Search Results

Search found 9928 results on 398 pages for 'facebook authentication'.

Page 285/398 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• Network Performance issue

  - by qubemarker

  We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

  Read the article

• Networking issues with WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off.

  Read the article

• Should I install an AV product on my domain controllers?

  - by mhud

  Should I run a server-specific antivirus, regular antivirus, or no antivirus at all on my servers, particularly my Domain Controllers? Here's some background about why I'm asking this question: I've never questioned that antivirus software should be running on all windows machines, period. Lately I've had some obscure Active Directory related issues that I have tracked down to antivirus software running on our domain controllers. The specific issue was that Symantec Endpoint Protection was running on all domain controllers. Occasionally, our Exchange server triggered a false-positive in Symantec's "Network Threat Protection" on each DC in sequence. After exhausting access to all DCs, Exchange began refusing requests, presumably because it could not communicate with any Global Catalog servers or perform any authentication. Outages would last about ten minutes at a time, and would occur once every few days. It took a long time to isolate the problem because it was not easily reproducible and generally investigation was done after the issue resolved itself.

  Read the article

• Mounting an Amazon EC2 instance on Mac OS X

  - by hinghoo

  I've got public key authentication working between my Mac OS X and an Amazon EC2 instance so that from the command-line I can just type the following and it works: ssh root@[IPAddressOfEC2Instance] The strange thing is that I can't seem to mount the instance using "Connect to Server" in the Finder. I've tried typing the following server addresses into the "Connect to Server" dialog: ftps://[IPAddressOfEC2Instance] ftps://root@[IPAddressOfEC2Instance] But all I get is You entered an invalid username or password. Please try again. The root user on the EC2 instance has a blank password and I'm wondering if it has to do with that. However, I can't change the password for the root user. I can use an SFTP client to connect to the machine, I just can't mount it with "Connect to server". It asks for a username and password (for a registered user) and it's root/[blank] which it doesn't accept. The other option is "Guest" which brings up an empty folder in the Finder.

  Read the article

• Exchange stops working after changing System Time

  - by L.M

  I am currently in a situation where the system time of my windows machine differs 6 hours from the actual local time. I tried chaning the system time of my windows machine 6 hours back to match the actual local time. The issue is, when the system time is changed, Exchange stops working as it wont start anymore. When i change the time back Exchange works again. Here is the error that it shows when im trying to open the management console after changing the system time. The Follwing error occured while attempting to connect to the specified server "servername". The attempt to connect to http://servername/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_remote_troubleshooting Help topic. Any Solutions to this problem?

  Read the article

• non-interactive ssh sudo... prompts for the password in plain text

  - by Iain

  I'm running some non-interactive ssh commands. The ssh authentication is taken care of fine through the ssh agent, but if I run a command that requires sudo then the password prompt in my terminal is plain text. For example: ssh remotemachine "sudo -u www mkdir -p /path/to/new/folder" will prompt me for the password in plain text. Does anyone know how I can get it to use the normal secure prompt or that I can pass the password via a switch? (as then I can set up a secure prompt on this side before I send the command) Any help is much appreciated.

  Read the article

• Is it necessary for a Windows Server 2008 R2 to join a domain so that its IIS can communicate correctly?

  - by Jack

  I have a Windows Server 2008 R2 that is not join to any domain. I have developed an web application that will display the domain name and the username on the server itself. However, when I publish my web application to IIS, it always fail and display different types of error messages (because I change settings such as Enabled ASP.NET Impersonation, Disable Anonymous Authentication, Set Application Pool to Classic and so on) So, I was wondering if it is necessary for the Server to join in a domain so that I can reduce any unnecessary error message and be able to zoom into the correct direction?

  Read the article

• Firefox hangs after upgrade to version 3.6.11

  - by Yasmine

  I just upgraded firefox to version 3.6.11 and after the installation was done I got the message that adobe flash player 10.1 needs to be downloaded so I did (even though the flash player I had before upgrading firefox was 10.1 but I reinstalled it coz I thought that since firefox got updated so it needs the plugin to be installed again) and after that whenever I open any website with flash in it (like youtube or facebook games), firefox hangs and stops responding. I don't know if this is related to firefox upgrade or the flash player. Can anyone help me on this? Thanks

  Read the article

• Need to scale quickly. Which cloud service should I use?

  - by mk1000

  Traffic to my facebook app is growing at an insane rate and I need some suggestions on how to scale. I'm probably not going to even be able to keep it running by the day's end, as it's hosted from my already overloaded dedicated server. I need to either move it to its own box or a cloud service like e2c. Something like e2c seems like the way to go, but my server admin skills are terrible. Is there a good front end management UI for e2c or another hosting service that is comparable in cost that is fully managed? I don't mind going with something a bit more expensive now if that means I can get everything switched over and running within 24 hours.

  Read the article

• Central Storage for windows user accounts homedirs .. hardware/software needed?

  - by mtkoan

  We have ~120+ users in our network, and are endeavoring to centralize logon authentication and home directory storage server-side. Most of the users are Windows 2000/XP machines, and a few running Mac OS X. Ideally the solution will be open-source-- can this all be managed from a Linux server running LDAP and Samba? Or would a hacked-NAS Box with a FreeNAS or similar suffice? Or is Micro$oft's Active Directory really the preference here. Is it viable to store PST files on this server for users to read from and write to? They are very large ~1.5gb. We have no mail server (or money) capable of Exchange or IMAP, only an old POP3. What kind of hardware horsepower and network architecture should we have for this kind of thing?

  Read the article

• Unable to connect to vrde virtualbox VM remotely

  - by b1ackjosh

  So I've remotely created my first headless using ssh. Now I'm attempting to connect to this VM using RDP so I can install Ubuntu Server, but I cannot get connected at all. When starting the VM everything appears fine: $ vboxheadless -s WebTesting Oracle VM VirtualBox Headless Interface 4.0.16 (C) 2008-2012 Oracle Corporation All rights reserved. VRDE server is listening on port 4455. And showvminfo shows: VRDE: enabled (Address 0.0.0.0, Ports 4455, MultiConn: off, ReuseSingleConn: off, Authentication type: null) However I'm still prompted with the "enter your credentials" screen every time I attempt to connect. From reading the documentation null shouldn't prompt me with this screen at all... Any help with this is greatly appreciated. P.S. I am using ssh tunneling in putty to tunnel in to my network.

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• How to connect to VPN using commands in Linux (Fedora 16)

  - by WarFox

  Usually, I use the network connections icon on the top bar to connect to VPN. The connection is configured properly and it connects well. Configuration screen shot is given below. As you can see I have selected the 'Connect automatically' option. But this option doesn't help in connecting to VPN automatically upon login. This is my university VPN and it uses 'Point-to-Point encryption (MPPE)' for authentication I need to connect to the VPN using command line, so that I can write a script and run it at start up, so the connection is automatically established every time I login. This will also help in connecting to VPN when I login from 'init 3' mode. I depend on this VPN connection for my internet access. Please help me with the required commands.

  Read the article

• Why am I having trouble viewing HTTPS websites only using Chrome only on my employer's network?

  - by user1742777

  I'm using Google Chrome on my new MacBook Pro that has been provided to me by my employer. Many of the HTTPS sites I visit do not work when I visit them using Google Crome while I am connected to my employer's network. Example: www.facebook.com These same sites work perfectly fine if I use a different browser (like Safari) or even with Chrome when my Macbook is connected to my home WiFi network. Chrome reports the error: "The certificate was signed by an unknown authority". See attached screenshots. How can I resolve this problem? I really want to use Chrome. But not having access to numerous important work and outside websites is unacceptable.

  Read the article

• Fedora: "Login Incorrect"

  - by darkblackcorner

  I've just set up a minimal install on my netbook (the default was too resource hungry, so I figured I'd customize the install and learn something about linux at the same time!) No problems logging in as root, but when I create a new user and try to login as them I just get the "Login incorrect" error. I'm certain the password is correct, though the secure log displays an authentication error. Am I missing a permission somewhere? useradd test usermod -p [pwd] test Shell is added automatically I think (checking password file says shell is /bin/bash) I've tried adding the user to the sudo-ers group usermod -a -G wheel which doesn't help. I've kept the password simple in order to rule out human error.

  Read the article

• Remote Destkop into Server 2008R2 with Firewall On

  - by Eternal21

  I've got a fresh install of Remove Server 2008 R2, 64 bit. The problem is I can't Remote Destkop into it. I clicked 'Enable Remote Desktop' inside 'Initial Configuration Tasks', and set it to: Allow connections only from computers running Remote Destkop with Network Level Authentication (more secure). The thing is, this used to work just fine, and then it stopped. The only way I can get it to work now is if I turn of Windows Firewall completely off (Public network location settings). Obviously I don't want to run the server with firewall off, so what specific settings in Firewall do I need to disable, or am I doing something wrong?

  Read the article

• Managing multiple ssh keys

  - by Mathijs Kwik

  I have a lot of ssh keys, they are all passphrase protected and managed by ssh-agent. As a result of this, I am now getting "Too many authentication failures" on some connections. As has been explained on this site before, this is because ssh will try all keys the agent throws at it. The proposed solution is to use IdentitiesOnly in the config, together with an IdentityFile. While this indeed stops offering wrong keys, it seems it completely disables the agent in full, so now I have to type the passphrase on every connection. I could not find clear info about this. Does IdentitiesOnly just disable getting keys from ssh-agent in full? Or should it just block out the keys that aren't mentioned? Thanks, Mathijs # here's my config ~% cat .ssh/config Host bluemote HostName some.host.com IdentitiesOnly yes IdentityFile /home/mathijs/.ssh/keys/bluebook_ecdsa # I had the key loaded into the agent, shown here ~% ssh-add -L ecdsa-sha2-nistp521 SOME_LONG_BASE64_NUMBER== /home/mathijs/.ssh/keys/bluebook_ecdsa # but it doesn't seem to get used ~% ssh bluemote Enter passphrase for key '/home/mathijs/.ssh/keys/bluebook_ecdsa':

  Read the article

• Could 11.5 Million 401's be causing bottlenecks?

  - by roviuser

  I'm going to preface this with a warning: My knowledge about servers and networking is VERY limited, and if you provide me with technical answers, I probably won't understand much until I research your answer further. I'm trying to expand my knowledge and learn about it, though. If the information that I am able to provide in this question is insufficient to answer the question, I understand, and it can be closed. We have a SharePoint 2007 system that is extremely slow, mostly from huge amounts of use. We've been told that the main speed bottleneck is the access to the sql databases. However, they do provide a statistics dashboard, so I did some poking around, and noticed that we have 11.5 million or more 401 - access denied errors every month. Could this be causing major speed/performance decreases? Authentication for sharepoint uses active directory.

  Read the article

• Is it possible to create a full "encrypted worried about privacy" VPS, but still being externally us

  - by Somebody still uses you MS-DOS

  I've been reading a lot of things about privacy, "being in control of your data" and everything, and now a project called diaspora* is trying to be an OSS Facebook alternative. Fact is: you still have to use a server. Even if you use a VPS somewhere, they still have access do your data, so diaspora* isn't that protective shell people are looking for absolute power over your data unless you create a server on your basement. My question is: is it possible to create a really encrypted usable server using a VPS? From database to source files? If not, what it can be "obfuscated" or encrypted? (And just a mention, not really my question, do you think is diaspora* really possible to be made?) (I know if you really want privacy you shouldn't be even using these services and being social, but I'm asking if it's possible to at least avoid companies using your data)

  Read the article

• SMTP 25 blocked externally

  - by Jeff

  not sure how to title this question... we run an exchange server with around 80 internal users, all outgoing mail is relayed off a smart host (ISP smtp server) so nothing is actually sent to the world via our server. i wanted to check the server, locally i can telnet to port 25 with no issues and receive the esmtp service ready reply. whenever i do it from an external address (off our local network) i receive unable to connect error 10060. can this cause problems with SPF records, and reverse DNS ? should my exchange server be able to accept smtp requests, requiring authentication before i am able to send from external addresses? if so how... also the exchange server is behind a NAT (asa) device, more than likely thinking that the nat is not configured to route the smtp 25 request to the exchange server.. thanks

  Read the article

• Emacs doesn't use ~/.ssh/config when accessing files on a remote machine

  - by Yotam

  I have a fresh install of arch Linux. I've installed Emacs from the rpos, and my home directory is mounted from a separate partition. I have old settings I've used on my ~/.ssh/config along with authentication keys I've regularly used before. Now, when I try to connect to a remote machine using Emacs, Emacs asks for my password and uses the wrong username. Clearly, Emacs doesn't access my config file. When I try to ssh or scp directly to the machine, things work fine. What do I need to update?

  Read the article

• WIFI connection interfering with Windows Server 2003 Active Directory domain. (How to debug?)

  - by Vinko Vrsalovic

  RELATED: This question has led me to ask this one. I had to change our unnamed crappy ADSL router to a crappy Comtrend CT-5361 WiFi router, now every WiFi connection to the domain doesn't work correctly: Joining the domain is impossible (see related question) Logging into the domain takes ages Authentication usually fails Question: How to debug this and pinpoint the exact problem? I have no enough knowledge on either WiFi networks or on Active Directory to know which connections are made at which stages nor how to check what's happening at the wireless level to compare what should happen to what is happening. I'm looking for resources to learn what should be happening and tools to detect what is actually happening (I expect a sniffer should be enough, but if there are better, more specialized tools, that'd be great).

  Read the article

• Get SMTP to work

  - by user664408

  We upgraded to exchange 2010 and this broke an old java based script that connected and sent out e-mail messages. Many hours later we still can't get exchange to work like exchange 2003 did. That hope was abandoned and we decided to create a linux postfix server to forward the e-mail from the old system to exchange, eliminating exchange on the java side. This still doesn't work with similar errors. I need help figuring out what is different between exchange 2003 with SSL and authentication and the new servers, both linux and exchange 2010. My guess is both have TLS and for some reason the java code won't revert back to the older version of SSL, instead it just fails. Can someone help me either setup exchange 2010 to work like 2003 used to, OR to setup postfix to mandate it use SSL 2.0 instead of TLS? unfortunately no one knows anything about the Java code and they can't decompile it apparently. Any help is appreciated.

  Read the article

• Windows Media Player 11 fails to authenticate with proxy (ISA)

  - by Ed Manet

  We have some users who need to use a 3rd party site that embeds Windows Media Player streaming video into a web page. Our users go through an ISA proxy server to connect to the Internet. The browser has no problems accessing the site through the proxy. When Media Player loads, we get prompted for network credentials, but the authentication fails. If we set up Internet Explorer 8 to not use the proxy, Media Player has no problem. Media Player is configured to use the RTSP/TCP and HTTP protocols, but not the RTSP/UDP protocol. Is this necessary? Is there a registry key I can use to enable it? Is this more of a proxy server issue? The proxy guy says it's a desktop issue.

  Read the article

• Hyper-V Manager - Host Access During a Catastrophe

  - by LonnieBest

  How can I ensure that I can always have Hyper-V Manager access to a Hyper-V server, even in the event that the Active Directory Server is down (in a domain-login environment)? Background: The one that came before me, set up the company's servers as virtual machines on top of a host running Hyper-V Server 6.1 (7601) Service Pack 1. For managing Hyper-V, he installed Window 7 onto a virtual machine (run on the same host) with Hyper-V Manager installed. When the (virtual) Active Directory server (run on this same host) is rebooted, during that reboot, I'm unable to RDP into the Windows 7 virtual machine, and I'm therefore unable to access Hyper-V Manager when the Active Directory server is down. I suspect I can't login because I can't authenticate with the Active Directory Server. I'm going to install Hyper-V Manger onto some addition manager's workstations, but how can I ensure they'll have access in a catastrophe where Active Directory authentication isn't possible?

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >