Search Results

Search found 28441 results on 1138 pages for 'ubuntu lts'.

Page 287/1138 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

• SSD Tweaks for Ubuntu 12.04

  - by Mustafa Erdinç

  I need to tweak my Dell XPS 13z SSD for maximum performance and life cycle than I read the solutions explained here, but it is for 11.10 and my fstab is different. For now my fstab is looks like this: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=abf5ce9e-bdb7-4b2f-a7bd-bbd9efa72a98 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda2 during installation UUID=491427b2-7482-4483-b6eb-7c564b991aff /home ext4 defaults 0 2 # swap was on /dev/sda3 during installation #UUID=7551000d-e708-4e0f-9fd2-9f93119f63fb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 tmpfs /tmp tmpfs mode=1777 And my rc.local is looks like this: echo noop > /sys/block/sda/queue/scheduler echo deadline > /sys/block/sda/queue/scheduler echo 1 > /sys/block/sda/queue/iosched/fifo_batch exit 0 Do you have any suggestions, what should I do? Regards

  Read the article

• How can I get shockwave flash to work on Ubuntu 12.04

  - by John Hill

  I've tried most of the things suggested on this site and others so far. It's kind of frustrating because this is a home computer and I mainly use it for browsing the internet and watching YouTube videos. When I try to install something that might fix it, it just downloads a bunch of files and says to extract them or whatever. I'm not sure what to do with the files after I extract them. That's probably the main issue: I don't have a lot of experience working with computers at this level. I'm used to Windows, which seems to make most software installs idiot-proof. Any suggestions are appreciated!!

  Read the article

• Sound and Video Skips on Ubuntu 11.10 64 bit

  - by Timothy LaFontaine

  I preformed a dist-upgrade from 11.04 to 11.10 and now I can not listen to any music or sounds (log on sound included), nor watch video without it stopping and then catching up and stopping again (This is flash or .mp4 through VLC). I did not have this issue with 11.04 and have even just preformed a fresh install of my system. I have tried to reinstall Pulse Audio and removing the .pulse folder but to no avail. Any help would be appreciated.

  Read the article

• ubuntu 10.10: Totem streams only certain video from iphone

  - by Hans Schmidt

  I recently installed a plug-in for Totem movie player. This allows the app to receive and play AirPlay-streamed video from iphone to totem player: http://www.omgubuntu.co.uk/2011/01/airplay-video-playback-comes-to-totem Actually this works fine with youtube videos. But when it comes to other apps in iPhone (such as Digital TV App) the streaming does not work. In the app I can choose Totem Player, but Totem Player itself stays empty, i.e. nothing will be streamed. As mentioned choosing Totem Player for youtube video works fine. Do you guys have any idea what makes the difference that it works only for youtube?

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Ubuntu 12.04 Wireless won't connect with gnome network manager or wicd

  - by iceblueirish

  I have an HP Pavilion Slimline s3100n and I cannot for the life of me get the wifi to connect and stay connected in any circumstances with network manager or wicd... I'm pulling my freaking hair out with this, and I can't get a dang thing down AT ALL... switching to wicd didn't work, putting my password in the connections editor didn't work... nothing at all is working... everything that everyone else is saying to me is chinese and I really just want my pc to work... please help... I will provide any information needed to help me with this. just instruct me on how to find that information. Don't pass this question by without helping me please... I'm so frustrated...

  Read the article

• Cannot boot Ubuntu 12.04 on Lenovo V570 fresh install

  - by Jonathan

  I just did a fresh install of Kubuntu 64 bit 12.04 (from the DVD) to a Lenovo V570 laptop. I did a dual boot install with Windows 7. I used the boot layout leftover from Linux Mint 12 (which was working). The installation finished with what seemed to be a success. However, when rebooting, I get this error: GRUB: “invalid arch independent ELF magic” after install on SSD Then I did grub-install and update-grub (I didn't install grub-efi, so maybe this is the problem?) Then I got "unknown filesystem error" at the grub prompt. Desperately, I gave /boot the bootable flag. Then on a reboot,... I got some strange screen with the letters PXE. It flashed momentarily, too fast to read, and then the computer jumped to a screen which asked me from which drive was the boot desired to be. As of now, I have no idea what I am doing.

  Read the article

• i can't uninstall ubuntu software

  - by cunix

  root@cunix:/home/cunix# sudo apt-get remove fern-wifi-cracker Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libqt4-test libqt4-sql-mysql mysql-common libqt4-xmlpatterns libqt4-help python-qt4 python-sip libqt4-sql-sqlite libqt4-sql macchanger libqt4-designer libmysqlclient16 python-scapy libqt4-scripttools Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: fern-wifi-cracker 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 3,514kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 167661 files and directories currently installed.) Removing fern-wifi-cracker ... dpkg (subprocess): unable to execute installed pre-removal script (/var/lib/dpkg/info/fern-wifi-cracker.prerm): Exec format error dpkg: error processing fern-wifi-cracker (--remove): subprocess installed pre-removal script returned error exit status 2 Errors were encountered while processing: fern-wifi-cracker E: Sub-process /usr/bin/dpkg returned an error code (1) how to uninstall?

  Read the article

• My Android phone isn't being detected by Ubuntu

  - by Lara

  This is what I've got from terminal, looks like it can see the phone as a USB device just fine but isn't showing up under fdisk so I can't mount it. It automounts just fine in my VMWare Windows. And Internet tethering works fine while under Linux (haven't tried under Windows). Here's lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 019: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 001 Device 003: ID 05ca:18c0 Ricoh Co., Ltd Bus 001 Device 004: ID 0489:e00f Foxconn / Hon Hai Foxconn T77H114 BCM2070 [Single-Chip Bluetooth 2.1 + EDR Adapter] Bus 003 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd Bus 002 Device 012: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard And here's sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001ff06 Device Boot Start End Blocks Id System /dev/sda1 2048 681845797 340921875 7 HPFS/NTFS/exFAT /dev/sda2 * 681846784 845686783 81920000 83 Linux /dev/sda3 845686784 968566783 61440000 7 HPFS/NTFS/exFAT /dev/sda4 968568830 972475081 1953126 5 Extended /dev/sda5 968568832 972475081 1953125 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 2000 MB, 2000000000 bytes 255 heads, 63 sectors/track, 243 cylinders, total 3906250 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe4c2ec7 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• removed ati proprietary driver, tried to hibernate, destroyed ubuntu installation. help?

  - by Niklas

  I totally ruined my Ubuntu 10.10 Desktop x64 installation today. I've never been able to hibernate or suspend (not with my laptop, server or htpc), not even through this guide. So I read a post here on askubuntu.com that said that the proprietary drivers may be in the way for it to work. Therefore I removed my ATI-drivers, rebooted, then tried to hibernate the system. I got some error about "blk_something_something didn't work, resubmitting1". So I turned off the computer and then tried booting up. I see the ubuntu splash but after that I'm greeted with this screen: The upper dot is the mouse pointer since I can move it with the mouse (I have ubuntu set to login automatically). I don't know how this happened. What can I do to fix this? I'm getting seriously irritated over how buggy ubuntu is, why doesn't even suspend/hibernate work (remember that I have 3 different systems where it fails)? So what is the next step? I want to get into cli mode and reinstall the driver but since I'm relatively new to ubuntu I don't know how to get into a terminal without logging in first. And if I press shift during boot I can't get into grub either and try something from there. Please come with all suggestions you can think of! Thank you very much! edit: Can I use ubuntu on a usb to insert the driver I need - if that is the problem?

  Read the article

• How to have many Ubuntu workstations centrally managed?

  - by Richard Zak

  I have about a dozen Alienware workstations that are used for CUDA development and for execution of MPI jobs. What is the best way to manage them? I'd like to have something like an apt-get but for several systems, and a way to reimage a system simply and centrally. It seems that a combination of Landscape and Canonical's MAAS would be a good fit, but I need an open source solution. Any thoughts?

  Read the article

• Firefox, Chrome, and Flash on Ubuntu

  - by Zimmer

  Ok I have recently run into some problems and was hoping you guys could help; 1) On Chrome sometimes when I play a video (even on Youtube) the audio won't work (yet other apps audio will work) but after pressing the play button (pausing and unpausing the video) it finally works but if I pause the video and click play it goes back to not working until I re-do that process. 2) When I go to play videos in firefox or go to grooveshark it says I don't have flash; but I do and when I go to install flash it says I have the LAST version for linux but flash works on Chrome fine (well except the audio problem above which annoys me to no end!)

  Read the article

• Can't access Windos 7 OS in Ubuntu

  - by Myers

  When I try and Access my Windows 7 OS I get the following memo and I have no idea what to make of the code. Error mounting /dev/sda2 at /media/name/Windows7_OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda2" "/media/name/Windows7_OS"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. What should I do ?

  Read the article

• set proxy for vpn server on ubuntu server 12.4

  - by Morteza Soltanabadiyan

  I have a vpn server with HTTPS, L2TP , OPENVPN , PPTP. i want to set proxy in the server so all connection that comes from vpn clients use the proxy that i set in my server. I made a bash script file for it , but proxy not working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 Now , I don't know what to do to make a global proxy for server and all vpn clients use it automatically.

  Read the article

• How can I install new locale to Ubuntu?

  - by UniMouS

  $ locale -a get output like this: C C.UTF-8 en_AG en_AG.utf8 en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_IN.utf8 en_NG en_NG.utf8 en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZM en_ZM.utf8 en_ZW.utf8 POSIX zh_CN.utf8 zh_SG.utf8 How can I install a new locale, for example en_US.ISO-8859-1. After this operation, I wish en_us.ISO-8859-1 could be listed in the locale -a list.

  Read the article

• ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

  - by Bence Mihalka

  When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• Brightness problem after upgrade Ubuntu 13.10

  - by Daniel Yunus

  I have upgrade to 13.10 recently. But, the brightness is working after I add this in version 13.04 before. After I upgrade to 13.10, this code is not working on ASUS Slimbook X401U #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 0 > /sys/class/backlight/acpi_video0/brightness exit 0

  Read the article

• How to find keycodes for Fn + keys in Ubuntu 11.10

  - by budwiser

  I'm trying to find out the keycode for Fn+? keypress (left arrow). Xev outputs FocusOut event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0,    keys:  4294967213 0   0   0   0   0   0   0   0   0   0   0   0   0   0   0              0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   If it is telling me the keycode here, I'm not able to interpret it so help would be appreciated. I'm also curious for finding out if it's possible to bind something to Fn+Del but when trying out this combination, Xev outputs KeyPress event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1984903, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XmbLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1985008, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False which is exactly the same as pressing del without Fn. So, summary for short How can I find keycode for Fn+? (left arrow)? Is it even possible to bind something to Fn+Del or am I facing windmills here?

  Read the article

• cannot mount root filesystem on 10.04

  - by howaryoo

  I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• can't run sqldeveloper on Ubuntu

  - by nazar_art

  I tried to install sqldeveloper by following way: Download SQL Developer from Oracle website (I chose Other Platforms download). Extract file to /opt: sudo unzip sqldeveloper-*-no-jre.zip -d /opt/ sudo chmod +x /opt/sqldeveloper/sqldeveloper.sh Linking over an in-path launcher for Oracle SQL Developer: sudo ln -s /opt/sqldeveloper/sqldeveloper.sh /usr/local/bin/sqldeveloper Edit /usr/local/bin/sqldeveloper.sh replace it's content to: #!/bin/bash cd /opt/sqldeveloper/sqldeveloper/bin ./sqldeveloper "$@" Run SQL Developer: sqldeveloper But it shows next output: nazar@lelyak-desktop:/opt/sqldeveloper? ./sqldeveloper.sh Oracle SQL Developer Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved. LOAD TIME : 401# # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f3b2dcacbe0, pid=20351, tid=139892273444608 # # JRE version: Java(TM) SE Runtime Environment (7.0_65-b17) (build 1.7.0_65-b17) # Java VM: Java HotSpot(TM) 64-Bit Server VM (24.65-b04 mixed mode linux-amd64 compressed oops) # Problematic frame: # C 0x00007f3b2dcacbe0 # # Core dump written. Default location: /opt/sqldeveloper/sqldeveloper/bin/core or core.20351 # # An error report file with more information is saved as: # /tmp/hs_err_pid20351.log # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # /opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 1193: 20351 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}" 134 nazar@lelyak-desktop:/opt/sqldeveloper? java -version java version "1.7.0_65" Java(TM) SE Runtime Environment (build 1.7.0_65-b17) Java HotSpot(TM) 64-Bit Server VM (build 24.65-b04, mixed mode) Here is content of /tmp/hs_err_pid20351.log How to solve this trouble?

  Read the article

• Boot from Ubuntu ISO on a hfsplus partition (macbook pro)

  - by user279771

  I would like to be able to boot from an ISO stored on an HFS+ partition (the main partition on my macbook pro). Here is what I've done so far: (writing in shorthand :D) grub> insmod hfs,hfsplus,loopback,part_gpt grub> loopback loop (hd0,gpt2)/location/to/img.io grub> configfile (loop)/boot/grub/loopback.cfg ... This does not work. tab-complete of the (loop) path does not work... However, this does work (tab-complete and all) if the iso comes from my ext3 partition. For particular reasons, I can't have the iso images on the ext3 partition, they need to be kept on the hfs+ partition. What should be done?

  Read the article

• Cannot mount a CIFS network share on Ubuntu over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated.

  Read the article

• Is QtQuick.Controls available on Ubuntu 13.10

  - by javascript is future

  I was looking to do UI development in QML, and I really want it to look native. I found the QtQuick.Controls (http://qt-project.org/doc/qt-5.1/qtquickcontrols/qtquickcontrols-index.html), but when I try make a simple application, it tells me that QtQuick.Controls isn't installed. main.qml: import QtQuick 2.1 import QtQuick.Controls 1.0 Rectangle { height: 200 width: 200 } terminal: $ qmlscene main.qml file:///tmp/main.qml:2 module "QtQuick.Controls" is not installed Also, I downloaded the source from https://qt.gitorious.org/qt/qtquickcontrols/source/stable, ran qmake && make, but this returned the following output: cd src/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/src.pro -o Makefile ) && make -f Makefile make[1]: Går til katalog '/tmp/qtquickcontrols/src' cd controls/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/controls/controls.pro -o Makefile ) && make -f Makefile make[2]: Går til katalog '/tmp/qtquickcontrols/src/controls' g++ -c -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -O2 -fvisibility=hidden -fvisibility-inlines-hidden -std=c++0x -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_XKB -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_QUICK_LIB -DQT_QML_LIB -DQT_WIDGETS_LIB -DQT_NETWORK_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/share/qt5/mkspecs/linux-g++ -I. -I/usr/include/qt5 -I/usr/include/qt5/QtQuick -I/usr/include/qt5/QtQml -I/usr/include/qt5/QtWidgets -I/usr/include/qt5/QtNetwork -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtGui/5.1.1 -I/usr/include/qt5/QtGui/5.1.1/QtGui -I/usr/include/qt5/QtCore -I/usr/include/qt5/QtCore/5.1.1 -I/usr/include/qt5/QtCore/5.1.1/QtCore -I.moc/release-shared -o .obj/release-shared/qquickaction.o qquickaction.cpp qquickaction.cpp:49:39: fatal error: private/qguiapplication_p.h: No such file or directory #include <private/qguiapplication_p.h> ^ Is there some PPA I could use, or do I have to wait for Trusty to get out, before I can use native controls from Qt? Regards

  Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >