Search Results

Search found 9765 results on 391 pages for 'skill building'.

Page 294/391 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• Bare-metal virtualisation for the desktop

  - by Andrew Taylor

  Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

  Read the article

• How can I split 200Mbps of streaming traffic into routers?

  - by Jared

  As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

  Read the article

• Backup hardware and strategy on distributed Windows Server 2008 network

  - by CesarGon

  This question is a follow up to this. We have a Windows Server 2008 R2 domain over a network that spans two different buildings, linked by a 100-Mbps point-to-point line. Over 60 users work in the organisation. We are planning to use DFS folders and DFS replication for file serving across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. The idea is to set up a DFS file server in each building and use DFS so that all the contents stay replicated over the 100-Mbps link. We are now considering backup hardware and strategies. We are Dell customers and, after browsing the online Dell catalogue, I can see a number of backup hardware options. My main doubts are the following: Would you go for a tape library, disk backup, or are there other options worth considering? Would you perform batch backups (i.e. nightly) or would you use continuous backup (i.e. while users are working)? Would you use a dedicated backup server to which the tape library (or any other backup device) is attached, or is there any other alternative way of doing things? My experience with backup hardware and overall setup is limited, so I appreciate any good piece of advice that you may have. Thanks.

  Read the article

• Limit the amount of data that can be stored in a folder on Ubuntu Server 12.04?

  - by dougoftheabaci

  I'm in the process of building my first server. It's up, it's running, I'm transferring copious amounts of data away from my horrid little Drobo (DO NOT BUY ONE OF THESE, EVER). However, there's one thing I have yet to do: I'd like to set it up for Time Machine backups as well. I've seen all the guides and I have some idea of how to set the whole thing up, but the issue is that Time Machine will just fill up as much space as you let it. So if I let it lose in my 8 TB zpool it'll slowly consume every last available sector. This, of course, is not acceptable. I have a folder at the root of my zpool called "ZFS Time Machine" and I would like to limit it to 1 TB (all I need for backup purposes). However, I have no idea how to do that. Is this possible? I can continue using a small external hard drive attached via FW800 if I have to but I'd much rather prefer putting everything on my server.

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• Geographically distributed file system with preferred locality

  - by dpb

  Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

  Read the article

• Haproxy not properly passing on X-Forwarded-For header

  - by JesseP

  I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

  Read the article

• Built local glibc, broke system, how do I ssh without parsing the .bashrc?

  - by Mikhail

  The cluster I am on had really old build tools and I needed to use CUDA5. I'm a pretty clever dude and I planned on building the necissary tools. So, I built a local copy of gcc, bintools, and glibc. Everything a CUDA5 could want. All builds finished without error. and I tested gcc and bintools. Everything was wonderful and I built and ran a few of the programs. I set up the LD_LIBRARY_PATHs in the .bashrc and logged back in, expecting a productive night ahead. To my horror I realized that everything is dynamically linked. Now I can't do simple commands like ls [ex@uid377 ~]$ ls ls: error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument and I can't do commands to fix the problem like rm or vim! Is there a way for me to ssh but also to ignore .bashrc file? Any suggestions are much appreciated. This machine is obviously under maintained and I don't know when I could have administrator support.

  Read the article

• DEB: "Provides:" field ignored

  - by Creshal

  I need to replace a package with a custom one, which gets its own name (foo-origpackage). To allow it to be used as drop-in replacement, I added the Provides: origpackage line to the control file. apt-cache show foo-origpackage lists the "Provides" entry just fine. However, when I want to install a file depending on origpackage, it fails ("Package origpackage not installed"). Is there some distinction between "real" and virtual packages I'm missing? EDIT: To be precise, what I want to replace is xen-utils-common for Squeeze. My tao-xen-utils-common has the following control file: Source: tao-xen-utils-common Section: kernel Priority: optional Maintainer: Creshal <[email protected]> Build-Depends: debhelper Standards-Version: 3.8.0 Homepage: http://tao.at Package: tao-xen-utils-common Architecture: all Depends: gawk, lsb-base, udev, xenstore-utils, tao-firewall Provides: xen-utils-common Conflicts: xen-utils-common Replaces: xen-utils-common Description: Xen administrative tools - common files (modified) The userspace tools to manage a system virtualized through the Xen virtual machine monitor. Modified for use with TAO Firewall. Installing xen-utils-4.0 fails, however: foo@bar# apt-cache showpkg tao-xen-utils-common Package: tao-xen-utils-common Versions: 4.0.0-1tao1 (/var/lib/apt/lists/repo.tao.at_dists_stable_main_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/repo.tao.at_dists_stable_main_binary-amd64_Packages MD5: 7c2503f563fca13b33b4eb3cbcb3c129 Reverse Depends: tao-firewall,tao-xen-utils-common tao-firewall,tao-xen-utils-common Dependencies: 4.0.0-1tao1 - gawk (0 (null)) lsb-base (0 (null)) udev (0 (null)) xenstore-utils (0 (null)) tao-firewall (0 (null)) xen-utils-common (0 (null)) xen-utils-common (0 (null)) Provides: 4.0.0-1tao1 - xen-utils-common Reverse Provides: foo@bar# apt-get install xen-utils-4.0 Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xen-utils-common Suggested packages: xen-docs-4.0 The following packages will be REMOVED: tao-xen-utils-common The following NEW packages will be installed: xen-utils-4.0 xen-utils-common Edit:foo@bar# apt-cache policy xen-utils-4.0 xen-utils-4.0: Installed: (none) Candidate: 4.0.1-4 Version table: 4.0.1-4 0 500 http://ftp.at.debian.org/debian/ stable/main amd64 Packages 4.0.1-4 0 500 http://security.debian.org/ stable/updates/main amd64 Packages

  Read the article

• Backup software for incremental swapped-out drives?

  - by user13743

  We're using Acronis Home 11 to backup our main Windows machine at the office. We have a set of portable hard drives that we swap out each week, for redundancy. We have incremental sets ( a new diff of the entire series each night) building on each drive. However, from time to time, Acronis gets confused and sometimes makes a new full backup. This eats up a lot of drive on the disks. Also, I have to trick the Acronis script each time I swap out a drive and point it to the new incremental backup set. Finally, if a drive gets full, there's no way to partition the backup set on a drive. I found this out the hard way, and now one drive is full with one backup set. So now on the other drive, I have three folders of backup sets. When one starts to get full, I delete the oldest one and start a new set. That way one single drive never gets filled up with one single backup set. I'm looking for a backup software that can backup Windows in incremental sets, and doesn't get tripped up with swapped out drives. Is there a better solution?

  Read the article

• Macs don't connect to wifi access point but PCs will

  - by Josh

  So, as a side project I'm going to try and figure out why the wifi APs in my building exhibit the following behavior: - They typically allow all types of computers to connect without issues - Sometimes Apples can't get an IP address but will still connect to the AP's signal - Less often, PCs can't connect to the wifi (same as above - yes signal, no IP addy) - Don't let Raiders fans on no matter the time of day! My first thought was that the DHCP leases were all taken up when the Apples would try to connect, and it was just their unlucky timing, but I would then try to log on with a PC that had a new, unleased MAC address and it would work... Could this be something to do with interoperability between an apple wifi card, and the APs? Different parts of the DHCP lease being taken up first? The fact that the Seattle Mariners might actually be good this year?? If this hasn't used up everyone's patience (with my crappy sports jokes), something else I could use some help with: - We don't have the model or type of AP - This is because there is no documentation available for them, and they literally look like small white boxes with no writing on them. Also, the company that installed them is out of business, so the situation might be that no docs will ever be on the way. -- Do you guys have any ideas on how to figure out what we have? Thanks as always for all the help, and I'm looking forward to the day when I know enough to start contributing back to the site, Josh

  Read the article

• Can I get ethernet out of my Verizon FIOS set-top box?

  - by Tom Hughes

  Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

  Read the article

• Dynamic fowarding with SOCKS5 proxy [on hold]

  - by bh3244

  I'm building my own SOCKS5 client and HTTP library and am having trouble figuring out how things work with dynamic port forwarding. So far I can connect successfully with my SOCKS5 client, but from there on I am stuck. I am using the ssh -D command. Considering I have my local machine "home" and my server "server" and I wanted to use "server" as proxy for all connections I understand I would type ssh -D "localport" "serverhostname" on my local machine "home". This command I understand has ssh accept connections with the SOCKS5 protocol. So now if I want to connect to google.com(74.125.224.72:80) and issue a GET for the front page, I assume I would send the SOCKS5 client request and the server would respond back with a 0x00 "succeeded" and from then on I am connected and I would send the HTTP GET request and the server would respond back accordingly with the data. Now if I want to navigate to a different website, must I issue another SOCKS5 connection request for that sites IP/hostname? I'm confused if this is the way it is done, or if there is a program listening on the local port of the "server" and handling outgoing and incoming data. To reiterate: Do SOCKS5 proxies work by sending repeated SOCKS5 connection requests for different addresses or is there just one connection to a local port on "server" and another program on "server" handles the outgoing connection to the internet by using that local port to send and receive data to/from "home"?

  Read the article

• DPM 2007 clashing with existing SQL backup job

  - by Paul D'Ambra

  I've recently installed a DPM2007 server on Server 2003 and have set up a protection group against a server 2003 server running SQL 2005 SP3. The SQL server in question has a full backup (as a sql agent job) once a day and transaction log backups hourly. These are zipped up and FTP'd to a server offsite by a scheduled task. Since adding the DPM job I'm receiving many error messages: DPM tried to do a SQL log backup, either as part of a backup job or a recovery to latest point in time job. The SQL log backup job has detected a discontinuity in the SQL log chain for database SERVER_NAME\DB_Name since the last backup. All incremental backup jobs will fail until an express full backup runs. My google-fu suggests that I need to change the full backup my sqlagent job is running to a copy_only job. But I think this means that I can't use that backup with the transaction_logs to restore the database if the building (including the DPM server) burns down. I'm sure I'm missing something obvious and thought I'd see what the hivemind suggests. It is an option to set-up a co-located DPM server elsewhere and have DPM stream the backup but that's obviously more expensive than the current set up. Many thanks in advance

  Read the article

• Is encryption really needed for having network security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

  Read the article

• Azure's Ubuntu 12.0.4 fails to install PHP5

  - by Alex Kennberg

  Similar to this article from Azure themselves: http://www.windowsazure.com/en-us/manage/linux/common-tasks/install-lamp-stack/ I am trying to install PHP5 on Ubuntu 12.0.4 virtual machine. However, it fails installing the ssl-cert. $ sudo apt-get install php5 Reading package lists... Done Building dependency tree Reading state information... Done php5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 49 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up ssl-cert (1.0.28) ... Could not create certificate. Openssl output was: Generating a 2048 bit RSA private key ............................+++ ...................................................................................................................+++ writing new private key to '/etc/ssl/private/ssl-cert-snakeoil.key' ----- problems making Certificate Request 140320238503584:error:0D07A097:asn1 encoding routines:ASN1_mbstring_ncopy:string too long:a_mbstr.c:154:maxsize=64 dpkg: error processing ssl-cert (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ssl-cert E: Sub-process /usr/bin/dpkg returned an error code (1) Any tips appreciated.

  Read the article

• Issues installing apache debian

  - by Belgin Fish

  I'm having issues installing apache2, and pretty much everything in general, I'm using debian. I run sudo apt-get install apache2 and then it returns root@debian:~# apt-get install apache2 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: apache2 : Depends: apache2-mpm-worker (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-prefork (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-event (= 2.2.16-6+squeeze7) but it is not going to be installed or apache2-mpm-itk (= 2.2.16-6+squeeze7) but it is not going to be installed Depends: apache2.2-common (= 2.2.16-6+squeeze7) but it is not going to be installed E: Broken packages Not really sure what's up :S Seems like it can't find any of the required packages for anything, Anyone know what I'm doing wrong?

  Read the article

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ >> It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Creating a tar file with checksums included

  - by wazoox

  Here's my problem : I need to archive to tar files a lot ( up to 60 TB) of big files (usually 30 to 40 GB each). I would like to make checksums ( md5, sha1, whatever) of these files before archiving; however not reading every file twice (once for checksumming, twice for tar'ing) is more or less a necessity to achieve a very high archiving performance (LTO-4 wants 120 MB/s sustained, and the backup window is limited). So I'd need some way to read a file, feeding a checksumming tool on one side, and building a tar to tape on the other side, something along : tar cf - files | tee tarfile.tar | md5sum - Except that I don't want the checksum of the whole archive (this sample shell code does just this) but a checksum for each individual file in the archive. I've studied GNU tar, Pax, Star options. I've looked at the source from Archive::Tar. I see no obvious way to achieve this. It looks like I'll have to hand-build something in C or similar to achieve what I need. Perl/Python/etc simply won't cut it performance-wise, and the various tar programs miss the necessary "plugin architecture". Does anyone know of any existing solution to this before I start code-churning ?

  Read the article

• Issue with SSL using HAProxy and Nginx

  - by Ben Chiappetta

  I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

  Read the article

• Distributed File Systems.

  - by GruffTech

  So, I've been reading several articles around ServerFault as well as google. (For Example, this link) My Requirements are very similar to the link above, however i'd like to also have dynamic or at least resizeable file volumes, so if necessary i can add 4-5 servers to the pool, and then expand the volume. Any Distributed File systems that support that, to save me some time? Thanks! LustreFS will be my next test cluster to build. GlusterFS I've build a 3-machine test GlusterFS cluster, However i quickly became aware of several of its limitations that it doesn't seem to make clearly public. One, i can't seem to resize a volume. Once a volume is created, its done. Which seems retarded, why have a fully scalable file system if i can't scale a volume? So maybe i'm doing something wrong. I'm not sure. AmazonS3 while gives the cheapest startup adds too much cost when broken down to per client per month, so its out. Building my own system when prorated over several years with no bandwidth costs makes it significantly cheaper. MogileFS isn't an option as we'd like this server to be a SAN-Replacement, for storing tons of media from a multitude of systems, which for us means it needs to be POSIX compliant so it can be remotely mounted via NFS or CIFS.

  Read the article

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• Campus VLAN Segmentation - By OS?

  - by Moduspwnens

  We've been thinking through re-arranging our network and VLAN configuration. Here's the situation. We already have our servers, VoIP phones, and printers on their own VLANs, but our problem lies with end user devices. There are just too many to lump on the same VLAN without being hammered with broadcasts! Our current segmentation strategy has them split into VLANs like this: Student iPads Staff iPads Student Macbooks Staff Macbooks Gaming devices Staff (Other) Student (Other) *Note that our network has many more iPads and MacBooks than most. Since the primary reason we're splitting them is just to put them in smaller groups, this has been working for us (for the most part). However, this required our staff to maintain access control lists (MAC addresses) of all devices belonging in these groups. It also has the unfortunate side effect of illogically grouping broadcast traffic. For example, using this setup, students on opposite ends of campus using iPads will share broadcasts, but two devices belonging to the same user (in the same room) will likely be on completely separate VLANs. I feel like there must be a better way of doing this. I've done a lot of research and I'm having trouble finding instances of this kind of segmentation being recommended. The feedback on the most relevant SO question seems to point toward VLAN segmentation by building/physical location. I feel like that makes sense because logically, at least among miscellaneous end users, broadcasts will typically be intended for nearby devices. Are there other campuses/large-scale networks out there segmenting VLANs based on end-system OS? Is this a typical configuration? Would VLAN segmentation based on physical location (or some other criteria) be more effective? EDIT: I've been told that we will soon be able to dynamically determine device OS without maintaining access lists, although I'm not sure how much that affects the answers to the questions.

  Read the article

• Cannot install mercurial properly - PYTHONPATH error

  - by evident

  Hi, I have a server running on Ubuntu 10.04 on which I wanted to install Mercurial via % sudo apt-get install mercurial It seems to have installed successfully and doesn't show me any error messages. But when I try it I get: % hg abort: couldn't find mercurial libraries in [/usr/bin /usr/lib/python2.6 /usr/lib/python2.6/plat-linux2 /usr/lib/python2.6/lib-tk /usr/lib/python2.6/lib-old /usr/lib/python2.6/lib-dynload /usr/lib/python2.6/dist-packages /usr/lib/pymodules/python2.6 /usr/local/lib/python2.6/dist-packages] (check your install and PYTHONPATH) I've googled for a while now and found some sites with the same problem but I still have no idea on how to fix it since it nowhere really says what I need to look for or what I need to add to my PYTHONPATH... By the way, right now my PYTHONPATH seems to be empty: % echo $PYTHONPATH % This is what I get if I look into my /usr/lib/ directory for mercurial: % find /usr/lib/py* -name 'mercurial*' /usr/lib/pymodules/python2.6/mercurial /usr/lib/pymodules/python2.6/mercurial-1.4.3.egg-info /usr/lib/pyshared/python2.6/mercurial Can anybody please help me with that? What (and how) should I set my PYTHONPATH to? I already tried reinstalling, installing with "easy_install mercurial" or with "aptitude reinstall mercurial" but nothing helped. I always get this same error. Would be great if anyone could help... thanks! ADDITION: Building from scratch didn't work out well... when I am logged in as root I can use hg, but when I access with my normal user I get: % hg Traceback (most recent call last): File "/usr/local/bin/hg", line 4, in <module> import pkg_resources File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 2659, in <module> parse_requirements(__requires__), Environment() File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 546, in resolve raise DistributionNotFound(req) pkg_resources.DistributionNotFound: mercurial==1.7.2

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >