Search Results

Search found 20946 results on 838 pages for 'at command'.

Page 277/838 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• Why is apt-cache so slow?

  - by Damn Terminal

  After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

  Read the article

• Enable/disable wireless interface in a bat file

  - by Herms

  Is there a way to enable/disable a wireless network interface via the command line (so I can put it in a bat file)? When I'm in the office I use a wired connection, but Windows still occasionally bugs me about my wireless connection not being connected (even though I turned off the option for notifying me when there's no connectivity). I'm guessing the only way to stop it from bugging me is to disable the interface, but I'd rather not have to go into the network settings every time I need to do so. I'd like to set up a bat file or a shortcut that I can use to enable/disable the wireless (preferably a single one that toggles the current state), and then just set up a keyboard shortcut for that. I just have no idea how to do so from the command line.

  Read the article

• How to convert non key, value java arguments to applet params? (args like -Xmx64m)

  - by bwizzy

  I'm trying to use xvpviewer (based on TightVNC) to VNC into my VMs running on Citirx XenServer. There are a couple of caveats required with trusting the certificate from XenServer which I've got working. Essentially I'm trying to convert the java command below (which works on the command line to launch VncViewer) for use in an applet that can be accessed via HTML page. java -Djavax.net.ssl.trustStore=/tmp/kimo.jks -Xmx64m -jar VncViewer.jar HOST "/console?ref=OpaqueRef:141f4204-2240-4627-69c6-a0c7d9898e6a&session_id=OpaqueRef:91a483c4-bc40-3bb0-121c-93f2f89acc3c" PORT 443 PROXYHOST1 192.168.0.5 PROXYPORT1 443 SocketFactory "HTTPSConnectSocketFactory" I know I can put the HOST, PORT etc arguments into param tags for the applet but I'm not sure how to apply the two initial argments.

  Read the article

• -ssadd is invalid when setting up Sessions on SQL Server 2005

  - by P.Brian.Mackey

  I have a dev and QA environment with SQL 2005 EE on dev and SQL 2000 on QA. On QA I run aspnet_regsql –ssadd –sstype t -E in command line and it works fine. I run the same command on dev and it returns "'-ssadd' is invalid". The working directory for both is C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727. I found some info on MSDN that said that SQL Express Edit. required a script to run before -ssadd will work, but this script didn't help me. I'm not sure where to go from here.

  Read the article

• FTP Active vs passive mode

  - by Dan

  I have a FTP server and while doing testing I found an odd issue that I don't understand. I send a RETR command on file "/Folder1/file.txt" and it works fine. Then I send a RETR command on file "/Folder1/SubFolder1/file.txt" and it times out on transfering the data to the client. This was in active mode. When I switch to passive mode it works fine. I understand the difference between the two modes, but what I don't understand is why it worked for one file in active mode, but not the other. I tried it a dozen times and still got the same results. Any ideas? Thanks!

  Read the article

• How do I fix broken installation?

  - by Daniel

  Let me start off by saying I'm dual booting 11.04 and Windows 7 on a Thinkpad T61p. The problem may have arisen when I hit the power button during normal startup. I'm fully aware how stupid this is. I don't know why I did it. I did it. Now, I can't get in to Ubuntu. Windows works fine. But when I try to start Ubuntu normally, it seems to run some checks, and does not start up. Sometimes, I see a black screen, and it tells me that it's running certain checks, and then, [ok]. Like... Battery Check Somethingorother [ok] It'll give me 1-5 of these. And then it just does nothing, and I have to turn it off. When I try to start in safe mode... I tried low graphics mode, and after going through a couple of dialogue boxes, I'm brought right back to the safe mode dialogue box. And if I hit 'resume,' a shell pushes up (still that grey on black "your computer is broken" type shell) and asks me to log in. I do, and try to run unity. It tells me something along the lines of: WARNING no DISPLAY variable set and then sets it to " :0" , which doesn't work. And then I can't do anything, really, and I have to restart. (I don't know how to do this from the command line, so I just hard reset. That command would be helpful). Does anybody have any idea how I can get Ubuntu working right again? FTP is less pleasant in Explorer than it is in Nautilus or w/e it is now.

  Read the article

• How can I automatically convert all source code files in a folder (recursively) to a single PDF with syntax highlighting?

  - by Bentley4

  I would like to convert source code of a few projects to one printable file to save on a usb and print out easily later. How can I do that? Edit First off I want to clarify that I only want to print the non-hidden files and directories(so no contents of .git e.g.). To get a list of all non-hidden files in non-hidden directories in the current directory you can run the find . -type f ! -regex ".*/\..*" ! -name ".*" command as seen as the answer in this thread. As suggested in that same thread I tried making a pdf file of the files by using the command find . -type f ! -regex ".*/\..*" ! -name ".*" ! -empty -print0 | xargs -0 a2ps -1 --delegate no -P pdf but unfortunately the resulting pdf file is a complete mess.

  Read the article

• postfix: force server to send mail outside of localhost

  - by LoneWolfPR

  I have a php file that sends mail using the mail() function. The problem is one of the forms sends to a domain that is registerred on my server while having the mail handled on a different server. Postfix looks locally only. When it doesn't find the email address is rejects the message. How can I configure postfix to send mail to all domains through the internet and not locally? Update Ok. So it wasn't a postfix issue at all. I simply needed to turn off mail to that domain from the command line. For anyone that needs that command it is (at least on my system): /usr/local/psa/bin/domain --update example.com -mail_service false

  Read the article

• Background process and SIGHUP

  - by Charles Salvia

  My understanding is that a program that is associated with a terminal will receive the SIGHUP signal if that terminal is closed. This usually will terminate the program. I also know that you can use the nohup command along with the & symbol to run the program in the background, and disassociate it from the terminal so that the program is not terminated when the terminal closes (on log out.) However, suppose a program is run normally without nohup, but is then suspended using Cntl-Z. If the program is then resumed in the background using the bg command, will it receive the SIGHUP signal on log out? Or to put it another way: if I have a program which is already running, and I don't want to stop it but I'd like to log out, can I suspend it using Cntl-Z and run it in the background using bg? Or will the program be terminated when I log out?

  Read the article

• How To Export/Import a Website in IIS 7.x

  - by Tray Harrison

  IIS 6 had a great feature called ‘Save Configuration to a File’ which would allow you to easily export a website’s configuration, to be later used to import either on the same server or another box.  This came in handy anytime you wanted to duplicate a site in order to do some testing without impacting the existing application.  So naturally, Microsoft decided to do away with this feature in IIS 7. The process to export/import a site is still fairly simple, though not as obvious as it was in previous versions.  Here are the steps: 1. Open a command prompt and navigate to C:\Windows\System32\inetsrv and run the following command: appcmd list site /name:<sitename> /config /xml > C:\output.xml So if you were wanting to export a website named EAC, you would run the following: If you’ll be setting up another copy of the site on the same server, you’ll now need to edit the output.xml file before importing it.  This is necessary in order to avoid conflicts such as bindings, Site ID, etc.  To do this, edit the XML and change the values.  Go ahead and make a copy of the home directory, and rename it to whatever folder name you specified in the output – /EAC2 in this example.  If you decide to change the app pool, make sure you go ahead and create the new app pool as well. Once these edits have been made, we are now ready to import the site.  To do that run: appcmd add sites /in < c:\output.xml So for our example it would look like this: That’s it.  You should now see your site listed when opening up Inet Manager.  If for some reason the site fails to start, that’s probably because you forgot to create the new app pool or there is a problem with one of the other parameters you changed.  Look at the System log to identify any issues like this.

  Read the article

• Count the Number of Characters in a Full FIle Path?

  - by Richie086

  I need to be able to count the number of characters in a full path to a file in windows. How I am currently accomplishing this task is as follows: Open a command prompt cd to the directory in question (for example c:\CruiseControl\ProjectArtifacts\ProjectName) type the following command dir /s /b output.csv Open the resulting output.csv file in excel. use the =LEN() function in excel to count the number of characters per row as listed in the output.csv file. Does anyone know of an explorer shell extension, or some 3rd party tool that could preform this function without me having to manipulate the output from dir in excel? Is there some easier way to go about doing this? The root of the issue I am having is the ~260 character file path limit in Windows. I am trying to analyze which paths are approx ~260 characters so I can shorten them to avoid getting this error.

  Read the article

• Deleting Time Machine in Mac OS X 10.6.4

  - by cappuccino

  Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

  Read the article

• Programtically get the Wireless lan config of a machine and use netsh to setup new profile

  - by Maestro1024

  Programtically get the Wireless lan config of a machine and use netsh to setup new profile I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How Can I get my SSID set and connected for the card.

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• Samba users not added untill they logon first? Edit: How do I add users to tdbsam without a password prompt?

  - by glisignoli

  I add users to my server with the command useradd -m -p PASS_HASH -s /usr/sbin/nologin USERNAME Then I try to access their samba home share, but it never shows up until I login with the user: root:~$sudo login failtest Password:###### Added user failtest. Is there some way of added the user without logging in? Edit: The problem is that the user is added with the useradd command, but ubuntu seems to run an initalisation script when the user logs on for the first time. This script then adds that user to the tdbsam user database. Finding the initalisation script or the method it uses to add a user to the tdbsam database without requiring any user input (as smbpasswd -a USER prompts the user for a password). So all I need is a way to add a user+pass to the tdbsam database without prompting a user for a password (eg: samaba-add-user.sh USERNAME PASSWORD).

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• Change Win7 taskbar position (overriding GPO, Registry Editor, Admin. Rights)

  - by diegocavazos53

  I run the computer center of my Faculty and the problem is that users manage to change the Win7 taskbar position. I don't really know how they do this as far as I have applied many group policies that are specific to the taskbar (like locking it). I have also disallowed users from entering new registry keys or executing the command prompt (or employing scripts). They have regular user rights and many Win7 tweaking programs need administrator rights to make changes to the GUI. So in other words, the taskbar is locked, there is a policy that sets its position to the lower part of the screen, users can't see the control panel, add registry keys, use the command prompt and don't have admin. rights. How do they keep moving the taskbar position to the upper part of the screen? Any ideas would be greatly appreciated. Thank you.

  Read the article

• How can find out the device Id of my unmounted DVD?

  - by fred.bear

  When I put a DVD into the DVD drive, it appears in Nautilus Places, but is not automatically mounted. (this is by personal choice). In this unmounted state, mount (of course) reports nothing, and likewise for df.. but Nautilus is aware of the DVD hardware unit and has read the Label; which it shows in Places So it seems to me that Nautilus has already accessed the DVD devices (Did it temporarily mount it?)... The main point of my question was to determine how to find the device Id of an unmounted device .. but as I've been writing this, I now think it may not be as simple as that... This issue came up because I wanted to test this command cat iso-pieces.* | growisofs -Z /dev/dvd=/dev/stdin, but then realized that I didn't know how to get my DVD's device Id. ... and does the above command requires a mounted device, or does it write directly to the device? ... as you can see, I'm a bit vague about devices :) Come to think of it maybe Nautalus read the DVD device directly, because when all is said and done, something has to read/write directly to it. info growisofs says: Under Linux it will most likely be an ide-scsi device such as "/dev/scd0 How can I find this Id via a script?

  Read the article

• Locked out by changing file permissions

  - by Valeriy

  I just locked my root account (and all other accounts if it matters) completely out of the RHEL 5.4 by changing permissions on every file to 400. Now I have "Permission denied" on any command that I try to run, including chmod itself. Any idea on how to recover? The only access I have to the server is via terminal or SSH. (If anyone cares how it happened, I was running a hardening script and one of the lines was supposed to change permission on some config files in /etc directory. It has couple of variables that had not been set, so the command essentially evaluated to chmod -R 0400 /* Ouch! This is sure a great lesson on checking the scripts even more carefully in the future but what can I do now?

  Read the article

• Trying to grok Linux quotas, where is the data stored?

  - by CarpeNoctem

  So all the tutorials and documentation for the Linux quota system has left me confused. For each filesystem with quotas enabled/on where is the actual quota information stored? Is it filesystem metadata or is it in a file? Say user foo creates a new file on /home. How does the kernel determine whether user foo is below their hard limit? Does the kernel have to tally up quota information on that filesystem each time or is it in the superblock or somewhere else? As far as I understand, the kernel consults the aquota.user file for the actual rules, but where is the current quota usage data stored? Can this be viewed with any tools outside repquota and the like? TIA!! Update: Thanks for the help. I had already read that mini-HOWTO. I am pretty clear on the usage of the user space tools. What I was unclear on is whether the usage data was ALSO in the file that stored per-user limits and you answered this with a yes. From what I can tell, rc.sysinit runs quotacheck and quotaon on startup. The quotacheck program analyzes the filesystem, updates the aquota.* files. It then makes use of quota.h and the quotactl() syscall to inform the kernel of quota info. From this point forward the kernel hashes that information and increments/decrements quota stats as changes occur. Upon shutdown, the init.d/halt script runs the quotaoff command RIGHT before the filesystems are unmounted. The quotaoff command does not appear to update the aquota.* files with the information the kernel has in memory. I say this because the {a,c,m}times for the aquota.user file are only updated upon a reboot of the system or by manual running the quotacheck command. It appears - as far as I can tell - that the kernel just drops it's up-to-date usage data on the floor at shutdown. This information is never used to update the aquota.* files. They are updated during startup by quotacheck(rc.sysinit). Seems silly to me since that updated info had already been collected by the kernel. So...in conclusion I am still not entirely clear on the methods. ;)

  Read the article

• Vim: I don't want to insert!!!

  - by bhh1988

  I could not find anything online addressing this problem, which is surprising. The problem is that I find it very easy to accidentally insert stuff in Vim. I know I can undo by with 'u', but it still is quite annoying and frequent. Often, I enter a command like 'sp file.txt' without realizing that I haven't entered the ':' character yet (so I'm not yet on the command line). Unfortunately, there are several characters that take you to insert mode, including 's', 'a', 'i', 'o'. I'd rather have insert mode mapped to just one keybinding which is very deliberate, like shift-space. Can anyone point me to something that might have what I'm looking for? Thanks.

  Read the article

• Install Git on a Media Temple (dv) 4.0 server

  - by Chris

  I'm trying to install Git on my Media Temple (dv) 4.0 server. I've followed these instructions. It seems to have "installed", as there are a boat-load of files in the /root/git-2012-06-06 directory. However, when I perform any git command in the server, I receive this message: git: command not found My assumption is that something, somewhere is not configured properly, but I have no idea where to start. Could anybody lend a hand / offer some pointers? (And if you hadn't guessed, I'm pretty new to all this, so please be kind!)

  Read the article

• How to use psexec without admin privileges on target machine?

  - by HighCommander4

  Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >