Search Results

Search found 20300 results on 812 pages for 'link listing'.

Page 282/812 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Separated virtual networks with same subnet range with 2 interface

    - by Coolpet
    I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

    Read the article

  • Relinking a deleted file

    - by mbac32768
    Sometimes people delete files they shouldn't, a long-running process still has the file open, and recovering the data by catting /proc/<pid>/fd/N just isn't awesome enough. Awesome enough would be if you could "undo" the delete by running some magic option to ln that would let you re-link to the inode number (recovered through lsof). I can't find any Linux tools to do this, least with cursory Googling. What do you got, serverfault? EDIT1: The reason catting the file from /proc/<pid>/fd/N isn't awesome enough is because the process which still has the file open is still writing to it. A delete removes the reference to the inode from the filesystem namespace. What I want is a way of re-creating the reference. EDIT2: 'debugfs ln' works but the risk is too high since it frobs raw filesystem data. The recovered file is also crazy inconsistent. The link count is zero and I can't add links to it. I'm worse off this way since I can just use /proc/<pid>/fd/N to access the data without corrupting my fs.

    Read the article

  • openvpn in a bridge?

    - by sebelk
    I have a somewhat tricky proble to solve. We have a wireless link between 2 building. One of them has an mikrotik and below there are some vlans. Some machines of one vlan need to use openvpn to connect to a remote private lan. I put a TP-Link WR1043ND (which those machines connect to) with openwrt with ebtables just in case I need it. I've configured openwrt in such a way that all ports belongs to the same vlan. My idea was to make things as transparent as I can. It has a bridge as follows: usr/sbin/brctl-full show br-lan bridge name bridge id STP enabled interfaces br-lan 8000.f8d111565716 no eth0.1 eth0.2 Also I've added an ebtables rule: ebtables -t broute -A BROUTING -p ipv4 -j DROP So "bridge" has only one IP address. I've installed openvpn and I'm trying to bring up the tunnel but I can't still get working. Sure, someone can says why don't you use the vpn on the mikrotik, there are some reasons, the first one is I have little experience with mikrotik and I'd want to have the vpn at hand :) The problem is that openvpn is not working, because it is complaining that I have only one Ip Address on the server side. So I set up and alias interface with another IP address but is not working either: : Rejected connection attempt from IP-Client-Side:37801 due to --remote setting Is there a way to make it work?

    Read the article

  • Static IP addressing issue in Ubuntu on BeagleBoneBlack Rev C

    - by Stringfellow
    I have my BBB configured to use a static IP address using the following in the file /etc/network/interfaces: allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 network 192.168.0.0 This seems to work ok on boot, but when the ethernet cable is unplugged and then plugged back in, I lose the IP address. Any ideas what's going on here? Another weird symptom: If I boot the BBB with the network cable unplugged, but the switch it's plugged into off, I'll get my static IP. But, when I turn the switch on, I'll get a DHCP-assigned address. This is even though I have it configured with a static IP address. One last thing. If I ifdown etho, the interface will be gone when I do an ifconfig. If I wait a few seconds, though, and then re-run ifconfig, it will reappear, without an IP address. (Before I disabled IPv6, I used to get a IPv4 DHCP address in this case... weird). When that happens, I get a message like this in /var/log/messages: Apr 23 20:32:06 beaglebone kernel: [ 737.170172] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Apr 23 20:32:06 beaglebone kernel: [ 737.170304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Here's my uname -a: root@beaglebone:/etc# uname -a Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux Any ideas what's going on here?

    Read the article

  • VPN with VLANs? [closed]

    - by Craig
    As usual, I'm sure I'm in way over my head on this one. My networking skills are limited; so, bear with me if you will. What I have are a few testing servers at my house as well as at a friends house that I want to link together so they can see each other (VPN right? I've done those before). We want to be able to see all the servers and work with them from either location. All the servers also need to be able to see each other. But, we don't want to see each others PCs, printers, PS3s etc. How do we pull that trick off? Multiple VLAN?... subnets?... what? If hardware matters, I have an old PC I was planning on loading pfSense onto because my current el-cheapo router doesn't support VPN. The VPN linking the houses is about the only thing I'm sure on. Beyond that, I'm lost. I'm not a complete noob; but, like I said, I'm not so sharp with the more complex networking. I do however read well... So use lots of descriptive words and feel free to link away to long dry articles if necessary. :-)

    Read the article

  • Force Installing a Radeon HD 2100 on Windows 8

    - by Click Ok
    I'm trying force installing a Radeon HD 2100 on Windows 8. I've found that link from AMD with the drivers for Windows7: http://support.amd.com/us/gpudownload/windows/legacy/Pages/legacy-radeonaiw-vista64.aspx I know too that AMD will stop support Radeon HD 400 and older: http://www.techspot.com/news/48321-amd-drops-windows-8-support-for-radeon-hd-4000-and-older.html Now, let's go to the problem. If I try install the 12.6 driver, Windows will stick with the "basic display adapter", and this is bad for 3d games like Minecraft, that runs really slow now compared with the previous Windows7 installation. Forcing install the catalyst driver can help to fix it. So, I follow that steps: Extract the Catalist Driver (C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql) Right click the "basic display adapter" on device manager, and "update driver" Search on PC I will choose the driver "With Disk" "C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql\Packages\Drivers\Display\W76A_INF" There is a big list of drivers and the nearest driver to HD 2100 is "Radeon HD 2350 Series" My questions: Why isn't "Radeon HD 2100 Series" listed? (or Where is it listed?) In theory it must be listed" The first link above show that "This article applies to the following configuration(s):" (...) "AMD Radeon HD 2000 Series" Am I doing something wrong?

    Read the article

  • Same script, different behavior [migrated]

    - by Antoine_935
    I just stumbled upon an interesting bug... Still trying to figure out what is exactly happening. Maybe you can help. First, the context. I'm currently building yet another man to html converter (for some reasons I won't motivate here, but I need it). So, have a look at the screenshot below (see the link), more precisely at the outlined spots. See? On the upper shell, I have &lt ; and &gt ;, that is, escaped html. While on the shell below I have < and directly. But as you can see (or do I seriously need looking glass ?), the command man 2 semget | webmanneris the same on both sides, as is the which webmanner. The two are executed roughly at the same moment, with no modification made to the script between. [Oops, cannot post pictures just yet... Here comes the link] http://aspyct.org/media/webmanner-bug.png But the shell below is older (open about 1 hour ago). Newer shells all print out &lt ;. So my first guess was that it somehow had a cached reference to the old inode of the file, or old blocks or whatever. So I modified parts of the script, at the start and then at the end, to print different messages. And, surprise, the message shown up on both terminals. But still, same difference between &lt ; and <. I'm confused... How to explain that behavior? I'm working on a OSX 10.8 (Mountain Lion) EDIT: OK, there is one big difference: the shell below uses ruby 1.9.3, while above is 1.8.7. Is there any known difference in string handling between the two versions ?

    Read the article

  • cannot get mssql working with sql server 2005

    - by Ryan
    I'm a MySQL/Apache user, trying my hand with IIS and SQL server, so please, if this is a stupid question have patience. I'm using IIS version 7.5. PHP version 5.3.13 and SQL server 2005 IIS is running on port 90, not sure if that will make a difference or not. I know my sql server is running because I can explore/connect to it in Server management studio. I know php is configured properly, because //localhost:90/phpinfo.php works fine. I updated the php_msql.dll extension in phpinfo to: extension=ext/php_msql.dll EDIT- However, when I run phpinfo() under the "configure command" row, this is present: --without-mssql I found/downloaded the ntwdblib.dll and placed it in both sys32 and php root. All these things were supposed to fix the issue, and they haven't. This is the code I'm using, straight from php.net: <?php // Server in the this format: <computer>\<instance name> or // <server>,<port> when using a non default port number $server = 'localhost'; // Connect to MSSQL $link = mssql_connect($server, 'uname', 'pwd'); if (!$link) { die('Something went wrong while connecting to MSSQL'); } ?> obviously I'm using a real username and password, but when I load the file in my browser, I receive a 500 error. Upon checking the log, this is what is displayed: 2012-06-25 12:41:29 ::1 GET /test.php - 90 - ::1 Mozilla/5.0+(Windows+NT+6.1;+WOW64)+AppleWebKit/536.5+(KHTML,+like+Gecko)+Chrome/19.0.1084.56+Safari/536.5 500 0 0 5 That (to me) doesn't help me much. What am I doing wrong? Thank you

    Read the article

  • Slow loading Magento Commerce homepage

    - by Matt
    I have recently changed by website and it is really loading slowly :- dancemidisamples.com here is a report http://www.webpagetest.org/result/120906_78_ANK/ As far as I can tell the is a issue with this section of code <link rel="icon" href="http://www.dancemidisamples.com/skin/frontend/base/default /favicon.ico" type="image/x-icon" /> <link rel="shortcut icon" href="http://www.dancemidisamples.com/skin/frontend/base/default/favicon.ico" type="image/x-icon" /> <script type="text/javascript"> //<![CDATA[ var urlSkinsite='http://www.dancemidisamples.com/skin/frontend/em0040/default/'; //]]> </script> <!--[if lt IE 7]> <script type="text/javascript"> //<![CDATA[ var BLANK_URL = 'http://www.dancemidisamples.com/js/blank.html'; var BLANK_IMG = 'http://www.dancemidisamples.com/js/spacer.gif'; //]]> </script> <![endif]--> Does anyone have any ideas, people have told me it my DNS but it has a 49ms response rate according to http://www.webpagetest.org/result/120906_78_ANK/1/details/cached/ We are hosted with rackspace so I dont see how it could be the server. Its a dedicated server not cloud hosted

    Read the article

  • Suggestions for transitioning to new GW/private network

    - by Quinten
    I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

    Read the article

  • IIS no longer saving session variables

    - by John
    I'm running IIS v7 on a Win7 development machine. I have PHP code that saves session variables and calls them back later. This has been working on this machine for some time. For some reason now, the session variables dissapear immediatly after saving. Code that used to work fine on http://localhost/, suddenly now does not. I have tested different browsers - the vars dissapear regardless of browser. I have tested identical code on different servers. The problem exists only on this development machine. I tried some code that saves a session var, then reads it back and displays it, then shows a link to click on to read it back and display again. What happens is the session var DOES get written and read back and displayed ok. But when you click the link to view it again, it's gone. I don't recall making any changes to IIS. But I did run several malware scanners and clean-up tools. Is anyone aware of any setting in IIS that disallows session vars? Any other throughts?

    Read the article

  • Mac Outlook showing all links in smart quotes?

    - by user2727128
    I was given the task of fixing my friend's email today and really don't know what the problem is. When an email is sent from his laptop (Mac) from Outlook the email address link in the signature shows exactly like this: [email protected]<mailto:[email protected]>. Additionally the website link displays like this: www.website.com<http://www.website.com>. And lastly, the image comes through as cid:randomstringofnumbers. When I sent him an email and he sent one back it converted my signature to same weird formatting. Plus, even in the header where it shows our emails, they are displaying the same way: [email protected]<mailto:[email protected]>. And the weirdest thing is that this problem seems to be "compounding". So when I scroll down to the last, most recent email in the thread I see this www.website.com<http://www.website.com> next email shows this: www.website.com<http://www.website.com><http://www.website.com> and the next this: www.website.com<http://www.website.com><http://www.website.com><http://www.website.com> This is happening to the emails too, everywhere. I'm thinking this might be something to do with smart quotes and the auto formatting but I'm not sure. Could this be the problem? And if so how do I fix it?

    Read the article

  • Online FTP or file sharing service [on hold]

    - by Frede
    We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

    Read the article

  • Can't connect to wi-fi hotspot in Ubuntu 11.10

    - by ht3t
    I'm new to Ubuntu. I'm having a wireless network problem in Ubuntu 11.10. I made a hotspot using Connectify from a computer which is running Windows 7. I can access it in Windows 7 but not in Ubuntu 11.10. Every time I access it,I get a message "disconnected". I'm using msi fx 400 notebook with Intel Centrino wireless -N 1000 wireless card. Ubuntu version is 11.10 with KDE desktop. $ sudo lshw -c network [sudo] password for ht3t: *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:56:b8:f0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:44 memory:e7400000-e7401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 40:61:86:b6:b1:a2 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw IP=192.168.21.107 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:9000(size=256) memory:e6004000-e6004fff memory:e6000000-e6003fff I can't do anything without internet connection. How can I fix this?

    Read the article

  • Need solution for Network/Servers.

    - by rehanplus
    Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

    Read the article

  • Multiple SSL certificates on one server

    - by Kyle O'Brien
    We're hosting two websites on our fairly tiny but dedicated production server. Both website require SSL authentication. So, we have virtualhosts set up for both of them. They both reference their own domain.key, domain.crt and domain.intermediate.crt files. Each CSR and certificate file for each site was setup using its own unique information and nothing is shared between them (other than the server itself) However, which ever site's symbolic link (set up in /etc/apache2/sites-enabled) is reference first, is the site who's certificate is referenced even if we're visiting the second site. So for example, assume our companies are Cadbury and Nestle. We set up both sites with their own certificates but we create Cadbury's symbolic link in apache's site-enabled folder first and then Nestle's. You can visit Nestle perfectly fine but if you check the certificate installation, it reference's Cadbury's certificate. We're hosting these websites on a dedicated Ubuntu 12.04.3 LTS server. Both certificates are provided by Thawte.com. I came across a few potential solutions with no degree of success. I'm hoping someone else has a decent solution? Thanks Edit: The only other solution that seems to have provided success to some people is using SNI with Apache. However, the setups here didn't seem to coincide with our setup at all.

    Read the article

  • Browser: Randomly Opens Pages in New Windows Without Reason?

    - by Mark R
    This is a very strange thing I've noticed on my computer and past computers over this past year or more. I know when page are meant to open in a new Window and know which settings to use on my browser for this. But on both my browsers Chrome and Firefox, I have this really strange issue. I'm starting to think it's a hacker. When I right click links and select Open Link in New Tab, sometimes they will randomly open in a new window and today it is happening a lot. Like lots and lots. I'm getting really creeped out by it and YES I understand when a link opens in a new window and when it isn't supposed to. And none of these links are meant to open in a new Window. Let me give you an example: I searched Google about my issue and clicked on the result that I thought good. It opened in a new tab but half way through loading in new tab it opens into a new window. Recently, I decided to record my screen and while recording my screen using Camtasia, the issue stops. When I stop recording it starts again, as if it's a human operated issue. VERY strange. This has been going on for months on my old and new computer and on both Firefox and Chrome. Is there something I can do to fix this intermittent problem?

    Read the article

  • How can I change the file name of the Program Files (x86) folder?

    - by Madrauk
    Let me stop you before the "you shouldn't do that" and "you will corrupt your file paths". I know what I'm doing, but I'll give you the story to convince you. Basically, my hard drive is failing to the point where programs installed on it are not responding consistently. So, in preparation for my replacement, I'm moving as many files as possible to my secondary because the new drive will be smaller (it's an emergency I can't buy a fancy expensive new drive) and so I can actually use my computer until the new drive comes in. The basic idea behind what I'm doing is I've copied the contents of the Program Files x86 folder to another spot on my other drive, and I want to replace the original folder in the C drive with a symbolic link that points to the other drive, so the programs can run from that drive and be fine but it will save space on my C drive and simplify the moving process when the new one comes in. To do that, I need to rename the program files folder, make the symbolic link, hopefully delete the program files folder, then restart my computer so all the programs are running properly and I can confirm it works. Now that I've told you why, can anyone help me out?

    Read the article

  • How to set up vpn tunnel (ipsec) connection

    - by Alfwed
    I'm working with a client who wants to set up a vpn tunnel between their network and ours. They're in charge of the tunnel and to give us the access they are asking me my public IP and my LAN IP. This is what i've got when i do an ifconfig on the server i will use to connect to the vpn $ ifconfig eth0 Link encap:Ethernet HWaddr d4:ae:52:cd:xx:xx inet adr:62.210.xxx.xxx Bcast:62.210.xxx.xxx Masque:255.255.255.0 adr inet6: fe80::d6ae:52ff:xxxx:xx/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:55255032 erreurs:0 :779628 overruns:0 frame:0 TX packets:5419527 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:5598164393 (5.5 GB) Octets transmis:1034297288 (1.0 GB) Interruption:16 Mémoire:c0000000-c0012800 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:45923382 erreurs:0 :0 overruns:0 frame:0 TX packets:45923382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 The inet adr:62.210.xxx.xxx is my public IP but it seems like i dont have any LAN IP. Can the connection work without LAN IP or should I create a private network somehow?

    Read the article

  • CentOS 6 and Sun/Oracle Java Issue

    - by user1710563
    I have a OpenVZ VPS running CentOS 6.3 64 bit and when I try to install JRE 7 64bit using the command: rpm -Uvh java.rpm It gives me this error: Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack I then tried the command: java -version And it gives me this error: Error occurred during initialization of VM Could not reserve enough space for object heap Error: Could not create the Java Virtual Machine Error: A fatal exception has occurred. Program will exit. Why does this happen if I have more than enough RAM on the VPS to run this (1GB)? Could it be an issue with the host node of the VPS? Thanks EDIT 1: Link to beancounter screenshot http://puu.sh/1xwxB EDIT 2: Link to htop screenshot http://puu.sh/1xwDl

    Read the article

  • Making buttons - <button> or <div> ?

    - by user246114
    Hi, I'm wondering what html element to use for buttons on a web page - I'd like to style my 'buttons' like twitter does. For example: http://twitter.com/twitter the "more" button at the bottom of the tweet listing - is that a <button> element, or a <div> element? I'd like to know which to use. I think for either <button> or <div> we can supply rollover states and all that stuff to make it look pleasant? Thanks

    Read the article

  • NHibernate: QueryOver<> help

    - by Andy Baker
    Hi, I'm just starting out with NHibernate and I'm having trouble with running more complex queries. I have entities with a list of tags attached. The user will provide two lists of tags, include and exclude. I need to find all the entities that have all of the include tags, and exclude any entites that have any tag in the exclude list. Below is my first effort- which is clearly wrong as its listing all Display objects that have any of the include tags rather than all! Any assistance is greatly appeciated. var includeTagIds = (from tag in regime.IncludeTags select tag.Id).ToList<int>(); var excludeTagIds = from tag in regime.ExcludeTags select tag.Id; var displays = session.QueryOver<Display>() .JoinQueryOver<DisplayTag>(display => display.Tags) .WhereRestrictionOn(tag => tag.Id) .IsIn(includeTagIds).List().Distinct(); return displays.ToList();

    Read the article

  • Intellij Community can't use http proxy for Maven

    - by MikeHoss
    I have Intellij IDEA Community installed on a Linux box that needs to use an authenticated proxy to get to the Internet. I have a system-wide proxy on the box that works, and I have the proxy configured in ~/.m2/settings.xml. Maven correctly uses the proxy when I run try it from the command-line. I have the same proxy configured within Intellij and it gives me the plugins listing correctly. But when I try to sync with the Maven repository withing Intellij I keep getting this: [WARNING] Unable to get resource 'org.codehaus.mojo:hibernate3-maven-plugin:pom:2.2' from repository restlet (http://maven.restlet.org): Authorization failed: Not authorized by proxy. I went to Settings-Maven and put in the proxy info as properties and that didn't work. I can see by looking at those settings that Intellij is reading my ~./m2/settings.xml fine because it knows where my local repo is (it's in a non-standard place). Anyone know how I can get this working?

    Read the article

  • Validation in asp.net MVC - validation only to happen when "asked"

    - by jeriley
    I've got a slightly different validation requirement than the usual "when save, validate!". The system can allow someone to update a bunch of times without being "bothered" with a validation listing UNTIL they say it's complete. I thought I might be able to pull a fast one and put the [HandleError] on the method of which this would fire, but that validates every save. Is there an attribte I can put into my custom validator that can handle this or am I going to have to write up my own HandleError attribute?

    Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >