Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 268/372 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• CPU Usage at 100% with "Hardware Interrupts"

  - by eventualEntropy

  After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

  Read the article

• Dell PSU Compatibility: Dell Inspiron 530 (Desktop)

  - by ashes999

  I have an Inspiron 530 with a stock PSU. I need to upgrade it to meet my video card's needs (AMD HD6770), which demands at least 450W, to potentially fix BSODs with the latest version of the drivers (so claims AMD support). Now, I've heard conflicting reports about whether Dell uses special/proprietary PSUs. (Examples for aye and nay to special PSUs.) How exactly can I determine if a PSU is compatible with my PC, before buying it? I assume I will not be able to return it if it doesn't fit, or makes my computer explode in a fireball of doom.

  Read the article

• Remote control a computer using another computer

  - by Dean

  I've got a main desktop computer at home, I'd like watch movies using it but able to control it afar. For example, I would like to lay on my bed and control the desktop using my own laptop via wireless. I've been looking for solutions to my question. I tried to use remote desktop, I can pause the movie but I then have to go to the pc to log in the OS again. I also tried to bind my desktop to my mobile phone over bluetooth, this works as I can control the mouse etc. but I found I can barely see the mouse pointer when at long distance. I still wish I can use my laptop as a remote control, is this possible?

  Read the article

• Stress test speed on a gateway?

  - by TheLQ

  I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  Hi, I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• Launching Intent.ACTION_VIEW intent not working on saved image file

  - by Savvas Dalkitsis

  First of all let me say that this questions is slightly connected to another question by me. Actually it was created because of that. I have the following code to write a bitmap downloaded from the net to a file in the sd card: // Get image from url URL u = new URL(url); HttpGet httpRequest = new HttpGet(u.toURI()); HttpClient httpclient = new DefaultHttpClient(); HttpResponse response = (HttpResponse) httpclient.execute(httpRequest); HttpEntity entity = response.getEntity(); BufferedHttpEntity bufHttpEntity = new BufferedHttpEntity(entity); InputStream instream = bufHttpEntity.getContent(); Bitmap bmImg = BitmapFactory.decodeStream(instream); instream.close(); // Write image to a file in sd card File posterFile = new File(Environment.getExternalStorageDirectory().getAbsolutePath()+"/Android/data/com.myapp/files/image.jpg"); posterFile.createNewFile(); BufferedOutputStream out = new BufferedOutputStream(new FileOutputStream(posterFile)); Bitmap mutable = Bitmap.createScaledBitmap(bmImg,bmImg.getWidth(),bmImg.getHeight(),true); mutable.compress(Bitmap.CompressFormat.JPEG, 100, out); out.flush(); out.close(); // Launch default viewer for the file Intent intent = new Intent(); intent.setAction(android.content.Intent.ACTION_VIEW); intent.setDataAndType(Uri.parse(posterFile.getAbsolutePath()),"image/*"); ((Activity) getContext()).startActivity(intent); A few notes. I am creating the "mutable" bitmap after seeing someone using it and it seems to work better than without it. And i am using the parse method on the Uri class and not the fromFile because in my code i am calling these in different places and when i am creating the intent i have a string path instead of a file. Now for my problem. The file gets created. The intent launches a dialog asking me to select a viewer. I have 3 viewers installed. The Astro image viewer, the default media gallery (i have a milstone on 2.1 but on the milestone the 2.1 update did not include the 3d gallery so it's the old one) and the 3d gallery from the nexus one (i found the apk in the wild). Now when i launch the 3 viewers the following happen: Astro image viewer: The activity launches but i see nothing but a black screen. Media Gallery: i get an exception dialog shown "The application Media Gallery (process com.motorola.gallery) has stopped unexpectedly. Please try again" with a force close option. 3D gallery: Everything works as it should. When i try to simply open the file using the Astro file manager (browse to it and simply click) i get the same option dialog but this time things are different: Astro image viewer: Everything works as it should. Media Gallery: Everything works as it should. 3D gallery: The activity launches but i see nothing but a black screen. As you can see everything is a complete mess. I have no idea why this happens but it happens like this every single time. It's not a random bug. Am i missing something when i am creating the intent? Or when i am creating the image file? Any ideas?

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Screensaver does not work for one user account, but does for the other

  - by Travesty3

  Both my screensaver and my "turn off monitor" power saver never come on for one user account on my computer, but it does for the other. It worked before. I can't think of anything I did just before this started happening. I'm using Windows 7 Pro SP1 with the default Aero theme, my screensaver is set to Mystify and should come on after 10 minutes. My power saver setting is set to Balanced, the Turn Off Monitor setting is set to 15 minutes, and the Sleep setting is set to Never. This all works absolutely fine on my user account, but if my wife's user account is logged in, it doesn't work. I don't have any antivirus, I'm not using a wireless keyboard or mouse, and I don't have MagicJack. I have restarted the computer many times since I've seen this problem. Anyone have any suggestions?

  Read the article

• Permanently change IP address on SuSE 10

  - by Long Ngo

  I am trying to change IP address of a SuSE 10 machine that is running Tomcat. I need to create a shell script to do this so could not use YaST. As some sites suggested on my Google search, I edited the files in /etc/sysconfig/network/ifcfg-eth-* to change the IP address. After that, I restarted the network service by calling /etc/init.d/network restart. The network card restarting just fine. I, then, restarted tomcat web service. However, when I browsed the new IP address using browser, I got an "Request denied" message. Can anyone please tell me how I could do this? Thanks

  Read the article

• DNS Server and Private HTTP / SOCKS Proxy

  - by DucDigital

  Hi every one, this is just a small hacking attemp to our router. I'm trying to setup a small DNS and forward webpages through proxy behind the scene. I've successfully implement the DNS server that will do the resolving or anything involved in address resolve. But is there anyway I can forward the user using DNS to a proxy instead of request directly to the server? Are there any software/opensource that I can use? I notice on paid wireless, they can provide a login page if user is not login yet, i think this is a way of implementing proxy. Also the hardware is very basic with linksys and netgear router which connect directly to the internet. It's a basic LAN

  Read the article

• DNS Server and Private HTTP / SOCKS Proxy

  - by DucDigital

  Hi every one, this is just a small hacking attemp to our router. I'm trying to setup a small DNS and forward webpages through proxy behind the scene. I've successfully implement the DNS server that will do the resolving or anything involved in address resolve. But is there anyway I can forward the user using DNS to a proxy instead of request directly to the server? Are there any software/opensource that I can use? I notice on paid wireless, they can provide a login page if user is not login yet, i think this is a way of implementing proxy. Also the hardware is very basic with linksys and netgear router which connect directly to the internet. It's a basic LAN

  Read the article

• Isolating VMware virtual machines from the network

  - by jetboy

  I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

  Read the article

• Are all bluetooth adapters the same ?

  - by ldigas

  I have a wireless bluetooth mouse which I'm not using. It used to have a bluetooth adapter with it, which I lost a long time ago ... (don't ask). Since my regular mouse just died (bad contact in cable from messing with it too much) I was thinking of buying just the new generic bluetooth adapter ? Are all those adapters the same thing ? Or can this that came with the mouse be somehow different ? Edit by ldigas: How would one find out what bluetooth standard/class/adapter one needs ? (I don't see anything useful written on the sticker on the mouse). Or to put it bluntly - will it work with this one in your opinion ?

  Read the article

• Windows XP: Nvidia GeForce 6100 Brightness

  - by ExProG

  Hello, I have an Nvidia GeForce 6100 and using XP. I also have a SmartBoard. my brightness settings are completely changed and are not good. I tried changing the settings at the Nvidia GeForce 6100 nForce 430 color correction settings. I cannot get any ideal, it's just way to bright, what do i have to do? I already tried my monitor brightness settings and the smartboard brightness settings. it does not matter. I think there are problems with the pixels. How can i fix this? Is there something wrong with my video card?

  Read the article

• How to configure wpa_supplicant on RHEL6?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop. I uninstalled the default NetworkManager in order that I could configure the network all in the command line. The Ethernet part is okay, but I have problem bringing up the wireless interface. What I got is: Bringing up interface wlan0: Determining IP information for wlan0... failed; no link present. Check cable? I did exactly what this article says. I am not sure if it is because the article is obsolete or something else. Please help.

  Read the article

• Which linux distro for a laptop in windows environmet?

  - by Dev er dev

  I just got new laptop at work. What would you recommend as a linux distribution for it? All other developers are working under windows, and use windows tools. I'm currently using ArchLinux, but want to change it. I don't want to waste time configuring wireless, windows network shares, network pritners, projector, etc ... I want this stuff to just work, while still having sane and stable development evironment and tools. Is Ubuntu a good choice for this? I use gentoo at home, but don't think it is a good match for work environmet. EDIT: Note that we are working on cross platform apps, and deployment platform is almost always linux. There are very few windows apps that I have to use (like MS Project). It is just that everything else is windows centric. I use linux because I feel more productive with it, even if I have to dual boot to edit MS Project files.

  Read the article

• Choosing a very basic Linux distro with minimal boot time?

  - by user30961

  I've had Ubuntu for a year now, like it but it doesn't match my needed configuration for my old laptop. So... I am using Linux mainly for webapps so I don't care much about user interface. What I need is a distro which is small enough to install on a SD memory card (or USB) since I am removing the hard drive, all my data is in the cloud. I also want it to have as short boot time as possible. I tried Puppy Linux and it seems ok but it had preinstalled looots af small apps I don't need, I would really like to have a distro with minimal preinstallations and add them on my own. So what are my choices and why would you recommend these?

  Read the article

• How can I route all network traffic through Sonicwall Netextender VPN Client with Ethernet internet sharing enabled on a mac?

  - by Ryan Smith

  I basically have a sonic wall firewall protecting a server which I want to SSL VPN log into with multiple computers. However, I would like to do this by having those computers (or router with computer) connected to a Mac's ethernet port (the vpn would be over wireless) through the internet sharing feature on the iMac. We use the provided Sonicwall Netextender VPN Client to connect to the firewall / server and would like to only have to use one SSL ID to cover all the computers by only having the central Mac sign in. Can anyone out there help me achieve this or tell me it isn't possible? Thank a lot.

  Read the article

• MacBook Pro Boot Camp SPDIF passthrough?

  - by Ryan Zink

  I'm using Windows 7 through Boot Camp on a unibody Macbook Pro and am having problems using the SPDIF output. I get the expected Dolby Digital or DTS in some movies, but in other movies and in games (Source engine, StarCraft 2) where the output is enabled to 5.1, the output invariably shows up as Dolby Pro Logic, which means (I think) that passthrough is not enabled. The boot camp drivers for the sound card don't have any sort of control panel, and the Windows settings for enabling DTS and Dolby seem to work when I test those outputs in the sound settings. Is there some other setting or utility I can use to enable SPDIF passthrough for all programs?

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

  - by GregC

  I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

  Read the article

• Home network with Windows 7 as router

  - by Michael

  Background: I have tried to use routers, but so far all of them can't handle the bandwidth, number of connections eventually limited by the hardware resources, so overall the home routers are decreasing the internet speed. I went through DD-WRT and stuff like that. Question: What I want is to use my Windows7 PC as router. It has 2 LAN cards. I'm going to connect to this router another desktop 2 pcs and notebook through wireless router. The main question is what is the most efficient way to turn this Windows7 box(and I need Windows for native NTFS support) into router with NAT/Routing/Firewall functionality? Is there any routing software recommended for this purpose or I should just use windows native "Internet Sharing"? I'm going to run SIP phones in the LAN, so I need friendly NAT(Full cone perhaps). Also I'm going to have FTP server on that Windows7 "server" PC. As firewall I'm thinking about Comodo. Need to drop all incoming, unless explicitly allowed.

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• Problem restarting my Ubuntu system

  - by VoY

  Whenever I try to restart my Ubuntu either from the command line by typing reboot or in GNOME the computer goes from X to console, starts the shutdown process and then a message saying "[ some number ] Starting new kernel" appears on the screen and the computer goes back to X login screen. I suspect this must have something to do with nvidia drivers, because it seemed to have appeared around the time I bought a new graphic card. Also, when I reboot the second time I see weird graphical artifacts on the screen. When I boot from ubuntu live cd I can reboot just fine. I used jaunty, recently I switched to karmic with no change. This bug is very annoying, because I have to hard reset my computer in order to reboot. Also not good for the filesystems, I suspect. Can you suggest a way to debug the cause or if not at least the easiest way to go about reinstalling ubuntu without losing customizations/settings/data?

  Read the article

• v4l - capture and watch at the same time

  - by John Barrett

  Capturing v4l and line-in audio using mencoder works very well, but I would like to record real-time gameplay video from consoles plugged into the video card. I've used xawtv for this (Works quite well, can preview and record in real time), but when I enable any deinterlacing or aspect ration options the video fails to record. I have to record raw and re-encode the video with the appropriate filters later to get something workable. Other things I have tried: tvtime with xvidcap and jack audio capture - xvidcap drops frames and muxing the audio is impossible as it will go out of sync (I have not found muxer options that work to force a correct frame rate) mencoder capture to file, attempt to pipe tail of file to mplayer... mencoder works great, piping the file is far too heavy to attempt gameplay. Soooo, v4l capture and preview simultaneously, recommendations?

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >