Search Results

Search found 7007 results on 281 pages for 'outlook 2003'.

Page 266/281 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• How can visiting a webpage infect your computer?

  - by Cybis

  My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

  Read the article

• Virtualbox Networking: XP Guest, Ubuntu Host: Connecting to Windows servers & local network?

  - by user51833

  Here's what I have: Windows XP running in VirtualBox 3.0.8_OSE r53138; Host OS = Ubuntu 9.10 "Karmic Koala"; Windows network in my office with smb fileservers; Guest OS is connected to the internet and is sharing folders with Host OS; Limited networking expertise. Here's what I actually need to do: Use MS Outlook in my XP guest with all its calendar-sharing features and stuff (if this is all done through the internet then great) - or find a Linux app that can do the same stuff; Map Windows network servers, eg. smb://server01/ in my XP guest (I can already access these in Ubuntu. Here's what I've tried with no luck: Entering the server address (example above) in my XP guest windows explorer address bar (got a "could not access the file, path or drive" error message - maybe if I could enter login/pass information? But I don't know how); Mapping the server as a network drive (Windows could not find the path); Mounting the server as one of my shared folders (I couldn't find it through the shared folders browser in VirtualBox - is there somewhere in the Linux filesystem that Ubuntu keeps links to mounted servers?).

  Read the article

• How to remove Media Center from Windows 8

  - by Arabella

  I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

  Read the article

• Which steps are required to avoid my server being considered as spam sender?

  - by Cyril N.

  I'm looking to set up a webmail server that will be used by a lots of users that will receive and send emails. They will also have the possibility to forward emails they receive. I'd like to know which steps are recommanded/required to indicate to others Mail services (GMail, Outlook, etc) that my server is not used as a spam sender (disclaimer : IT's NOT ! :p) but a legitimate one. I know I have to define a SPF TXT records for example, but what others steps would you recommend me to do ? For example, is there a formula like having a proportional number of servers based on the amount of email sent (for having a different IP address) ? (something like sending a maximum of 1M emails / per IP / per day ?) Something else I'm missing ? I tried to search online, but I mostly find how to avoid emails sent with scripts (like PHP) being put in the SPAM folder. I'm looking for a server/dns configuration side. Thanks a lot for your help/tips, I appreciate !

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Recommendations for good Unix MTA / groupware solutions? [closed]

  - by Jez

  Possible Duplicate: Exchange server replacement that runs on Linux I'm setting up a Debian server, and one of the things I need on it is an MTA. I don't want to use something like Exim or Postfix because I want something that ties in SMTP, POP3, and IMAP all in one (a la Microsoft Exchange). Most MTAs also seem to be hellishly difficult to configure. Try and read the Exim documentation; you could do a university degree on it (I'm not kidding). When you can get an HTTP server like Cherokee which is easy to configure and has a nice web interface, do MTAs or groupware solutions need to be that hard? I'm aware that some people think "the Unix way" is to have lots of different interacting pieces of software (like maybe an SMTP MTA, POP3 service, webmail service, and overarching manager to tie them all together), but I think this is a situation where that just makes things a lot harder to deal with and one large software suite fits in much more nicely. So, I'm looking for good open source software suites that will run on Debian that: Combine (at least) SMTP, POP3, and IMAP Are easy(ish) to configure Have a nice configuration web interface or GUI Are not defunct projects I don't mind if it's groupware and offers calendaring too, but I would only be using the e-mail functionality for now. Another nice-to-have would be built-in webmail (if we're combining a bunch of functionality, why not?) Note however that I do NOT need Outlook support. I am not really looking for an "Exchange replacement drop-in". The suites I've found so far that seem to match the above criteria (and have appropriate licenses) are Citadel, Kolab, and Zimbra. I'd appreciate anyone who has experience with any of these giving me the pros and cons of them, such as how easy they are to configure and what their performance is like. I'd also appreciate any other suggestions for solutions that fulfil my criteria that I may have missed out.

  Read the article

• Copying files to my laptop makes them locked

  - by John

  When I save files from e.g. remote desktop or from an email (outlook) attachments, or from skype even to my local machine they show a locked Icon on the file. Then e.g. SQL Server doesn't let me restore backups as it says the operating system doesn't have access to the file. I've had success fixing this by setting the ownership of the parent folder to my user and then let it apply to sub folders. Also sometimes I need to click - Proerties - Security - Advanced - Change Permmissions, then check "change child permissions..." and apply on the parent dir. I'm using Windows 7 64 bit Proffessional, on HP Probook 4530, and I have a administrator user. This is a real pain to do everytime. I suspect it might be because of HP software that came with the laptop, I think there is drive encryption as part of the protect tools. Although I'm hoping there's something in windows i can set to change the behaviour to not lock these files.

  Read the article

• OpenOffice Vs Microsoft Office 2007/2010

  - by Moody Tech

  I have been asked to summarise the pros and cons in connection with the choices between Microsoft Office Vs OpenOffice. I have a broad idea of what needs to be said. However I would like to open a discussion here and have a single place to go to when the time comes to give the summary to management. There are obvious points of contention: For me the lack of compliance with Group Policy is a major concern [Default save location/visibility of C:/Visibility of files and folders on the HDD] However I am sure that functionality and compatibility will be the prime mover. We are looking at making major savings by reducing our commitment to Microsoft licensing. So what are your experiences? What happens when there are no direct equivalents? [Word has a close match in OpenOffice, but a database solution match is not as close, neither is an Outlook [connecting to Exchange Server and downloading all calendars, shared calendars, scheduled events, for Exchange will still exist after the move to OpenSource solutions] In summary then: What do you see as: The benefits of this plan? How do you see the problems being manifest? Discuss.... Many thanks.

  Read the article

• JavaScript settings are on but I still have issues with web sites using JavaScript.

  - by Mike

  I have two computers that are the same at home except I have installed Adobe Acrobat 9 Pro Extended on my main computer along with the 2010 Outlook (Beta). I have issues when I log into a website that uses pop up calendars to select the date. I pasted it below. I checked my other computer and it is fine. I've checked the Java setting and they are correct. I am at a loss. Any suggestions? Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; eMusic DLM/4; .NET4.0C) Timestamp: Mon, 26 Jul 2010 22:03:59 UTC Message: 'CalendarPopup' is undefined Line: 390 Char: 2 Code: 0 Message: 'CalendarPopup' is undefined Line: 410 Char: 2 Code: 0

  Read the article

• Why am I getting programs stuck in log_wait_commit under Linux?

  - by staticsan

  There is something subtly wrong with my Linux install that I just can't locate. It is Ubuntu Lucid Lynx (10.04) 64-bit. Hardware is a Dell Optiplex 960: Intel Core 2 Quad CPU, 8Gb of RAM, 2x 300Gb HDDs. /home is ext2 on one disk and everything else is on the other (/ is also ext3). I have VirtualBox running a 64-bit Vista image for Outlook calendaring, but the heavyweight apps are IntelliJ, NetBeans, MySQL and Opera. Opera also loads my mail (IMAP) of which there is over 10,000 messages. The problem is that Opera stalls for a few seconds from time-to-time. Watching the process list shows it's in log_wait_commit which means (as far as I have figured out) the filesystem is holding things up. Sometimes I can make this happen by doing a subversion update, but usually it happens for no reason I can see. It usually happens to Opera, but I've seen NetBeans go under, too. It doesn't make the app crash - it's just completely unresponsive for a few seconds. Googling has not helped. The closest I got was to remove the sync attribute in the file system. This achieved nothing. On the advice of a Linux guru friend, I lowered /proc/sys/vm/dirty_writeback_centisecs to 300, but that didn't do anything, either. And it was all he could think of. What is going on and can I fix it? (And how?)

  Read the article

• troubleshooting postifx -> exchange connection issues

  - by Systemspoet

  I have three linux-based mail routers that run postfix and relay mail to our on-premise exchange server as well as to outlook.com, splitting the mail based on ldap atttributes. What I've observed sporadically since upgrading this spring from Exchange 2007 to 2010 is that all three of the mail relays will, for about 20 minutes, fail to connect to exchange. Postfix logs it as "lost connection with exchange.contosso.edu" ; this problem almost always occurs to all three mail relays at the same time, and lasts for slightly under 20 minutes. If I can catch it while it's occuring, and I manually do "telnet exchange.contosso.edu 25" from one mail relay and force a message through (helo, mail from, rcpt to, data, etc), then it clears that relay up. The exchange "server" is actually two machines with the HT role on them, load balanced via windows NLB. I've worked pretty hard to figure out what's happening from the postfix side and I can't see any evidence of any misbehavior. My question is, how do I attack the problem from the exchange side? Is there a connection log, or a debug setting, or something I can do to log all of the inbound connections and tell me what's causing exchange to drop them?

  Read the article

• (Some) security perms in WinXP corrupted (shows GUID instead of username)

  - by Andy

  I've been using my Win XP machine (part of a domain) over the holiday period, so until yesterday it hadn't rebooted for about five days. I used it yesterday perfectly fine and shut it down. When I switched it on this morning the majority (but not all) of my shortcut links in the Quick Launch toolbar showed as generic file icons. If you open the folder and get properties on one of the failing shortcuts it says ''Target type: This is not a valid shortcut''. Then in Outlook I noticed my signature wasn't showing (I checked my sent folder and the sig was ok yesterday). Checking the signature folder, I can't see the security tab on any of the sig files, and I have an access denied message on trying to open them. I can see the security tab on the signature folder itself, just none of the contents. If I try and use the parent folder's security tab and ''Replace permission entries on all child objects with entries shown here that apply to child objects'' it appears to work fine, but makes no actual difference. I logged in as administrator and saw that the owner of the files showed up as a GUID (clearly should've been my account in its place). Any ideas what might have made that happen? So far I haven't heard any similar complaints from anyone else at the office...

  Read the article

• User Group Policy in Server 2008 to set Default Profile settings

  - by Chris

  I have computers to deploy and want to apply changes to the default user policy on these PCs automatically. What's the best way to do this? Our current procedure is: Create the computer account in an OU called "Deployment" on our server Unbox the PC Login as the user who will be receiving the PC Change settings (pre-configure outlook, authorize Office, etc.) move computer account to correct OU Place the PC on the users desk. I would like to make as many of the changes in step #4 with Group Policies applied to the Deployment OU if possible since they're largely repeated for every computer. There are a dozen policies created and the computer ones apply correctly but the user policies do not. I understand this is because the end user is not in our "Deployment" OU. I don't want to apply these settings to the user at their current station just the new PC I'm working on. I believe I have the desired effect with Group Policy Loopback Replace enabled on policies that need user policies changed but this just feels wrong/inefficient/complicated to maintain. Am I doing this correctly? Is Group Policy Loopback the only way to change user accounts on one computer? What do you do to setup a user on a new PC?

  Read the article

• Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

  - by Synetech

  I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• Debugging methods for Windows XP hangups

  - by Cooper

  I experience occasional 'freezes' on my desktop machine (Windows XP SP3). I've tried the normal debugging methods I know (watching Process Explorer, running ProcMon (hard to get a good trace because the hangups are so intermittent). Are there any additional system debugging methods that might be useful in discovering what would cause these hang ups? While this question is more about debugging methods than the actual issue itself (which is probably more of a superuser question), the symptoms of the hangup are: All windows become non-responding. Can be brought the foreground, but do not repaint. Taskbar/explorer windows are non-responsive Ctrl+Alt+Del, Ctrl+Shift+Esc, Win+L, do not do anything (though the actions are queued up, and when the system unhangs, they are performed) Oddly enough, usually I can still scroll through the current page I have open in Google Chrome, but I cannot change tabs. Hangup can happen when I have tons of apps open, but also when I only have Outlook, Chrome, and MS Communicator (plus all the corporate spyware). Usually the hang lasts between 30sec and 3 minutes or so. After which I can continue working as usual.

  Read the article

• SSO to multiple websites from Sharepoint website

  - by Aico

  We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

  Read the article

• Downloading Emails locally with Thunderbird

  - by r_honey

  I am using Gmail (web interface) for sometime now, and have well over 20 labels and some thousand mails there archived to different labels in Gmail. Now I want to have a local copy of all my mails and following points are important in the context: The Primary mail access mechanism would continue to be Gmail web for me. I just want a backup of my mail account locally. Ideally the mails should download locally in folders named after Gmail labels (I know this is possible via IMAP but probably not by POP) After all my mails are available locally, I will delete most of them in Gmail to free up space and because I want to archive them. The mails should continue to exist locally and should not be deleted when I delete when from Gmail web interface. I would be syncing my gmail account locally let's say every month. So, the new mails that I have sent/received during this period should come over to my local mailbox in the folders named after Gmail labels. I do understand that Gmail maintains a single copy of email having 2 different labels and such email would get duplicated locally in the 2 folders and I am okay with that. Essentially you can see I just want to archive my mails from the Gmail server to a local backup and then sync (one way from Gmail to locally) new mails at regular intervals. For some points above, POP seems to be the option while IMAP seems for the others. I am really confused and need help in deciding which of POP or IMAP would suit me best. I have currently chosen Thunderbird to be my local email client but would not have a problem switching to Outlook or anything else as long as I get my desired archiving functionality.

  Read the article

• What is the best Battleship AI?

  - by John Gietzen

  Battleship! Back in 2003, (when I was 17,) I competed in a Battleship AI coding competition. Even though I lost that tournament, I had a lot of fun and learned a lot from it. Now, I would like to resurrect this competition, in the search of the best battleship AI. Here is the framework: Battleship.zip The winner will be awarded +450 reputation! The competition will be held starting on the 17th of November, 2009. No entries or edits later than zero-hour on the 17th will be accepted. (Central Standard Time) Submit your entries early, so you don't miss your opportunity! To keep this OBJECTIVE, please follow the spirit of the competition. Rules of the game: The game is be played on a 10x10 grid. Each competitor will place each of 5 ships (of lengths 2, 3, 3, 4, 5) on their grid. No ships may overlap, but they may be adjacent. The competitors then take turns firing single shots at their opponent. A variation on the game allows firing multiple shots per volley, one for each surviving ship. The opponent will notify the competitor if the shot sinks, hits, or misses. Game play ends when all of the ships of any one player are sunk. Rules of the competition: The spirit of the competition is to find the best Battleship algorithm. Anything that is deemed against the spirit of the competition will be grounds for disqualification. Interfering with an opponent is against the spirit of the competition. Multithreading may be used under the following restrictions: No more than one thread may be running while it is not your turn. (Though, any number of threads may be in a "Suspended" state). No thread may run at a priority other than "Normal". Given the above two restrictions, you will be guaranteed at least 3 dedicated CPU cores during your turn. A limit of 1 second of CPU time per game is allotted to each competitor on the primary thread. Running out of time results in losing the current game. Any unhandled exception will result in losing the current game. Network access and disk access is allowed, but you may find the time restrictions fairly prohibitive. However, a few set-up and tear-down methods have been added to alleviate the time strain. Code should be posted on stack overflow as an answer, or, if too large, linked. Max total size (un-compressed) of an entry is 1 MB. Officially, .Net 2.0 / 3.5 is the only framework requirement. Your entry must implement the IBattleshipOpponent interface. Scoring: Best 51 games out of 101 games is the winner of a match. All competitors will play matched against each other, round-robin style. The best half of the competitors will then play a double-elimination tournament to determine the winner. (Smallest power of two that is greater than or equal to half, actually.) I will be using the TournamentApi framework for the tournament. The results will be posted here. If you submit more than one entry, only your best-scoring entry is eligible for the double-elim. Good luck! Have fun! EDIT 1: Thanks to Freed, who has found an error in the Ship.IsValid function. It has been fixed. Please download the updated version of the framework. EDIT 2: Since there has been significant interest in persisting stats to disk and such, I have added a few non-timed set-up and tear-down events that should provide the required functionality. This is a semi-breaking change. That is to say: the interface has been modified to add functions, but no body is required for them. Please download the updated version of the framework. EDIT 3: Bug Fix 1: GameWon and GameLost were only getting called in the case of a time out. Bug Fix 2: If an engine was timing out every game, the competition would never end. Please download the updated version of the framework. EDIT 4: Results!

  Read the article

• Cannot connect to one of my WCF services, not even with telnet

  - by Ecyrb

  I have six wcf services that I'm hosting in a windows service. Everything works great on my machine (Windows 7) but when I try it in production (Windows Server 2003) I cannot connect to one of my six services, ReportsService. I figured I must have a typo, but everything looks right. I've even rewritten that section of the config file just to be sure. I've turned on WCF tracing, but it never shows the call to my service; nothing helpful in there. I tried connecting to the port (9005) with telnet, but it failed. I can connect to all other services (ports 9001-4 and 9006) just fine. I thought that maybe there was a problem with port 9005, so I changed it to 9007 and still couldn't connect. I had one of my working services host on 9005 and it actually worked fine. So I'm pretty sure there's nothing wrong with the port or any firewall settings. Whatever port I tell ReportsService to use fails. Now I'm out of ideas. It seems like it's not hosting that one service, but I cannot get any information about why or what's wrong. Any ideas on what I could try to get that information? Or what might be wrong? The unhandled System.ServiceModel.EndpointNotFoundException I get when running my client is: Could not connect to net.tcp://localhost:9005/ReportsService. The connection attempt lasted for a time span of 00:00:01.0937430. TCP error code 10061: No connection could be made because the target machine actively refused it 172.0.0.1:9005. . My host's config file contains: <!-- Snipped other services to simplify for you. --> <endpoint binding="netTcpBinding" bindingConfiguration="customTcpBinding" contract="ServiceContracts.IReportsService" /> <endpoint binding="netTcpBinding" bindingConfiguration="customTcpBinding" contract="ServiceContracts.IUpdateData" /> IReportService is the one I'm having trouble with. I get a proxy to IReportsService with the following code, where Server is the name of the hosting machine: return new ChannelFactory<IReportsService>("").CreateChannel(new EndpointAddress(string.Format("net.tcp://{0}:9005/ReportsService", Server))); My client config file contains: <system.serviceModel> <bindings> <netTcpBinding> <binding name="customTcpBinding" maxReceivedMessageSize="2147483647"> <readerQuotas maxNameTableCharCount="2147483647" maxStringContentLength="2147483647"/> <security mode="None"/> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> <serviceThrottling maxConcurrentCalls="30" maxConcurrentInstances="30" maxConcurrentSessions="1000" /> </behavior> </serviceBehaviors> </behaviors> <services> <!-- Snipped other services to simplify for you. --> <service behaviorConfiguration="ServiceBehavior" name="WcfService.ReportsService"> <endpoint address="ReportsService" binding="netTcpBinding" bindingConfiguration="customTcpBinding" contract="ServiceContracts.IReportsService" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:9005" /> </baseAddresses> </host> </service> <service behaviorConfiguration="ServiceBehavior" name="WcfService.UpdateData"> <endpoint address="UpdateData" binding="netTcpBinding" bindingConfiguration="customTcpBinding" contract="ServiceContracts.IUpdateData" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:9006" /> </baseAddresses> </host> </service> </services> </system.serviceModel> I've tried to keep things simple with the code snippets above, but if you would like to see more just ask and I'd be happy to provide anything that'll help.

  Read the article

• How to send mail from ASP.NET with IIS6 SMTP in a dedicated server?

  - by Julio César

  Hi. I'm trying to configure a dedicated server that runs ASP.NET to send mail through the local IIS SMTP server but mail is getting stuck in the Queue folder and doesn't get delivered. I'm using this code in an .aspx page to test: <%@ Page Language="C#" AutoEventWireup="true" %> <% new System.Net.Mail.SmtpClient("localhost").Send("[email protected]", "[email protected]", "testing...", "Hello, world.com"); %> Then, I added the following to the Web.config file: <system.net> <mailSettings> <smtp> <network host="localhost"/> </smtp> </mailSettings> </system.net> In the IIS Manager I've changed the following in the properties of the "Default SMTP Virtual Server". General: [X] Enable Logging Access / Authentication: [X] Windows Integrated Authentication Access / Relay Restrictions: (o) Only the list below, Granted 127.0.0.1 Delivery / Advanced: Fully qualified domain name = thedomain.com Finally, I run the SMTPDiag.exe tool like this: C:\>smtpdiag.exe [email protected] [email protected] Searching for Exchange external DNS settings. Computer name is THEDOMAIN. Failed to connect to the domain controller. Error: 8007054b Checking SOA for gmail.com. Checking external DNS servers. Checking internal DNS servers. SOA serial number match: Passed. Checking local domain records. Checking MX records using TCP: thedomain.com. Checking MX records using UDP: thedomain.com. Both TCP and UDP queries succeeded. Local DNS test passed. Checking remote domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Remote DNS test passed. Checking MX servers listed for [email protected]. Connecting to gmail-smtp-in.l.google.com [209.85.199.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Connecting to gmail-smtp-in.l.google.com [209.85.199.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [209.85.135.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [209.85.135.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt1.gmail-smtp-in.l.google.com [209.85.133.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt1.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [74.125.79.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [74.125.79.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt1.gmail-smtp-in.l.google.com [209.85.133.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt1.gmail-smtp-in.l.google.com. Connecting to gsmtp183.google.com [64.233.183.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gsmtp183.google.com. Connecting to gsmtp147.google.com [209.85.147.27] on port 25. Connecting to the server failed. Error: 10051 Failed to submit mail to gsmtp147.google.com. I'm using ASP.NET 2.0, Windows 2003 Server and the IIS that comes with it. Can you tell me what else to change to fix the problem? Thanks @mattlant This is a dedicated server that's why I'm installing the SMTP manually. EDIT: I use exchange so its a little different, but its called a smart host in exchange, but in plain SMTP service config i think its called something else. Cant remember exactly the setting name. Thank you for pointing me at the Smart host field. Mail is getting delivered now. In the Default SMTP Virtual Server properties, the Delivery tab, click Advanced and fill the "Smart host" field with the address that your provider gives you. In my case (GoDaddy) it was k2smtpout.secureserver.net. More info here: http://help.godaddy.com/article/1283

  Read the article

• Overwrite the Soap Envelope in Suds python

  - by chrissygormley

  Hello, I have a camera and I am trying to connect to it vis suds. I have tried to send raw xml and have found that the only thing stopping the xml suds from working is an incorrect Soap envelope namespace. The envelope namespace is: xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" and I want to rewrite it to: xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope" In order to add a namespace in python I try this code: message = Element('Element_name').addPrefix(p='SOAP-ENC', u='www.w3.org/ENC') But when I add the SOAP-ENV to the namespace it doesn't write as it is hardcoded into the suds bindings. Is there a way to overwrite this in suds? Thanks for any help.

  Read the article

• JPQL cross tab query

  - by Phil

  Hi can anyone tell me if its possible to write a cross tab query in JPQL? (I'm using eclipse link JPA2) An example of a cross tab query in SQL can found here http://onlamp.com/pub/a/onlamp/2003/12/04/crosstabs.html SELECT dept, COUNT(CASE WHEN gender = 'm' THEN id ELSE NULL END) AS m, COUNT(CASE WHEN gender = 'f' THEN id ELSE NULL END) AS f, COUNT(*) AS total FROM person GROUP BY dept How can I do the same thing as a single query in JPQL? Looking at the spec it doesn't seem to look like CASE is valid in COUNT Is there any other way?

  Read the article

• Dynamically populate an InfoPath DropownList with managed code

  - by Jared

  I have an InfoPath form with custom C# code, and a Sharepoint list. I have a dropdownlist in the InfoPath form that I want to populate with a certain field from the Sharepoint list (I want the InfoPath dropdownlist to contain this field's value from every item in the Sharepoint list. I can successfully get the list of values I need from Sharepoint in my managed code, but I do not see how I can get these values into the dropdownlist (either bind to the list, or add each item in the list one by one). I thought I could modify the XML of the dropdownlist to insert my items, but the XML only contains the first item in the dropdownlist: <my:RelatedRiskID xmlns:my="http://schemas.microsoft.com/office/infopath/2003/myXSD/2009-07-20T18:12:59">Option 1</my:RelatedRiskID> I feel like this should be possible, but I can't find any resources on how to do it. Thanks in advance for the help. Jared

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >