Search Results

Search found 11839 results on 474 pages for 'email forwarding'.

Page 262/474 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • Hostname Problem On WHM / cPanel Installation

    - by Eray
    My CentOS 5.6 server's hostname was "centos" . And then i change it to my domain : hostname domain.com And i started to installing WHM / cPanel as explained in here : http://etwiki.cpanel.net/twiki/bin/view/AllDocumentation/InstallationGuide/InstallingCpanel It's installed very well. And the i reboot my server. After rebooting, i was execute this command for open WHM's 2087 port : iptables -I RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 2087 -j ACCEPT Now i'm trying to browse domain.com:2087 i'm getting Server (centos) not found .I noticed it's forwarding to my old hostname (centos) . And then execute this command to verify me hostname hostname it's returned "centos" again. I'm not sure, why it's returned to old hostname. (I think it returned to old hostname after rebooting) . I'm changed it one more time : hostname domain.com Finally, now my hostname is domain.com . BUt still i'm getting centos server not found error. This is result of iptables -L command. P.S. : domain.com/cpanel is working

    Read the article

  • Cannot connect to xdebug over virtual network - Vagrant Virtualbox

    - by smix96
    I'm trying to set up a development box using Virtualbox / Vagrant / Puppet with the intention of eventually provisioning all my machines up to production. However this is stopping me going forward at the moment. I've installed ubuntu lucid over windows 7. When trying to connect to xdebug by starting a debugging session in eclipse, it hangs at 57% (common in eclipse when it cannot communicate with xdebug). Here is my xdebug.ini and the settings here are appearing in phpinfo(). xdebug.remote_enable=On xdebug.remote_handler=dbgp xdebug.remote_host=192.168.56.1 xdebug.remote_port=9000 I'm now wondering if it's an issue with port forwarding? If eclipse is looking on port 9000, will it find port 9000 on a virtual machine? Any help would be greatly appreciated!

    Read the article

  • One-way forest trust between geographically distributed forests using Server 2008 R2

    - by bwerks
    Hi all, I'm planning out a joinder between two domains, as would take place with contracting companies. Forests A and B exist in distant sites, and there is to be a one-way forest trust so that domain users in Forest A can be authenticated on machines in Forest B. In order to facilitate this, each forest's domain controller must be able to contact each other in order to set up & confirm the trust, but my question is what underlying networking magic must take place beneath it. So far the prevailing approach has been to maintain a VPN connection between the two sites, but the technet documentation seems to indicate that DNS forwarding may be the way to go. Is this the case? Furthermore, if DNS will suffice, does that mean that there must be a server running DNS on boundary servers in each domain so that they can be reached from across the internet? How must they be configured? Thanks!

    Read the article

  • Can i have a Asterisk IP PBX Server Behind ISA 2000

    - by garyb32234234
    Hello Is it a simple procedure to configure ISA Server 2000 to allow an Asterisk IPPBX connect to SIP provider. On asterisk forums they say the ISA has difficulties handling SIP, softphones that i have installed behind the firewall work fine with the provider when the firewall client is installed on the workstation. With asterisk being a linux based system this will not be an option. Is the config a matter setting up port forwarding, is this a more complicated task on ISA server than just selecting the ports i need and then the ip of the internal machine i want to forward them to? UPDATE: I dont think this is possible from what ive researched Regards Gary

    Read the article

  • Edimax wireless router is not providing DNS services correctly

    - by Nathan Fellman
    I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

    Read the article

  • Problems setting up home web server

    - by putmatrix
    Has anyone been able to get a server working with the router smcwbr14t-g? Although I have been able to get Apache set up correctly and my website works on the internal IP 192.168.2.101, I've been running into a dead end when trying to get it to show up on my external IP. In my router, there is no option for port forwarding, but there are options for a 'virtual server'. Following the manual, I have it set up like this: http://imgur.com/zrcV7.png I also disabled the firewall. I configured Apache to listen to ports 80, 81, and 443, none of which solved the problem. However, the IP's 192.168.2.101:443 and :81 load fine. The problem is that I still cannot load the web site from my external IP, either from my computer or outside.

    Read the article

  • Forward one RDP port on one machine to multiple external users at the same time

    - by matnagel
    We have a windows server 2003 machine with rdp service listening on the standard port 3389. For security reasons this port is not opened on the router, but we have freesshd service running and a remote admin can login via ssh and this port is forwarded to external port 33001 for the first external user. This works great. Now we have another admin who wants to work remote (he uses a different windows account, but needs to work on the same machine.) So this is basically a ssh port forwarding question. Will the other user be able to login at the same time using the same port 33001 ? Please keep in mind that there will be a second tunnel, and this second tunnel will also use the local port 3389 on the windows server.

    Read the article

  • Configure Nginx On Separate Server For Zimbra Webmail

    - by alphadogg
    How do I properly configure a server with nginx to front for a Zimbra server with multiple domains? I run a small SOHO network. I NAT/port forwarding on my Comcast router to get traffic to my handful of servers. I setup a server with Zimbra, call it host1.internal.local. The server currently has two domains, call them domain1.com and domain2.com. Both offer webmail access at webmail.domain1.com and webmail.domain2.com. I have a separate server with nginx. I want to configure nginx to reverse proxy, such that I can direct all HTTP/HTTPS, and send webmail traffic via matched host address/headers to the Zimbra server. If possible, I'd like to know how to map IMAP, POP and SMTP traffic too. How would I do this?

    Read the article

  • Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

    - by josecortesp
    Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

    Read the article

  • Why does iis produce 500 response on all requests?

    - by HMR
    In IIS 7.5 on Windows webserver 2008 I get a 500 response on any request. Checking in firebug if I'm being forwarded but the request is made and no forwarding, just get 500 response with a page that looks like Symfony response page. Disabled all url re writes and requested index.html (still get 500) checked error pages under featured settings and detailed errors is checked. Checked the php error log and no writes have been made for several days. I think someone has fiddled with the IIS server settings and got it to return 500 for any request (even locally) but I'm not able to find what it is. [UPDATE] While I was writing this and listing things I've tried I tried selecting detailed error messages at the root node, not the site node. Looks like some idiot changed file permissions so that IIS can no longer read the config file.

    Read the article

  • Add a remote printer over ssh on OSX?

    - by GradGuy
    I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

    Read the article

  • How to access website on localhost from internet?

    - by Nitesh Panchal
    Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

    Read the article

  • router w/ WOL out-of-the-box, or is known to work with open firmware

    - by Jaroslav Záruba
    I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed to dd-wrt I'd prefer if the new one supported WOL out-of-the-box. other required features would be: dyndns service support port forwarding sometimes it is called "virtual server" I guess NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes) did I mention WiFi? preferably w/ some range extending technology, if such stuff works at all

    Read the article

  • remote desktop to Fedora 20 with xrdp

    - by 5YrsLaterDBA
    I was able to setup xrdp on my Fedora 13 machine and access it from my Windows 7 machine by follow the steps on the first post on this thread It was simple and easy. But when i try the same on my Fefora 20 machine, things are quite different. There is no error message but some new info like these: # chkconfig --levels 35 xrdp on Note: Forwarding request to 'systemctl enable xrdp.service'. # service xrdp start Redirecting to /bin/systemctl start xrdp.service and then I cannot remote it from my window machine. I also did the following based on the last post of above threa: # yum -y install tigervnc-server Any configuration I should do to make xrdp works for me? I was able to ping each other. EDIT: I can access the shared folder on my Windows machine from my Fedora 20. It seems the problem is on the Fedora side. how to know the service on linux is running? The "service --status-all" cannot give me useful information.

    Read the article

  • open ports on a cisco/linksys wrt54g2 v1.5

    - by Crash893
    Im upgradeing my router from a netgear fvs318 one of the problems im running into is on the old net gear i have opend ports under the "Add Service " for our voip udp 69 tcp 80 tcp 2000 udp 22026-62025 but on the new linksys/cisco rotuer i don't see any option to just open a port i see port forwarding (which i dont want because i have more than one phone) and port triggering that i have no idea what that does. does anyone know either how to allow open ports on this router or how to use port tiggering to allow my phones to work with the ports listed above?

    Read the article

  • 3CX behind UT7.1 using a callcentric.com SIP account

    - by Corey
    Has anyone had any luck with getting 3CX working behind UT7.1 with a SIP account from callcentric.com? I am willing to reset my current UT box back to defaults, and start from there. I have a static public IP assigned to the external interface. My internal addressing is 192.168.76.0 . My 3CX box has 192.168.76.17 . Would anyone be willing to give me a step by step of changes to make in UT / 3CX. I currently have my UT box unplugged, and have replaced it with a Linksys unit. I have port forwarding setup for… TCP/UDP 5060 to 192.168.76.17 UDP 9000-9049 to 192.168.76.17 … and everything works great. I also have additional external IPs available if that helps.

    Read the article

  • Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

    - by Michael
    Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

    Read the article

  • Wake on Lan/Wan won't work after some time has passsed

    - by Vian Esterhuizen
    I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

    Read the article

  • Changing linksys router configuration from command-line

    - by Dan
    I am constantly logged into (ssh'd) my home machine (ubuntu) from various remote locations. Sometimes I would like to change my home linksys router settings (change the port forwarding settings or disable/enable wireless, things like that). When I try and use the links2 text browser, there isn't much I can do because the tab titles don't show up (presumably because they are pictures?). Is there another way of configuring a linksys router from a command line? I guess my only other option is to set up a proxy on my home machine and use a browser connected to that proxy to configure it, but I would think there might be a non-browser way of doing it. Thanks

    Read the article

  • How can I fix my Virtual PC 2007 network configuration

    - by DanJ
    Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

    Read the article

  • How to configure squid for retrieving (and caching) directly my static resources?

    - by fabien7474
    I have an Apache/Tomcat/Spring tc Server running on CentOS EC2 VM. I would like to install squid on the same machine as a proxy for retrieving (directly i.e. without forwarding the request to Apache/Tomcat) and caching static content ONLY identified by URIs : /images, /css or /js. Other URIs should be forwarded to the normal Web Server and not cached. Since I am a newbie, I didn't find from squid documentation how to configure squid for this desired behavior (and if it is even possible). Could you please help me and tell me how should I configure squid for this purpose? Thank you.

    Read the article

  • Why aren't Heroku syslog drains logging to rsyslogd?

    - by Benjamin Oakes
    I'm having a problem using syslog drains as described in https://devcenter.heroku.com/articles/logging. To summarize, I have an Ubuntu 10.04 instance on EC2 that is running rsyslogd. I've also set up the security groups as they describe, and added a syslog drain using a command like heroku drains:add syslog://host1.example.com:514. I can send messages from the Heroku console to my rsyslogd instance via nc. I see them appear in the log file, so I know there isn't a firewall/security group issue.  However, Heroku does not seem to be forwarding log messages to the server that heroku drains lists. I would expect to see HTTP requests, Rails messages, etc. Is there something else I can try to figure this out? I'm new to rsyslogd, so I could easily be missing something.

    Read the article

  • Teredo - how to connect to host behind NAT?

    - by Signum
    All I want to achieve is to establish connection to my simple server (written in C# using TcpListener class, if it makes any difference), on my computer which is behind NAT. It has some IPv6 address (it's public IP, starting with 2001:0) on Teredo interface. However, I cannot even ping it from outside my network, for instance I'm trying to ping this address from this website http://mebsd.com/ipv6-ping-and-traceroute, result - 100% packet loss. As I understood from reading about Teredo, there is no need for some port forwarding? So where could be the problem?

    Read the article

  • PuTTY/SSH: How to Prevent Auto-Logout?

    - by feklee
    My ISP's SSH server (Debian 2.0) logs me out after 35 minutes of inactivity, when connected with PuTTY (Windows XP). This is a big problem when I utilize the server for port-forwarding. The final messages displayed in the terminal: This terminal has been idle 30 minutes. If it remains idle for 5 more minutes it will be logged out by the system. Logged out by the system. PuTTY options that do not help: Sending of null packets to keep session active. Seconds between keepalives (0 to turn off): 30 [x] Enable TCP keepalives (SO_KEEPALIVE option) Any idea how to avoid the auto-log-out? Should I try another SSH client?

    Read the article

  • mod_proxy failing as forward proxy in simple configuration

    - by Stabledog
    (On Mac OS X 10.6, Apache 2.2.11) Following the oft-repeated googled advice, I've set up mod_proxy on my Mac to act as a forward proxy for http requests. My httpd.conf contains this: <IfModule mod_proxy> ProxyRequests On ProxyVia On <Proxy *> Allow from all </Proxy> (Yes, I realize that's not ideal, but I'm behind a firewall trying to figure out why the thing doesn't work at all) So, when I point my browser's proxy settings to the local server (ip_address:80), here's what happens: I browse to http://www.cnn.com I see via sniffer that this is sent to Apache on the Mac Apache responds with its default home page ("It works!" is all this page says) So... Apache is not doing as expected -- it is not forwarding my browser's request out onto the Internet to cnn. Nothing in the logfile indicates an error or problem, and Apache returns a 200 header to the browser. Clearly there is some very basic configuration step I'm not understanding... but what?

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >