Search Results

Search found 9431 results on 378 pages for 'bubble sort'.

Page 273/378 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • New Computer freezing up at random

    - by Benjamin Frost
    Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

    Read the article

  • Samba 3.5 Shadow Copy for Windows 7

    - by Prashanth Sundaram
    Over the past several days I have been trying to get the shadow to work with samba but haven’t been successful. Can someone check below config and let me know if I am missing something? We are using Equallogic SAN and iSCSI LUNS to mount volumes. I can cleanly access samba shares on Windows 7 clients but just not shadow copy. I have referred the official how-to but couldn’t get it to work. I see these messages in the logs. Any help is deeply appreciated. [2012/10/31 12:20:53.549863, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. [2012/10/31 12:21:13.887198, 0] modules/vfs_shadow_copy2.c:734(shadow_copy2_get_shadow_copy2_data) shadow:snapdir not found for /fs/test-01 in get_shadow_copy_data [2012/10/31 12:21:13.887265, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. == Samba pkgs == samba-3.5.10-116.el6_2.x86_64 samba-common-3.5.10-116.el6_2.x86_64 samba-winbind-clients-3.5.10-116.el6_2.x86_64 samba-client-3.5.10-116.el6_2.x86_64 === df –h == First is the iSCSI LUN and 2 others are snapshots. /dev/mapper/eql-0-fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01 /dev/mapper/eql-2-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.26-17.32.42/fs/test-01 (SNAPSHOT-1) /dev/mapper/eql-d-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.31-11.52.42/fs/test-01 (SNAPSHOT- 2) ===/etc/samba/smb.conf === [global] workgroup = DOMAIN server string = Samba Server Version %v security = ads realm = DOMAIN.CORP encrypt passwords = yes guest account = nobody map to guest = bad uid log file = /var/log/samba/%m.log domain master = no local master = no preferred master = no os level = 0 load printers = no show add printer wizard = no printable = no printcap name = /dev/null disable spoolss = yes follow symlinks = yes wide links = yes unix extensions = no [test] comment = Test Directories path = /fs/test-01 vfs objects = shadow_copy2 #shadow_copy2: sort = desc #shadow: localtime = yes #shadow: snapdir = /fs/test-01/test #shadow: basedir = /fs/test-01 guest ok = yes writeable = yes map archive = no force create mode = 0660 force directory mode = 2770 inherit owner = yes inherit permissions = yes All feedback is welcome. Thanks!

    Read the article

  • Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

    - by BryCoBat
    I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

    Read the article

  • Windows Server 2008R2 Virtual Lab Activation strategies?

    - by William Hilsum
    I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

    Read the article

  • Write access from a Windows client via a ZFS SMB, to a file created on the host in OpenIndiana

    - by Gerald Kaszuba
    I've got an OpenIndiana server running ZFS that is shared using a nobody user and group. I don't fully understand Solaris ACL permissions, but I do know Linux style permissions. The client is Windows 8 and the server is OpenIndiana is oi_148. I'm failing to work out how to make write permission work correctly for the Windows client. It is able to make new files, but can not modify files created by the shell in OpenIndiana. When a file ("local file") is created locally as the user nobody in bash, and another file ("smb file") created remotely via SMB (as nobody also), they are quite different in permissions: # ls -V -rw-r--r-- 1 nobody nobody 0 Dec 2 12:24 local file owner@:rw-p--aARWcCos:-------:allow group@:r-----a-R-c--s:-------:allow everyone@:r-----a-R-c--s:-------:allow -rwx------+ 1 nobody nobody 0 Dec 2 12:24 smb file user:nobody:rwxpdDaARWcCos:-------:allow group:2147483648:rwxpdDaARWcCos:-------:allow In bash, I'm able to write to smb file, but vice versa, the Windows client is not able to write to local file. This is confusing to me because it appears that it should allow the SMB client to write to local file, because nobody is the owner and it has a w in the ACL. The sharesmb setting is is fairly boring, although I'm hoping there can something to set in here similar to a umask: sharesmb name=shared,guestok=true How can I make these two work together and have a symmetrical permission system, where both SMB and the local user produce the same permissions? Is there some sort of ACL that can set at the root of the file system to allow all files to be created in a similar manner?

    Read the article

  • Odd IIS FTP Failure

    - by Monkey Boson
    We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

    Read the article

  • Can I run a mix of static addressing and NAT?

    - by aroth
    Let's say that an ISP offers a plan with 5 static IP addresses, but I have more than 5 devices, many of which (such as a networked printer, for instance) I do not want or need to have a static IP address. So the topography I'm planning goes something like: ISP -> Router -> Switch -> Computer (static address) -> Computer (static address) -> Printer (DHCP/NAT) -> Tv (DHCP/NAT) -> (...) -> Wireless Devices (DHCP/NAT) Generally speaking, is it possible to run a network like that? If not, then what sort of setup do I need so that I can assign static addresses just to the things that need them, and use DHCP/NAT for everything else? Also, what internal networking devices will consume a static IP address? I'm pretty sure the router will, correct? Does the switch also?

    Read the article

  • DHCP not responding from laptop or router, but works on directly plugged PC?

    - by Matt H
    I'm at my sister in law's place in Singapore. I'm not from Singapore but am here for a few months. She has some sort of cable modem made by motorolla (SB5101 Surfboard). I think it goes, through starhub or similar provider. Anyhow, her PC is directly attached by cable (not wireless) and she can access the internet. There is no wireless router connected to it. The PC is configured with DHCP and appears to be working. However, the moment I unplug her PC and plug in my laptop, it doesn't get an address. The interesting thing here is that I also see this toredo tunnel adaptor etc. I'm not familiar with what that is. It appears to be being assigned an IP v6 address and an IP v4 address. I thought perhaps it's my laptop, but also when I plug in my DDWRT based router, it also fails to get a DHCP assigned address on the WAN port. I can't also seem to connect into any web configuration on the motorolla modem either. Any ideas? what kind of setup is this? all I'd like to do is plug in my wireless router so I can roam around the house and also access the internet.

    Read the article

  • PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending.

    - by Matt
    I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

    Read the article

  • Could this server log mean my server is being used as a proxy?

    - by So Over It
    I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

    Read the article

  • Tips on setting up a virtual lab for self-learning networking topics

    - by Harry
    I'm trying to self-learn the following topics on Linux (preferably Fedora): Network programming (using sockets API), especially across proxies and firewalls Proxies (of various kinds like transparent, http, socks...), Firewalls (iptables) and 'basic' Linux security SNAT, DNAT Network admininstration power tools: nc, socat (with all its options), ssh, openssl, etc etc. Now, I know that, ideally, it would be best if I had 'enough' number of physical nodes and physical network equipment (routers, switches, etc) for this self-learning exercise. But, obviously, don't have the budget or the physical space, nor want to be wasteful -- especially, when things could perhaps be simulated/emulated in a Linux environment. I have got one personal workstation, which is a single-homed Fedora desktop with 4GB memory, 200+ GB disk, and a 4-core CPU. I may be able to get 3 to 4 additional low-end Fedora workstations. But all of these -- including mine -- will always remain strictly behind our corporate firewall :-( Now, I know I could use VirtualBox-based virtual nodes, but don't know if there are any better alternatives disk- and memory- footprint-wise. Would you be able to give me some tips or suggestions on how to get started setting up this little budget- and space-constrained 'virtual lab' of mine? For example, how would I create virtual routers? Has someone attempted this sort of thing before: namely, creating a virtual network lab behind a corporate firewall for learning/development/testing purposes? I hope my question is not vague or too open-ended. Basically, right now, I don't know how to best leverage the Linux environment and the various 'goodies' it comes with, and buying physical devices only when it is absolutely necessary.

    Read the article

  • Splitting Servers into Two Groups

    - by Matt Hanson
    At our organization, we're looking at implementing some sort of informal internal policy for server maintenance. What we're looking at doing is completing maintenance on our entire server pool every two months; each month we'll do half of the servers. What I'm trying to figure out is some way to split the servers into the two groups. Our naming convention isn't much to be desired (but getting better) so by name or number doesn't really work. I can easily take a list of all the servers and split them in two, but with new servers are being added constantly, and old ones retired, that list would be a headache to maintain. I'd like to look at any given server and know if it should have its maintenance done this month or next. For example, it would be nice to look at the serial number. If it started with an even number, then it gets maintenance done on even months and vice-versa. This example won't work though as a little over half of the servers are virtual. Any ideas?

    Read the article

  • Socket options for a tcp server with 3G clients & frequent disconnections

    - by Joel
    I have a TCP server, written in java, sending and receiving many short messages, from 500 bytes to 100 KB long. It's a chess game and chat server, to make it simple. The server is running Debian 6. Half of the clients are connecting from 3G networks, and half over standard DSL. A portion of the 3G clients lose connection pretty often. The error I get on the server and on the client socket is Connection reset. I have come across this page at Oracle documentation: socketOpt. I am wondering what I could tune there to lower the number of disconnections from 3G clients. I don't mind about the ping or transfer rate, but just about the TCP disconnections. I am not skilled enough to understand the impact of each setting, but I sort of understood that the TCP window was important, although I don't know exactly how. So I'm asking if anyone here has an idea ? Thanks if you can help.

    Read the article

  • Windows Server 2003 DHCP not handing out IPs

    - by SnOrfus
    I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

    Read the article

  • GRE Tunnel over IPsec with Loopback

    - by Alek
    I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

    Read the article

  • Vagrant up doesn't load chef configs and doesn't keep an error log

    - by la_f0ka
    I'm trying to set up a vagrant box and I'm running with all sort of troubles. Right now I'm getting a strange error message where it states there's a stack trace file with more info, but that file is no where to be found. This is the error: stdin: is not a tty [Sun, 16 Sep 2012 18:31:47 +0000] INFO: *** Chef 0.10.0 *** [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Setting the run_list to ["recipe[apt]", "recipe[openssl]", "recipe[apache2]", "recipe[mysql]", "recipe[mysql::server]", "recipe[php]", "recipe[php::module_apc]", "recipe[php::module_curl]", "recipe[php::module_mysql]", "recipe[apache2::mod_php5]", "recipe[apache2::mod_rewrite]"] from JSON [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List is [recipe[apt], recipe[openssl], recipe[apache2], recipe[mysql], recipe[mysql::server], recipe[php], recipe[php::module_apc], recipe[php::module_curl], recipe[php::module_mysql], recipe[apache2::mod_php5], recipe[apache2::mod_rewrite]] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List expands to [apt, openssl, apache2, mysql, mysql::server, php, php::module_apc, php::module_curl, php::module_mysql, apache2::mod_php5, apache2::mod_rewrite] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Starting Chef Run for natty.talifun.com [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Running exception handlers [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Exception handlers complete [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: Stacktrace dumped to /tmp/vagrant-chef-1/chef-stacktrace.out [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: NameError: wrong constant name Chef-symfony2Console Chef never successfully completed! Any errors should be visible in the output above. Please fix your recipes so that they properly complete. And this is what my vagrantfile looks like: Vagrant::Config.run do |config| config.vm.box = "ubuntu-1104-server-i386" config.vm.network :hostonly, "33.33.33.33" config.vm.forward_port 80, 8000 config.vm.share_folder "symfony.tests", "/var/www/symfony.tests", "data", :nfs => true config.vm.provision :chef_solo do |chef| chef.cookbooks_path = ["../my-recipes/cookbooks", "site-cookbooks"] chef.add_recipe "apt" chef.add_recipe "openssl" chef.add_recipe "apache2" chef.add_recipe "mysql" chef.add_recipe "mysql::server" chef.add_recipe "php" chef.add_recipe "php::module_apc" chef.add_recipe "php::module_curl" chef.add_recipe "php::module_mysql" chef.add_recipe "apache2::mod_php5" chef.add_recipe "apache2::mod_rewrite" chef.add_recipe "Symfony" chef.json = { :mysql => { :server_root_password => 'root', :bind_address => '127.0.0.1' } } end end

    Read the article

  • Does water damage a fiber optic / cat5 cable

    - by chris
    One of the buildings I support recently had an adventure with a broken fire sprinkler. Lots of water everywhere. One of the "drains" the water used was the vertical risers between network closets. The cable plant in this building has bundles of cat5e as well as conduit with bundles of multimode fiber optic cables. The fiber is standard multi strand plenum rated stuff that terminates in boxes that have the patches to the switches. As far as I can tell, no water got near the ends of the cables (fiber or copper) but the conduit was saturated, and is likely still saturated because there isn't any air flow to dry the cables out. My gut reaction is that while it didn't do the cables any favors, it likely also isn't going to cause any problems. A little more reading / googling around leads me to believe that the water may cause problems down the road. Some pretty pictures so everyone knows what I'm talking about: Fiber conduit: Vertical riser, going down: Vertical riser, going up: Does anyone have any experience with this sort of damage and how to deal with it? Should we just ask the insurance adjuster to add "pull new structured cable" to the list of things to be replaced? And, if the opinion is "replace it because it'll start failing randomly over time" please include links that describe the specific failure modes, so I've got some ammo to use with the adjuster.

    Read the article

  • Clustering/load balancing for cluster unaware applications

    - by AaronLS
    Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

    Read the article

  • Bash wonkyness on Ubuntu versus RHEL

    - by d34dh0r53
    Fellow faulters, I'm playing around with a one liner that I've developed on a RHEL 5.4 box and I have it working perfectly: TOTAL_RAM=`free | grep Mem: | awk '{ print $2 }'`; \ ps axo rss,comm,pid | awk -v total_ram=$TOTAL_RAM \ '{ proc_list[$2] += $1; } END { for (proc in proc_list) \ { proc_pct = (proc_list[proc]/total_ram)*100; printf("%d\t%s\t%0.2f%\n", proc_list[proc],proc,proc_pct); }}' \ | sort -n | tail -n 10 Which outputs something like the following on my RHEL box: 3736 logmon 0.01% 4156 EvMgrC 0.01% 4692 hald 0.01% 5020 ntpd 0.02% 6252 sshd 0.02% 7784 cvd 0.02% 9224 snmpd 0.03% 13068 dsm_sa_datamgr3 0.04% 23320 dsm_om_connsvc3 0.07% 4249864 mysqld 12.90% However on my Ubuntu 9.04 slice I get this: awk: run time error: not enough arguments passed to printf("%d %s %0.2f% ") FILENAME="-" FNR=104 NR=104 33248 console-kit-dae 3.17 I think it has to be bash that is borking something, but I'm really not doing anything that should be that bash specific. The RHEL box is running: # yum info bash | grep -e Version -e Release Version : 3.2 Release : 24.el5 And the Ubuntu box: # apt-cache show bash | grep -e Version Version: 3.2-5ubuntu1 I haven't dug into this super deeply, and thought I'd ping my fellow johnnys to see if you've ever run across this before. /bow

    Read the article

  • Server reporting incorrect mime type for css files

    - by Becky
    We have a VPS server that we host our websites on. I have written a CMS using CodeIgniter. On one of the interfaces, I am attempting to upload a css file to the system. This worked correctly when we had it hosted on shared hosting. Since we've moved it to the VPS, I am getting an "incorrect filetype" error. It all comes down to the fact that the server is reporting a mime type of text/x-c for the css file rather than text/css. I logged in via shell and ran the following command on an existing valid css file (to make sure it wasn't an issue with either CodeIgniter or with php). file --brief --mime 'filename.css' 2>&1 The server gave me the following in response to my command: text/x-c; charset=us-ascii My question ... is there some sort of server setting that I need to tweak to get the server to correctly identify the css file as text/css? Do I just have to add a mime type for the css files to the server? I found the mime types file (etc/mime.types), and it just hase video types and a couple other that I have no idea what they are. There is nothing in there for css or images or html files. Unless I'm looking in the wrong spot. I'm not a server person, so I'm hoping someone can help me out. Some server specs: Apache/2.2.22 (Unix) php 5.3.13 Server API = CGI/FastCGI the fileinfo php extension appears to be disabled

    Read the article

  • What configuration changes can I make to speed up extremely slow Windows VM's in ESXi 4.0.

    - by Shawn Anderson
    I've recently moved from VMWare Server to ESXi 4.0. Running on Dell T310. My VM's have been restored but they are running dog slow compared to VMWare Server. I loaded ESXi 4.0 using only default values. Where are some areas where I can tweak the performance? Even logging onto the VM's can be extremely sluggish. Trying to install software on any of them is a new experience in pain. Dell PowerEdge T310 Xeon X3460 2.80 GHz 32 GB RAM 1 HD (2 TB) I have 16 VM's on this server, but only six or so will be running during my testing. I keep an eye on the Resource Allocation and Performance tabs for the host and I never see CPU or RAM getting anywhere close to pegged. Events tab does show some notices for video RAM issues and some hints on Windows activation issues, but nothing that would point to the sort of sluggishness that I'm experiencing. 1 Windows Server 2008 R2 (64-bit) - 4 GB RAM 1 Windows 7 (32-bit) - 2 GB RAM 1 Vista (32-bit) - 1 GB RAM 3 XP (32-bit) - 1 GB RAM Over to you! Thanks - Shawn

    Read the article

  • Issues with sustained traffic with PFSense

    - by Farseeker
    Last week we had to replace our PFSense firewall because it had a catastrophic hardware failure. All but one of the NICs were taken out of the old server and put into the new one. The one NIC that was not moved was the LAN NIC as this is on-board. The other NICs are all WAN connections and the must all be present (i.e. I can't disable one just for the sake of testing) After re-installing PFSense and restoring our backup of the configuration, everything came back online just fine, however on the new hardware any download that takes longer than about 10 seconds just times out in the middle. Example 1: Downloading from Microsoft.com goes at about 900k/sec and times out after about 10 seconds (thus, just under 10Mb of content) Example 2: Downloading from cnet.com goes at about 300k/sec and times out after about 10 seconds (thus, about 3Mb of content). By times out, I mean that the download just stops, and you have to pause/resume to get the next part done, repeat and rinse until the download is complete. However it's not consistant, sometimes it's 10 seconds, sometimes it's 4 seconds, and it sometimes you can't even load a heavy HTML page because the page never finishes. I assume this is most likely because PFSense does not like the onboard NIC, as this is the primary difference between the two servers. It's recognised as NFE0, and there's no room in the server for any more NICs and I don't have any dual-port NICs handy to experiment with a different LAN connection. I've never had to troubleshoot this sort of issue before. Can anyone give me some pointers about where to start? Linux is not my forte so please be kind!

    Read the article

  • Remote desktop solution where the desktop sharing party contacts the computer it wants to share with

    - by Kent
    I'm in a situation where I act as a sort of techinical support to my family and less techinically experienced friends. I'm looking for a remote desktop solution where it's possible to setup a "zero-install, double click an icon"-solution where the client computer contacts me so that I may interact with their desktop. The last part is important as the people in need of my help don't know how to configure their router or even the firewall software on their own computer. They are able to click an accept button when asked if a program should be able to make outgoing connections. They have many different kinds of routers, as well as software firewalls, and I rather not deal with the problem of how to connect to them using whatever as well as the actual problem they are having. It must be: Free of charge for non-commercial use. Possible to use it in a mode where the computer wanting to share its desktop should be able to make a connection to my computer. My computer has a DNS name we can use. Compatible with both Windows XP and Windows 7. Independent of a third party server or infrastructure. Explanations of the above: I don't want to spend money on it when I help them for free. If it's free as in freedom, all the better! I guess this boils down to being callable like showdesktopto.exe opscomputer.com where opscomputer.com is my computers DNS name. If that is possible then I can create a shortcut they can use to connect to me when they need help. It's nice if it's possible to specify a password or key file which I can use to authenticate myself, but it's not required. They use the OS which their machine comes installed with. That means Windows XP or 7. I want something which will work in the long run. Using a third party service which might not be available when I need it disqualified such solutions.

    Read the article

  • On Windows XP, Start > Run "My Documents" sometimes doesn't work

    - by Clayton Hughes
    On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

    Read the article

  • New virtualization project and old SAN

    - by Chris
    Hi, We'll start shortly a partial virtualization of our infrastructure and consolidate a dozen servers into virtuals instances. We'll also add some client application virtualization into the mix for good measure. Two HP DL 380 with the new xeons 56xx and 96 GB of memory each running xenserver + xenapp will then take charge of most of our IT needs. So far, so good. One element that is missing from the picture is the storage part. We need some sort of shared storage to enable live motion and other HA features. We have an IBM DS 4300 SAN that we can use for that. But since it's in production since 2005, I'm not sure about such a critical role for a 5yr old part. So my question is: What is the reliability of this kind of equipment after 5 yr ? Can it last 10 yr with no or few problems ? Since our budjet is tight, not buying another SAN will be a big plus. This lead me to another question: FC disks cost an arm and a leg from IBM. When I type the replacement # in google (for example IBM 300GB 15K 4GBPS FC HDD 42D0410), I can find it at a fraction of the price at various sites. So am I stupid to buy from IBM or naive to trust 3rd party reseller ?? Thanks, Chris

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >