Search Results

Search found 7702 results on 309 pages for 'nested includes'.

Page 264/309 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

  • Is there a way to route all traffic from Android through a proxy/tunnel to my Tomato router?

    - by endolith
    I'd like to be able to connect my Android phone to public Wi-Fi points with unencrypted connections, but People can see what I'm doing by intercepting my radio transmissions People who own the access point can see what I'm doing. There are tools like WeFi and probably others to automatically connect to access points, but I don't trust random APs. I'd like all my traffic to go through an encrypted tunnel to my home router, and from there out to the Internet. I've done such tunnels from other computers with SSH/SOCKS and PPTP before. Is there any way to do this with Android? I've asked the same question on Force Close, so I'll change this question to be about both sides of the tunnel. More specifically: My phone now has CyanogenMod 4.2.3 My router currently has Tomato Version 1.25 I'm willing to change the router firmware, but I was having issues with DD-WRT disconnecting, which is why I'm using Tomato. Some possible solutions: SSH with dynamic SOCKS proxy: Android supposedly supports this through ConnectBot, but I don't know how to get it to route all traffic. Tomato supports this natively. I've been using this with MyEntunnel for my web browsing at work. Requires setting up each app to go through the proxy, though. PPTP: Android supports this natively. Tomato does not support this, unless you get the jyavenard mod and compile it? I previously used PPTP for web browsing at work and in China because it's native in Windows and DD-WRT. After a while I started having problems with it, then I started having problems with DD-WRT, so I switched to the SSH tunnel instead. Also it supposedly has security flaws, but I don't understand how big of a problem it is. IPSec L2TP: Android (phone) and Windows (work/China) both support this natively I don't know of a router that does. I could run it on my computer using openswan, but then there are two points of failure. OpenVPN: CyanogenMod apparently includes this, and now has an entry to create a new OpenVPN in the normal VPN interface, but I have no idea how to configure it. TunnelDroid apparently handles some of this. Future versions will have native support in the VPN settings? Tomato does not support this, but there are mods that do? I don't know how to configure this, either. TomatoVPN roadkill mod SgtPepperKSU mod Thor mod I could also run a VPN server on my desktop, I guess, though that's less reliable and presumably slower than running it in the router itself. I could change the router firmware, but I'm wary of more fundamental things breaking. Tomato has been problem-free for the regular stuff. Related: Anyone set up a SSH tunnel to their (rooted) G1 for browsing?

    Read the article

  • multiple puppet masters

    - by Oli
    I would like to set up an additional puppet master but have the CA server handled by only 1 puppet master. I have set this up as per the documentation here: http://docs.puppetlabs.com/guides/scaling_multiple_masters.html I have configured my second puppet master as follows: [main] ... ca = false ca_server = puppet-master1.test.net I am using passenger so I am a bit confused how the virtual-host.conf file should look for my second puppet-master2.test.net. Here is mine (updated as per Shane Maddens answer): LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby Listen 8140 <VirtualHost *:8140> ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP SSLCertificateFile /var/lib/puppet/ssl/certs/puppet-master2.test.net.pem SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/puppet-master2.test.net.pem #SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem #SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem # If Apache complains about invalid signatures on the CRL, you can try disabling # CRL checking by commenting the next line, but this is not recommended. #SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem SSLVerifyClient optional SSLVerifyDepth 1 # The `ExportCertData` option is needed for agent certificate expiration warnings SSLOptions +StdEnvVars +ExportCertData # This header needs to be set if using a loadbalancer or proxy RequestHeader unset X-Forwarded-For RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have commented out the #SSLCertificateChainFile, #SSLCACertificateFile & #SSLCARevocationFile - this is not a CA server so not sure I need this. How would I get passenger to work with these? I would like to use ProxyPassMatch which I have configured as per the documentation. I don't want to specify a ca server in every puppet.conf file. I am getting this error when trying to get create a cert from a puppet client pointing to the second puppet master server (puppet-master2.test.net): [root@puppet-client2 ~]# puppet agent --test Error: Could not request certificate: Could not intern from s: nested asn1 error Exiting; failed to retrieve certificate and waitforcert is disabled On the puppet client I have this [main] server = puppet-master2.test.net What have I missed? -- update Here is a new virtual host file on my secondary puppet master. Is this correct? I have SSL turned off? LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby # you probably want to tune these settings PassengerHighPerformance on PassengerMaxPoolSize 12 PassengerPoolIdleTime 1500 # PassengerMaxRequests 1000 PassengerStatThrottleRate 120 RackAutoDetect Off RailsAutoDetect Off Listen 8140 <VirtualHost *:8140> SSLEngine off ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 # Obtain Authentication Information from Client Request Headers SetEnvIf X-Client-Verify "(.*)" SSL_CLIENT_VERIFY=$1 SetEnvIf X-SSL-Client-DN "(.*)" SSL_CLIENT_S_DN=$1 DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Cheers, Oli

    Read the article

  • What is the difference between Anycast and GeoDNS / GeoIP wrt HA?

    - by Riyad
    Based on the Wikipedia description of Anycast, it includes both the distribution of a domain-name-to-many-IP-mapping across many DNS servers as well as replying to clients with the most geographically close (or fastest) server. In the context of a globally distributed, highly available site like google.com (or any CDN service with many global edge locations) this sounds like the two key features one would need. DNS services like Amazon's Route53, EasyDNS and DNSMadeEasy all advertise themselves as Anycast-enabled networks. Therefore my assumption is that each of these DNS services transparently offer me those two killer features: multi-IP-to-domain mapping AND routing clients to the closest node. However, each of these services seem to separate out these two functionalities, referring to the 2nd one (routing clients to closest node) as "GeoDNS", "GeoIP" or "Global Traffic Director" and charge extra for the service. If a core tenant of an Anycast-capable system is to already do this, why is this functionality being earmarked as this extra feature? What is this "GeoDNS" feature doing that a standard Anycast DNS service won't do (according to the definition of Anycast from Wikipedia -- I understand what is being advertised, just not why it isn't implied already). I get extra-confused when a DNS service like Route53 that doesn't support this nebulous "GeoDNS" feature lists functionality like: Fast – Using a global anycast network of DNS servers around the world, Route 53 is designed to automatically route your users to the optimal location depending on network conditions. As a result, the service offers low query latency for your end users, as well as low update latency for your DNS record management needs. ... which sounds exactly like what GeoDNS is intended to do, but geographically directing clients is something they explicitly don't support it yet. Ultimately I am looking for the two following features from a DNS provider: Map multiple IP addresses to a single domain name (like google.com, amazon.com, etc. does) Utilize a DNS service that will respond to client requests for that domain with the IP address of the nearest server to the requestee. As mentioned, it seems like this is all part of an "Anycast" DNS service (all of which these services are), but the features and marketing I see from them suggest otherwise, making me think I need to learn a bit more about how DNS works before making a deployment choice. Thanks in advance for any clarifications.

    Read the article

  • Windows Question: RunOnce/Second Boot Issues

    - by Greg
    I am attempting to create a Windows XP SP3 image that will run my application on Second Boot. Here is the intended workflow. 1) Run Image Prep Utility (I wrote) on windows to add my runonce entries and clean a few things up. 2) Reboot to ghost, make image file. 3) Package into my ISO and distribute. 4) System will be imaged by user. 5) On first boot, I have about 5 things that run, one of which includes a driver updater (I wrote) for my own specific devices. 6) One of the entries inside of HKCU/../runonce is a reg file, which adds another key to HKLM/../runonce. This is how second boot is acquired. 7) As a result of the driver updater, user is prompted to reboot. 8) My application is then launched from HKLM/../runonce on second boot. This workflow works perfectly, except for a select few legacy systems that contain devices that cause the add hardware wizard to pop up. When the add hardware wizard pops up is when I begin to see problems. It's important to note, that if I manually inspect the registry after the add hardware wizard pops up, it appears as I would expect, with all the first boot scripts having run, and it's sitting in a state I would correctly expect it to be in for a second boot scenario. The problem comes when I click next on the add hardware wizard, it seems to re-run the single entry I've added, and re-executes the runonce scripts. (only one script now as it's already executed and cleared out the initial entries). This causes my application to open as if it were a second boot, only when next is clicked on the add hardware wizard. If I click cancel, and reboot, then it also works as expected. I don't care as much about other solutions, because I could design a system that doesn't fully rely on Microsoft's registry. I simply can't find any information as to WHY this is happening. I believe this is some type of Microsoft issue that's presenting itself as a result of an overstretched image that's expected to support too many legacy platforms, but any help that can be provided would be appreciated. Thanks,

    Read the article

  • backup and restoration of a freeipa infrastructure

    - by Sirex
    I'm finding the documentation on ipa server backup and restoration sadly lacking, and being so centrally critical it's not something i'm really happy about shooting in the dark with - could some kind soul more knowledable in the matter please attempt to provide an idiot-proof guide to backing up and restoring of IPA server(s) ? Particularly the main server (the cert signing one). ...We're looking towards rolling out ipa in a two server setup (1 master, 1 replica). I'm using dns srv records to handle failover, hence a loss of the replica isn't a big deal as i could make a new one and force a resync to happen - it's losing the master that bothered me. The thing that i'm really struggling with is locating a step-by-step procedure for backing up and restoring the master server. I'm aware that whole-VM snapshot is the recommended way of doing IPA server backup, but that isn't an option at this time for us. I'm also aware that freeipa 3.2.0 includes some sort of backup command build in, but that isn't in the ipa version of centos, and i don't expect it will be for some time yet. I've been trying many different methods, but none of them seem to restore cleanly, amongst others, i've tried; a command similar to db2ldif.pl -D "cn=directory manager" -w - -n userroot -a /root/userroot.ldif the script from here to produce three ldif files -- one for the domain ({domain}-userroot), and two for the ipa server (ipa-ipaca and ipa-userroot): Most of the restores i've tried have been similar to the form of: ldif2db.pl -D "cn=directory manager" -w - -n userroot -i userroot.ldif which seems to work and reports no errors, but totally borks the ipa install on the machine and i can no longer login with either the admin password on the backed up server, or the one i set it to on installation before attempting the ldif2db command (i'm installing ipa-server and running ipa-server-install, then attempting the restore). I'm not overly bothered about losing the CA, having to rejoin the domain, losing replication etc etc (although it'd be awesome if that could be avoided) but in the instance of the main server dropping i'd really like to avoid having to re-enter all the user/group information. I guess in the instance of losing the main server i could promote the other one and replicate in the other direction, but i've not tried that, either. Has anyone done that ? tl;dr: Can someone provide an idiots guide to backing up and restoring an IPA server (preferably on CentOS 6) in a clear enough way that'd make me feel confident it'll actually work when the dreaded time comes ? Crayons are optional, but appreciated ;-) I can't be the only person struggling with this, seeing how widely used IPA is, surely ?

    Read the article

  • getfacl command and Linux file permissions - getting 403 error when accessing Wordpress

    - by tommytwoeyes
    I'm configuring Wordpress for a friend, and I just screwed up the Wordpress directory permissions (I suspect) using setfacl. Webfaction doesn't allow sudo or allow me to change the directory group ownership using chown. Now it appears that something I did is causing the entire application to give me 403 errors when I try to access it. The current directory listing looks like this (I set the whole thing to 777 temporarily to try to recover access to it): drwxrwsr-x+ 6 myusername myusername 4096 Mar 2 07:07 ./ drwxr-xr-x 3 root root 4096 Feb 25 19:48 ../ -rwxrwxr-x+ 1 myusername myusername 286 Mar 2 06:33 gzip.php -rwxrwxr-x+ 1 myusername myusername 4831 Mar 4 20:02 .htaccess -rwxrwxr-x+ 1 myusername myusername 397 Feb 25 19:49 index.php -rw-rw-r--+ 1 myusername myusername 15606 Feb 25 19:49 license.txt -rw-rw-r--+ 1 myusername myusername 9200 Feb 25 19:49 readme.html drwxrwsr-x+ 6 myusername myusername 4096 Feb 25 19:49 .svn/ -rwxrwxr-x+ 1 myusername myusername 4337 Feb 25 19:49 wp-activate.php drwxr-xr-x+ 10 myusername myusername 4096 Mar 4 20:03 wp-admin/ -rwxrwxr-x+ 1 myusername myusername 40283 Feb 25 19:49 wp-app.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-atom.php -rwxrwxr-x+ 1 myusername myusername 274 Feb 25 19:49 wp-blog-header.php -rwxrwxr-x+ 1 myusername myusername 3931 Feb 25 19:49 wp-comments-post.php -rwxrwxr-x+ 1 myusername myusername 244 Feb 25 19:49 wp-commentsrss2.php -rwxrwxr-x+ 1 myusername myusername 3485 Feb 25 20:15 wp-config.php drwxr-xr-x+ 6 myusername myusername 4096 Feb 26 08:52 wp-content/ -rwxrwxr-x+ 1 myusername myusername 1255 Feb 25 19:49 wp-cron.php -rwxrwxr-x+ 1 myusername myusername 246 Feb 25 19:49 wp-feed.php drwxrwxr-x+ 9 myusername myusername 4096 Feb 25 19:49 wp-includes/ -rwxrwxr-x+ 1 myusername myusername 1997 Feb 25 19:49 wp-links-opml.php -rwxrwxr-x+ 1 myusername myusername 2453 Feb 25 19:49 wp-load.php -rwxrwxr-x+ 1 myusername myusername 27787 Feb 25 19:49 wp-login.php -rwxrwxr-x+ 1 myusername myusername 7774 Feb 25 19:49 wp-mail.php -rwxrwxr-x+ 1 myusername myusername 494 Feb 25 19:49 wp-pass.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rdf.php -rwxrwxr-x+ 1 myusername myusername 334 Feb 25 19:49 wp-register.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-rss2.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rss.php -rwxrwxr-x+ 1 myusername myusername 9655 Feb 25 19:49 wp-settings.php -rwxrwxr-x+ 1 myusername myusername 18644 Feb 25 19:49 wp-signup.php -rwxrwxr-x+ 1 myusername myusername 3702 Feb 25 19:49 wp-trackback.php -rwxrwxr-x+ 1 myusername myusername 3210 Feb 25 19:49 xmlrpc.php The getfacl output looks like this: # file: . # owner: myusername # group: myusername user::rwx group::r-x group:apache:rw- mask::rwx other::r-x I simply wanted to change the ownership to myusername:apache and the file permissions to 755. I have no idea how to fix the permissions now. Any help would be really appreciated! Thanks, Tom

    Read the article

  • Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

    - by h4xnoodle
    I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

    Read the article

  • Windows 7 fails to install on KVM with qemu

    - by kief_morris
    I'm trying to install Windows 7 on a virtual machine on my 64 bit Ubuntu Karmic box. I get to the point of selecting my language settings and clicking 'install now', but a short while later I get a blue screen of death. I've tried a few variations, including using the 32 bit (fails very quickly). The virt-install command I've tried includes this: sudo virt-install --connect qemu:///system -n ksm-win7 -r 2048 \ --disk path=/home/kief/VM-Images/ksm-win7.qcow2,size=50 \ -c /var/Software/Windows7/Full/64bit/SW_DVD5_SA_Win_Ent_7_64BIT_English_Full_MLF_X15-70749.ISO \ --vnc --os-type windows --os-variant vista --hvm The limited info I could find suggested that 'vista' should work as the --os-variant, I haven't found any values specific to windows 7. Here's my blue screen: I've found very little by Googling, so I'm guessing this isn't a case of KVM simply not supporting Windows 7. Thanks for any help. Update: I have been able to successfully create a Windows 7 VM using the graphical "Virtual Machine Manager" app, although I don't really understand the cause of the problem with the VM created with virt-install. Comparing the configuration files under /etc/libvirt/qemu provides some clues, although I don't know enough to interpret them properly. The interesting differences in the two VM configurations are: --- win7-virt-install.xml +++ win7-vmm.xml -<domain type='qemu'> +<domain type='kvm'> @@ -21 +21 @@ - <emulator>/usr/bin/qemu-system-x86_64</emulator> + <emulator>/usr/bin/kvm</emulator> @@ -23 +23 @@ - <source file='/home/kief/VM-Images/ksm-win7.qcow2'/> + <source file='/var/lib/libvirt/images/ksm-win7x64.img'/> I'm not sure if this means the working VM is not using qemu at all, or if there is some other difference in the way it's used with kvm. Update2: So I've answered my own question (mostly) below. A KVM VM needs to use KVM's own CPU emulation rather than qemu's in order for me to get Windows 7 installed. I'm not sure whether there is something that can be done to get it working on a qemu-emulation CPU, or whether a newer version will support it. But at least it is possible to get it running on a KVM VM.

    Read the article

  • Remove DRM from *.pdb e-book that I own - while maintaining footnotes, etc.?

    - by ziesemer
    Background: I've already reviewed Remove DRM from ePub Files? and How can I remove DRM from Kindle books? - the answers to which have already brought me partial process. The challenge is that I have a few purchased *.pdb e-books that I purchased in years past, e.g. 2006. In particular, they were purchased from the palm eBook Store (ebooks.palm.com - now defunct, possibly part of http://www.ereader.com / Barnes & Noble?) - originally for use on a Palm Treo that has since died. Of particular note is that I have a revision / publication of a book that is no longer published, and not available as an e-book from anywhere else that I've been able to find. (I feel fortunate to have even found the *.pdb files on backup.) I have a copy of the electronic invoice for it - which includes the details necessary for unlocking - the "Purchaser's Name" and the "Unlock Code" - which is the digits of my credit card # that I had used to purchase it. Given the above information, I was surprised to be able to open the book using the Windows eReader software and unlock it. Here I am able to view the complete contents and functionality of the book as I had done on the Palm Treo - including viewing of linked annotations / footnotes, etc. Following the full spirit of Remove DRM from ePub Files?, I want to ensure that I can access this on any device of my choosing - especially now and in the future, and as new technologies arrive and disappear. Ideally, I'm just looking to accomplish the minimum necessary to allow import into calibre. Outstanding Issue: I've found a few solutions that have given me "90%" success - all based on various versions of some Python scripts - including versions 0.21 and 0.11 of "erdr2pml.py" (based on "ereader2html"). Unfortunately, unless I'm missing something, these programs are attempting to also "convert" - instead of just "decrypting". As such, the outputs are missing embedded images and/or footnotes. I.E., there is a linked, underlined, and super-scripted "a" after some text - but the content of the footnote no longer exists. I can validate this by inspecting the generated *.pmlz file, and nowhere does it contain the original footnotes that are still visible in the original *.pdb file. I'm hoping to find a process that focuses on the decryption only, instead of attempting any type of a content conversion - or if a content conversion is required / involved, that it maintains all of the features and content of the original. (Again, I'm confident that if/once a version is obtained that calibre can import, I'll be able to fulfill the rest of my requirements.)

    Read the article

  • Macintosh computers cannot connect to router unless we re-start the modem and router

    - by dwwilson66
    We have a small office network with DSL and a Netgear WNR-2000 wireless router acting as a DHCP server. There are nine devices connected to the router, wirelessly and wired. Whenever a Mac computer tries to connect, it's unsuccessful until we restart the router. Each of the possible devices that can connect to the network is listed in a table to assign certain IP addresses to certain MAC addresses. I am running WPA-PSK security. I can view the router status and see that the Mac's MAC address is visible to the router, but with a 169.* IP address, even though I'm assigning its MAC address to an IP address within my subnet. All non-Mac devices attached to the network connect properly, and can access the network properly even AFTER the Mac has not successfully connected. The network includes Windows devices, Roku boxes, printers and internet ready TVs. This to me, would point to a DHCP issue with how Mac communicates with my network. One interesting thing to note is that if a Mac connects and is prevented from sleeping, it will stay connected indefinitely; reissuing the security cert from the router works fine. I'm not sure if that's supposed to sever & re-establish a connection with the updated credentials or not, but I do stay connected. If the Mac sleeps and is awakened while the security cert is still valid, it connects fine. If the security certificate expires while the Mac is asleep, we need to restart the router. Restarting the router will ALWAYS assigns the proper IP addresses to the Mac equipment. I have heard anecdotally that Mac doesn't play well with 802.11n; I have not tested any other Wireless protocols. There's a couple issues here: First, I found this on Stack, Mac laptop crashing wireless router, but it's not rally applicable since the router isn't crashing. But, it does give some clues about Mac's accessing the network. I did change my encryption from WEP to WPA-PSK, but after about a week, we're still experiencing the issue. I'm not really sure if there's anything else useful in that question. Second, I'm considering getting a 802.11c router and hooking it up to the wireless N router. the 802.11c router would handle all the Mac traffic, and would be set up as a Mac-only subnet. Everything else would remain as is. However, I'm not sure if this is doable on a technology level...do I need a bridge or is this some way to do this with regular consumer gear?

    Read the article

  • can't use periods in ServerName [Lion Apache installation]

    - by punchfacechamp
    I can access my host like this… http://keggyshop but can't use periods… http://keggyshop.dev here's my virtual host directive… <VirtualHost *:80> ServerName keggyshop ServerAlias keggyshop.dev DocumentRoot "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public" <Directory "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public"> Options Includes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> host file 127.0.0.1 keggyshop 127.0.0.1 keggyshop.dev traceroute for keggyshop… user$ traceroute keggyshop traceroute to keggyshop (192.168.1.184), 64 hops max, 52 byte packets 1 keggyshop (192.168.1.184) 1.188 ms 0.683 ms 0.747 ms traceroute for keggyshop.dev… user$ traceroute keggyshop.dev traceroute: Warning: keggyshop.dev has multiple addresses; using 184.106.15.239 traceroute to keggyshop.dev (184.106.15.239), 64 hops max, 52 byte packets 1 * 192.168.1.1 (192.168.1.1) 0.856 ms 0.568 ms 2 10.81.192.1 (10.81.192.1) 15.232 ms 7.002 ms 7.936 ms 3 gig-0-3-0-6-nycmnya-rtr2.nyc.rr.com (24.29.97.122) 7.962 ms 7.813 ms 7.712 ms 4 bun101.nycmnytg-rtr001.nyc.rr.com (184.152.112.107) 10.999 ms 14.001 ms 15.466 ms 5 bun6-nycmnytg-rtr002.nyc.rr.com (24.29.148.250) 11.231 ms 17.321 ms 12.745 ms 6 107.14.19.24 (107.14.19.24) 13.972 ms 11.704 ms 16.477 ms 7 ae-1-0.pr0.nyc30.tbone.rr.com (66.109.6.161) 9.237 ms 11.896 ms 107.14.19.153 (107.14.19.153) 7.481 ms 8 xe-5-0-6.ar2.ewr1.us.nlayer.net (69.31.94.57) 16.682 ms 11.791 ms 11.981 ms 9 ae3-90g.cr1.ewr1.us.nlayer.net (69.31.94.117) 12.977 ms 15.706 ms 9.709 ms 10 xe-5-0-0.cr1.ord1.us.nlayer.net (69.22.142.74) 30.473 ms 30.497 ms 31.750 ms 11 ae1-20g.ar1.ord6.us.nlayer.net (69.31.110.250) 36.699 ms 50.785 ms 35.957 ms 12 as19994.xe-1-0-7.ar1.ord6.us.nlayer.net (69.31.110.242) 34.723 ms 31.118 ms 29.967 ms 13 coreb.ord1.rackspace.net (184.106.126.138) 30.471 ms corea.ord1.rackspace.net (184.106.126.136) 33.392 ms 35.210 ms 14 core1-coreb.ord1.rackspace.net (184.106.126.129) 32.453 ms core1-corea.ord1.rackspace.net (184.106.126.125) 32.020 ms core1-coreb.ord1.rackspace.net (184.106.126.129) 32.417 ms 15 core1-aggr401a-3.ord1.rackspace.net (173.203.0.157) 31.274 ms 34.854 ms 30.194 ms

    Read the article

  • PHP app breaks on Nginx, but works on Apache

    - by rizon1990
    I want to migrate a PHP application from Apache to Nginx. The problem is that the App breaks, because the routing doesn't work anymore and I'm not exactly sure how to fix it. The PHP application includes some .htaccess files and I tried to convert those to Nginx. The first one is in the document root: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ public/ [L] RewriteRule (.*) public/$1 [L] </IfModule> The second one is in /public/ <IfModule mod_rewrite.c RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule ^(.*)$ index.php?url=$1 [PT,L] </IfModule> <IfModule !mod_rewrite.c> ErrorDocument 404 index.php </IfModule> The third and last one is: deny from all My nginx version of it looks like the following: #user nobody; worker_processes 1; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip on; server { listen 8080; server_name localhost; root /Library/WebServer/Documents/admin; location / { index index.php; rewrite ^/$ /public/ break; rewrite ^(.*)$ /public/$1 break; } location /public { if (!-e $request_filename){ rewrite ^(.*)$ /index.php?url=$1 break; } } location /library { deny all; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { root /Library/WebServer/Documents/admin; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } The problem I face is that something that the routing is broken and just returns a 404 page instead. Hopefully someone has an idea and know how to fix it ;) Thanks EDIT I got it working with this config location /library { deny all; } location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { access_log off; rewrite ^(.*)$ /public/$1 break; } location / { rewrite ^/(.+)$ /index.php?url=$1 last; } I'm sure there are better solutions and I'm open for suggestions.

    Read the article

  • Hang while starting several daemons [solved]

    - by Adrian Lang
    I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before. Update3: I found the problem. My /etc/nsswitch.conf specified ldap as hosts lookup backup, which is not available at that time of the boot. Relying on dns solely fixes my boot problems.

    Read the article

  • Apache won't serve images larger than ~2K

    - by dtbaker
    Hello, Just upgraded an old box to Ubuntu to 10.04.2 LTS. Apache will not display images to a browser that are over about 2K. Small images seem to display fine. Static HTML and PHP continues to works fine as well. Installed: apache2 2.2.14-5ubuntu8.4 apache2-mpm-prefork 2.2.14-5ubuntu8.4 apache2-utils 2.2.14-5ubuntu8.4 apache2.2-bin 2.2.14-5ubuntu8.4 apache2.2-common 2.2.14-5ubuntu8.4 here is an ngrep of an image that doesn't display fine in the browser: T 192.168.0.4:32907 - 192.168.0.54:80 [AP] GET /path/path/logo.png HTTP/1.1..Host: 192.1 68.0.54..Connection: keep-alive..Accept: application/xml,application/xhtml+ xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5..User-Ag ent: Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.98 Safari/534.13..Accept-Enco ding: gzip,deflate,sdch..Accept-Language: en-US,en;q=0.8..Accept- Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3.... T 192.168.0.54:80 - 192.168.0.4:32907 [A] HTTP/1.1 200 OK..Date: Wed, 09 Mar 2011 05:28:38 GMT..Server: Apa che/2.2.14 (Ubuntu)..Last-Modified: Tue, 05 Oct 2010 11:59:17 GMT ..ETag: "17b6f4-15fe-491dd63eb2f40"..Accept-Ranges: bytes..Conten t-Length: 5630..Keep-Alive: timeout=15, max=100..Connection: Keep -Alive..Content-Type: image/png.....PNG........IHDR...!...v...... .%.....sRGB.........bKGD..............pHYs.................tIME.. etc... This looks ok to me! I have tried firefox and chrome, both display small images fine but when a large image is requested the browser prompts to download the file. When the image file is saved to the local computer it is corrupt, it also takes a long time to save which makes me think the browser cannot see the content-length header sent from apache. Also when I look at the saved image file it includes the headers from apache, along with a bit of garbage at the top, like so: vi logo.png: ^@^UÅd^@$^]V^S^H^@E^@^Q,n!@^@@^F^@^@À¨^@6À¨^@^D^@P^Y¬rÇŹéw^P^@Ú^@^@^A^A^H ^@^GÝ^]^@pbSHTTP/1.1 200 OK^M Date: Wed, 09 Mar 2011 04:47:04 GMT^M Server: Apache/2.2.14 (Ubuntu)^M Last-Modified: Tue, 05 Oct 2010 11:59:17 GMT^M ETag: "17b6ff-157c-491dd63eb2f40"^M Accept-Ranges: bytes^M Content-Length: 5500^M Keep-Alive: timeout=15, max=94^M Connection: Keep-Alive^M Content-Type: image/png^M ^M PNG^M etc... Any ideas? It's driving me nuts. There is nothing in apache error logs, and permissions are fine (because the image data is there, it's just somewhat corrupt). There's no proxy or iptables on this ubuntu box either. Thanks heaps!! Dave ps: just tried on IE from a different computer, same problem :( pps: rebooted server, no help.

    Read the article

  • Amazon Elastic Terms and Conditions

    - by PP
    WARNING: Have you really read Amazon's Terms and Conditions? Would anybody seriously agree to this term on Amazon's Elastic services sign up page? 6.2. Restrictions with Respect to Use of Marks. Your use of any trademarks, service marks, service or trade names, logos, and other designations of AWS and its affiliates or licensors, hereinafter "Marks", shall strictly comply with the following provisions. You may use the Marks in conjunction with the display of the AWS Content and for the purpose of indicating that your Application was created using the Services. You may use the Marks only in the form in which we make them available to you and not in any manner that disparages Amazon, its affiliates or its licensors, or that otherwise dilutes any Mark. Other than your limited right to use the Marks as provided in this Agreement, we and our licensors retain all right, title, and interest in and to the Marks. You will not at any time now or in the future challenge or assist others to challenge the validity of the Marks, or attempt to register confusingly similar trademarks, trade names, service marks or logos. You agree to follow our the Trademark Use Guidelines posted on the Amazon Web Services™ Trademark Guidelines page (the "Trademark Guidelines") as those guidelines may change from time to time. The Trademark Guidelines are incorporated herein by reference. You must immediately discontinue use of any Mark as specified by us at any time in writing. We may modify any Marks provided to you at any time, and upon notice, you will use only the modified Marks and not the old Marks. Other than as specified in this Agreement, you may not use any trademark, service mark, trade name or other business identifier of Amazon or its affiliates unless you obtain Amazon's or its affiliates' prior written consent. The foregoing prohibition includes the use of "amazon," any other trademark of AWS, Amazon or its affiliates, or variations or misspellings of any of them, in the name of an Application or in a URL to the left of the top-level domain name (e.g., ".com", ".net", "co.uk", etc.)-for example, a URL such as "amazon.mydomain.com", "amaozn.com" or "amazonauctions.net" are expressly prohibited. Any use you make of the Marks shall inure to our benefit and you hereby irrevocably assign to us all right, title and interest in the same. In addition, you agree not to misrepresent or embellish the relationship between us and you, for example by implying that we support, sponsor, endorse, or contribute money to you or your business endeavors. If you are a large company and you want to use Amazon's services you must agree that: you may not use the word "amazon" in any domain name you control (even if you are a forestry company) you may not use any word Amazon choose to trademark in any domain you control (regardless of whether the name has a different meaning/purpose in your industry) from now until forever you will never dispute any claim Amazon makes on any word you or anybody else uses Seriously, who would sign such a thing?

    Read the article

  • APC File Cache not working but user cache is fine

    - by danishgoel
    I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

    Read the article

  • Generating/managing config files for hosted application

    - by mfinni
    I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

    Read the article

  • XP shared folders not accessible after BIOS changed

    - by stijn
    Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

    Read the article

  • Hang while starting several daemons

    - by Adrian Lang
    I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before.

    Read the article

  • How to setup ssh's umask for all type of connections

    - by Unode
    I've been searching for a way to setup OpenSSH's umask to 0027 in a consistent way across all connection types. By connection types I'm referring to: sftp scp ssh hostname ssh hostname program The difference between 3. and 4. is that the former starts a shell which usually reads the /etc/profile information while the latter doesn't. In addition by reading this post I've became aware of the -u option that is present in newer versions of OpenSSH. However this doesn't work. I must also add that /etc/profile now includes umask 0027. Going point by point: sftp - Setting -u 0027 in sshd_config as mentioned here, is not enough. If I don't set this parameter, sftp uses by default umask 0022. This means that if I have the two files: -rwxrwxrwx 1 user user 0 2011-01-29 02:04 execute -rw-rw-rw- 1 user user 0 2011-01-29 02:04 read-write When I use sftp to put them in the destination machine I actually get: -rwxr-xr-x 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write However when I set -u 0027 on sshd_config of the destination machine I actually get: -rwxr--r-- 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write which is not expected, since it should actually be: -rwxr-x--- 1 user user 0 2011-01-29 02:04 execute -rw-r----- 1 user user 0 2011-01-29 02:04 read-write Anyone understands why this happens? scp - Independently of what is setup for sftp, permissions are always umask 0022. I currently have no idea how to alter this. ssh hostname - no problem here since the shell reads /etc/profile by default which means umask 0027 in the current setup. ssh hostname program - same situation as scp. In sum, setting umask on sftp alters the result but not as it should, ssh hostname works as expected reading /etc/profile and both scp and ssh hostname program seem to have umask 0022 hardcoded somewhere. Any insight on any of the above points is welcome. EDIT: I would like to avoid patches that require manually compiling openssh. The system is running Ubuntu Server 10.04.01 (lucid) LTS with openssh packages from maverick. Answer: As indicated by poige, using pam_umask did the trick. The exact changes were: Lines added to /etc/pam.d/sshd: # Setting UMASK for all ssh based connections (ssh, sftp, scp) session optional pam_umask.so umask=0027 Also, in order to affect all login shells regardless of if they source /etc/profile or not, the same lines were also added to /etc/pam.d/login. EDIT: After some of the comments I retested this issue. At least in Ubuntu (where I tested) it seems that if the user has a different umask set in their shell's init files (.bashrc, .zshrc,...), the PAM umask is ignored and the user defined umask used instead. Changes in /etc/profile did't affect the outcome unless the user explicitly sources those changes in the init files. It is unclear at this point if this behavior happens in all distros.

    Read the article

  • load-causing processes disappearing from "top" ps -o pcpu shows bogus numbers

    - by Alec Matusis
    I administer a large number of servers, and I have this problem only with Ubuntu 10.04 LTS: I run a server under normal load (say load average 3.0 on an 8-core server). The "top" command shows processes taking certain % of CPU that cause this load average: say PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11008 mysql 20 0 25.9g 22g 5496 S 67 76.0 643539:38 mysqld ps -o pcpu,pid -p11008 %CPU PID 53.1 11008 , everything is consistent. The all of the sudden, the process causing the load average disappears from "top", but the process continues to run normally (albeit with a slight performance decrease), and the system load average becomes somewhat higher. The output of ps -o pcpu becomes bogus: # ps -o pcpu,pid -p11008 %CPU PID 317910278 1587 This happened to at least 5 different severs (different brand new IBM System X hardware), each running different software: one httpd 2.2, one mysqld 5.1, and one Twisted Python TCP servers. Each time the kernel was between 2.6.32-32-server and 2.6.32-40-server. I updated some machines to 2.6.32-41-server, and it has not happened on those yet, but the bug is rare (once every 60 days or so). This is from an affected machine: top - 10:39:06 up 73 days, 17:57, 3 users, load average: 6.62, 5.60, 5.34 Tasks: 207 total, 2 running, 205 sleeping, 0 stopped, 0 zombie Cpu(s): 11.4%us, 18.0%sy, 0.0%ni, 66.3%id, 4.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 74341464k total, 71985004k used, 2356460k free, 236456k buffers Swap: 3906552k total, 328k used, 3906224k free, 24838212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 805 root 20 0 0 0 0 S 3 0.0 1493:09 fct0-worker 982 root 20 0 0 0 0 S 1 0.0 111:35.05 fioa-data-groom 914 root 20 0 0 0 0 S 0 0.0 884:42.71 fct1-worker 1068 root 20 0 19364 1496 1060 R 0 0.0 0:00.02 top Nothing causing high load is showing on top, but I have two highly loaded mysqld instances on it, that suddenly show crazy %CPU: #ps -o pcpu,pid,cmd -p1587 %CPU PID CMD 317713124 1587 /nail/encap/mysql-5.1.60/libexec/mysqld and #ps -o pcpu,pid,cmd -p1624 %CPU PID CMD 2802 1624 /nail/encap/mysql-5.1.60/libexec/mysqld Here are the numbers from # cat /proc/1587/stat 1587 (mysqld) S 1212 1088 1088 0 -1 4202752 14307313 0 162 0 85773299069 4611685932654088833 0 0 20 0 52 0 3549 27255418880 5483524 18446744073709551615 4194304 11111617 140733749236976 140733749235984 8858659 0 552967 4102 26345 18446744073709551615 0 0 17 5 0 0 0 0 0 the 14th and 15th numbers according to man proc are supposed to be utime %lu Amount of time that this process has been scheduled in user mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). This includes guest time, guest_time (time spent running a virtual CPU, see below), so that applications that are not aware of the guest time field do not lose that time from their calculations. stime %lu Amount of time that this process has been scheduled in kernel mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). On a normal server, these numbers are advancing, every time I check the /proc/PID/stat. On a buggy server, these numbers are stuck at a ridiculously high value like 4611685932654088833, and it's not changing. Has anyone encountered this bug?

    Read the article

  • Can't connect to svnserve on localhost - connection actively refused

    - by RMorrisey
    When I try to connect using Tortoise to my SVN server using: svn://localhost/ Tortoise tells me: "Can't connect to host 'localhost'. No connection could be made because the target machine actively refused it." How can I fix this? I am trying to set up a subversion server on my local PC for personal use. I am running Windows Vista, with SlikSVN and TortoiseSVN installed. I previously had everything working correctly, but I found that I couldn't merge(!), apparently due to a version mismatch between the SVN client and server. Anyway... I now have the following setup: I created a repository using svnadmin create; it resides at C:\svnGrove C:\svnGrove\conf\svnserve.conf (# comments omitted): [general] anon-access=read auth-access=write password-db=passwd #authz-db=authz realm=svnGrove C:\svnGrove\conf\passwd: [users] myname=mypass My Subversion Server service is pointed to: C:\Program Files\SlikSvn\bin\svnserve.exe --service -r C:\svnGrove It shows the TCP/IP service as a dependency. I have also tried running svnserve from the command line, with similar results. The below is provided by the 'about' option in TortoiseSVN: TortoiseSVN 1.6.10, Build 19898 - 32 Bit , 2010/07/16 15:46:08 Subversion 1.6.12, apr 1.3.8 apr-utils 1.3.9 neon 0.29.3 OpenSSL 0.9.8o 01 Jun 2010 zlib 1.2.3 The following is from svn --version on the command line (not sure why it says CollabNet, CollabNet was the previous SVN binary that I had set up. The uninstaller failed to remove everything gracefully): svn, version 1.6.12 (SlikSvn/1.6.12) WIN32 compiled Jun 22 2010, 20:45:29 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme I disabled my Windows Firewall and CA Internet Security, without success in resolving the issue. Edit The old version of svnserve was still set up as a service after the uninstall, pointed to this path: C:\Program Files\Subversion\svn-win32-1.4.6\bin I edited the registry key for the service to point to the new path (shown above). Whether I run svnserve as a service, or using -d, I do not see an entry for that port number in the listing generated by netstat -anp tcp.

    Read the article

  • nginx + Jetty - thousands of connections stuck in LAST_ACK

    - by virulence
    I have a FreeBSD machine with jails -- two in particular, one that runs nginx and another that runs a Java program that accepts requests via Jetty (embedded mode) Jetty receives upwards of 500 requests/sec constantly and there has been an issue lately where I will constantly have over 60,000 connections in the LAST_ACK state between nginx and jetty. Distribution of all connections (includes some other services, particularly php-fpm) root@host:/root # netstat -an > conns.txt root@host:/root # cat conns.txt | awk '{print $6}' | sort | uniq -c | sort -n 18 LISTEN 112 CLOSING 485 ESTABLISHED 650 FIN_WAIT_2 1425 FIN_WAIT_1 3301 TIME_WAIT 64215 LAST_ACK Distribution of nginx - jetty connections root@host:/root # cat conns.txt | grep '10.10.1.57' | awk '{print $6}' | sort | uniq -c | sort -n 1 3 CLOSE_WAIT 3 LISTEN 18 FIN_WAIT_2 125 ESTABLISHED 64193 LAST_ACK I'd prefer every request to fully close the connection. Clients requests are about 10 minutes apart from each other so connections must be closed. Some of the connections, tcp4 0 0 10.10.1.50.46809 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46805 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46797 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46794 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46790 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46789 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46771 10.10.1.57.9050 LAST_ACK etc.. On Jetty's end I've set maxIdleTime to 2000 -- before this all connections were in ESTABLISHED but they are now LAST_ACK On Jetty's end I've set Connection: close (i.e response.setHeader(HttpHeaders.CONNECTION, HttpHeaderValues.CLOSE);) Jetty never reports a lot of open connections -- always very few. PF/IPFW is not currently being used nginx - reset_timedout_connection is on I cannot figure out how to get nginx or jetty to forcibly close the connection, is this simply something that needs to be fixed in Jetty so that it fully closes the socket after the request finishes? Thanks a lot in advance EDIT: forgot my nginx config for the proxy setup- proxy_pass http://10.10.1.57:9050; proxy_set_header HTTP_X_GEOIP $http_x_geoip; proxy_set_header GEOIP_COUNTRY_CODE $geoip_country_code; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header Connection ""; proxy_http_version 1.1; EDIT2: Forcing Jetty to close the connection via request.getConnection().getEndPoint().close() does nothing -- it's obvious the connection IS being closed (as it's in LAST_ACK) but why isn't it getting past this? Is Nginx keeping the connection open to the backend for some reason?

    Read the article

  • Ping Unknown Host on CentOS at EC2

    - by organicveggie
    Weird problem. We have a collection of servers running CentOS 5 on EC2. The setup includes two DNS servers and two LDAP servers. DNS has a CNAME pointing at the primary LDAP server. One machine (and only one machine) is giving me problems. I can ssh into the server using LDAP authentication. But once I'm on the machine, ping won't resolve the LDAP host even though DNS seems to work fine. Here's ping: $ ping ldap.mycompany.ec2 ping: unknown host ldap.mycompany.ec2 Here's the output of dig: $ dig ldap.mycompany.ec2 ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> ldap.studyblue.ec2 ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2893 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ldap.mycompany.ec2. IN A ;; ANSWER SECTION: ldap.mycompany.ec2. 3600 IN CNAME ec2-hostname.compute-1.amazonaws.com. ec2-hostname.compute-1.amazonaws.com. 55 IN A aaa.bbb.ccc.ddd ;; Query time: 12 msec ;; SERVER: 10.32.159.xxx#53(10.32.159.xxx) ;; WHEN: Tue May 31 11:16:30 2011 ;; MSG SIZE rcvd: 107 And here is resolv.conf: $ cat /etc/resolv.conf search mycompany.ec2 nameserver 10.32.159.xxx nameserver 10.244.19.yyy And here is my hosts file: $ cat /etc/hosts 10.122.15.zzz bamboo4 bamboo4.mycompany.ec2 127.0.0.1 localhost localhost.localdomain And here's nsswitch.conf $ cat /etc/nsswitch.conf passwd: files ldap shadow: files ldap group: files ldap sudoers: ldap files hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files ldap publickey: nisplus automount: files ldap aliases: files nisplus So DNS works the way I would expect. And I can ping the ldap server by ip address. And I can even access the box with SSH using LDAP authentication. Any suggestions?

    Read the article

  • Two VHosts Use Same DocumentRoot, PHP Not Working on Second VHost

    - by thegrip
    I'm helping maintain an e-commerce site that is run on Magento. This site is an outlet for our wholesale customers. We have recently decided to open a second store to reach out to our Retail customers. We decided to set up another website inside of our magento store so that we can share the products across both stores. I'm in the process of setting up this new site on the server, but have run into an issue. I've set up the second vhost for the new retail site, and I've made the DocumentRoot for this vhost the same as for the wholesale site, so we can use one magento application for both sites. This is where the error occurs. When I browse to the new store it triggers a download of the index.php file. So I know the DocumentRoot directive is working, but it seems like PHP is being broken in the process. I'm using plesk to manage the server. I've made sure that PHP is turned on in both vhosts and still get the same issue. Does this sound like a problem of PHP breaking, or is it possible my vhost.conf file is set up incorrectly? (Although the vhost is managed by plesk and appears correct) Any help will be much appreciated. EDIT: Here's the vhost configs (generated by plesk): <VirtualHost IPADDRESS:80> ServerName domain.com:80 ServerAdmin "[email protected]" DocumentRoot /var/www/vhosts/domain.com/subdomains/tk/httpdocs CustomLog /var/www/vhosts/domain.com/statistics/logs/access_log plesklog ErrorLog /var/www/vhosts/domain.com/statistics/logs/error_log <IfModule mod_ssl.c> SSLEngine off </IfModule> <Directory /var/www/vhosts/domain.com/subdomains/tk/httpdocs> <IfModule mod_php4.c> php_admin_flag engine on php_admin_flag safe_mode off php_admin_value open_basedir "/var/www/vhosts/domain.com/subdomains/tk/httpdocs:/tmp" </IfModule> <IfModule mod_php5.c> php_admin_flag engine on php_admin_flag safe_mode off php_admin_value open_basedir "/var/www/vhosts/mkdesigngroup.com/subdomains/tk/httpdocs:/tmp" </IfModule> Options -Includes -ExecCGI </Directory> Include /var/www/vhosts/domain.com/subdomains/tk/conf/vhost.conf And here's what I've added in vhost.conf (which is included by plesk): DocumentRoot /var/www/vhosts/domain.com/subdomains/dev/httpdocs -grip

    Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >