Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 262/522 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Ubuntu Server on Proliant ML350 G4

  - by eduardoavdr

  Hi Everyone, I have been given the task to change OS of a HP Proliant ML350 G4 server, and I decided to use Ubuntu server edition for that matter. The thing is that the server has already installed Windows server 2000 on the only Hard drive it has (SCSI). My question is, could I install an IDE HD on the IDE connection it has and install ubuntu without overwritting the boot configuration, so if I wanted to go back to the windows 2000 server installation with no problems? It also has a tape drive which is used for backups. Do you guys know how buntu deals with such devices? Thanks for your time

  Read the article

• What are the implications of expanding an internal subnet mask?

  - by Philip

  Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

  Read the article

• Grub install fails while installing Ubuntu on RAID

  - by Warren Pena

  I'm trying to install Ubuntu 9.10 using the alternate install CD, but I keep getting stuck. I get through the first few steps of the install process easily enough (telling it what partition to install to, what user ID and password to create, time zone, etc.), but then it suddenly pops up a menu asking me what the next step in the install process is. It has "Install the GRUB boot loader on a hard disk" selected by default. When I select it, it goes to another screen with a progress bar and a label "Installing the 'grub2' package." The progress bar gets to 16%, and then I get returned to the same menu. No matter how many times I try to install grub, the exact same thing happens. I'm trying to install Ubuntu on a two disk RAID-1 array. This is the RAID card I'm using: http://www.siig.com/ViewProduct.aspx?pn=SC-SAER12-S2. Any ideas what may be causing this to happen and how I can fix it? Thanks!

  Read the article

• VPN networking issue

  - by DuncanDavies

  I have 2 servers hosted in the cloud. One an application server, one a VPN server, both running Win2008. Both have a local IP address assigned by DHCP in different network subnets, 10.227.55.0 (VPN) and 10.231.5.0 (App Server). These servers can ping each other. My VPN client connects in to the VPN server (using a L2TP connection on a Win7 client). It is assigned an IP Address from the VPN server's static pool (the VPN server takes 192.168.100.1, the client is given 192.168.100.2). The client can ping both the 192.168.100.1 address of the VPN server, and its 'local' IP address (10.227.55.X). What the client can't do is ping the App Server. How can I configure routing so that my client can access the App Server, without hard-coding any of the DHCP IP addresses anywhere? thanks Duncan

  Read the article

• Lenovo DVD Drive Disabled After Windows 7 Install

  - by David Lacher

  Upgraded hard drive in Lenovo T61P; decided to start fresh with Windows 7 Pro. Windows installed, so DVD drive was working. All of a sudden, driver is not recognized. Device is "HL-DT-ST DVDRAM GSA-U10N ATA Device". It appears on device manager but with the yellow tag; have tried uninstalling, searching for drivers, everything I can think of. Cannot even start over with Windows 7 installation disk because disk spins but then stops and My Computer does not recognize the drive. Help please. thank you. David Lacher

  Read the article

• Setting up dovecot on OpenBSD

  - by Jonas Byström

  I'm a *nix n00b that just installed dovecot (the selection with no ldap, mysql or pgsql) on OpenBSD 4.0 and I want to set it up for imap use, but I'm having a hard time finding documentation that I can understand. It currently running on port 143 (checked with telnet) but from there I need to do the following: I need some accounts, the once already on the system are fine if I can get those running (seemed to be some dovecot option somehow?), or just adding a few manually is ok too. Was there some setting for this in the default /etc/dovecot.conf? passdb bsdauth {} is uncommented by default... I need to create imap folders, or subfolders. How can I do that? Hopefully not, but anything else I need to do? I want to run without certification validation and no SSL/TLS, would this work by default (client-side settings)?

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Move some iTunes library items to different drive?

  - by Sören Kuklau

  My internal hard drive is somewhat small, and I only regularly listen to a fraction of my iTunes library anyway, so I'd like to keep large portions on it on an external drive for archival purposes. Since dealing with multiple iTunes libraries is somewhat painful, the solution I'm looking for is to move individual items of the library to a different location, without compromising the "Keep organized" and "Copy files" settings. I found an AppleScript that I assume is supposed to do this, Move Files To Folder…, but it instead copies them, and doesn't update the library accordingly. I can do this manually by moving the file, then accessing it in iTunes — it'll prompt me for the new location. I just don't intend to do this one by one for thousands of files.

  Read the article

• Windows 7 won't load unless other harddrives "disconnect"ed in UEFI shell

  - by lmz

  I have three disks, one GPT partitioned containing Windows 7 and Debian, the other MBR partitioned containing CentOS, and the other one MBR partitioned, empty. It used to work (loading Windows boot manager using rEFIt) but now after installing CentOS and OpenIndiana on the second drive, Windows won't boot. The logo is displayed briefly and then a text mode scrollbar "Loading files", then back to the rEFIt menu. The only thing that makes it work is if I drop into the UEFI shell and run disconnect XX where XX is the device handle of the other hard drives (obtained from running devices). This makes me think that the bootloader is getting confused about where the Windows partition is. Is there any information on how the Windows UEFI boot loader finds the Windows partition, or is there any logging I can turn on to help troubleshoot this issue?

  Read the article

• Issues with Rsync on a NAS

  - by Daniel Fischer

  I'm trying to rsync a few external hard drives over to my new Nas DS412+ but I'm noticing it's stupid slow. I'm trying it via mounting the backup folder via afb on a Mac. I was told this may be the wrong way to do it. I recently just turned on "network backup" on the Synology and am now running rsync over ssh like: rsync -ar --progress . admin@localip:/backup/path Is this the right way to do it now? Will it be faster? Is there something else I can do to make it faster? Edit: I'm getting a ton of: "failed to set permissions" "failed to set times" now that I run it. What do I do?

  Read the article

• MySQL open files limit

  - by Brian

  This question is similar to set open_files_limit, but there was no good answer. I need to increase my table_open_cache, but first I need to increase the open_files_limit. I set the option in /etc/mysql/my.cnf: open-files-limit = 8192 This worked fine in my previous install (Ubuntu 8.04), but now in Ubuntu 10.04, when I start the server up, open_files_limit is reported to be 1710. That seems like a pretty random number for the limit to be clipped to. Anyway, I tried getting around it by adding a line like this in /etc/security/limits.conf: mysql hard nofile 8192 I also tried adding this to the pre-start script in mysql's upstart config (/etc/init/mysql.conf): ulimit -n 8192 Obviously neither of those things worked. So where is the hoop that has been added between Ubuntu 8.04 and 10.04 through which I must jump in order to actually increase the open files limit?

  Read the article

• Windows XP won't boot after drive transplant

  - by Nathan

  Hi all, I moved my hard drive from my Lenovo laptop into my Asus Eee PC netbook. When I started the netbook, after POST all I got was a black screen with a cursor in the upper left corner. I thought that the migration should work OK because this was a 32-bit version of Windows XP, and the Atom processor in the Asus should support the x86 instruction set. However, I don't know much about Windows, so maybe this was a dumb thought. I did verify that the BIOS can find the drive. It required major surgery to replace the drive, so any solution requiring me to remove the transplant drive is not going to fly. Keeping in mind that the netbook has no optical drive and that I have no other Windows computers (all my other computers run Linux), is there any way I can fix this problem? Thanks! Nathan

  Read the article

• SAN typical MTBF

  - by Adrian K

  We're using a SAN on a project at work, and there's a bit of debate around the fact that's technically it's a Single Point of Failure. No one seems to have any hard data. The SAN in question is a single physical box, but with internal redundant components (sorry - not sure3 what level of RAID it has, but I can find out). What's the tyopical MTBF for a SAN? The PM has it down on the projects risk register as "Quite Common' - I've never heard of a SAN going down, but I don't jhave any stats to show how likely it really is. Does anyone have any helpful info?

  Read the article

• Disabling partition just for one OS on multi-boot system

  - by Emiswelt

  Hi Regarding to the solution there: http://serverfault.com/questions/36385/how-can-i-mount-a-hard-drive-as-read-only-on-windows-xp I have a system with three partitions. One runs windows 7, one runs windows XP and is for some experimental programming and testing. I don't want to mess up anything, so I am going to disable the windows 7 partition like described on the linked page above from windows XP to protect the operating system. When I do this, is the windows 7 partition only disabled for the running XP os, or is the windows 7 partition rendered unbootable? with best regards

  Read the article

• Install OS X 10.5 on Intel 1GB Macbook

  - by Moshe

  I'm trying to install Mac OS X 10.5 on a MacBook that previously had 10.4 on it. i am getting an error after selecting the language. What could be causing a box on the screen that says: Mac OS X cannot be installed on this computer. It's an Intel MacBook with 1GB of DDR2 memory. 80GB hard drive. It has been formatted now, so there's no going back. According to the System Profiler on the 10.5 boot CD, the MacBook is version MacBook2,1. Thanks!

  Read the article

• New installation - Win 7 or directly Win 8?

  - by Horst Walter

  My laptop's hard disk is gone, so I need to re-install my Windows. Would it be a good idea to directly install Win8 (so actually the preview). Is there any known incompatibility with Win7 which would be a show stopper? I have a Dell XPS laptop, I do not expect any driver issues since the series is pretty much mainstream. Would the Win8 preview become Win8 RTM automatically by updates, or would I need to re-install Win8 RTM. This would be the no-go for me. The Win8 preview does not require a key, so I guess it becomes Win 8 RTM and then needs to be activated (which is what I want). Basically the idea is, I have to install windows anyway, so why not using the latest version?

  Read the article

• Content server backups

  - by Dan Sosedoff

  What is the best way to backup data on content servers? For example, I have 15 servers that just have content, no applications running on it. Each server has a 250 GB hard drive. So, it's a pretty big amount of data. All the data have external access (via HTTP). So, the question is: what methodology is best in my case? The most useful method I know is cross-backup: when each server contains its own data and backup of one other server. But, there is significant reduction in total capacity. RAID?

  Read the article

• Speaker static event fires with every action

  - by P.Brian.Mackey

  When I... click my mouse (everytime) stroke a key on keyboard (sometimes) Watch a video (horrible) Take the hard drive out for a walk (bad) The Cyber Acoustics CA-2014rb speakers chime in with an onomatopoeia. Sounds like radio interference. A click for every platter revolution. A chime for every 80Kb of data. This is a virus type Pokémon immune to formats, OS upgrades and everything but volume control, power outages and deep submersions. How can I defeat the monster rattling in my PC?

  Read the article

• Grub2 fails to chainload Windows 7 with error "invalid signature"

  - by atomicpirate

  I've built a new UEFI 64-bit system with both Windows 7 and Ubuntu 11.10 installed (on separate hard drives). I'd like to be able to boot Windows 7 from the grub menu, but I have so far been unsuccessful in getting grub to chainload it. After getting the grub menu, I choose the option for the command line and I can see that bootmgfw.efi is at (hd1,gpt1)/efi/Microsoft/Boot/bootmgfw.efi. However, when I attempt to chainload I get an error: grub> chainloader (hd1,gpt1)/efi/Microsoft/Boot/bootmgfw.efi error: invalid signature I am not sure whether I chose the UEFI boot option when I installed Linux from the LiveCD, and so I am wondering if the grub I have is perhaps unable to chainload in this manner? In any case I am not sure how to get the chainload to work.

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• Recovering portion(s) of file with CRC (cyclic redundancy check) errors in Robocopy

  - by Mark A

  Is it possible to recover portions of files with CRC errors? If so, how? I have a partially damaged hard drive (2.5" SATA) that I have partially recovered using Spinrite 6.0 (took 2 weeks to run!). I have been successful in getting many of the files off of the drive using Robocopy . /V /S /E /COPY:DAT /R:1 /W:0, but some of the files get to +/- 90% in Robocopy and then fail with a CRC Data Error (cyclic redundancy check). I am wondering if it is possible to recover the first 90% of the file and try to recover it in a text editor. 1.0% ... 91.0% 91.1% 2010/06/14 18:21:13 ERROR 23 (0x00000017) Copying File F:\Documents and Settings\user\Local Settings\Application Data\Identities\{GUID}\Microsoft\Outlook Express\Mailbox Folder.dbx Data error (cyclic redundancy check). Thanks in advance!

  Read the article

• Create a Windows Image for Deployment

  - by Kiranu

  In my company we have 8 laptops that we use to deploy on the field. These machines get assigned to a user for a certain time and run Windows Vista. All the machines are the same model. After the machine is returned, it is company policy to completely format the machine and go back to a predetermined configuration. Right now, what we do is we use the recovery utility in the laptop (we are a small shop so we use the OEM Windows license that the laptops come with) and manually uninstall and change the configuration in order to bring it to our baseline config. I know that there are ways to create an image that gets copied to the hard drive with a specific configuration and with specific software installed (thats what OEMs do right?). I'm looking for a tool or a tutorial or something that explains as simply as possible how to create such an image. Thanks a lot

  Read the article

• Gigabyte GA-P55A-UD4P won't boot from USB drive with RAID enabled

  - by Daniel Schaffer

  I've got a Windows 7 installation image on my USB hard drive, which is set up to be bootable. I know it works because I've used it on several computers, and it works on the computer I'm trying to install as long as the RAID controller is disabled. However, when I enable the RAID controller and attempt to boot from the USB driver, it hangs for 30-60 seconds and then gives me the "disk boot failure, insert system disk" error like it can't find any OS. Just for laughs, I disabled the RAID controller again and it booted fine. I'm having separate, unrelated issues burning a dvd with the ISO, so I would prefer to get this working.

  Read the article

• Motherboard on, but nothing will start

  - by Geeklat

  I'll try and be as clear as possible. Recently I purchased a barebones kit for my first attempt at a full PC assembly. I've gone through and connected all the parts correctly based on numerous examples that confirm everything is connected correctly. The motherboard and the video card are receiving power based on the fact that the motherboard's power LED is on and the video card has some LEDs on. Nothing else in the computer will come on when pressing the power button on the case. No fans, no hard drive, no CPU fan. Not even for a split second. I also receive no beeping noise from the speaker connected to the motherboard. I've also tried swapping the reset and power connectors from the front of the case to no luck.

  Read the article

• Cannot run setups from a mapped network drive on Windows 7

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. The same action did work on Windows 2000, Windows XP and Windows Vista. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior?

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >