BIOS version is f2.3. Do I need to upgrade it? I need my system for 2 more months continuously and I'm afraid if there might be some problem upgrading. But anyway, what might be the cause for this behavior? For you info I have the pavilion dv6 series laptop, BIOS version: f.23 processer: Intel(R) core(TM) i3 CPU M 370 @ 2.40ghz 2.40GHZ 2.40 GHZ

  Read the article

• ssh on Window Vista and Ubuntu 12.04

  - by Adebayo

  Greeting to all. On my Fijitsu system with intel processor, I could not ssh from my Window Vista partition using PUTTY and also could not ssh from my Ubuntu 12.04 partition. I am try to ssh into a remote machine where I have an account but I always get Connection refused. But from the desktop computer in my office using the same PUTTY I could ssh to remote machine. I have tried to follow several comments but none has worked for me. Please, I need help.

  Read the article

• Is \d equal to [0-9] in sed?

  - by user3872279

  7 00:00:30,008 --> 00:00:30,066 by line 8 00:00:31,038 --> 00:00:34,050 or later in the nineteen seventies it was usually a 9 00:00:34,005 --> 00:00:38,634^M video consul but the council was not capable of displaying arbitrate graphics 10 The above lines is in a file named 2.txt. I wanna the lines which doesn't start with number. In practice, sed -i '/^[0-9]+/d' 2.txt works good. However, sed -i '/^\d+/d' 2.txt doesnot. The \d shouldn't be equal to [0-9] in regex?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >