Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 288/376 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• Why does Snow Leopard report incorrect battery levels for Bluetooth input devices after switching them to Apple rechargeable batteries?

  - by GeneQ

  I have a Magic Trackpad, Magic Mouse and the Apple Wireless keyboard. They work fine. Two days ago, doing my part for the environment, I changed all their batteries to Apple rechargeable batteries. Today I noticed that the battery level meter for all three devices report the wrong battery level. The trackpad reports 93% charge, the keyboard 75% charge and the mouse 65% charge. This can't be right; these are fully charged new batteries. They can't possible drop that much within 48 hours. Has anyone else encountered this problem? And are there any solutions?

  Read the article

• Wireshark does not see interfaces (winXP)

  - by bua

  Short story: Wireshark is working....on my winXP-32b ... usage .... Long long time later Wireshark does not work It can't find any usefull interface (just VPN) ipconfig /all Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1490 Dual Band WLAN Mini-Card Physical Address. . . . . . . . . : SOME VALID MAC Ethernet adapter eth0: Connection-specific DNS Suffix . : xxxx Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : SOME VALID MAC Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.12.68 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168..... ..... Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Fortinet virtual adapter Physical Address. . . . . . . . . : SOME VALID MAC Following steps didn't help: Several Wireshark re-installation Several LIBPCAP re installation SP3 for winXP Any ideas welcome.

  Read the article

• How to troubleshoot memory card read?

  - by shinjin

  The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

  Read the article

• Mouse wheel does not work in Excel 2007

  - by Chris Noe

  I am running Office 2007 on Windows XP-SP3. My mouse wheel works fine in other applications, meaning that it scrolls information up and down when the mouse is positioned over a given panel. It's even working fine in the other Office 2007 apps, so this is not a hardware or driver problem. It doesn't help to click on a cell to give the worksheet focus. I've tried various Advanced options that people recommend, to no avail: Allow editing directly in cell Zoom on roll with IntelliMouse What the heck, has Microsoft disabled this most useful functionality?

  Read the article

• Block a machine from accessing the internet

  - by Simon Rigby

  After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

  Read the article

• Printing documents on HP printer very slow

  - by maxim

  I have a strange problem with HP drivers. I have configured a HP printer 2025dn with LAN connection, on 3 pc, using the cd rom of HP driver. All works well, but sometimes for certain documents the time for printing is very slow and long. I observe during this situation, in task manager, a process called rundll32.exe loads CPU at 100%. If I kill that process the printer starts printing fast the document in the queue. I wondering the reason of this strange behaviour.

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• How do I determine which HD is involved in the Event Viewer?

  - by Rod

  My PC apparently crashed before I came home from work (so my daugthers tell me; they rebooted it). The first thing I did, after it came up, was got into the Event Viewer to see what it said. Several hours before they rebooted it, there's a message in the event viewer that says: The driver detected a controller error on \Device\Harddisk5\DR5 I've no idea what that means. I got into Computer Manager, to take a look at the disks on my machine. There's only 1 hard drive, and a few slots for microSD, etc, but none of them are labeled "Harddisk5", nor is there anything there labeled "DR5". How do I determine what, if anything, those are? Could they be USB drives that my daughters used?

  Read the article

• Anything to share a printer from 32-bit to 64-bit Windows?

  - by marklam

  I've got a printer which only has 32-bit drivers, so it's installed on a 32-bit machine (XP). I need it to appear as a printer (with duplex control etc) on a 64-bit machine (Vista). I can't just share it using Windows printer sharing because the 64-bit client requires drivers to connect to it. There's no 64-bit driver for a similar printer that works (using the new port named \\server\printername). I've tried the ghostscript approach but that doesn't seem to help with the duplex control etc. Printeranywhere doesn't support 64-bit OS yet. Is there another way to do this?

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

• VGA resolution with Sony Bravia TV

  - by prestomation

  I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Why is the size of windows off by 226x238 if defined via the Window Rules?

  - by Bobby

  I have installed Sawfish 1.8.2 from source on my new Ubuntu 12.04 installation following the Debian instructions, but I had this problem also with the stock 1.5.3. Whenever I define dimensions in the Window Rules for a window, the size is off by exactly 226x238 pixels, which means that 100x100 turns into 326x328. That's a very odd behavior, given that Sawfish is saving and loading the dimensions of the windows correctly (if saved via the window menu). Some additional system information: $ uname -a Linux Dagon 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ sawfish --version sawfish version 1.8.2 nvidia proprietary driver, 9600GT Two monitors, 1920x1080 + 1440x900 in one session. Positionng the windows is working fine, only the dimensions are off by that odd number. Does somebody have an idea why?

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• I can't get my Macbook Pro to print to an IP addressable printer

  - by Pieter

  Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

  Read the article

• Command+Tab not working on MacOSX Client with Synergy

  - by dragonmantank

  I have an Ubuntu 11.10 laptop paired with an Apple Wireless Keyboard. I'm using the answer on this question to swap the Command and Option keys so that they are mapped like a regular keyboard. This works fine in Ubuntu. Now I have a Macbook Pro running as a Synergy Client. This mapping kind of works on the Macbook, but it only allows me to Command+Tab between two programs, not all of them. Copy, Paste, and other Command keys seem to work fine, but not Command+Tab. It's annoying just because I use the keyboard a lot. And yes, I could switch to syncing the keyboard and the Macbook, but I use the Ubuntu laptop more.

  Read the article

• Windows 8.1 & manual removal of "Sentinel Runtime Drivers"

  - by uos??

  I'm trying to install Windows 8.1 (basic upgrade from Windows 8). It is complaining of Sentinel Runtime Drivers incompatibility. I've looked for it in my Programs & Features list, but it's not there by that name nor SafeNet (as related by google search) nor do I see any obvious candidates for it having been bundled with another listed application. I tried the "Sentinel Runtime Driver Cleanup" program from the SafeNet website. It ran but was ineffective, even after a reboot. Do you recognize this "Sentinel Runtime Drivers"? I ran MalwareBytes too, just in case, but it found nothing.

  Read the article

• How To Cancel Pending Windows 7 Updates

  - by Itai

  How To Cancel Pending Windows 7 Updates? The key is pending. The shutdown button has the windows update symbol meaning that there are updates that were selected to be installed which were download and will be installed upon shutdown. The only thing is that my machine will no longer boot if I let it install those updates! They are incompatible with a driver needed in the system and I did not found out until too late. The system admin used a recovery disk to get back to the previous restore point, only the updates are now pending, so I need to cancel those before the machine shutdowns next.

  Read the article

• Server 2008 Active directory file sharing Restriction

  - by Usman

  My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

  Read the article

• Windows 7 Won't find Lexmark X4550

  - by cameronoleav

  I just got Lexmark X4550 wireless printer and want to have it installed on my laptop Windows 7 Beta. I have installed using Lexmark drivers and doing a "add a printer" device search. But when I tried to print a document i got an error message: "Communication not available. The printer cannot communicate with the computer...". This pinter used to work perfectly on my Windows XP Pro SP3. Any help would be greatly appreciated.

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• Network Block Device (NBD) clients for Windows or similar solutions

  - by przemoc

  Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Why does Hyper-V and Windows Backup crash (BSOD) after successfull backup?

  - by Payson Welch

  Hello I am running Server 2008 R2 with a handful of Hyper-V guest nodes. If Windows backup runs without any of the Hyper-V nodes running, the server is fine. If Hyper-V runs a backup while the Hyper-V nodes are running, it is fine until a few minutes after the backup completes, and then it BSODs. The storage location for the backup is iSCSI - I am wondering if anyone has any input on what might be causing this? I don't have the Hyper-V nodes setup on a vlan and there is only one NIC on the server. Is it possible this is a networking / driver issue, and if so how would I reconfigure the networking to fix this?

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >