Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 271/372 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• Newly registered domain name still doesn't show up after 72 hours.

  - by BioGeek

  Seven days ago I ordered a domain name with a local (Belgian) domain name agent. I have already webspace at a shared host in the US, so I filled in their nameservers on the form. I immediately payed with my credit card. Three days ago I received an e-mail from the domain name agent, saying that my domain name was registered with the external nameservers I provided, and that the site would be visible within 24 hours. However, 72 hours after that mail I still can't see my domain name. A whois search shows indeed that my domain is registered on my name,but a ping to the domain returns unknown host and a traceroute gives the similar Name or service not known. What can have gone wrong, and which (Linux) commands can I use to find out. Or should I just be patient and will the domain name eventually be propagated?

  Read the article

• Securing data sent to an unencrypted WiFi AP

  - by David Parunakian

  The business plan of a project I'm involved in assumes selling certain WiFi-enabled devices to end users. All these devices originally have an unencrypted connection and a standard SSID. The problem is that although the user can connect to it and set both a new SSID and a WPA passphrase, these are being sent to the AP in plain text and thus can be intercepted by anyone nearby with a sniffer. What's the best solution to this problem, and why? Initially set up an encrypted wireless network at the device and supply the user with a printed passphrase Buy an SSL certificate for the AP's default IP address or local domain name (the APs aren't supposed to work as a router and have a captive portal & dnsmasq installed, so all of them can pretend to be myunit.example.com, as far as I understand) Something different Thank you.

  Read the article

• BackTrack5 R2 video driver works, but presents disturbing error message

  - by poz2k4444

  I've installed backtrack 5 R2 on my computer and everything works fine but the video driver. The solution described here does work, but whenever I start the graphics mode, a message saying that the graphics card doesn't support the configuration that is loaded. I don't know why this is happening. It doesn't change the performance of my computer, but I'd like to know why the message is arising, and what I can do to stop it. Alternatively, where can I find the configuration file that would help me understand what's going on?

  Read the article

• Block P2P traffic on a Linksys router WRT54G with tomato firmware

  - by Kami

  Hi, I'm running a small wireless network (6 to 10 users) on a Lynksys WRT54G with tomato firmware sharing an internet connection. I don't want the users to download files with bittorrent (mainly used) and other p2p apps. I've also found some solutions about lowering p2p traffic priority using QoS. I really need to BAN p2p traffic. Does anyone know how to setup some rules to deny that kind of traffic ? I've tried to setup an Access Restriction Rule: But it's not working at all ...

  Read the article

• I install Ubuntu 13.10 and reboot and im on KDE desktop?

  - by jgamer578

  Hi I'm Jacob and I have no idea what's going on. I installed Ubuntu 13.10 today and was playing around with it for a while and dl'd a bunch of apps from software center and stuff. Eventually I installed steam and (finally) got it working. I downloaded TF2 and had some weird issue where the screen got so distorted to the point I could not play. So I dl'd a driver for my graphics card from the additional drivers app (or whatever it's called) and when it was done I restarted my computer (because it said to.) When the PC booted up it loaded the KDE desktop and I have no idea why. I had unity before I rebooted. Ubuntu 13.10 is the only OS installed on my PC, and I still have all the apps that I downloaded, but I kinda like unity (I started using Ubuntu after they switched to unity) and want it back. Thanks for reading and any help in advance, Jacob.

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

  - by Scott McKinney

  I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• Blocking internet poker applications

  - by Matthew Savage

  I 'look after' the wireless internet for a cafe where I live, and we've noticed that there's quite a substantial slow down of internet speeds when certain users are playing internet poker. I've put in filters to block any HTTP traffic referencing gambling and poker etc, however I want to be able to block any applications (i.e. poker clients) which don't use HTTP. I've tried searching around for a list of poker clients and perhaps their ports, but have had no real luck. Does anyone know what these might be?

  Read the article

• Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

  - by mowsala

  I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

  Read the article

• How to automate changing my ip?

  - by callisto

  I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• iptables forwarding between two interface

  - by broody

  So I have a linux box with two wireless interfaces, one is a station and the other an AP. wlan0 (station) - Connected to the internet connection wlan1 (AP) - Other clients connect to it. I would like for clients connected to wlan1 to be able to access the internet on wlan0. And I'd like to do this with iptables as my kernel doesn't have bridging support... Here's what I've tried so far with iptables but it's not working: iptables -A FORWARD -i wlan0 -o wlan1 -j ACCEPT iptables -A FORWARD -i wlan1 -o wlan0 -j ACCEPT I'd appreciate any help.

  Read the article

• Chromebook, Crouton & “External Drive” is it possible to rename the folder?

  - by Cyril N.

  I have a Chromebook where I installed Crouton. I have plugged an SD Card and Chromebook detects it as "External Drive". In my Ubuntu instance, it's located at /media/removable/External Drive/ but this poses some problems for executing some applications I have installed on that external drive. In order to fix the problem, I need to remove all the spaces in the path, which is located in "External Drive". My question is simple, is it possible to move/rename the mount name "External Drive" to something else and doing it automatically at every mount/boot ? Thank you for your help !

  Read the article

• Leightweight Linux distro to install on my old PC

  - by Juri

  Hi, I have an old PC at home which is mainly used by my Mom or my brother just to browse the web and maybe open some PDFs / docs. Till now I had Win2000 installed, but it performs very poorly. So I thought about installing Linux on it. Could someone give me some suggestions for a leightweight Linux distribution which works well?? Is standard Ubuntu too heavy?? PC details CPU: Athlon AMD ~1211 MHz RAM: 1GB Grafics Card: NVidia GeForce FX 5200 (not so relevant,but still) Thx for your suggestions.

  Read the article

• SuperMicro IPMI through OpenBSD PF Firewall

  - by thelsdj

  I'm trying to access a SuperMicro IPMI card that is behind an OpenBSD bridged firewall. A couple pieces of information: The OpenBSD firewall itself has a SuperMicro IPMI that I can access across the internet. The IPMI I'm trying to reach can be reached from behind the firewall. My gateway does arp request the IPMI and it does appear to respond (this is from the external interface of the firewall) 16:57:45.548892 arp who-has ipminame tell gwname 16:57:45.549500 arp reply ipminame is-at ipmimac But when I make a request to the IPMI IP from outside the firewall the external interface of the firewall shows no traffic with the IPMI ip as its destination. Any idea what might be causing this problem? Is there something about IPMI traffic that my gateway wouldn't like (the gateway is provided by my colocation provider so I can't easily debug it).

  Read the article

• ethernet not working

  - by good boy

  i wanted to know how do i setup an ethernet connection on a laptop,my isp gave me a telephone like cable which fits the ethernet port. i guess its the ethernet cable. when i connect it, nothing happens on the pc the ethernet card(realtek pcie gbe family controller) says cable not plugged in. i am using wired connection for first time.the system is completely stable with softwares .the drivers are also automatically updated through a manufacturer installed update system. the isp says there must be some sort of light on the port. whats the problem? how do get it working.

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  Hello, I recently did a full upgrade of windows 7 on my thinkpad, everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen just before the Windows logo appears, disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this wont boot with battery plugged in is greatly appreciated - i need to take this battery out on the road/trains etc.... Cheers Matt

  Read the article

• How to set up DHCP-configured access through a Linux box?

  - by marcusw

  I would like an old desktop box to use my laptop as a router to access the internet. Here is my setup: I have one ethernet port in the side of my laptop which I want to use to get internet access to my desktop computer. The laptop is connected to the LAN via a wireless link. Both systems run Linux. The desktop autoconfigures itself using DHCP. The laptop is a Kubuntu system. I do not have any crossover cables, though wireshark on the laptop sees the DHCP requests from the desktop just fine, so I doubt that I need one. What do I have to do to make this work?

  Read the article

• VirtualBox networking problem, host XP, guest Debian

  - by Silma

  Hi, I'm trying to set up a development environment in a virtual machine on my laptop, with debian os. I have both lan and wlan available on the host machine, yet I can't connect to the internet using either. As I said the host OS is windows XP and the guest OS will be the latest Debian, we downloaded the business card net install so we need internet access from the beginning, besides we need the virtual machine to be visible on the local network (for my fellow developers). We tried host-only networking, NAT, bridging, with proxy (the local network uses a proxy to connect to the internet) and without proxy, nothing seems to work. What else can we do? Thanks a lot.

  Read the article

• Offline installer for Windows 8?

  - by duncan12

  I have a computer repair service, and can see a few more people wanting Windows 8 updowngraded. Because of New Zealand's internet speeds it takes 1-2 hours to run the download part of the official Windows 8 upgrade tool. This means I have to go back to people the next day. I would like to keep an "offline" version of the Windows 8 upgrade tool on my flash drive, so I can avoid this inconvenience. Obviously it would still require a legit credit card etc, it just comes with the download part not needed. I cannot find such a tool. Does one exist?

  Read the article

• Program shortcuts disappearing in Windows Mobile 2003, any way to get them back?

  - by Carlisle White

  I have a WM2003 device with some programs installed on it and a full backup created and saved to a SD card. If the device runs out of charge for some time (or the battery removed) everything is reseted back to defaults, so the custom programs and configs are gone. When this happens I used to restore the full backup to put everything back to normal again. But I've recently installed TomTom Navigator 7 and for some reason, its shortcut in the "Programs" section is not saved when creating a full backup (with the eBackup app provided) and the installation doesn't create a shortcut in the main screen (as version 6 used to do). Is there any way to make this shortcut persistent? Is there any way to create custom shortcuts in the programs section or in the main screen (preferably)? Thank you very much for your help, anything is welcomed.

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >