Search Results

Search found 10789 results on 432 pages for 'experience'.

Page 262/432 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Testing VSTO Applications?

  - by Matthew Sposato

  I'm developing an Word 2007 VSTO application in VS2008. The part of the application that interacts with VSTO is difficult to test. VSTO objects behave differently than most class libraries. Their state and behaviors depend on how the user is interacting with Word, where they clicked, what's around the insertion point, etc. Mock objects could work in some scenarios, but they don't capture many of the subtleties of the VSTO objects. Anyone have any experience with testing VSTO based application they can share?

  Read the article

• Determing software estimates and tracking past estimates

  - by Casey

  I know that this probably has as many answers as users here on SO, but software estimation always seemed like an esoteric science. Software developers don't have a magic book to refer to as exist in many other industries. I've been spending the last couple of days working on putting together some estimates for a bit of work that I am proposing for a freelance project that I am working on and am having trouble getting it down. I'm not experienced with any real software estimation practices and am trying to go from the gut based on my experience but also trying to be a little loose (not too loose though) on the estimates to leave me a bit of room to work. I read this blog entry http://blogs.popart.com/2007/07/what-scotty-from-star-trek-can-teach-us-about-managing-expectations/ that was linked to from SO and would like to start tracking my estimates at work as well even though I'm not really required to create estimates there. What tools or techniques would you recommend? Also, how much padding do you usually add in to a time estimate?

  Read the article

• Windows Web Server 2008 R2 Server Core local password complexity

  - by Dennis Allen

  How can I disable the local user account password complexity settings on Windows 2008 R2 "Server Core"? I am trying to migrate our windows 2003 web server to windows 2008 R2. I am trying to see if I can use the "Server Core" install, and it has been a very internet search intensive experience. What I can't find out how to do is to find out how to disable password complexity for local user accounts. While our user account generator currently creates nice strong passwords, there was a time when this was not the case and unfortunately forcing the users to change their password is not an option at this time. Any help greatly appreciated. Dennis

  Read the article

• .NET Usercontrols telerik devexpress infragistics ComponentOne: who's best?

  - by petebob796

  I am considering the purchase of some .NET user controls with interest in both WinForms and asp.net. I have trialed in the past devexpress when I needed a hierarchical data grid for a personal project which I was impressed with. Rather than just jump for them I am interested in peoples experience of different products such as: TelerikDev ExpressInfragistics ComponentOne Any Others? I would like peoples opinions on: - Features Set and Number of Controls - Installation and Upgrade - Ease of use - Documentation - Price - License - Development (Updates to controls their side) Also if anyone has any links to review (hopefully side by side) please post them

  Read the article

• Blackberry support for Forms Authentication - ASP.NET MVC app

  - by Derek Mitchell

  I'm writing an ASP.NET MVC application that uses Forms Authentication. The target clients are a variety of mobile web browsers. When I use the BlackBerry 8530 simulator my MVC app authenticates as expected. I can visit pages whose controller methods are decorated with the [Authorize] attribute - no problem - they display and therefore I assume my Forms Authentication is working correctly. Using a physical Windows Mobile device to browse my site, I have the same experience as the BB simulator, the forms authentication works as I would expect. BUT when I try to visit the site using a Blackberry 8900 physical device the Login page keeps on looping back when I click the Login page. The device is not retaining it's "authenticated" status. I added code to verify this and I can see that: Request.IsAuthenticated: False User.Identity.IsAuthenticated: False So my question is what next steps can I take to try and find out why the Blackberry 8900 is losing it's authentication status. Is this cookie related? Anyone have any ideas? Cheers Derek

  Read the article

• Good GUI Design Tool to mock up iPhone & Android applications

  - by Peter Delaney

  I am about to embark on developing a mobile application for both the iPhone and the Android based phone. I have most of my gui mock ups written down on a white board and some in my head. I need to put them down on paper so I can relay my designs to others in my team. I was wondering what the best on-line gui mockup tool I could use? I have a lot of experience with Visio and I truly like it. I want a tool that would be web based so I could collaborate with others on the team. Does anyone have a suggestion for an easy gui mockup tool that I could use?

  Read the article

• How to draw a 3D donut chart in OpenGL?

  - by paulbeesley

  I would like to draw a chart in OpenGL similar to the donut graph at the bottom-right of this example. I have experience with drawing 2D charts such as the main chart in the example but what confuses me about the one I want to draw is the correct type of primitive to use when drawing the 3D chart. I have considered using GL_QUAD_STRIP and GL_POLYGON but neither seem quite right for the task. Where should I begin? I will be using JOGL with Java to draw the chart, if that helps at all. Also, I don't necessarily need to extrude certain slices of the chart as shown in the example.

  Read the article

• DHL WebService with ASP.NET

  - by victorcore

  Hi, I want to use DHL web service for shippment service in asp.net. I googled a lot of but haven't success yet. I was already download a toolkit for DHL and I don't really understand how to use it. I have gateway URL 'https://xmlpitest-ea.dhl.com/XMLShippingServlet' but I dont know how to pass XML response through this url using asp.net. If anyone has an experience with this, please share with me or any tutorial or link that will help me. Any help would be greatly appreciated. You can also download toolkit at here.

  Read the article

• IPv6 multicast addresses: Is the Group ID field effectively 112 bits or 32 bits?

  - by Jeremy Friesner

  Hi all, I'm trying to understand the rules for choosing an IPv6 multicast address Group ID, and the RFC seems somewhat inconsistent. For example, in RFC 2373 section 2.7 this diagram is shown: | 8 | 4 | 4 | 112 bits | +------ -+----+----+---------------------------------------------+ |11111111|flgs|scop| group ID | +--------+----+----+---------------------------------------------+ ... but then in section 2.7.2 it shows this: | 8 | 4 | 4 | 80 bits | 32 bits | +------ -+----+----+---------------------------+-----------------+ |11111111|flgs|scop| reserved must be zero | group ID | +--------+----+----+---------------------------+-----------------+ So my question is, are the upper 80 bits of the Group ID field usable or not? If they are usable, is it only under certain circumstances (e.g. when using non-Ethernet networking technology?) What problems should I expect to experience if I set these bits when multicasting over an Ethernet LAN?

  Read the article

• Optimizations employed by ORM's

  - by Kartoch

  I'm teaching JEE, especially JPA, Spring and Spring MVC. As I have not so much experience in large projects, it is difficult to know what to present to students about optimisation of ORM. At the present time, I present some classic optimisation tricks: prepared statements (most of ORM implicitely uses it by default) first and second-level caches "write first, optimize later" it is possible to switch off ORM and send SQL commands directly to the database for very frequent, specialized and costly requests Is there any other point the community see about other way to optimize ORM ? I'm especially interested by DAO patterns...

  Read the article

• Marshall a list of objects from VB6 to C#

  - by Andrew

  I have a development which requires the passing of objects between a VB6 application and a C# class library. The objects are defined in the C# class library and are used as parameters for methods exposed by other classes in the same library. The objects all contain simple string/numeric properties and so marshaling has been relatively painless. We now have a requirement to pass an object which contains a list of other objects. If I was coding this in VB6 I might have a class containing a collection as a member variable. In C# I might have a class with a List member variable. Is it possible to construct a C# class in such a way that the VB6 application could populate this inner list and marshal it successfully? I don't have a lot of experience here but I would guess Id have to use an array of Object types.

  Read the article

• Client-Side script to upload attachments to the Sharepoint 2007 list

  - by Clone of Anton Makrushin

  Hello. I have no good script-writing experience. So, I have a list created on MOSS 2007 with about 1000 elements and attachments enabled. I need to attach to each list item file (*.jpg) from a local folder. I doesn't have administrator privileges at MOSS server, only contributor rights Here is my script: $web = new-Object system.Net.WebClient $web.Credentials = [System.Net.CredentialCache]::DefaultCredentials $web.Headers.Add("user-agent", "PowerShell Script") $web.UploadFile('http://ruglbsrvsps/IT/Lists/Test1/', 'C:\temp\Attachments\14\Img1.jpg' ) Test1 - target list; Item1, Item2, Item3 - list items, without attachments, created manually When I run script, it returns byte array and does not upload file to the list item. Can you fix my script or advice better solution for my task (attach bulk of files to the MOSS list items, only contributor rights for target Sharepoint 2007 list) Thank you.

  Read the article

• php html flash website design tools for beginner

  - by LikeToCode

  I have 5 years of C#, Perl and SQL programming experience but I've just found a web designer and developer job. I dont know anything about it but need to design a website using PHP, flash and HTML, whatever it is. Can you give me pointers on where to start to learn it all ASAP and start designing the website? I downloaded WAMP and learned to configure it. Other then that I dont know what to do next. They gave me a few pictures to incorporate, but I dont know how :)

  Read the article

• Correct Approach for mastering SAP R3 and ABAP.

  - by karthik

  Hello all, i have been working on sap technology for the last 2.5 years. since there were so many concepts involved technically,i couldn't get a single source where i can learn about everything related to it. Still,i didnt get the confidence of mastering all the technical concepts. v please help me out if you have faced such experience and how u overcome it. suggest some books/methodology you followed which will be helpful. Note:I have already worked in java/j2ee.there i am confidentenough in mastering the concepts.

  Read the article

• callback execution order in jQuery getJSON

  - by lau

  I'm trying to implement a iGoogle like dashboard interface using widgets that get their content from other sites using JSONP calls. The problem is that if the first widget that calls the "$.ajax" takes 8 seconds to get the content back, it seems that the callbacks of the other widgets will only be called after the callback of the first widget gets executed. For the user experience, it would be better if the widgets could be displayed as soon as they get the content back from the remote sites, and not wait for those that were scheduled before to complete. Is there a way I can do that?

  Read the article

• raw h.264 packet capture and playing in VLC

  - by MAC

  Hi, I am capturing packets off the network from a video conference HDX. The video is sent in RTP and is encoded in H264. I am trying to capture these packets and generate a video file. I wrote raw H264 data from the packets to disk and i am trying to play it in VLC. VLC just shows a green box. Am i being too naive in my approach with data writing or should am I wrong in assuming that VLC should play this file? Anyone have any experience in such things?

  Read the article

• Best approach for GPGPU/CUDA/OpenCL in Java?

  - by Frederik

  General-purpose computing on graphics processing units (GPGPU) is a very attractive concept to harness the power of the GPU for any kind of computing. I'd love to use GPGPU for image processing, particles, and fast geometric operations. Right now, it seems the two contenders in this space are CUDA and OpenCL. I'd like to know: Is OpenCL usable yet from Java on Windows/Mac? What are the libraries ways to interface to OpenCL/CUDA? Is using JNA directly an option? Am I forgetting something? Any real-world experience/examples/war stories are appreciated.

  Read the article

• Does jQuery ajaxSetup({cache: true}) generally work?

  - by fsb

  jQuery 1.4.2 omits the timestamp GET parameter (to defeat browser cacheing) if I assert the ajax cache setting in the local context: $.ajax({ url: searcher, data: keys, cache: true, type: 'GET', dataType: 'json', success: function(data) { // something }); But it includes timestamp if I move the setting out of there and into the global context: $.ajaxSetup({cache: true}); Moreover, if I let the default apply, jQuery sets timestamp, which doesn't seem to match the manual. Do you experience the same? Do HTTP cache control response headers from the server affect this jQuery feature?

  Read the article

• Visual SourceSafe: Architecture/Management

  - by Nic

  I was looking for information on how other people with larger teams manage SourceSafe currently. I was looking for recommendations and advice for a new project I was setting up that will allow for a few key things Scalability Manage multiple overlapping releases Geared more around .NET however allows for legacy applications (VB, ASP and VBS) I am really looking for any lessons learned from other teams. I come from a StarTeam background and we used view labels and release labels to manage multiple overlapping projects. View labels geared more towards compiled code and SQL and the revision labels were used for VB/ASP projects. Thank you for any advice and sharing your experience and frustrations with other companies you might have worked with in the past.

  Read the article

• XML-RPC with PHP and GoDaddy? Confusion sets in.

  - by Chris Cooper

  Hey folks, I am attempting to work with XML-RPC via PHP on a GoDaddy server. This same server is hosting a Wordpress Blog that makes use of XML-RPC and is functioning, though that may be unrelated... Whenever I attempt to use any functions that are integrated into PHP for use with XML-RPC, I get an error (function list here: http://us3.php.net/manual/en/ref.xmlrpc.php) e.g.: Fatal error: Class 'xmlrpc_client' not found Is this because XML-RPC's PHP functions are not enabled on my server? If so, how do I go about enabling those - it would seem I would have to install the XML-RPC library to do so and of course I cannot do that on a shared server. Doesn't Wordpress use the same batch of XML-RPC functions though (it works fine)? I think I have managed to thoroughly confuse myself. I have zero experience with XML-RPC.

  Read the article

• Is there a fully-functional dropdown replacement for HTML SELECT that works in IE?

  - by Ken Paul

  We determined in a previous question that many features of HTML SELECTs are not supported in IE. Is there an alternative widget that you would recommend from your experience that meets the following requirements? Respects the contentEditable property (does not allow selection changes if true) Respects the disabled property of individual OPTIONs (shows them "grayed out" or with strike-through font, and makes them un-selectable) Supports Option Groups (OPTGROUP elements) Supports style options such as border and margin in the SELECT and all sub-elements Supports dynamic add and delete of OPTION and OPTGROUP elements Supports the above in IE version 6 and above EDIT: As noted by @Joel Coehoorn, items 3 and 5 above are currently supported in IE. They are included here to make sure they are not overlooked in a replacement widget.

  Read the article

• Powerpoint Add-In: Add a Button to PPT to SyntaxHighlight a Textbox

  - by Tigraine

  Hi Guys, I am trying to write an Add-In to Powerpoint that does basically one thing: Give users a Button somewhere to click, once they click on it the currently selected TextField should get syntax highlighted. The Syntax highlighting part is easy, I'm just having a real hard time finding some good information on how to successfully interact with Powerpoint from code. There are some MSDN articles highlighting how to add controls on document start or AddSlide, but no good information on how to extend the UI. Has anyone had some experience in this field and could point me to some resource that may help? Also, I am running Powerpoint 2007 while my customer may end up running PPT2003. How is the backwards compatibility of the Add-ins? greetings Daniel

  Read the article

• Al Zimmermann's Son of Darts

  - by polygenelubricants

  There's about 2 months left in Al Zimmermann's Son of Darts programming contest, and I'd like to improve my standing (currently in the 60s) to something more respectable. I'd like to get some ideas from the great community of stackoverflow on how best to approach this problem. The contest problem is known as the Global Postage Stamp Problem in literatures. I don't have much experience with optimization algorithms (I know of hillclimbing and simulated annealing in concept only from college), and in fact the program that I have right now is basically sheer brute force, which of course isn't feasible for the larger search spaces. Here are some papers on the subject: A Postage Stamp Problem (Alter & Barnett, 1980) Algorithms for Computing the h-Range of the Postage Stamp Problem (Mossige, 1981) A Postage Stamp Problem (Lunnon, 1986) Two New Techniques for Computing Extremal h-bases Ak (Challis, 1992) Any hints and suggestions are welcome. Also, feel free to direct me to the proper site if stackoverflow isn't it.

  Read the article

• Client side caching in GWT

  - by Silfverstrom

  We have a gwt-client, which recieves quite a lot of data from our servers. Logically, i want to cache the data on the client side, sparing the server from unnecessary requests. As of today i have let it up to my models to handle the caching of data, which doesn't scale very well. It's also become a problem since different developers in our team develop their own "caching" functionality, which floods the project with duplications. I'm thinking about how one could implement a "single point of entry", that handles all the caching, leaving the models clueless about how the caching is handled. Does anyone have any experience with client side caching in GWT? Is there a standard approach that can be implemented?

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >