Search Results

Search found 8165 results on 327 pages for '3d graphics'.

Page 294/327 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• EXC_BAD_ACCESS and KERN_INVALID_ADDRESS after intiating a print sequence.

  - by Edward M. Bergmann

  MAC G4/1.5GHz/2GB/1TB+ OS10.4.11 Start up Volume has been erased/complete reinstall with updated software. Current problem only occurs when printing to an Epson Artisan 800 [USB as well as Ethernet connected] when using Macromedia FreeHand 10.0.1.67. All other apps/printers work fine. Memory has been removed/swapped/reinstalled several times, CPU was changed from 1.5GB to 1.3GB. Page(s) will print, but application quits within a second or two after selecting "print." Apple has never replied, Epson hasn't a clue, and I am befuddled!! Perhaps there is GURU out their who and see a bigger-better picture and understands how to interpret all of this stuff. If so, it would be a terrific pleasure to get a handle on how to cure this problem or get some A M M U N I T I O N to fire in the right direction. I thank you in advance. FreeHand 10 MAC OS10.4.11 unexpectedly quits after invoking a print command, the result: Date/Time: 2010-04-20 14:23:18.371 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: FreeHand 10 Path: /Applications/Macromedia FreeHand 10.0.1.67/FreeHand 10 Parent: WindowServer [1060] Version: 10.0.1.67 (10.0.1.67, Copyright © 1988-2002 Macromedia Inc. and its licensors. All rights reserved.) PID: 1217 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x07d7e000 Thread 0 Crashed: 0 <<00000000>> 0xffff8a60 __memcpy + 704 (cpu_capabilities.h:189) 1 FreeHand X 0x011d2994 0x1008000 + 1878420 2 FreeHand X 0x01081da4 0x1008000 + 499108 3 FreeHand X 0x010f5474 0x1008000 + 971892 4 FreeHand X 0x010d0278 0x1008000 + 819832 5 FreeHand X 0x010fa808 0x1008000 + 993288 6 FreeHand X 0x01113608 0x1008000 + 1095176 7 FreeHand X 0x01113748 0x1008000 + 1095496 8 FreeHand X 0x01099ebc 0x1008000 + 597692 9 FreeHand X 0x010fa358 0x1008000 + 992088 10 FreeHand X 0x010fa170 0x1008000 + 991600 11 FreeHand X 0x010f9830 0x1008000 + 989232 12 FreeHand X 0x01098678 0x1008000 + 591480 13 FreeHand X 0x010f7a5c 0x1008000 + 981596 Thread 1: 0 libSystem.B.dylib 0x90005dec syscall + 12 1 com.apple.OpenTransport 0x9ad015a0 BSD_waitevent + 44 2 com.apple.OpenTransport 0x9ad06360 CarbonSelectThreadFunc + 176 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 2: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad01e94 CarbonOperationThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 3: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad11df0 CarbonInetOperThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 4: 0 libSystem.B.dylib 0x90053f88 semaphore_timedwait_signal_trap + 8 1 libSystem.B.dylib 0x900707e8 pthread_cond_timedwait_relative_np + 556 2 ...ple.CoreServices.CarbonCore 0x90bf9330 TSWaitOnSemaphoreCommon + 176 3 ...ple.CoreServices.CarbonCore 0x90c012d0 TimerThread + 60 4 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 5: 0 libSystem.B.dylib 0x9001f48c select + 12 1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472 2 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 6: 0 libSystem.B.dylib 0x9002188c access + 12 1 ...e.print.framework.PrintCore 0x9169a620 CreateProxyURL(__CFURL const*) + 192 2 ...e.print.framework.PrintCore 0x9169a4f8 CreateOriginalPrinterProxyURL() + 80 3 ...e.print.framework.PrintCore 0x9169a034 CheckPrinterProxyVersion(OpaquePMPrinter*, __CFURL const*) + 192 4 ...e.print.framework.PrintCore 0x91699d94 PJCPrinterProxyCreateURL + 932 5 ...e.print.framework.PrintCore 0x916997bc PJCLaunchPrinterProxy(OpaquePMPrinter*, PMLaunchPCReason) + 32 6 ...e.print.framework.PrintCore 0x91699730 PJCLaunchPrinterProxyThread(void*) + 136 7 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 0 crashed with PPC Thread State 64: srr0: 0x00000000ffff8a60 srr1: 0x000000000200f030 vrsave: 0x00000000ff000000 cr: 0x24002244 xer: 0x0000000020000002 lr: 0x00000000011d2994 ctr: 0x00000000000003f6 r0: 0x0000000000000000 r1: 0x00000000bfffea60 r2: 0x0000000000000000 r3: 0x00000000083bb000 r4: 0x00000000083c0040 r5: 0x0000000000014d84 r6: 0x0000000000000010 r7: 0x0000000000000020 r8: 0x0000000000000030 r9: 0x0000000000000000 r10: 0x0000000000000060 r11: 0x0000000000000080 r12: 0x0000000007d7e000 r13: 0x0000000000000000 r14: 0x00000000005cbd26 r15: 0x0000000000000001 r16: 0x00000000017b03a0 r17: 0x0000000000000000 r18: 0x000000000068fa80 r19: 0x0000000000000001 r20: 0x0000000006c639c4 r21: 0x00000000006900f8 r22: 0x0000000006e09480 r23: 0x0000000006e0a250 r24: 0x0000000000000002 r25: 0x0000000000000000 r26: 0x00000000bfffed2c r27: 0x0000000006e05ce0 r28: 0x0000000000014d84 r29: 0x0000000000000000 r30: 0x0000000000014d84 r31: 0x00000000083bb000 Binary Images Description: 0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp 0x27f000 - 0x2ce3c7 CarbonLibpwpc PEF binary: CarbonLibpwpc 0x2ce3d0 - 0x2e66bd Apple;Carbon;Multimedia PEF binary: Apple;Carbon;Multimedia 0x2e7c00 - 0x2e998b Apple;Carbon;Networking PEF binary: Apple;Carbon;Networking 0x31ab10 - 0x31abb3 CFMPriv_QuickTime PEF binary: CFMPriv_QuickTime 0x31ac20 - 0x31ac97 CFMPriv_System PEF binary: CFMPriv_System 0x31af30 - 0x31b000 CFMPriv_CarbonSound PEF binary: CFMPriv_CarbonSound 0x31b080 - 0x31b153 CFMPriv_CommonPanels PEF binary: CFMPriv_CommonPanels 0x31b230 - 0x31b2eb CFMPriv_Help PEF binary: CFMPriv_Help 0x31b2f0 - 0x31b3ba CFMPriv_HIToolbox PEF binary: CFMPriv_HIToolbox 0x31b440 - 0x31b516 CFMPriv_HTMLRendering PEF binary: CFMPriv_HTMLRendering 0x31b550 - 0x31b602 CFMPriv_CoreFoundation PEF binary: CFMPriv_CoreFoundation 0x31b7f0 - 0x31b8a5 CFMPriv_DVComponentGlue PEF binary: CFMPriv_DVComponentGlue 0x31f760 - 0x31f833 CFMPriv_ImageCapture PEF binary: CFMPriv_ImageCapture 0x31f8c0 - 0x31f9a5 CFMPriv_NavigationServices PEF binary: CFMPriv_NavigationServices 0x31fa20 - 0x31faf6 CFMPriv_OpenScripting?MacBLib PEF binary: CFMPriv_OpenScripting?MacBLib 0x31fbd0 - 0x31fc8e CFMPriv_Print PEF binary: CFMPriv_Print 0x31fcb0 - 0x31fd7d CFMPriv_SecurityHI PEF binary: CFMPriv_SecurityHI 0x31fe00 - 0x31fee2 CFMPriv_SpeechRecognition PEF binary: CFMPriv_SpeechRecognition 0x31ff60 - 0x320033 CFMPriv_CarbonCore PEF binary: CFMPriv_CarbonCore 0x3200b0 - 0x320183 CFMPriv_OSServices PEF binary: CFMPriv_OSServices 0x320260 - 0x320322 CFMPriv_AE PEF binary: CFMPriv_AE 0x320330 - 0x3203f5 CFMPriv_ATS PEF binary: CFMPriv_ATS 0x320470 - 0x320547 CFMPriv_ColorSync PEF binary: CFMPriv_ColorSync 0x3205d0 - 0x3206b3 CFMPriv_FindByContent PEF binary: CFMPriv_FindByContent 0x320730 - 0x32080a CFMPriv_HIServices PEF binary: CFMPriv_HIServices 0x320880 - 0x320960 CFMPriv_LangAnalysis PEF binary: CFMPriv_LangAnalysis 0x3209f0 - 0x320ad6 CFMPriv_LaunchServices PEF binary: CFMPriv_LaunchServices 0x320bb0 - 0x320c87 CFMPriv_PrintCore PEF binary: CFMPriv_PrintCore 0x320c90 - 0x320d52 CFMPriv_QD PEF binary: CFMPriv_QD 0x320e50 - 0x320f39 CFMPriv_SpeechSynthesis PEF binary: CFMPriv_SpeechSynthesis 0x405000 - 0x497f7a PowerPlant Shared Library PEF binary: PowerPlant Shared Library 0x498000 - 0x4f0012 Player PEF binary: Player 0x4f1000 - 0x54a4c0 KodakCMSC PEF binary: KodakCMSC 0x6bd000 - 0x6eca10 <Unknown disk fragment> PEF binary: <Unknown disk fragment> 0x7fc000 - 0x7fdb8b xRes Palette Importc PEF binary: xRes Palette Importc 0x1008000 - 0x17770a5 FreeHand X PEF binary: FreeHand X 0x17770b0 - 0x17a6fe7 MW_MSL.Carbon.Shlb PEF binary: MW_MSL.Carbon.Shlb 0x17fb000 - 0x17fff03 Smudge PEF binary: Smudge 0x5ce6000 - 0x5cecebe PICT Import Export68 PEF binary: PICT Import Export68 0x5ced000 - 0x5d24267 PNG Import Exportr68 PEF binary: PNG Import Exportr68 0x5d25000 - 0x5d30dde Release To Layerswpc PEF binary: Release To Layerswpc 0x5d31000 - 0x5d37fd2 Roughen PEF binary: Roughen 0x5d38000 - 0x5d459ae Shadow PEF binary: Shadow 0x5d46000 - 0x5d4b0de Spiral PEF binary: Spiral 0x5d4c000 - 0x5d57f07 Targa Import Export8 PEF binary: Targa Import Export8 0x5d58000 - 0x5d8d959 TIFF Import Export68 PEF binary: TIFF Import Export68 0x5d93000 - 0x5da0f65 Color Utilities PEF binary: Color Utilities 0x5f62000 - 0x5f6e795 Mirror PEF binary: Mirror 0x5f6f000 - 0x5fbd656 HTML Export PEF binary: HTML Export 0x5fc8000 - 0x5fd442f Graphic Hose PEF binary: Graphic Hose 0x5fd5000 - 0x5fe4b5a BMP Import Exportr68 PEF binary: BMP Import Exportr68 0x5fe5000 - 0x60342d6 PDF Export PEF binary: PDF Export 0x6041000 - 0x6042f44 Fractalizej@ PEF binary: Fractalizej@ 0x6043000 - 0x6075214 Chart Tool™ PEF binary: Chart Tool™ 0x6076000 - 0x607d46d Bend PEF binary: Bend 0x607e000 - 0x60cda7b PDF Import PEF binary: PDF Import 0x60dc000 - 0x60e38f2 Photoshop ImportChartCursor PEF binary: Photoshop ImportChartCursor 0x60e4000 - 0x60eb9b1 3D Rotationp PEF binary: 3D Rotationp 0x60ec000 - 0x611b458 JPEG Import ExportANEL PEF binary: JPEG Import ExportANEL 0x611c000 - 0x613d89f GIF Import Export PEF binary: GIF Import Export 0x613e000 - 0x616d7f7 Flash Export PEF binary: Flash Export 0x616e000 - 0x6175d75 Fisheye Lens PEF binary: Fisheye Lens 0x6176000 - 0x6182343 IPTC File Info PEF binary: IPTC File Info 0x6184000 - 0x6193790 PEF binary: 0x6194000 - 0x61965e5 Photoshop Palette Import PEF binary: Photoshop Palette Import 0x6197000 - 0x619c5a4 Add PointsZ PEF binary: Add PointsZ 0x619d000 - 0x61ad92b Emboss PEF binary: Emboss 0x61ae000 - 0x61be6e1 AppleScript™ Xtrawpc PEF binary: AppleScript™ Xtrawpc 0x61bf000 - 0x61d16de Navigation PEF binary: Navigation 0x61d2000 - 0x61ff94e CorelDRAW 7-8 Import PEF binary: CorelDRAW 7-8 Import 0x620a000 - 0x620d7f1 Trap PEF binary: Trap 0x620e000 - 0x62149d4 Import RGB Color Table PEF binary: Import RGB Color Table 0x6215000 - 0x6217dfe Arc PEF binary: Arc 0x6218000 - 0x62211e3 Delete Empty Text Blocks PEF binary: Delete Empty Text Blocks 0x6222000 - 0x624c8da MIX Services PEF binary: MIX Services 0x7d0b000 - 0x7d37fff com.apple.print.framework.Print.Private 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI 0x7dbf000 - 0x7ddffff com.apple.print.PrintingCocoaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Plugins/PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs 0x7f05000 - 0x7f39fff com.epson.ijprinter.pde.PrintSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/PrintSetting.plugin/Contents/MacOS/PrintSetting 0x7f49000 - 0x8044fff com.epson.ijprinter.IJPFoundation 6.54 /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPFoundation.framework/Versions/A/IJPFoundation 0x809a000 - 0x80cdfff com.epson.ijprinter.pde.ColorManagement.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ColorManagement.plugin/Contents/MacOS/ColorManagement 0x80dd000 - 0x8110fff com.epson.ijprinter.pde.ExpandMargin.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExpandMargin.plugin/Contents/MacOS/ExpandMargin 0x8120000 - 0x8153fff com.epson.ijprinter.pde.ExtensionSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExtensionSetting.plugin/Contents/MacOS/ExtensionSetting 0x8163000 - 0x8196fff com.epson.ijprinter.pde.DoubleSidePrint.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/DoubleSidePrint.plugin/Contents/MacOS/DoubleSidePrint 0x81a6000 - 0x81bffff com.apple.print.PrintingTiogaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Frameworks/Print.framework/Versions/A/Plugins/PrintingTiogaPDEs.bundle/Contents/MacOS/PrintingTiogaPDEs 0x838f000 - 0x8397fff com.apple.print.converter.plugin 4.5 (163.8) /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter 0x78e00000 - 0x78e07fff libLW8Utils.dylib /System/Library/Printers/Libraries/libLW8Utils.dylib 0x79200000 - 0x7923ffff libLW8Converter.dylib /System/Library/Printers/Libraries/libLW8Converter.dylib 0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld 0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib 0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib 0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib 0x90aea000 - 0x90b5cfff IOKit /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib 0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90f92000 - 0x90fd4fff com.apple.CFNetwork 129.24 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore 0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib 0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security 0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib 0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib 0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent 0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib 0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib 0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib 0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x91d0c000 - 0x91deafff libxml2.2.dylib /usr/lib/libxml2.2.dylib 0x91e0a000 - 0x91e48fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91e4f000 - 0x91e4ffff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x91e51000 - 0x91f36fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x91f3e000 - 0x91f5dfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x91fc9000 - 0x92037fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92042000 - 0x920d7fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x920f1000 - 0x92679fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x926ac000 - 0x929d7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x92a07000 - 0x92af5fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x92af8000 - 0x92b80fff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x92bc1000 - 0x92df4fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x93714000 - 0x93734fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib 0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9477d000 - 0x9478cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib 0x94794000 - 0x947a1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib 0x947a7000 - 0x947c6fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib 0x947e7000 - 0x94800fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib 0x94807000 - 0x94b3afff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x94c22000 - 0x94c93fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib 0x94e09000 - 0x94f39fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook 0x94fcc000 - 0x94fdbfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers 0x94fe3000 - 0x95010fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x95017000 - 0x95027fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib 0x9502b000 - 0x9505afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib 0x9506a000 - 0x95087fff libresolv.9.dylib /usr/lib/libresolv.9.dylib 0x9acff000 - 0x9ad1dfff com.apple.OpenTransport 2.0 /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport 0x9ad98000 - 0x9ad99fff com.apple.iokit.dvcomponentglue 1.7.9 /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue 0x9b1db000 - 0x9b1f2fff libCFilter.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCFilter.A.dylib 0x9c69b000 - 0x9c6bdfff libmx.A.dylib /usr/lib/libmx.A.dylib 0xeab00000 - 0xeab25fff libConverter.dylib /System/Library/Printers/Libraries/libConverter.dylib Model: PowerMac3,1, BootROM 4.2.8f1, 1 processors, PowerPC G4 (3.3), 1.3 GHz, 2 GB Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333 Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333 Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333 Memory Module: DIMM3/J24, 512 MB, SDRAM, PC133-333 Modem: Spring, UCJ, V.90, 3.0F, APPLE VERSION 0001, 4/7/1999 Network Service: Built-in Ethernet, Ethernet, en0 PCI Card: SeriTek/1V2E2 v.5.1.3,11/22/05, 23:47:18, ata, SLOT-B PCI Card: pci-bridge, pci, SLOT-C PCI Card: firewire, ieee1394, 2x8 PCI Card: usb, usb, 2x9 PCI Card: usb, usb, 2x9 PCI Card: pcie55,2928, 2x9 PCI Card: ATTO,ExpressPCIPro, scsi, SLOT-D Parallel ATA Device: MATSHITADVD-ROM SR-8585 Parallel ATA Device: IOMEGA ZIP 100 ATAPI USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMic USB audio system, Griffin Technology, Inc, Up to 12 Mb/sec, 500 mA USB Device: USB Storage Device, Generic, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 MFP, EPSON, Up to 12 Mb/sec, 500 mA USB Device: DYMO LabelWriter Twin Turbo, DYMO, Up to 12 Mb/sec, 500 mA USB Device: USB 2.0 CD + HDD, DMI, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMate, USB To ADB Adaptor, Griffin Technology, Inc., Up to 1.5 Mb/sec, 500 mA USB Device: Hub in Apple Pro Keyboard, Alps Electric, Up to 12 Mb/sec, 500 mA USB Device: Griffin PowerMate, Griffin Technology, Inc., Up to 1.5 Mb/sec, 100 mA

  Read the article

• ruby regex, parsing html

  - by danwoods

  Hello all, I'm trying to parse some returned html to look for currently playing movies. The pattern I'm trying to match looks like: <span dir=ltr>Clash of the Titans</span> Of which there are several in the returned html. (the html is huge, I've posted a sample at the bottom) I'm trying get an array of the movie titles with the following command: titles = listings_html.split(/(<span dir=ltr>).*(<\/span>)/) But I'm not getting the results I'm expecting. Can anyone see a problem with my approach or regex? Returned html (I believe the 'markdown'formating will render the some of the html, but this is just an example): <script>window.gbar={};(function(){function h(a,b,d){var c="on"+b;if(a.addEventListener)a.addEventListener(b,d,false);else if(a.attachEvent)a.attachEvent(c,d);else{var f=a[c];a[c]=function(){var e=f.apply(this,arguments),g=d.apply(this,arguments);return e==undefined?g:g==undefined?e:g&&e}}};var i=window.gbar,k,l,m;function n(a){var b=window.encodeURIComponent&&(document.forms[0].q||"").value;if(b)a.href=a.href.replace(/([?&])q=[^&]*|$/,function(d,c){return(c||"&")+"q="+encodeURIComponent(b)})}i.qs=n;function o(a,b,d,c,f,e){var g=document.getElementById(a);if(g){var j=g.style;j.left=c?"auto":b+"px";j.right=c?b+"px":"auto";j.top=d+"px";j.visibility=l?"hidden":"visible";if(f&&e){j.width=f+"px";j.height=e+"px"}else{o(k,b,d,c,g.offsetWidth,g.offsetHeight);l=l?"":a}}}i.tg=function(a){a=a||window.event;var b,d=a.target||a.srcElement;a.cancelBubble=true;if(k!=null)p(d);else{b=document.createElement(Array.every||window.createPopup?"iframe":"div");b.frameBorder="0";k=b.id="gbs";b.src="javascript:''";d.parentNode.appendChild(b);h(document,"click",i.close);p(d);i.alld&&i.alld(function(){var c=document.getElementById("gbli");if(c){var f=c.parentNode;q(f,c);var e=c.prevSibling;f.removeChild(c);i.removeExtraDelimiters(f,e);b.style.height=f.offsetHeight+"px"}})}};function r(a){var b,d=document.defaultView;if(d&&d.getComputedStyle){if(a=d.getComputedStyle(a,""))b=a.direction}else b=a.currentStyle?a.currentStyle.direction:a.style.direction;return b=="rtl"}function p(a){var b=0;if(a.className!="gb3")a=a.parentNode;var d=a.getAttribute("aria-owns")||"gbi",c=a.offsetWidth,f=a.offsetTop>20?46:24,e=false;do b+=a.offsetLeft||0;while(a=a.offsetParent);a=(document.documentElement.clientWidth||document.body.clientWidth)-b-c;c=r(document.body);if(d=="gbi"){var g=document.getElementById("gbi");q(g,document.getElementById("gbli")||g.firstChild);if(c){b=a;e=true}}else if(!c){b=a;e=true}l!=d&&i.close();o(d,b,f,e)}i.close=function(){l&&o(l,0,0)};function s(a,b,d){if(!m){m="gb2";if(i.alld){var c=i.findClassName(a);if(c)m=c}}a.insertBefore(b,d).className=m}function q(a,b){for(var d,c=window.navExtra;c&&(d=c.pop());)s(a,d,b)}i.addLink=function(a,b,d){if((b=document.getElementById(b))&&a){a.className="gb4";var c=document.createElement("span");c.appendChild(a);c.appendChild(document.createTextNode(" | "));c.id=d;b.appendChild(c)}}})();if(!window.google)window.google={};if(!window.google.movies)window.google.movies={};window.google.movies.registerFixdir=function(){var c="[\u0000- !-@[-{-\u00bf\u00d7\u00f7\u02b9-\u02ff\u2000-\u2bff]",g=new RegExp("^"+c+"([0-9]"+c+"$|[A-Za-z\u00c0-\u00d6\u00d8-\u00f6\u00f8-\u02b8\u0300-\u0590\u0800-\u1fff\u2c00-\ufb1c\ufdfe-\ufe6f\ufefd-\uffff])"),h=new RegExp("^"+c+"$");function e(d,a){if(!a)a=d&&d.target?d.target:window.event.srcElement;a.dir=g.test(a.value)?"ltr":(h.test(a.value)?"":"rtl")} var i=[document.getElementsByName("q")[0],document.getElementById("mtq")];for(var f=0,b;b=i[f];f++)if(b){b.onkeyup=e;e(null,b)}}; Movie Showtimes - Google Search.fl:link{}a:link,.w,a.w:link,.w a:link{color:#00c}a:visited{color:#551a8b}a:active{color:red}.t a:link,.t a:active,.t a:visited,.t{color:#000}.left{width:12em}.box{background:#fff}.nopadding{padding:0}.k{background:#36c}.z{display:none}.x{width:3em}.y{width:23em}.b{color:#00c;font-size:12pt;font-weight:bold}.i,.i:link{color:#a90a08}.n a{color:#000;font-size:10pt}.n .b a{color:#00c}.n .i{font-size:10pt;font-weight:bold}.h{cursor:pointer}body{background:#fff;font:82% Arial,Helvetica,sans-serif;margin:3px 0 0;padding:0}table{border-collapse:collapse;border-spacing:0}img{border:0}td,th{vertical-align:top}h1,h2{font-size:100%;margin:0}a{color:#00c}/ CSS for page */#title_bar{background:#f0f7f9;border-top:1px solid #6b90da;padding-bottom:4px;padding-left:8px;padding-top:4px}#google_bar{margin:3px 10px}#search_form{margin:3px 10px}#left_nav{border-right:1px solid #c9d7f1;margin-top:11px;position:absolute;left:9px;width:13.4em}#left_nav .section{margin-bottom:1.2em}.hidden{visibility:hidden}#results{height:auto !important;height:350px;margin-left:15em;min-height:350px;min-width:800px;width:expression(document.body.clientWidth<1000?"800px":"99.9%")}.name{font-size:124%;margin:0}.times{clear:both;margin:0}.address{margin:0}#movie_results{overflow:auto}.movie_results{margin-top:11px}.movie{clear:both;margin-bottom:40px}.movie .header{padding-left:8px}.movie .img{border:1px solid #ccc;float:left;margin-bottom:10px}.movie .desc{margin-bottom:15px;max-width:42em}.movie h2{font-size:124%;margin-bottom:2px}.movie .info{margin-bottom:10px}.movie .syn{margin-bottom:10px}.movie .section_title{background:#f0f7f9;clear:both;font-size:108%;margin-bottom:11px;margin-top:11px;padding-bottom:4px;padding-left:8px;padding-top:5px}.movie .showtimes{margin-bottom:8px;padding-left:8px}.movie .show_left{width:49%}.movie .show_right{width:49%}.movie .theater{padding-bottom:15px}.theater{clear:both;padding-bottom:1px}.theater_after_icon{padding-left:25px}.theater .show_left{width:49%}.theater .show_right{width:49%}.theater h2{font-size:124%;margin-bottom:2px}.theater .icon{float:left;height:3em;margin-right:5px}.theater .closure{font-size:100%}.theater .info{font-size:100%;padding-bottom:5px;padding-top:5px}.theater .movie{margin-bottom:8px;margin-right:8px;max-width:42em}.theater .movie .desc{margin-bottom:5px;margin-left:0}.theater .movie .info{margin-top:0}.theater .showtimes{margin-bottom:40px;margin-top:8px}#theater_map{right:0;left:0;position:relative;top:0}#theater_static_map{border:1px solid #c9d7f1;margin:10px}.map_marker .name{margin-top:10px}.photo{border:1px solid #ccc;margin-bottom:20px;margin-left:8px}.show_left{float:left;margin:0;width:49.999%}.show_right{float:right;margin:0;width:50%}.show_more{clear:both;font-size:124%;margin:0}.show_more a{color:#77c}.reviews{margin-bottom:8px;padding-left:8px}.review{margin-bottom:5px}.review .publisher{color:green}.review .date{color:#6f6f6f}.trailer{margin-bottom:8px;padding-left:8px}.clear{clear:both}.iconA{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 0}.iconB{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -38px}.iconC{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -76px}.iconD{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -114px}.iconE{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -152px}.iconF{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -190px}.iconG{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -228px}.iconH{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -266px}.iconI{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -304px}.iconJ{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -342px}.iconK{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 0}.iconL{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -38px}.iconM{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -76px}.iconN{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -114px}.iconO{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -152px}.iconP{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -190px}.iconQ{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -228px}.iconR{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -266px}.iconS{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -304px}.iconT{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -342px}.iconU{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -380px}.iconV{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -418px}.iconW{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -456px}.iconX{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -494px}.iconY{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -532px}.iconZ{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -570px}#gbar,#guser{font-size:13px;padding-top:1px !important}#gbar{float:left;height:22px}#guser{padding-bottom:7px !important;text-align:right}.gbh,.gbd{border-top:1px solid #c9d7f1;font-size:1px}.gbh{height:0;position:absolute;top:24px;width:100%}#gbs,.gbm{background:#fff;left:0;position:absolute;text-align:left;visibility:hidden;z-index:1000}.gbm{border:1px solid;border-color:#c9d7f1 #36c #36c #a2bae7;z-index:1001}.gb1{margin-right:.5em}.gb1,.gb3{zoom:1}.gb2{display:block;padding:.2em .5em;}.gb2,.gb3{text-decoration:none;border-bottom:none}a.gb1,a.gb2,a.gb3,a.gb4{color:#00c !important}.gbi .gb3,.gbi .gb2,.gbi .gb4{color:#dd8e27 !important}.gbf .gb3,.gbf .gb2,.gbf .gb4{color:#900 !important}a.gb2:hover{background:#36c;color:#fff !important}Web Images Videos Maps News Shopping Gmail more ▼Books Finance Translate Scholar Blogs YouTube Calendar Photos Documents Reader Sites Groups even more » [email protected] | Google Account settings | Sign out     Advanced Search  PreferencesShowtimes for Murfreesboro, TN 37130Change Location› Today › Tomorrow › Monday › Tuesday› Theaters › Movies› Show list view › Show map viewPremiere 6 Theater810 Northwest Broad Street, Murfreesboro, TN - (615) 896-4100Clash of the Titans? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - Trailer - IMDb2:10  4:15  6:15  8:20  10:25pmDiary of a Wimpy Kid? - 1hr 33min?? - Rated PG?? - Comedy/Drama? - Trailer - IMDb2:00  3:50  6:00  7:50  9:40pmHow to Train Your Dragon?1hr 38min?? - Rated PG?? - Family/Animation? - IMDb2:00  3:55  6:00  7:55  9:50pmThe Bounty Hunter? - 1hr 46min?? - Rated PG-13?? - Action/Adventure/Comedy/Romance? - Trailer - IMDb2:15  4:15  6:25  8:25  10:30pmThe Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb2:20  4:15  6:30  8:35  10:35pmTyler Perry's Why Did I Get Married Too?2hr 1min?? - Rated PG-13?? - Comedy?2:20  4:35  7:30  9:45pmContinental Cinema 5450 US Highway 231 N, Troy, AL - (334) 808-4225Clash of the Titans 3D? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - IMDb1:00  4:00  7:00  9:30pmHow to Train Your Dragon 3D? - 1hr 38min?? - Rated PG?? - Family/Animation? - IMDb1:05  4:05  7:05  9:25pmThe Bounty Hunter? - 1hr 46min?? - Rated PG-13?? - Action/Adventure/Comedy/Romance? - Trailer - IMDb1:00  4:00  7:00  9:30pmThe Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb1:05  4:05  7:05  9:25pmTyler Perry's Why Did I Get Married Too?2hr 1min?? - Rated PG-13?? - Comedy?12:55  3:55  6:55  9:35pmMall Cinema - Hartford KYUS Hwy 231 South 62 East, Hartford, KY - (270) 298-3315Clash of the Titans? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - Trailer - IMDb5:00  7:00  9:00pmHow to Train Your Dragon?1hr 38min?? - Rated PG?? - Family/Animation? - IMDb5:00  7:00  9:00pmCarmike Wynnsong 16 - Murfreesboro2626 Cason Square Boulevard, Murfreesboro, TN - (615) 893-2253The Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb12:15  1:00  2:45  4:00  5:15  7:00  7:45 

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• Inspire Geek Love with These Hilarious Geek Valentines

  - by Eric Z Goodnight

  Want to send some Geek Love to that special someone? Why not do it with these elementary school throwback valentines, and win their heart this upcoming Valentine’s day—the geek way! Read on to see the simple method to make your own custom Valentines, as well as download a set of eleven ready-made ones any geek guy or gal should be delighted get. It’s amore! How to Make Custom Valentines A size we’ve used for all of our Valentines is a 3” x 4” at 150 dpi. This is fairly low resolution for print, but makes a great graphic to email. With your new image open, Navigate to Edit > Fill and fill your background layer with a rich, red color (or whatever appeals to you.) By setting “Use” to “Foreground color as shown above, you’ll paint whatever foreground color you have in your color picker. Press to select the text tool. Set a few text objects, using whatever fonts appeal to you. Pixel fonts, like this one, are freely downloadable, and we’ve already shared a great list of Valentines fonts. Copy an image from the internet if you’re confident your sweetie won’t mind a bit of fair use of copyrighted imagery. If they do mind, find yourself some great Creative Commons images. to do a free transform on your image, sizing it to whatever dimensions work best for your design. Right click your newly added image layer in your panel and Choose “Blending Effects” to pick a Layer Style. “Stroke” with this setting adds a black line around your image. Also turning on “Outer Glow” with this setting puts a dark black shadow around the top and bottom (and sides, although they are hidden). Add some more text. Double entendre is recommended. Click and hold down on the “Rectangle Tool” to get the “Custom Shape Tool.” The custom shape tool has useful vector shapes built into it. Find the “Shape” dropdown in the menu to find the heart image. Click and drag to create a vector heart shape in your image. Your layers panel is where you can change the color, if it happens to use the wrong one at first. Click the color swatch in your panel, highlighted in blue above. will transform your vector heart. You can also use it to rotate, if you like. Add some details, like this Power or Standby symbol, which can be found in symbol fonts, taken from images online, or drawn by hand. Your Valentine is now ready to be saved as a JPG or PNG and sent to the object of your affection! Keep reading to see a list of 11 downloadable How-To Geek Valentines, including this one and the three from the header image. Download The HTG Set of Valentines Download the HTG Geek Valentines (ZIP) Download the HTG Geek Valentines (ZIP) When he’s not wooing ladies with Valentines cards, you can email the author at [email protected] with your Photoshop and Graphics questions. Your questions may be featured in a future How-To Geek article! Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

  Read the article

• The Challenge with HTML5 – In Pictures

  - by dwahlin

  I love working with Web technologies and am looking forward to the new functionality that HTML5 will ultimately bring to the table (some of which can be used today). Having been through the div versus layer battle back in the IE4 and Netscape 4 days I think we’re headed down that road again as a result of browsers implementing features differently. I’ve been spending a lot of time researching and playing around with HTML5 samples and features (mainly because we’re already seeing demand for training on HTML5) and there’s a lot of great stuff there that will truly revolutionize web applications as we know them. However, browsers just aren’t there yet and many people outside of the development world don’t really feel a need to upgrade their browser if it’s working reasonably well (Mom and Dad come to mind) so it’s going to be awhile. There’s a nice test site at http://www.HTML5Test.com that runs through different HTML5 features and scores how well they’re supported. They don’t test for everything and are very clear about that on the site: “The HTML5 test score is only an indication of how well your browser supports the upcoming HTML5 standard and related specifications. It does not try to test all of the new features offered by HTML5, nor does it try to test the functionality of each feature it does detect. Despite these shortcomings we hope that by quantifying the level of support users and web developers will get an idea of how hard the browser manufacturers work on improving their browsers and the web as a development platform. The score is calculated by testing for the many new features of HTML5. Each feature is worth one or more points. Apart from the main HTML5 specification and other specifications created the W3C HTML Working Group, this test also awards points for supporting related drafts and specifications. Some of these specifications were initially part of HTML5, but are now further developed by other W3C working groups. WebGL is also part of this test despite not being developed by the W3C, because it extends the HTML5 canvas element with a 3d context. The test also awards bonus points for supporting audio and video codecs and supporting SVG or MathML embedding in a plain HTML document. These test do not count towards the total score because HTML5 does not specify any required audio or video codec. Also SVG and MathML are not required by HTML5, the specification only specifies rules for how such content should be embedded inside a plain HTML file. Please be aware that the specifications that are being tested are still in development and could change before receiving an official status. In the future new tests will be added for the pieces of the specification that are currently still missing. The maximum number of points that can be scored is 300 at this moment, but this is a moving goalpost.” It looks like their tests haven’t been updated since June, but the numbers are pretty scary as a developer because it means I’m going to have to do a lot of browser sniffing before assuming a particular feature is available to use. Not that much different from what we do today as far as browser sniffing you say? I’d have to disagree since HTML5 takes it to a whole new level. In today’s world we have script libraries such as jQuery (my personal favorite), Prototype, script.aculo.us, YUI Library, MooTools, etc. that handle the heavy lifting for us. Until those libraries handle all of the key HTML5 features available it’s going to be a challenge. Certain features such as Canvas are supported fairly well across most of the major browsers while other features such as audio and video are hit or miss depending upon what codec you want to use. Run the tests yourself to see what passes and what fails for different browsers. You can also view the HTML5 Test Suite Conformance Results at http://test.w3.org/html/tests/reporting/report.htm (a work in progress). The table below lists the scores that the HTML5Test site returned for different browsers I have installed on my desktop PC and laptop. A specific list of tests run and features supported are given when you go to the site. Note that I went ahead and tested the IE9 beta and it didn’t do nearly as good as I expected it would, but it’s not officially out yet so I expect that number will change a lot. Am I opposed to HTML5 as a result of these tests? Of course not - I’m actually really excited about what it offers.  However, I’m trying to be realistic and feel it'll definitely add a new level of headache to the Web application development process having been through something like this many years ago. On the flipside, developers that are able to target a specific browser (typically Intranet apps) or master the cross-browser issues are going to release some pretty sweet applications. Check out http://html5gallery.com/ for a look at some of the more cutting-edge sites out there that use HTML5. Also check out the http://www.beautyoftheweb.com site that Microsoft put together to showcase IE9. Chrome 8 Safari 5 for Windows     Opera 10 Firefox 3.6     Internet Explorer 9 Beta (Note that it’s still beta) Internet Explorer 8

  Read the article

• Windows Presentation Foundation 4.5 Cookbook Review

  - by Ricardo Peres

  As promised, here’s my review of Windows Presentation Foundation 4.5 Cookbook, that Packt Publishing kindly made available to me. It is an introductory book, targeted at WPF newcomers or users with few experience, following the typical recipes or cookbook style. Like all Packt Publishing books on development, each recipe comes with sample code that is self-sufficient for understanding the concepts it tries to illustrate. It starts on chapter 1 by introducing the most important concepts, the XAML language itself, what can be declared in XAML and how to do it, what are dependency and attached properties as well as markup extensions and events, which should give readers a most required introduction to how WPF works and how to do basic stuff. It moves on to resources on chapter 2, which also makes since, since it’s such an important concept in WPF. Next, chapter 3, come the panels used for laying controls on the screen, all of the out of the box panels are described with typical use cases. Controls come next in chapter 4; the difference between elements and controls is introduced, as well as content controls, headered controls and items controls, and all standard controls are introduced. The book shows how to change the way they look by using templates. The next chapter, 5, talks about top level windows and the WPF application object: how to access startup arguments, how to set the main window, using standard dialogs and there’s even a sample on how to have a irregularly-shaped window. This is one of the most important concepts in WPF: data binding, which is the theme for the following chapter, 6. All common scenarios are introduced, the binding modes, directions, triggers, etc. It talks about the INotifyPropertyChanged interface and how to use it for notifying data binding subscribers of changes in data sources. Data templates and selectors are also covered, as are value converters and data triggers. Examples include master-detail and sorting, grouping and filtering collections and binding trees and grids. Last it covers validation rules and error templates. Chapter 7 talks about the current trend in WPF development, the Model View View-Model (MVVM) framework. This is a well known pattern for connecting things interface to actions, and it is explained competently. A typical implementation is presented which also presents the command pattern used throughout WPF. A complete application using MVVM is presented from start to finish, including typical features such as undo. Style and layout is covered on chapter 8. Why/how to use styles, applying them automatically,  using the many types of triggers to change styles automatically, using Expression Blend behaviors and templates are all covered. Next chapter, 9, is about graphics and animations programming. It explains how to create shapes, transform common UI elements, apply special effects and perform simple animations. The following chapter, 10, is about creating custom controls, either by deriving from UserControl or from an existing control or framework element class, applying custom templates for changing the way the control looks. One useful example is a custom layout panel that arranges its children along a circumference. The final chapter, 11, is about multi-threading programming and how one can integrate it with WPF. Includes how to invoke methods and properties on WPF classes from threads other than the main UI, using background tasks and timers and even using the new C# 5.0 asynchronous operations. It’s an interesting book, like I said, mostly for newcomers. It provides a competent introduction to WPF, with examples that cover the most common scenarios and also give directions to more complex ones. I recommend it to everyone wishing to learn WPF.

  Read the article

• default xna 4.0 gametime don´t works well for 2D physics

  - by EusKoder

  I am developing a game using Visual Studio 2010 and XNA 4.0, after advancing to some extent with the project (a platform based 2d platformer msdn starter kit) I got to test it on different computers with different hardware (CPU, graphics, etc.) and I found that the speed of movement object of the game is quite different, I implemented the PSK physics msdn that are based on time, /// <summary> /// Updates the player's velocity and position based on input, gravity, etc. /// </summary> public void ApplyPhysics(GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; Vector2 previousPosition = Position; // Base velocity is a combination of horizontal movement control and // acceleration downward due to gravity. velocity.X += movement * MoveAcceleration * elapsed; velocity.Y = MathHelper.Clamp(velocity.Y + GravityAcceleration * elapsed, -MaxFallSpeed, MaxFallSpeed); velocity.Y = DoJump(velocity.Y, gameTime); // Apply pseudo-drag horizontally. if (IsOnGround) velocity.X *= GroundDragFactor; else velocity.X *= GroundDragFactor; //velocity.X *= AirDragFactor; // Prevent the player from running faster than his top speed. velocity.X = MathHelper.Clamp(velocity.X, -MaxMoveSpeed, MaxMoveSpeed); // Apply velocity. Position += velocity *elapsed; Position = new Vector2((float)Math.Round(Position.X), (float)Math.Round(Position.Y)); // If the player is now colliding with the level, separate them. HandleCollisions(gameTime); // If the collision stopped us from moving, reset the velocity to zero. if (Position.X == previousPosition.X) velocity.X = 0; if (Position.Y == previousPosition.Y) { velocity.Y = 0; jumpTime = 0.0f; } } tested eg with a PC (PC1) 2.13GHz Intel Core 2 6400 / ATI Radeon HD 4670 and another one: (pc2) 3.00GHz Intel Pentium D / Intel 82945G Express Chipset Family by displacement difference (moving x axis at supossed (position = velocity * gametime.ElapsedGameTime.TotalSeconds) constant velocity, for example) is 3 seconds in a total of 20 (example: moving pc1 player sprite 6000 pixels in the x-axis at 20 seconds and pc 2 runs the same distance in 17 ). Tested on a 3rd PC: i72700k / Gigabyte GTX 560 TI the results are even worse, after some time after starting the game gets like 3 times slower and showing the number of pixels in each frame moved in a debug window in the game (counting updatespersecond with counter variable for updates cuantity and gametime for counting a second show 63fps), it appears as if the number is always constant ( refreshments lose the Update method?). In this pc if I put the game in fullscreen during the course of the game, the effect of "go slow" is immediate and restore window mode sometimes yield returns to "normal" and sometimes not. Eventually I began to try a new project to test whether the movement is constant in different pc loading only one sprite and its position value in screen printing. Occur The same. I even tried moving a constant amount of pixels explicitly (position + = 5) and different speeds in different pc quantities of pixels moved in x time. I have the game loop as the default (fixedTimeStep=true;SynchronizeWithVerticalRetrace=true;). I've also tried turning off and creating another timestep as discussed in different post (eg http://gafferongames.com/game-physics/fix-your-timestep/ but i can´t achieve the desired result, move the same number of pixels in X seconds on different computers with windows. All pc used for tests use windows 7 enterprise pc1 == x86 the others are x64. The weirdest thing is that I find information about people describing the same problem and that I wear long nights of searches. Thanks for your help.

  Read the article

• Building the Elusive Windows Phone Panorama Control

  When the Windows Phone 7 Developer SDK was released a couple of weeks ago at MIX10 many people noticed the SDK doesnt include a template for a Panorama control.   Here at Clarity we decided to build our own Panorama control for use in some of our prototypes and I figured I would share what we came up with. There have been a couple of implementations of the Panorama control making their way through the interwebs, but I didnt think any of them really nailed the experience that is shown in the simulation videos.   One of the key design principals in the UX Guide for Windows Phone 7 is the use of motion.  The WP7 OS is fairly stripped of extraneous design elements and makes heavy use of typography and motion to give users the necessary visual cues.  Subtle animations and wide layouts help give the user a sense of fluidity and consistency across the phone experience.  When building the panorama control I was fairly meticulous in recreating the motion as shown in the videos.  The effect that is shown in the application hubs of the phone is known as a Parallax Scrolling effect.  This this pseudo-3D technique has been around in the computer graphics world for quite some time. In essence, the background images move slower than foreground images, creating an illusion of depth in 2D.  Here is an example of the traditional use: http://www.mauriciostudio.com/.  One of the animation gems I've learned while building interactive software is the follow animation.  The premise is straightforward: instead of translating content 1:1 with the interaction point, let the content catch up to the mouse or finger.  The difference is subtle, but the impact on the smoothness of the interaction is huge.  That said, it became the foundation of how I achieved the effect shown below.   Source Code Available HERE Before I briefly describe the approach I took in creating this control..and Ill add some **asterisks ** to the code below as my coding skills arent up to snuff with the rest of my colleagues.  This code is meant to be an interpretation of the WP7 panorama control and is not intended to be used in a production application.  1.  Layout the XAML The UI consists of three main components :  The background image, the Title, and the Content.  You can imagine each  these UI Elements existing on their own plane with a corresponding Translate Transform to create the Parallax effect.  2.  Storyboards + Procedural Animations = Sexy As I mentioned above, creating a fluid experience was at the top of my priorities while building this control.  To recreate the smooth scroll effect shown in the video we need to add some place holder storyboards that we can manipulate in code to simulate the inertia and snapping.  Using the easing functions built into Silverlight helps create a very pleasant interaction.    3.  Handle the Manipulation Events With Silverlight 3 we have some new touch event handlers.  The new Manipulation events makes handling the interactivity pretty straight forward.  There are two event handlers that need to be hooked up to enable the dragging and motion effects: the ManipulationDelta event :  (the most relevant code is highlighted in pink) Here we are doing some simple math with the Manipulation Deltas and setting the TO values of the animations appropriately. Modifying the storyboards dynamically in code helps to create a natural feel.something that cant easily be done with storyboards alone.   And secondly, the ManipulationCompleted event:  Here we take the Final Velocities from the Manipulation Completed Event and apply them to the Storyboards to create the snapping and scrolling effects.  Most of this code is determining what the next position of the viewport will be.  The interesting part (shown in pink) is determining the duration of the animation based on the calculated velocity of the flick gesture.  By using velocity as a variable in determining the duration of the animation we can produce a slow animation for a soft flick and a fast animation for a strong flick. Challenges to the Reader There are a couple of things I didnt have time to implement into this control.  And I would love to see other WPF/Silverlight approaches.  1.  A good mechanism for deciphering when the user is manipulating the content within the panorama control and the panorama itself.   In other words, being able to accurately determine what is a flick and what is click. 2.  Dynamically Sizing the panorama control based on the width of its content.  Right now each control panel is 400px, ideally the Panel items would be measured and then panorama control would update its size accordingly.  3.  Background and content wrapping.  The WP7 UX guidelines specify that the content and background should wrap at the end of the list.  In my code I restrict the drag at the ends of the list (like the iPhone).  It would be interesting to see how this would effect the scroll experience.     Well, Its been fun building this control and if you use it Id love to know what you think.  You can download the Source HERE or from the Expression Gallery  Erik Klimczak  | [email protected] | twitter.com/eklimczDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Silverlight Cream for March 28, 2010 -- #823

  - by Dave Campbell

  In this Issue: Michael Washington, Andy Beaulieu, Bill Reiss, jocelyn, Shawn Wildermuth, Cameron Albert, Shawn Oster, Alex Yakhnin, ondrejsv, Giorgetti Alessandro, Jeff Handley, SilverLaw, deepm, and Kyle McClellan. Shoutouts: If I've listed this before, it's worth another... Introduction to Prototyping with SketchFlow (twelve video series) and on the same page is Creating a Beehive Game with Behaviors in Blend 3 (ten video series) Shawn Oster announced his Slides + Code + Video from ‘An Introduction to Developing Applications for Microsoft Silverlight’ from MIX10 Tim Heuer announced earlier this week: Silverlight Client for Facebook updated for Silverlight 4 RC Nikhil Kothari announced the availability of his MIX10 Talk - Slides and Code András Velvárt backed up his great MIX09 effort with MIX10.Zoomery.com... everything in one DZ effort... thanks András! Andy Beaulieu posted his material for his Code Camp 13 in Waltham: Windows Phone: Silverlight for Casual Games From SilverlightCream.com: Silverlight MVVM - The Revolution Has Begun Michael Washington did an awesome tutorial on MVVM and Silverlight creating a simple Silverlight File Manager. The post has a link to the tutorial at CodeProject... great tutorial. Windows Phone 7 + Silverlight Performance Andy Beaulieu has a post up we should all bookmark... getting a handle on the graphics performance of our app on WP7. Great examples, and external links. Space Rocks game step 6: Keyboard handling Bill Reiss has a post up about keyboard input for the WP7 game he's building ... this is Episode 6 ... you're working along with him, right? Panoramic Navigation on Windows Phone 7 with No Code! jocelyn at InnovativeSingapore (I found this by way of Shawn's post), has a Panoramic Navigation template out there for WP7 for all of us to grab... great post about it too. My First WP7 Application Shawn Wildermuth has been playing with WP7 development and has his XBOX Game library app up on the emulator... all with source of course Silverlight and Windows Phone 7 Game Cameron Albert built a web-based game called 'Shape Attack' and also did it for WP7 to compare the performance... check it out for yourself, but hey, it's game source for the phone... cool :) Changing the Onscreen Keyboard layout in Silverlight for Windows Phone using InputScope Shawn Oster has a cool post on changing the keyboard on WP7 to go along with what you're expecting the user to type... how cool is that?? Deep Zoom on WP7 Check out the quick work Alex Yakhnin made of putting DeepZoom on WP7... all source included. How to: Create a sketchy Siverlight GroupBox in Blend/SketchFlow ondrejsv has the xaml up to take Tim Greenfield's GroupBox control and insert it into SketchFlow. Silverlight / Castle Windsor – implementing a simple logging framework Giorgetti Alessandro posted about CastleWindsor for Silverlight, and a logging system inherited from LevelFilteredLogger in the absence of Log4Net. DomainDataSource in a ViewModel Jeff Handley responds to a common forum post about using DomainDataSource in a ViewModel. Read his comments on AutoLoad and ElementName Bindins. Digital Jugendstil TextEffect (Art Nouveau) - Silverlight 3 SilverLaw has a cool TagCloud demo and a UserControl he calls Art Nouveau up at the Expression Gallery... not for a business app, I don't think :) Configuring your DomainService for a Windows Phone 7 application deepm discusses RIA Services for WP7 and how to enable a WP7 app to communicate with a DomainService. Writing a Custom Filter or Parameter for DomainDataSource Kyle McClellan by way of Jeff Handley's blog, is discussing how to leverage the custom parameter types you defined in the previous version of RIA Services. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Install GIMP 2.7.1 on Lucid Lynx using PPA

  - by Vivek

  GIMP lovers are going to be disappointed to hear that GIMP is going away in the next release of much awaited Ubuntu 10.04. Today we take a look at installing in on Lucid Lynx using PPA. The reason for getting rid of it as cited by the GIMP developers, is that GIMP is too professional a software to be included in regular desktop version of Ubuntu. And it takes up too much of space on the disk. Also, the fact that it’s too complicated for regular users. If you can’t live without it…let’s see how to install GIMP 2.7.1 on Lucid Lynx (Currently in Alpha). The new version of GIMP supports single window mode and we will also see how to enable this feature as well. First we need to add the official GIMP 2.7.1 PPA in the software sources of Ubuntu 10.04, by opening the terminal window and typing the following command: sudo sh -c “echo ‘deb http://ppa.launchpad.net/matthaeus123/mrw-gimp-svn/ubuntu lucid main’ >> /etc/apt/sources.list” Now that we have added the PPA we need to add the GPG key, so type the following in your Terminal window. sudo apt-key adv –recv-keys –keyserver keyserver.ubuntu.com 405A15CB Next up we have to update the software repository… sudo apt-get update All that is left is to install GIMP 2.7.1 by typing in the following… sudo apt-get install gimp Click ‘Y’ (for yes) to install GIMP Once GIMP is installed you can start it by going to Applications > Graphics > GNU Image Manipulation Program. You now have your favorite GIMP on your favorite Ubuntu 10.04. As you can see in the image below, GIMP still comes with default 3 windows, which could clog up your lower panel In Ubuntu 10.04. However, now you can run GIMP in single window mode by going to Windows > Single-Window mode. That’s all! Now you have your GIMP running in single window mode with less of hassle to manage 3 windows. It’s unfortunate that GIMP will not be included, but by following these instructions, you’ll be able to enjoy using it in Ubuntu 10.04. Similar Articles Productive Geek Tips Show the List of Installed Packages on Ubuntu or DebianHow to Install Windows Applications on Linux Using CrossoverInstall VMware Tools on Ubuntu Edgy EftInstall Adobe PDF Reader on Ubuntu EdgyInstall MySQL Server 4.1 on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements

  Read the article

• Upgrade Office 2003 to 2010 on XP or Run them Side by Side

  - by Mysticgeek

  If you’re still running XP, currently have Office 2003 installed on your machine, and skipped Office 2007, you might want to upgrade to Office 2010. In this guide we will show you the upgrade process or how to run them side by side. In this example we are upgrading from Office 2003 Standard to Office Professional Plus 2010 RTM (Final) on XP Professional. System Requirements To run Office 2010 on your XP machine you have to make sure you have Service Pack 3 and Microsoft Silverlight installed (links below). Or you can just install them through Windows Update. Recommended Hardware 1GHZ CPU or higher 512 MB of RAM or higher 1024×768 Resolution or higher DirectX 9.0c compatible graphics card with 64 MB of memory or higher Installing Office 2010 Simply kick off the Office Professional Plus 2010 installation. Enter in your product key… Agree to the EULA…   Select the Customize button… Setup will detect Office 2003 and allow you to remove all applications, keep them, or select only the ones you want to keep. In this example we’re going to remove Excel and PowerPoint, and keep Outlook and Word 2003. Next, click the Installation Options tab and select Office programs you want to install. Since we’re keeping Outlook 2003 and don’t want to use Outlook 2010, we’re making sure not to install Outlook 2010. However, we want to run Word 2003 and 2010 on the same machine. After you’ve made your selections click the Upgrade button. The installation begins and you’re shown the progress. The amount of time it takes to install will vary between systems. Installation is complete and you can close out of the installer. Now when you go into the Start menu under Microsoft Office, you’ll see both versions of the Office apps available. Here is a shot of Word 2003 and 2010 running together on our XP machine.   Conclusion If you’re moving from Office 2003 to 2010, this allows you to install both versions side by side. It gives you a chance to learn 2010 features, and still work in the familiar 2003 environment when you need to get things done quickly. If you’re having problems installing Office 2010 make sure to check out our article on how to fix problems upgrading Office 2010 beta to RTM (Final) release. Also, if you were using Office 2007 and are currently using the 2010 beta, we have a guide on how to switch back to Office 2007 after the 2010 beta ends. Links XP Service Pack 3 Microsoft Silverlight Details on Office 2010 System Requirements Similar Articles Productive Geek Tips Add Word/Excel 97-2003 Documents Back to the "New" Context Menu After Installing Office 2007Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 FormatRemove Office 2010 Beta and Reinstall Office 2007How to Find Office 2003 Commands in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam

  Read the article

• From the Tips Box: Pre-installation Prep Work Makes Service Pack Upgrades Smoother

  - by Jason Fitzpatrick

  Last month Microsoft rolled out Windows 7 Service Pack 1 and, like many SP releases, quite a few people are hanging back to see what happens. If you want to update but still error on the side of caution, reader Ron Troy  offers a step-by-step guide. Ron’s cautious approach does an excellent job minimizing the number of issues that could crop up in a Service Pack upgrade by doing a thorough job updating your driver sets and clearing out old junk before you roll out the update. Read on to see how he does it: Just wanted to pass on a suggestion for people worried about installing Service Packs.  I came up with a ‘method’ a couple years back that seems to work well. Run Windows / Microsoft Update to get all updates EXCEPT the Service Pack. Use Secunia PSI to find any other updates you need. Use CCleaner or the Windows disk cleanup tools to get rid of all the old garbage out there.  Make sure that you include old system updates. Obviously, back up anything you really care about.  An image backup can be real nice to have if things go wrong. Download the correct SP version from Microsoft.com; do not use Windows / Microsoft Update to get it.  Make sure you have the 64 bit version if that’s what you have installed on your PC. Make sure that EVERYTHING that affects the OS is up to date.  That includes all sorts of drivers, starting with video and audio.  And if you have an Intel chipset, use the Intel Driver Utility to update those drivers.  It’s very quick and easy.  For the video and audio drivers, some can be updated by Intel, some by utilities on the vendor web sites, and some you just have to figure out yourself.  But don’t be lazy here; old drivers and Windows Service Packs are a poor mix. If you have 3rd party software, check to see if they have any updates for you.  They might not say that they are for the Service Pack but you cut your risk of things not working if you do this. Shut off the Antivirus software (especially if 3rd party). Reboot, hitting F8 to get the SafeMode menu.  Choose SafeMode with Networking. Log into the Administrator account to ensure that you have the right to install the SP. Run the SP.  It won’t be very fancy this way.  Maybe 45 minutes later it will reboot and then finish configuring itself, finally letting you log in. Total installation time on most of my PC’s was about 1 hour but that followed hours of preparation on each. On a separate note, I recently got on the Nvidia web site and their utility told me I had a new driver available for my GeForce 8600M GS.  This laptop had come with Vista, now has Win 7 SP1.  I had a big surprise from this driver update; the Windows Experience Score on the graphics side went way up.  Kudo’s to Nvidia for doing a driver update that actually helps day to day usage.  And unlike ATI’s updates (which I need for my AGP based system), this update was fairly quick and very easy.  Also, Nvidia drivers have never, as I can recall, given me BSOD’s, many of which I’ve gotten from ATI (TDR errors).How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

  Read the article

• Sort Your Emails by Conversation in Outlook 2010

  - by Matthew Guay

  Do you prefer the way Gmail sorts your emails by conversation?  Here’s how you can use this handy feature in Outlook 2010 too. One exciting new feature in Outlook 2010 is the ability to sort and link your emails by conversation.  This makes it easier to know what has been discussed in emails, and helps you keep your inbox more tidy.  Some users don’t like their emails linked into conversations, and in the final release of Outlook 2010 it is turned off by default.  Since this is a new feature, new users may overlook it and never know it’s available.  Here’s how you can enable conversation view and keep your email conversations accessible and streamlined. Activate Conversation View By default, your inbox in Outlook 2010 will look much like it always has in Outlook…a list of individual emails. To view your emails by conversation, select the View tab and check the Show as Conversations box on the top left. Alternately, click on the Arrange By tab above your emails, and select Show as Conversations. Outlook will ask if you want to activate conversation view in only this folder or all folders.  Choose All folders to view all emails in Outlook in conversations. Outlook will now resort your inbox, linking emails in the same conversation together.  Individual emails that don’t belong to a conversation will look the same as before, while conversations will have a white triangle carrot on the top left of the message title.  Select the message to read the latest email in the conversation. Or, click the triangle to see all of the messages in the conversation.  Now you can select and read any one of them. Most email programs and services include the previous email in the body of an email when you reply.  Outlook 2010 can recognize these previous messages as well.  You can navigate between older and newer messages from popup Next and Previous buttons that appear when you hover over the older email’s header.  This works both in the standard Outlook preview pane and when you open an email in its own window.   Edit Conversation View Settings Back in the Outlook View tab, you can tweak your conversation view to work the way you want.  You can choose to have Outlook Always Expand Conversations, Show Senders Above the Subject, and to Use Classic Indented View.  By default, Outlook will show messages from other folders in the conversation, which is generally helpful; however, if you don’t like this, you can uncheck it here.  All of these settings will stay the same across all of your Outlook accounts. If you choose Indented View, it will show the title on the top and then an indented message entry underneath showing the name of the sender. The Show Senders Above the Subject view makes it more obvious who the email is from and who else is active in the conversation.  This is especially useful if you usually only email certain people about certain topics, making the subject lines less relevant. Or, if you decide you don’t care for conversation view, you can turn it off by unchecking the box in the View tab as above. Conclusion Although it may take new users some time to get used to, conversation view can be very helpful in keeping your inbox organized and letting important emails stay together.  If you’re a Gmail user syncing your email account with Outlook, you may find this useful as it makes Outlook 2010 work more like Gmail, even when offline. If you’d like to sync your Gmail account with Outlook 2010, check out our articles on syncing it with POP3 and IMAP. Similar Articles Productive Geek Tips Automatically Move Daily Emails to Specific Folders in OutlookQuickly Clean Your Inbox in Outlook 2003/2007Find Emails With Attachments with Outlook 2007’s Instant SearchAdd Your Gmail Account to Outlook 2010 using POPSchedule Auto Send & Receive in Microsoft Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox)

  Read the article

• Should I upgrade to "Ubuntu 14.04 'Trusty Tahr'" from "Ubuntu 12.04 LTS" and what care do I need to take if I upgrade?

  - by PHPLover

  I'm basically a Web Developer(PHP Developer) by profession. I mainly work on PHP, jQuery, AJAX, Smarty, HTML and CSS, Bootstrap front-end web development framework. I've also installed and using IDEs/editors like Sublime Text, NetBeans. I'm also using Git repository for my website development as a versioning tool. I'm using "Ubuntu 12.04 LTS" on my machine almost since last two years. My machine configuraion is as follows: Memory : 3.7 GiB Processor : Intel® Core™ i3 CPU M 370 @ 2.40GHz × 4 Graphics : Unknown OS type : 64-bit Disk : 64-bit The important softwares present on my machine and which I'm using daily for my work are as follows: PHP : PHP 5.3.10-1ubuntu3.13 with Suhosin-Patch (cli) (built: Jul 7 2014 18:54:55) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies Apache web server : /usr/sbin/apachectl: 87: ulimit: error setting limit (Operation not permitted) Server version: Apache/2.2.22 (Ubuntu) Server built: Jul 22 2014 14:35:25 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.6, APR-Util 1.3.12 Compiled using: APR 1.4.6, APR-Util 1.3.12 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf" MySQL : 5.5.38-0ubuntu0.12.04.1 Smarty : 2.6.18 **NetBeans :** NetBeans IDE 8.0 (Build 201403101706) Sublime Text 2 : Version 2.0.2, Build 2221 Yesterday suddenly a pop-up message appeared on my screen asking me to upgrade to "Ubuntu 14.04 'Trusty Tahr'". I'd also be very happy to upgrade my system to "Ubuntu 14.04 'Trusty Tahr'". Following are the issues about which I'm little bit scared about and I need you all talented people's expert advice/help/suggestions on it: Will upgrading to "Ubuntu 14.04 'Trusty Tahr'" affect the softwares I mentioned above? I mean will I need to re-install/un-install and install these softwares too? Do I really need to and is it really a worth to upgrade to "Ubuntu 14.04 'Trusty Tahr'" from "Ubuntu 12.04 LTS" now? If I upgrade to "Ubuntu 14.04 'Trusty Tahr'" what advantage I'll get from web developer's point of view? Will the upgrade be hassle free and will I be ablr to continue my on-going work without any difficulties? Is "Ubuntu 14.04 'Trusty Tahr'" a LTS version and if yes till when it's going to provide support? These are the five crucial queries I have. If you want any further explanation from me please feel free to ask me. Thanks for spending some of your vaulable time in reading and understanding my issue. Any kind of help/comment/suggestion/answer would be highly appreciated. Though if someone gives canonical, precise and up to the mark answer, it will be of great help to me as well as other web developers using Ubuntu around the world. Once again thank you so much you great people around the globe. Waiting for your precious replies.

  Read the article

• Initial Review - Mastering Unreal Technology I: Introduction to Level Design with Unreal Engine 3

  - by Matt Christian

  Recently I purchased 3 large volumes on using the Unreal 3 Engine to create levels and custom games.  This past weekend I cracked the spine of the first and started reading.  Here are my early impressions (I'm ~250 pages into it, with appendices it's about 900). Pros Interestingly, the book starts with an overview of the Unreal engines leading up to Unreal 3 (including Gears of War) and follows with some discussion on planning a mod and what goes into the game development process.  This is nice for an intro to the book and is much preferred rather than a simple chapter detailing what is on the included CD, how to install and setup UnrealEd, etc...  While the chapter on Unreal history and planning can be considered 'fluff', it's much less 'fluffy' than most books provide. I need to mention one thing here that is pretty crucial in the way I'm going to continue reviewing this book.  Most technical books like this are used as a shelf reference; as a thick volume you use for looking up techniques every now and again.  Even so, I prefer reading from cover to cover, including chapters I may already be knowledgable on (I'm sure this is typical for most people).  If there was a chapter on installing UnrealEd (the previously mentioned 'fluff'), I would probably force myself to read it, even though I've installed the game and engine multiple times on different systems. Chapter 3 is where we really get to the introduction piece of UnrealEd, creating your first basic level.  This large chapter details creating two small rooms, adding static meshes, adding lighting, creating and adding particle emitters, creating a door that animates with Unreal Matinee and Kismet, static meshes with physics, and other little additions to make your level look less beginner.  This really is a chapter that overviews the entire rest of the book, as each chapter following details the creation and intermediate usages of Static Meshes, Materials, Lighting, etc... One other very nice part to this book is the way the tutorials are setup.  Each tutorial builds off the previous and all are step-by-step.  If you haven't completed one yet, you can find all the starting files on the CD that comes with the book. Cons While the description of the overview chapter (Chapter 3) is fresh in your mind, let me start the cons by saying this chapter is setup extremely confusing for the noob.  At one point, you end up creating a door mesh and setting it up as a InteropMesh so that it is ready to be animated, only to switch to particles and spend a good portion of time working on a different piece of the level.  Yes, this is actually how I develop my levels (jumping back and forth), though it's very odd for a book to jump out of sequence. The next item might be a positive or a negative depending on your skill level with UnrealEd.  Most of the introduction to the editor layout is found in one of the Appendices instead of before Chapter 3.  For new readers, this might lead to confusion as Appendix A would typically be read between Chapter 2 and 3.  However, this is a positive for those with some experience in UnrealEd as they don't have to force themselves through a 'learn every editor button' chapter.  I'm listing this in the Cons section as the book is 'Introduction to...' and is probably going to be directed toward a lot of very beginner developers. Finally, there's a lack of general description to a lot of the underlying engine and what each piece in UnrealEd is or does.  Sometimes you'll be performing Tutorial after Tutorial with barely a paragraph in between describing ANY of what you've just done.  Tutorial 1.1 Step 6 says to press Button X, so you do.  But why?  This is in part a problem with the structure of the tutorials rather than the content of the book.  Since the tutorials are so focused on a step-by-step (or procedural) description of a process, you learn the process and not why you're doing that.  For example, you might learn how to size a material to a surface, but will only learn what buttons to press and not what each one does. This becomes extremely apparent in the chapter on Static Meshes as most of the chapter is spent in 3D Studio Max.  Since there are books on 3DSM and modelling, the book really only tells you the steps and says to go grab a book on modelling if you're really interested in 3DSM.  Again, I've learned the process to develop my own meshes in 3DSM, but I don't know the why behind the steps. Conclusion So far the book is very good though I would have a hard time recommending it to a complete beginner.  I would suggest anyone looking at this book (obviously including the other 2, more advanced volumes) to pick up a copy of UDK or Unreal 3 (available online or via download services such as Steam) and watch some online tutorials and play with it first.  You'll find plenty of online videos available that were created by the authors and may suit as a better introduction to the editor.

  Read the article

• Building the Elusive Windows Phone Panorama Control

  When the Windows Phone 7 Developer SDK was released a couple of weeks ago at MIX10 many people noticed the SDK doesnt include a template for a Panorama control.   Here at Clarity we decided to build our own Panorama control for use in some of our prototypes and I figured I would share what we came up with. There have been a couple of implementations of the Panorama control making their way through the interwebs, but I didnt think any of them really nailed the experience that is shown in the simulation videos.   One of the key design principals in the UX Guide for Windows Phone 7 is the use of motion.  The WP7 OS is fairly stripped of extraneous design elements and makes heavy use of typography and motion to give users the necessary visual cues.  Subtle animations and wide layouts help give the user a sense of fluidity and consistency across the phone experience.  When building the panorama control I was fairly meticulous in recreating the motion as shown in the videos.  The effect that is shown in the application hubs of the phone is known as a Parallax Scrolling effect.  This this pseudo-3D technique has been around in the computer graphics world for quite some time. In essence, the background images move slower than foreground images, creating an illusion of depth in 2D.  Here is an example of the traditional use: http://www.mauriciostudio.com/.  One of the animation gems I've learned while building interactive software is the follow animation.  The premise is straightforward: instead of translating content 1:1 with the interaction point, let the content catch up to the mouse or finger.  The difference is subtle, but the impact on the smoothness of the interaction is huge.  That said, it became the foundation of how I achieved the effect shown below.   Source Code Available HERE Before I briefly describe the approach I took in creating this control..and Ill add some **asterisks ** to the code below as my coding skills arent up to snuff with the rest of my colleagues.  This code is meant to be an interpretation of the WP7 panorama control and is not intended to be used in a production application.  1.  Layout the XAML The UI consists of three main components :  The background image, the Title, and the Content.  You can imagine each  these UI Elements existing on their own plane with a corresponding Translate Transform to create the Parallax effect.  2.  Storyboards + Procedural Animations = Sexy As I mentioned above, creating a fluid experience was at the top of my priorities while building this control.  To recreate the smooth scroll effect shown in the video we need to add some place holder storyboards that we can manipulate in code to simulate the inertia and snapping.  Using the easing functions built into Silverlight helps create a very pleasant interaction.    3.  Handle the Manipulation Events With Silverlight 3 we have some new touch event handlers.  The new Manipulation events makes handling the interactivity pretty straight forward.  There are two event handlers that need to be hooked up to enable the dragging and motion effects: the ManipulationDelta event :  (the most relevant code is highlighted in pink) Here we are doing some simple math with the Manipulation Deltas and setting the TO values of the animations appropriately. Modifying the storyboards dynamically in code helps to create a natural feel.something that cant easily be done with storyboards alone.   And secondly, the ManipulationCompleted event:  Here we take the Final Velocities from the Manipulation Completed Event and apply them to the Storyboards to create the snapping and scrolling effects.  Most of this code is determining what the next position of the viewport will be.  The interesting part (shown in pink) is determining the duration of the animation based on the calculated velocity of the flick gesture.  By using velocity as a variable in determining the duration of the animation we can produce a slow animation for a soft flick and a fast animation for a strong flick. Challenges to the Reader There are a couple of things I didnt have time to implement into this control.  And I would love to see other WPF/Silverlight approaches.  1.  A good mechanism for deciphering when the user is manipulating the content within the panorama control and the panorama itself.   In other words, being able to accurately determine what is a flick and what is click. 2.  Dynamically Sizing the panorama control based on the width of its content.  Right now each control panel is 400px, ideally the Panel items would be measured and then panorama control would update its size accordingly.  3.  Background and content wrapping.  The WP7 UX guidelines specify that the content and background should wrap at the end of the list.  In my code I restrict the drag at the ends of the list (like the iPhone).  It would be interesting to see how this would effect the scroll experience.     Well, Its been fun building this control and if you use it Id love to know what you think.  You can download the Source HERE or from the Expression Gallery  Erik Klimczak  | [email protected] | twitter.com/eklimczDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Another sound not working post

  - by Thomas Smart

  Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

  Read the article

• Ubuntu 12.04 doesn't recgonize m CPU correctly

  - by Nightshaxx

  My computer is running ubuntu 12.04 (64bit), and I have a AMD Athlon(tm) X4 760K Quad Core Processor which is about 3.8ghz (and an Radeon HD 7770 GPU). Yet, when I type in cat /proc/cpuinfo - I get: processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 16 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 1 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 17 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 2 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 18 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 3 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 2 apicid : 19 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro The important part of all this being, cpu MHz : 1800.000 which indicates that I have only 1.8ghz of processing power, which is totally wrong. Is it something with drivers or Ubuntu?? Also, will windows recognize all of my processing power? Thanks! (NOTE: My cpu doesn't have intigrated graphics

  Read the article

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• #MIX Day 2 Keynote: Put the Phone Down and Listen

  - by andrewbrust

  MIX day 1’s keynote was all about Windows Phone 7 (WP7).  MIX day 2’s was a reminder that Microsoft has much more going on than a new mobile platform.  Steven Sinofsky, Scott Guthrie, Doug Purdy and others showed us lots of other good things coming from Microsoft, mostly in the developer stack, that we certainly shouldn’t overlook.  These included the forthcoming IE9, its new JavaScript compiling engine and support for HTML 5 that takes full advantage of the local PC resources, including the Graphics Processing Unit.  The announcements also included important additions to ASP.NET (and one subtraction, in the form of lighter-weight ViewState technology) including almost-obsessive jQuery support.  That support is so good that John Resig, creator of the jQuery project, came on stage to tell us so.  Then Scott Guthrie told us that Microsoft would be contributing code to Open Source jQuery project. This is not your father’s Microsoft, it would seem. But to me, the crown jewel in today’s keynote were the numerous announcements around the Open Data Protocol (OData).  OData is nothing more than the protocol side of “Astoria” (now known as WCF Data Services, and until recently called ADO.NET Data Services) separated out and opened up as a platform-neutral standard.  The 2009 Professional Developers Conference (PDC) was Microsoft’s vehicle for first announcing OData, as well as project “Dallas,” an Azure-based cloud platform for publishing commercial OData feeds.  And we had already known about “bridges” for Astoria (and thus OData) for PHP and Java.  We also knew that PowerPivot, Microsoft’s forthcoming self-service BI plug-in for Excel 2010, will consume OData feeds and then facilitate drill-down analysis of their data.  And we recently found out that SQL Reporting Services reports (in the forthcoming SQL Server 2008 R2) and SharePoint 2010 lists will be consumable in OData format as well. So what was left to announce?  How about OData clients for Palm webOS and Apple iPhone/Objective C?  How about the release to Open Source of .NET’s OData client?  Or the ability to publish any SQL Azure database as an OData service by simply checking a checkbox at deployment?  Maybe even a Silverlight tool (code-named “Houston”) to create SQL Azure databases (and then publish them as OData) right in the browser?  And what if you you could get at NetFlix’s entire catalog in OData format?  You can – just go to http://odata.netflix.com/Catalog/ and see for yourself.  Douglas Purdy, who made these announcements said “we want OData to work on as many devices and platforms as possible.”  After all the cross-platform OData announcements made in about a half year’s time, it’s hard to dispute this. When Microsoft plays the data card, and plays it well, watch out, because data programmability is the company’s heritage.  I’ll be discussing OData at length in my April Redmond Review column.  I wrote that column two weeks ago, and was convinced then that OData was a big deal. Today upped the ante even more.  And following the Windows Phone 7 euphoria of yesterday was, I think, smart timing.  The phone, if it’s successful, will be because it’s a good developer platform play.  And developer platforms (as well as their creators) are most successful when they have a good data strategy.  OData is very Silverlight-friendly, and that means it’s WP7-friendly too.  Phone plus service-oriented data is a one-two punch.  A phone platform without data would have been a phone with no signal.

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Plymouth and GRUB do not show at all

  - by WarriorIng64

  I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

  Read the article

• Review of ComponentOne Silverlight Controls (Free License Giveaway).

  - by mbcrump

  ComponentOne has several great products that target Silverlight Developers. One of them is their Silverlight Controls and the other is the XAP Optimizer. I decided that I would check out the controls and Xap Optimizer and feature them on my blog. After talking with ComponentOne, they agreed to take part in my Monthly Silverlight giveaway. The details are listed below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of ComponentOne Silverlight Controls + XAP Optimizer! (the winner also gets a license to Silverlight Spy) Random winner will be announced on March 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump and @ComponentOne http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit ComponentOne because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Live Demos of the Silverlight Controls is located here. The XAP Optimizer page is here. One thing that I liked about the help documentation is that you can grab a PDF that only contains documentation for that control. This allows you to get the information you need without going through several hundred pages. You can also download the full documentation from their site.  ComponentOne Silverlight Controls I recently built a hobby project and decided to use ComponentOne Silverlight Controls. The main reason for this is that the controls are heavily documented, they look great and getting help was just a tweet or forum click away. So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. 1) ComponentOne’s Image Control – Display animated GIF images on your Silverlight pages as you would in traditional Web apps. Add attractive visuals with minimal effort. 2) HTML Host - Render HTML and arbitrary URI content from within Silverlight. 3) Chart3D - Create 3D surface charts with options for contour levels, zones, a chart legend and more. 4) PDFViewer - View PDF files in Silverlight! That is just a fraction of the controls available. If you want to check out several of them in a “real” application then check out my Silverlight page at http://michaelcrump.info. This brings me to the second part of the giveaway. XAP Optimizer – Is designed to reduce the size of your XAP File. It also includes built-in obfuscation and signing. With my personal project, I decided to use the XAP Optimizer by ComponentOne. It was so easy to use. You basically give it your .XAP file and it provides an output file. If you prefer to prune unused references manually then you can prune your XAP file manually by selecting the option below. I went ahead and added Obfuscation just to try it out and it worked great. You may notice from the screenshot below that I only obfuscated assemblies that I built. The other dlls anyone can grab off the net so we have no reason to obfuscate them. You also have the option to automatically sign your .xap with the SN.exe tool. So how did it turn out? Well, I reduced my XAP size from 2.4 to 1.8 with simply a click of a button. I added obfuscation with a click of a button: Screenshot of no obfuscation on my XAP File   Screenshot of obfuscation on my XAP File with XAP Optimizer.   So, with 2 button clicks, I reduce my XAP file and obfuscated my assembly. What else can you want? Well, they provide a nice HTML report that gives you an optimization summary. So what if you don’t want to launch this tool every time you deploy a Silverlight application? Well the official documentation provided a way to do it in your built event in Visual Studio. Click the Build Events tab on the left side of the Properties window. Enter the following command in the Post-build event command line: $Program Files\ComponentOne\XapOptimizer\XapOptimizer.exe /cmd /p:$(ProjectDir)$(ProjectName).xoproj In the end, this is a great product. I love code that I don’t have to write and utilities that just work. ComponentOne delivers with both the Silverlight Controls and the XAP Optimizer. Don’t forget to leave a comment below in order to win a set of the controls! Subscribe to my feed

  Read the article

• How can I back up my ubuntu system?

  - by Eloff

  I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >