server client - Page 267

Microsoft Access to SQL Server - synchronization

- by David Pfeffer

I have a client that uses a point-of-sale solution involving an Access database for its back-end storage. I am trying to provide this client with a service that involves, for SLA reasons, the need to copy parts of this Access database into tables in my own database server which runs SQL Server 2008. I need to do this on a periodic basis, probably about 5 times a day. I do have VPN connectivity to the client. Is there an easy programmatic way to do this, or an available tool? I don't want to handcraft what I assume is a relatively common task.

Read the article

caching in memory on server

- by zaharpopov

I want to write web app with client Javascript and back-end server (Python). Client needs data from server frequently in AJAX way. Data in DB, and expensive to load for each request. However, in desktop app I would just load data from DB once to memory and then access it. In web app - the server code runs each time for request so I can't do it (each run has to load from DB to memory again). How can this work? Can a single process run on server or do I have to use something different here? An example is like auto-complete here on stackoverflow for tags - how is it implemented in the server for fast caching/loading?

Read the article

How do I UPDATE a Linked Server table where "alias" is required, in SQL Server 2000?

- by Mark Hurd

In SQL Server 2005 tablename can be used to distinguish which table you're referring to: UPDATE LinkedServer.database.user.tablename SET val=u.val FROM localtable u WHERE tablename.ID=u.ID In SQL Server 2000 this results in Server: Msg 107, Level 16, State 2 The column prefix 'tablename' does not match with a table name or alias name used in the query. Trying UPDATE LinkedServer.database.user.tablename SET val=u.val FROM localtable u WHERE LinkedServer.database.user.tablename.ID=u.ID results in Server: Msg 117, Level 15, State 2 The number name 'LinkedServer.database.user.tablename' contains more than the maximum number of prefixes. The maximum is 3. And, of course, UPDATE LinkedServer.database.user.tablename SET val=u.val FROM localtable u WHERE ID=u.ID results in Server: Msg 209, Level 16, State 1 Ambiguous column name 'ID'. (In fact searching on "The number name contains more than the maximum number of prefixes. The maximum is 3." I found the answer, but I've typed up this question and I'm going to post it! :-) )

Read the article

Can I add an existing 2008 build server to new TFS 2010 server ?

- by driis

My scenario is this: I am currently testing out a new Team Foundation Server 2010 installation; which we will be moving to shortly. Upgrading builds to work with TFS 2010 and the new MSBuild seems like a lot of work (it does not work out-of-the-box, at least). So what I would like to do, is to repurpose our old TFS Server to be a build server for TFS 2010. It already has build services installed. I cannot figure out how to add an existing TFS 2008 Build Server to my new TFS 2010 installation, so I can use the old server to run old builds. Is this possible ? How can I do it ?

Read the article

Android: heavy traffic on server causes app to force close

- by user522559

I have developed an app to communicate with my own server and published it. However, sometimes the app force closes. I know there is no bug in the code because the app works properly most of the time, but sometimes it is waiting for an answer from the server forever. I think this is due to the fact that so many people are using the app, and the app refreshes every 1 second or so, so this heavy traffic causes the server to take a large amount of time to respond. So how do you take care of such a use case? should I have a use case where if the server does not respond after some time you just stop the app and throw a message saying that the server is not responding or something like that?

Read the article

Does my basic PHP Socket Server need optimization?

- by Tom

Like many people, I can do a lot of things with PHP. One problem I do face constantly is that other people can do it much cleaner, much more organized and much more structured. This also results in much faster execution times and much less bugs. I just finished writing a basic PHP Socket Server (the real core), and am asking you if you can tell me what I should do different before I start expanding the core. I'm not asking about improvements such as encrypted data, authentication or multi-threading. I'm more wondering about questions like "should I maybe do it in a more object oriented way (using PHP5)?", or "is the general structure of the way the script works good, or should some things be done different?". Basically, "is this how the core of a socket server should work?" In fact, I think that if I just show you the code here many of you will immediately see room for improvements. Please be so kind to tell me. Thanks! #!/usr/bin/php -q <? // config $timelimit = 180; // amount of seconds the server should run for, 0 = run indefintely $address = $_SERVER['SERVER_ADDR']; // the server's external IP $port = 9000; // the port to listen on $backlog = SOMAXCONN; // the maximum of backlog incoming connections that will be queued for processing // configure custom PHP settings error_reporting(1); // report all errors ini_set('display_errors', 1); // display all errors set_time_limit($timelimit); // timeout after x seconds ob_implicit_flush(); // results in a flush operation after every output call //create master IPv4 based TCP socket if (!($master = socket_create(AF_INET, SOCK_STREAM, SOL_TCP))) die("Could not create master socket, error: ".socket_strerror(socket_last_error())); // set socket options (local addresses can be reused) if (!socket_set_option($master, SOL_SOCKET, SO_REUSEADDR, 1)) die("Could not set socket options, error: ".socket_strerror(socket_last_error())); // bind to socket server if (!socket_bind($master, $address, $port)) die("Could not bind to socket server, error: ".socket_strerror(socket_last_error())); // start listening if (!socket_listen($master, $backlog)) die("Could not start listening to socket, error: ".socket_strerror(socket_last_error())); //display startup information echo "[".date('Y-m-d H:i:s')."] SERVER CREATED (MAXCONN: ".SOMAXCONN.").\n"; //max connections is a kernel variable and can be adjusted with sysctl echo "[".date('Y-m-d H:i:s')."] Listening on ".$address.":".$port.".\n"; $time = time(); //set startup timestamp // init read sockets array $read_sockets = array($master); // continuously handle incoming socket messages, or close if time limit has been reached while ((!$timelimit) or (time() - $time < $timelimit)) { $changed_sockets = $read_sockets; socket_select($changed_sockets, $write = null, $except = null, null); foreach($changed_sockets as $socket) { if ($socket == $master) { if (($client = socket_accept($master)) < 0) { echo "[".date('Y-m-d H:i:s')."] Socket_accept() failed, error: ".socket_strerror(socket_last_error())."\n"; continue; } else { array_push($read_sockets, $client); echo "[".date('Y-m-d H:i:s')."] Client #".count($read_sockets)." connected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; } } else { $data = @socket_read($socket, 1024, PHP_NORMAL_READ); //read a maximum of 1024 bytes until a new line has been sent if ($data === false) { //the client disconnected $index = array_search($socket, $read_sockets); unset($read_sockets[$index]); socket_close($socket); echo "[".date('Y-m-d H:i:s')."] Client #".($index-1)." disconnected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; } else { if ($data = trim($data)) { //remove whitespace and continue only if the message is not empty switch ($data) { case "exit": //close connection when exit command is given $index = array_search($socket, $read_sockets); unset($read_sockets[$index]); socket_close($socket); echo "[".date('Y-m-d H:i:s')."] Client #".($index-1)." disconnected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; break; default: //for experimental purposes, write the given data back socket_write($socket, "\n you wrote: ".$data); } } } } } } socket_close($master); //close the socket echo "[".date('Y-m-d H:i:s')."] SERVER CLOSED.\n"; ?>

Read the article

Rename Exchange Server 2003 Domain

- by Debasish Pramanik

Hi All: We have the following exchange server deployment Windows 2003 Server + Domain Controller + Exchange Server 2003 The domain name was X.COM. everything was working fine but due to some reason we need to rename the domain name to Y.COM. The rename of Domain went well but the rename of Exchange Server 2003 is having issues. When we run the XDR-Fixup we get the following error Operation failed: Could not get 'configurationNamingContext' on RootDSE of this server. Let me know if you have any idea on this.

Read the article

How do I download an attachment from an annotation using client-side JScript?

- by VVander

I'm trying to provide a link to the attachment of a note through the client-side JScript. The standard MS-made Notes component does this through the following url: [serverurl]/[appname]/Activities/Attachment/download.aspx?AttachmentType=5&AttachmentId={blahblahblah}&IsNotesTabAttachment=1&CRMWRPCToken=blahblahblah&CRMWRPCTokenTimeStamp=blahblahblah The problem is that I don't know how to get the Token or TokenTimeStamp, so I'm receiving an Access Denied error ("form is no longer available, security precaution, etc"). The only other way I can think of doing this is through the OData endpoint, but that would at best get me a base64 string that I still would have translate into a filestream to give to the browser (all of which seems like it would take forever to implement/figure out). I've found a few other posts that describe the same thing, but no one has answered them: http://social.microsoft.com/Forums/en-US/crmdevelopment/thread/6eb9e0d4-0c0c-4769-ab36-345fbfc9754f/ http://social.microsoft.com/Forums/is/crm/thread/45dabb6e-1c6c-4cb4-85a4-261fa58c04da

Read the article

Designing server communications like DNS

- by fryme

I'm just need some help about server design. I need help in the design of the structure of the server application. Need to develop a network of servers that interact with each other. If a server receives a request and the server can not comply it, then the request is sent to another server and the result will be refunded to the sender. Information on all servers is different, and sender did not know where the result is placed in. The first thing that comes to mind is to use the model(scheme) of the DNS. But any interesting detailed articles on this subject I have not found. Any ideas?

Read the article

Syncronise Server Seconds with JS Clients

- by imperium2335

I would like to drive a setTimeout loop based on the time of the server, seconds only. So when the seconds on the server is 30, some function is run on all clients. It is vital that they do not become totally out of sync with the server, as there will be a CRON job running on the server every, say, 45 seconds which is important to the system functioning correctly. It is ok if a client is out by a few seconds with the server, client do not need to be synced to each other. I am using Jquery library. Hope this makes sense!

Read the article

Spring server start-up event

- by jia

i am facing a problem. I am using tomcat server for my spring maven project and i want to subscribe my application to facebook once when server starts up. I have tried ApplicationListener ContextRefreshedEvent. It gets invoked on application context initialization, but the issue is at that time my server has not completely started and hence my application is not publically accessible which is required in my case as facebook subscription requires verification using application public URL. So i want to do subscription when my server gets started completey and not on application context initialization. Any idea how can i do it? Do i have nay application level event listener that can tell me that server has started completely? Regards jia

Read the article

Deploying WPF applications with SQL Server

- by SiN

Ok so I'm developing a WPF application that makes heavy use of SQL Server. I've been asked to create an installer package that checks whether the client already has SQL Server Express 2005 already installed, his operating system (64bit Vs x86) and install the required SQL Server instance if needed. I'm then required to automatically map my App.config's connection string to the SQL Server's connection string and run a script to create my database. Is it just me, or does this look like a lot of hard work? Any idea where to start? Edit: Ok should I move to SQL Server Compact edition? Thanks!

Read the article

Facing problem in configuring Reporting Server

- by idrees99

Hi all, I am using Sql server 2005 express edition and i want to Install and configure Reporting server on my local machine.Now i have installed the reporting server but the issue is that i am unable to configure it properly.when ever i go to start the reporting services it gives me the following message: THE SQL SERVER REPORTING SERVICE(SQLEXPRESS)service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts service. I am using WindowsXp Professional. plz help me out as i have just started using sql server and i dont have any idea.

Read the article

Reliable way of generating unique hardware ID

- by mr.b

Question: what's the best way to accomplish following. I have to come up with unique ID for each networked client, such that: it (ID) should persist once client software is installed on target computer, and should continue to persist if software is re-installed on same computer and same OS installment, it should not change if hardware configuration is modified in most ways (except changing the motherboard) When hard drive with client software installed is cloned to another computer with identical hardware configuration (or, as similar as possible), client software should be aware of that change. A little bit of explanation and some back-story: This question is basically age old question that also touches topic of software copy-protection, as some of mechanisms used in that area are mentioned here. I should be clear at this point that I'm not looking for a copy-protection scheme. Please, read on. :) I'm working on a client-server software that is supposed to work in local network. One of problems I have to solve is to identify each unique client in network (not so much of a problem), so that I can apply certain attributes to every specific client, retain and enforce those attributes during deployment lifetime of a specific client. While I was looking for a solution, I was aware of following: Windows activation system uses some kind of heavy fingerprinting mechanism, that is extremely sensitive to hardware modifications, Disk imaging software copies along all Volume IDs (tied to each partition when formatted), and custom, uniquely generated IDs during installation process, during first run, or in any other way, that is strictly software in its nature, and stored in registry or on hard drive, so it's very easy to confuse two Obvious choice for this kind of problem would be to find out BIOS identifiers (not 100% sure if this is unique through identical motherboard models, though), as that's the only thing I can rely on, that isn't duplicated, transferred by cloning, and that can't be changed (at least not by using some user-space program). Everything else fails as either being not reliable (MAC cloning, anyone?), or too demanding (in terms that it's too sensitive to configuration changes). Am I missing something obvious here? Sub-question that I'd like to ask is, am I doing it correctly, architecture-wise? Perhaps there is a better tool for task that I have to accomplish... Another approach I had in mind is something similar to handshake mechanism, where server maintains internal lookup table of connected client IDs (which can be even completely software-based and non-unique at any given moment), and tells client to come up with different ID during handshake, if duplicate ID is provided upon connection. That approach, unfortunately, doesn't play nicely with one of requirements to tie attributes to specific client during lifetime.

Read the article

Gridview Datasource Server error

- by salvationishere

I am developing a C# VS 2008 and SQL Server 2008 website. However, I get the below error now when I first run this: The DataSourceID of 'GridView1' must be the ID of a control of type IDataSource. A control with ID 'AdventureWorks3.mdf' could not be found What is causing this error? Here is my default.aspx file. I have configured GridView1 to use my AdventureWorks3.mdf file, stored in my App_Data folder. Do I need to add this folder name to this ASPX file? <%@ Page Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="MainContent" Runat="Server"> <asp:Panel runat="server" ID="AuthenticatedMessagePanel"> <asp:Label runat="server" ID="WelcomeBackMessage"></asp:Label> <table> <tr > <td> <asp:Label ID="tableLabel" runat="server" Font-Bold="True" Text="Select target table:"></asp:Label> </td> <td> <asp:Label ID="inputLabel" runat="server" Font-Bold="True" Text="Select input file:"></asp:Label> </td></tr> <tr><td valign="top"> <asp:Label ID="feedbackLabel" runat="server"></asp:Label> <asp:GridView ID="GridView1" runat="server" style="WIDTH: 400px;" CellPadding="4" ForeColor="#333333" GridLines="None" onselectedindexchanged="GridView1_SelectedIndexChanged" AutoGenerateSelectButton="True" DataSourceID="AdventureWorks3.mdf" > <RowStyle BackColor="#F7F6F3" ForeColor="#333333" /> <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /> <SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" /> <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <EditRowStyle BackColor="#999999" /> <AlternatingRowStyle BackColor="White" ForeColor="#284775" /> </asp:GridView> </td> <td valign="top"> <input id="uploadFile" type="file" size="26" runat="server" name="uploadFile" title="UploadFile" class="greybar" enableviewstate="True" /> </td></tr> </table> </asp:Panel> <asp:Panel runat="Server" ID="AnonymousMessagePanel"> <asp:HyperLink runat="server" ID="lnkLogin" Text="Log In" NavigateUrl="~/Login.aspx"> </asp:HyperLink> </asp:Panel> </asp:Content> Or what about my ASPX.CS file? Is this the problem? using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Collections.Generic; using System.IO; using System.Drawing; using System.ComponentModel; using System.Data.SqlClient; using ADONET_namespace; using System.Security.Principal; //using System.Windows; public partial class _Default : System.Web.UI.Page //namespace AddFileToSQL { //protected System.Web.UI.HtmlControls.HtmlInputFile uploadFile; protected System.Web.UI.HtmlControls.HtmlInputButton btnOWrite; protected System.Web.UI.HtmlControls.HtmlInputButton btnAppend; protected System.Web.UI.WebControls.Label Label1; protected static string inputfile = ""; public static string targettable; public static string selection; // Number of controls added to view state protected int default_NumberOfControls { get { if (ViewState["default_NumberOfControls"] != null) { return (int)ViewState["default_NumberOfControls"]; } else { return 0; } } set { ViewState["default_NumberOfControls"] = value; } } protected void uploadFile_onclick(object sender, EventArgs e) { } protected void Load_GridData() { GridView1.DataSource = ADONET_methods.DisplaySchemaTables(); GridView1.DataBind(); } protected void btnOWrite_Click(object sender, EventArgs e) { if (uploadFile.PostedFile.ContentLength > 0) { feedbackLabel.Text = "You do not have sufficient access to overwrite table records."; } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void btnAppend_Click(object sender, EventArgs e) { string fullpath = Page.Request.PhysicalApplicationPath; string path = uploadFile.PostedFile.FileName; if (File.Exists(path)) { // Create a file to write to. try { StreamReader sr = new StreamReader(path); string s = ""; while (sr.Peek() > 0) s = sr.ReadLine(); sr.Close(); } catch (IOException exc) { Console.WriteLine(exc.Message + "Cannot open file."); return; } } if (uploadFile.PostedFile.ContentLength > 0) { inputfile = System.IO.File.ReadAllText(path); Session["Message"] = inputfile; Response.Redirect("DataMatch.aspx"); } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void Page_Load(object sender, EventArgs e) { if (Request.IsAuthenticated) { WelcomeBackMessage.Text = "Welcome back, " + User.Identity.Name + "!"; // Reference the CustomPrincipal / CustomIdentity CustomIdentity ident = User.Identity as CustomIdentity; if (ident != null) WelcomeBackMessage.Text += string.Format(" You are the {0} of {1}.", ident.Title, ident.CompanyName); AuthenticatedMessagePanel.Visible = true; AnonymousMessagePanel.Visible = false; //if (!Page.IsPostBack) //{ // Load_GridData(); //} } else { AuthenticatedMessagePanel.Visible = false; AnonymousMessagePanel.Visible = true; } } protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { GridViewRow row = GridView1.SelectedRow; targettable = row.Cells[2].Text; } }

Read the article

Quick guide to Oracle IRM 11g: Server installation

- by Simon Thorpe

Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

Read the article

Automating Solaris 11 Zones Installation Using The Automated Install Server

- by Orgad Kimchi

Introduction How to use the Oracle Solaris 11 Automated install server in order to automate the Solaris 11 Zones installation. In this document I will demonstrate how to setup the Automated Install server in order to provide hands off installation process for the Global Zone and two Non Global Zones located on the same system. Architecture layout: Figure 1. Architecture layout Prerequisite Setup the Automated install server (AI) using the following instructions “How to Set Up Automated Installation Services for Oracle Solaris 11” The first step in this setup will be creating two Solaris 11 Zones configuration files. Step 1: Create the Solaris 11 Zones configuration files The Solaris Zones configuration files should be in the format of the zonecfg export command. # zonecfg -z zone1 export > /var/tmp/zone1# cat /var/tmp/zone1 create -b set brand=solaris set zonepath=/rpool/zones/zone1 set autoboot=true set ip-type=exclusive add anet set linkname=net0 set lower-link=auto set configure-allowed-address=true set link-protection=mac-nospoof set mac-address=random end Create a backup copy of this file under a different name, for example, zone2. # cp /var/tmp/zone1 /var/tmp/zone2 Modify the second configuration file with the zone2 configuration information You should change the zonepath for example: set zonepath=/rpool/zones/zone2 Step2: Copy and share the Zones configuration files Create the NFS directory for the Zones configuration files # mkdir /export/zone_config Share the directory for the Zones configuration file # share –o ro /export/zone_config Copy the Zones configuration files into the NFS shared directory # cp /var/tmp/zone1 /var/tmp/zone2 /export/zone_config Verify that the NFS share has been created using the following command # share export_zone_config /export/zone_config nfs sec=sys,ro Step 3: Add the Global Zone as client to the Install Service Use the installadm create-client command to associate client (Global Zone) with the install service To find the MAC address of a system, use the dladm command as described in the dladm(1M) man page. The following command adds the client (Global Zone) with MAC address 0:14:4f:2:a:19 to the s11x86service install service. # installadm create-client -e “0:14:4f:2:a:19" -n s11x86service You can verify the client creation using the following command # installadm list –c Service Name Client Address Arch Image Path ------------ -------------- ---- ---------- s11x86service 00:14:4F:02:0A:19 i386 /export/auto_install/s11x86service We can see the client install service name (s11x86service), MAC address (00:14:4F:02:0A:19 and Architecture (i386). Step 4: Global Zone manifest setup First, get a list of the installation services and the manifests associated with them: # installadm list -m Service Name Manifest Status ------------ -------- ------ default-i386 orig_default Default s11x86service orig_default Default Then probe the s11x86service and the default manifest associated with it. The -m switch reflects the name of the manifest associated with a service. Since we want to capture that output into a file, we redirect the output of the command as follows: # installadm export -n s11x86service -m orig_default > /var/tmp/orig_default.xml Create a backup copy of this file under a different name, for example, orig-default2.xml, and edit the copy. # cp /var/tmp/orig_default.xml /var/tmp/orig_default2.xml Use the configuration element in the AI manifest for the client system to specify non-global zones. Use the name attribute of the configuration element to specify the name of the zone. Use the source attribute to specify the location of the config file for the zone.The source location can be any http:// or file:// location that the client can access during installation. The following sample AI manifest specifies two Non-Global Zones: zone1 and zone2 You should replace the server_ip with the ip address of the NFS server. <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install> <ai_instance> <target> <logical> <zpool name="rpool" is_root="true"> <filesystem name="export" mountpoint="/export"/> <filesystem name="export/home"/> <be name="solaris"/> </zpool> </logical> </target> <software type="IPS"> <source> <publisher name="solaris"> <origin name="http://pkg.oracle.com/solaris/release"/> </publisher> </source> <software_data action="install"> <name>pkg:/entire@latest</name> <name>pkg:/group/system/solaris-large-server</name> </software_data> </software> <configuration type="zone" name="zone1" source="file:///net/server_ip/export/zone_config/zone1"/> <configuration type="zone" name="zone2" source="file:///net/server_ip/export/zone_config/zone2"/> </ai_instance> </auto_install> The following example adds the /var/tmp/orig_default2.xml AI manifest to the s11x86service install service # installadm create-manifest -n s11x86service -f /var/tmp/orig_default2.xml -m gzmanifest You can verify the manifest creation using the following command # installadm list -n s11x86service -m Service/Manifest Name Status Criteria --------------------- ------ -------- s11x86service orig_default Default None gzmanifest Inactive None We can see from the command output that the new manifest named gzmanifest has been created and associated with the s11x86service install service. Step 5: Non Global Zone manifest setup The AI manifest for non-global zone installation is similar to the AI manifest for installing the global zone. If you do not provide a custom AI manifest for a non-global zone, the default AI manifest for Zones is used The default AI manifest for Zones is available at /usr/share/auto_install/manifest/zone_default.xml. In this example we should use the default AI manifest for zones The following sample default AI manifest for zones # cat /usr/share/auto_install/manifest/zone_default.xml <?xml version="1.0" encoding="UTF-8"?>  <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install> <ai_instance name="zone_default"> <target> <logical> <zpool name="rpool">  <filesystem name="export" mountpoint="/export"/> <filesystem name="export/home"/> <be name="solaris"> <options> <option name="compression" value="on"/> </options> </be> </zpool> </logical> </target> <software type="IPS"> <destination> <image>  <facet set="false">facet.locale.*</facet> <facet set="true">facet.locale.de</facet> <facet set="true">facet.locale.de_DE</facet> <facet set="true">facet.locale.en</facet> <facet set="true">facet.locale.en_US</facet> <facet set="true">facet.locale.es</facet> <facet set="true">facet.locale.es_ES</facet> <facet set="true">facet.locale.fr</facet> <facet set="true">facet.locale.fr_FR</facet> <facet set="true">facet.locale.it</facet> <facet set="true">facet.locale.it_IT</facet> <facet set="true">facet.locale.ja</facet> <facet set="true">facet.locale.ja_*</facet> <facet set="true">facet.locale.ko</facet> <facet set="true">facet.locale.ko_*</facet> <facet set="true">facet.locale.pt</facet> <facet set="true">facet.locale.pt_BR</facet> <facet set="true">facet.locale.zh</facet> <facet set="true">facet.locale.zh_CN</facet> <facet set="true">facet.locale.zh_TW</facet> </image> </destination> <software_data action="install"> <name>pkg:/group/system/solaris-small-server</name> </software_data> </software> </ai_instance> </auto_install> (optional) We can customize the default AI manifest for Zones Create a backup copy of this file under a different name, for example, zone_default2.xml and edit the copy # cp /usr/share/auto_install/manifest/zone_default.xml /var/tmp/zone_default2.xml Edit the copy (/var/tmp/zone_default2.xml) The following example adds the /var/tmp/zone_default2.xml AI manifest to the s11x86service install service and specifies that zone1 and zone2 should use this manifest. # installadm create-manifest -n s11x86service -f /var/tmp/zone_default2.xml -m zones_manifest -c zonename="zone1 zone2" Note: Do not use the following elements or attributes in a non-global zone AI manifest: The auto_reboot attribute of the ai_instance element The http_proxy attribute of the ai_instance element The disk child element of the target element The noswap attribute of the logical element The nodump attribute of the logical element The configuration element Step 6: Global Zone profile setup We are going to create a global zone configuration profile which includes the host information for example: host name, ip address name services etc… # sysconfig create-profile –o /var/tmp/gz_profile.xml You need to provide the host information for example: Default router Root password DNS information The output should eventually disappear and be replaced by the initial screen of the System Configuration Tool (see Figure 2), where you can do the final configuration. Figure 2. Profile creation menu You can validate the profile using the following command # installadm validate -n s11x86service –P /var/tmp/gz_profile.xml Validating static profile gz_profile.xml... Passed Next, instantiate a profile with the install service. In our case, use the following syntax for doing this # installadm create-profile -n s11x86service -f /var/tmp/gz_profile.xml -p gz_profile You can verify profile creation using the following command # installadm list –n s11x86service -p Service/Profile Name Criteria -------------------- -------- s11x86service gz_profile None We can see that the gz_profie has been created and associated with the s11x86service Install service. Step 7: Setup the Solaris Zones configuration profiles The step should be similar to the Global zone profile creation on step 6 # sysconfig create-profile –o /var/tmp/zone1_profile.xml # sysconfig create-profile –o /var/tmp/zone2_profile.xml You can validate the profiles using the following command # installadm validate -n s11x86service -P /var/tmp/zone1_profile.xml Validating static profile zone1_profile.xml... Passed # installadm validate -n s11x86service -P /var/tmp/zone2_profile.xml Validating static profile zone2_profile.xml... Passed Next, associate the profiles with the install service The following example adds the zone1_profile.xml configuration profile to the s11x86service install service and specifies that zone1 should use this profile. # installadm create-profile -n s11x86service -f /var/tmp/zone1_profile.xml -p zone1_profile -c zonename=zone1 The following example adds the zone2_profile.xml configuration profile to the s11x86service install service and specifies that zone2 should use this profile. # installadm create-profile -n s11x86service -f /var/tmp/zone2_profile.xml -p zone2_profile -c zonename=zone2 You can verify the profiles creation using the following command # installadm list -n s11x86service -p Service/Profile Name Criteria -------------------- -------- s11x86service zone1_profile zonename = zone1 zone2_profile zonename = zone2 gz_profile None We can see that we have three profiles in the s11x86service install service Global Zone gz_profile zone1 zone1_profile zone2 zone2_profile. Step 8: Global Zone setup Associate the global zone client with the manifest and the profile that we create in the previous steps The following example adds the manifest and profile to the client (global zone), where: gzmanifest is the name of the manifest. gz_profile is the name of the configuration profile. mac="0:14:4f:2:a:19" is the client (global zone) mac address s11x86service is the install service name. # installadm set-criteria -m gzmanifest –p gz_profile -c mac="0:14:4f:2:a:19" -n s11x86service You can verify the manifest and profile association using the following command # installadm list -n s11x86service -p -m Service/Manifest Name Status Criteria --------------------- ------ -------- s11x86service gzmanifest mac = 00:14:4F:02:0A:19 orig_default Default None Service/Profile Name Criteria -------------------- -------- s11x86service gz_profile mac = 00:14:4F:02:0A:19 zone2_profile zonename = zone2 zone1_profile zonename = zone1 Step 9: Provision the host with the Non-Global Zones The next step is to boot the client system off the network and provision it using the Automated Install service that we just set up. First, boot the client system. Figure 3 shows the network boot attempt (when done on an x86 system): Figure 3. Network Boot Then you will be prompted by a GRUB menu, with a timer, as shown in Figure 4. The default selection (the "Text Installer and command line" option) is highlighted. Press the down arrow to highlight the second option labeled Automated Install, and then press Enter. The reason we need to do this is because we want to prevent a system from being automatically re-installed if it were to be booted from the network accidentally. Figure 4. GRUB Menu What follows is the continuation of a networked boot from the Automated Install server,. The client downloads a mini-root (a small set of files in which to successfully run the installer), identifies the location of the Automated Install manifest on the network, retrieves that manifest, and then processes it to identify the address of the IPS repository from which to obtain the desired software payload. Non-Global Zones are installed and configured on the first reboot after the Global Zone is installed. You can list all the Solaris Zones status using the following command # zoneadm list -civ Once the Zones are in running state you can login into the Zone using the following command # zlogin –z zone1 Troubleshooting Automated Installations If an installation to a client system failed, you can find the client log at /system/volatile/install_log. NOTE: Zones are not installed if any of the following errors occurs: A zone config file is not syntactically correct. A collision exists among zone names, zone paths, or delegated ZFS datasets in the set of zones to be installed Required datasets are not configured in the global zone. For more troubleshooting information see “Installing Oracle Solaris 11 Systems” Conclusion This paper demonstrated the benefits of using the Automated Install server to simplify the Non Global Zones setup, including the creation and configuration of the global zone manifest and the Solaris Zones profiles.

Read the article

Adding UCM as a search source in Windows Explorer

- by kyle.hatlestad

A customer recently pointed out to me that Windows 7 supports federated search within Windows Explorer. This means you can perform searches to external sources such as Google, Flickr, YouTube, etc right from within Explorer. While we do have the Desktop Integration Suite which offers searching within Explorer, I thought it would be interesting to look into this method which would not require any client software to implement. Basically, federated searching hooks up in Windows Explorer through the OpenSearch protocol. A Search Connector Descriptor file is run and it installs the search provider. The file is a .osdx file which is an OpenSearch Description document. It describes the search provider you are hooking up to along with the URL for the query. If those results can come back as an RSS or ATOM feed, then you're all set. So the first step is to install the RSS Feeds component from the UCM Samples page on OTN. If you're on 11g, I've found the RSS Feeds works just fine on that version too. Next, you want to perform a Quick Search with a particular search term and then copy the RSS link address for that search result. Here is what an example URL might looks like: http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3cqsch%3eoracle%3c%2fqsch %3e+%29&SortField=dInDate&SortOrder=Desc&ResultCount=20&SearchQueryFormat= Universal&SearchProviders=server& Now you want to create a new text file and start out with this information: <?xml version="1.0" encoding="UTF-8"?><OpenSearchDescription xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName></ShortName> <Description></Description> <Url type="application/rss+xml" template=""/> <Url type="text/html" template=""/> </OpenSearchDescription> Enter a ShortName and Description. The ShortName will be the value used when displaying the search provider in Explorer. In the template attribute for the first Url element, enter the URL copied previously. You will then need to convert the ampersand symbols to '&' to make them XML compliant. Finally, you'll want to switch out the search term with '{searchTerms}'. For the second Url element, you can do the same thing except you want to copy the UCM search results URL from the page of results. That URL will look something like: http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3Eoracle%3C%2Fqsch%3E&listTemplateId= &ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection= &MiniSearchText=oracle Again, convert the ampersand symbols and replace the search term with '{searchTerms}'. When complete, save the file with the .osdx extension. The completed file should look like: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/" xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName>Universal Content Management</ShortName> <Description>OpenSearch for UCM via Windows 7 Search Federation.</Description> <Url type="application/rss+xml" template="http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3Cqsch%3E{searchTerms}%3C%2fqsch%3E+%29&SortField=dInDate&SortOrder=Desc&ResultCount=200&SearchQueryFormat=Universal"/> <Url type="text/html" template="http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3E{searchTerms}%3C%2Fqsch%3E&listTemplateId=&ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection=&MiniSearchText={searchTerms}"/> </OpenSearchDescription> After you save the file, simply double-click it to create the provider. It will ask if you want to add the search connector to Windows. Click Add and it will add it to the Searches folder in your user folder as well as your Favorites. Now just click on the search icon and in the upper right search box, enter your term. As you are typing, it begins executing searches and the results will come back in Explorer. Now when you double-click on an item, it will try and download the web viewable for viewing. You also have the ability to save the search, just as you would in UCM. And there is a link to Search On Website which will launch your browser and go directly to the search results page there. And with some tweaks to the RSS component, you can make the results a bit more interesting. It supports the Media RSS standard, so you can pass along the thumbnail of the documents in the results. To enable this, edit the rss_resources.htm file in the RSS Feeds component. In the std_rss_feed_begin resource include, add the namespace 'xmlns:media="http://search.yahoo.com/mrss/' to the rss definition: <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:media="http://search.yahoo.com/mrss/"> Next, in the rss_channel_item_with_thumb include, below the closing image element, add this element: </images> <media:thumbnail url="<$if strIndexOf(thumbnailUrl, "@t") > 0 or strIndexOf(thumbnailUrl, "@g") > 0 or strIndexOf(thumbnailUrl, "@p") > 0$><$rssHttpHost$><$thumbnailUrl$><$elseif dGif$><$HttpWebRoot$>images/docgifs/<$dGif$><$endif$>" /> <description> This and lots of other tweaks can be done to the RSS component to help extend it for optimum use in Explorer. Hopefully this can get you started. *Note: This post also applies to Universal Records Management (URM).

Read the article

NFS v4, HA Migration, and stale handles on clients

- by Karl Katzke

I'm managing a server running NFS v4 with Pacemaker/OpenAIS. NFS is configured to use TCP. When I migrate the NFS server to another node in the Pacemaker cluster, even though the metadata is persisted, connections from the clients 'hang' and eventually time out after 90 seconds. After that 90 seconds, the old mountpoint becomes 'stale' and the mounted files can no longer be accessed. The 90 second grace period seems to be part of the server configuration and not the client configuration. I see this message on the server: kernel: NFSD: starting 90-second grace period If I restart the NFS client on the client nodes after I migrate (unmounting and then remounting the share), then I don't experience the problem, but connections and file transfers still interrupted. Three questions: What is the 90 second grace period? What's it there for? How can I keep the files from going stale on the clients without restarting them after I migrate the NFS server to another node? Is it actually possible to migrate the NFS server without having large file uploads drop?

Read the article

Windows Server 2008 Create Symbolic Link, updated Security Policy still gives privilege error

- by Matt

Windows Server 2008, RC2. I am trying to create a symbolic/soft link using the mklink command: mklink /D LinkName TargetDir e.g. c:\temp\>mklink /D foo bar This works fine if I run the command line as Administrator. However, I need it to work for regular users as well, because ultimately I need another program (executing as a user) to be able to do this. So, I updated the Local Security Policy via secpol.msc. Under "Local Policies" "User Rights Management" "Create symbolic links", I added "Users" to the security setting. I rebooted the machine. It still didn't work. So I added "Everyone" to the policy. Rebooted. And STILL it didn't work. What on earth am I doing wrong here? I think my user is even an Administrator on this box, and running plain command line even with this updated policy in place still gives me: You do not have sufficient privilege to perform this operation.

Read the article

DD-WRT PPTP VPN problem

- by Tobias Tromm

I try to configure a DD-WRT as a PPTP client. The VPN Server is Windows Server 2003. This is my scenario: The Windows 2003 Server has set to give to the VPN Client the 10.0.0.81 fixed IP and to add a network route to the remote home. At the remote home I have changed the PPTP Options at DD-WRT to make the connection. The VPN connection is successfully established. ...and Windows successfully add the route to the remote home 192.168.2.X. From the remote home I can successfully access any computer from the VPN server side. The problem is when I try to access the remote home from the Server side. From Server side I only can access\ping DD-WRT ( by VPN Client IP - 10.0.0.81). What's wrong? How I need to do to be a site-to-site VPN? This is what happen when I try to tracert the remote home from local home.

Read the article

Sql Server Management Studio: Change Prefix or Suffix characters

- by PhantomDrummer

I have an instance of SSMS 2008, for which the option to edit data in a table doesn't work. If I right-click on any table in the Object Explorer and select 'Edit top 200 rows' I get an error dialog 'Invalid prefix or suffix characters. (MS Visual Database Tools)'. The error seems to be associated specifically with SSMS, not with SQL Server (because this SSMS instance gives the same error no matter what database I connect to, but I've verified I can connect to some of the same databases using SSMS on other machines without the error). (However, our firewall prevents me using SSMS on other machines for some crucial tasks, so I do need to fix the problem). Googling for the error suggests that I should change the prefix, suffix or escape character, but without any indication of how you can make that change in SSMS. I'd also note that I'm not aware of having done any customization on SSMS since installing it, so would be surprised at having to make such a change now. Does anyone have any idea what the error message means or what I can do about it? Or how I can change the prefix/suffix/escape characters if that is really the problem.

Read the article

No Outbound Internet on Windows Home Server

- by Kyle B.

Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

Read the article

SQL Server on Linux

- by TimothyAWiseman

For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

Read the article

windows Home Server backup error

- by domen

I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

Search Results

Search found 95301 results on 3813 pages for 'server client'.

Page 267/3813 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274 | Next Page >

- by David Pfeffer

- by zaharpopov

- by Mark Hurd

- by driis

- by user522559

- by Tom

- by Debasish Pramanik

- by VVander

- by fryme

- by imperium2335

- by jia

- by SiN

- by idrees99

- by mr.b

- by salvationishere

- by Simon Thorpe

- by Orgad Kimchi

- by kyle.hatlestad

- by Karl Katzke

- by Matt

- by Tobias Tromm

- by PhantomDrummer

- by Kyle B.

- by TimothyAWiseman

- by domen

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274 | Next Page >