Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 293/361 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• 3rd Party Tools: dbForge Studio for SQL Server

  - by Greg Low

  I've been taking a look at some of the 3rd party tools for SQL Server. Today, I looked at DBForge Studio for SQL Server from the team at DevArt. Installation was smooth. I did find it odd that it defaults to SQL authentication, not to Windows but either works fine. I like the way they have followed the SQL Server Management Studio visual layout. That will make the product familiar to existing SQL Server Management Studio users. I was keen to see what the database diagram tools are like. I found that the layouts generated where quite good, and certainly superior to the built-in SQL Server ones in SSMS. I didn't find any easy way to just add all tables to the diagram though. (That might just be me). One thing I did like was that it doesn't get confused when you have role playing dimensions. Multiple foreign key relationships between two tables display sensibly, unlike with the standard SQL Server version. It was pleasing to see a printing option in the diagramming tool. I found the database comparison tool worked quite well. There are a few UI things that surprised me (like when you add a new connection to a database, it doesn't select the one you just added by default) but generally it just worked as advertised, and the code that was generated looked ok. I used the SQL query editor and found the code formatting to be quite fast and while I didn't mind the style that it used by default, it wasn't obvious to me how to change the format. In Tools/Options I found things that talked about Profiles but I wasn't sure if that's what I needed. The help file pointed me in the right direction and I created a new profile. It's a bit odd that when you create a new profile, that it doesn't put you straight into editing the profile. At first I didn't know what I'd done. But as soon as I chose to edit it, I found that a very good range of options were available. When entering SQL code, the code completion options are quick but even though they are quite complete, one of the real challenges is in making them useful. Note in the following that while the options shown are correct, none are actually helpful: The Query Profiler seemed to work quite well. I keep wondering when the version supplied with SQL Server will ever have options like finding the most expensive operators, etc. Now that it's deprecated, perhaps never but it's great to see the third party options like this one and like SQL Sentry's Plan Explorer having this functionality. I didn't do much with the reporting options as I use SQL Server Reporting Services. Overall, I was quite impressed with this product and given they have a free trial available, I think it's worth your time taking a look at it.

  Read the article

• A big flat text file or a HTML site for language documentation?

  - by Bad Sector

  A project of mine is a small embeddable Tcl-like scripting language, LIL. While i'm mostly making it for my own use, i think it is interesting enough for others to use, so i want it to have a nice (but not very "wordy") documentation. So far i'm using a single flat readme.txt file. It explains the language's syntax, features, standard functions, how to use the C API, etc. Also it is easy to scan and read in almost every environment out there, from basic text-only terminals to full-fledged high-end graphical desktop environments. However, while i tried to keep things nicely formatted (as much as this is possible in plain text), i still think that being a big (and growing) wall of text, it isn't as easy on the eyes as it could be. Also i feel that sometimes i'm not writing as much as i want in order to avoid expanding the text too much. So i thought i could use another project of mine, QuHelp, which is basically a help site generator for sites like this one with a sidebar that provides a tree of topics/subtopics and offline full text search. With this i can use HTML to format the documentation and if i use QuHelp for some other project that uses LIL, i can import LIL's documentation as part of the other project's documentation. However converting the existing documentation to QuHelp/HTML isn't a small task, especially when it comes to functions (i'll need to put more detail on them than what currently exists in the readme.txt file). Also it loses the wide range of availability that it currently has (even if QuHelp's generated code degrades gracefully down to console-only web browsers, plain text is readable from everywhere, including from popular editors such as Vim and Emacs - i had someone once telling me that he likes LIL's documentation because it is readable without leaving his editor). So, my question is simply this: should i keep the documentation as it is now in the form of a single readme.txt file or should i convert it to something like the site i mentioned above? There is also the option to do both, but i'm not sure if i'll be able to always keep them in sync or if it is worth the effort. After asking around in IRC i've got mixed answers: some liked the wide availability of the single text file, others said that it is looks as bad as a man page (personally i don't mind that - i can read man pages just fine - but other people might have issues reading them). What do you think?

  Read the article

• SQL SERVER – Storing 64-bit Unsigned Integer Value in Database

  - by Pinal Dave

  Here is a very interesting question I received in an email just another day. Some questions just are so good that it makes me wonder how come I have not faced it first hand. Anyway here is the question - “Pinal, I am migrating my database from MySQL to SQL Server and I have faced unique situation. I have been using Unsigned 64-bit integer in MySQL but when I try to migrate that column to SQL Server, I am facing an issue as there is no datatype which I find appropriate for my column. It is now too late to change the datatype and I need immediate solution. One chain of thought was to change the data type of the column from Unsigned 64-bit (BIGINT) to VARCHAR(n) but that will just change the data type for me such that I will face quite a lot of performance related issues in future. In SQL Server we also have the BIGINT data type but that is Signed 64-bit datatype. BIGINT datatype in SQL Server have range of -2^63 (-9,223,372,036,854,775,808) to 2^63-1 (9,223,372,036,854,775,807). However, my digit is much larger than this number. Is there anyway, I can store my big 64-bit Unsigned Integer without loosing much of the performance of by converting it to VARCHAR.” Very interesting question, for the sake of the argument, we can ask user that there should be no need of such a big number or if you are taking about identity column I really doubt that if your table will grow beyond this table. Here the real question which I found interesting was how to store 64-bit unsigned integer value in SQL Server without converting it to String data type. After thinking a bit, I found a fairly simple answer. I can use NUMERIC data type. I can use NUMERIC(20) datatype for 64-bit unsigned integer value, NUMERIC(10) datatype for 32-bit unsigned integer value and NUMERIC(5) datatype for 16-bit unsigned integer value. Numeric datatype supports 38 maximum of 38 precision. Now here is another thing to keep in mind. Using NUMERIC datatype will indeed accept the 64-bit unsigned integer but in future if you try to enter negative value, it will also allow the same. Hence, you will need to put any additional constraint over column to only accept positive integer there. Here is another big concern, SQL Server will store the number as numeric and will treat that as a positive integer for all the practical purpose. You will have to write in your application logic to interpret that as a 64-bit Unsigned Integer. On another side if you are using unsigned integers in your application, there are good chance that you already have logic taking care of the same. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Datatype

  Read the article

• Installation issue after 4 attempts

  - by SixTen

  Have successfully installed Ubuntu 12.10 on 2 laptops, one running Vista & one running Windows8. Made 4 attempts (long downloads of WUBI.EXE) to different HD's & still NO GO. The machine is an older machine with Windows2000Professional installed & running. The system has 3 hard drives; C:(20.5 Gb with 7.26Gb Free), D: (74.5 Gb with 33.1 Gb Free), & E: (35.3 Gb with 24.8 Gb Free) which all have Gigabytes space available; also an A: 3 1/2floppy drive and a CD-drive burner. The CPU processor is older but seems sufficient: AMD Athlon XP 1700+ and the task manager of Windows2000 shows the processor works fine.. The flat-screen display works fine. Here is the error message I receive each time the 'installation configuration' is verified: "No root file system is defined" "Please correct this from partitioning menu" << The Ubuntu operating system is allowing me a couple of options at the very top right menu. I was able to establish a wireless connection but the MAIN homepage won't load with FIREFOX app or any other apps. I cannot access or even find any 'Partitioning Menu" from the displayed page. I cannot access files or Windows Explorer to view drives since I'm not using the Windows O/S. If I try to go back & re-install the UBUNTU 12.10 again, it always asks me to UNINSTALL the one found on the HD & then I run WUBI.EXE again which takes a long time for the download. Do I need to go back into Windows2000 & use Windows Explorer to look at the file structure & add a partition? On previous attempts I have tried loading the WUBI.EXE on all 3 HD's C: D: & E: Sure is frustrating?? Thanks for any suggestions. NEW UBUNTU user & what I've seen so far I like.. (J.R.)

  Read the article

• Producing a smooth mesh from density cloud and marching cubes

  - by Wardy

  Based on my results from this question I decided to build myself a 3D noise map containing float values in place of my existing boolean point values. The effect I'm trying to produce is something like this, rather than typical rolling hills; which should explain the "missing cubes" in the image below. If I render my density map in normal "minecraft mode" (1 block per point in the density map) varying the size of the cube based on the value in my density map (floats in the range 0 to 1) I get something like this: I'm now happy that I can produce a density map for the marching cubes algorithm (which will need a little tweaking) but for some reason when I run it through my implementation it's not producing what I expect. My problem is that I'm getting something like the first image in this answer to my previous question, when I want to achieve the effect in the second image. Upon further investigation I can't see how marching cubes does the "move vertex along the edge" type logic (i.e. the difference between the two images on my previous link). I see that it does do some interpolation, but I'm not convinced I have the correct understanding of what I think it should do, because the code in question appears to give the same result regardless of whether I use boolean or float values. I took the code from here which is a C# implementation of marching cubes, but instead of using the MarchingCubesPrimitive I modified it to accept an object of type IDrawable, containing lists for the various collections (vertices, normals, UVs, indices), the logic was otherwise untouched. My understanding is that given a very low isovalue the accuracy level of the surface being rendered should increase, so in short "less 45 degree slows more rolling hills" type mesh output. However this isn't what I'm seeing. Have I missed something or is the implementation flawed and need to be fixed? EDIT: A little more detail on what I am seeing when I "marching cube" the data. Ok so firstly, ignore the fact that the meshes created by the chunks don't "connect" (i'll probably raise another question about this later). Then look at the shaping of the island, it's too ... square, from the voxels rendered as boxes you get the impression there's a clean soft gradual hill and yet from the image there are sharp falling edges even in the most central areas where the gradient in the first image looks the most smooth. The data is "regenerated" each time I run this so no 2 islands come out the same, and it's purely random so not based on noise, but still, how can it look so smooth in 1 image and so not smooth in the other?

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• ArchBeat Link-o-Rama for November 8, 2012

  - by Bob Rhubart

  Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• IRM and Consumerization

  - by martin.abrahams

  As the season of rampant consumerism draws to its official close on 12th Night, it seems a fitting time to discuss consumerization - whereby technologies from the consumer market, such as the Android and iPad, are adopted by business organizations. I expect many of you will have received a shiny new mobile gadget for Christmas - and will be expecting to use it for work as well as leisure in 2011. In my case, I'm just getting to grips with my first Android phone. This trend developed so much during 2010 that a number of my customers have officially changed their stance on consumer devices - accepting consumerization as something to embrace rather than resist. Clearly, consumerization has significant implications for information control, as corporate data is distributed to consumer devices whether the organization is aware of it or not. I daresay that some DLP solutions can limit distribution to some extent, but this creates a conflict between accepting consumerization and frustrating it. So what does Oracle IRM have to offer the consumerized enterprise? First and foremost, consumerization does not automatically represent great additional risk - if an enterprise seals its sensitive information. Sealed files are encrypted, and that fundamental protection is not affected by copying files to consumer devices. A device might be lost or stolen, and the user might not think to report the loss of a personally owned device, but the data and the enterprise that owns it are protected. Indeed, the consumerization trend is another strong reason for enterprises to deploy IRM - to protect against this expansion of channels by which data might be accidentally exposed. It also enables encryption requirements to be met even though the enterprise does not own the device and cannot enforce device encryption. Moving on to the usage of sealed content on such devices, some of our customers are using virtual desktop solutions such that, in truth, the sealed content is being opened and used on a PC in the normal way, and the user is simply using their device for display purposes. This has several advantages: The sensitive documents are not actually on the devices, so device loss and theft are even less of a worry The enterprise has another layer of control over how and where content is used, as access to the virtual solution involves another layer of authentication and authorization - defence in depth It is a generic solution that means the enterprise does not need to actively support the ever expanding variety of consumer devices - the enterprise just manages some virtual access to traditional systems using something like Citrix or Remote Desktop services. It is a tried and tested way of accessing sealed documents. People have being using Oracle IRM in conjunction with Citrix and Remote Desktop for several years. For some scenarios, we also have the "IRM wrapper" option that provides a simple app for sealing and unsealing content on a range of operating systems. We are busy working on other ways to support the explosion of consumer devices, but this blog is not a proper forum for talking about them at this time. If you are an Oracle IRM customer, we will be pleased to discuss our plans and your requirements with you directly on request. You can be sure that the blog will cover the new capabilities as soon as possible.

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• add collision detection to sprite?

  - by xBroak

  bassically im trying to add collision detection to the sprite below, using the following: self.rect = bounds_rect collide = pygame.sprite.spritecollide(self, wall_list, False) if collide: # yes print("collide") However it seems that when the collide is triggered it continuously prints 'collide' over and over when instead i want them to simply not be able to walk through the object, any help? def update(self, time_passed): """ Update the creep. time_passed: The time passed (in ms) since the previous update. """ if self.state == Creep.ALIVE: # Maybe it's time to change the direction ? # self._change_direction(time_passed) # Make the creep point in the correct direction. # Since our direction vector is in screen coordinates # (i.e. right bottom is 1, 1), and rotate() rotates # counter-clockwise, the angle must be inverted to # work correctly. # self.image = pygame.transform.rotate( self.base_image, -self.direction.angle) # Compute and apply the displacement to the position # vector. The displacement is a vector, having the angle # of self.direction (which is normalized to not affect # the magnitude of the displacement) # displacement = vec2d( self.direction.x * self.speed * time_passed, self.direction.y * self.speed * time_passed) self.pos += displacement # When the image is rotated, its size is changed. # We must take the size into account for detecting # collisions with the walls. # self.image_w, self.image_h = self.image.get_size() global bounds_rect bounds_rect = self.field.inflate( -self.image_w, -self.image_h) if self.pos.x < bounds_rect.left: self.pos.x = bounds_rect.left self.direction.x *= -1 elif self.pos.x > bounds_rect.right: self.pos.x = bounds_rect.right self.direction.x *= -1 elif self.pos.y < bounds_rect.top: self.pos.y = bounds_rect.top self.direction.y *= -1 elif self.pos.y > bounds_rect.bottom: self.pos.y = bounds_rect.bottom self.direction.y *= -1 self.rect = bounds_rect collide = pygame.sprite.spritecollide(self, wall_list, False) if collide: # yes print("collide") elif self.state == Creep.EXPLODING: if self.explode_animation.active: self.explode_animation.update(time_passed) else: self.state = Creep.DEAD self.kill() elif self.state == Creep.DEAD: pass #------------------ PRIVATE PARTS ------------------# # States the creep can be in. # # ALIVE: The creep is roaming around the screen # EXPLODING: # The creep is now exploding, just a moment before dying. # DEAD: The creep is dead and inactive # (ALIVE, EXPLODING, DEAD) = range(3) _counter = 0 def _change_direction(self, time_passed): """ Turn by 45 degrees in a random direction once per 0.4 to 0.5 seconds. """ self._counter += time_passed if self._counter > randint(400, 500): self.direction.rotate(45 * randint(-1, 1)) self._counter = 0 def _point_is_inside(self, point): """ Is the point (given as a vec2d) inside our creep's body? """ img_point = point - vec2d( int(self.pos.x - self.image_w / 2), int(self.pos.y - self.image_h / 2)) try: pix = self.image.get_at(img_point) return pix[3] > 0 except IndexError: return False def _decrease_health(self, n): """ Decrease my health by n (or to 0, if it's currently less than n) """ self.health = max(0, self.health - n) if self.health == 0: self._explode() def _explode(self): """ Starts the explosion animation that ends the Creep's life. """ self.state = Creep.EXPLODING pos = ( self.pos.x - self.explosion_images[0].get_width() / 2, self.pos.y - self.explosion_images[0].get_height() / 2) self.explode_animation = SimpleAnimation( self.screen, pos, self.explosion_images, 100, 300) global remainingCreeps remainingCreeps-=1 if remainingCreeps == 0: print("all dead")

  Read the article

• Forms&Reports upgrade characterset issues

  - by Lukasz Romaszewski

  Hello,This quick post is based on my findings during recent IMC workshops, especially those related to upgrading the Forms 6i/9i/10g applications to Forms 11g platform. The upgrade process itself is pretty straightforward and it basically requires recompiling your Forms application with a latest version of frmcmp tool. For some cases though, especially when you migrate from Forms 6i which is a client-server architecture to a 3-tier web solution (Forms 11g), you need to rewrite some parts of your code to make it run on new platform. The things you need to change range from reimplementing (using webutil library) typical client-site functionality like local IO operation, access to WinAPI, invoking DLLs etc. to changing deprecated or obsolete APIs like RUN_PRODUCT to RUN_REPORT_OBJECT. To automate those changes Oracle provides complete Java API  which allows you to manipulate the code and structure of you modules (JDAPI). To make it even easier we can use Forms Migration Assistant tool (written in Java using JDAPI) which is able to replace all occurrences of old API entries with their 11g equivalents or warn you when the replacement is not possible. You can also add your own replacement definitions in the search_replace.properties file. But you need to be aware of some issues that can be encountered using this tool. First of all if you are using some hard-coded text inside your triggers you may notice that after processing them by the Migration Assistant tool the national characters may be lost. This is due to the fact that you need to explicitly tell Java application (which MA really is) what kind of characterset it should use to read those text properly. In order to do that just add to a script calling MA the following line:  export JAVA_TOOL_OPTIONS=-Dfile.encoding=<JAVA_ISO_ENCODING>  when the particular encoding must match the NLS_LANG in your Forms Builder environment (for example for Polish characterset you need to use ISO-8859-2).Second issue you can encounter related to national charactersets is lack of national symbols in you reports after migration. This can be solved by adding appropriate NLS_LANG entry in your reports environment. Sometimes instead of particular characterset you see "Greek characters" in your reports. This is just default font used by reports engine instead of the one defined in your report. To solve it you must copy fonts definitions from your old environment (e.g. Forms 10g installation) to appropriate directory in new installation (usually AFM folder). For more information about this and other issues please refer to https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=1297012.1at My Oracle Support site. That's all for today, stay tuned for more posts on this topic! Lukasz

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Card deck and sparse matrix interview questions

  - by MrDatabase

  I just had a technical phone screen w/ a start-up. Here's the technical questions I was asked ... and my answers. What do think of these answers? Feel free to post better answers :-) Question 1: how would you represent a standard 52 card deck in (basically any language)? How would you shuffle the deck? Answer: use an array containing a "Card" struct or class. Each instance of card has some unique identifier... either it's position in the array or a unique integer member variable in the range [0, 51]. Shuffle the cards by traversing the array once from index zero to index 51. Randomly swap ith card with "another card" (I didn't remember how this shuffle algorithm works exactly). Watch out for using the same probability for each card... that's a gotcha in this algorithm. I mentioned the algorithm is from Programming Pearls. Question 2: how to represent a large sparse matrix? the matrix can be very large... like 1000x1000... but only a relatively small number (~20) of the entries are non-zero. Answer: condense the array into a list of the non-zero entries. for a given entry (i,j) in the array... "map" (i,j) to a single integer k... then use k as a key into a dictionary or hashtable. For the 1000x1000 sparse array map (i,j) to k using something like f(i, j) = i + j * 1001. 1001 is just one plus the maximum of all i and j. I didn't recall exactly how this mapping worked... but the interviewer got the idea (I think). Are these good answers? I'm wondering because after I finished the second question the interviewer said the dreaded "well that's all the questions I have for now." Cheers!

  Read the article

• One Week To Go: OTN Architect Day: Cloud Computing

  - by Bob Rhubart

  One week remains until OTN Architect Day: Cloud Computing kicks of at the spectacular Oracle HQ campus in Redwood Shores, CA. The event is free, and there is still time to register. When: Tuesday July 9, 2013 8:30am - 12:30pm Where: Oracle Conference Center350 Oracle Pkwy Redwood City, CA 94065 Register now. It's free! Here's the latest update to the event agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Markus Michalewicz Senior Principal Product Manager Oracle Real Application Clusters (RAC) New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Markus Michalewicz respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• One Week To Go: OTN Architect Day: Cloud Computing

  - by Bob Rhubart

  One week remains until OTN Architect Day: Cloud Computing kicks of at the spectacular Oracle HQ campus in Redwood Shores, CA. The event is free, and there is still time to register. When: Tuesday July 9, 2013 8:30am - 12:30pm Where: Oracle Conference Center350 Oracle Pkwy Redwood City, CA 94065 Register now. It's free! Here's the latest update to the event agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Markus Michalewicz Senior Principal Product Manager Oracle Real Application Clusters (RAC) New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Markus Michalewicz respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• How do I stop icons appearing on the desktop in a particular area?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} Conky solutions have been offered, but perhaps these aren't the best way of approaching it. What I really want is to stop icons even appearing in that part of the desktop window: that is, I want to make part of the desktop real estate "off-limits" to new icons appearing on the desktop.

  Read the article

• Fan not detected by lm-sensors

  - by OrangeTux

  My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

  Read the article

• Database Security: The First Step in Pre-Emptive Data Leak Prevention

  - by roxana.bradescu

  With WikiLeaks raising awareness around information leaks and the harm they can cause, many organization are taking stock of their own information leak protection (ILP) strategies in 2011. A report by IDC on data leak prevention stated: Increasing database security is one of the most efficient and cost-effective measures an organization can take to prevent data leaks. By utilizing the data protection, access control, account management, encryption, log management, and other security controls inherent in the database management system, entities can institute first-level control over the widest range of protected information. As a central repository for unstructured data, which is growing at leaps and bounds, the database should be the first layer providing information leakage protection. Unfortunately, most organizations are not taking sufficient steps to protect their databases according to a survey of the Independent Oracle User Group. For example, any operating system administrator or database administrator can access the all the data stored in the database in most organizations. Without any kind of auditing or monitoring. And it's not just administrators, database users can typically access the database with ad-hoc query tools from their desktop and by-pass any application level controls. Despite numerous regulations calling for controls to limit the powers of insiders, most organizations still put too many privileges in the hands of their employees. Time and time again these excess privileges have backfired. Internal agents were implicated in almost half of data breaches according to the Verizon Data Breach Investigations Report and the rate is rising. Hackers also took advantage of these excess privileges very successfully using stolen credentials and SQL injection attacks. But back to the insiders. Who are these insiders and why do they do it? In 2002, the U.S. Secret Service (USSS) behavioral psychologists and CERT information security experts formed the Insider Threat Study team to examine insider threat cases that occurred in US critical infrastructure sectors, and examined them from both a technical and a behavioral perspective. A series of fascinating reports has been published as a result of this work. You can learn more by watching the ISSA Insider Threat Web Conference. So as your organization starts to look at data leak prevention over the coming year, start off by protecting your data at the source - your databases. IDC went on to say: Any enterprise looking to improve its competitiveness, regulatory compliance, and overall data security should consider Oracle's offerings, not only because of their database management capabilities but also because they provide tools that are the first layer of information leak prevention. Learn more about Oracle Database Security solutions and get the whitepapers, demos, tutorials, and more that you need to protect data privacy from internal and external threats.

  Read the article

• Power Your Cloud with Oracle Fusion Middleware

  - by user753488

  Introducing the biggest and most strategic event for Fusion Middleware this year: Power your Cloud with Oracle Fusion Middleware. Running in over 50 cities across the globe, this event is aimed at Architects, IT Managers, and technical leaders like you who are using Fusion Middleware or trying to learn more about middleware in the context of Cloud computing. Join us for a special kickoff on Wednesday, June 29th in Chicago for the first event in North America. This event features an exclusive keynote from Rick Schultz, VP of Technology Product Marketing. Cloud is certainly all the rage. But what can we make of it? According to Alex Andrianopoulos, Vice President Product Marketing for Fusion Middleware states, “Not since Java was unveiled have we seen something so transformative hit the industry. The promised benefits of Cloud are many, significant, and deliver value to both IT organizations as well as the Line of Business. The benefits range from lower data center costs, to significantly reduced environmental impact, to the ability to capture more of the opportunities that market present through increased agility in resource deployment and dramatically reduced time to market.” With an ROI so promising, why isn’t everyone on Cloud already? It’s a question a lot of IT managers are struggling with. While the promised benefits of Cloud computing can be immense, achieving them requires much more than the adoption of a new architecture, or the virtualization of servers, or the outsourcing of some or all of the IT resources. These may be useful steps towards moving to a Cloud computing blueprint, but on their own do not deliver Cloud computing and its associated benefits to the enterprise. This is exactly what we’ll be addressing in the event series, ways you can leverage Complete, Open and Integrated capabilities of Oracle Fusion Middleware today to get one step closer to Cloud. Whether you’re: Leveraging Exalogic Elastic Cloud to consolidate your applications Improving agility with Oracle SOA to generate a foundation for shared data services Securing and managing your Cloud using Oracle Identity Management and Oracle Enterprise Manager Migrating from mainframe to Cloud using Oracle Tuxedo, Coherence and GoldenGate Building applications in the Cloud swiftly and easier with Oracle’s WebCenter Suite Join us for the first of its kind event in Chicago this week by registering now, or find an event near you. Learn more about Oracle Fusion Middleware and Cloud computing today on the Oracle.com website by going to http://www.Oracle.com/goto/Middleware4Cloud

  Read the article

• How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

  - by VedVals

  My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

  Read the article

• Do I need to create my own or use a commercial server for the features and matchmaking options I want my game to support?

  - by baptzmoffire

  So I'm developing an indie turn-based game for iOS and, in coding up a Game Center matchmaking class, I'm starting to question whether Game Center is even the best choice for what I want this game to do. I need to figure out whether I need to create my own server, invest in a preexisting client or server service, or if I even need to use a server at all. If I do need to use a ready-made service other than Game Center, which server would accomodate my game's needs best? I have limited resources and funds. Here is the list of features I want my game to support, ideally: Turn-based gameplay (a la "with Friends" and "with Buddies" games) Smart matchmaking (matching users up with other players of comparable skill/achievements) Random matchmaking Facebook matchmaking Specific username matchmaking Contact list matchmaking A way to select what "type" of match you want to challenge an opponent to. (In random, smart, and Facebook matchmaking, there will be different "wagers" the player can make. [e.g. "I wanna play a random opponent for 1000 points. Now, I wanna play my Facebook buddy for 1,000,000 points."] There will be a predetermined range of amounts you can play for. It won't be customizable.) Buddies list capability (Game-buddies, as opposed to contacts and Facebook) A higher concurrent game cap than Game Center offers (which I still can't really find a straight answer on) Scalability (it should support 2 or 20,000,000 players) Objective-C compatibility Flexibility (for all the stuff I haven't thought of yet) Am I dreaming, here? Is there even a service that can handle all of these features? Do I need to invest months in learning a networking language to build my own? If so, how much would I need to spend on hardware? I've been looking around all morning and, so far, the only seemingly viable option is SmartFox. Under "Everything and the kitchen sink" section here, it says they support "virtual world with Zones, Rooms and RoomGroups, create complex game challenges, send invitations, manage buddy lists, create custom permission profiles, oversee the security aspects and tons more." http://www.smartfoxserver.com/overview/platform Is there an option that Im just overlooking? Thanks for any help anyone can provide. Sorry for the long poast. One last question: Does anyone know which server Dice with Buddies uses? I was experimenting with how many concurrent games I could get going and my ADHD kicked in at about 80 games. 80 concurrent games would be great for my game, but again, I need the other features I mentioned too. Thanks again.

  Read the article

• NVIDIA 550M Drivers

  - by DOOM

  First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

  Read the article

• Sometimes keyboard & touchpad work... sometimes not

  - by Voyagerfan5761

  When I first ran Ubuntu from CD on this Dell Inspiron 2650, it worked for about ten to fifteen minutes, then it hung (I was probably trying to do too much at once from a Live CD). The next time, my mouse and keyboard didn't work. I rebooted three times and finally got them working. I then installed Ubuntu alongside Windows XP. After installing, selecting the OS in GRUB worked, but my touchpad and keyboard were again not working. I rebooted, and they worked. (I fortunately had a USB mouse with which to reboot.) Booting Ubuntu and then rebooting to enable my keyboard and touchpad has become a routine ever since. Often several reboots are required; at one point I had to reboot over a dozen times in a row before getting a session where everything worked properly. (My installation has been in place for about three days a week now.) I've looked around for a device manager equivalent to no avail. Sometimes the hardware is properly detected, and sometimes it's not. Once or twice I've had the keyboard detected properly but the touchpad not. Plugging in my wireless card also sometimes requires a plug, unplug, and plug again to get it working. So is there some solution? I'm without an Internet connection at home, and this "laptop" is really a wall wart on my desk, so suggestions for packages may take a while to test. Xorg logs I captured two three four sample Xorg logs: one from a startup where the devices worked; one from when they didn't; one from a session where Ubuntu thought my touchpad was a normal mouse; and one from a session where my keyboard worked but the touchpad didn't. See this gist. Updated 2010-12-15 01:50 UTC with Xorg.0.log.keyboardonly file illustrating the case where the keyboard worked but not the touchpad. Updated 2011-01-11 04:10 UTC with Xorg.0.log.touchpadregmouse to illustrate a case where the touchpad was detected as a regular mouse (no "Touchpad" tab in mouse prefs).

  Read the article

• Five Fake Sounds Engineered to Make Your Feel Better [Science]

  - by Jason Fitzpatrick

  As objects in our environment (like cars, ATMs, and phones) have grown lighter and quieter scientists have been carefully engineering their sounds so that they continue to sound like we expect them to. Read on to see how. At the design blog Humans Invent they share five interesting ways that the world around us is being engineered so it sounds the way we expect it to. They start with the example of the car door. Years ago cars were almost entirely steel, the doors were weighty, and when you slammed them it sounded like one big hunk of steel locking into another big hunk of steel (which, in fact, it was). Newer cars are lighter but people still crave that substantial clunk. Humans Invent highlights the effect of consumer desire: A car door is essentially a hollow shell with parts placed inside it. Without careful design the door frame amplifies the rattling of mechanisms inside. Car companies know that if buyers don’t get a satisfying thud when they close the door, it dents their confidence in the entire vehicle. To produce the ideal clunk, car doors are designed to minimise the amount of high frequencies produced (we associate them with fragility and weakness) and emphasise low, bass-heavy frequencies that suggest solidity. The effect is achieved in a range of different ways – car companies have piled up hundreds of patents on the subject – but usually involves some form of dampener fitted in the door cavity. Locking mechanisms are also tailored to produce the right sort of click and the way seals make contact is precisely controlled. On average it takes 1.8 seconds to close a car door but in that time you’re witnessing a strange kind of symphony composed by engineers and designers whose goal is to reassure you that its rock solid. They mention lock mechanisms, something you may never have thought about. A friend of mine had a Ford Focus some years ago and that particular model had electric locks that, instead of giving a satisfying thunk or solid click, made this horrible gates-of-the-prison-buzzing sound that was completely unnerving. Hit up the link below to see how sounds are engineered for car doors, electric motors, ATM machines, and more. 5 Fake Sounds Designed to Help Humans [Humans Invent via Boing Boing] How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >