Search Results

Search found 13075 results on 523 pages for 'bounding box'.

Page 288/523 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

  - by Gert

  I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

  Read the article

• Can't connect to my FTP server, why?

  - by Joseph

  I have a windows 2008 server running with FTP 7 on IIS 7. I have it configured to connect as it is out of the box, with a particular user (lets say john) with read/write access. When I use my FileZilla client software, I can connect to the server as john just fine. No problems at all. However, when I try to connect using Windows Explorer or using the cmd prompt I get stone walled, saying "Login failed". My client machine is Windows Vista Ultimate. Does anyone know what might be causing this?

  Read the article

• ASP.NET MVC hosting recommendations

  - by chris

  I'm looking for recommendations for hosting an asp.net MVC application. Obviously, we need to be able to have access to configure IIS directly - I'd prefer not to have to go thru a control panel. The web server needs to have a dedicated IP, since some clients will be accessing it via IP. We need at least a SQLServer 2005 database, ideally on the same box. Load and usage will be pretty low, so a virtual machine will probably be fine. Does any one have any recommendations that meet the above constraints?

  Read the article

• Windows 2008 additional disk going offline with reboots on Amazon EC2

  - by Ernest Mueller

  OK, so I took the stock Windows 2008 64-bit Amazon AMI and wanted to add a D: drive for page file space and crash dumps. I launched the instance with a second EBS volume attached as xvdf and went into Disk Management set it online, and added the page file and crash dump settings and all that works. But when I reboot, the box comes back up with that second drive as "Offline." How do I get that disk to automatically come online on reboot (or most notably, when I turn this into an AMI and launch more instances off it - I've tried that too and same deal with the D:).

  Read the article

• CentOS - Disk Quota X% warning

  - by jfreak53

  I currently have disk quotas working perfectly for Hard Limit Quotas on a CentOS 5 box. Quotas are working fine, but I am looking for a way to alert users either in a Cron or Automatically as Quotas is already running, when they are within X% of their Hard Limit Quota? I would like this email to go out to an email address I configure somehow for each user. I've looked all over the place but can't find it. All I can find is warnquota which only works when a user goes over Quota. The problem is I use Hard Limits, so my users will never go over quota. It needs to warn them when they are within X% of their limits.

  Read the article

• Windows 7 - Opening files from Windows Explorer with Elevated Permissions?

  - by Martin Smith

  I've just started using Windows 7 and am instantly finding one aspect pretty annoying. When I open certain files from Windows Explorer / Windows Search results etc then I then cannot save them as it throws up the following message box. C:\Windows\System32\drivers\etc\hosts You don’t have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the My Documents folder instead? [Yes] [No] However I can't see any way of opening the file with elevated permissions. Is the only workflow to first open the application with elevated permissions then open the file?

  Read the article

• linux kernel option to set sata disk to udma/133 1.5gbps

  - by John Doe

  hi, i try to speed up boot time of my linux server box which uses removable HDD rack's the current boot time is around 2 min's but if i connect the hdd's directly to the mainboard its about 2 sec's the problem is that ahci's kernel implementation causes a timeout of around 30 seconds for each disk during boot which originates from the hdd-rack after the timeout the kernel prints that the disk is limited with speed to 1.5gbps and udma/133 is used so the question i have is: how can i set this in grub as a boot option so the kernel doesnt have to wait for a timeout and just hardcoded limits the speed of the disks? i read about a few options like pci=nomsi or such, which dont work thats why im asking for limiting precisely the disks during boot thx

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• Multiple Domains on an Exchange Server

  - by William

  When I create a new user in exchange, it asks me to provide the User Logon Name. There is a dropdown box that supposedly allows you to select a domain for the user's login. What is this referring to? How can I make it so that I can create users with different domains in their user logon name? p.s. I am very aware of 'Accepted Domains' in Exchange allowing one user to have several email addresses in different domains. I am just curious how I can modify the user's Logon name specifically.

  Read the article

• monitor just what's going on -on a firewall

  - by bbutle01

  I have this little snapgear firewall. It's a little purpose built box running a custom linux, SH4 processor @240 Mhz, 64MB of ram. Basically how close we are to capacity is a mystery to me. I know I can run top and see the status of all the processes, but how can I see just how much of the processor is going to passing data... and how to estimate when I'm going to need to upgrade, and by tweaking iptables rules, how does that help/hurt the processor. suggestions?

  Read the article

• nginx serves broken characters (nginx on linux as guest system in vbox)

  - by Andrew123321

  I have nginx 1.2.0-1 on debian 6.0.5. I have file test.css. I fill it with "abcd1234". Open it in browser. Then I change the content to "mnop". I receive "abcd" in response. I have all the files in folder shared between Windows (host) and Debian (guest) using Virtual Box. When I put the file elsewhere the problem does not occur! Any idea what can cause this? Thank you (I've been editing question as I was discovering the problem)

  Read the article

• problem getting scanning to work on epson workforce 610

  - by thatisvaliant

  i installed the latest epson software on my user's computer. everything works fine from the admin account (printing / scanning). yet, when i go to user's account (the standard user mode account the company employee uses on there machine) and launch the epson scan software or scan settings software it times out and puts up a dialog box asking me if i want to use the trouble assistant. my question is why would this all work in the admin account yet not work in the user mode account? any help is greatly appreciated.

  Read the article

• What are the requirements for gettings django translations to work?

  - by Espen Christensen

  Hi, I am hosting several djangosites on a CentOS 5 box. But I'm having difficulties with translations. So first i had to upgrade the gettext package from 0.14 to 0.16, but that didn't help. Now i can make and compile tranlsations files with the managment commands, but the translations does not show. I am sure that the translation files are located at the right place since they work with the same setup on a local installation, and django's own translation files does not work. (e.g the admin is not translated). What could i be missing in my server setup that makes this happen?

  Read the article

• Apache - mod_pagespeed freezes my website

  - by Jonathan Rioux

  I have installed the mod_pagepseed module for Apache. I am using Debian so I downloaded the .deb file, and installed it successfully. I then configured some filters, and it worked like a charm for some minutes. Then after something like 10 minutes, my website no longer responded to the requests. When I was requesting for my website, it said "Waiting for www.blablabla.com" and I never got the page back from the server. I checked the processes running on my Debian box with top -d 0.5, and nothing eats up the CPU. To make my website responding to requests again, I must do a /etc/init.d/apache2 restart. And then it works again with mod_modspeed applying it's filters for a couple of minutes, and no more response again. How can I diagnose this issue? Is there some other configurations in the mod_pagespeed.conf file that I must set?

  Read the article

• NAT and ISP Subnet when load balancing on pfsense?

  - by dannymcc

  I have a pfsense box that I'm trying to plan the configuration for. I am going to be load balancing two ISP's, each with their own /29 static IP subnet. The question I have is in relation to the way those IP's are associated with workstations on the local network. Currently I have some workstations with local (192.168.1.0/29) IP addresses, and other more complicated workstation setups have their own public IP address. Some of the more complicated systems have a NAT 1:1 configuration where I forward a public IP address to a local IP address. Others however are directly on the ISP subnet and cannot be seen on our local network. Is this configuration possible with pfsense? If so, what terms should I be looking through the documentation for? Here is a simple/brief diagram of what I am trying to achieve.

  Read the article

• Run a command from Windows 7 Start Menu

  - by Abhijeet Patel

  I'm trying to run commands such as "cmd.exe", "appwiz.cpl" etc by typing it in the Search box of the Start Menu in Windows 7 (x86). I'm able to do this just fine in Vista. After typing in "cmd" I notice that I see a link to "Programs" in the start menu so it seems that "cmd" is being recognized but when I click on "Programs" link which is shown,I get the following message. "These files can't be opened. Your internet security settings prevented one or more files from being opened" P.S. - I'm not looking for enabling the "Run" command to show in the Start Menu Any help would be much appreciated

  Read the article

• Set Default Program for All Users on Server

  - by MattN

  I work with a large server environment that's running Windows Server 2003, 2008, and 2012 now on some boxes. We have a custom-built log viewer program that associates with two file types that I'd like to set to be the default program for all users across all boxes, so new users don't have to set the default program themselves on every box they log into. Ideally I'd like to have a simple registry script we could push out to all machines at once. I realize this likely means changing the registry entries for either HKCR or HKLM for the file extensions, but adding the program location with %1 extension to \shell\open\command value in HKLM simply opens the program and does not also load the log file. Am I just missing an open and play setting, or am I looking at this entirely wrong? (And I know the script will need to be different for 2003 and 2008, but changing the version for two scripts isn't hard) Thanks!

  Read the article

• Modern open source NIDS/HIDS and consoles?

  - by MattC

  Years back we set up an IDS solution by placing a tap in front of our exterior firewall, piping all the traffic on our DS1 through an IDS box and then sending the results off to a logging server running ACiD. This was around 2005-ish. I've been asked to revamp the solution and expand on it and looking around, I see that the last release of ACiD was from 2003 and I can't seem to find anything else that seems even remotely up-to-date. While these things may be feature complete, I worry about library conflicts, etc. Can anyone give me suggestions for a Linux/OpenBSD based solution using somewhat modern tools? Just to be clear, I know that Snort is still actively developed. I guess I'm more in the market for a modern open-source web console to consolidate the data. Of course if people have great experiences with IDS' other than Snort I'm happy to hear about it.

  Read the article

• Lost USB BlueTooth Dongle for Keyboard and Mouse

  - by Tyndall

  I lost my USB bluetooth dongle (from HP) which I used for a wireless keyboard and mouse. They came together in a set when I bought my last HP computer. Are the keyboard and mouse useless now? or will any bluetooth dongle allow them to work? If I can just buy a new one - any recommendations on a replacement (good price, and perhaps works with Windows and Ubuntu out-of-the-box? Forgive me if this is an easy question. I'm just not that familiar with wireless mice/keyboards.

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• I have a server running Windows 2008 R2 Core and it needs to hosts either SVN or GIT

  - by Jason Adams

  The server allocated for our cross platform projects (both Mac & PC) source repository is running Win2008R2 Core. We're really happy with its stability and we aren't interested in moving over to non-core. We need to get either SVN or GIT installed on the aforementioned box in the shortest amount of steps. We know the advantages/disadvantages of both systems. That being said, we don't care which one we use, we're just are looking for the path of least resistance on setting up a repository on a machine running R2 core.

  Read the article

• Backup SQL server db issue: delete old backup files

  - by David.Chu.ca

  I tried to use sqlmaint.exe tool to back up a database on a remote PC. Here is an example of backup: sqlmaint.exe -S remoteSQLServer\SQLInstance -U username -P pwdxxx -D myDB -BkUpMedia DISK -BkUpDB C:\MSSQL_Backups -DelBkUps 3days ... Here I specified to delete backups older than 3 days. However, the job seems not deleting old bak files on the remote PC(where the SQL server sits). The remote PC has Windows 2008 Server. I also set the C:\MSQL_Backups as shared network drive for EnyOne as owner. My understanding is that the job will delete any bak files older than 3 days. Not sure what I missed? By the way, the job runs at a box with SQL server 2005 installed.

  Read the article

• Looking for Mini itx capable of running Photoshop + Illustrator (cs4 or higher)

  - by drozzy

  Ok, so I want to build a small pc for my gf that she can take with her instead of the crappy laptop that she has. Overall I think the complete system should not weight more than 10 lbs. The requirements are to run at least 4 applications simultaneously, and be able to switch between them with no problems: Photoshop Illustrator Word editor Browser Should be able to handle 1920x1200 resolution. I am currently looking at LGA775 socket as I can just transfer my desktop cpu Q6600 to it. Currently deciding between DQ45EK and DG41TX, but any other suggestions are welcome. So I am thinking something along the lines of: MINI-BOX M350 Case with 90 watt psu Q6600 cpu (my desktop cpu) 2x2GB kingston ram (or similar) Video? Need external or built-in G45 on DQ45EK will do? My primary concern is whether the 90WATT is sufficient of the Q6600? Thanks

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• e-mail no longer coming to aol inbox since I opened a Hotmail account [closed]

  - by Dave

  I recently set up an email account with Hotmail. I have used AOL e-mail for years and would like to keep this as my main source for sending/receiving e-mail. When I set up the Hotmail account there was an option to have all my e-mail accounts forwarded to the Hotmail inbox. I set up this option and the page promised that all incoming mail would still be visible in the original inbox, in this case my AOL account. Well everything does come to the Hotmail account, the only problem is that I no longer receive these e-mails in my primary/desired location which is AOL. I went back and made sure the box was checked that provided the option through Hotmail that said "leave a copy of my messages on the server" (AOL) How do I get the e-mail that is being forwarded to Hotmail from my AOL account to still be visible in AOL, it should be in AOL inbox as that is the original destination but it is gone. Suggestions?

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >