Search Results

Search found 1337 results on 54 pages for 'capacity estimation'.

Page 29/54 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Choosing A Power Supply [closed]

  - by Geeks On Hugs

  Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

  Read the article

• Count total file size of many files in Windows

  - by user105249

  When I want to burn a CD R with lots of files, I have to make sure the total file size in my folder doesn't exceed the capacity of the disc (680MB). In Windows are there possibilities to check the total file size of a bunch of files. I put them in a folder, right-click and check the properties. But this is an annoying trial and error kind of way. Either there are too many files in the folder, or too little. I watch the file size go up as I keep selecting more files, using ALT+going down button. No. 2 is my favorite way to do it. Here's my question: For some reason Windows (I still use XP) only shows the total file size of 100 selected files. When you select more than 100 files, no file size information appears any more. Is there way, a trick, an app, to work around this problem?

  Read the article

• Massive amount of subfolders and long subfolders. ¿How can I delete all of them?

  - by Carlos

  Good day. We have a little problem here. We have a share with the backup of all the server's offices, Its a really big share with more than 8.000.000 files. Our users usually give long names to the folders they create, and then make subfolders (long too) and more subfolders... and more suboflders.... We have a new share with more capacity, and with a simpe robocopy bat we copied all the files and folders (some give problems, but we manually copied them) But the problem is deleting them. del command didnt work well when so long paths, neirder rmdir... I'm tried some commanders, but no luck. Can u recommend me any tool that can delete recursively or able to delete 255+ paths? Edited: The SO on background of the share it's NetApp OS. But I can access it from Windows Servers. 2000 and 2003 Thanks.

  Read the article

• Windows server 2008 UPS support

  - by Rory McCune

  I'm looking to set-up a UPS on a Windows Small Business Berver 2k8 and I've noticed that there are some large price differences for similar capacity in-line UPSs. The most important point for me in UPS selection is that the server should have the ability to shut itself down before the UPS power runs out, so that if the server is unattended during the outage, it should minimize the risk of data loss. From some reading it appears that Windows Server 2008 should has the ability to natively recognise a UPS, which can then be managed through the battery settings on the server or via WMI. What I'm wondering if anyone know is, Is Windows 2008 servers UPS support specific to certain brands of UPS (eg, APC) or is it likely to work with any UPS which has a USB port, which I can connect to the server?

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• Samba Server as domain controller

  - by garden air

  I am using centos 6.2 on my system. I want to make samba server as PDC to join the clients computers operating systems i.e xp,windows 7 and share their files & directories.Currently I have 200 PC running both windows xp and win 7. The question I want to as is does samba 3.5.10 has a capacity to join 200 computers as a domain controller & authenticate the users ? thanks garden Thanks for your guidence.Well at the moment I am using CentOS 6.2 and samba is installed using yum command. It is amazing that I can join samba as a domain comtroller of 200 clients machines. By the way what is samba maximum limit for joining number of clients PC's.

  Read the article

• monitor just what's going on -on a firewall

  - by bbutle01

  I have this little snapgear firewall. It's a little purpose built box running a custom linux, SH4 processor @240 Mhz, 64MB of ram. Basically how close we are to capacity is a mystery to me. I know I can run top and see the status of all the processes, but how can I see just how much of the processor is going to passing data... and how to estimate when I'm going to need to upgrade, and by tweaking iptables rules, how does that help/hurt the processor. suggestions?

  Read the article

• 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

  - by user136085

  I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• How to determine if a file has been backed up?

  - by Console

  I try to consolidate old drives to new ones of larger capacity. Sometimes files have been renamed, but are otherwise identical. Sometimes an old directory has just a few more files in it than a newer directory with the same name. Sometimes a file has the same name but the size differs. So I often find myself asking the question: Are there any files on this old drive or directory that I haven't already copied to the new drive? I just want to know that I have the files, I don't want to try and sync stuff automatically (Syncing tools tend to just sync, creating duplicate folder structures and other problems, so I prefer to do it by hand). Basically, if an old drive has a file called "foo.bar" ten directories deep, and my new big drive has an identical file called "oldstuff.zip" in the root, I just want a "yes you have it" or "no, unique files exist". Is there a free tool, a script or a quick and easy method (Mac/Unix or Windows) to get the answer?

  Read the article

• How can I accurately determine the age of a hard drive?

  - by Todd Stout

  Yes, if it's large, heavy, and only 65 Meg in capacity, you can assume it's ancient. An RLL controller would positively indicate the drive is from antiquity. What about drives that are only 3 or 4 years old? If I know the serial number, make and model is there a public database that indicates a manufacturing date? Update: As trite as this question might seem to some, the hard drive I was looking at that precipitated this question had no obvious manufacturing date stamped on it. I realize that most do. I think the answers given are very useful to myself and others.

  Read the article

• Disadvantages of enabling AHCI after Win7 install

  - by Mario De Schaepmeester

  I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

  Read the article

• Start a ZFS RAIDZ zpool with two discs then add a third?

  - by Doug S.

  Let's say I have two 2TB HDDs and I want to start my first ZFS zpool. Is it possible to create a RAIDZ with just those two discs, giving me 2TB of usable storage (if I understand it right) and then later add another 2TB HDD bringing the total to 4TB of usable storage. Am I correct or does there need to be three HDDs to start with? The reason I ask is I already have one 2TB drive I'm using that's full of files. I want to transition to a zpool but I'd rather only buy two more 2TB drives if I can. From what I understand, RAIDZ behaves similarly to RAID5 (with some major differences, I know, but in terms of capacity). However, RAID5 requires 3+ drives. I was wondering if RAIDZ has the same requirement. If I have to, I can buy the three drives and just start there, later adding the fourth, but if I could start with two and move to three that would save me $80.

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• Expanding RAID 1 array size (Adaptec 1420SA controller)

  - by cincura.net

  I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• Chromium OS Lime installation confusion

  - by Abhinav Kulshreshtha

  I Used to download Chromium Vanilla build Virtual-box image from hexxeh. recently i wanted to try Lime build which only gives a .img file. I used the mentioned Windows Image Writer (link given on the lime website.) and a 8GB Transcend Website. When i tried to boot from pen-drive, the screen only flashed and nothing happened. Now when i tried to access my pendrive, it shows only 0.99 gb capacity. What happened wrong. How can i recover my pendrive. I tried to create vdi using VBoxManage.exe convertdd chromiumos.img chromiumos.vdi command given in This link. But it is not running on VBox either.

  Read the article

• Symlink across local volumes in webroot?

  - by geerlingguy

  I am looking for a good short-term solution to storage space concerns on my website. Currently, I have all uploaded files (flash video, images, etc.) inside the 'files' directory in my web root (/home/account/public_html/files). That directory is located on my high-speed main hard drive (a 15k SCSI drive). I have another drive with much more capacity, but spinning at 10k rpm (so still fast, but not as good for random reads/writes as the main drive. The entire drive is mounted at /backup Right now I'm just using it as a backup volume. I would like to create a symlink from my /home/account/public_html/files folder to /backup/files, and have all files reside on the second drive. However, if someone accesses a file at http://www.example.com/files/filename.jpg, would it still work if I symlinked to the second drive? (Basically, would Apache/PHP automatically know to follow the symlink for that directory?).

  Read the article

• ext4: error loading journal

  - by cloudyOutside

  I have an external hard drive with two partitions: A small FAT32 which is mostly empty and works fine and a large ext4 with tons of data, most of which isn't backed up. The ext4 is visible, but can't be mounted. I get an "error loading journal" error. The drive is a Western Digital Caviar Blue 500GB. Roughly 30GB of that is FAT32 and the rest is the ext4. The light on the enclosure turns red when reading from the bad partition. It was made by Cavalry. There wasn't any warning, but coincidentally, I've been thinking lately that I should get two large capacity drives for real backups. Is there anything that can be done? I'm not even sure I have enough storage to backup everything even if it is redeemable.

  Read the article

• Lustre - is this bad form?

  - by ethrbunny

  Im going to be consolidating several 'server rooms' into a single installation soon. Part of this effort will be finding a home for 5Tb (and growing) of files / logs. To this end Im looking at Lustre and appreciating its ability to scale. The big vendors want to sell me a $20K SAN to manage this but Im wondering about buying several iSCSI units (like this http://www.asacomputers.com/3U-iSCSI-Solution.html) and using VMs for the OSS machines. This would let me fail-over to cover problems and not require a dedicated system for each OSS. Given articles like this (http://h30565.www3.hp.com/t5/Feature-Articles/RAID-Is-Dead-Long-Live-RAID/ba-p/1422) that talk about how RAID is not keeping up with drive density Im leaning towards more disks with lower capacity each. Again - some akin to the iSCSI array above. Tell me why this is a terrible idea. Do I really need to invest in a PE710 for each OSS/OST?

  Read the article

• How do I know if my disks are being hit with too many I/O reads or writes or both?

  - by Mark F

  I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. How do I really know what the max I/O numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an I/O bound problem. Is there a better way to predict when I/O is reaching its limits? This article was interesting but not giving the answer I desire. So, is my best bet surrounding just looking at 'CPU I/O WAIT'? There must be a more reactive method than this.

  Read the article

• Server 2012 Storage Pools, Raid Controller... can the Storage Pool deal with it?

  - by TomTom

  Before trying it out - I don't find any documentation. Given that Storage Pools have serious performance problems with parity, and do not rebalance data at the moment when you add discs, my preferred way to use them would be as think provisioned space, ISCSI targets - with every "Pool" running against 1 RAID that comes from a Raid controller (who also introduces SSD read and write caching - another thing missing from Storage Pools). The main question is - how does a Storage Pool handle the change in the underlying disc that can happen? I mostly talk about OCE (Online Capacity Expansion), where a disc after an expansion suddenly reports a larger space. Standard Windows allows you to use this additional space (and expand the partitions). How does a storage pool handle it?

  Read the article

• How to calculate required switch speed based on network usage?

  - by tobefound

  I have a 48 port HP Procurve Switch 2610 (J9088A) that can handle 13.0 million PPS (packets per second) and features wire speed switching capacity at 17.6Gbps. First off, what does that REALLY mean? Where do I start when trying to figure out if my office (with 70 employees) will be well setup with this switch? How to calculate through-put based on a user average load of X MB per day? 90% of the folks will only be sending email, access random websites, etc... the other 10% will be conducting heavier tasks like moving image files (10 MB) across network shares, constant external FTP streams through the switch to a server etc... Is this switch good enough?

  Read the article

• Amazon EC2 Web server in Load Balancer gives 503

  - by dale

  we've been running our web servers at Amazon with load balancer and auto-scaling for over a year with no problem. All of a sudden today the request began to get aborted with the error: 503 ... Backend server is at capacity The web servers are at 1% CPU and no other alarms trigger. We use Amazons load balancer and nginx. Lots of requests like this are showing up in the access_log. 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" Any thoughts?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >