Search Results

Search found 11152 results on 447 pages for 'online music'.

Page 286/447 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• Direct Access on Server 2012

  - by francisswest

  Scenario: Windows Server 2012 with the Remote Access role installed. IP set to static, registered DNS. 3 domain controllers, all running Server 2003 (I suspect this may be the issue) Done so far: DNS registered, firewall turned off after IPsec was applied. Able to ping all 3 DC's with no issues Problem: Going through the DA wizard generates this error. I am logged in as a domain admin, verified that I can ping the DC, verified IPsec allows me to contact it. Since this version hasnt been readily deployed yet, there isnt much help available online from what I can find. Any assistance ayone could provide would be greatly appreciated. I am still new to the server world as far as things are considered. I would fit, user wise, between Superuser.com and serverfault.com (junior admin) Thanks to anyone who may be able to assist!

  Read the article

• Block (or only allow certian) incoming IP addresses on Verizon FIOS Actiontec Router

  - by jmlumpkin

  I opened a few ports to the outside of my home network so I can get into a few of my machines from outside. When checking some logs, I noticed that I was getting scanned on some ports from various other countries. I already moved my port forward to a non-standard port. I would like to be able to block specific IP's (or even subnets) from my Verizon FIOS router. There is a little bit of documentation online, but I can't find anything specific on how to do this. To start, I just want to block a specific IP. But if it is not to hard, I would also like to know how to possibly block a range of IPs. And with the inverse of this - is there a way to allow only certain IPs or range?

  Read the article

• How do I configure hardware raid in a Poweredge 2850?

  - by Eric Fossum

  I just bought a Dell Poweredge 2850 from Craigslist and for the most part I'm happy with it's $300 price-tag, but I cannot figure out where to configure the embedded hardware raid... I've seen online you should hit <CTRL-M>, but while booting my box never says that. I have <CTRL-A> (I think) for an LSI Logic config, but that seems to just program SCSI and verify drives on my SCSI-A and SCSI-B. Anyone have a clue where this RAID config is?

  Read the article

• how can I force automatic filling to be enabled on webpages?

  - by thepaulpage

  I'm using the Chrome Browser. I enjoy the "automatic filling" that it uses to fill in things like my address when I'm shopping online. Sometimes I get a message that says: "This webpage has disabled automatic filling for this form" Is there a way that I can tell Chrome to ignore what the webpage wants and just give me what I want? I'm not talking about passwords, I'm talking about Chrome's automatic filling in of things like my email address, zip code, etc. For Example: https://www.kansas.gov/ump/register/account?

  Read the article

• How to edit the list of files to download in a .torrent file?

  - by Forbidden Overseer

  I have a torrent that contains many files in it, but I don't want to download all of them because I need only few files among them. I am not downloading from a torrent client, but I am actually using put.io service that converts torrents into direct downloads for me. I want to edit the .torrent file (or magnet link) in such a way that I get only those files which I need from the torrent. I tried by editing with text editors, but I am getting some crazy hash errors when I did that. I have seen people editing trackers in a torrent file (using online editors and other editors), but none of them edited the list of files in the torrent file. So, the question is: How to edit a .torrent file (and save it back as another .torrent file) such that when you run that torrent file, it only downloads only those files you need?

  Read the article

• HP Wireless Printer not working

  - by Omri Spector

  I have installed an HP DeskJet 4620 driver on a win 7 machine. All works perfectly for several days, and than printing is not longer possible. Instead I get the message: "Unable to communicate with printer". This happened on every Win 7 PC I tried, and none of the HP/MS sites contain any relevant info... (Posting this so that the answer appears online, as I did solve it after much work) Solution: It appears that HP installation puts a unique "port" called "HP Network re-discovery". It stops working after some time (possibly after the first time the printer/pc enter sleep mode). BUT, the standard MS TCP port works just fine. So: Go to "Printers" Right click Printer Click "Printer properties" and then "Printer" or "Fax" (for both - do all this twice) Click "Add Port..." Select "Standard TCP Port" Fill in details Move printer to use the new port by un-checking the old one and checking the new one Happy printing.

  Read the article

• .htaccess redirect, from old dirty URL to a clean new URL with parameters

  - by JustAnil

  I have the following 2 links, I'm not great with .htaccess rules yet. Old URL: http://www.mywebsite.org.uk/donate/donate.php?charity_id=885&project_id=18111 New URL: http://new.mywebsite.org.uk/donation/to/885/18111 I want all the traffic coming from the old URL to the new url (including the parameters charity_id & project_id). I'm trying to learn .htaccess rules, but finding the tutorials online to be kinda vague. I'd really like a simple explanation on the .htaccess rules. (Give a man a fish, feed him for a day, teach a man to fish, feed him for a lifetime). The correct answer will be the answer with a simple and useful explanation (along with the rules if possible!).

  Read the article

• PHP and MySQL related Problem

  - by Tareq

  Hi friends, I have a local LAN to my office. Recently I designed a New Software system using PHP, MySQL for my office. My boss wants to see the reports from online. My problem is, my network connection is often failed to my office. But I have to input all time. So, now I want to use two instances of my software. One will be using the LAN and one will be uploaded to my server. My question is, how can I easily keep the both databases up-to-date always? Please help me with this issue. If you want more info please feel free to ask me.

  Read the article

• Is there a software that can remap the keys for a speficic keyboard?

  - by Vilx-

  There are several keyboards attached to my computer. I'd like to remap the keys on ONE of them, but keep the rest as they were. Is there a software that does this? As for the "why" - I have this idea that I'd like to have a "multimedia keypad" which is separate from my main keyboard, but I could not find any online. So I think that I could take a typical USB numpad (they cost like 5$), and remap the keys on one of them. Add appropriate stickers, and I'm all seat, cheaply. I know that it's theoretically possible, but before I get my hands dirty and write my own software, I'd like to see if there's maybe an existing one out there. Oh, yes, I'm running Windows 7.

  Read the article

• Why is Windows Update telling me to install Internet Explorer 10 even though it is already installed?

  - by gparyani

  I have a Windows 7 laptop. For some reason, Windows Update keeps telling me to install Internet Explorer 10 for Windows 7 even though it is already installed (downloaded from Microsoft website). Whenever I try and install it from Windows Update in order to get rid of it, I receive error 9C48. What is the problem and how do I solve it? (I've noticed several entries for similar problems online, but those are all for Internet Explorer 9). As I said in the comments, my system keeps trying to install the same update when it is shutting down, only failing with the same error. It is hogging my shut down button and wasting time during shutdown. Update: I just went and installed Internet Explorer 11 from the Windows website. However, Windows Update continues to offer me Internet Explorer 10. How can I tell it that the update is in fact installed so that it instead starts offering me updates?

  Read the article

• Ubuntu 10.04/CURL: How do I fix/update the CA Bundle?

  - by Nick

  I recently upgraded our server from 8.04 to 10.04, and all the software along with it. From what I've found online, it seems that the new version of CURL doesn't include a CA bundle, and, as a result, fails to verify that the certificate of the server you're connecting to is signed by a valid authority. The actual error is: CURL error: SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE: certificate verify failed Some palces I've found suggest manually specifying a CA file or disabling the check altogether by setting an option when you call CURL, but I'd much rather fix the issue globally, rather than having to modify each application's CURL calls. Is there a way to fix CURL's CA problem server-wide so that all of the existing application code works as is without needing to be modified?

  Read the article

• can I create disk partition for dual-boot Ubuntu on Windows 7 machine without Windows reinstall?

  - by EndangeringSpecies

  I want to setup dual boot Ubuntu on my machine in a separate partition. Plus, ideally, I want to get another, 3rd, partition for further OS experimentation. The hard drive is huge, hundreds of gigs, and essentially unfilled. The machine runs Windows 7 Home. Online I have seen mention of creation of partitions from inside Windows 7. But, I have also heard claims that to create the partition to house Ubuntu Windows has to be reinstalled, frying all the data on the machine. So, which one of these claims are right? Can you create additional partitions for other OS on a big Windows 7 hard drive without reinstall?

  Read the article

• A space-efficient filesystem for grow-as-needed virtual disks ?

  - by Steve Schnepp

  A common practice is to use non-preallocated virtual disks. Since they only grow as needed, it makes them perfect for fast backup, overallocation and creation speed. Since file systems are usually based on physical disks they have the tendency to use the whole area available1 in order to increase the speed2 or reliability3. I'm searching a filesystem that does the exact opposite : try to touch the minimum blocks need by an aggressive block reuse. I would happily trade some performance for space usage. There is already a similar question, but it is rather general. I have very specific goal : space-efficiency. 1. Like page caching uses all the free physical memory 2. Canonical example : online defragmentation 3. Canonical example : snapshotting

  Read the article

• How to use chain.p7b with Apache?

  - by Debianuser

  I wanted to setup a SSL website on Apache and applied for a certificate from my local ISP. All they sent me was a single file named chain.p7b. I have always used certificates from other vendors without any issues but they usually provide two files to be configured as SSLCertificateFile and SSLCertificateChainFile in Apache. Following instructions from several online resources, I opened the p7b file in Windows and extracted 4 certificates from the file. I then tried configuring Apache with one of the files and it worked, but shows a warning: The certificate is not trusted because no issuer chain was provided. I though I have to use remaining 3 files as SSLCertificateChainFile and/or SSLCACertificateFile. I tried that but it didn't work so I am assuming it might be something completely different. Anyone faced this issue before? The following page http://www-01.ibm.com/support/docview.wss?uid=swg21458997 talks about using a keystore but is that relevant to Apache?

  Read the article

• Adding Windows 7 to Fedora 17 Grub Boot Loader

  - by Kyle

  I'm trying to set up a dual-boot situation with my Windows 7 and Fedora 17 partitions and I left the install grub to /boot option on when I was installing Fedora. I would like to be able to add Windows 7 to the grub boot loader, but the advice I've seen online says to modify /boot/grub/grub.conf, but I don't have that file. $ ls /boot/grub/ splash.xpm.gz Has anyone done this? I'm thinking that I'll just need to re-install everything and use the Windows boot loader, but it would be nice to use grub instead.

  Read the article

• Wireless WAN (WWAN) on a Lenovo T500 - built-in or do I need a WWAN modem?

  - by Justin Grant

  I use a Lenovo ThinkPad 2055-3AU at work and I want to get a Wireless WAN data plan with a local mobile telecom provider. I've read conflicting reports online about whether my system is "WWAN-ready" or not. How can I find out which wireless WAN providers (if any) my system can support without buying a separate modem? I looked through Device Manager for anything resembling a WWAN device and didn't see anything, but I also wiped the machine when I bought it and clean-installed Windows 7 with only out-of-the-box Windows and Windows-Update drivers, so it's possible that the device is there but the drivers aren't installed. FWIW, the support page at http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=20553AU does not specfically list anything about Wireless WAN.

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• Reference manager for Ubuntu

  - by user36511

  I'm in dire need of a reference/citation manager in Ubuntu. The features I need the most are: 1) Metadata extraction/editing of pdf 2) Fetch metadata from online databases such as Google Scholar 3) Attach pdf or other file to reference 4) Tag references and recall those with a given tag or set of tags 5) Provide APA style citation for references (in integration with OOffice and/or Latex) Optional: Would be great if it can annotate/highlight pdfs. Mendeley probably does all of these, but it's behavior has driven me insane, especially when the number of references it's trying to handle is large. It constantly tries to sync with the web and creates duplicate references. I've tried JabRef, and while it looks like a decent piece of freeware, it doesn't do some of the above. I found others like Bibus, Referencer, etc. to be lacking or buggy or inactive development. Is there another option, or should I give up the search.

  Read the article

• Asus RT-N66U forgets USB-Printer

  - by heysamhey

  about a week ago I bought the new Asus RT-N66U as the new Router in our little company. There are about 5 clients and 2 printers. There's a USB-only printer as well, therefor we bougth a router with USB-printer sharing. The setup and everything works smooth, but then after one day, and I still haven't found out why, suddenly the printer dosen't show up in the list of connected devices in the routers webinterface anymore. Of course I loose the possibility of printig, even though the printer shows up as "online" in the system settings. Can anybody guess the reason for this problem? Thank you very much

  Read the article

• suddenly can't connect to Windows 7 PC from xbmc

  - by Damon

  I have xbmc installed on a softmodded classic xbox and all of a sudden I cannot connect to the shared folders on my Windows 7 PC. Well, it can connect but it wants a username and password, but none exist on my computer. It's been several weeks since I last used it, but it was working fine then! and no particular changes I can think of aside from I guess a few Windows updates. I've seen reference online to Windows Live essentials causing issues with file sharing, but I don't even have that installed. And I made sure to tick 'turn off password protected sharing' in my advanced network setup. I had the guest account turned off and working fine before, and tried turning it on but no luck. I can access my shared folders fine from other Computers and a ps3. I've read a couple threads of similar situations on various folders and none of their solutions have worked.

  Read the article

• 'IPv6' Newbie with IPv6 address assigment

  - by Cute Puppy

  I am new to IP v6 and I am looking to translate some existing private IPv4 addresses into v6 address assignment. Can someone please help me to answer/explain the questions below? If I have an v4 address of: 10.10.0.0/22 10.10.1.0/22 10.10.2.0/22 10.10.3.0/22 10.10.8.0/20 10.20.1.0/24 What will the new v6 address to be? I have been looking online @ http://www.subnetonline.com/pages/subnet-calculators/ipv4-to-ipv6-converter.php or other sites, Seems like they translated it directly to be: fe80::a0a:0 /118 fe80::a0a:100 /118 fe80::a0a:200 /118 fe80::a0a:300 /118 fe80::a0a:800 /118 fe80::a14:100 /120 Can someone please explain to me how we get to /118 from either "/22 or /24" (1. and 5) In addition, I would like to create the new private address based on the Unique local address "fc00::/16" How do I expand from there? Any help is greatly appreciated it!! Thanks,

  Read the article

• Cisco 2900 series router - 3x 3g HWIC - Can you use the same subnet for each HWIC?

  - by Lance

  We host a site with a 2900 series router with 3x 3G-HWIC cards installed. It is hosted with telstra and plugs into our corporate WAN. The card authenticates against radius and advertises a route into the WAN for which subnet it routes for. We have always used the same advertised subnet on each. Telstra have advised us that this could be the cause of some drop out issues whereby some services will work for some people and not for others and are saying effectively that their system will only use one of these at a time even though we can see the interface is online and assigned a WAN IP address. Has anyone out there configured a multi HWIC setup before and if so are they using different subnets for each or the same?

  Read the article

• Running Coldfusion Commands inside an HTML File?

  - by KM01

  Hello, Is it possible to run CF commands inside an HTML file by updating Apache configs/htaccess file? When I searched online, I didn't come across any answers for CF, saw several posting for PHP (perhaps I am not searching for the right terms ... ?). Specifically, we have CF 6 (I know, don't say it) on Solaris, and Apache 2, and was thinking of using this line: AddType application/x-httpd-coldfusion .html so we can use cfinclude inside the HTML files, but this did not work. Your time, ideas and thoughts are much appreciated! KM

  Read the article

• OS X SnowLeopard menubar icons appear/disappear in 8 second cycle

  - by Robot

  I just bought a new Mac Mini, and used Migration Assistant to move a user from an iMac to it. All went well, except a very strange behavior... the default OS X menubar icons like time, spotlight, etc (but NOT user installed app icons like dropbox or xmarks) appear and disappear in a very regular 8 second cycle. They appear for about 2 seconds, and then disappear for about 6. This is a screenshot with the icons, and this is a screenshot without them. This is very annoying and I have not found anything online with similar symptoms. Any ideas?

  Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >