Search Results

Search found 7850 results on 314 pages for 'except'.

Page 274/314 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• Patch an Existing NK.BIN

  - by Kate Moss' Open Space

  As you know, we can use MAKEIMG.EXE tool to create OS Image file, NK.BIN, or ROMIMAGE.EXE with a BIB for more accurate. But what if the image file is already created but need to be patched or you want to extract a file from NK.BIN? The Platform Builder provide many useful command line utilities, and today I am going to introduce one, BINMOD.EXE. http://msdn.microsoft.com/en-us/library/ee504622.aspx is the official page for BINMOD tool. As the page says, The BinMod Tool (binmod.exe) extracts files from a run-time image, and replaces files in a run-time image and its usage binmod [-i imagename] [-r replacement_filename.ext | -e extraction_filename.ext] This is a simple tool and is easy to use, if we want to extract a file from nk.bin, just type binmod –i nk.bin –e filename.ext And that's it! Or use can try -r command to replace a file inside NK.BIN. The small tool is good but there is a limitation; due to the files in MODULES section are fixed up during ROMIMAGE so the original file format is not preserved, therefore extract or replace file in MODULE section will be impossible. So just like this small tool, this post supposed to be end here, right? Nah... It is not that easy. Just try the above example, and you will find, the tool is not work! Double check the file is in FILES section and the NK.BIN is good, but it just quits. Before you throw away this useless toy, we can try to fix it! Yes, the source of this tool is available in your CE6, private\winceos\COREOS\nk\tools\romimage\binmod. As it is a tool run in your Windows so you need to Windows SDK or Visual Studio to build the code. (I am going to save you some time by skipping the detail as building a desktop console mode program is fairly trivial) The cbinmod.cpp is the core logic for this program and follow up the error message we got, it looks like the following code is suspected.   //   // Extra sanity check...   //   if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast &&       (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast)   {     dprintf("Found pTOC  = 0x%08x\n", (DWORD)dwpTOC);     fFoundIt = true;     break;   }    else    {     dprintf("NOTICE! Record %d looked like a TOC except DLL first = 0x%08X, and DLL last = 0x%08X\r\n", i, pTOCLoc->dllfirst, pTOCLoc->dlllast);   } The logic checks if dllfirst <= dlllast but look closer, the code only separated the high/low WORD from dllfirst but does not apply the same to dlllast, is that on purpose or a bug? While the TOC is created by ROMIMAGE.EXE, so let's move to ROMIMAGE. In private\winceos\coreos\nk\tools\romimage\romimage\bin.cpp    Module::s_romhdr.dllfirst  = (HIWORD(xip_mem->dll_data_bottom) << 16) | HIWORD(xip_mem->kernel_dll_bottom);   Module::s_romhdr.dlllast   = (HIWORD(xip_mem->dll_data_top) << 16)    | HIWORD(xip_mem->kernel_dll_top); It is clear now, the high word of dll first is the upper 16 bits of XIP DLL bottom and the low word is the upper 16 bits of kernel dll bottom; also, the high word of dll last is the upper 16 bits of XIP DLL top and the low word is the upper 16 bits of kernel dll top. Obviously, the correct statement should be if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(HIWORD(pTOCLoc->dlllast) << 16) &&    (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(LOWORD(pTOCLoc->dlllast) << 16)) So update the code like this should fix this issue or just like the comment, it is an extra sanity check, you can just get rid of it, either way can make the code moving forward and everything worked as advertised.  "Extracting out copies of files from the nk.bin... replacing files... etc." Since the NK.BIN can be compressed, so the BinMod needs the compress.dll to decompress the data, the DLL can be found in C:\program files\microsoft platform builder\6.00\cepb\idevs\imgutils.

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• Tuning Red Gate: #4 of Some

  - by Grant Fritchey

  First time connecting to these servers directly (keys to the kingdom, bwa-ha-ha-ha. oh, excuse me), so I'm going to take a look at the server properties, just to see if there are any issues there. Max memory is set, cool, first possible silly mistake clear. In fact, these look to be nicely set up. Oh, I'd like to see the ANSI Standards set by default, but it's not a big deal. The default location for database data is the F:\ drive, where I saw all the activity last time. Cool, the people maintaining the servers in our company listen, parallelism threshold is set to 35 and optimize for ad hoc is enabled. No shocks, no surprises. The basic setup is appropriate. On to the problem database. Nothing wrong in the properties. The database is in SIMPLE recovery, but I think it's a reporting system, so no worries there. Again, I'd prefer to see the ANSI settings for connections, but that's the worst thing I can see. Time to look at the queries, tables, indexes and statistics because all the information I've collected over the last several days suggests that we're not looking at a systemic problem (except possibly not enough memory), but at the traditional tuning issues. I just want to note that, I started looking at the system, not the queries. So should you when tuning your environment. I know, from the data collected through SQL Monitor, what my top poor performing queries are, and the most frequently called, etc. I'm starting with the most frequently called. I'm going to get the execution plan for this thing out of the cache (although, with the cache dumping constantly, I might not get it). And it's not there. Called 1.3 million times over the last 3 days, but it's not in cache. Wow. OK. I'll see what's in cache for this database: SELECT  deqs.creation_time,         deqs.execution_count,         deqs.max_logical_reads,         deqs.max_elapsed_time,         deqs.total_logical_reads,         deqs.total_elapsed_time,         deqp.query_plan,         SUBSTRING(dest.text, (deqs.statement_start_offset / 2) + 1,                   (deqs.statement_end_offset - deqs.statement_start_offset) / 2                   + 1) AS QueryStatement FROM    sys.dm_exec_query_stats AS deqs         CROSS APPLY sys.dm_exec_sql_text(deqs.sql_handle) AS dest         CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp WHERE   dest.dbid = DB_ID('Warehouse') AND deqs.statement_end_offset > 0 AND deqs.statement_start_offset > 0 ORDER BY deqs.max_logical_reads DESC ; And looking at the most expensive operation, we have our first bad boy: Multiple table scans against very large sets of data and a sort operation. a sort operation? It's an insert. Oh, I see, the table is a heap, so it's doing an insert, then sorting the data and then inserting into the primary key. First question, why isn't this a clustered index? Let's look at some more of the queries. The next one is deceiving. Here's the query plan: You're thinking to yourself, what's the big deal? Well, what if I told you that this thing had 8036318 reads? I know, you're looking at skinny little pipes. Know why? Table variable. Estimated number of rows = 1. Actual number of rows. well, I'm betting several more than one considering it's read 8 MILLION pages off the disk in a single execution. We have a serious and real tuning candidate. Oh, and I missed this, it's loading the table variable from a user defined function. Let me check, let me check. YES! A multi-statement table valued user defined function. And another tuning opportunity. This one's a beauty, seriously. Did I also mention that they're doing a hash against all the columns in the physical table. I'm sure that won't lead to scans of a 500,000 row table, no, not at all. OK. I lied. Of course it is. At least it's on the top part of the Loop which means the scan is only executed once. I just did a cursory check on the next several poor performers. all calling the UDF. I think I found a big tuning opportunity. At this point, I'm typing up internal emails for the company. Someone just had their baby called ugly. In addition to a series of suggested changes that we need to implement, I'm also apologizing for being such an unkind monster as to question whether that third eye & those flippers belong on such an otherwise lovely child.

  Read the article

• So you want a French Site?

  - by juanlarios

  I thought I would write a quick write up of how to create a french site in SharePoint 2007. I'm not talking about a Variation but just a plain French Site from the ground up. There were some gotchas that I felt were worth blogging about. First:  go to Microsoft Telnet Article and follow the install instructions. Make sure that when you get to the download page that you select "French" as part of the drop down and you download and install the right language pack. I noticed that if you did not click the "change" button enven though I selected the 'french' language pack, it reverted back to the english language pack.   Second: You will notice a couple of things. When you go to central admin you will see the following:    Now you can pick between french site or english. You will get this if you install other language packs and they will be listed in the drop down. You will notice that you now have french headings and frech listings of sites. You see "Publishing" as a heading because I have a custom site definition that I deployed as a french site. Third: As you start navigating around and trying to create document libraries or sites you will start getting errors. Errors like the following: "Cannot make a cache safe URL for "SelectorControls.js", file not found. Please verify that the file exists under the layouts directory. " Troubleshoot issues with Windows SharePoint Services. Once you resolve the issue with this "js" file, you will find that there are other js files that are missing. The only problem is that if you are not fluent in French or the language you are trying to deploy, Well, you'll have a tough time understanding error messages as they will all be in the new language you are trying to deploy. So let's just talk about what happened when you installed the language pack. In the 12 Hive:  12/Template    you will now see a 1033 folder and a 1036 folder. The 1036 folder is the folder that was created and added as part of the language pack. What the above error is saying is that now that it's looking at the 1036 folder, well, it's missing some files. The nice thing is that these files are included in the 1033 folder (which is the English Language Pack). Simply copy and paste the controls from the one folder to the other. There will be more than one conflict so you will have to move serveral controls over. Can't remember how many but simply add them as error messages come up. I had to add some navigation controls and some content selectors.   Now that's all that you need to install the Frech Language pack anc reate site collections that are entirely in a another language. Do not mistake this with Variations, where you can have multiple language sites. For those of you doing a little bit extra with this, let me share what I was doing extra and what I needed to get it working for me. I had had a custom site definition which was obviously not showing up in my selection of french sites. I was under the impression that all sites in English would show up in french and that the sites were simply routed to a new Resource file for french content. And that is the case but there is a little extra that needs to be done if you have a custom site definition deployed:  First: Under hive 12/Template/1033/XML  there is a listing of site definition files that are deployed to the English side of things. If you navigate to 12/Template/1036/XML  and open one of the site definitions you will see that they are similar and reference the existing site definitions installed on the server, except that they have some french added to descriptions and names. Simply copy the xml file of your custom template to the 1036 folder to have it show up as a selection when you select French as the dropdown entry when create a site colleciton. You can go ahead and change the description and name to suit the language it's under.    Second: As part of my site definition, I packaed up several list templates, that were saved as STP files. When you navigate to the list template listing, well, the templates are for English sites, not French so I cannot create document libraries based on the template. What now? well here comes KWIzCom to the rescue! They seem to have put out a "STP language converter" where you can take a site template or list template and convert it to any target language you are after. It's a free download, Use it and you're good to go.  One thing I will mention is that when I convereted the English documents I whent ahead and converted them to French-Canadien. And it didn't work! so I finally figured out that the French Version it was expecting in the french site was "French-France". Don't know why that is, it's just what needs to be done to get that working. When I did that, I was able to use the List templates that I created in the English site for the French Site.   Hope it helps , good luck!

  Read the article

• Virtual host in Apache Zend

  - by llocani

  I'd like to ask you if you can tell me why I can't get Vhost in Apache to work my Vhostconf is: NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] DocumentRoot "E:/Archivos de programa/Zend/Apache2/htdocs" ServerName localhost <Directory "E:/Archivos de programa/Zend/Apache2/htdocs"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> #AllowOveride all </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands" ServerName healinghands.loc <Directory "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands/logs/error.log" CustomLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands/logs/access.log" common #AllowOveride all </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects" ServerName dev.loc <Directory "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/logs/error.log" CustomLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/logs/access.log" common #AllowOveride all </VirtualHost> My httpd.conf is: ServerRoot "E:\Archivos de programa\Zend\Apache2" Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule filter_module modules/mod_filter.so LoadModule headers_module modules/mod_headers.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so LoadModule userdir_module modules/mod_userdir.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> ServerAdmin [email protected] DocumentRoot "E:\Archivos de programa\Zend\Apache2/htdocs" <Directory /> Options FollowSymLinks AllowOverride all Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.php index.html home.php </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> Alias /NetBeansProjects "E:\Documents and Settings\dvieira\Mis documentos\NetBeansProjects" ScriptAlias /cgi-bin/ "E:\Archivos de programa\Zend\Apache2/cgi-bin/" </IfModule> <IfModule cgid_module> </IfModule> <Directory "E:\Archivos de programa\Zend\Apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-vhosts.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include "conf/zend.conf" NameVirtualHost *:80 <VirtualHost *:80> Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/zend-default-vhost-80.conf" </VirtualHost> Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/globals-*.conf" Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/vhost_*.conf" And my host in Windows: 127.0.0.1 localhost 127.0.0.1 healinghands.loc 127.0.0.1 dev.loc And I can't get any of the browser to recognize dev.loc or healinghands.loc but a ping does it. Localhost is working fine. I've spent 3 days now traying to solve this for my one but I finally quit and have to ask. The error should be this Error Code 11002: host not found. Background: this error indicates that the gateway could not find an authoritative DNS server for the website you are trying to access. Date: 5/20/2013 5:51:03 PM Server: Source: DNS problem. i'd like to add this ping Haciendo ping a healinghands.loc [127.0.0.1] con 32 bytes de datos: Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Estadísticas de ping para 127.0.0.1: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms Today i've tryed something: i've add this domains into the exceptions of mi ie proxy config. This worked for healinghands.loc but not for dev.loc i really do not understand why, both config are exactly the same except for de documentroot. I will continue searching

  Read the article

• Why is my Ubuntu system not using the correct kernel?

  - by Brooks Moses

  We're having a bit of confusion on a Ubuntu remote system -- /boot/grub/menu.lst suggests the system should boot into kernel 2.6.35-30-generic, but it is actually running kernel 2.6.32-27-generic. Where should I look to start figuring out why this is happening and how to fix it? Specifically, /boot/grub/menu.lst has default 0 and the first entry is title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2- ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic Further, I've confirmed that /boot/vmlinuz-2.6.35-30-generic and /boot/initrd.img-2.6.35-30-generic exist and have appropriate permissions. Meanwhile, uname -a returns: $ uname -a Linux cuda2 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64 GNU/Linux Edit: I've also tried re-running update-grub, and rebooting; no luck. Here's the full menu.lst, as requested by a commenter: # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro ## default grub root device ## e.g. groot=(hd0,0) # groot=67717ee3-cbf9-45d2-ae97-820256f4c4fd ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.35-30-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.32-32-server uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-32-server (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-27-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-27-generic title Ubuntu 10.10, kernel 2.6.32-27-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-27-generic title Chainload into GRUB 2 root 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST To add complication and joy to my life, this is a desktop machine in a remote datacenter; we don't have either local access or serial-console access. Suggestions?

  Read the article

• User-Defined Customer Events & their impact (FA Type Profile)

  - by Rajesh Sharma

  CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.  

  Read the article

• MCM Lab exam this week

  - by Rob Farley

  In two days I’ll’ve finished the MCM Lab exam, 88-971. If you do an internet search for 88-971, it’ll tell you the answer is –883. Obviously. It’ll also give you a link to the actual exam page, which is useful too, once you’ve finished being distracted by the calculator instead of going to the thing you’re actually looking for. (Do people actually search the internet for the results of mathematical questions? Really?) The list of Skills Measured for this exam is quite short, but can essentially be broken down into one word “Anything”. The Preparation Materials section is even better. Classroom Training – none available. Microsoft E-Learning – none available. Microsoft Press Books – none available. Practice Tests – none available. But there are links to Readiness Videos and a page which has no resources listed, but tells you a list of people who have already qualified. Three in Australia who have MCM SQL Server 2008 so far. The list doesn’t include some of the latest batch, such as Jason Strate or Tom LaRock. I’ve used SQL Server for almost 15 years. During that time I’ve been awarded SQL Server MVP seven times, but the MVP award doesn’t actually mean all that much when considering this particular certification. I know lots of MVPs who have tried this particular exam and failed – including Jason and Tom. Right now, I have no idea whether I’ll pass or not. People tell me I’ll pass no problem, but I honestly have no idea. There’s something about that “Anything” aspect that worries me. I keep looking at the list of things in the Readiness Videos, and think to myself “I’m comfortable with Resource Governor (or whatever) – that should be fine.” Except that then I feel like I maybe don’t know all the different things that can go wrong with Resource Governor (or whatever), and I wonder what kind of situations I’ll be faced with. And then I find myself looking through the stuff that’s explained in the videos, and wondering what kinds of things I should know that I don’t, and then I get amazingly bored and frustrated (after all, I tell people that these exams aren’t supposed to be studied for – you’ve been studying for the last 15 years, right?), and I figure “What’s the worst that can happen? A fail?” I’m told that the exam provides a list of scenarios (maybe 14 of them?) and you have 5.5 hours to complete them. When I say “complete”, I mean complete – you don’t get to leave them unfinished, that’ll get you ‘nil points’ for that scenario. Apparently no-one gets to complete all of them. Now, I’m a consultant. I get called on to fix the problems that people have on their SQL boxes. Sometimes this involves fixing corruption. Sometimes it’s figuring out some performance problem. Sometimes it’s as straight forward as getting past a full transaction log; sometimes it’s as tricky as recovering a database that has lost its metadata, without backups. Most situations aren’t a problem, but I also have the confidence of being able to do internet searches to verify my maths (in case I forget it’s –883). In the exam, I’ll have maybe twenty minutes per scenario (but if I need longer, I’ll have to take longer – no point in stopping half way if it takes more than twenty minutes, unless I don’t see an end coming up), so I’ll have time constraints too. And of course, I won’t have any of my usual tools. I can’t take scripts in, I can’t take staff members. Hopefully I can use the coffee machine that will be in the room. I figure it’s going to feel like one of those days when I’ve gone into a client site, and found that the problems are way worse than I expected, and that the site is down, with people standing over me needing me to get things right first time... ...so it should be fine, I’ve done that before. :) If I do fail, it won’t make me any less of a consultant. It won’t make me any less able to help all of my clients (including you if you get in touch – hehe), it’ll just mean that the particular problem might’ve taken me more than the twenty minutes that the exam gave me. @rob_farley PS: Apparently the done thing is to NOT advertise that you’re sitting the exam at a particular time, only that you’re expecting to take it at some point in the future. I think it’s akin to the idea of not telling people you’re pregnant for the first few months – it’s just in case the worst happens. Personally, I’m happy to tell you all that I’m going to take this exam the day after tomorrow (which is the 19th in the US, the 20th here). If I end up failing, you can all commiserate and tell me that I’m not actually as unqualified as I feel.

  Read the article

• Top ten things that don't make sense in The Walking Dead

  - by iamjames

  For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

  Read the article

• Goto for the Java Programming Language

  - by darcy

  Work on JDK 8 is well-underway, but we thought this late-breaking JEP for another language change for the platform couldn't wait another day before being published. Title: Goto for the Java Programming Language Author: Joseph D. Darcy Organization: Oracle. Created: 2012/04/01 Type: Feature State: Funded Exposure: Open Component: core/lang Scope: SE JSR: 901 MR Discussion: compiler dash dev at openjdk dot java dot net Start: 2012/Q2 Effort: XS Duration: S Template: 1.0 Reviewed-by: Duke Endorsed-by: Edsger Dijkstra Funded-by: Blue Sun Corporation Summary Provide the benefits of the time-testing goto control structure to Java programs. The Java language has a history of adding new control structures over time, the assert statement in 1.4, the enhanced for-loop in 1.5,and try-with-resources in 7. Having support for goto is long-overdue and simple to implement since the JVM already has goto instructions. Success Metrics The goto statement will allow inefficient and verbose recursive algorithms and explicit loops to be replaced with more compact code. The effort will be a success if at least twenty five percent of the JDK's explicit loops are replaced with goto's. Coordination with IDE vendors is expected to help facilitate this goal. Motivation The goto construct offers numerous benefits to the Java platform, from increased expressiveness, to more compact code, to providing new programming paradigms to appeal to a broader demographic. In JDK 8, there is a renewed focus on using the Java platform on embedded devices with more modest resources than desktop or server environments. In such contexts, static and dynamic memory footprint is a concern. One significant component of footprint is the code attribute of class files and certain classes of important algorithms can be expressed more compactly using goto than using other constructs, saving footprint. For example, to implement state machines recursively, some parties have asked for the JVM to support tail calls, that is, to perform a complex transformation with security implications to turn a method call into a goto. Such complicated machinery should not be assumed for an embedded context. A better solution is just to expose to the programmer the desired functionality, goto. The web has familiarized users with a model of traversing links among different HTML pages in a free-form fashion with some state being maintained on the side, such as login credentials, to effect behavior. This is exactly the programming model of goto and code. While in the past this has been derided as leading to "spaghetti code," spaghetti is a tasty and nutritious meal for programmers, unlike quiche. The invokedynamic instruction added by JSR 292 exposes the JVM's linkage operation to programmers. This is a low-level operation that can be leveraged by sophisticated programmers. Likewise, goto is a also a low-level operation that should not be hidden from programmers who can use more efficient idioms. Some may object that goto was consciously excluded from the original design of Java as one of the removed feature from C and C++. However, the designers of the Java programming languages have revisited these removals before. The enum construct was also left out only to be added in JDK 5 and multiple inheritance was left out, only to be added back by the virtual extension method methods of Project Lambda. As a living language, the needs of the growing Java community today should be used to judge what features are needed in the platform tomorrow; the language should not be forever bound by the decisions of the past. Description From its initial version, the JVM has had two instructions for unconditional transfer of control within a method, goto (0xa7) and goto_w (0xc8). The goto_w instruction is used for larger jumps. All versions of the Java language have supported labeled statements; however, only the break and continue statements were able to specify a particular label as a target with the onerous restriction that the label must be lexically enclosing. The grammar addition for the goto statement is: GotoStatement: goto Identifier ; The new goto statement similar to break except that the target label can be anywhere inside the method and the identifier is mandatory. The compiler simply translates the goto statement into one of the JVM goto instructions targeting the right offset in the method. Therefore, adding the goto statement to the platform is only a small effort since existing compiler and JVM functionality is reused. Other language changes to support goto include obvious updates to definite assignment analysis, reachability analysis, and exception analysis. Possible future extensions include a computed goto as found in gcc, which would replace the identifier in the goto statement with an expression having the type of a label. Testing Since goto will be implemented using largely existing facilities, only light levels of testing are needed. Impact Compatibility: Since goto is already a keyword, there are no source compatibility implications. Performance/scalability: Performance will improve with more compact code. JVMs already need to handle irreducible flow graphs since goto is a VM instruction.

  Read the article

• A Gentle Introduction to NuGet

  - by Joe Mayo

  Not too long ago, Microsoft released, NuGet, an automated package manager for Visual Studio.  NuGet makes it easy to download and install assemblies, and their references, into a Visual Studio project.  These assemblies, which I loosely refer to as packages, are often open source, and include projects such as LINQ to Twitter. In this post, I'll explain how to get started in using NuGet with your projects to include: installng NuGet, installing/uninstalling LINQ to Twitter via console command, and installing/uninstalling LINQ to Twitter via graphical reference menu. Installing NuGet The first step you'll need to take is to install NuGet.  Visit the NuGet site, at http://nuget.org/, click on the Install NuGet button, and download the NuGet.Tools.vsix installation file, shown below. Each browser is different (i.e. FireFox, Chrome, IE, etc), so you might see options to run right away, save to a location, or access to the file through the browser's download manager.  Regardless of how you receive the NuGet installer, execute the downloaded NuGet.Tools.vsix to install Nuget into visual Studio. The NuGet Footprint When you open visual Studio, observe that there is a new menu option on the Tools menu, titled Library Package Manager; This is where you use NuGet.  There are two menu options, from the Library Package Manager Menu that you can use: Package Manager Console and Package Manager Settings.  I won't discuss Package Manager Settings in this post, except to give you a general idea that, as one of a set of capabilities, it manages the path to the NuGet server, which is already set for you. Another menu, added by the NuGet installer, is Add Library Package Reference, found by opening the context menu for either a Solution Explorer project or a project's References folder or via the Project menu.  I'll discuss how to use this later in the post. The following discussion is concerned with the other menu option, Package Manager Console, which allows you to manage NuGet packages. Gettng a NuGet Package Selecting Tools -> Library Package Manager -> Package Manager Console opens the Package Manager Console.  As you can see, below, the Package Manager Console is text-based and you'll need to type in commands to work with packages. In this post, I'll explain how to use the Package Manager Console to install LINQ to Twitter, but there are many more commands, explained in the NuGet Package Manager Console Commands documentation.  To install LINQ to Twitter, open your current project where you want LINQ to Twitter installed, and type the following at the PM> prompt: Install-Package linqtotwitter If all works well, you'll receive a confirmation message, similar to the following, after a brief pause: Successfully installed 'linqtotwitter 2.0.20'. Successfully added 'linqtotwitter 2.0.20' to NuGetInstall. Also, observe that a reference to the LinqToTwitter.dll assembly was added to your current project. Uninstalling a NuGet Package I won't be so bold as to assume that you would only want to use LINQ to Twitter because there are other Twitter libraries available; I recommend Twitterizer if you don't care for LINQ to Twitter.  So, you might want to use the following command at the PM> prompt to remove LINQ to Twitter from your project: Uninstall-Package linqtotwitter After a brief pause, you'll see a confirmation message similar to the following: Successfully removed 'linqtotwitter 2.0.20' from NuGetInstall. Also, observe that the LinqToTwitter.dll assembly no longer appears in your project references list. Sometimes using the Package Manager Console is required for more sophisticated scenarios.  However, LINQ to Twitter doesn't have any dependencies and is a very simple install, so you can use another method of installing graphically, which I'll show you next. Graphical Installations As explained earlier, clicking Add Library Package Reference, from the context menu for either a Solution Explorer project or a project's References folder or via the Project menu opens the Add Library Package Reference window. This window will allow you to add a reference a NuGet package in your project. To the left of the window are a few accordian folders to help you find packages that are either on-line or already installed.  Just like the previous section, I'll assume you are installing LINQ to Twitter for the first time, so you would select the Online folder and click All.  After waiting for package descriptions to download, you'll notice that there are too many to scroll through in a short period of time, over 900 as I write this.  Therefore, use the search box located at the top right corner of the window and type LINQ to Twitter as I've done in the previous figure. You'll see LINQ to Twitter appear in the list. Click the Install button on the LINQ to Twitter entry. If the installation was successful, you'll see a message box display and disappear quickly (or maybe not if your machine is very fast or you blink at that moment). Then you'll see a reference to the LinqToTwitter.dll assembly in your project's references list. Note: While running this demo, I ran into an issue where VS had created a file lock on an installation folder without releasing it, causing an error with "packagename already exists. Skipping..." and then an error describing that it couldn't write to a destination folder.  I resolved the problem by closing and reopening VS. If you open the Add a Library Package Reference window again, you'll see LINQ to Twitter listed in the Recent packages folder. Summary You can install NuGet via the on-line home page with a click of a button.  Nuget provides two ways to work with packages, via console or graphical window.  While the graphical window is easiest, the console window is more powerful. You can now quickly add project references to many available packages via the NuGet service. Joe

  Read the article

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Limitations of User-Defined Customer Events (FA Type Profile)

  - by Rajesh Sharma

  CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what are limitations in having user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events, you should be aware that you don't extend or simulate base customer events, the ones that are included in the base product, as they are further used to provide/validate additional business functions.  

  Read the article

• Cardinality Estimation Bug with Lookups in SQL Server 2008 onward

  - by Paul White

  Cost-based optimization stands or falls on the quality of cardinality estimates (expected row counts).  If the optimizer has incorrect information to start with, it is quite unlikely to produce good quality execution plans except by chance.  There are many ways we can provide good starting information to the optimizer, and even more ways for cardinality estimation to go wrong.  Good database people know this, and work hard to write optimizer-friendly queries with a schema and metadata (e.g. statistics) that reduce the chances of poor cardinality estimation producing a sub-optimal plan.  Today, I am going to look at a case where poor cardinality estimation is Microsoft’s fault, and not yours. SQL Server 2005 SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; The query plan on SQL Server 2005 is as follows (if you are using a more recent version of AdventureWorks, you will need to change the year on the date range from 2003 to 2007): There is an Index Seek on ProductID = 1, followed by a Key Lookup to find the Transaction Date for each row, and finally a Filter to restrict the results to only those rows where Transaction Date falls in the range specified.  The cardinality estimate of 45 rows at the Index Seek is exactly correct.  The table is not very large, there are up-to-date statistics associated with the index, so this is as expected. The estimate for the Key Lookup is also exactly right.  Each lookup into the Clustered Index to find the Transaction Date is guaranteed to return exactly one row.  The plan shows that the Key Lookup is expected to be executed 45 times.  The estimate for the Inner Join output is also correct – 45 rows from the seek joining to one row each time, gives 45 rows as output. The Filter estimate is also very good: the optimizer estimates 16.9951 rows will match the specified range of transaction dates.  Eleven rows are produced by this query, but that small difference is quite normal and certainly nothing to worry about here.  All good so far. SQL Server 2008 onward The same query executed against an identical copy of AdventureWorks on SQL Server 2008 produces a different execution plan: The optimizer has pushed the Filter conditions seen in the 2005 plan down to the Key Lookup.  This is a good optimization – it makes sense to filter rows out as early as possible.  Unfortunately, it has made a bit of a mess of the cardinality estimates. The post-Filter estimate of 16.9951 rows seen in the 2005 plan has moved with the predicate on Transaction Date.  Instead of estimating one row, the plan now suggests that 16.9951 rows will be produced by each clustered index lookup – clearly not right!  This misinformation also confuses SQL Sentry Plan Explorer: Plan Explorer shows 765 rows expected from the Key Lookup (it multiplies a rounded estimate of 17 rows by 45 expected executions to give 765 rows total). Workarounds One workaround is to provide a covering non-clustered index (avoiding the lookup avoids the problem of course): CREATE INDEX nc1 ON Production.TransactionHistory (ProductID) INCLUDE (TransactionDate); With the Transaction Date filter applied as a residual predicate in the same operator as the seek, the estimate is again as expected: We could also force the use of the ultimate covering index (the clustered one): SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WITH (INDEX(1)) WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; Summary Providing a covering non-clustered index for all possible queries is not always practical, and scanning the clustered index will rarely be optimal.  Nevertheless, these are the best workarounds we have today. In the meantime, watch out for poor cardinality estimates when a predicate is applied as part of a lookup. The worst thing is that the estimate after the lookup join in the 2008+ plans is wrong.  It’s not hopelessly wrong in this particular case (45 versus 16.9951 is not the end of the world) but it easily can be much worse, and there’s not much you can do about it.  Any decisions made by the optimizer after such a lookup could be based on very wrong information – which can only be bad news. If you think this situation should be improved, please vote for this Connect item. © 2012 Paul White – All Rights Reserved twitter: @SQL_Kiwi email: [email protected]

  Read the article

• IRM Item Codes &ndash; what are they for?

  - by martin.abrahams

  A number of colleagues have been asking about IRM item codes recently – what are they for, when are they useful, how can you control them to meet some customer requirements? This is quite a big topic, but this article provides a few answers. An item code is part of the metadata of every sealed document – unless you define a custom metadata model. The item code is defined when a file is sealed, and usually defaults to a timestamp/filename combination. This time/name combo tends to make item codes unique for each new document, but actually item codes are not necessarily unique, as will become clear shortly. In most scenarios, item codes are not relevant to the evaluation of a user’s rights - the context name is the critical piece of metadata, as a user typically has a role that grants access to an entire classification of information regardless of item code. This is key to the simplicity and manageability of the Oracle IRM solution. Item codes are occasionally exposed to users in the UI, but most users probably never notice and never care. Nevertheless, here is one example of where you can see an item code – when you hover the mouse pointer over a sealed file. As you see, the item code for this freshly created file combines a timestamp with the file name. But what are item codes for? The first benefit of item codes is that they enable you to manage exceptions to the policy defined for a context. Thus, I might have access to all oracle – internal files - except for 2011_03_11 13:33:29 Board Minutes.sdocx. This simple mechanism enables Oracle IRM to provide file-by-file control where appropriate, whilst offering the scalability and manageability of classification-based control for the majority of users and content. You really don’t want to be managing each file individually, but never say never. Item codes can also be used for the opposite effect – to include a file in a user’s rights when their role would ordinarily deny access. So, you can assign a role that allows access only to specified item codes. For example, my role might say that I have access to precisely one file – the one shown above. So how are item codes set? In the vast majority of scenarios, item codes are set automatically as part of the sealing process. The sealing API uses the timestamp and filename as shown, and the user need not even realise that this has happened. This automatically creates item codes that are for all practical purposes unique - and that are also intelligible to users who might want to refer to them when viewing or assigning rights in the management UI. It is also possible for suitably authorised users and applications to set the item code manually or programmatically if required. Setting the item code manually using the IRM Desktop The manual process is a simple extension of the sealing task. An authorised user can select the Advanced… sealing option, and will see a dialog that offers the option to specify the item code. To see this option, the user’s role needs the Set Item Code right – you don’t want most users to give any thought at all to item codes, so by default the option is hidden. Setting the item code programmatically A more common scenario is that an application controls the item code programmatically. For example, a document management system that seals documents as part of a workflow might set the item code to match the document’s unique identifier in its repository. This offers the option to tie IRM rights evaluation directly to the security model defined in the document management system. Again, the sealing application needs to be authorised to Set Item Code. The Payslip Scenario To give a concrete example of how item codes might be used in a real world scenario, consider a Human Resources workflow such as a payslips. The goal might be to allow the HR team to have access to all payslips, but each employee to have access only to their own payslips. To enable this, you might have an IRM classification called Payslips. The HR team have a role in the normal way that allows access to all payslips. However, each employee would have an Item Reader role that only allows them to access files that have a particular item code – and that item code might match the employee’s payroll number. So, employee number 123123123 would have access to items with that code. This shows why item codes are not necessarily unique – you can deliberately set the same code on many files for ease of administration. The employees might have the right to unseal or print their payslip, so the solution acts as a secure delivery mechanism that allows payslips to be distributed via corporate email without any fear that they might be accessed by IT administrators, or forwarded accidentally to anyone other than the intended recipient. All that remains is to ensure that as each user’s payslip is sealed, it is assigned the correct item code – something that is easily managed by a simple IRM sealing application. Each month, an employee’s payslip is sealed with the same item code, so you do not need to keep amending the list of items that the user has access to – they have access to all documents that carry their employee code.

  Read the article

• Walmart and Fusion Apps

  - by ultan o'broin

  Photograph: Misha Vaughan I attended Fusion Apps (yes, I know I am supposed to say "Oracle Fusion Applications", but stuffy old style guides are a turn-off in interwebs conversations) User Experience Advocate (FXA) training in Long Beach, California last week; a suitable location as ODTUG KSCOPE 11 was kicking off and key players were in the area. As a member of Oracle's Apps-UX team I know the Fusion Apps messaging, natch, and done some other Fusion Apps go-to-market content work too. For the messaging details themselves, see Lonneke Dikmans (@lonnekedikmans) great blog, by the way. However, I wanted some 'formal' training combined with the opportunity to meet and learn from people already out there delivering those messages. The idea in me reaching out to Misha Vaughan, Apps-UX FXA maven, to get me onto this training was that in addition to my UX knowledge, I could leverage my location in EMEA and hit up customer events more quickly and easily. Those local user groups do like to hear the voice of locals too you know (so I need to work on that mid-Atlantic accent). I'm looking forward to such opportunities. The training was all smashing stuff, just the right level of detail, delivered professionally and with great style and humor. I was especially honored to be paired off for my er, coaching with Debra Lilley (@debralilley), who shared with everyone all kinds of tips and insights from her experiences of delivering the message and demo. For me, that was the real power of the FXA event--the communal, conversational aspect--the meeting up with people who had done all this for real, the sharing in their experiences, while learning along with other newbies. Sorry, but that all-important social aspect doesn't work so well with remote meetings. Katie Candland (Apps-UX) gave us a great tour of the Fusion Apps demo and included some useful presentational tips too (any excuse to buy that iPad). It's clear to me that the Fusion Apps messaging and demos really come alive with real-world examples that local application users will recognize, and I picked up some "yes, that's my job made easier" scene-stealers from Debra and Karen Brownfield too, to add to the great ones already provided. This power of examples shouldn't surprise anyone, they've long been a mainstay of applications user assistance, popular with users. We'll offer customers different types of example topics in the Fusion Apps online help too (stay tuned), and we know from research how important those 3S's (stories, scenarios, and simulations) are to users when they consume and apply information. Well, we've got the simulation, now it's time for more stories and scenarios. If you get a chance to participate in an FXA event (whether you are an Oracle employee or otherwise), I'd encourage it. It's committing your time and energy for sure, but I got real bang for the buck from it for my everyday job too. Listening to the room's feedback on the application demo really brought our internal design work to life, and I picked up on some things that I need to follow up on (like how you alphabetically sort stuff in other languages). User experience is after all, about users. What will I be doing next, and what would I like to see happen? Obviously, I need to develop my story-telling links with the people I met in Long Beach and do some practicing with the materials, and then get out there and deliver them at a suitable location. The demo is what it is right now, and that's a super-rich demo that I know everyone will want to see and ask questions about. Then, as mentioned by attendees at the FXA event, follow up on those translated and localized messages for EMEA (and APAC), that deal with different statutory or reporting requirements of the target markets. Given my background I would say that, wouldn't I? However, language is part of the UX, and international revenue is greater than US-only revenue for Oracle, so yes dear, we all need to get over the fact that enterprise apps users don't all speak, or want to speak, American-English. Most importantly perhaps, the continued development of a strong messaging community between Oracle and partners and customers where we can swap and share those FXA messaging stories and scenarios about Fusion Apps in a conversational way. The more the better, a combination of online and face-to-face meetings. I must also mention the great dinner after the event at Parker's Lighthouse, and the fun myself and Andrew Gilmour (Apps-UX) had at our end of the table talking about just about everything except Fusion Apps with Ronald Van Luttikhuizen and Ben Prusinski (who now understands the difference between Cork and Dublin people. I hope). Thanks to all the Apps-UXers who helped bring the FXA training to town, and to Debra and all the others that I am too jetlagged to mention right who were instrumental in making it happen for me. Here's to the next one. And the Walmart angle? That was me doing my Robert Scoble (ScO'bilizer?)-style guerilla smart phone research in Walmart in Long Beach, before the FXA event. It's all about stories for me. You can read more about it on the appslab blog (see the comments).

  Read the article

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

  - by Martin Hinshelwood

  A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff   That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program.  In this case, MPP files can be associated with only one version of winproj.exe.  The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file.  There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version.  The workaround is for the user to launch Project 2010 from the Start menu then open the file.  If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology.  The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a  predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project.  Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time.  I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario.  I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007.  -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010?   Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

  Read the article

• Master Page: Dynamically Adding Rows in ASP Table on Button Click event

  - by Vincent Maverick Durano

  In my previous post here, I wrote an example that demonstrates how are we going to generate table rows dynamically using ASP Table on click of the Button control. Now based on some comments in my previous example and in the forums they wanted to implement it within Masterpage. Unfortunately the code in my previous example doesn't work in Masterpage for the following main reasons: The Table is dynamically added within the Form tag and so the TextBox control will not be generated correcty in the page. The data will not be retained on each and every postbacks because the SetPreviousData() method is looking for the Table element within the Page and not on the MasterPage. The Request.Form key value should be set correctly since all controls within the master page are prefixed with the naming containter ID to prevent duplicate ids on the final rendered HTML. For example the TextBox control with the ID of TextBoxRow will turn to ID to this ctl00$MainBody$TextBoxRow. In order for the previous example to work within Masterpage then we will have to correct those three main reasons above and this post will guide you how to correct it. Suppose we have this content page declaration below:   <asp:Content ID="Content1" ContentPlaceHolderID="MainHead" Runat="Server"> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainBody" Runat="Server"> <asp:PlaceHolder ID="PlaceHolder1" runat="server"> <asp:Button ID="BTNAdd" runat="server" Text="Add New Row" OnClick="BTNAdd_Click" /> </asp:PlaceHolder> </asp:Content> As you notice I've added a PlaceHolder control within the MainBody ContentPlaceHolder. This is because we are going to generate the Table in the PlaceHolder instead of generating it within the Form element. Now since issue #1 is already corrected then let's proceed to the code beind part. Here are the full code blocks below:     using System; using System.Web.UI; using System.Web.UI.WebControls; public partial class DynamicControlDemo : System.Web.UI.Page { private int numOfRows = 1; protected void Page_Load(object sender, EventArgs e) { //Generate the Rows on Initial Load if (!Page.IsPostBack) { GenerateTable(numOfRows); } } protected void BTNAdd_Click(object sender, EventArgs e) { if (ViewState["RowsCount"] != null) { numOfRows = Convert.ToInt32(ViewState["RowsCount"].ToString()); GenerateTable(numOfRows); } } private void SetPreviousData(int rowsCount, int colsCount) { Table table = (Table)this.Page.Master.FindControl("MainBody").FindControl("Table1"); // **** if (table != null) { for (int i = 0; i < rowsCount; i++) { for (int j = 0; j < colsCount; j++) { //Extracting the Dynamic Controls from the Table TextBox tb = (TextBox)table.Rows[i].Cells[j].FindControl("TextBoxRow_" + i + "Col_" + j); //Use Request object for getting the previous data of the dynamic textbox tb.Text = Request.Form["ctl00$MainBody$TextBoxRow_" + i + "Col_" + j];//***** } } } } private void GenerateTable(int rowsCount) { //Creat the Table and Add it to the Page Table table = new Table(); table.ID = "Table1"; PlaceHolder1.Controls.Add(table);//****** //The number of Columns to be generated const int colsCount = 3;//You can changed the value of 3 based on you requirements // Now iterate through the table and add your controls for (int i = 0; i < rowsCount; i++) { TableRow row = new TableRow(); for (int j = 0; j < colsCount; j++) { TableCell cell = new TableCell(); TextBox tb = new TextBox(); // Set a unique ID for each TextBox added tb.ID = "TextBoxRow_" + i + "Col_" + j; // Add the control to the TableCell cell.Controls.Add(tb); // Add the TableCell to the TableRow row.Cells.Add(cell); } // And finally, add the TableRow to the Table table.Rows.Add(row); } //Set Previous Data on PostBacks SetPreviousData(rowsCount, colsCount); //Sore the current Rows Count in ViewState rowsCount++; ViewState["RowsCount"] = rowsCount; } }   As you observed the code is pretty much similar to the previous example except for the highlighted lines above. That's it! I hope someone find this post usefu! Technorati Tags: Dynamic Controls,ASP.NET,C#,Master Page

  Read the article

• Physics System ignores collision in some rare cases

  - by Gajoo

  I've been developing a simple physics engine for my game. since the game physics is very simple I've decided to increase accuracy a little bit. Instead of formal integration methods like fourier or RK4, I'm directly computing the results after delta time "dt". based on the very first laws of physics : dx = 0.5 * a * dt^2 + v0 * dt dv = a * dt where a is acceleration and v0 is object's previous velocity. Also to handle collisions I've used a method which is somehow different from those I've seen so far. I'm detecting all the collision in the given time frame, stepping the world forward to the nearest collision, resolving it and again check for possible collisions. As I said the world consist of very simple objects, so I'm not loosing any performance due to multiple collision checking. First I'm checking if the ball collides with any walls around it (which is working perfectly) and then I'm checking if it collides with the edges of the walls (yellow points in the picture). the algorithm seems to work without any problem except some rare cases, in which the collision with points are ignored. I've tested everything and all the variables seem to be what they should but after leaving the system work for a minute or two the system the ball passes through one of those points. Here is collision portion of my code, hopefully one of you guys can give me a hint where to look for a potential bug! void PhysicalWorld::checkForPointCollision(Vec2 acceleration, PhysicsComponent& ball, Vec2& collisionNormal, float& collisionTime, Vec2 target) { // this function checks if there will be any collision between a circle and a point // ball contains informations about the circle (it's current velocity, position and radius) // collisionNormal is an output variable // collisionTime is also an output varialbe // target is the point I want to check for collisions Vec2 V = ball.mVelocity; Vec2 A = acceleration; Vec2 P = ball.mPosition - target; float wallWidth = mMap->getWallWidth() / (mMap->getWallWidth() + mMap->getHallWidth()) / 2; float r = ball.mRadius / (mMap->getWallWidth() + mMap->getHallWidth()); // r is ball radius scaled to match actual rendered object. if (A.any()) // todo : I need to first correctly solve the collisions in case there is no acceleration return; if (V.any()) // if object is not moving there will be no collisions! { float D = P.x * V.y - P.y * V.x; float Delta = r*r*V.length2() - D*D; if(Delta < eps) return; Delta = sqrt(Delta); float sgnvy = V.y > 0 ? 1: (V.y < 0?-1:0); Vec2 c1(( D*V.y+sgnvy*V.x*Delta) / V.length2(), (-D*V.x+fabs(V.y)*Delta) / V.length2()); Vec2 c2(( D*V.y-sgnvy*V.x*Delta) / V.length2(), (-D*V.x-fabs(V.y)*Delta) / V.length2()); float t1 = (c1.x - P.x) / V.x; float t2 = (c2.x - P.x) / V.x; if(t1 > eps && t1 <= collisionTime) { collisionTime = t1; collisionNormal = c1; } if(t2 > eps && t2 <= collisionTime) { collisionTime = t2; collisionNormal = c2; } } } // this function should step the world forward by dt. it doesn't check for collision of any two balls (components) // it just checks if there is a collision between the current component and 4 points forming a rectangle around it. void PhysicalWorld::step(float dt) { for (unsigned i=0;i<mObjects.size();i++) { PhysicsComponent &current = *mObjects[i]; Vec2 acceleration = current.mForces * current.mInvMass; float rt=dt; // stores how much more the world should advance while(rt > eps) { float collisionTime = rt; Vec2 collisionNormal = Vec2(0,0); float halfWallWidth = mMap->getWallWidth() / (mMap->getWallWidth() + mMap->getHallWidth()) / 2; // we check if there is any collision with any of those 4 points around the ball // if there is a collision both collisionNormal and collisionTime variables will change // after these functions collisionTime will be exactly the value of nearest collision (if any) // and if there was, collisionNormal will report in which direction the ball should return. checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2(floor(current.mPosition.x) + halfWallWidth,floor(current.mPosition.y) + halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2(floor(current.mPosition.x) + halfWallWidth, ceil(current.mPosition.y) - halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2( ceil(current.mPosition.x) - halfWallWidth,floor(current.mPosition.y) + halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2( ceil(current.mPosition.x) - halfWallWidth, ceil(current.mPosition.y) - halfWallWidth)); // either if there is a collision or if there is not we step the forward since we are sure there will be no collision before collisionTime current.mPosition += collisionTime * (collisionTime * acceleration * 0.5 + current.mVelocity); current.mVelocity += collisionTime * acceleration; // if the ball collided with anything collisionNormal should be at least none zero in one of it's axis if (collisionNormal.any()) { collisionNormal *= Dot(collisionNormal, current.mVelocity) / collisionNormal.length2(); current.mVelocity -= 2 * collisionNormal; // simply reverse velocity along collision normal direction } rt -= collisionTime; } // reset all forces for current object so it'll be ready for later game event current.mForces.zero(); } }

  Read the article

• Using Transaction Logging to Recover Post-Archived Essbase data

  - by Keith Rosenthal

  Data recovery is typically performed by restoring data from an archive.  Data added or removed since the last archive took place can also be recovered by enabling transaction logging in Essbase.  Transaction logging works by writing transactions to a log store.  The information in the log store can then be recovered by replaying the log store entries in sequence since the last archive took place.  The following information is recorded within a transaction log entry: Sequence ID Username Start Time End Time Request Type A request type can be one of the following categories: Calculations, including the default calculation as well as both server and client side calculations Data loads, including data imports as well as data loaded using a load rule Data clears as well as outline resets Locking and sending data from SmartView and the Spreadsheet Add-In.  Changes from Planning web forms are also tracked since a lock and send operation occurs during this process. You can use the Display Transactions command in the EAS console or the query database MAXL command to view the transaction log entries. Enabling Transaction Logging Transaction logging can be enabled at the Essbase server, application or database level by adding the TRANSACTIONLOGLOCATION essbase.cfg setting.  The following is the TRANSACTIONLOGLOCATION syntax: TRANSACTIONLOGLOCATION [appname [dbname]] LOGLOCATION NATIVE ENABLE | DISABLE Note that you can have multiple TRANSACTIONLOGLOCATION entries in the essbase.cfg file.  For example: TRANSACTIONLOGLOCATION Hyperion/trlog NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Hyperion/trlog NATIVE DISABLE The first statement will enable transaction logging for all Essbase applications, and the second statement will disable transaction logging for the Sample application.  As a result, transaction logging will be enabled for all applications except the Sample application. A location on a physical disk other than the disk where ARBORPATH or the disk files reside is recommended to optimize overall Essbase performance. Configuring Transaction Log Replay Although transaction log entries are stored based on the LOGLOCATION parameter of the TRANSACTIONLOGLOCATION essbase.cfg setting, copies of data load and rules files are stored in the ARBORPATH/app/appname/dbname/Replay directory to optimize the performance of replaying logged transactions.  The default is to archive client data loads, but this configuration setting can be used to archive server data loads (including SQL server data loads) or both client and server data loads. To change the type of data to be archived, add the TRANSACTIONLOGDATALOADARCHIVE configuration setting to the essbase.cfg file.  Note that you can have multiple TRANSACTIONLOGDATALOADARCHIVE entries in the essbase.cfg file to adjust settings for individual applications and databases. Replaying the Transaction Log and Transaction Log Security Considerations To replay the transactions, use either the Replay Transactions command in the EAS console or the alter database MAXL command using the replay transactions grammar.  Transactions can be replayed either after a specified log time or using a range of transaction sequence IDs. The default when replaying transactions is to use the security settings of the user who originally performed the transaction.  However, if that user no longer exists or that user's username was changed, the replay operation will fail. Instead of using the default security setting, add the REPLAYSECURITYOPTION essbase.cfg setting to use the security settings of the administrator who performs the replay operation.  REPLAYSECURITYOPTION 2 will explicitly use the security settings of the administrator performing the replay operation.  REPLAYSECURITYOPTION 3 will use the administrator security settings if the original user’s security settings cannot be used. Removing Transaction Logs and Archived Replay Data Load and Rules Files Transaction logs and archived replay data load and rules files are not automatically removed and are only removed manually.  Since these files can consume a considerable amount of space, the files should be removed on a periodic basis. The transaction logs should be removed one database at a time instead of all databases simultaneously.  The data load and rules files associated with the replayed transactions should be removed in chronological order from earliest to latest.  In addition, do not remove any data load and rules files with a timestamp later than the timestamp of the most recent archive file. Partitioned Database Considerations For partitioned databases, partition commands such as synchronization commands cannot be replayed.  When recovering data, the partition changes must be replayed manually and logged transactions must be replayed in the correct chronological order. If the partitioned database includes any @XREF commands in the calc script, the logged transactions must be selectively replayed in the correct chronological order between the source and target databases. References For additional information, please see the Oracle EPM System Backup and Recovery Guide.  For EPM 11.1.2.2, the link is http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_1112200.pdf

  Read the article

• Quicktips 1: Windows 7 Libraries; New website

  - by Michael B. McLaughlin

  I’m working on several large posts right now. So in the interim, I’ve decided to do shorter posts that contain something I find very helpful. This is the first. I’ve been using Windows 7 since April 2010. It’s the first OS I’ve ever worked with that I actually enjoy. I’ve used many over the years (KERNAL; PC DOS; MS-DOS 3.x+; Windows 3.0, 3.11, 95, 98, 98 SE, Me, NT 3.51, NT 4, 2000, XP, Vista, 7; various GNU/Linux distros starting with Debian 1.2 – most recently Ubuntu 10.04; ProDOS, Mac OS 9.X, Mac OS X (through 10.4); SunOS, Solaris; AIX, z/OS; OpenVMS). Some were frustrating. Some tolerable. Some were “nice except for…”. OS X actually started out as seemingly “nice” until every single release contained a breaking change to some major API and they then decided to flip-off everyone who had bought a Mac as little as two years earlier with the release of Snow Leopard without PPC support. Windows 7 is the first one that’s just “nice” without any qualifiers. There are so many little features that add up to make it nice. Today’s Quicktip is one of them. Quicktip 1: Create a Library for your Code One thing I particularly like about Windows 7 is the Libraries feature in Explorer. Specifically the fact that you can create custom ones. I used to spend a lot of time opening new Explorer windows and navigating my various Visual Studio projects folders. Custom libraries allowed me to simplify that whole process. I now simply go to my “Code” library and there it all is. Adding a new library is easy. Open an Explorer window. If you aren’t in your Libraries when it opens, navigate to Libraries. Click the “New library” button. Give it a name. Then right click on the new library you created and go to “Properties”. Click the “Include a folder…” button. Choose the folder you want and press “Include folder”. Voilà! If you wish to add more, simply click “Include a folder…” again and repeat. It’s true that this is just a small time saver. But it’s one of those things that just adds a really nice touch. ------------------------ In a separate note, just before Christmas I finally finished and published my new website: http://www.bobtacoindustries.com/ . I waited to post here about it until I found time to incorporate a few things I hadn’t had the time to do when I pushed it out for its “soft open”. Most of them are now done and so my site is now formally open. I have no plans or intentions of moving my blog ( http://blog.bobtacoindustries.com/ points here). I quite like it here, both in terms of the interface and also in terms of the concept (and realization thereof) of pooling geek bloggers to create a pool of knowledge and helpful tips, tricks, techniques, and advice. I created it simply because I felt that it was time to have a website as I venture further into my return to the land of software development. The “For Devs” section should hopefully be useful to developers, particularly the links section. It’s my curated list of sites that I regularly visit to solve problems, to help answer questions on Twitter and the AppHub forums, and to learn new things. I’ll be adding links to it periodically and will be including topic areas as I become acquainted with them enough to form a proper list. WPF will likely be the first topic area added. If there are any links you think I should add to the existing topics, let me know! I warn in advance that I’m less inclined to add blogs; there are simply too many good blogs and I do not want to have hundreds per topic area. So blogs are limited primarily, though not exclusively, to acknowledged experts in the subject area who generally blog regularly about it and who usually are part of the team that develops the product or technology in question. I’m much more amenable to including individual blogs posts in the techniques subcategory in the appropriate topic area. Ultimately, it’s a collection of things I find interesting and helpful. So please no hard feelings if I don’t add a link you think is awesome. I may well think it’s awesome too, but conclude that it doesn’t fit with my goals for the dev links area.

  Read the article

• SOA 11g Technology Adapters – ECID Propagation

  - by Greg Mally

  Overview Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few. Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective. One of these challenges is how to correlate a logical business transaction across SOA component instances. This correlation is typically accomplished via the execution context ID (ECID), but we lose the ECID correlation when the business transaction spans technologies like FTP, database, and files. A new feature has been introduced in the Oracle adapter JCA framework to allow the propagation of the ECID. This feature is available in the forthcoming SOA Suite 11.1.1.7 (PS6). The basic concept of propagating the ECID is to identify somewhere in the payload of the message where the ECID can be stored. Then two Binding Properties, relating to the location of the ECID in the message, are added to either the Exposed Service (left-hand side of composite) or External Reference (right-hand side of composite). This will give the JCA framework enough information to either extract the ECID from or add the ECID to the message. In the scenario of extracting the ECID from the message, the ECID will be used for the new component instance. Where to Put the ECID When trying to determine where to store the ECID in the message, you basically have two options: Add a new optional element to your message schema. Leverage an existing element that is not used in your schema. The best scenario is that you are able to add the optional element to your message since trying to find an unused element will prove difficult in most situations. The schema will be holding the ECID value which looks something like the following: 11d1def534ea1be0:7ae4cac3:13b4455735c:-8000-00000000000002dc Configuring Composite Services/References Now that you have identified where you want the ECID to be stored in the message, the JCA framework needs to have this information as well. The two pieces of information that the framework needs relates to the message schema: The namespace for the element in the message. The XPath to the element in the message. To better understand this, let's look at an example for the following database table: When an Exposed Service is created via the Database Adapter Wizard in the composite, the following schema is created: For this example, the two Binding Properties we add to the ReadRow service in the composite are: <!-- Properties for the binding to propagate the ECID from the database table --> <property name="jca.ecid.nslist" type="xs:string" many="false">  xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadRow"</property> <property name="jca.ecid.xpath" type="xs:string" many="false">  /ns1:EcidPropagationCollection/ns1:EcidPropagation/ns1:ecid</property> Notice that the property called jca.ecid.nslist contains the targetNamespace defined in the schema and the property called jca.ecid.xpath contains the XPath statement to the element. The XPath statement also contains the appropriate namespace prefix (ns1) which is defined in the jca.ecid.nslist property. When the Database Adapter service reads a row from the database, it will retrieve the ECID value from the payload and remove the element from the payload. When the component instance is created, it will be associated with the retrieved ECID and the payload contains everything except the ECID element/value. The only time the ECID is visible is when it is stored safely in the resource technology like the database, a file, or a queue. Simple Database/File/JMS Example This section contains a simplified example of how the ECID can propagate through a database table, a file, and JMS queue. The composite for the example looks like the following: The flow of this example is as follows: Invoke database insert using the insertwithecidbpelprocess_client_ep Service. The InsertWithECIDBPELProcess adds a row to the database via the Database Adapter. The JCA Framework adds the ECID to the message prior to inserting. The ReadRow Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadRowBPELProcess is created and it is associated with the retried ECID. The ReadRowBPELProcess now writes the record to the file system via the File Adapter. The JCA Framework adds the ECID to the message prior to writing the message to file. The ReadFile Service retrieves the record from the file system and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadFileBPELProcess is created and it is associated with the retried ECID. The ReadFileBPELProcess now enqueues the message via the JMS Adapter. The JCA Framework adds the ECID to the message prior to enqueuing the message. The DequeueMessage Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of DequeueMessageBPELProcess is created and it is associated with the retried ECID. The logical flow ends. When viewing the Flow Trace in the Enterprise Manger, you will now see all the instances correlated via ECID: Please check back here when SOA Suite 11.1.1.7 is released for this example. With the example you can run it yourself and reinforce what has been shared in this blog via a hands-on experience. One final note: the contents of this blog may be included in the official SOA Suite 11.1.1.7 documentation, but you will still need to come here to get the example.

  Read the article

• Memento with optional state?

  - by Korey Hinton

  EDIT: As pointed out by Steve Evers and pdr, I am not correctly implementing the Memento pattern, my design is actually State pattern. Menu Program I built a console-based menu program with multiple levels that selects a particular test to run. Each level more precisely describes the operation. At any level you can type back to go back one level (memento). Level 1: Server Type? [1] Server A [2] Server B Level 2: Server environment? [1] test [2] production Level 3: Test type? [1] load [2] unit Level 4: Data Collection? [1] Legal docs [2] Corporate docs Level 4.5 (optional): Load Test Type [2] Multi TIF [2] Single PDF Level 5: Command Type? [1] Move [2] Copy [3] Remove [4] Custom Level 6: Enter a keyword [setup, cleanup, run] Design States PROBLEM: Right now the STATES enum is the determining factor as to what state is BACK and what state is NEXT yet it knows nothing about what the current memento state is. Has anyone experienced a similar issue and found an effective way to handle mementos with optional state? static enum STATES { SERVER, ENVIRONMENT, TEST_TYPE, COLLECTION, COMMAND_TYPE, KEYWORD, FINISHED } Possible Solution (Not-flexible) In reference to my code below, every case statement in the Menu class could check the state of currentMemo and then set the STATE (enum) accordingly to pass to the Builder. However, this doesn't seem flexible very flexible to change and I'm struggling to see an effective way refactor the design. class Menu extends StateConscious { private State state; private Scanner reader; private ServerUtils utility; Menu() { state = new State(); reader = new Scanner(System.in); utility = new ServerUtils(); } // Recurring menu logic public void startPromptingLoop() { List<State> states = new ArrayList<>(); states.add(new State()); boolean redoInput = false; boolean userIsDone = false; while (true) { // get Memento from last loop Memento currentMemento = states.get(states.size() - 1) .saveMemento(); if (currentMemento == null) currentMemento = new Memento.Builder(0).build(); if (!redoInput) System.out.println(currentMemento.prompt); redoInput = false; // prepare Memento for next loop Memento nextMemento = null; STATES state = STATES.values()[states.size() - 1]; // get user input String selection = reader.nextLine(); switch (selection) { case "exit": reader.close(); return; // only escape case "quit": nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); states.clear(); break; case "back": nextMemento = new Memento.Builder(previous(state), currentMemento, selection).build(); if (states.size() <= 1) { states.remove(0); } else { states.remove(states.size() - 1); states.remove(states.size() - 1); } break; case "1": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "2": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "3": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "4": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; default: if (state.equals(STATES.CATEGORY)) { String command = selection; System.out.println("Executing " + command + " command on: " + currentMemento.type + " " + currentMemento.environment); utility.executeCommand(currentMemento.nickname, command); userIsDone = true; states.clear(); nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); } else if (state.equals(STATES.KEYWORD)) { nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); states.clear(); nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); } else { redoInput = true; System.out.println("give it another try"); continue; } break; } if (userIsDone) { // start the recurring menu over from the beginning for (int i = 0; i < states.size(); i++) { if (i != 0) { states.remove(i); // remove all except first } } reader = new Scanner(System.in); this.state = new State(); userIsDone = false; } if (!redoInput) { this.state.restoreMemento(nextMemento); states.add(this.state); } } } }

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >