Search Results

Search found 2143 results on 86 pages for 'vpn'.

Page 27/86 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• Nodes inside Cisco VPN. Incoming SSH requests allowed. But can't initiate an outbound SSH.

  - by Douglas Peter

  I've a gateway-to-gateway VPN setup between my Linksys RV042 router and a Cisco VPN. I am able to SSH into any of the machine inside the VPN from my network. But none of the machines inside the VPN can initiate an SSH into my network. It seems they've blocked even all ping requests to my network gateway. This is the requirement: I have scripts that SSH into the machines inside the VPN and run a long mysql query. The query generates an output to a file. The time that these queries take is variable. So I have a loop in my machine that periodically SSHes into the VPN machine and checks if the query has finished, and pulls the generated file using SCP. I need to simplify it thus: The script will run at the machine inside the VPN, and when the query completes, it will SSH into my machine and pushes the generated file. Thanks for any ideas.

  Read the article

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• How do I learn IPSec VPN implementation on FreeBSD from pfSense

  - by Lang Hai

  I've been trying to figure out a complete working solution for IPSec VPN implementation on FreeBSD but with no luck till now. pfSense seems did a fantastic job on supporting IPSec and even for mobile clients, so I downloaded and installed pfSense hoping to figure out how it works, or at least see some configuration examples, but I couldn't find anything interesting maybe because I'm not familiar with pfSense, so I'd like to ask for help. How pfSense implements IPSec, what tools are used? Where does pfSense store all its configuration files? And since pfSense has its own kernel mods and acts as a different OS, there's no way for us to install it on top of an existing FreeBSD box, and plus that it is such a great project combining those fantastic features, so my question can kinda be extended as: How do we learn from pfSense, and implement its features on top of a regular FreeBSD server?

  Read the article

• Unable to connect to a remote SQL Server Instance over a VPN

  - by Jack Njiri

  I'm running SQL Server 2005 on two different servers running Win XP. The two servers are in different physical locations and are connected via a dedecated point to point data link in a virtual private network(VPN). Im only able to connect to the remote instance of SQL Server by specifying the IP address on the server name property. If I provide the actual server name say 'ServerA', then I get an error message. Everything works fine except configuring replication at the subscriber level, which requires the actual name of the instance, not an IP address or alias. I have already configured both instances on allow remote connections and im running the SQL Server Browser. How do I connect to the remote instance by providing the instance name? Alternatively how I configure subscription to a remote publisher without supplying the remote instance name?

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

  - by gravyface

  I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

  Read the article

• Small business VPN solution

  - by Crash893

  I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

  Read the article

• Connecting PPTP VPN with Ubuntu 9.10

  - by Christian P.

  I have an ubuntu machine that I wish to connect to a VPN and have traffic routed through that. So far I have installed the pptp-linux package and tried my hand at configuring it manually as well as using pptpsetup. I am using Ubuntu 9.10, but regardless of the method I get "Couldn't find MPPE kernel support". Searching a bit for the problem seems to reveal that Ubuntu DOES come with MPPE kernel support (and has done for quite some time). If anyone can figure this out, you'd be a real lifesaver!

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• Home privacy when using work VPN on personal computer

  - by SavvySecretary

  Here is a question from not so computer savvy user. I have installed VPN client from my workplace on my personal home computer and use it to take brief connections to their network. Just recently I started to think, can they access my home folder and copy all the files from there? I have Windows 7 Pro. My home computer does not belong to the domain of my workplace and there is no addministrators account active on my computer, just my own. What is possible and what's not? Can't seem to find any specific answers by googling. Really awful thought they could snoop all around on my pc.

  Read the article

• Trying to get a new user up on VPN

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• Debian PPTP VPN can't get out to the internet

  - by phidah

  I've setup a Debian pptp server which seems to be running fine. I can successfully access the local services on the server when connected to the VPN, but I cannot go out of the LAN, i.e. I cannot just go to any server out on the internet. I guess this is come kind of routing issue that won't allow me to use the server as a gateway? I couldn't really find any articles or similar that could tell me how to set this up properly. Thanks in advance.

  Read the article

• Simplest vpn server for linux

  - by Ian R.

  I'm supposed to setup a vpn server on our linux machine for some of our employees who travel a lot. I have 10 ip's on that server so I'm looking into a simple software (not openvpn which is a hell to digest). The software should be able to allow connections from any os type (linux, mac, windows). It should also be able to allow connections via username/password. I would like to assign 1 ip to each client. Any ideas, names?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Saving small text files is slow over Win Server 2008 R2 VPN

  - by Buckers

  We have a VPN connection to our Windows Server 2008 R2 machine, and the connection works fine. Large files go back and forth fairly quickly, but we use the connection mainly for working on small text files (.aspx, .asp, .php etc). What we find very annoying is that even the smallest of files, there is a noticeable delay of between 2-5 seconds when saving any changes. As we often make changes to code and are constantly saving, this is becoming a problem. Is there anything that might be causing this delay? Or is there anything we can do to speed it up? The connection is definitely not the issue as we have a constant 5Mb upload from our server, and 20Mb+ down on the remote machines. Thanks, Chris.

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• VPN PPTPD with MPPE Support for Debian or Ubuntu

  - by user78395

  Having an unencrypted vpn connection from a windows client to linux is pretty easy by using pptpd. When I was looking for an solution for encrypted (per MPPE) connection, I found a lot of information about patching the kernel etc. - so it definitly works after some work. But all these information is pretty old (2005-2006). Is it the same solution nowadays? I am not asking for a complete instruction (only if it's short) - I am more asking for a link to the right solution.

  Read the article

• Looking for a VPN server that fits my needs

  - by BCS

  This question (and some more research) has revealed that OpenVPN isn't for me. So, what are my other options? In particular things I need/want (most important first) are: A server daemon that runs on Linux without kernel modules Clients work from behind NATs and Firewalls. Free/FOSS Support for PPTP, L2TP or L2TP/IPSec PSK/CRT A architecture that makes all accesses equal: if the server is to have access to the VPN, then it must be a client. Just like everyone else. Minimal configuration/state. The first 3 are must haves and the last is a nice to have. The rest I could live without, but then again I could also live with nothing.

  Read the article

• VPN between Cisco ASA 5505 AND Sonicwall SOHO3

  - by user41451

  Hello. I am trying to establish a site-to-site VPN tunnel between an old SOHO3 and an ASA 5505. The ASA has a static IP and the SOHO3 is dynamic. I have tried everything my limited knowledge lets me and need some advice on how to proceed! Phase 1 (according to the ASA logs) completes - followed by a message saying "All IPSec SA proposals found unacceptable!" so I guess the settings between the two don't match. I have played with various combinations and nothing seems to work - I am overlooking something, just not sure what it is! Any help would be appreciated.

  Read the article

• When connected to VPN through Windows 7 running under OS X via VMWare Fusion, does traffic from the OS X side go through the VPN?

  - by user1202747

  I only have a rudimentary knowledge of VPNs. My understanding is that, in most network configurations, when a client is connected remotely to a VPN server, all network traffic passes through the VPN server before going to the client, and all data coming from the client passes through the VPN server before going out over the wider Internet. I run Windows 7 using VMWare Fusion under OS X Lion. If I access a web page in Safari, say, on the OS X side of things, does that traffic pass through the VPN server? Or does it bypass it because the two OS's are regarded as separate network devices by my LAN? I would appreciate any insight anyone can provide. Thanks.

  Read the article

• How do I send traffic to specific IP addresses through VPN and others directly to the internet?

  - by keithwarren7

  I am running Windows 7 and using the Cisco VPN adapter to connect to a private network where I access resources starting with the IP address 172.. My problem is that when connected to the VPN all external traffic is routed through the VPN. I want to set things up so only certain IP addresses go through the VPN and everything else goes out over the local adapter and out to the internet as normal. How?

  Read the article

• VPN connection prevents the computer from sleeping - can I avoid that ?

  - by driis

  Most of the time, I need to have an active VPN connection when working from my home PC. I've discovered, that if the VPN is active, and I leave the computer, the computer does not go to sleep automatically, as it should. If i disconnect VPN, it works. Why is that ? How can I ensure that my PC can go into sleep mode automatically even with the VPN connection on ?

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >