Search Results

Search found 9816 results on 393 pages for 'named conf'.

Page 285/393 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

  • PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

    - by athspk
    I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

    Read the article

  • FTP through HAProxy

    - by Menda
    I have a machine, which is the Host and has HAProxy installed in it and working. Then I have a Guest KVM virtual machine running inside the Host with an IP 192.168.122.152. I installed an FTP server in the Guest machine with VSFTPD. From the Host, if I try the command $ ftp -p 192.168.122.152, works perfectly and I can connect to the Guest FTP. I need to remark that this FTP is configured as passive, but both passive and active connections are working from the Host. This is an extract of part of /etc/vsftpd.conf in the Guest: # Passive mode connect_from_port_20=NO tcp_wrappers=YES listen_address=192.168.122.152 pasv_enable=YES pasv_promiscuous=NO port_enable=YES port_promiscuous=NO pasv_max_port=10000 pasv_min_port=10250 Now it's time to make it accessible from outside, so I configure /etc/haproxy/haproxy.cfg like this: listen FTP_Default *:21 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 listen FTP_Range *:10000-10250 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 But if I try to connect from other machine in internet $ ftp -p $PUBLICIP, it only responds: Connected to <PUBLICIP>, but it doesn't ask for the login and password. Something in the HAProxy config must be wrong, because it's the only point where it fails. By the way, I tried to adapt my configuration to this one in this blog. Thanks.

    Read the article

  • SSTP client disconnects shortly after successfully connected to VPN

    - by Eran Betzalel
    I'm successfully authenticating and connecting to a SSTP VPN (on windows 2008) from my windows 7 machine, but for some reason, the connection is disconnected about a 1-2 seconds after it's established. I've done the following: Defined a SSTP VPN on my windows server 2008. Defined the same machine as CA. Issued the needed certificates and published them on the client. I'm currently testing this VPN inside my LAN so all the needed ports are opened. Here are the event log entries when trying to connect: Error Log (Client): The user HOME\User dialed a connection named Home VPN which has terminated. The reason code returned on termination is 829. Error Log (Server-VPN): The user HOME\User connected on port VPN0-0 on 7/27/2012 at 1:57 AM and disconnected on 7/27/2012 at 1:57 AM. The user was active for 0 minutes 0 seconds. 312 bytes were sent and 4528 bytes were received. The reason for disconnecting was user request. What would be the issue? How can I resolve or debug it? UPDATE: I've found an event log (Log=System, Source=RasSstp) message on the windows 7 machine that tries to connect to the VPN: The SSTP-based VPN connection to the remote access server was terminated because of a security check failure. Security settings on the remote access server do not match settings on this computer. Contact the system administrator of the remote access server and relay the following information: SHA1 Certificate Hash: 065D681...520375552F SHA256 Certificate Hash: 18DED363...EEEE28CFD00

    Read the article

  • vsftpd 500 OOPS: priv_sock_get_int

    - by user1613878
    I have a problem with vsftpd that replies "500 OOPS: priv_sock_get_int" when i do command "ls". following is a snip of ftp client console running on osx. And I'm using test account that has home directory on the ftp server, not virtual account. Connected to 192.0.0.20. 220 satellite Name (192.0.0.20:john): test_account 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 500 OOPS: priv_sock_get_int 421 Service not available, remote server has closed connection. and my vsftpd.conf local_enable=YES write_enable=YES #local_umask=022 local_umask=002 #anon_upload_enable=YES #anon_mkdir_write_enable=YES #dirmessage_enable=YES #xferlog_enable=YES connect_from_port_20=YES #chown_uploads=YES #chown_username=whoever #xferlog_file=/var/log/vsftpd.log #xferlog_std_format=YES #idle_session_timeout=600 #data_connection_timeout=120 #nopriv_user=test #async_abor_enable=YES #ascii_upload_enable=YES #ascii_download_enable=YES ftpd_banner=welcome #deny_email_enable=YES #banned_email_file=/etc/vsftpd.banned_emails #chroot_local_user=YES #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list #ls_recurse_enable=YES listen=YES #listen_ipv6=YES #ssl_enable=NO pasv_enable=YES pasv_max_port=12500 pasv_min_port=12000 port_enable=YES pasv_address=192.0.0.20 pasv_promiscuous=YES port_promiscuous=YES file_open_mode=0666

    Read the article

  • cpan won't configure correctly on centos6, can't connect to internet

    - by dan
    I have Centos 6 setup and have installed perl-CPAN. When I run cpan it takes me through the setup and ends by telling me it can't connect to the internet and to enter a mirror. I enter a mirror, but it still can't install the package. What am I doing wrong? If you're accessing the net via proxies, you can specify them in the CPAN configuration or via environment variables. The variable in the $CPAN::Config takes precedence. <ftp_proxy> Your ftp_proxy? [] <http_proxy> Your http_proxy? [] <no_proxy> Your no_proxy? [] CPAN needs access to at least one CPAN mirror. As you did not allow me to connect to the internet you need to supply a valid CPAN URL now. Please enter the URL of your CPAN mirror CPAN needs access to at least one CPAN mirror. As you did not allow me to connect to the internet you need to supply a valid CPAN URL now. Please enter the URL of your CPAN mirror mirror.cc.columbia.edu::cpan Configuration does not allow connecting to the internet. Current set of CPAN URLs: mirror.cc.columbia.edu::cpan Enter another URL or RETURN to quit: [] New urllist mirror.cc.columbia.edu::cpan Please remember to call 'o conf commit' to make the config permanent! cpan shell -- CPAN exploration and modules installation (v1.9402) Enter 'h' for help. cpan[1]> install File::Stat CPAN: Storable loaded ok (v2.20) LWP not available Warning: no success downloading '/root/.cpan/sources/authors/01mailrc.txt.gz.tmp918'. Giving up on it. at /usr/share/perl5/CPAN/Index.pm line 225 ^CCaught SIGINT, trying to continue Warning: Cannot install File::Stat, don't know what it is. Try the command i /File::Stat/ to find objects with matching identifiers. cpan[2]>

    Read the article

  • setsockopt EOPNOTSUPP (Operation not supported)

    - by brant
    When I strace my MySQL process, I keep finding the same error over and over: setsockopt(240, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0x87ab944, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x87ab940, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x87ab260, FUTEX_WAKE_PRIVATE, 1) = 1 select(13, [10 12], NULL, NULL, NULL) = 1 (in [12]) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, path="\246\32629iE"...}, [2]) = 803 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(803, {sa_family=AF_FILE, path="/var/lib/mysql\1"...}, [28]) = 0 fcntl64(803, F_SETFL, O_RDONLY) = 0 fcntl64(803, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(803, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(803, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0x87ab944, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x87ab940, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x87ab260, FUTEX_WAKE_PRIVATE, 1) = 1 select(13, [10 12], NULL, NULL, NULL) = 1 (in [12]) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, path="\246\32629iE"...}, [2]) = 240 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(240, {sa_family=AF_FILE, path="/var/lib/mysql\1"...}, [28]) = 0 fcntl64(240, F_SETFL, O_RDONLY) = 0 fcntl64(240, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(240, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(240, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) When I look for running mysql processes I don't see anything out of the ordinary. I figured it might be someplace in my code, so I modified .htaccess to spit out a 502 error to prevent it from loading anything. The error still shows up, just less frequently. There have been quite a few threads that talk about this error, but no real answer as to how to solve it. my.conf, as per request: [mysqld] #skip-networking #log-slow-queries #safe-show-database #local-infile = 0 log-slow-queries = /var/log/mysql-slow.log max_connections = 200 query_cache_limit = 128643200 key_buffer_size = 1200144000 low_priority_updates = 1 concurrent_insert = 2 thread_cache_size = 7 query_cache_size = 662144000 table_cache = 1600 table_definition_cache = 1024 long_query_time = 2.5 open_files_limit = 2647 max_connect_errors=999999999

    Read the article

  • How can I solve http_port 3129 intercept with squid?

    - by wmoreno3
    My system: uname -a FreeBSD server.local.jmorenov.com.co 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 pkg info | grep squid squid-3.2.7 HTTP Caching Proxy I have this configuration in squid.conf: http_port 3128 accel vhost allow-direct # OK http_port 3129 intercept # Does not work icp_port 0 When I tried with: http_port 3129 intercept By switch line on ipnat.rules. In access log appears: 2013/01/09 00:46:03 kid1| IPF (IPFilter) NAT open failed: (13) Permission denied 2013/01/09 00:46:03 kid1| BUG #3329: Orphan Comm::Connection: local=127.0.0.1:3129 remote=192.168.1.129:51595 FD 24 flags=33 2013/01/09 00:46:03 kid1| NOTE: 1 Orphans since last started. /var/log/squid/cache.log 2013/02/08 09:02:33 kid1| Squid plugin modules loaded: 0 2013/02/08 09:02:33 kid1| Accepting reverse-proxy HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 33 flags=9 2013/02/08 09:02:33 kid1| Accepting NAT intercepted HTTP Socket connections at local=127.0.0.1:3129 remote=[::] FD 34 flags=41 My /etc/ipnat.rules: root@server:/root # cat /etc/ipnat.rules # em0 = External NIC # bge0 = Internal NIC map em0 0/0 -> 0/32 proxy port ftp ftp/tcp map em0 0/0 -> 0/32 portmap tcp/udp auto map em0 0/0 -> 0/32 # Redirect direct web traffic to local web server. rdr em0 192.168.0.3/32 port 80 -> 127.0.0.1 port 80 tcp rdr bge0 192.168.1.3/32 port 80 -> 127.0.0.1 port 80 tcp # Redirect everything else to squid on port 3128 or 3129 intercept rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp #rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp #rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp With 3128 is OK, but with 3129, Does not work, when switch in ipnat.rules.

    Read the article

  • Unable to install SQL 2008 on Windows 7

    - by Axel
    SQL 2008 install hangs on Windows 7 The story: Trying to install SQL2008 on Windows 7 hangs on SqlEngineDBStartconfigAction_install_configrc_Cpu32. What I Tried: Uninstall hangs on validation Manual uninstall using msiinv.exe and msiexec /x works Added SQL service accounts to local admins no help Turn of UAC no help Last lines in setup log: 2010-04-01 16:18:05 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle' 2010-04-01 16:18:05 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' to be created 2010-04-01 16:18:07 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' or sql process handle to be signaled 2010-04-01 16:18:07 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents' 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize script 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize default connection string 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NotSpecified 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NamedPipes 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup 2010-04-01 16:18:53 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect' 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL.... 2010-04-01 16:18:53 Slp: Sco: Attempting to connect script 2010-04-01 16:18:53 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup And now comes the fun part: When I open conf mgr I can see the service running, I enabled named pipes and TCP/IP, restarted the service I'm able to connect to the server using an OLE DB connection but not with the Native Client. And what I find suspicious is the following error in my app log: .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\Tools\VDT\DataProjects.dll . Error code = 0x8007000b In MS connect this is reported as a bug but MS is unable to reproduce the problem altough when you search the fora I'm not the only one with this problem. So any help is appreciated.

    Read the article

  • Varnish 3.0.2 and ISPConfig 3.0.4

    - by Warren Bullock III
    I followed the tutorial The Perfect Server - Ubuntu 11.10 [ISPConfig 3] here. I'm running an Ubuntu 11.04 (Natty Narwhal) server with 1024 RAM on Rackspace. I've gone through and updated to ISPConfig 3.0.4. Everything has been working great up to now when I decided to try and install Varnish. Initially I did an install of Varnish by issuing: apt-get update apt-get upgrade apt-get install varnish Apparently the version that was installed was Varnish 2.x so I went back and added the repositories for packages provided by varnish-cache.org curl http://repo.varnish-cache.org/debian/GPG-key.txt | apt-key add - echo "deb http://repo.varnish-cache.org/ubuntu/ lucid varnish-3.0" >> /etc/apt/sources.list apt-get update apt-get install varnish This updated my version of Varnish to 3.0.2 I then proceeded to make the following changes: vim /etc/default/varnish change DAEMON_OPTS to port 80: vim /etc/apache2/ports.conf NameVirtualHost *:8000 Listen 8000 vim /etc/apache2/sites-available/default <VirtualHost *:8000> vim /etc/apache2/sites-available/ispconfig.vhost Listen 8080 NameVirtualHost *:8080 <VirtualHost _default_:8080> I then proceeded to set my other vhosts to use 8000 (the apache2 port) so with all this set I reset both Apache2 and Varnish to test. I used Firebug in Firefox 11.0 The output from what I see doesn't seem to indicate that Varnish is working completely correct: First of all I see: X-Varnish 1644834493 but I've heard that unless you have two timestamps side by side than it's probably not working correctly so for example I was thinking I might see something like: X-Varnish 1644834493 1644837493 Also if I noticed this in the output which seems to be inconstant: X-Drupal-Cache MISS There are times when it will say HIT as well.... So the question here that I have is I think Varnish is partially working, however, why don't I see two timestamps on X-Varnish like I'm thinking I should and does the output of the screenshot I have look correct? If Varnish isn't working can someone tell me what I might being doing wrong? Thanks in advance.

    Read the article

  • Error when trying to start Apache after installing SSL cert

    - by chris
    I am trying to install an SSL certificate, and I get the following errors: AH02241: Init: Unable to read server certificate from file /path/my.crt SSL Library Error: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag SSL Library Error: error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error (Type=X509) AH02312: Fatal error initialising mod_ssl, exiting. Here's the process I followed: I generated my private key with: openssl genrsa -out my.key 2048 I created the CSR with: openssl req -new -key my.key -out my.csr I provided the CSR to our IT department, and they returned a crt - it starts with -----BEGIN CERTIFICATE----- My ssl.conf has (my.example.com matches the Common name used during the generation of the CSR): <VirtualHost my.example.com:443> SSLEngine On ServerName my.example.com SSLCertificateFile /path/my.crt SSLCertificateKeyFile /path/my.key </VirtualHost> I do not have SSLCertificateChainFile or SSLCACertificate file set. The private key starts with ----BEGIN RSA PRIVATE KEY----- The csr starts with -----BEGIN CERTIFICATE REQUEST----- I have verified that both: openssl rsa -noout -modulus -in my.key openssl req -noout -modulus -in my.csr produce the same output. I cannot figure out how to verify the crt - trying both x509 and rsa produce an error. Should this process have worked? Can I verify that my.crt matches the key somehow?

    Read the article

  • Invalid keystore format with SSL in Tomcat 6

    - by strauberry
    I'm trying to setup SSL in my local Tomcat 6 installation. For this, I followed the official How-To doing the following: $JAVA_HOME/bin/keytool -genkey -v -keyalg RSA -alias tomcat -keypass changeit -storepass changeit $JAVA_HOME/bin/keytool -export -alias tomcat -storepass changeit -file /root/server.crt Then changing the $CATALINA_BASE/conf/server.xml, in-commenting this: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" keystoreFile="/root/.keystore" keystorePass="changeit" /> After starting Tomcat, I get this Exception: INFO: Initializing Coyote HTTP/1.1 on http-8080 30.06.2011 10:15:24 org.apache.tomcat.util.net.jsse.JSSESocketFactory getStore SCHWERWIEGEND: Failed to load keystore type JKS with path /root/.keystore due to Invalid keystore format java.io.IOException: Invalid keystore format at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633) at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38) at java.security.KeyStore.load(KeyStore.java:1185) When I look into the keystore with keytool -list I get root@host:~# $JAVA_HOME/bin/keytool -list Enter key store password: changeit Key store type: gkr Key store provider: GNU-CRYPTO Key store contains 1 entry(ies) Alias name: tomcat Creation timestamp: Donnerstag, 30. Juni 2011 - 10:13:40 MESZ Entry type: key-entry Certificate fingerprint (MD5): 6A:B9:...C:89:1C Obviously, the keystore types are different. How can I change the type and will this fix my problem? Thank you!

    Read the article

  • How do I connect two computers with a LAN cabel?

    - by John
    I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

    Read the article

  • Yum update not working on CentOS 6.2 minimal install

    - by Owen
    Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

    Read the article

  • VMWare ESXi, change the default path for a VM

    - by glenatron
    For some reason VMWare ESXi has decided that one of my VMs is on a completely different path to the path it is actually on. So my VM is on /vmfs/volumes/long-guid-here/my-vm-name but when I try to open it I get the message "File < unspecified filename was not found." Which is not really surprising as unspecified filenames are quite difficult to locate. I thought it was just the swap file, which was down in the .vmx file as /vmfs/volumes/long-guid-here/old-vm-name/old-vm-name.vmsd but when I changed that in the vmx it made no difference. What I can't figure out is where VMWare is getting the old-vm-name from- when I look in the "Settings" pane it believes the working file location to be "[datastore-name] old-vm-name\" and I can't find anywhere to change it. Now the files themselves are all named for old-vm-name - so the directory is /my-vm-name/old-vm-name.vmx and so on. Is this the cause of my problems or is there some arcane configuration option elsewhere around the VMWare machine that I need to be tinkering with?

    Read the article

  • SQL Server 2008 Cluster Installation - First network name always fails

    - by boflynn
    I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

    Read the article

  • Squid 2.7 Stable 8 on Windows 2008

    - by Sadish
    Hi all, I have a Windows 2008 SP2 Active Directory Domain, which has clients of Vista, Win 2000 XP and Windows 7 as members. I installed Squid 2.7 Stable 8 on Windows 2008 SP2 trying to configure NTLM based authentication when surfing Internet. Basically have defined 2 groups for internet allow and deny based on authorization Internet access is allowed. But after trying for over 3 weeks, seems that the authentication does not happen. The browser keeps on asking for user name & password. I would like to know if there is any solution for this. I’m totally frustrated and unable to move forward. My configuration as below from the modifying the default squid.conf Line 292 auth_param ntlm program c:/squid/libexec/mswin_ntlm_auth.exe auth_param ntlm children 5 Line 626 acl localnet proxy_auth REQUIRED src 10.0.0.1/255 acl InetAllow external win_domain_group InternetUsers acl InetDeny external win_domain_group InternetDenyGroup http_access allow InetAllow http_access deny InetDeny Comment any "acl localnet src" Line 294 external_acl_type win_domain_group ttl=120 %LOGIN c:/squid/libexec/mswin_check_lm_group.exe –G My Windows 2008 server is running on 192.168.0.203 and clients are of subnet 10.0.0.x for which I need authentication. Pls help !!!

    Read the article

  • How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

    - by Daryl Spitzer
    I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

    Read the article

  • How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

    - by Daryl Spitzer
    I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

    Read the article

  • Problems with repositories on CentOS 3.9

    - by rodnower
    Hello, I have CentOS 3.9 for i386. When I try to instal some thing with yum, i.e: yum install firefox or yum install firefox* or yum list firefox and so on, I get: +++++++++++++++++++ yum info firefox Gathering header information file(s) from server(s) Server: CentOS-3 - Addons Server: CentOS-3 - Base Server: CentOS-3 - Extras Server: CentOS-3 - Updates Server: Jason's Utter Ramblings Repo Finding updated packages Downloading needed headers Looking in Available Packages: Looking in Installed Packages: +++++++++++++++++++ Some time ago I had CentOS 5, and I had the similar problem (exept of firefox all other packages were not installed) and I spent very much time to find different repositories and so on. Now I have CentOS 3, and there is nothing I can install with yum. This is yum.conf content: +++++++++++++++++++ [main] cachedir=/var/cache/yum debuglevel=2 logfile=/var/log/yum.log pkgpolicy=newest distroverpkg=redhat-release installonlypkgs=kernel kernel-smp kernel-hugemem kernel-enterprise kernel-debug kernel-unsupported kernel-smp-unsupported kernel-hugemem-unsupported tolerant=1 exactarch=1 [utterramblings] name=Jason's Utter Ramblings Repo baseurl=http://www.jasonlitka.com/media/EL4/i386/ [base] name=CentOS-$releasever - Base baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ #released updates [update] name=CentOS-$releasever - Updates baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/ #additional packages that may be useful [extras] name=CentOS-$releasever - Extras baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ #[centosplus] #name=CentOS-$releasever - Plus #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ #[testing] #name=CentOS-$releasever - Testing #baseurl=http://mirror.centos.org/centos/$releasever/testing/$basearch/ #[fasttrack] #name=CentOS-$releasever - Fasttrack #baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/ +++++++++++++++++++ The file is too long, so I littely edited it. So my question is: is there some "normal" one repository that have all basic thing like firefox and so that I will insert to this file and all will work fine? Thank you very much for ahead.

    Read the article

  • NetApp FAS 2040 LDAP Win2k8R2

    - by it_stuck
    I am trying to get my FAS2040 to action user lookups using LDAP, below is the filer configuration options: filer> options ldap ldap.ADdomain dc1.colour.domain.local ldap.base OU=Users,OU=something1,OU=something2,OU=darkside,DC=colour,DC=domain,DC=local ldap.base.group ldap.base.netgroup ldap.base.passwd ldap.enable on ldap.minimum_bind_level anonymous ldap.name domain-admin-account ldap.nssmap.attribute.gecos gecos ldap.nssmap.attribute.gidNumber gidNumber ldap.nssmap.attribute.groupname cn ldap.nssmap.attribute.homeDirectory homeDirectory ldap.nssmap.attribute.loginShell loginShell ldap.nssmap.attribute.memberNisNetgroup memberNisNetgroup ldap.nssmap.attribute.memberUid memberUid ldap.nssmap.attribute.netgroupname cn ldap.nssmap.attribute.nisNetgroupTriple nisNetgroupTriple ldap.nssmap.attribute.uid uid ldap.nssmap.attribute.uidNumber uidNumber ldap.nssmap.attribute.userPassword userPassword ldap.nssmap.objectClass.nisNetgroup nisNetgroup ldap.nssmap.objectClass.posixAccount posixAccount ldap.nssmap.objectClass.posixGroup posixGroup ldap.passwd ****** ldap.port 389 ldap.servers ldap.servers.preferred ldap.ssl.enable off ldap.timeout 20 ldap.usermap.attribute.unixaccount unixaccount ldap.usermap.attribute.windowsaccount sAMAccountName ldap.usermap.base ldap.usermap.enable on output of nsswitch.conf: hosts: files dns passwd: ldap files netgroup: ldap files group: ldap files shadow: files nis Error Message(s): [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Starting AD LDAP server address discovery for dc1.colour.domain.LOCAL. [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using DNS site query (site). [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using generic DNS query. Could not get passwd entry for name = <random user> the filer can ping the FQDN of dc1 the filer can ping the IP of dc1 the filer cannot ping "dc1" I'm not sure where I'm going wrong, so any pointers would be great.

    Read the article

  • DD-WRT: DNSMasq expand-hosts not working

    - by Craig Walker
    I have a Linksys router running DD-WRT (Firmware: DD-WRT v24-sp2 (09/08/09) mini). I have it successfully resolving the DNS names for my DHCP-assigned systems, but only when I fully-qualify those domains. This is despite using the "expand-hosts" DNSMasq additional option, which is supposed to activate this precise function. Here's my dnsmasq.conf: interface=br0 resolv-file=/tmp/resolv.dnsmasq domain=example.com dhcp-leasefile=/tmp/dnsmasq.leases dhcp-lease-max=51 dhcp-option=lan,3,10.77.0.5 dhcp-authoritative dhcp-range=lan,10.77.0.100,10.77.0.149,255.255.0.0,1440m dhcp-host=00:1A:A0:1D:82:5A,astatichostname,10.77.1.40,infinite expand-hosts (FYI: example.com and astatichostname are placeholders for the real-deal names I use. My network uses 10.77.0.0/16; my router is on 10.77.0.5.) Results: > nslookup astatichostname 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 ** server can't find astatichostname: NXDOMAIN > nslookup astatichostname.example.com 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 Name: astatichostname.example.com Address: 10.77.1.40 Is there something else that could be tripping up expand-host in DNSMasq?

    Read the article

  • Invalid configuration `noarch-redhat-linux-gnu': machine `noarch-redhat' not recognized

    - by Spacedust
    When I try to build rpm from src rpm (Apache 2.4.1) I got this error: rpmbuild -tb httpd-2.4.1.tar.bz2 --ba httpd.spec + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=noarch-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-layout=RPM --libdir=/usr/lib64 --sysconfdir=/etc/httpd/conf --includedir=/usr/include/httpd --libexecdir=/usr/lib64/httpd/modules --datadir=/var/www --with-installbuilddir=/usr/lib64/httpd/build --enable-mpms-shared=all --with-apr=/usr --with-apr-util=/usr --enable-suexec --with-suexec --with-suexec-caller=apache --with-suexec-docroot=/var/www --with-suexec-logfile=/var/log/httpd/suexec.log --with-suexec-bin=/usr/sbin/suexec --with-suexec-uidmin=500 --with-suexec-gidmin=100 --enable-pie --with-pcre --enable-mods-shared=all --enable-ssl --with-ssl --enable-socache-dc --enable-bucketeer --enable-case-filter --enable-case-filter-in --disable-imagemap checking for chosen layout... RPM checking for working mkdir -p... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking build system type... x86_64-redhat-linux-gnu checking host system type... x86_64-redhat-linux-gnu checking target system type... Invalid configuration `noarch-redhat-linux-gnu': machine `noarch-redhat' not recognized configure: error: /bin/sh build/config.sub noarch-redhat-linux-gnu failed blad: Bledny stan wyjscia z /var/tmp/rpm-tmp.48153 (%build) Bledy budowania RPM-a: Bledny stan wyjscia z /var/tmp/rpm-tmp.48153 (%build)

    Read the article

  • uWSGI log file...permission denied to read file

    - by bkev
    I have a server running Django/Nginx/uWSGI with uWSGI in emperor mode, and the error log for it (the vassal-level error log, not the emperor-level log) has a continual permissions error every time it spawns a new worker, like so: Tue Jun 26 19:34:55 2012 - Respawned uWSGI worker 2 (new pid: 9334) Error opening file for reading: Permission denied Problem is, I don't know what file it's having trouble opening; it's not the log file, obviously, since I'm looking at it and it's writing to that without issue. Any way to find out? I'm running the apt-get version of uWSGI 1.0.3-debian through Upstart on Ubuntu 12.04. The site is working successfully, aside from what seems like a memory leak...hence my looking at the log file. My Upstart conf file description "uWSGI" start on runlevel [2345] stop on runlevel [06] respawn env UWSGI=/usr/bin/uwsgi env LOGTO=/var/log/uwsgi/emperor.log exec $UWSGI \ --master \ --emperor /etc/uwsgi/vassals \ --die-on-term \ --auto-procname \ --no-orphans \ --logto $LOGTO \ --logdate My Vassal ini file: [uwsgi] # Variables base = /srv/env/mysiteenv # Generic Config uid = uwsgi gid = uwsgi socket = 127.0.0.1:5050 master = true processes = 2 reload-on-as = 128 harakiri = 60 harakiri-verbose = true auto-procname = true plugins = http,python cache = 2000 home = %(base) pythonpath = %(base)/mysite module = wsgi logto = /srv/log/mysite/uwsgi_error.log logdate = true

    Read the article

  • Why am I getting Network error: 403 Forbidden in firebug for files I am not trying to access?

    - by moomoochoo
    QUESTIONs I'd like to know why I am getting Network error: 403 Forbidden in firebug for files that I am not trying to access? is it likely to cause any serious problems on the webserver? how to fix it. Why is my browser trying to access those files in the error message? DETAILS I’m using wampserver 2.2 to access a folder via the browser. The browser is on the same computer as the server. The computer is running windows 7 ultimate. When I view a web folder via my browser hXXp://localhost/folder I can see the folder contents ok but in firebug I get Network error: 403 Forbidden I’m not deliberately trying to access those files in the error msgs. You will notice they are in a completely different folder to the one I am looking at. I check the apache_error.log and see [Wed Sep 26 00:05:10 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: hxxp://localhost/folder/ Wampserver 2.2 is installed on D drive. I took a look at the httpd.conf file but I couldn't find any references to c: When I look in Apache’s access.log I see 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/blank.gif HTTP/1.1" 403 217 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/back.gif HTTP/1.1" 403 216 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/text.gif HTTP/1.1" 403 216 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/unknown.gif HTTP/1.1" 403 219 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/folder.gif HTTP/1.1" 403 218 CONFIGURATION Wampserver 2.2 installed on Drive D Apache 2.2.22 PHP 5.4.3 MySQL 5.5.24 Firebug 1.10.3 Firefox 15.0.1

    Read the article

  • Connectivity with SQL Server Express 2008 r2 and SQL Server 2000 on same machine

    - by Jim R
    At first glance this may same a duplicate of Installing both SQL Server 2000 and SQL Server 2008 on the same machine, but it is not. I have SQL Server 2000 and SQL Server 2008 R2 installed on the same machine and working fine. My problem lies with connecting to the 2008 R2 server from a remote machine. My connectivity needs to be TCP. The legacy installation or SQL 2000 uses the default port of 1433. The named instance is by default configured to use 'Shared Memory' and is working fine. When I configured the 2008 R2 server to use 1433 (I did not think that thru) the service refused to start becasue 1433 was already in use by the legacy SQL 2000 default instance. Doh! What I want to do is have both servers available simultaneously via TCP. both servers need not be on the same port, put if I cannot run them on the same port, then how do I configure the clients? Is there not some kind of proxy available that can monitor the 1433 port and pass the request thru to the correct SQL instance by name? Is this capability built into SQL server already? Thanks, Jim

    Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >