Search Results

Search found 9276 results on 372 pages for 'chris driver'.

Page 289/372 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• I install Ubuntu 13.10 and reboot and im on KDE desktop?

  - by jgamer578

  Hi I'm Jacob and I have no idea what's going on. I installed Ubuntu 13.10 today and was playing around with it for a while and dl'd a bunch of apps from software center and stuff. Eventually I installed steam and (finally) got it working. I downloaded TF2 and had some weird issue where the screen got so distorted to the point I could not play. So I dl'd a driver for my graphics card from the additional drivers app (or whatever it's called) and when it was done I restarted my computer (because it said to.) When the PC booted up it loaded the KDE desktop and I have no idea why. I had unity before I rebooted. Ubuntu 13.10 is the only OS installed on my PC, and I still have all the apps that I downloaded, but I kinda like unity (I started using Ubuntu after they switched to unity) and want it back. Thanks for reading and any help in advance, Jacob.

  Read the article

• How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

  - by lexu

  I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

  Read the article

• How to disable Microsoft eHome MCIR Keyboard and company?

  - by AndrejaKo

  Hi! I'm and unlucky owner of and Acer 7720G laptop which, like many in its category, has receiver for a proprietary infra red remote control device (which I did not receive with my laptop!) . Now my problem is that the receiver is detected as Microsoft eHome MCIR Keyboard, Microsoft eHome MCIR 109 Keyboard and Microsoft eHome Remote Control Keyboard keys. My problem is that this driver has incompatibilities with some programs I use like for example DosBox. When these devices are installed, they cause DosBox to incorrectly detect some keyboard buttons. The workaround is to remove or disable the 3 hardware devices. Unfortunately, I the disable option is grayed out and when I delete them, they are reinstalled on next restart. Is there any way to hack windows in order to prevent their installation? I was thinking about locating the drivers these devices use, but they are buried somewhere in windows installation and I don't have enough experience to find them, so I'm asking you for help.

  Read the article

• Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

  - by Wawrzek

  Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

  Read the article

• How to PERMANENTLY disable touchpad tap-to-click on Dell Inspiron/Windows 7

  - by Graham

  Hi all - my first time here, so I hope you can help. I've seen a lot of stuff on various forums (including here) about disabling the annoying "tap" function on a laptop touchpad. I learned the hard way not to de-install the driver (as the software suggests), since you then loose the Synaptic tab in the mouse control settings, and with it all means to modify the touchpad settings ... indicentally, if this happens to you, reboot in safe mode and do a restore, and the synaptic tab comes back. Not ideal, I know, but it works. Anyway, I have the most up-to-date drivers, and I can go to the Synaptics tab and can disable the tap-to-click function no problem. However, next time the machine is booted, tap-to-click is back on. It can alsways be disabled, but it's pain having to reset it every time the mchine is powered up. Is there a way to permanently disable it, once and for all? Thanks in advance, Graham

  Read the article

• Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

  - by Alex

  I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

  Read the article

• VMWare Guest NIC Teaming

  - by Justin Popa

  We're looking to add additional bandwidth to a VM running on an ESXi cluster running 5.1. How can I team these within the VM? I suspect I need to add a second e1000 and then install some Intel software to team them. Any idea which version of Intel driver? Is there some better software to use? EDIT: Sorry, neglected some information. The guest OS is Win2k8R2. The physical NICs on the host are 1Gbps. The reason this has come up is we are seeing the VM hitting near cap on the capability of a single 1Gbps link (Usually at 100-110MBps, bursting to 130s, but I think that may just be a UI math lie) and we're interested in seeing if adding an additional NIC in a teamed setting will increase the overall throughput.

  Read the article

• Windows 8 Radeon update broke some games

  - by Andrew

  I've been using Windows 8 Consumer Preview 32-bit on my desktop for months, and recently did a software update through Windows Update. An update for my Radeon HD 5450 driver (Catalyst) to WDDM 1.2 was in the list of updates, and installed. When I went to play CS:GO and discovered that when loaded, it would not display the GUI (menus, sometimes even the background) after a few seconds of flickering GUI. I can still navigate the menus 'by feel' and connect to and play on servers, but have no GUI, no buy menu, no map, no cross-hairs, no health indicator, etc. I have tried CS:S, which works, and Borderlands, which doesn't even load the intro videos before the first menu screen. I've tried re-installing Catalyst from the AMD website, and the beta, and tried uninstalling and reinstalling CS:GO. The problem with it (and Borderlands) still happen. What broke, and how can I fix it? I'll be reinstalling soon anyway to dump Windows 8 back to 7, but would like to be able to game until then.

  Read the article

• How can I get 32-bit Direct3D working on my 64-bit Windows 7 system?

  - by Daniel Stutzbach

  I recently upgraded a Dell Inspiron 6400 to Windows 7 Ultimate 64-bit. I have a 32-bit 3D application that refuses to run, giving an error of "Failed to initialise [sic] Direct3D device". The dxdiag tool tells me: DirectDraw Acceleration: Enabled Direct3D Acceleration: Not Available However, the 64-bit version of dxdiag tells me: DirectDraw Acceleration: Enabled Direct3D: Enabled I have installed and re-installed the latest graphics drivers, as well as the DirectX 9 redistributable, but it stills fails in the same way. dxdiag reports the chipset name as the "Mobile Intel(R) 945 Express Chipset Family" with the the Chip Type as "Intel(R) GMA 950". The main driver is igdumd64.dll, version 8.15.10.1930. How can I get 32-bit Direct3D working?

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Intermittent freeze of Windows 7 x64 on laptop

  - by georged

  I have Lenovo W500, 8GB RAM, 250GB Crucial SSD running Windows 7 x64 using boot-to-vhd. Lately I started to experience some random freezes for 5-30 seconds. And when I say "freeze" I mean it; it's like a time machine - no input taken, nothing is written anywhere, no log, no disk activity. And then suddenly machine would wake up and continue as if nothing happened. I do suspect that it's one of the drivers but I don't see any updates in the log lately except for .NET 4 framework and Adobe Reader. Out of new or updated software I can only recall Skype and IE9 but freezes started to occur definitely before IE install. Regular software includes but not limited to: Office 2010, VMWare Workstation, IE9, Chrome, Skype, Seesmic/TweeterDeck, Live Writer. How should I approach the "hunting season" to find our the culprit? Any tools or packages that could help me to identify the component, program, driver that causes the freeze? Cheers

  Read the article

• Sound does not work on the administrator profile.Works on a non-administrator profile on Windows XP

  - by Sharjeel Sayed

  Initially I suspected a missing driver, but then sound ( for movies,songs etc ) works fine on the other non-administrator account, but does not work when I log in to the Administrator account. And yes..I have checked the sound volume and mute status as well. Details of my system OS: Windows XP Professional Service Pack 3 (build 2600) Processor: 2.00 gigahertz AMD Athlon 64 Memory: 448 Megabytes Usable Installed Memory Board: ASUSTeK Computer Inc. K8V-MX Bus Clock: 200 megahertz BIOS: American Megatrends Inc. 0112 07/18/2005 Multimedia: SoundMAX Integrated Digital Audio Any help would be appreciated.Thanks in advance

  Read the article

• Streaming video from a point-and-shoot camera that doesn't support it

  - by egasimus

  I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

  Read the article

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• How to disable "Automatically search for drivers and install" in Windows 7

  - by raegadfsgfsdg

  I connected my TI-89 to my Windows 7 system, and apparently it is not plug-and-play. There was a link to a Windows configuration setting made available that gave the option to automatically search their windows site for drivers and automatically install them each time i connect an unrecognized device. Well, I selected that link with the intention of it being temporary and just that one time. That didnt work and the location/install of a driver was not successful. How can I reset that setting to not automatically install whatever drivers it thinks might be fitting? I cannot find that configuration setting when I looked for it recently.

  Read the article

• Recommend a wireless PCI card for Windows 7

  - by Dan

  I have a crummy RT2500-based 11g card which does work in Win7 with the Vista driver (3.2.0.0) but it dies about every two hours or so. Googling around has led me to conclude that Ralink drivers are basically borked, and that I need something else for a stable connection. Can anyone recommend a suitable wireless adapter? It needs to be: 802.11g - draft-N nice but not at all essential. PCI - I already have far more USB devices than can possibly be good for me. Very reliable. Money isn't an object within reason. All input gratefully received!

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• Cursor moves when left or right clicking on trackpad

  - by n00b

  I'm on an acer aspire v5-572p. When I am using the touchpad, and I left or right click something, the cursor moves every time by a couple pixels because unfortunately the clicking area, is also a touch area. I've tried switching to the synaptics mouse drivers provided on the Acer driver website, but the same problem exist. I have researched this problem and there is a fix for this issue in Ubuntu, but I am running Windows 8.1 x64. The problem also existed when I was on 8.0 How do I stop the cursor from moving on a click?

  Read the article

• DHCP over WiFi on CentOS 6 [closed]

  - by dongle26

  Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

  Read the article

• On boot firmware request for intel GMA 3100 chipset timing out

  - by Yannick M.

  I am currently in the process of installing a Gentoo linux box with a Vanilla 2.6.29-r5 kernel with gentoo-xen-kernel patches in order to run the Xen Hypervisor. After rebooting with the new kernel, the booting process seemed to hang on: [ 0.863005] platform microcode: firmware: requesting intel-ucode/06-0f-07 [ 60.863442] Microcode Update Driver: v2.00-xen <[email protected]>, Peter Oruba Apparently the firmware request times out after 60 seconds (/sys/class/firmware/timeout) and booting just continues. I have done some research and have found that on RHEL-4 this problem was related to the mount of /sys changed and the firmware.agent hotplug script couldn't parse the line correctly. However I am having some difficulty tracking down how to fix this on Gentoo. Any and all ideas are greatly appreciated! Thanks

  Read the article

• Windows 7 Activation with Bootcamp and VMWare

  - by Jason Hernandez

  I have windows 7(64) installation setup on a Boot Camp partition on my MacBook Pro 13". I also access this partition through VMware hosted by OS X (snow leopard). Every time I switch between VMware and Boot Camp windows says that it needs to be re-activated because of hardware or driver changes. I've tried wmware KB KB 1003426 to no avail. Edo Thanks, Jason Edit, I am using the most recent VMware and tools. I've tried "KB 1004917" as well. No Dice. I'm considering re-installing at this point.

  Read the article

• Debian Lenny - network interfaces(eth) are in DOWN state

  - by pachanga

  Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >