Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 29/756 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• Why can't I access my own web server from my local network?

  - by frenetic

  I have a web server in my home network and I'm using ZoneEdit for dynamic DNS. It's accessible perfectly to everyone outside of my local network, but since I switched to a Gateway 2Wire DSL modem/router I'm unable to use the domain to access the server from my network. I can access it via a local IP or by putting it in my Windows hosts file but this is annoying to do on every computer and for every subdomain. Any idea how I can fix this? Thanks!

  Read the article

• Why can't I access my own web server from my local network?

  - by frenetic

  I have a web server in my home network and I'm using ZoneEdit for dynamic DNS. It's accessible perfectly to everyone outside of my local network, but since I switched to a Gateway 2Wire DSL modem/router I'm unable to use the domain to access the server from my network. I can access it via a local IP or by putting it in my Windows hosts file but this is annoying to do on every computer and for every subdomain. Any idea how I can fix this? Thanks!

  Read the article

• Sharing Windows Folders on a Network... other PCs see but can't access

  - by John

  I'm soooo tired of network setup issues. All I want to do is share a folder and all it's sub-folders so other PCs on my network can view and change this remote location. Why is it that setting a dir to "shared" doesn't actually make it usable in any way? The other PC can see the fodler but is unable to actually open it and look inside. It seems every time I want to do this I go through some semi-random process of right clicking the folder and enabling sharing, then looking in the folder properties to add permissions and other sharing... and then I end up with some folders working but others will randomly block permission on certain files or sub-dirs. I have 5 PCs in my local testing network and I cannot believe it should be this complicated... where is the simple "make this folder work on the network" option?! I have a mixture of XP, Vista & W7 machines, but this seems common to all of them.

  Read the article

• VS2008 with SP1 seems to have no connectivity

  - by Matt

  I am on a Win7 64 Enterprise machine. My machine has connectivity, everything is fine except for VS2008. It can't get news feeds or more importantly connect to TFS. Has anyone ever seen this?

  Read the article

• How can I make desktop.ini work on network locations?

  - by Eric

  I've got a simple desktop.ini file that applies a folder icon. I'd like it to work on a network location, as we have an external hard drive connected to our network. However, the desktop.ini seems to have no effect on said network. What am I doing wrong?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Is there a way to measure wifi traffic on a network from a client?

  - by millimoose

  Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

  Read the article

• Oracle Social Network in the Cloud - the videos

  - by me

  On June 6th  Larry Ellison announced the  Industry’s Broadest Cloud Strategy (Webcast – watch the replay) As part of the Oracle Cloud announcement Larry unveiled the Oracle Cloud Social Services, the most broad and complete enterprise social platform available in the cloud today. So you are wondering how these services look like?  Here are a few videos which shows Oracle Social Network in action. Enjoy ! PS:  Larry recently joint the Twitterverse and did his ever first tweet on June 6th. In a few days he got 25,000 followers and a Klout score of 61. I wish he would follow me Connect with Oracle Social Network   Oracle Social Network: Getting Started Oracle Social Network: Conversation Basics  Oracle Social Network: Notifications and Preferences  Oracle Social Network: Basics of Chats

  Read the article

• Network doesn't work after upgrading to 13.10

  - by Inkbug

  I upgraded from 13.04 to 13.10, and a number of things stopped working. Most importantly, I don't have internet access anymore. When I go to the network settings, I receive the following error: The system network services are not compatible with this version. The only settings that show up in the network settings are the proxy settings. I tried sudo service network-manager start and sudo service network-manager restart, but it told me the service was already running. In addition, the menu bar is missing all of the indicators (such as keyboard layout, sound, network, clock, and the gear icon). Is this related or a separate issue?

  Read the article

• Artificial neural network

  - by naveena

  hai this is naveena My guide given a simple example to solve in artificial neural network and PSO If any body help then i m very happy the example is `A B C a1 b1 c1 a2 b2 c2 how i have to solve manually i cannot understand plz any help me and send a mail to this id plz [email protected]

  Read the article

• Converting CIDR address to subnet mask and network address

  - by Dmitry

  Given a CIDR address, e.g. 192.168.10.0/24 How to determine mask length? (24) How to determine mask address? (255.255.255.0) How to determine network address? (192.168.10.0)

  Read the article

• How to implement the activity stream in a social network

  - by Nicolò Martini

  I'm developing my own social network, and I haven't found on the web examples of implementation the stream of users' actions... For example, how to filter actions for each users? How to store the action events? Which data model and object model can I use for the actions stream and for the actions itselves?

  Read the article

• is there any scala network library with actor model

  - by kula

  hi all i'm now to scala. i need a network library with actor model. or the best choise is java.nio?

  Read the article

• Looking for a virtual network adapter (virtual interface controller)

  - by Dawn

  I need a software that simulates a network adapter. I need the virtual adapters will be able to communicate with each other. For example, if I i have 2 virtual adapter (on the same computer): interface1-1.1.1.1 and interface2-1.1.1.2. I want the packets that will be send through interface1 will be received in interface2. I have as an option to install VMWare server, but i prefer something more specific. anyone have ideas?

  Read the article

• Monitor Network Traffic Mac

  - by Tom Irving

  I'm wondering how to go about monitoring network traffic on my Mac. Like the way activity monitor does it, showing the bytes / packets in and out. I know it's a bit vague, but I'm unsure of the best place to start.

  Read the article

• Java and CIDR (network address)

  - by Dmitry

  If given subnet address e.g. 192.168.10.0/24 How to determine mask length ? (/24) How to determine mask address ? (255.255.255.0) How to determine network address ? (192.168.10.0)

  Read the article

• ASP.Net File Upload Network Issue

  - by John Delate

  I have tried both the .net FileUpload control and the ajax Asyncfileuploadcontrol to upload a file less than 500kb. It seems that when I tried to go through my wireless router (att.bellsouth) that the uploads always fail, however when I plug my droid into my laptop and use my pda connection it works perfectly fine. I'm wondering if the network connection from my house to my server could be causing this issue, and if anyone had any solutions to this problem. Tomorrow I'm going to try and upload from other networks and pray it works.

  Read the article

• Accessing wireless network through terminal in ubuntu

  - by suad.al.darra

  I'm connected to a wireless network and it's working fine on browser but not on terminal. I'm getting a timeout error when i'm trying to download any plugin for ruby

  Read the article

• How to choose which Network interface to use?

  - by ShaChris23

  I use Qt for my TCP communication. If my PC has 2 network interfaces (say eth0, eth1), and say I want to explicitly use eth1, how do I do that in Qt?

  Read the article

• Network file transfer in Windows

  - by Arman

  I want to transfer files across the network using C or C++. What topics should I look up? How can I do this?

  Read the article

• Decision region plot for neural network in matlab

  - by Taban

  I have a neural network trained with backpropagation algorithm. I also create data set (input and target) random. Now I want to plot a decision region where each region is marked with a red star or with a blue circle according to whether it belongs to class 1 or -1. I searched a lot but just find plotpc function that is for perceptron algorithm. What should I try now? Any link or answer really helps. Thanks

  Read the article

• Check whether a folder is a local or a network resource in .NET

  - by rwmnau

  Is there a quick way to check whether a path I have is on a local disk or somewhere on the network? I can't just check to see if it's a drive letter vs. UNC, because that would incorrectly identify mapped drives as local. I assumed it would be a boolean in the DirectoryInfo object, but it appears that it's not. I've found classic VB code to do this check (through an API), but nothing for .NET so far.

  Read the article

• listing network shares with python

  - by Gearoid Murphy

  Hello, if I explicitly attempt to list the contents of a shared directory on a remote host using python on a windows machine, the operation succeeds, for example, the following snippet works fine: os.listdir("\\\\remotehost\\share") However, if I attempt to list the network drives/directories available on the remote host, python fails, an example of which is shown in the following code snippet: os.listdir("\\\\remotehost") Is anyone aware of why this doesn't work?, any help/workaround is appreciated.

  Read the article

• python intercepting network data

  - by nabizan

  for example you run some client program, this program communicate with server to recieve data in realtime ... how can i listen to this network traffic and filter / store data in python?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >