Search Results

Search found 11723 results on 469 pages for 'hotkey mode'.

Page 262/469 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• ssh login successful, but scp password gives me "Permission denied"

  - by YANewb

  I'm trying to get some blogging software up on an organizational remote server. I tried to set up a SSH Key but was having problems and decided that getting the blog up and running was more important than dealing with the SSH Key issue, so I ssh-keygen -R remoteserver.com. Now I can successfully login with ssh -v [email protected] and the correct password. Once logged in I can move around and read any file and directory that I should be able to read. But when I try to edit an existing -rw-r--r-- file with VIM, it shows up as read-only, if I try to edit permissions I get chmod: file.ext: Operation not permitted, and if I try to scp a new file from my local machine I'm prompted for the remote user's password, and then get scp: /home/path/to/file.ext: Permission denied. Since I didn't have any of these problems before I tried to set up the ssh key, I suspect these anomalies are a side effect of that, but I don't know how to troubleshoot this. So what does a foolish server-newb, such as myself, need to do to get edit capability back as a remote user? Addendum 1: My userids are different between my local machine and the remote server. For ssh I ssh -v [email protected]. if I whoami I get remoteuser For scp I scp file.ext [email protected]:/path/to/file.ext from the local directory with file.ext while logged in as the local user. if I whoami I get localuser The ls -l for two different files I've tried scp: -rw-r--r--@ 1 localuser localgroup 20 Feb 11 21:03 phpinfo.php -rw-r--r-- 1 root localgroup 4 Feb 11 22:32 test.txt The ls -l for the file I've tried to VIM: -rw-r--r-- 1 remoteuser remotegroup 76 Jul 27 2009 info.txt Addendum 2: In the past I've set up ssh-keys for git repositories. I don't want to completely destroy them, so in an attempt to follow a deer's train of thinking I renamed my ~/.ssh/ to ~/.ssh-bak/, then tested the different types of access. The abridged version of the terminal commands and results is below; I think everything is working until the 8th line from the end. localcomputer:~ localuser$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY The authenticity of host 'remoteserver.com (###.###.###.###)' can't be established. RSA key fingerprint is ##:##:##:##:##:##:##:##:##:##:##:##:##:##:##:##. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'remoteserver.com,###.###.###.###' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Last login: Sun Feb 12 18:00:54 2012 from 68.69.164.123 FreeBSD 6.4-RELEASE-p8 (VKERN) #1 r101746: Mon Aug 30 10:34:40 MDT 2010 [remoteuser@remoteserver /home]$ ls -l total ### -rw-r--r-- 1 remoteuser remotegroup 76 Aug 12 2009 info.txt [remoteuser@remoteserver /home]$ vim info.txt ~ {at the bottom of the VIM screen it tells me it's [read only]} [remoteuser@remoteserver /home]$ whoami remoteuser [remoteuser@remoteserver /home]$ logout debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to remoteserver.com closed. Transferred: sent 3872, received 12496 bytes, in 107.4 seconds Bytes per second: sent 36.1, received 116.4 debug1: Exit status 0 localcomputer:localdirectory name$ scp -v phpinfo.php [email protected]:/home/www/remotedirectory/phpinfo.php Executing: program /usr/bin/ssh host remoteserver.com, user remoteuser, command scp -v -t /home/www/remotedirectory/phpinfo.php OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'remoteserver.com' is known and matches the RSA host key. debug1: Found key in /Users/localuser/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending command: scp -v -t /home/www/remotedirectory/phpinfo.php Sending file modes: C0644 20 phpinfo.php Sink: C0644 20 phpinfo.php scp: /home/www/remotedirectory/phpinfo.php: Permission denied debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK Transferred: sent 1456, received 2160 bytes, in 0.6 seconds Bytes per second: sent 2322.3, received 3445.1 debug1: Exit status 1

  Read the article

• Setting up an Active-Active IIS Cluster with ARR - is it possible?

  - by Ahmed Zubair

  I would like to know if we can setup an Active-Active IIS Cluster using Windows Cluster services that shares a common storage to store web content and WITHOUT the use of Windows NLB. I'm aware that this may not be a best practice or not a recommended setup, however, the setup is to be configured as below: Two web servers running IIS 7.5 (needs a common storage for web content) for HA and another set of two servers for sql cluster in active-passive mode for HA. Also is it possible to enable ARR on 2 node active-active IIS cluster for load balancing http requests? Appreciate if someone replies with both pros & cons of the setup.

  Read the article

• Disable thumbnails in Windows XP?

  - by quack quixote

  I regularly use Windows Explorer to browse my drives and data, and I notice little freezes and hiccups at times. It's especially noticable when browsing local or network folders with lots of video files (AVI, MKV, MPG, etc). I almost always browse in Details view, and the "Do not cache thumbnails" option is turned on. Even though I'm in "Details" mode, I'm convinced the sluggishness is due to Windows trying to generate thumbnails for the video files, so I want to disable thumbnail generation for these files. I occasionally use Thumbnails view for browsing image files, so I don't want to disable all thumbnails. But for future reference, this might be good to know. So I have three questions about disabling Windows thumbnail generation: How do I disable thumbnail generation for all non-image files? How do I disable thumbnail generation for all files? How do I disable thumbnail generation for one specific filetype? And finally, how do I undo (re-enable thumbnails) once I've performed one of the above?

  Read the article

• Sysprep on Windows 7 for a non-windows admin?

  - by askvictor

  I'm needing to use sysprep to deploy some Windows 7 machines. I can't find any resources that explain this very easily. In particular, I've loaded all of the programs I want for the image onto a computer. If I want to use prepares this for cloning onto 200 other machines, what steps would I need to take? Or do I need to start again, creating the image using 'audit' mode? The machines I'm using come pre-configured from the manufacturer with a host of custom drivers that wouldn't be fun to re-install - I'd rather use their base image to build upon. Cheers, Victor

  Read the article

• Where Catalyst stores applist for switchable graphics?

  - by noober

  I cannot add an app to the list to manually set it to high performance (Radeon instead of Intel HD). When I browse for an exe, nothing happens, the list is still empty. So, maybe I can edit some .cfg or .ini? UPDATE This is NOT my screenshot... actually I've found it on the Net. The list with iexplore.exe is what I meant. When I click 'Browse' and choose any exe (Portal2.exe, for instance) nothing happens. The list is empty, so I cannot set mode for Portal2.exe.

  Read the article

• How to input 64-bit hex values in octave

  - by Chris Ashton

  I'm trying to use Octave as a programmer's calculator. I want to input a 64-bit pointer, but when I do apparently the 64-bit value gets silently truncated to 32-bit: octave:44> base_ptr=0x1010101020202020 base_ptr = 538976288 octave:45> uint64(base_ptr) ans = 538976288 octave:46> printf("%lx\n", base_ptr) 20202020 So it seems like it's truncated the input value to the low 32-bits. I would use scanf, but the docs say it should only be used internally. How can I input the full 64-bit value? Alternately, is there some awesome free programmer's calculator out there for Windows? (I know Windows calculator has a programmer's mode but I would like arbitrary variable support). I tried using my ti-89 but it also doesn't support 64-bit hex.

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• Physically moving a hard drive from older iMac (c2d) to new iMac (i7) ?

  - by Inshim

  Instead of my usual habit of using superduper to mirror my drive to a new computer, I just physically moved the hard drive from an older iMac to a new one. But... it now doesn't boot, getting stuck at the apple logo screen. Since the hard drive that came with the new iMac works well, and my old drive works well when I return it to the older iMac, I conclude that there is some problem at the system/kernel level due to the different hardware. In the past I did similar things (e.g. starting a C2D machine from a Core Duo in target disk mode), so perhaps the change in architecture to the i5/i7 is too problematic? The main point: do you know of any way to get the system to rebuild for itself the proper versions of the system components when booting? Are there certain directories that I can safely delete to make that happen? Thanks

  Read the article

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• dhclient configures /etc/resolv.conf with invalid entry

  - by kubal5003

  I'm trying to figure out why running dhclient on my interface sets /etc/resolv conf to the ip number of my gateway(router). This entry is invalid and each and every time causes inability to resolve any address. I would like to: stop dhclient from overwriting the /etc/resolv.conf or make dhclient write there the valid dns ip from my router More on the environment: I'm using virtual Debian Wheezy as a client system on Windows Seven x64. It is run by Virtualbox with networking mode set to bridged (all packets from debian are injected to my network interface on windows). If I manually configure the /etc/resolv.conf then everything works fine. Doing this on every boot is quite annoying.. PS I know I can write a script to do it for me, but this is not the solution I want. //edit router ip: 192.168.1.100 /etc/resolv.conf AFTER running dhclient eth0: "nameserver 192.168.1.100" what I would like the /etc/resolv.conf to look like: "nameserver 89.202.xxxx" (I don't have to provide the real ip do I? )

  Read the article

• idle proccesses and high memory bad? uwsgi/django

  - by JimJimThe3rd

  I have a VPS with 256MB of ram. I'm running nginx, uwsgi and postgresql on Ubuntu 12.04 for a soon to be Django site. About 200MB of ram are being used despite the website not being active, the uwsgi processes seem to just be idling. Is this bad? I once heard that having a bunch of free memory isn't necessarily a good metric because it is possible that the memory in use can easily be freed up. I mean, it is possible that the server is storing commonly used "stuff" in case it is accessed but is more than happy to dump it if the ram is needed. But I'm really not sure, hence me asking this question. If it is bad I could set some of the application loading options for uwsgi like "cheap" or "idle" mode. Screenshot of my htop

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• how to fix asyncmac.sys infection

  - by Jay

  AVG anti-virus tells me that there is a virus in my asyncmac.sys. I tried to overwrite it with a copy of asyncmac.sys from another computer (making sure that it was the same version of Windows XP, but I was still nervous that I was going to break something), but when I reboot, I get the same virus warning. If I try to delete the file Windows (or somebody) automatically and immediately puts it back. I get a blue-screen death if I try to boot in safe mode. I tried to do a system restore to before I had the virus, but it tells me that it can't restore because nothing has changed. Any suggestions on how to fix this?

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• email spam filering in bridging

  - by User4283

  I've a mail server, which handle multiple domains. Due to concern of spam and mail server performance. I've configured another machine which will be in bridging and mail server would be behind that it. How can i filter spam emails in bridging server without running any smtp services. Scenario Internet +------+ Spamfilter Server (in bridging mode) +---------+ MailServer SmartHost will work for outgoing email. In this scenario i can filter all incoming emails. There is also another option of DNS which i don't want to use.

  Read the article

• Set up proxy for vpn server on ubuntu server 12.4

  - by Morteza Soltanabadiyan

  I have a vpn server with HTTPS, L2TP, OPENVPN, and PPTP. I want to set up a proxy on the server, so all connection that comes from vpn clients, they will use that. I created the following bash script file for it, but the proxy isn't working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 What to do to make a global proxy for server and all vpn clients to use it automatically?

  Read the article

• SolidWorks ratio issue with printing in landscape

  - by jamiemmp

  We run SolidWorks 2010 on XP. On one workstation when printing to the plotter in a 1:1 ratio in landscape mode it's off by small increments. He needs to adjust manually from 1:1 to 1:1.009 (for example) in order to correctly print 1:1. The increments by which it's off varies from drawing to drawing. None of the other workstations have this issue. All five of the workstations have the same settings and all print to one networked plotter. Three out of five have the same graphics card. Scale to fit is not checked. I read this site often, but this is the first time I've posted. I'm hoping someone here has run across this before. Thanks.

  Read the article

• TIME column in TOP command for mysql

  - by michael

  When I run top on my database server I get that mysqld has been running for 4:00.51 and it continues to go up. I assume this means that one process with mysql has been running this long from other posts on here. Its not set to cumulative mode as best I can tell as the heading looks like it would change to CTIME if that be the case. What I'm wondering is if this is normal for a site that makes a lot of individual connections using PHP. I shouldn't have any long running processes that would hold on to a mysql connection for this long, only seconds at most. Am I incorrect to assume that this time relates to one connection/process running? I think usually I see it flash up and away on the TOP, not just stay there with this number increasing.

  Read the article

• My saved drafts become unread email in Windows Live Mail and Gmail IMAP

  - by Valamas

  I have setup windows live mail with my gmail account in IMAP mode. When I draft an email and save it. It saves in the drafts automatically. Within a minute, my WLM sound alerts new mail and shows mail icon in the system tray. However, this is for the draft I have saved which appears unread. To make the mail notification icon go away in the system tray, I go off and mark the draft as read. This repetition is tedious and distracting. How can I avoid this annoyance? thanks

  Read the article

• Windows XP Pro SP3 stop error code 0x000000F4

  - by Andrew Ford

  I have a system running Windows XP Pro SP3. My wife is the primary user of this system, and the last several days in a row, when she tries to log in to the system it gives her a BSOD with the stop error code 0x000000F4. The rest of the error codes change every time she tries to log on, but that one seems to stay constant. The error it gives me is: A process or thread crucial to system operation has unexpectedly exited or been terminated. The machine will also get stuck in a boot loop, where it keeps giving me the screen saying that windows did not start successfully, and to choose how to start windows. I have tried Safe Mode, Last known Good Config, and Normally, and all have resulted in either a return to the boot loop, or BSOD. What might this mean? How can I fix it, without doing a clean install?

  Read the article

• CURL on PHP 5.2 works in CLI but not in IIS

  - by Ben Reisner

  I have a Windows 2003 Server running IIS with php 5.2.8, I'm trying to use CURL, and it works in CLI mode (if i execute php.exe) but it does not seem to be registered when running under IIS. The output of PHP info in both CLI and IIS show the same 'Loaded Configuration File', but under IIS it does not give the CURL info box. c:\program files\php\php.exe -i shows ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... curl cURL support => enabled cURL Information => libcurl/7.16.0 OpenSSL/0.9.8i zlib/1.2.3 phpinfo() ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... NOTE: This server also runs php 5.3 in c:\program files\php-5.3.0 and CURL does properly work with that installation.

  Read the article

• Problem launch Java on Debian: "error while loading shared libraries: libjli.so"

  - by aetaur

  I'm trying to launch Java: $ java -version java: error while loading shared libraries: libjli.so: cannot open shared object file: No such file or directory $ ldd /usr/lib/jvm/java-6-openjdk/jre/bin/java linux-gate.so.1 => (0xb779f000) libz.so.1 => /usr/lib/libz.so.1 (0xb7780000) libpthread.so.0 => /lib/i686/cmov/libpthread.so.0 (0xb7767000) libjli.so => /usr/lib/jvm/java-6-openjdk/jre/bin/../lib/i386/jli/libjli.so (0xb7762000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb775e000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7603000) /lib/ld-linux.so.2 (0xb77a0000 $ ls /usr/lib/jvm/java-6-openjdk/jre/bin/../lib/i386/jli/ libjli.so However Java does work under root: $ sudo java -version java version "1.6.0_18" OpenJDK Runtime Environment (IcedTea6 1.8.7) (6b18-1.8.7-2~lenny1) OpenJDK Client VM (build 14.0-b16, mixed mode, sharing) How can I launch Java as a regular user without errors?

  Read the article

• Need help diagnosing cause of BSOD

  - by n00neimp0rtant

  I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• task scheduler won't wake the computer

  - by valya

  I want my computer to start uTorrent at 4 o'clock in the morning, when I'm asleep. But the computer is a bit noisy so I put it to sleep mode every time I go to bed. I've tried creating a task in Task Scheduler with this parameters: Run whether user is logged in or not Daily At 4:00 every day Start a program "C:\Program Files\uTorrent\uTorrent.exe" Wake the computer to run this task I've tried to change the time to run to make sure the computer wakes up and runs uTorrent. But it doesn't. What am I doing wrong? Maybe I've lost something?

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >