Search Results

Search found 42307 results on 1693 pages for 'solid works'.

Page 293/1693 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Paranormal activity in My Pictures folder: Thumbnail doesn't match actual picture.

  - by Sam152

  After finding an amusing picture on a popular imageboard, I decided to save it. A few days past and I was browsing my images folder when I realised that the thumbnail generated by Windows XP in the thumbnails view did not match the actual image. Here is a comparison image: What's even stranger in this situation is that the parts of the photograph that are different have actually been replaced with what might be the correct background. Furthermore, it is a jpeg (no PNG transparency tricks) that is 343 kilobytes but only 847x847 pixels wide. What could be going on here? Could there be anything malicious in the works, or hidden data? Before anyone asks, I have checked and preformed the following: Deleted Thumbs.db to reload thumbnails. Opened image in different editors. (they appear with the text) Moved image to a different directory. Changed the extension to .rar. All these steps produce the same results. Pre actual posting update: It seems that opening the image in paint, changing the image entirely (deleting entire contents and making a red fill) will still generate the original thumbnail, even after deleting Thumbs.db etc. I'm also hesitant to post the original data, in case there is something malicious or hidden that could be potentially illegal. (Although it would be very beneficial to see if it works on other computers and not just my own).

  Read the article

• Autossh startup on Ubuntu 10.04 - fails after powering off

  - by grant

  I'm using upstart to keep a reverse ssh tunnel alive using auto ssh similar to Using Upstart to Manage AutoSSH Reverse Tunnel. This works fine, except after a manual power down I can no longer connect to the machine through the "central server" using the tunnel. I receive "ssh_exchange_identification: Connection closed by remote host". The autossh process is running on the client. I can connect again after re-starting networking. I'm trying to figure out why this is failing consistently after a manual shutdown. Is it possible that I need to do some cleanup on startup that would allow the tunnel to work in this situation, or are there some other debugging/troubleshooting steps I can take to determine the problem? Machine A is the client machine, using autossh. This machine sits behind a firewall and uses the following command in upstart to create an ssh tunnel: /usr/bin/autossh -fN -i /keyfile -o StrictHostKeyChecking=no -R 20098:localhost:22 user@centralserver Machine B we'll call the "central server", which sits in the cloud and is the host. This machine is "centralserver" in the command above. When Machine A is hard powered off, and back on, I cannot connect to it by SSH'ing from my machine (C) to Machine B in the cloud, then using the following command to get to Machine A: ssh -p 2098 user@localhost Again, after a reboot of the client (A), this works fine. It is only after a hard power down that the problem occurs. There are autossh processes that are running on the client machine (A) after powering down and back up, but they just don't seem to doing their job.

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

• I can't change mysql port (5.6.12) changing the lines of my.ini (windows 8)

  - by videador

  I was trying to change the port of my mysql server in my local machine but i can't. The version of mysql is 5.6.12, is an installation from wamp and I am on Windows 8. I change these lines in my my.ini file located in (C:\wamp\bin\mysql\mysql5.6.12). [client] #password = your_password port = 3307 socket = /tmp/mysql.sock [wampmysqld] port = 3307 socket = /tmp/mysql.sock key_buffer = 16M max_allowed_packet = 1M The previous values were 3306. Ok then I've reset the server installed, but it doesn't works, the mysql server is still running on 3306. Then, I rename the path of the services with this, to make sure that the my.ini is read by the mysql instance. c:\wamp\bin\mysql\mysql5.6.12\bin\mysqld.exe --defaults-file="C:\wamp\bin\mysql\mysql5.6.12\my.ini" wampmysqld But nothing, it stil doesn't works. My last bullet was to copy the content of my.ini to a file my-default.ini (a file that is placed in C:\wamp\bin\mysql\mysql5.6.12\ and that I don't know what is its mission). However it still doesn't work and the port is still 3306.

  Read the article

• Issues with "There is already an object named 'xxx' in the database'

  - by Hoser

  I'm fairly new to SQL so this may be an easy mistake, but I haven't been able to find a solid solution anywhere else. Problem is whenever I try to use my temp table, it tells me it cannot be used because there is already an object with that name. I frequently try switching up the names, and sometimes it'll let me work with the table for a little while, but it never lasts for long. Am I dropping the table incorrectly? Also, I've had people suggest to just use a permanent table, but this database does not allow me to do that. create table #RandomTableName(NameOfObject varchar(50), NameOfCounter varchar(50), SampledValue decimal) select vPerformanceRule.ObjectName, vPerformanceRule.CounterName, Perf.vPerfRaw.SampleValue into #RandomTableName from vPerformanceRule, vPerformanceRuleInstance, Perf.vPerfRaw where (ObjectName like 'Processor' AND CounterName like '% Processor Time') OR(ObjectName like 'System' AND CounterName like 'Processor Queue Length') OR(ObjectName like 'Memory' AND CounterName like 'Pages/Sec') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk Queue Length') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk sec/Read') OR(ObjectName like 'Physical Disk' and CounterName like '% Disk Time') OR(ObjectName like 'Logical Disk' and CounterName like '% Free Space' AND SampleValue > 70 AND SampleValue < 100) order by ObjectName, SampleValue drop table #RandomTableName

  Read the article

• The requested operation has failed! (cannot find answer)

  - by Geoff

  I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

  Read the article

• Is my current htaccess setting hurting SEO?

  - by user656002

  I have a site that I have redirecting to https. I do this to leverage wildcard SSL for my password protected pages. Everything seems to work fine with testing. For example, whether you type in http or www, you always get redirected to the SSL https... That said, I have about 200-300 external backlinks -- many high quality, yet google webmaster (along with SEOMoz), shows I have just 4... Huh? I'm embarrassed to say I just discovered this. This has led me to hypothesize that maybe my settings in htaccess is messed up, so google isn't recognizing a link because it's recorded on another site as http, instead of https. Maybe? At any rate, here is my simple htaccess setting for 301 www to http (The https redirect must be done inside the virtual host file--I think). I don't have anything in the htaccess file for https RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [L,R=301] Like I said, everything works fine for redirect over https, so I'd rather not screw up what works. On the other hand something is very wrong with google finding all my back links, so I need to fix something... I'm just wondering that maybe google isn't picking up a my backlinks from other websites recording me as http because I'm at https. Maybe google doesn't care and it's some other issue. Am I barking up the right tree? If so any quick fixes? Thanks as always!

  Read the article

• Passenger and ServerAlias not cooperating

  - by Pyzo

  I have a ruby application that runs on a server with multiple IP addresses and mutliple vhosts. Here is the configuration of the problematic virtual host: <VirtualHost 10.0.0.10:80> ServerName realname.example.com ServerAlias alias.example.com DocumentRoot /var/www/sites/example/current/public <Directory /var/www/sites/example/current/public> AllowOverride all Options -MultiViews </Directory> ErrorLog /var/log/httpd/example_error_log CustomLog /var/log/httpd/example_access_log common RailsEnv production RackEnv production </VirtualHost> When I pull up realname.example.com the Ruby on Rails application works correctly. On the other hand alias.example.com just gives me Not Found: / I'm fairly certain the correct vhost is getting used because alias.example.com produces a 404 in the correct log file. I've tried adding logging to the Passenger config and it seems to indicate that Passenger is getting the request. Note: I can't redirect alias.example.com to realname.example.com. realname is accessed using a CDN, whereas alias is directly accessed. Anyone have any ideas why this isn't working? I've been banging my head for days and I've got a similar configuration in QA that works as expected.

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• How can I ensure that my static ip address is read from /etc/network/interfaces rather than dhcp?

  - by jonderry

  This is a follow up to the following question. I'm trying to set a static IP by changing /etc/network/interfaces to the following: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.133 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 8.8.8.8 and then running /sbin/ifdown eth0; /sbin/ifup eth0. However, the change in IP address doesn't appear to take effect without editing /etc/dhcp/dhclient.conf and commenting out the following before running ifdown; ifup: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, dhcp6.name-servers, dhcp6.domain-search, netbios-name-servers, netbios-scope, interface-mtu, rfc3442-classless-static-routes, ntp-servers, dhcp6.fqdn, dhcp6.sntp-servers; Strangely, after commenting out this line, running ifdown; ifup works, but when I uncomment it, the behavior does not revert to the previous behavior of ignoring changes to my settings in /etc/network/interfaces (this doesn't seem like a problem, but I really need to be able to repeat this problem so that I can be confident that my solution is robust) Also, I'd rather not have to edit /etc/dhcp/dhclient.conf to change my static IP since it seems I should be able to do this by only editing interfaces. Can anyone explain the issues I'm seeing above and suggest the best way of making changes to static IP addresses take effect that admits reproducibility so that I can be sure that my approach works?

  Read the article

• Apache in MAC OS X

  - by Michal K.

  I have problems with apache on MAC OS Lion 10.7.5. I have VirtualHosts: <VirtualHost *:80> ServerName devel.dev DocumentRoot /var/www </VirtualHost> <VirtualHost *:80> ServerName test.dev DocumentRoot /var/www <Directory "/var/www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have configured httpd.conf to ServerRoot = /usr/htdocs (empty directory). test.dev and devel.dev says always "It works!". Why ? In /var/www I have index.php which contains only one letter "k" (for tests). Edit, more info: I have restart apache milion times. File with VirtualHosts is included. error.log: [Tue Oct 02 20:03:55 2012] [notice] caught SIGTERM, shutting down [Tue Oct 02 20:03:55 2012] [warn] mod_bonjour: Cannot stat template index file '/System/Library/User Template/English.lproj/Sites/index.html'. [Tue Oct 02 20:03:55 2012] [notice] Digest: generating secret for digest authentication ... [Tue Oct 02 20:03:55 2012] [notice] Digest: done [Tue Oct 02 20:03:55 2012] [notice] Apache/2.2.22 (Unix) DAV/2 PHP/5.3.15 with Suhosin-Patch configured -- resuming normal operations When I stop apache, localhost still displays It works!

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• How i can setup a nginx cache strategy that first try amazon s3, then memcache and do a fallback on miss?

  - by Tim

  i have a large site with lot of pages that almost never change, right now i am using two memcache servers (amazon elasticache), but this its really expensive. Thats why for this files that barely never change i want to upload them to amazon s3 and shutdown 1 memcache server. Here is my conf; location ~ /longterm/(.*){ proxy_pass http://amazonS3bucket; proxy_intercept_errors on; proxy_next_upstream http_404; error_page 404 503 = @fallback_memcached } location @fallback_memcache { set $memcached_key $uri; memcached_pass name:11211; error_page 404 @fallback; } location @fallback { try_files $uri $uri/index.html } I dont know why but the config doesnt work on the final fallback; if i got an amazon S3 hit it works, if i got an amazon S3 miss and a memcache hit it works, but if i got an amazon S3 miss then a memcache miss when it try to resolve the las fallback it fails. I am also thinking in use the amazon s3 fuse http://code.google.com/p/s3fs/ instead of the proxy pass i think it would be easier for implement, i would also be less performant?

  Read the article

• Proper Rules For SSL Redirect For Subdomains

  - by Zac Cleaves

  RewriteCond %{HTTP_HOST} ^(.*\.)*subexample.example.com$ [NC] RewriteCond %{SERVER_PORT} !^443$ RewriteRule ^(.*)$ https://subexample.example.com/$1 [R] Is what I have been using. It works as long as I go to a specific page, like subexample.example.com/orders.php. But if you try to go to the root of the subdomain, it adds the extra "/example" at the end. Any suggestion on a set of rules that will work? Thank you so much for your responces! Actually, this is what I am trying to do: http://support.mydomain.net >> https://support.mydomain.net AND(!) http://support.mydomain.net/anypage* >> https://support.mydomain.net/anypage* > RewriteCond %{HTTPS} off RewriteRule (.*) > https://%{HTTP_HOST}%{REQUEST_URI} Works, except I need it to only do it for the support.mydomain.net With the above set up, you get a certificate warning if you try to go just mydomain.net, which I do not have or need an SSL certificate installed on. UPDATE! The other issue with the rule I have written above, is that if you try to go to the root of the subdomain (i.e. support.mydomain.net) it goes to https://support.mydomain.net/support This is driving me crazy, help! =) Any help would be greatly appreciated!

  Read the article

• Variable host IP address in iptables rule

  - by DrakeES

  I am running CentOS 6.4 with OpenVZ on my laptop. In order to provide Internet access for the VEs I have to apply the following rule on the laptop: iptables -t nat -A POSTROUTING -j SNAT --to-source <LAPTOP_IP> It works fine. However, I have to work in different places - office, home, partner's office etc. The IP of my laptop is different in those places, so have to alter the rule above each time I change place. I have created a workaround which basically determines the IP and applies the rule: #!/bin/bash IP=$(ifconfig | awk -F':' '/inet addr/&&!/127.0.0.1/{split($2,_," ");print _[1]}') iptables -t nat -A POSTROUTING -j SNAT --to-source $IP The workaround above works. I only still have to execute it manually. Perhaps I could make it a hook executing whenever my laptop obtains an IP address from DHCP - how can I do that? Also, I am just wondering if there is an elegant way of getting it done in the first place - iptables? Maybe there is a syntax allowing to specify "current hardware ip addres" in the rule?

  Read the article

• Different behaviour when running exe from command prompt than in windows

  - by valoukh

  Forgive me if I'm not using the correct terminology here but I'll try to explain the issue I'm having as best I can! We use a program that allows you to view video footage from several cameras, and it works in such a way that when it is opened it then automatically loads several video files within its interface. These video files are stored in a subfolder, e.g. "videos\video1.asf", etc. I didn't create the program so I can't say what method it uses to open the files. The files are stored on a network server and are being accessed via a share/UNC path. When the file is run from windows explorer (by navigating to the network share and double-clicking the exe), it works perfectly. When the file is run via the (elevated) command prompt (e.g. by typing the \server\path\to\file.exe) it opens, but the corresponding video files do not load. I am trying to create a script that launches the program via the command prompt, so the first step is finding out why the two actions above have different consequences. Any advice on how running executables from the command prompt could produce a different result would be greatly appreciated. Thanks

  Read the article

• Can I split one ethernet line coming out of my wall into multiple separate lines?

  - by Burteçin 'Turk' Sapta

  Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

  Read the article

• NGINX + PHP-FPM - Strange issue when trying to display images via php-gd / readfile - Connection wont terminate

  - by anonymous-one

  Ok, to get the details out of the way: The php script can be anything as simple as: <? header('Content-Type: image/jpeg'); readfile('/local/image.jpg'); ?> When I try to execute this via nginx + php-fpm what happens is the image shows up in the browser, here is what happens: IE - The page stays blank for a long period of time, and eventually the image is shown. Chrome - The image shows, but the loading spinner spins and spins for a long period of time. Eventually the debugger will show the image in red as in error, but the image shows up fine. Everything else on the server works great. Its pushing out about 100mbit steady serving static content. So this is definatly a php-fpm related issue. I THINK this may have something to do with the chunked encoding being sent back wrong? Also, I threw in a pause before the image was read, and got the pid of the fpm process, and it looks as tho its terminatly correctly (from strace): shutdown(3, 1 /* send */) = 0 recvfrom(3, "\1\5\0\1\0\0\0\0", 8, 0, NULL, NULL) = 8 recvfrom(3, "", 8, 0, NULL, NULL) = 0 close(3) = 0 The above was dumped long before ie/chrome decided to give up (even tho the image was shown) loading the image. Displaying HTML / text content is fine. Big bodies etc all load nice and fast and terminate right away (as they should). Doing something like: THIS IS THE IMAGE ---BINARY DUMP OF IMAGE--- Works fine too. Any ideas?

  Read the article

• Compiz and Desktop Effects on Netbook with External Monitor

  - by Nerdfest

  I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off. I've seen a few mentions of this problem on the Ubuntu forums, but never a solid solution. Any ideas? A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB). In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.

  Read the article

• Cannot access Domain Controller through VPN

  - by Markus

  In our small network there is a Windows 2008 R2 Domain Controller that also serves as Remote Access Server. For years, we could access this server and the resources in the network over a VPN connection without any problem. Since some time however, I am able to connect to the VPN, but my Windows 8 client (and another one I used for testing purposes) is not able to connect the domain controller afterwards. I can access any other server in the network, but there seems to be a problem regarding the trust between the client(s) and the server. If I connect the client to the network directly over a LAN cable, everything works as expected. Also I can connect to another server over VPN and open a RDP prompt to the DC without a problem. On the client, whenever I try to access the DC, I get an access denied message. I've tried to update the group policies both over VPN and LAN. Also, I've removed the client from the domain and re-added it. The client shows a message that Windows requires valid login information when connected to the VPN - but my credentials are valid. They work when I logon to the client when not connected to the VPN and also when connected to the LAN. Turning off the firewall on the client and the server did not change anything. DNS resolution works both on the server and the client. What else can I do to diagnose and solve the problem?

  Read the article

• Older monitor not working with HDMI to DVI cable (from ultrabook)

  - by ShellfishGene

  I have a Lenovo Yoga ultrabook which only has a HDMI port. I bought an HDMI to DVI cable, and it works as expected with a LG monitor in my office. As soon as I plug it in the screen is cloned. At home I have an older Dell UltraSharp 2005fp, and for that one it does not work. When I plug the cable in "something" happens, the monitor goes from the "no signal" screen to black. On the laptop however nothing happens. In the Windows 8 display setup I don't have another monitor, clicking "detect" does not find one either. I can manually set a second display for cloning or extending, but never get a picture on the Dell. Connecting my media player thing with the cable to the Dell monitor works for when the player displays it's logo at a low resolution, but when it goes into 750p mode after booting the picture also goes away. Mabye that's due to HDCP though. Any ideas? Something to do with Windows 8, or DVI versions?

  Read the article

• What ports, besides 80, need to be available to send (only send) email using phpmailer to gmail over SSL?

  - by Wobblefoot

  Using phpmailer I keep getting a 110 timeout and "Unable to connect to host" when sending email from my web server. The authentication details are right and they work on another server I have (login, pwd, ports etc and gmail acct set up for SSL connections on 465), but it's failing on my new server. FIREWALL: I allow related/established, port 80 and a port for SSH on INPUT, then this on OUTPUT: 7906 474K DROP tcp -- any any anywhere anywhere tcp dpt:smtp 0 0 ACCEPT tcp -- any any localhost.localdomain yw-in-f109.1e100.net tcp dpt:submission 0 0 ACCEPT tcp -- any any localhost.localdomain gx-in-f109.1e100.net tcp dpt:ssmtp 0 0 DROP tcp -- any any anywhere anywhere tcp dpt:submission 9 540 DROP tcp -- any any anywhere anywhere tcp dpt:ssmtp This output chain works on my other server and disabling it doesn't get mail delivered either. WEB SERVER: Varnish (80) Nginx (8088) Drupal 7 PHP5-FPM APC MySQL All works beautifully, except for outgoing email. What else could it be? I understand phpmailer does NOT require a local MTA or procmail (this is sort of the point - I don't want the security or admin overhead of a full blown MTA on my web server). Am I wrong? Do I need an MTA as well? What local ports and programs are used to authenticate over SSL and route mail using phpmailer? Any ideas at all greatly appreciated - wasted a day on this nonsense already!

  Read the article

• Windows 7, network transmit (send) not working

  - by user326287

  My Win 7 works 2 years without problem. But now, I can't transmit (send) big data on LAN/Internet. I can: - Ping anything - Browse Internet, download files at full speed - Send e-mails with very small attachments. - Testing download speed on Speedtest.net, measure stable full speed. I can't: - Testing upload speed on Speedtest.net. Upload stuck.. - Save/send email messages with big (128k) attachment, independent from e-mail provider or e-mail box. THIS IS NOT A HARDWARE/CABLE/CARD OR OTHER NETWORK DEVICES PROBLEM! When I boot from a Linux Live CD, without ANY hardware change, all data sending, testing works correctly, at full speed. I have tried already in Win 7: - Disable Windows/3rd party Firewall completely - Reset IP stack parameters (netsh int ip reset c:\resetlog.txt) - Computer restore - Reinstall LAN driver When I inspect the packets in Wireshark in Windows, I see lot's of (maybe 60% of sent packets) "TCP Retransmission". Sometimes receive "TCP Dup Ack" or "TCP Out-of-Order". Linux don't do this. Thank you for the help.

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >