Search Results

Search found 37101 results on 1485 pages for 'array based'.

Page 273/1485 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • Does chunk size affect the read performance of a Linux md software RAID1 array?

    - by OldWolf
    This came up in relation to this question on determining chunk size of an existing RAID array. The general consensus seems to be that chunk size does not apply to RAID1 as it is not striped. On the other hand, the Linux RAID Wiki claims that it will have an affect on read performance. However, I cannot find any benchmarks testing/proving that. Can anyone point to conclusive documentation that it either does or does not affect read performance?

    Read the article

  • Whitepaper list for the application framework

    - by Rick Finley
    We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework).  These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features.  This is reposted from the OUAF blog:  http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management           560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series  A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

    Read the article

  • How to create an array of User Objects in Powerbuilder?

    - by TomatoSandwich
    The application has many different windows. One is a single 'row' window, which relates to a single row of data in a table, say 'Order'. Another is a 'multiple row' datawindow, where each row in the datawindow relates to a row in 'Order', used for spreadsheet-like data entry Functionality extentions have create a detail table, say 'Suppliers', where an order may require multiple suppliers to fill the order. Normally, suppliers are not required, because they are already in the warehouse (0), or there may need to be an order to a supplier to complete an order (1), or multiple suppliers may need to be contacted (more than one). As a single order is entered, once the items are entered, a User Object is populated depending on the status of the items in the warehouse. If required, this creates a 1-to-many relationship between the order and the "backorder". In the PB side, there is a single object uo_backorder which is created on the window, and is referenced by the window depending on the command (button popup, save, etc) I have been tasked to create the 'backorder' functionality on the spreadsheet-line window. Previously the default options for backorders were used when orders were created from the multiple-row window. A workaround already exists where unconfirmed orders could be opened in the single-row window, and the backorder information manipulated there. However, the userbase wants this functionality on the one window. Since the functionality of uo_backorder already exists, I assumed I could just copy the code from the single-order window, but create an array of uo_backorder objects to cope with multiple rows. I tried the following: forward .. type uo_backorder from popupdwpb within w_order_conv end type end forward global type w_order_conv from singleform .. uo_backorder uo_backorder end type type variables .. uo_backorder iuo_backorders[] end variables .. public function boolean iuo_backorders(); .. long ll_count ll_count = UpperBound(iuo_backorders[]) iuo_backorders[ll_count+1] = uo_backorder //THIS ISN'T RIGHT lb_ok = iuo_backorders[ll_count+1].init('w_backorder_popup', '', '', '', 'd_backorder_popup', sqlca, useTransObj()) return lb_ok end function .. <utility functions> .. type uo_backorder from popupdwpb within w_order_conv integer x = 28 integer y = 28 integer width ... end type on uo_backorder.destroy call popupdwpb::destroy end on The issue I face now is that the code commented "THIS ISN'T RIGHT" isn't correct. It is associating the visual object placed on the face of the main window to each array cell, so anytime I reference the array cell object it's actually referencing the one original object, not the new instances that I (thought) I was creating. If I change the code iuo_backorders[ll_count+1] = create uo_backorder the code doesn't run, saying that it failed to initalize the popup window. I think this is related to the class being called the same thing as the instance. What I want to end up with is an array of uo_backorder objects that I can associate to each row of my datawindow (first row = first cell, etc). I think the issue lays in the fact it's a visual object, and I can't seem to get the window to run without adding a dummy object on the face of the window (functionality from the original single-row window). Since it's a VISUAL object, does the object indeed need to be embedded on the windowface for the window to know what object I'm talking about? If so, how does one create multiple windowface objects (one to many, depending on when a row is added)? Don't hesitate to inquire regarding any more information this issue may require from myself. I have no idea what is 'standard' or 'default' in PB, or what is custom and needs more explaining.

    Read the article

  • sending a $_SESSION array to my class and attempting to get the value fro it in a for loop .php

    - by eoin
    i have a class which in which iam using a method to get information from a session array via a for loop the 2 for loops in each method are used 1.to count total amount of items , and 2. to add up the total price but neither seem to be returning anything. im using the total amount to check it against the mc_gross posted value from an IPN and if the values are equal i plan to commit the sale to a database as it has been verified. for the method where im looking to get the total price im getting 0.00 returned to me. i think ive got the syntax wrong here somehow here is my class for purchase the two methods iam having trouble with are the gettotalcost() and gettotalitems() shown below is my class. <?php class purchase { private $itemnames; // from session array private $amountofitems; // from session array private $itemcost; //session array private $saleid; //posted transaction id value to be used in sale and sale item tables private $orderdate; //get current date time to be entered as datetime in sale table private $lastname; //posted from ipn private $firstname; //posted from ipn private $emailadd; //uses sessionarray value public function __construct($saleid,$firstname,$lastname) { $this->itemnames = $_SESSION['itemnames']; $this->amountofitems =$_SESSION['quantity']; $this->itemcost =$_SESSION['price']; $this->saleid = $saleid; $this->firstname = $firstname; $this->lastname = $lastname; $this->emailadd = $SESSION['username']; mail($myemail, "session vardump ", echo var_dump($_SESSION), "From: [email protected]" ); mail($myemail, "session vardump ",count($_SESSION['itemnames']) , "From: [email protected]" ); } public function commit() { $databaseinst = database::getinstance(); $databaseinst->connect(); $numrows = $databaseinst->querydb($query); //to be completed } public function gettotalitems() { $numitems; $i; for($i=0; $i < count($this->amountofitems);$i++) { $numitems += (int) $this->amountofitems[$i]; } return $numitems; } public function gettotalcost() { $totalcost; $i; for($i=0; $i < count($this->amountofitems);$i++) { $numitems = (int) $this->amountofitems[$i]; $costofitem =doubleval($this->itemcost [$i]); $totalcost += $numitems * $costofitem; } return $totalcost; } } ?> and here is where i create an instance of the class and attempt to use it. include("purchase.php"); $purchase = new purchase($_POST['txn_id'],$_POST['first_name'],$_POST['last_name']); $fullamount = $purchase->gettotalcost(); $fullAmount = number_format($fullAmount, 2); $grossAmount = $_POST['mc_gross']; if ($fullAmount != $grossAmount) { $message = "Possible Price Jack attempt! the amount the customer payed is : " . $grossAmount . " which is not equal to the full amount. the price of the products combined is " . $fullAmount. " the transaction number for which is " . $_POST['txn_id'] . "\n\n\n$req"; mail("XXXXXXXXXXXX", "Price Jack attempt ", $message, "From: [email protected]" ); exit(); // exit } thanks for the help in advance! ive also added these lines to my constructor. the mail returns that there is nothing in the vardump uh oh! mail($myemailaddress, "session vardump ", var_dump($_SESSION), "From: [email protected]" ); also added session_start(); at the top of the constructor and it dont work! help

    Read the article

  • What is the best algorithm for this array-comparison problem?

    - by mark
    What is the most efficient for speed algorithm to solve the following problem? Given 6 arrays, D1,D2,D3,D4,D5 and D6 each containing 6 numbers like: D1[0] = number D2[0] = number ...... D6[0] = number D1[1] = another number D2[1] = another number .... ..... .... ...... .... D1[5] = yet another number .... ...... .... Given a second array ST1, containing 1 number: ST1[0] = 6 Given a third array ans, containing 6 numbers: ans[0] = 3, ans[1] = 4, ans[2] = 5, ......ans[5] = 8 Using as index for the arrays D1,D2,D3,D4,D5 and D6, the number that goes from 0, to the number stored in ST1[0] minus one, in this example 6, so from 0 to 6-1, compare each res array against each D array My algorithm so far is: I tried to keep everything unlooped as much as possible. EML := ST1[0] //number contained in ST1[0] EML1 := 0 //start index for the arrays D While EML1 < EML if D1[ELM1] = ans[0] goto two if D2[ELM1] = ans[0] goto two if D3[ELM1] = ans[0] goto two if D4[ELM1] = ans[0] goto two if D5[ELM1] = ans[0] goto two if D6[ELM1] = ans[0] goto two ELM1 = ELM1 + 1 return 0 //If the ans[0] number is not found in either D1[0-6], D2[0-6].... D6[0-6] return 0 which will then exclude ans[0-6] numbers two: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[1] goto three if D2[ELM1] = ans[1] goto three if D3[ELM1] = ans[1] goto three if D4[ELM1] = ans[1] goto three if D5[ELM1] = ans[1] goto three if D6[ELM1] = ans[1] goto three ELM1 = ELM1 + 1 return 0 //If the ans[1] number is not found in either D1[0-6], D2[0-6].... D6[0-6] return 0 which will then exclude ans[0-6] numbers three: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[2] goto four if D2[ELM1] = ans[2] goto four if D3[ELM1] = ans[2] goto four if D4[ELM1] = ans[2] goto four if D5[ELM1] = ans[2] goto four if D6[ELM1] = ans[2] goto four ELM1 = ELM1 + 1 return 0 //If the ans[2] number is not found in either D1[0-6], D2[0-6].... D6[0-6] return 0 which will then exclude ans[0-6] numbers four: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[3] goto five if D2[ELM1] = ans[3] goto five if D3[ELM1] = ans[3] goto five if D4[ELM1] = ans[3] goto five if D5[ELM1] = ans[3] goto five if D6[ELM1] = ans[3] goto five ELM1 = ELM1 + 1 return 0 //If the ans[3] number is not found in either D1[0-6], D2[0-6].... D6[0-6] return 0 which will then exclude ans[0-6] numbers five: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[4] goto six if D2[ELM1] = ans[4] goto six if D3[ELM1] = ans[4] goto six if D4[ELM1] = ans[4] goto six if D5[ELM1] = ans[4] goto six if D6[ELM1] = ans[4] goto six ELM1 = ELM1 + 1 return 0 //If the ans[4] number is not found in either D1[0-6], D2[0-6].... D6[0-6] return 0 which will then exclude ans[0-6] numbers six: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[5] return 1 ////If the ans[1] number is not found in either D1[0-6]..... if D2[ELM1] = ans[5] return 1 which will then include ans[0-6] numbers return 1 if D3[ELM1] = ans[5] return 1 if D4[ELM1] = ans[5] return 1 if D5[ELM1] = ans[5] return 1 if D6[ELM1] = ans[5] return 1 ELM1 = ELM1 + 1 return 0 As language of choice, it would be pure c

    Read the article

  • HP SmartArray P400: How to repair failed logical drive?

    - by TegtmeierDE
    I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

    Read the article

  • How to get rid of a stubborn 'removed' device in mdadm

    - by T.J. Crowder
    One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

    Read the article

  • Degraded RAID5 and no md superblock on one of remaining drive

    - by ark1214
    This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

    Read the article

  • Reconstructing the disk order in RAID 6 with 7 disks

    - by rkotulla
    a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

    Read the article

  • How to do role-based access control for a franchise business?

    - by FreshCode
    I'm building the 2nd iteration of a web-based CRM+CMS for a franchise service business in ASP.NET MVC 2. I need to control access to each franchise's services based on the roles a user is assigned for that franchise. 4 examples: Receptionist should be able to book service jobs in for her "Atlantic Seaboard" franchise, but not do any reporting. Technician should be able to alter service jobs, but not modify invoices. Managers should be able to apply discount to invoices for jobs within their stores. Owner should be able to pull reports for any franchises he owns. Where should franchise-level access control fit in between the Data - Services - Web layer? If it belongs in my Controllers, how should I best implement it? Partial Schema Roles class int ID { get; set; } // primary key for Role string Name { get; set; } Partial Franchises class short ID { get; set; } // primary key for Franchise string Slug { get; set; } // unique key for URL access, eg /{franchise}/{job} string Name { get; set; } UserRoles mapping short FranchiseID; // related to franchises table Guid UserID; // related to Users table int RoleID; // related to Roles table DateTime ValidFrom; DateTime ValidUntil; Background I built the previous CRM in classic ASP and it runs the business well, but it's time for an upgrade to speed up workflow and leave less room for error. For the sake of proper testing and better separation between data and presentation, I decided to implement the repository pattern as seen in Rob Conery's MVC Storefront series. Controller Implementation Access Control with [Authorize] attribute If there was just one franchise involved, I could simply limit access to a controller action like so: [Authorize(Roles="Receptionist, Technician, Manager, Owner")] public ActionResult CreateJob(Job job) { ... } And since franchises don't just pop up over night, perhaps this is a strong case to use the new Areas feature in ASP.NET MVC 2? Or would this lead to duplicate Views? Controllers, URL Routing & Areas Assuming Areas aren't used, what would be the best way to determine which franchise's data is being accessed? I thought of this: {franchise}/{controller}/{action}/{id} or is it better to determine a job's franchise in a Details(...) action and limit a user's action with [Authorize]: {job}/{id}/{action}/{subaction} {invoice}/{id}/{action}/{subaction} which makes more sense if any user could potentially have access to more than one franchise without cluttering the URL with a {franchise} parameter. Any input is appreciated.

    Read the article

  • How to generate custom JSESSIONID, based on some hash of user's data in order to replicate session

    - by Shaman
    Is it possible to override Tomcat's embedded generator of JSESSIONID, to be able to create custom values of this cookie, based on user's login? Why do I need this: I have a load balancer with "sticky sessions", configured to route requests with the same JSESSIONID to the same server, and I want to prevent situation, when same user can start two different sessions on different servers.

    Read the article

  • How to remove a node based on contents of a subnode and then convert to CSV with headers intact

    - by Morris Cox
    I'm downloading a 10MB zipped XML file with wget, unzipping it to 40MB, trying to weed out test and expired entries (if the text of a certain node is "This is a test opportunity. Please DO NOT apply!" or if is in the past), and then convert to CSV. However, I get this error: PHP Notice: Array to string conversion in /home/morris/projects/grantsgov/xml2csv.php on line 46 I get Array errors because some entries in the XML file have more than one occurrence of a node (different text contents). The test entries are still present. Contents of grantsgov.sh: #!/bin/bash wget --clobber "http://www.grants.gov/search/downloadXML.do;jsessionid=1n7GNpNF2tKZnRGLyQqf7Tl32hFJ1zndhfQpLrJJD11TTNzWMwDy!368676377?fname=GrantsDBExtract$(date +'%Y%m%d').zip" -O GrantsDBExtract$(date +"%Y%m%d").zip unzip GrantsDBExtract$(date +"%Y%m%d").zip php xml2csv.php zip GrantsDBExtracted$(date +"%Y%m%d").zip GrantsDBExtracted$(date +"%Y%m%d").csv Contents of xml2csv.php: <? $current_date = date("Ymd"); //$getfile=fopen("http://www.grants.gov/search/downloadXML.do;jsessionid=GqJNNmdLyJyMlsQqTzS2KdzgT5NMdhPp0QhG946JTmHzRltNTpMQ!368676377?fname=GrantsDBExtract$current_date.zip", "r"); $zip = zip_open("GrantsDBExtract$current_date.zip"); if(is_resource($zip)) { while ($zip_entry = zip_read($zip)) { $fp = fopen("./".zip_entry_name($zip_entry), "w"); if (zip_entry_open($zip, $zip_entry, "r")) { $buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry)); fwrite($fp,"$buf"); zip_entry_close($zip_entry); fclose($fp); } } zip_close($zip); } // For future potential use $xml = new DOMDocument('1.0', 'ascii'); $xpath = new DOMXpath($xml); $xslFile = "feddata.xsl"; $filexml="GrantsDBExtract$current_date.xml"; if (file_exists($filexml)) { $xml = simplexml_load_file($filexml); echo "Loaded $filexml\n"; $xslt = new XSLTProcessor(); $xsl = new DOMDocument(); //$XSL->load('feddata.xsl', LIBXML_NOCDATA); $xsl->load($xslFile, LIBXML_NOCDATA); $xslt->importStylesheet($xsl); $xslt->transformToXML($xml); $f = fopen("GrantsDBExtracted$current_date.csv", 'w'); // create the CSV header row on the first time here $first = FALSE; $fields = array(); foreach($record as $key => $value) { $fields[] = $key; } fwrite($f,implode(";",$fields)."\n"); foreach ($xml->FundingOppSynopsis as $fos) { fputcsv($f, get_object_vars($fos),',','"'); } } fclose($f); } else { exit('Failed to open file.'); } ?> Contents of feddata.xsl: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="xml"/> <xsl:template match="node()|@*"> <xsl:copy> <xsl:apply-templates select="node()|@*"/> </xsl:copy> </xsl:template> <xsl:template match="FundingOppSynopsis[AgencyMailingAddress = 'This is a test opportunity. Please DO NOT apply!']"> </xsl:template> </xsl:stylesheet><xsl:strip-space elements="*"/> Part of the XML file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE Grants SYSTEM "http://www.grants.gov/search/dtd/XMLExtract.dtd"> <Grants> <FundingOppSynopsis> <PostDate>08312007</PostDate> <UserID>None</UserID> <Password>None</Password> <FundingInstrumentType>CA</FundingInstrumentType> <FundingActivityCategory>DPR</FundingActivityCategory> <OtherCategoryExplanation>This is a test opportunity. Please DO NOT apply!</OtherCategoryExplanation> <NumberOfAwards>5</NumberOfAwards> <EstimatedFunding>4</EstimatedFunding> <AwardCeiling>2</AwardCeiling> <AwardFloor>1</AwardFloor> <AgencyMailingAddress>This is a test opportunity. Please DO NOT apply!</AgencyMailingAddress> <FundingOppTitle>This is a test opportunity. Please DO NOT apply!</FundingOppTitle> <FundingOppNumber>IVV-08312007-RG-OPP5</FundingOppNumber> <ApplicationsDueDate>09102007</ApplicationsDueDate> <ApplicationsDueDateExplanation>This is a test opportunity. Please DO NOT apply!</ApplicationsDueDateExplanation> <ArchiveDate>10102007</ArchiveDate> <Location>None</Location> <Office>None</Office> <Agency>None</Agency> <FundingOppDescription>This is a test opportunity. Please DO NOT apply!</FundingOppDescription> <CFDANumber>000000</CFDANumber> <EligibilityCategory>21</EligibilityCategory> <AdditionalEligibilityInfo>This is a test opportunity. Please DO NOT apply!</AdditionalEligibilityInfo> <CostSharing>N</CostSharing> <ObtainFundingOppText FundingOppURL="">Not Available</ObtainFundingOppText> <AgencyContact AgencyEmailDescriptor="This is a test opportunity. Please DO NOT apply!" AgencyEmailAddress="This is a test opportunity. Please DO NOT apply!">This is a test opportunity. Please DO NOT apply!</AgencyContact> </FundingOppSynopsis> How can I fix the error and remove expired entries (based on ArchiveDate)? I suspect the second to last line in feddata.xsl needs to be fixed.

    Read the article

  • do console apps run faster than windows based app?

    - by omair iqbal
    i am reletivly new to world of programming i have a few performance questions 1. do console apps run faster than windows based app? 2.are languages like c and pascal faster than object oriented languages like c++ and delphi?i know language speed depends more on compiler than on language itself but do compilers for prcedural languages like c and pascal produce faster code than oo ones like delphi,c++(including c++ compilers that can procuce c code) sorry for my bad english

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >