Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 272/372 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Enabling 8021q on a nic

  - by Chris Phillips

  Hi, I'm trying to get a vlan interface on a bonded nic (Centos 5.5) and whilst the interface has been very happily created with vconfig I'm seeing no traffic on it at all. Running tcpdump and tshark on the underlying eth0 I see no sign at all of vlan tags in the traffic, and I'm wondering if there's somethign I'm missing on the server side as the network dept say they are sending me the tagged data. I've got the 8021q module loaded, however under lsmod it shows it's only being used by the cxgb3 module, for an unused onboard iSCSI card, whereas my nics (on an HP DL380 G7) are driven by bnx2 and e1000e modules. Should these modules be listing 8021q as used module? should I have something conrete in /etc/modprobe.conf? Thanks Chris

  Read the article

• Fullscreen Video stutters on second monitor laptop

  - by nobrandheroes

  Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Missing eth0 configuration file

  - by Godric Seer

  I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• make vnc server listen on guest's ip address

  - by gucki

  My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

  Read the article

• Software solution to switch between computers using KVM switch

  - by user71737

  I am using a Fling KVM switch (by Belkin), to connect 2 computers to my monitor One computer is running XP and the other is running Linux My wireless switching mechanism has just gone the way of the saints but Belkin has kindly supplied a software solution for this occurrence. There is a small app called Fling (surprising) that allows me to switch from the XP machine to the Linux machine but nothing to switch back to the XP. What I need to know is there a similar app for the Linux computer. (NB I have tried Synergy but have no idea how to set it up - I've been told that synergy might work). Thanks in advance Norm

  Read the article

• Extend my LAN network

  - by user268291

  i have a patch panel and hardwiring already setup in my office. The patch panel is 24-port and all the ports are engaged. All my switch ports are engaged. Now, I have a printer connected to a wall point (RJ45) which I want to shift to a new room where there is no LAN setup. I want to have two RJ45 wall plugs in the new room so that I can connect one RJ45 port to have my LAN in the new room and the other RJ45 wall port I want to use for my printer. There is no option other than LAN (no wireless). Please help me and tell me how do I get the two RJ45 wall plate plugs in the new room up and keep my LAN running. It is a little urgent for me. Please help.

  Read the article

• Computer won't power on

  - by briskmojo

  Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• PC case and PSU screw question....

  - by user32569

  Hi, I have maybe a funny one to ask.... To this Christmass I bought new PC. When I started to asseble it, I found that my case (Artic Cooling Silentium T11) has 12 screws for HDD, DVD etc, and 6 screws for the expansion cards. Well, first thing that surprised me was, why only 6 screws for expansion card, when case has actually 7 slots. And second, what are PSU screws supposed to some with? The PSU, Case or nothing? Becouse neighter PSU or Case had them. PSU is Evolve Storm 600W. Well, I know case and PSU are not some high end devices, but still, would it hurt them to add 1 screw for expansion cards and 4 for PSU? So, my question is, is this situation normall, or which one (Case or PSU) does normally screws come with? Thanks.

  Read the article

• Is the field BusID necessary in XF86Config?

  - by Greg

  Hello, I am using a cluster of machines running on Ubuntu 10.04 LTS which are supposed to be homogeneous, but apparently they are not. In particular, I am configuring the X server on these machines, and I pushed a /etc/X11/XF86Config that includes the following section: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:5:0:0" EndSection The problem is that the BusID of the graphic card is PCI:5:0:0 for some machines, and PCI:3:0:0 for others. Is there a way that the X server automatically detects the appropriate Device (based on the name for instance)? Thanks,

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• Is there any way to play Netflix (stream) in Windows Media Player 11?

  - by Not So Sharp

  Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

  Read the article

• ICS as guest in Ubuntu 12.04 host

  - by oshirowanen

  I have installed Android as per this guide as a guess os via VirtualBox: http://www.android-x86.org/documents/virtualboxhowto Using the following ISO: android-x86-4.0-RC1-eeepc.iso But I am unable to connect to the internet from within the android virtual machine. The host OS is Ubuntu 12.04 where the internet works fine. I have internet access via a usb wireless connection to the home router. All this is fine. If I install Ubuntu 12.04 as a guest, where the host is also Ubuntu 12.04. The guest os'es internet works fine out of the box. But for some reason, I can't get the above androids internet to work out of the box as the guest os. Anyone know what I am doing wrong?

  Read the article

• Tool to fix video that's out of sync with audio?

  - by Javier Badia

  I'm looking for (preferably free) software for Windows 7 that will allow me to fix an AVI file that has audio out of sync with the video. I tried with Windows Live Movie Maker and VirtualDub and couldn't find out how to do it (if at all possible) on both of them. If any of those can help me, instructions for that would also be nice. Background: I have a RCA-to-USB capture card, which I'm using to transfer VHS casettes and stuff from a video camera to digital format. The problem is that the audio comes out heavily distorted. So instead I connected the audio out from the VCR directly to the computer's line in. This works, but the audio is out of sync, about half a second behind the video. I could spend time trying to fix this issuee, but I think it'll be easier to simply fix the video.

  Read the article

• Stress test speed on a gateway?

  - by TheLQ

  I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• PCI max throughput

  - by allentown

  Hypothetical here, but I want to understand. Say I have a hand me down machine, 4 PCI slots, 64-bit 33 MHz PCI. How much data can that PCI bus handle? System bus is 133 MHz. I want to use one slot for a SATA II card, and the rest for Gig-E cards, building out as fast a NAS as I can. I think one slot may be AGP2x, so that leaves me 2 for Gig-E and one for SATAT II. Will I saturate, what is the max bandwidth of the PCI bus?

  Read the article

• Is it possible to download minimal drivers on Windows, without the extra software packages?

  - by Anton Gogolev

  The situation in all its glory: 30 megs for ATIs' "Display Driver Only". Almost 100 megs for NVidias' GeForce/Ion bloatware. 300 megs for an HP printer driver with immense amount of crap 30 megs for a Realtek integrated sound card driver. 50 megs for a mouse driver ...and dozens and dozens of other similar examples Additinally, UI/UX on vendors' sites is really terrible: I have to carefully pick and choose the exact model of my whatever, although this packages do contain drivers for pretty much every possible hardware model out there. My question is: How and where can I download true minimal drivers without all these ATI "Installation Managers", Realtek GUIs, ASUS tools, etc.?

  Read the article

• WEP key not working on laptop running Ubuntu

  - by stupid-idiot

  I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >