cpu temperature - Page 28

Does a CPU assigns a value atomically to memory?

- by Poni

Hi! A quick question I've been wondering about for some time; Does the CPU assign values atomically, or, is it bit by bit (say for example a 32bit integer). If it's bit by bit, could another thread accessing this exact location get a "part" of the to-be-assigned value? Think of this: I have two threads and one shared "unsigned int" variable (call it "g_uiVal"). Both threads loop. On is printing "g_uiVal" with printf("%u\n", g_uiVal). The second just increase this number. Will the printing thread ever print something that is totally not or part of "g_uiVal"'s value? In code: unsigned int g_uiVal; void thread_writer() { g_uiVal++; } void thread_reader() { while(1) printf("%u\n", g_uiVal); }

Read the article

How can I keep the cpu temp low?

- by Newton

I have an HP pavilion dv7, I'm using ubuntu 12.04 so the overheating problem with sandybridge cpu is a lot better. However my laptop is still becoming too hot to keep on my legs. The problem is that the fan wait too much before starting, so the medium temp is too hight. When I'm using windows 7 the laptop is room-temperature cold, I've absolutely no problem. On windows the fan is always spinning very low & very silently so the heat is continuously removed, without reaching an unconfortable temp. How can I force the computer to act like that also on ubuntu? PS The bios can't let me control this kind of thing, and this is my experience with lm-sensors and fancontrol al@notebook:~$ sudo sensors-detect [sudo] password for al: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Hewlett-Packard HP Pavilion dv7 Notebook PC (laptop) # Board: Hewlett-Packard 1800 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8518 Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: i915 gmbus disabled (i2c-0) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus ssc (i2c-1) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOB (i2c-2) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus vga (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOA (i2c-4) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus panel (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 GPIOC (i2c-6) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-7) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOD (i2c-8) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpb (i2c-9) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOE (i2c-10) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus reserved (i2c-11) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpd (i2c-12) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOF (i2c-13) Do you want to scan it? (YES/no/selectively): y Next adapter: DPDDC-B (i2c-14) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK al@notebook:~$ sudo /etc/init.d/module-init-tools restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop module-init-tools ; start module-init-tools. The restart(8) utility is also available. module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools restart stop: Unknown instance: module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools start module-init-tools stop/waiting al@notebook:~$ sudo pwmconfig # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Is my case too desperate?

Read the article

Skewed: a rotating camera in a simple CPU-based voxel raycaster/raytracer

- by voxelizr

TL;DR -- in my first simple software voxel raycaster, I cannot get camera rotations to work, seemingly correct matrices notwithstanding. The result is skewed: like a flat rendering, correctly rotated, however distorted and without depth. (While axis-aligned ie. unrotated, depth and parallax are as expected.) I'm trying to write a simple voxel raycaster as a learning exercise. This is purely CPU based for now until I figure out how things work exactly -- fow now, OpenGL is just (ab)used to blit the generated bitmap to the screen as often as possible. Now I have gotten to the point where a perspective-projection camera can move through the world and I can render (mostly, minus some artifacts that need investigation) perspective-correct 3-dimensional views of the "world", which is basically empty but contains a voxel cube of the Stanford Bunny. So I have a camera that I can move up and down, strafe left and right and "walk forward/backward" -- all axis-aligned so far, no camera rotations. Herein lies my problem. Screenshot #1: correct depth when the camera is still strictly axis-aligned, ie. un-rotated. Now I have for a few days been trying to get rotation to work. The basic logic and theory behind matrices and 3D rotations, in theory, is very clear to me. Yet I have only ever achieved a "2.5 rendering" when the camera rotates... fish-eyey, bit like in Google Streetview: even though I have a volumetric world representation, it seems --no matter what I try-- like I would first create a rendering from the "front view", then rotate that flat rendering according to camera rotation. Needless to say, I'm by now aware that rotating rays is not particularly necessary and error-prone. Still, in my most recent setup, with the most simplified raycast ray-position-and-direction algorithm possible, my rotation still produces the same fish-eyey flat-render-rotated style looks: Screenshot #2: camera "rotated to the right by 39 degrees" -- note how the blue-shaded left-hand side of the cube from screen #2 is not visible in this rotation, yet by now "it really should"! Now of course I'm aware of this: in a simple axis-aligned-no-rotation-setup like I had in the beginning, the ray simply traverses in small steps the positive z-direction, diverging to the left or right and top or bottom only depending on pixel position and projection matrix. As I "rotate the camera to the right or left" -- ie I rotate it around the Y-axis -- those very steps should be simply transformed by the proper rotation matrix, right? So for forward-traversal the Z-step gets a bit smaller the more the cam rotates, offset by an "increase" in the X-step. Yet for the pixel-position-based horizontal+vertical-divergence, increasing fractions of the x-step need to be "added" to the z-step. Somehow, none of my many matrices that I experimented with, nor my experiments with matrix-less hardcoded verbose sin/cos calculations really get this part right. Here's my basic per-ray pre-traversal algorithm -- syntax in Go, but take it as pseudocode: fx and fy: pixel positions x and y rayPos: vec3 for the ray starting position in world-space (calculated as below) rayDir: vec3 for the xyz-steps to be added to rayPos in each step during ray traversal rayStep: a temporary vec3 camPos: vec3 for the camera position in world space camRad: vec3 for camera rotation in radians pmat: typical perspective projection matrix The algorithm / pseudocode: // 1: rayPos is for now "this pixel, as a vector on the view plane in 3d, at The Origin" rayPos.X, rayPos.Y, rayPos.Z = ((fx / width) - 0.5), ((fy / height) - 0.5), 0 // 2: rotate around Y axis depending on cam rotation. No prob since view plane still at Origin 0,0,0 rayPos.MultMat(num.NewDmat4RotationY(camRad.Y)) // 3: a temp vec3. planeDist is -0.15 or some such -- fov-based dist of view plane from eye and also the non-normalized, "in axis-aligned world" traversal step size "forward into the screen" rayStep.X, rayStep.Y, rayStep.Z = 0, 0, planeDist // 4: rotate this too -- 0,zstep should become some meaningful xzstep,xzstep rayStep.MultMat(num.NewDmat4RotationY(CamRad.Y)) // set up direction vector from still-origin-based-ray-position-off-rotated-view-plane plus rotated-zstep-vector rayDir.X, rayDir.Y, rayDir.Z = -rayPos.X - me.rayStep.X, -rayPos.Y, rayPos.Z + rayStep.Z // perspective projection rayDir.Normalize() rayDir.MultMat(pmat) // before traversal, the ray starting position has to be transformed from origin-relative to campos-relative rayPos.Add(camPos) I'm skipping the traversal and sampling parts -- as per screens #1 through #3, those are "basically mostly correct" (though not pretty) -- when axis-aligned / unrotated.

Read the article

Win 7 running slowly with low CPU usage and memory

- by guywhoneedsahand

I have a relatively new (under 2 yrs old) windows 7 machine. It has 9GB of RAM, and an i7 core CPU (930 @ 2.8GHz w/ 8 CPUs). After about 8 months since a clean install, I noticed my computer was running slowly. I figure it was fragmentation etc, and I did a complete wipe & clean reinstall. However, my problems are somehow persisting. The computer is running painfully slowly (but in leaps and bounds - sometimes it will work fine for 3 hrs, then suddenly freeze up just from clicking the start button). The 'freezes' happen randomly - not during any especially intensive computing. I initially thought something might be eating through my CPU and/or Memory, but Task Manager indicates that neither the CPU or Memory spike. In fact, even during serious lag, CPU usage remains at less than 5% and Memory at ~ 1.5GB. It's beyond me why a fresh install on a powerful machine is performing so poorly... and it certainly is frustrating! What could be causing the poor performance, and what can I do to fix it?

Read the article

High load average, low CPU and IO (Centos 5.7)

- by Ben

A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

Read the article

Virtualbox HTTP load testing, host CPU overload issues

- by aschuler

I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

Read the article

mysqld causes high CPU load

- by Radu

Read the article

OpenVPN Server - CPU is pegged out

- by ericl42

Hello, I am configuring OpenVPN to act as a SSL tunnel for a remote location. I have OpenVPN1 at our current location acting as a server then OpenVPN2 at the other location that is acting as a client but is also acting as a DHCP server to machines behind it so they are basically connected to the local LAN. Everything is set up fine and I can talk from location A to location B with no problems like everyone is local. I am however having some performance issues. OpenVPN1 CPU is pegged to 100% the entire time I am copying or doing any type of activity through the tunnel. I expect some CPU usage going up but nothing like this. It's really killing my performance. OpenVPN1 is running in ESX right now with 2 gig RAM and 4 procs with unlimited bursting capacity. I am using AES-192 encryption with a 1024 key. Any idea how I can get my CPU down on OpenVPN1 and my download/upload speeds higher between the tunnel? Thanks. edit: Turning down the logging helped boost the throughput a little bit, but I am still fairly shy of where I believe I should be. Also I am still maxed out on the CPU. Does anyone have any ideas? I am really stuck on this. Thanks.

Read the article

Extremely high mysqld CPU usage with no active queries

- by RadarNyan

I have a VPS running Ubuntu 12.04 LTS with LEMP stack, followed the guide from Linode Library (since I'm using a Linode) to setup, and everything worked fine until now. I don't know what's wrong, but my CPU usage just goes up since a week ago. Today things getting really bad - I got 74% CPU usage so I went check and found that mysqld taking too much CPU usage (somewhere around 30% ~ 80%) So I did some Google Search, tried disable InnoDB, restart mysql, reset ntp / system clock (Isn't this bug supposed to happen more than a year ago?!) and reboot my VPS, nothing helped. Even with mysql processlist empty, I still get mysqld CPU usage very high. I don't know what I missed and have totally no idea, any advice would be appreciated. Thanks in advance. Update: I got these from running "strace mysqld" write(2, "InnoDB: Unable to lock ./ibdata1"..., 44) = 44 write(2, "InnoDB: Check that you do not al"..., 115) = 115 select(0, NULL, NULL, NULL, {1, 0}^[[A^[[A) = 0 (Timeout) fcntl64(3, F_SETLK64, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}, 0xbfa496f8) = -1 EAGAIN (Resource temporarily unavailable) hum... I did tried to disable InnoDB and it didn't fix this problem. Any idea? Update2: # ps -e | grep mysqld 13099 ? 00:00:20 mysqld then use "strace -p 13099", the following lines appears repeatedly: fcntl64(12, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, NULL}, [2]) = 14 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, [30]) = 0 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0", 8) = 0 fcntl64(14, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0xb786a584, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb786a580, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0xb7869998, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=12, revents=POLLIN}]) er... now I totally don't get it x_x help

Read the article

windows 95 virtualization and CPU idle

- by brtlvrs

We are in the situation that we need to migrate our windows 95 systems (i know, that is so last century ). There is no hardware for a reasonable price available to run our windows 95 systems. So we are extending the overdue lifetime of it, by making them virtual. Now we see that VMware reports 100% CPU utilization of a windows 95 VM. This is because windows 95 doesn't know how to manage a CPU. For this reason software like rain or Waterfall, or CPUCool are introduced. The they are sending a HLT instruction to the CPU. This causes the CPU to halt and wait for new triggers to work. I've tested the mentioned programs in the VM, but they don't work, but generate errors. anyone has a valid workaround, solution ?? btw. I know that the best solutiuon is to replace the windows95 with windows XP. But in our situation that will take at least 5 years. Our windows 95 systems are running factory process control software.....

Read the article

Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

- by Wolfgang Plaschg

When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

Read the article

Current trends in Random Access Memory

- by Nutel

As I know for now because of laws of Physics there will be not any tangible improvements in CPU cycles per second for the nearest future. However because of Von Neumann bottleneck it seems to not be an issue for non-server applications. So what about RAM, is there any upcoming technologies that promise to improve memory speed or we are stack with the current situation till quantum computers will come out from labs?

Read the article

When will we get Sandy Bridge support?

- by Gu3miles

I'd like to build a machine running Ubuntu and using the new Sandy bridge (i5 2500 specifically) intel cpu's. I heard that 10.10 doesn't have the best support (or simply won't work) with the new cpus and 1155 mobos. I'm assuming that 11.04 will have support but do the alpha's have it already? Or will I have to wait? Also, I plan to use the onboard Intel graphics (H67 mobo), will there be support for this or will I still need to use a graphic's card?

Read the article

How to split up levels? (cocos2d,box2d,iphone) to save CPU and memory?

- by cocos2dbeginner

Hi, so I'm going to create large levels. But there's a problem: There's much unseen space (it's a jump'n run like mario bros.) and this will use memory + cpu. so how could I split up my levels? I'm using Box2D+ cocos2d for iphone. Any ideas? Mayby just set the visible property to NO? But it would be still in the memory :(. But what with the box2d bodies? Destroy and recreate them would be to heavy for the FPS, because I have physics built in which should not be recreated. Should I make fix points where i want to split the level up, than if the player is 200 px away it should preload it. and if the player is 200 px away from the last part of the level I unload it. But there would be the problem with the physics, because on the start of the level it has a unique movement and later if i destroy and recreate it it would do the same. but i don't want that. other ideas?

Read the article

ACPI 30k+ interrupts per second

- by ultimatebuster

My computer is currently doing something like 30k+ interrupts per second. This causes battery issues as well as the CPU being always stuck at the highest speed, making it very hot (overheating.. 75C at IDLE) Powertop info: 99.4% (32052.4) [acpi] <interrupt> 0.3% (115.9) [iwlagn] <interrupt> Just to clarify this started suddenly a couple of days ago. It didn't have this issue before (though I had a tonne of headaches with Linux on my computer in general..)

Read the article

Low Profile AMD Cooling

- by J. T.

I have a few setups where I can mount two motherboards on top of each other. They are running AMD Athlon 64 x2 dual core 4200 CPU's using a very low profile CPU cooler. These coolers are loud and annoying. Does anyone know of a low profile QUIET CPU cooling solution?

Read the article

Low Profile AMD Cooling

- by J. T.

I have a few setups where I can mount two motherboards on top of each other. They are running AMD Athlon 64 x2 dual core 4200 CPU's using a very low profile CPU cooler. These coolers are loud and annoying. Does anyone know of a low profile QUIET CPU cooling solution?

Read the article

What does "cpuid level" mean?

- by ogzylz

For an example, I put just output from 1 core of a 16 core machine. What does the output mean by "cpuid level" of "6"? Also, what do "bogomips" of "5992.10" and "clflush size" of "64" mean? processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception: yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment: 128 address sizes: 40 bits physical, 48 bits virtual power management:

Read the article

In terms of performance, which processor is more suitable?

- by Roberts

My computer specs: Motherboard: Gigabyte GA-945PL-S3 OS: Microsoft Windows 7 Ultimate CPU Socket: LGA775 CPU: Intel® Core™2 Duo Processor E4300 (2M Cache, 1.80 GHz, 800 MHz FSB) After I bought new hard drive (Western Digital 250GB, 7200rpm, 32MB, Sata III, Caviar Blue, WD2500AAKX) I saw that my processor temperature started to raise to higher value then before. Now while surfing internet it goes to 70°C. Cleaned my motherboard - nothing; cleaned fan - nothing; replaced thermal paste - nothing; replaced thermal paste with care - still nothing. So I went to friend just to check if he doesn't have any spear fan, and he did. But with fan he had another processor that he didn't need and he wanted to give it to me, but I told him that I will think about this. So my CPU, he's CPU (Intel® Pentium® D Processor 820 (2M Cache, 2.80 GHz, 800 MHz FSB)). Question: which proccesor is better for gaming and for recording games?

Read the article

What is causing sudden freezing during running real-time program?

- by Trevor Boyd Smith

So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

Read the article

ACER ASPIRE V3-571G-9435 Fan not kicking in leading to overclocking

- by brythespy

This laptop has always had this problem. The temperatures kick up to the thermal ceiling of 99C for the CPU (i7-3610QM) and 94C for the GPU (GT 640M). Problem is, the FAN doesn't give a damn. It's actually QUIETER when the temperatures are that high, than when it's at 60C or so. I figured it was a problem with the BIOS, so I updated that, no change. So maybe it was a problem with windows? Nope, same result on gaming with Ubuntu. The major problem of this, is that after gaming for ten minutes the CPU throttles itself to 1197MHz(as opposed to 3193), and the GPU goes down to 135MHz( as opposed to 843MHz). The problem is that the fan won't kick in like I know it can, because when the laptop is in POST, like at BIOS setup, the fan is like a vacuum cleaner it's so loud! I don't really care about noise, so I'd love to have the fan like that all the time as long as the temperatures don't fly through the roof... So, things I've tried so far, to avoid possible duplicate answers. Checked for dust: It's been this way since the laptop was new, and I've since then taken it apart. No dust buildup. Background stuff running?: No, problem persists across OS'es, and it happens while gaming anyways Manually underclocking both CPU/GPU: Using windows, I can force the CPU to stay at 1.1GHz, but the temperature STILL easily hits 99C after 5 min of gaming Contacted Acer support?: No help at all. They told me to update and reset the BIOS, which I have done multiple times. There are only about 6 changeable things anyway, none of which should affect the FAN control Third party fan control program?: None detect the fan So, I'm screwed until I can afford to replace this laptop, but I am very satisfied with performance in games... Whenever the CPU/GPU aren't being throttled. Anyone that can offer advice to solve this problem would be greatly appreciated. Hell, if you solved my problem I'd send you some monies through paypal.

Read the article

why allow windows to disable one core? [closed]

- by saber tabatabaee yazdi

i teach MCITP for students and when describe about Disabling a Device Drivers , one of them ask me : why allow windows to disable drivers that windows need them? why windows allows to disable drivers, like disable cpu? like disabling graphic card? windows in many cases cant apply but allow to disabling CPU or etc. i am searching and find articles that describe how to disable CPU. but i am not Convinced WHY WE CAN DISABLE THESE drivers!!

Read the article

Is it possible to get a list of running processes with a Cloudwatch Alarm?

- by jtalarico

We have an EC2 instance (Ubuntu) that has a few java-based applications and lately we're getting hit with high CPU utilization spikes that trigger one of our Cloudwatch alarms. By the time we get into the server to look at the cpu utilization, things have calmed down. What we'd love to see in one of the alarm emails is a list of running processes and their cpu utilization(%) at the time of the alarm. Is this even possible?

Read the article

Ubuntu 12.04 3.2 Kernel showing incorrect "cache size" in cpuinfo?

- by Tom G

2x Xeon E5620 . 16 Cores altogether. /proc/cpuinfo shows cache is only @ 4096kb According to intel this should have 12MB of "smart cache". Doing searched for E5620 and CPUinfo shows the correct number: cache size : 12288 KB However mine shows this: processor : 15 v endor_id : GenuineIntel cpu family : 6 model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping : 2 microcode : 0x1 cpu MHz : 2400.104 cache size : 4096 KB fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx bogomips : 4800.20 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual Any idea on why it shows like it's missing 8MB in CPU cache? .

Read the article

Optimizing Apache for large file serving

- by D_Guy13

I have a random problem with Apache that I can't quite figure out, here is my setup, Windows Server 2008 R2, 64 Bit, 5GB RAM, SSD with 200 MB(Read/write) and Dual Core CPU @ 2.1 GHz A dump from mod-staus, Server Version: Apache/2.4.7 (Win32) mod_limitipconn/0.24 mod_antiloris/0.5.2 PHP/5.5.9 Server MPM: WinNT Apache Lounge VC11 Server Built: Nov 21 2013 20:13:01 Current Time: Thursday, 21-Aug-2014 23:38:06 W. Europe Daylight Time Restart Time: Thursday, 21-Aug-2014 20:30:47 W. Europe Daylight Time Parent Server Config. Generation: 1 Parent Server MPM Generation: 1 Server uptime: 3 hours 7 minutes 18 seconds Server load: -1.00 -1.00 -1.00 Total accesses: 283025 - Total Traffic: 1172.2 GB 25.2 requests/sec - 106.8 MB/second - 4.2 MB/request 62 requests currently being processed, 388 idle workers Serving large .zip & iso files using mod_xsendfile. (File size range 500 MB - 1.5 GB) The setup works and is running fine. CPU usage is very unstable, jumps all the time between 10% - 90% and the servers goes down when it hits 100%. In that case I have to hard restart the server. Server it outputting traffic at 30 Mbps. Is there anything else I should think about to get a more stable CPU usage? Is that CPU usage normal? Can switching to Linux help me achieve better CPU usage?

Search Results

Search found 5887 results on 236 pages for 'cpu temperature'.

Page 28/236 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35 | Next Page >

- by Poni

- by Newton

- by voxelizr

- by guywhoneedsahand

- by Ben

- by aschuler

- by Radu

- by ericl42

- by RadarNyan

- by brtlvrs

- by Wolfgang Plaschg

- by Nutel

- by Gu3miles

- by cocos2dbeginner

- by ultimatebuster

- by J. T.

- by J. T.

- by ogzylz

- by Roberts

- by Trevor Boyd Smith

- by brythespy

- by saber tabatabaee yazdi

- by jtalarico

- by Tom G

- by D_Guy13

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35 | Next Page >