Search Results

Search found 7671 results on 307 pages for 'slow browsing'.

Page 298/307 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• php5.4 + freebsd8.3+nginx can't get errors

  - by Alexey Perepechko

  I have a confusing behaviour. I can't get any error into log file or screen. I made a file index.php with content like this: "<?php a();".Normally, I will get message like this: "Call to undefined function a()" but when I called this script on my configuration I got nothing. Only white screen and empty logs. I checked all rights. I turned on all possible log file. Nothing. Please help me. My configuration is: freebsd 8.3-RELEASE PHP 5.4.7 (fpm-fcgi) nginx version: nginx/1.2.4 FPM-config [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice emergency_restart_threshold = 5 emergency_restart_interval = 2 process_control_timeout = 2 daemonize = yes events.mechanism = kqueue [puser] listen = /usr/local/www/host/tmp/php-fpm.sock; listen.backlog = -1 listen.allowed_clients = 127.0.0.1 listen.owner = puser listen.group = puser listen.mode = 0666 user = puser group = puser pm = dynamic pm.max_children = 30 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 50 slowlog = /usr/local/www/host/logs/fpm.log.slow request_slowlog_timeout = 1s rlimit_files = 1024 rlimit_core = 0 chroot = /usr/local/www/host/ catch_workers_output = yes env[HOSTNAME] = $HOSTNAME env[TMP] = /tmp env[TMPDIR] = /tmp env[TEMP] = /tmp php_admin_value[upload_tmp_dir] = /tmp php_admin_value[cgi.fix_pathinfo] = 0 php_admin_value[date.timezone]= 'Europe/Moscow' php_admin_value[memory_limit] = 320m php_admin_value[max_execution_time] = 180 php_admin_flag[log_errors] = on php_admin_value[error_log] = /logs/fpm-err.log php_admin_value[error_reporting] = 'E_ALL & ~E_NOTICE' php_admin_value[display_errors] = on php_admin_flag[display_startup_errors] = on NGINX config user www; worker_processes 2; worker_rlimit_nofile 80000; error_log /var/log/nginx_error.log notice; #pid logs/nginx.pid; events { worker_connections 2048; use kqueue; } http { server_tokens off; client_max_body_size 4m; include mime.types; default_type application/octet-stream; charset utf-8; sendfile on; keepalive_timeout 65; tcp_nopush on; tcp_nodelay on; log_format IP .$remote_addr.; log_format main '$remote_addr - $remote_user [$time_local] $request $request_body ' '"$status" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; reset_timedout_connection on; server { listen 80; server_name www.example.com; access_log /usr/local/www/host/logs/access.log main; error_log /usr/local/www/host/logs/error.log error; error_page 500 502 503 504 /errors/50x.html; error_page 404 /errors/404.html; root /usr/local/www/host/htdocs; index index.php index.html index.htm; location / { index index.html index.php; try_files $uri /index.php?$args; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_intercept_errors on; fastcgi_pass unix:/usr/local/www/host/tmp/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /htdocs$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED /htdocs$fastcgi_script_name; include /usr/local/etc/nginx/fastcgi_params; } } } PHP config (php.ini) [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = dl,system,exec,passthru,shell_exec disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = On error_log = /var/log/php-fpm-error.log variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] date.timezone = Europe/Moscow [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba] I need to get errors on display and detailed record in the error.log.

  Read the article

• Minimum-Waste Print Job Grouping Algorithm?

  - by Matt Mc

  I work at a publishing house and I am setting up one of our presses for "ganging", in other words, printing multiple jobs simultaneously. Given that different print jobs can have different quantities, and anywhere from 1 to 20 jobs might need to be considered at a time, the problem would be to determine which jobs to group together to minimize waste (waste coming from over-printing on smaller-quantity jobs in a given set, that is). Given the following stable data: All jobs are equal in terms of spatial size--placement on paper doesn't come into consideration. There are three "lanes", meaning that three jobs can be printed simultaneously. Ideally, each lane has one job. Part of the problem is minimizing how many lanes each job is run on. If necessary, one job could be run on two lanes, with a second job on the third lane. The "grouping" waste from a given set of jobs (let's say the quantities of them are x, y and z) would be the highest number minus the two lower numbers. So if x is the higher number, the grouping waste would be (x - y) + (x - z). Otherwise stated, waste is produced by printing job Y and Z (in excess of their quantities) up to the quantity of X. The grouping waste would be a qualifier for the given set, meaning it could not exceed a certain quantity or the job would simply be printed alone. So the question is stated: how to determine which sets of jobs are grouped together, out of any given number of jobs, based on the qualifiers of 1) Three similar quantities OR 2) Two quantities where one is approximately double the other, AND with the aim of minimal total grouping waste across the various sets. (Edit) Quantity Information: Typical job quantities can be from 150 to 350 on foreign languages, or 500 to 1000 on English print runs. This data can be used to set up some scenarios for an algorithm. For example, let's say you had 5 jobs: 1000, 500, 500, 450, 250 By looking at it, I can see a couple of answers. Obviously (1000/500/500) is not efficient as you'll have a grouping waste of 1000. (500/500/450) is better as you'll have a waste of 50, but then you run (1000) and (250) alone. But you could also run (1000/500) with 1000 on two lanes, (500/250) with 500 on two lanes and then (450) alone. In terms of trade-offs for lane minimization vs. wastage, we could say that any grouping waste over 200 is excessive. (End Edit) ...Needless to say, quite a problem. (For me.) I am a moderately skilled programmer but I do not have much familiarity with algorithms and I am not fully studied in the mathematics of the area. I'm I/P writing a sort of brute-force program that simply tries all options, neglecting any option tree that seems to have excessive grouping waste. However, I can't help but hope there's an easier and more efficient method. I've looked at various websites trying to find out more about algorithms in general and have been slogging my way through the symbology, but it's slow going. Unfortunately, Wikipedia's articles on the subject are very cross-dependent and it's difficult to find an "in". The only thing I've been able to really find would seem to be a definition of the rough type of algorithm I need: "Exclusive Distance Clustering", one-dimensionally speaking. I did look at what seems to be the popularly referred-to algorithm on this site, the Bin Packing one, but I was unable to see exactly how it would work with my problem. Any help is appreciated. :)

  Read the article

• CustomListAdapter Problem in Android? Getting ClassCast Exception? How???

  - by Praveen Chandrasekaran

  i want to improve the list view's performance. this is the code for my getView method in my Adapter? public View getView(int arg0, View text_view_name, ViewGroup parent) { try { if (text_view_name == null) { text_view_name = mInflater.inflate( R.layout.bs_content_list_item1, null); text_view_name.setTag(R.id.text1_detail1, text_view_name .findViewById(R.id.text1_detail1)); text_view_name.setTag(R.id.text3_detail1, text_view_name .findViewById(R.id.text3_detail1)); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } text1 = (TextView) text_view_name.getTag(R.id.text1_detail1); // text2 = (TextView) text_view_name.getTag(R.id.text2); text3 = (TextView) text_view_name.getTag(R.id.text3_detail1); img = (ImageView) text_view_name.getTag(R.id.eve_img_detail1); text1.setText(VAL1[arg0]); text3.setText(VAL3[arg0]); if (!mBusy) { img_value = new URL(VAL4[arg0]); mIcon11 = BitmapFactory.decodeStream(img_value.openConnection() .getInputStream()); img.setImageBitmap(mIcon11); text_view_name.setTag(R.id.eve_img_detail1, null); } else { img.setImageResource(R.drawable.icon); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } } catch (Exception e) { name = "Exception in MultiLine_bar_details1 getView"; Log.v(TAG, name + e); } return text_view_name; } this is the code for scrollstatechanged method: public void onScrollStateChanged(AbsListView view, int scrollState) { switch (scrollState) { case OnScrollListener.SCROLL_STATE_IDLE: try { MultiLine_bar_details1.mBusy = false; int first = view.getFirstVisiblePosition(); int count = view.getCount(); for (int i = 0; i < count; i++) { ImageView t = (ImageView) view.getChildAt(i);// here getting the ClassCastException if (t.getTag(R.id.eve_img_detail1) != null) { MultiLine_bar_details1.img_value = new URL( MultiLine_bar_details1.VAL4[first + i]); MultiLine_bar_details1.mIcon11 = BitmapFactory .decodeStream(MultiLine_bar_details1.img_value .openConnection().getInputStream()); MultiLine_bar_details1.img.setImageBitmap(MultiLine_bar_details1.mIcon11); t.setTag(R.id.eve_img_detail1, null); } } } catch (Exception e) { Log.v(TAG, "Idle" + e); } // mStatus.setText("Idle"); break; case OnScrollListener.SCROLL_STATE_TOUCH_SCROLL: MultiLine_bar_details1.mBusy = true; break; case OnScrollListener.SCROLL_STATE_FLING: MultiLine_bar_details1.mBusy = true; break; } } getting the Exception in Idle state: 05-03 16:47:15.201: VERBOSE/BS_Bars(258): Idlejava.lang.ClassCastException: android.widget.LinearLayout this is very complicated for me to get the output properly. actually i have the listview with custom adapter. that icons makes the listview scroll very slow.i am getting the images for icons from the image urls. upto this(above code) i can improve the scroll performance of my list view. but the image icons are not proper in the corresponding order. its dynamically changing when i scroll the listview.. i refered the commonsware busy coder guide and this blog. My very Big question is "How can we access the single view in scrollstatechanged parameter AbsListView? " what is the problem in it? how to do it better? Any Idea?

  Read the article

• CustomListAdapter Problem in Android? How???

  - by Praveen Chandrasekaran

  i want to improve the list view's performance. this is the code for my getView method in my Adapter? public View getView(int arg0, View text_view_name, ViewGroup parent) { try { if (text_view_name == null) { text_view_name = mInflater.inflate( R.layout.bs_content_list_item1, null); text_view_name.setTag(R.id.text1_detail1, text_view_name .findViewById(R.id.text1_detail1)); text_view_name.setTag(R.id.text3_detail1, text_view_name .findViewById(R.id.text3_detail1)); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } text1 = (TextView) text_view_name.getTag(R.id.text1_detail1); // text2 = (TextView) text_view_name.getTag(R.id.text2); text3 = (TextView) text_view_name.getTag(R.id.text3_detail1); img = (ImageView) text_view_name.getTag(R.id.eve_img_detail1); text1.setText(VAL1[arg0]); text3.setText(VAL3[arg0]); if (!mBusy) { img_value = new URL(VAL4[arg0]); mIcon11 = BitmapFactory.decodeStream(img_value.openConnection() .getInputStream()); img.setImageBitmap(mIcon11); text_view_name.setTag(R.id.eve_img_detail1, null); } else { img.setImageResource(R.drawable.icon); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } } catch (Exception e) { name = "Exception in MultiLine_bar_details1 getView"; Log.v(TAG, name + e); } return text_view_name; } this is the code for scrollstatechanged method: public void onScrollStateChanged(AbsListView view, int scrollState) { switch (scrollState) { case OnScrollListener.SCROLL_STATE_IDLE: try { MultiLine_bar_details1.mBusy = false; int first = view.getFirstVisiblePosition(); int count = view.getCount(); for (int i = 0; i < count; i++) { ImageView t = (ImageView) view.getChildAt(i); if (t.getTag(R.id.eve_img_detail1) != null) { MultiLine_bar_details1.img_value = new URL( MultiLine_bar_details1.VAL4[first + i]); MultiLine_bar_details1.mIcon11 = BitmapFactory .decodeStream(MultiLine_bar_details1.img_value .openConnection().getInputStream()); MultiLine_bar_details1.img.setImageBitmap(MultiLine_bar_details1.mIcon11); t.setTag(R.id.eve_img_detail1, null); } } } catch (Exception e) { Log.v(TAG, "Idle" + e); } // mStatus.setText("Idle"); break; case OnScrollListener.SCROLL_STATE_TOUCH_SCROLL: MultiLine_bar_details1.mBusy = true; break; case OnScrollListener.SCROLL_STATE_FLING: MultiLine_bar_details1.mBusy = true; break; } } this is very complicated for me to get the output properly. actually i have the listview with custom adapter. that icons makes the listview scroll very slow.i am getting the images for icons from the image urls. upto this(above code) i can improve the scroll performance of my list view. but the image icons are not proper in the corresponding order. its dynamically changing when i scroll the listview.. i refered the commonsware busy coder guide and this blog. My very Big question is "How can we access the single view in scrollstatechanged parameter AbsListView? " what is the problem in it? how to do it better? Any Idea?

  Read the article

• Issue with SPI (Serial Port Comm), stuck on ioctl()

  - by stef

  I'm trying to access a SPI sensor using the SPIDEV driver but my code gets stuck on IOCTL. I'm running embedded Linux on the SAM9X5EK (mounting AT91SAM9G25). The device is connected to SPI0. I enabled CONFIG_SPI_SPIDEV and CONFIG_SPI_ATMEL in menuconfig and added the proper code to the BSP file: static struct spi_board_info spidev_board_info[] { { .modalias = "spidev", .max_speed_hz = 1000000, .bus_num = 0, .chips_select = 0, .mode = SPI_MODE_3, }, ... }; spi_register_board_info(spidev_board_info, ARRAY_SIZE(spidev_board_info)); 1MHz is the maximum accepted by the sensor, I tried 500kHz but I get an error during Linux boot (too slow apparently). .bus_num and .chips_select should correct (I also tried all other combinations). SPI_MODE_3 I checked the datasheet for it. I get no error while booting and devices appear correctly as /dev/spidevX.X. I manage to open the file and obtain a valid file descriptor. I'm now trying to access the device with the following code (inspired by examples I found online). #define MY_SPIDEV_DELAY_USECS 100 // #define MY_SPIDEV_SPEED_HZ 1000000 #define MY_SPIDEV_BITS_PER_WORD 8 int spidevReadRegister(int fd, unsigned int num_out_bytes, unsigned char *out_buffer, unsigned int num_in_bytes, unsigned char *in_buffer) { struct spi_ioc_transfer mesg[2] = { {0}, }; uint8_t num_tr = 0; int ret; // Write data mesg[0].tx_buf = (unsigned long)out_buffer; mesg[0].rx_buf = (unsigned long)NULL; mesg[0].len = num_out_bytes; // mesg[0].delay_usecs = MY_SPIDEV_DELAY_USECS, // mesg[0].speed_hz = MY_SPIDEV_SPEED_HZ; mesg[0].bits_per_word = MY_SPIDEV_BITS_PER_WORD; mesg[0].cs_change = 0; num_tr++; // Read data mesg[1].tx_buf = (unsigned long)NULL; mesg[1].rx_buf = (unsigned long)in_buffer; mesg[1].len = num_in_bytes; // mesg[1].delay_usecs = MY_SPIDEV_DELAY_USECS, // mesg[1].speed_hz = MY_SPIDEV_SPEED_HZ; mesg[1].bits_per_word = MY_SPIDEV_BITS_PER_WORD; mesg[1].cs_change = 1; num_tr++; // Do the actual transmission if(num_tr > 0) { ret = ioctl(fd, SPI_IOC_MESSAGE(num_tr), mesg); if(ret == -1) { printf("Error: %d\n", errno); return -1; } } return 0; } Then I'm using this function: #define OPTICAL_SENSOR_ADDR "/dev/spidev0.0" ... int fd; fd = open(OPTICAL_SENSOR_ADDR, O_RDWR); if (fd<=0) { printf("Device not found\n"); exit(1); } uint8_t buffer1[1] = {0x3a}; uint8_t buffer2[1] = {0}; spidevReadRegister(fd, 1, buffer1, 1, buffer2); When I run it, the code get stuck on IOCTL! I did this way because, in order to read a register on the sensor, I need to send a byte with its address in it and then get the answer back without changing CS (however, when I tried using write() and read() functions, while learning, I got the same result, stuck on them). I'm aware that specifying .speed_hz causes a ENOPROTOOPT error on Atmel (I checked spidev.c) so I commented that part. Why does it get stuck? I though it can be as the device is created but it actually doesn't "feel" any hardware. As I wasn't sure if hardware SPI0 corresponded to bus_num 0 or 1, I tried both, but still no success (btw, which one is it?). UPDATE: I managed to have the SPI working! Half of it.. MOSI is transmitting the right data, but CLK doesn't start... any idea?

  Read the article

• Portable scripting language for a multi-server admin?

  - by Aaron

  Please Note: Portable as in portableapps.com, not the traditional definition. Originally posted on stackoverflow.com, asking here at another user's suggestion. I'm a DBA and sysadmin, mostly for Windows machines running SQL Server. I'm looking for a programming/scripting language for Windows that doesn't require Admin access or an installer, needing no install process other than expanding it into a folder. My intent is to have a language for automation on which I can standardize. Up to this point, I've been using a combination of batch files and Unix shell, using sh.exe from UnxUtils but it's far from a perfect solution. I've evaluated a handful of options, all of them have at least one serious shortcoming or another. I have a strong preference for something open source or dual license, but I'm more interested in finding the right tool than anything else. Not interested that anything that relies on Cygwin or Java, but at this point I'd be fine with something that needs .NET. Requirements: Manageable footprint (1-100 files, under 30 MB installed) Run on Windows XP and Server (2003+) No installer (exe, msi) Works with external pipes, processes, and files Support for MS SQL Server or ODBC connections Bonus Points: Open Source FFI for calling functions in native DLLs GUI support (native or gtk, wx, fltk, etc) Linux, AIX, and/or OS X support Dynamic, object oriented and/or functional, interpreted or bytecode compiled; interactive development Able to package or compile scripts into executables So far I've tried: Ruby: 148 MB on disk, 23000 files Portable Python: 54 MB on disk, 2800 files Strawberry Perl: 123 MB on disk, 3600 files REBOL: Great, except closed source and no MSSQL or ODBC in free version Squeak Smalltalk: Great, except poor support for scripting ---- cut: points of clarification ---- Why all the limitations? I realize some of my criteria seem arbitrarily confining. It's primarily a product my environment. I work as a SQL Server DBA and backup Unix admin at a division of a large company. In addition to near a hundred boxes running some version or another of SQL Server on Windows, I also support the SQL Server Express Edition installs on over a thousand machines in the field. Because of our security policies, I don't login rights on every machine. Often enough, an issue comes up and I'm given local Admin for some period of time. Often enough, it's some box I've never touched and don't have my own environment setup yet. I may have temporary admin rights on the box, but I'm not the admin for the machine- I'm just the DBA. I've no interest in stepping on the toes of the Windows admins, nor do I want to take over any of their duties. If I bring up "installing" something, suddenly it becomes a matter of interest for Production Control and the Windows admins; if I'm copying up a script, no one minds. The distinction may not mean much to the readers, but if someone gets the wrong idea I've suddenly got a long wait and significant overhead before I can get the tool installed and get the problem solved. That's why I want something that can be copied and run in the manner of a portable app. What about the small footprint? My company has three divisions, each in a different geographical location, and one of them is a new acquisition. We have different production control/security policies in each division. I support our MSSQL databases in all three divisions. The field machines are spread around the US, sometimes connecting to the VPN over very slow links. Installing Ruby \using psexec has taken a long time over these connections. In these instances, the bigger time waster seems to be archives with thousands and thousands of files rather than their sheer size. You could say I'm spoiled by Unix, where the admins usually have at least some modern scripting language installed; I'd use PowerShell, but I don't know it well and more importantly it isn't everywhere I need to work. It's a regular occurrence that I need to write, deploy and execute some script on short notice on some machine I've never on which logged in. Since having Ruby or something similar installed on every machine I'll ever need to touch is effectively impossible because of the approvals, time and and Windows admin labor needed I makes more sense find a solution that allows me to work on my own terms.

  Read the article

• Cross-platform, human-readable, du on root partition that truly ignores other filesystems

  - by nice_line

  I hate this so much: Linux builtsowell 2.6.18-274.7.1.el5 #1 SMP Mon Oct 17 11:57:14 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux df -kh Filesystem Size Used Avail Use% Mounted on /dev/mapper/mpath0p2 8.8G 8.7G 90M 99% / /dev/mapper/mpath0p6 2.0G 37M 1.9G 2% /tmp /dev/mapper/mpath0p3 5.9G 670M 4.9G 12% /var /dev/mapper/mpath0p1 494M 86M 384M 19% /boot /dev/mapper/mpath0p7 7.3G 187M 6.7G 3% /home tmpfs 48G 6.2G 42G 14% /dev/shm /dev/mapper/o10g.bin 25G 7.4G 17G 32% /app/SIP/logs /dev/mapper/o11g.bin 25G 11G 14G 43% /o11g tmpfs 4.0K 0 4.0K 0% /dev/vx lunmonster1q:/vol/oradb_backup/epmxs1q1 686G 507G 180G 74% /rpmqa/backup lunmonster1q:/vol/oradb_redo/bisxs1q1 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl1 lunmonster1q:/vol/oradb_backup/bisxs1q1 686G 507G 180G 74% /bisxs1q/backup lunmonster1q:/vol/oradb_exp/bisxs1q1 2.0T 1.1T 984G 52% /bisxs1q/exp lunmonster2q:/vol/oradb_home/bisxs1q1 10G 174M 9.9G 2% /bisxs1q/home lunmonster2q:/vol/oradb_data/bisxs1q1 52G 5.2G 47G 10% /bisxs1q/oradata lunmonster1q:/vol/oradb_redo/bisxs1q2 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl2 ip-address1:/vol/oradb_home/cspxs1q1 10G 184M 9.9G 2% /cspxs1q/home ip-address2:/vol/oradb_backup/cspxs1q1 674G 314G 360G 47% /cspxs1q/backup ip-address2:/vol/oradb_redo/cspxs1q1 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl1 ip-address2:/vol/oradb_exp/cspxs1q1 4.1T 1.5T 2.6T 37% /cspxs1q/exp ip-address2:/vol/oradb_redo/cspxs1q2 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl2 ip-address1:/vol/oradb_data/cspxs1q1 160G 23G 138G 15% /cspxs1q/oradata lunmonster1q:/vol/oradb_exp/epmxs1q1 2.0T 1.1T 984G 52% /epmxs1q/exp lunmonster2q:/vol/oradb_home/epmxs1q1 10G 80M 10G 1% /epmxs1q/home lunmonster2q:/vol/oradb_data/epmxs1q1 330G 249G 82G 76% /epmxs1q/oradata lunmonster1q:/vol/oradb_redo/epmxs1q2 5.0G 609M 4.5G 12% /epmxs1q/rdoctl2 lunmonster1q:/vol/oradb_redo/epmxs1q1 5.0G 609M 4.5G 12% /epmxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol1 183G 17G 157G 10% /slaxs1q/backup /dev/vx/dsk/slaxs1q/slaxs1q-vol4 173G 58G 106G 36% /slaxs1q/oradata /dev/vx/dsk/slaxs1q/slaxs1q-vol5 75G 952M 71G 2% /slaxs1q/exp /dev/vx/dsk/slaxs1q/slaxs1q-vol2 9.8G 381M 8.9G 5% /slaxs1q/home /dev/vx/dsk/slaxs1q/slaxs1q-vol6 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol3 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl2 /dev/mapper/appoem 30G 1.3G 27G 5% /app/em Yet, I equally, if not quite a bit more, also hate this: SunOS solarious 5.10 Generic_147440-19 sun4u sparc SUNW,SPARC-Enterprise Filesystem size used avail capacity Mounted on kiddie001Q_rpool/ROOT/s10s_u8wos_08a 8G 7.7G 1.3G 96% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 15G 1.8M 15G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab fd 0K 0K 0K 0% /dev/fd kiddie001Q_rpool/ROOT/s10s_u8wos_08a/var 31G 8.3G 6.6G 56% /var swap 512M 4.6M 507M 1% /tmp swap 15G 88K 15G 1% /var/run swap 15G 0K 15G 0% /dev/vx/dmp swap 15G 0K 15G 0% /dev/vx/rdmp /dev/dsk/c3t4d4s0 3 20G 279G 41G 88% /fs_storage /dev/vx/dsk/oracle/ora10g-vol1 292G 214G 73G 75% /o10g /dev/vx/dsk/oec/oec-vol1 64G 33G 31G 52% /oec/runway /dev/vx/dsk/oracle/ora9i-vol1 64G 33G 31G 59% /o9i /dev/vx/dsk/home 23G 18G 4.7G 80% /export/home /dev/vx/dsk/dbwork/dbwork-vol1 292G 214G 73G 92% /db03/wk01 /dev/vx/dsk/oradg/ebusredovol 2.0G 475M 1.5G 24% /u21 /dev/vx/dsk/oradg/ebusbckupvol 200G 32G 166G 17% /u31 /dev/vx/dsk/oradg/ebuscrtlvol 2.0G 475M 1.5G 24% /u20 kiddie001Q_rpool 31G 97K 6.6G 1% /kiddie001Q_rpool monsterfiler002q:/vol/ebiz_patches_nfs/NSA0304 203G 173G 29G 86% /oracle/patches /dev/odm 0K 0K 0K 0% /dev/odm The people with the authority don't rotate logs or delete packages after install in my environment. Standards, remediation, cohesion...all fancy foreign words to me. ============== How am I supposed to deal with / filesystem full issues across multiple platforms that have a devastating number of mounts? On Red Hat el5, du -x apparently avoids traversal into other filesystems. While this may be so, it does not appear to do anything if run from the / directory. On Solaris 10, the equivalent flag is du -d, which apparently packs no surprises, allowing Sun to uphold its legacy of inconvenience effortlessly. (I'm hoping I've just been doing it wrong.) I offer up for sacrifice my Frankenstein's monster. Tell me how ugly it is. Tell me I should download forbidden 3rd party software. Tell me I should perform unauthorized coreutils updates, piecemeal, across 2000 systems, with no single sign-on, no authorized keys, and no network update capability. Then, please help me make this bastard better: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shx | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" My biggest failure and regret is that it still requires a single character edit for Solaris: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shd | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" This will exclude all non / filesystems in a du search from the / directory by basically munging an egrepped df from a second pipe-delimited egrep regex subshell exclusion that is naturally further excluded upon by a third egrep in what I would like to refer to as "the whale." The munge-fest frantically escalates into some xargs du recycling where -x/-d is actually useful, and a final, gratuitous egrep spits out a list of directories that almost feels like an accomplishment: Linux: 54M etc/gconf 61M opt/quest 77M opt 118M usr/ ##===\ 149M etc 154M root 303M lib/modules 313M usr/java ##====\ 331M lib 357M usr/lib64 ##=====\ 433M usr/lib ##========\ 1.1G usr/share ##=======\ 3.2G usr/local ##========\ 5.4G usr ##<=============Ascending order to parent 94M app/SIP ##<==\ 94M app ##<=======Were reported as 7gb and then corrected by second du with -x. Solaris: 63M etc 490M bb 570M root/cores.ric.20100415 1.7G oec/archive 1.1G root/packages 2.2G root 1.7G oec Guess what? It's really slow. Edit: Are there any bash one-liner heroes out there than can turn my bloated abomination into divine intervention, or at least something resembling gingerly copypasta?

  Read the article

• Java: how to do fast copy of a BufferedImage's pixels? (include unit test)

  - by WizardOfOdds

  I want to do a copy (of a rectangle area) of the ARGB values from a source BufferedImage into a destination BufferedImage. No compositing should be done: if I copy a pixel with an ARGB value of 0x8000BE50 (alpha value at 128), then the destination pixel must be exactly 0x8000BE50, totally overriding the destination pixel. I've got a very precise question and I made a unit test to show what I need. The unit test is fully functional and self-contained and is passing fine and is doing precisely what I want. However, I want a faster and more memory efficient method to replace copySrcIntoDstAt(...). That's the whole point of my question: I'm not after how to "fill" the image in a faster way (what I did is just an example to have a unit test). All I want is to know what would be a fast and memory efficient way to do it (ie fast and not creating needless objects). The proof-of-concept implementation I've made is obviously very memory efficient, but it is slow (doing one getRGB and one setRGB for every pixel). Schematically, I've got this: (where A indicates corresponding pixels from the destination image before the copy) AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA And I want to have this: AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAABBBBAAA AAAAAAAAAAAAABBBBAAA AAAAAAAAAAAAAAAAAAAA where 'B' represents the pixels from the src image. I'm looking for an exact replacement of the method, not for an API link/quote. import org.junit.Test; import java.awt.image.BufferedImage; import static org.junit.Assert.*; public class TestCopy { private static final int COL1 = 0x8000BE50; // alpha at 128 private static final int COL2 = 0x1732FE87; // alpha at 23 @Test public void testPixelsCopy() { final BufferedImage src = new BufferedImage( 5, 5, BufferedImage.TYPE_INT_ARGB ); final BufferedImage dst = new BufferedImage( 20, 20, BufferedImage.TYPE_INT_ARGB ); convenienceFill( src, COL1 ); convenienceFill( dst, COL2 ); copySrcIntoDstAt( src, dst, 3, 4 ); for (int x = 0; x < dst.getWidth(); x++) { for (int y = 0; y < dst.getHeight(); y++) { if ( x >= 3 && x <= 7 && y >= 4 && y <= 8 ) { assertEquals( COL1, dst.getRGB(x,y) ); } else { assertEquals( COL2, dst.getRGB(x,y) ); } } } } // clipping is unnecessary private static void copySrcIntoDstAt( final BufferedImage src, final BufferedImage dst, final int dx, final int dy ) { // TODO: replace this by a much more efficient method for (int x = 0; x < src.getWidth(); x++) { for (int y = 0; y < src.getHeight(); y++) { dst.setRGB( dx + x, dy + y, src.getRGB(x,y) ); } } } // This method is just a convenience method, there's // no point in optimizing this method, this is not what // this question is about private static void convenienceFill( final BufferedImage bi, final int color ) { for (int x = 0; x < bi.getWidth(); x++) { for (int y = 0; y < bi.getHeight(); y++) { bi.setRGB( x, y, color ); } } } }

  Read the article

• Optimizing WordWrap Algorithm

  - by Milo

  I have a word-wrap algorithm that basically generates lines of text that fit the width of the text. Unfortunately, it gets slow when I add too much text. I was wondering if I oversaw any major optimizations that could be made. Also, if anyone has a design that would still allow strings of lines or string pointers of lines that is better I'd be open to rewriting the algorithm. Thanks void AguiTextBox::makeLinesFromWordWrap() { textRows.clear(); textRows.push_back(""); std::string curStr; std::string curWord; int curWordWidth = 0; int curLetterWidth = 0; int curLineWidth = 0; bool isVscroll = isVScrollNeeded(); int voffset = 0; if(isVscroll) { voffset = pChildVScroll->getWidth(); } int AdjWidthMinusVoffset = getAdjustedWidth() - voffset; int len = getTextLength(); int bytesSkipped = 0; int letterLength = 0; size_t ind = 0; for(int i = 0; i < len; ++i) { //get the unicode character letterLength = _unicodeFunctions.bringToNextUnichar(ind,getText()); curStr = getText().substr(bytesSkipped,letterLength); bytesSkipped += letterLength; curLetterWidth = getFont().getTextWidth(curStr); //push a new line if(curStr[0] == '\n') { textRows.back() += curWord; curWord = ""; curLetterWidth = 0; curWordWidth = 0; curLineWidth = 0; textRows.push_back(""); continue; } //ensure word is not longer than the width if(curWordWidth + curLetterWidth >= AdjWidthMinusVoffset && curWord.length() >= 1) { textRows.back() += curWord; textRows.push_back(""); curWord = ""; curWordWidth = 0; curLineWidth = 0; } //add letter to word curWord += curStr; curWordWidth += curLetterWidth; //if we need a Vscroll bar start over if(!isVscroll && isVScrollNeeded()) { isVscroll = true; voffset = pChildVScroll->getWidth(); AdjWidthMinusVoffset = getAdjustedWidth() - voffset; i = -1; curWord = ""; curStr = ""; textRows.clear(); textRows.push_back(""); ind = 0; curWordWidth = 0; curLetterWidth = 0; curLineWidth = 0; bytesSkipped = 0; continue; } if(curLineWidth + curWordWidth >= AdjWidthMinusVoffset && textRows.back().length() >= 1) { textRows.push_back(""); curLineWidth = 0; } if(curStr[0] == ' ' || curStr[0] == '-') { textRows.back() += curWord; curLineWidth += curWordWidth; curWord = ""; curWordWidth = 0; } } if(curWord != "") { textRows.back() += curWord; } updateWidestLine(); }

  Read the article

• Sending changes from multiple tables in disconnected dataset to SQLServer...

  - by Stecy

  We have a third party application that accept calls using an XML RPC mechanism for calling stored procs. We send a ZIP-compressed dataset containing multiple tables with a bunch of update/delete/insert using this mechanism. On the other end, a CLR sproc decompress the data and gets the dataset. Then, the following code gets executed: using (var conn = new SqlConnection("context connection=true")) { if (conn.State == ConnectionState.Closed) conn.Open(); try { foreach (DataTable table in ds.Tables) { string columnList = ""; for (int i = 0; i < table.Columns.Count; i++) { if (i == 0) columnList = table.Columns[0].ColumnName; else columnList += "," + table.Columns[i].ColumnName; } var da = new SqlDataAdapter("SELECT " + columnList + " FROM " + table.TableName, conn); var builder = new SqlCommandBuilder(da); builder.ConflictOption = ConflictOption.OverwriteChanges; da.RowUpdating += onUpdatingRow; da.Update(ds, table.TableName); } } catch (....) { ..... } } Here's the event handler for the RowUpdating event: public static void onUpdatingRow(object sender, SqlRowUpdatingEventArgs e) { if ((e.StatementType == StatementType.Update) && (e.Command == null)) { e.Command = CreateUpdateCommand(e.Row, sender as SqlDataAdapter); e.Status = UpdateStatus.Continue; } } and the CreateUpdateCommand method: private static SqlCommand CreateUpdateCommand(DataRow row, SqlDataAdapter da) { string whereClause = ""; string setClause = ""; SqlConnection conn = da.SelectCommand.Connection; for (int i = 0; i < row.Table.Columns.Count; i++) { char quoted; if ((row.Table.Columns[i].DataType == Type.GetType("System.String")) || (row.Table.Columns[i].DataType == Type.GetType("System.DateTime"))) quoted = '\''; else quoted = ' '; string val = row[i].ToString(); if (row.Table.Columns[i].DataType == Type.GetType("System.Boolean")) val = (bool)row[i] ? "1" : "0"; bool isPrimaryKey = false; for (int j = 0; j < row.Table.PrimaryKey.Length; j++) { if (row.Table.PrimaryKey[j].ColumnName == row.Table.Columns[i].ColumnName) { if (whereClause != "") whereClause += " AND "; if (row[i] == DBNull.Value) whereClause += row.Table.Columns[i].ColumnName + "=NULL"; else whereClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; isPrimaryKey = true; break; } } /* Only values for column that is not a primary key can be modified */ if (!isPrimaryKey) { if (setClause != "") setClause += ", "; if (row[i] == DBNull.Value) setClause += row.Table.Columns[i].ColumnName + "=NULL"; else setClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; } } return new SqlCommand("UPDATE " + row.Table.TableName + " SET " + setClause + " WHERE " + whereClause, conn); } However, this is really slow when we have a lot of records. Is there a way to optimize this or an entirely different way to send lots of udpate/delete on several tables? I would really much like to use TSQL for this but can't figure a way to send a dataset to a regular sproc. Additional notes: We cannot directly access the SQLServer database. We tried without compression and it was slower.

  Read the article

• Openfire and LDAP issues

  - by clsmith

  Thanks in advance for the help. Has anyone see this issue with openfire? Currently I use Openfire Fedora with Auth using windows 2003 and also use mysql for the database. When I bring up two clients and talk to each other the time is slow between messages. Sometimes it can take between 5-15 minutes for something sent to get to the person (this is with only two people on the openfire server). I ran a tcp dump using port 389 and see that the machine is running thousands of queries against ldap. When i plug it into wireshark I notice that it is transferring the entire contact list or checking on the status of the entire contact list ? When I run debug on openfire itself I am presented with only this small message in the log: 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Trying to find a groups's DN based on it's groupname. cn: Spark agents CLT, Base DN: OU="Hidden",DC="Hidden",DC="net"... 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished 2010.06.08 07:01:17 LdapManager: Trying to find a groups's DN based on it's groupname. cn: Spark agents CLT, Base DN: OU="Hidden",DC="Hidden",DC="net"... 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished I thought this was a configuration on my end and started to look into the cache settings on the openfire webpages. I tweaked the settings as recommend by the pages and still get the same issues. I doesnt seem to cache the contact list or this might be a feature never fixed or implemented. Has anyone gone through this before ? I have searched online and I see others have great experience with openfire with no issues like I have, or is it because noone checked the queries ? For the time being I created a new Domain Controller and moved openfire to that computer so it can run local queries. This seems to help reduce the speed alot, but when I run the server performance manager tool I see that with two people only using that openfire server I run 593.7 request per second. Thanks for your help, if I didnt provide enough data please let me know what you need and I can find it.

  Read the article

• How to drill down with jQuery?

  - by Timothy Reed

  I'm new to jQuery so sorry if this sounds stupid but I'm having truble drilling down to other elemnts. Paticularly I want to fade in the .menu li a:hover class with jquery. .menu { padding:0; margin:0; list-style:none; } .menu li { float:left; margin-left:1px; } .menu li a { display:block; height:44px; line-height:40px; padding:0 5px; float:right; color:#fff; text-decoration:none; font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif; font-size:12px; font-weight:bold; } .menu li a b { text-transform:uppercase; } .menu li a:hover { color:#E4FFC5; background: url(../images/arrow.png) no-repeat center bottom; } .current { background: url(../images/arrow.png) no-repeat center bottom; font-size:16px; font-weight:bold; } .spacer p { display:block; height:44px; line-height:40px; padding:0 5px; float:right; color:#fff; text-decoration:none; font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif; font-size:12px; font-weight:bold; } <ul class="menu"> <li class="current"><a href="index.html">Home</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Mission &amp; Values </a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Caregivers</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Special Programs </a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Enployment</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Contact</a></li> </ul> <script type="text/javascript"> $(function() { $('a').mouseover(function() { $('.logo').animate ({opacity:'0.6'}, 'normal'); }); $('a').mouseout (function() { $('.logo').animate ({opacity:'1'}, 'normal'); $('.menu li a:hover').fadeIn ('slow'); }); </script>

  Read the article

• Pagination number elements do not work - jquery

  - by ClarkSKent

  Hello, I am trying to get my pagination links to work. It seems when I click any of the pagination number links to go the next page, the new content does not load. literally nothing happens and when looking at the console in Firebug, nothing is sent or loaded. I have on the main page 3 links to filter the content and display it. When any of these links are clicked the results are loaded and displayed along with the associated pagination numbers for that specific content. Here is the main page so you can see what the structure looks like for the jquery: <?php include_once('generate_pagination.php'); ?> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script> <script type="text/javascript" src="jquery_pagination.js"></script> <div id="loading" ></div> <div id="content" data-page="1"></div> <ul id="pagination"> <?php generate_pagination($sql) ?> </ul> <br /> <br /> <a href="#" class="category" id="marketing">Marketing</a> <a href="#" class="category" id="automotive">Automotive</a> <a href="#" class="category" id="sports">Sports</a> The jquery below is pretty simple and I don't think I need to explain what it does. I believe the problem may be with the $("#pagination li").click(function(){ since the li elements are the numbers that do not work when clicked. Even when I try to fadeOut or hide the content on click nothing happens. I'm pretty new to the jquery structure so I do not fully understand where the real problem is occurring, this is just from my observation. The jquery file looks like this: $(document).ready(function(){ //Display Loading Image function Display_Load() { $("#loading").fadeIn(900,0); $("#loading").html("<img src='bigLoader.gif' />"); } //Hide Loading Image function Hide_Load() { $("#loading").fadeOut('slow'); }; //Default Starting Page Results $("#pagination li:first").css({'color' : '#FF0084'}).css({'border' : 'none'}); Display_Load(); $("#content").load("pagination_data.php?page=1", Hide_Load()); //Pagination Click $("#pagination li").click(function(){ Display_Load(); //CSS Styles $("#pagination li") .css({'border' : 'solid #dddddd 1px'}) .css({'color' : '#0063DC'}); $(this) .css({'color' : '#FF0084'}) .css({'border' : 'none'}); //Loading Data var pageNum = this.id; $("#content").load("pagination_data.php?page=" + pageNum, function(){ $(this).attr('data-page', pageNum); Hide_Load(); }); }); // Editing below. // Sort content Marketing $("a.category").click(function() { Display_Load(); var this_id = $(this).attr('id'); $.get("pagination.php", { category: this.id }, function(data){ //Load your results into the page var pageNum = $('#content').attr('data-page'); $("#pagination").load('generate_pagination.php?category=' + pageNum +'&ids='+ this_id ); $("#content").load("filter_marketing.php?page=" + pageNum +'&id='+ this_id, Hide_Load()); }); }); }); If anyone could help me on this that would be great, Thanks. EDIT: Here are the innards of <ul id="pagination">: <?php function generate_pagination($sql) { include_once('config.php'); $per_page = 3; //Calculating no of pages $result = mysql_query($sql); $count = mysql_fetch_row($result); $pages = ceil($count[0]/$per_page); //Pagination Numbers for($i=1; $i<=$pages; $i++) { echo '<li class="page_numbers" id="'.$i.'">'.$i.'</li>'; } } $ids=$_GET['ids']; generate_pagination("SELECT COUNT(*) FROM explore WHERE category='$ids'"); ?>

  Read the article

• Why are there so many man-made edge cases in IT, and is there any hope for simplification / unificat

  - by Hamish Grubijan

  This question is meant to generate discussion and so it is marked as community wiki. My observation is that the field of information technology grows so rapidly and randomly, that for many it takes a lot of time to learn many intricacies of some tools that will be obsolete in just short 3 years. If you look at the questions asked on StackOverflow ... at least half of them stem from the fact that some language / tool / API / protocol was poorly designed, is backwards and has gotchas. There are so many things which distract developers from converting English into machine code; instead they spend their time configuring stuff and gluing together things that do not really fit. How many times do you pick up somebody else's project (or someone picks up yours :) ) and realize that this program does not need half of the dialogs that it has, and that the logic can be simplified a great deal? But, it had to be made and sold here before a better thing is made and sold elsewhere, and hence all this rush. I often wish that things would just slow down. I do not want Microsoft Windows to run on my car's computer, my watch, my table, my toaster oven, and my toilet seat. I'd rather have Windows that DOES NOT HAVE WINDOWS REGISTRY, I'd rather have Windows that allows two different programs to work on the same file at the same time, the way it works on Unix systems. Microsoft is just an example. I am looking forward to the day when I do not have to worry about Windows vs Unix new line break, when System32 actually means that this directory contains 32-bit binaries, and not 64-bit ones, the day when dll hell and manifest hell are no longer an issue, the day when it takes me a lot less than 3 months on a new job to learn the system. I do not mean learning the entire code base of a product (depending on the size of it, it can take a long time). I mean - remembering which build-assisting scripts are written in Perl and which version of it, and which ones are done through .bat files, when do I need to manually make every file in some directory writable before running a script, or else a critical step of a database maintenance home-grown tool will bomb, and it will take 2 days to clean that up. Makes me wonder if humans enslaved computers, or if it is the other way around. The key is that improving those things will not bring extra revenue, and hence those taking the time to fix crap like that are not "business focused". However, these imperfections irritate me immensely, particularly because my memory is limited - I can hold only a small portion of that useless knowledge of a system in my head at any given point in time. I must not be alone. Did you also happen to notice that a programmer can waste a lot of time on things that should have been a lot more straight-forward? Is there hope? Will things get better/simpler in the future, or will there be a lot more IT crap floating around? I suppose I see diversity of tools, protocols, etc. as a bad thing. Thank you for participation.

  Read the article

• What is the best way to test using grails using IDEA?

  - by egervari

  I am seriously having a very non-pleasant time testing using Grails. I will describe my experience, and I'd like to know if there's a better way. The first problem I have with testing is that Grails doesn't give immediate feedback to the developer when .save() fails inside of an integration test. So let's say you have a domain class with 12 fields, and 1 of them is violating a constraint and you don't know it when you create the instance... it just doesn't save. Naturally, the test code afterward is going to fail. This is most troublesome because the thingy under test is probably fine... and the real risk and pain is the setup code for the test itself. So, I've tried to develop the habit of using .save(failOnError: true) to avoid this problem, but that's not something that can be easily enforced by everyone working on the project... and it's kind of bloaty. It'd be nice to turn this on for code that is running as part of a unit test automatically. Integration Tests run slow. I cannot understand how 1 integration test that saves 1 object takes 15-20 seconds to run. With some careful test planning, I've been able to get 1000 tests talking to an actual database and doing dbunit dumps after every test to happen in about the same time! This is dumb. It is hard to run all the unit tests and not integration tests in IDEA. Integration tests are a massive pain. Idea actually shows a GREEN BAR when integration tests fail. The output given by grails indicates that something failed, but it doesn't say what it was. It says to look in the test reports... which forces the developer to launch up their file system to hunt the stupid html file down. What a pain. Then once you got the html file and click to the failing test, it'll tell you a line number. Since these reports are not in the IDE, you can't just click the stack trace to go to that line of code... you gotta go back and find it yourself. ARGGH!@!@! Maybe people put up with this, but I refuse. Testing should not be this painful. It should be fast and painless, or people won't do it. Please help. What is the solution? Rails instead of Grails? Something else entirely? I love the Grails framework, but they never demo their testing for a reason. They have a snazzy framework, but the testing is painful. After having used Scala for the last 1.5 months, and being totally spoiled by ScalaTest... I can't go back to this.

  Read the article

• Why isn't my algorithm for find the biggest and smallest inputs working?

  - by Matt Ellen

  I have started a new job, and with it comes a new language: Ironpython. Thankfully a good language :D Before starting I got to grips with Python on the whole, but that was only a week's worth of learning. Now I'm writing actual code. I've been charged with writing an algorithm that finds the best input parameter to collect data with. The basic algorithm is (as I've been instructed): Set the input parameter to a good guess Start collecting data When data is available stop collecting find the highest point If the point before this (i.e. for the previous parameter value) was higher and the point before that was lower then we've found the max otherwise the input parameter is increased by the initial guess. goto 2 If the max is found then the min needs to be found. To do this the algorithm carries on increasing the input, but by 1/10 of the max, until the current point is greater than the previous point and the point before that is also greater. Once the min is found then the algorithm stops. Currently I have a simplified data generator outputting the sin of the input, so that I know that the min value should be PI and the max value should be PI/2 The main Python code looks like this (don't worry, this is just for my edification, I don't write real code like this): import sys sys.path.append(r"F:\Programming Source\C#\PythonHelp\PythonHelp\bin\Debug") import clr clr.AddReferenceToFile("PythonHelpClasses.dll") import PythonHelpClasses from PHCStruct import Helper from System import Math helper = Helper() def run(): b = PythonHelpClasses.Executor() a = PythonHelpClasses.HasAnEvent() b.Input = 0.0 helper.__init__() def AnEventHandler(e): b.Stop() h = helper h.lastLastVal, h.lastVal, h.currentVal = h.lastVal, h.currentVal, e.Number if h.lastLastVal < h.lastVal and h.currentVal < h.lastVal and h.NotPast90: h.NotPast90 = False h.bestInput = h.lastInput inputInc = 0.0 if h.NotPast90: inputInc = Math.PI/10.0 else: inputInc = h.bestInput/10.0 if h.lastLastVal > h.lastVal and h.currentVal > h.lastVal and h.NotPast180: h.NotPast180 = False if h.NotPast180: h.lastInput, b.Input = b.Input, b.Input + inputInc b.Start(a) else: print "Best input:", h.bestInput print "Last input:", h.lastInput b.Stop() a.AnEvent += AnEventHandler b.Start(a) PHCStruct.py: class Helper(): def __init__(self): self.currentVal = 0 self.lastVal = 0 self.lastLastVal = 0 self.NotPast90 = True self.NotPast180 = True self.bestInput = 0 self.lastInput = 0 PythonHelpClasses has two small classes I wrote in C# before I realised how to do it in Ironpython. Executor runs a delegate asynchronously while it's running member is true. The important code: public void Start(HasAnEvent hae) { running = true; RunDelegate r = new RunDelegate(hae.UpdateNumber); AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar = r.BeginInvoke(Input, ac, null); } public void Stop() { running = false; } public void UpdateDone(IAsyncResult ar) { RunDelegate r = (RunDelegate)((AsyncResult)ar).AsyncDelegate; r.EndInvoke(ar); if (running) { AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar2 = r.BeginInvoke(Input, ac, null); } } HasAnEvent has a function that generates the sin of its input and fires an event with that result as its argument. i.e.: public void UpdateNumber(double val) { AnEventArgs e = new AnEventArgs(Math.Sin(val)); System.Threading.Thread.Sleep(1000); if (null != AnEvent) { AnEvent(e); } } The sleep is in there just to slow things down a bit. The problem I am getting is that the algorithm is not coming up with the best input being PI/2 and the final input being PI, but I can't see why. Also the best and final inputs are different each time I run the programme. Can anyone see why? Also when the algorithm terminates the best and final inputs are printed to the screen multiple times, not just once. Can someone explain why?

  Read the article

• Large concurrent user performance issues for Apache + mod_jk + GlassFish v3.1 clusters

  - by user10035

  I am running a java ee 6 ear application on a GlassFish v3.1 ( 2 clusters with 2 instances each) load balanced by an Apache v2.2 with mod_jk - all on the same server (Windows Server 2003 R2, Intel Xeon CPU x5670 @2.93Ghz, 6GB RAM, 2 cpus). The web application is accessed by around ~100 users. When they all try to access it at the same time every morning ~8am, the response is very slow while trying to access the main jsf home page. Apart from that I have seen the CPU usage spike upto 99% by the httpd process during the day frequently and I start seeing errors in the mod_jk.log file. [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_service::jk_ajp_common.c (2543): (myAppLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) Any suggestions on how I can go about improving this? Apache configuration is mostly the default as shown below ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2" Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule include_module modules/mod_include.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule setenvif_module modules/mod_setenvif.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/" </IfModule> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-mpm.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" JkMount /myApp/* loadbalancerLocal JkMount /myAppRemote/* loadbalancerRemote JkMount /myApp loadbalancerLocal JkMount /myAppRemote loadbalancerRemote The workers.properties config file is: worker.list=loadbalancerLocal,loadbalancerRemote worker.myAppLocalInstance1.type=ajp13 worker.myAppLocalInstance1.host=localhost worker.myAppLocalInstance1.port=8109 worker.myAppLocalInstance1.lbfactor=1 worker.myAppLocalInstance1.socket_keepalive=1 worker.myAppLocalInstance1.socket_timeout=1000 worker.myAppLocalInstance2.type=ajp13 worker.myAppLocalInstance2.host=localhost worker.myAppLocalInstance2.port=8209 worker.myAppLocalInstance2.lbfactor=1 worker.myAppLocalInstance2.socket_keepalive=1 worker.myAppLocalInstance2.socket_timeout=1000 worker.myAppLocalInstance3.type=ajp13 worker.myAppLocalInstance3.host=localhost worker.myAppLocalInstance3.port=8309 worker.myAppLocalInstance3.lbfactor=1 worker.myAppLocalInstance3.socket_keepalive=1 worker.myAppLocalInstance3.socket_timeout=1000 worker.myAppLocalInstance4.type=ajp13 worker.myAppLocalInstance4.host=localhost worker.myAppLocalInstance4.port=8409 worker.myAppLocalInstance4.lbfactor=1 worker.myAppLocalInstance4.socket_keepalive=1 worker.myAppLocalInstance4.socket_timeout=1000 worker.myAppRemoteInstance1.type=ajp13 worker.myAppRemoteInstance1.host=localhost worker.myAppRemoteInstance1.port=8509 worker.myAppRemoteInstance1.lbfactor=1 worker.myAppRemoteInstance1.socket_keepalive=1 worker.myAppRemoteInstance1.socket_timeout=1000 worker.myAppRemoteInstance2.type=ajp13 worker.myAppRemoteInstance2.host=localhost worker.myAppRemoteInstance2.port=8609 worker.myAppRemoteInstance2.lbfactor=1 worker.myAppRemoteInstance2.socket_keepalive=1 worker.myAppRemoteInstance2.socket_timeout=1000 worker.myAppRemoteInstance3.type=ajp13 worker.myAppRemoteInstance3.host=localhost worker.myAppRemoteInstance3.port=8709 worker.myAppRemoteInstance3.lbfactor=1 worker.myAppRemoteInstance3.socket_keepalive=1 worker.myAppRemoteInstance3.socket_timeout=1000 worker.myAppRemoteInstance4.type=ajp13 worker.myAppRemoteInstance4.host=localhost worker.myAppRemoteInstance4.port=8809 worker.myAppRemoteInstance4.lbfactor=1 worker.myAppRemoteInstance4.socket_keepalive=1 worker.myAppRemoteInstance4.socket_timeout=1000 worker.loadbalancerLocal.type=lb worker.loadbalancerLocal.sticky_session=True worker.loadbalancerLocal.balance_workers=myAppLocalInstance1,myAppLocalInstance2,myAppLocalInstance3,myAppLocalInstance4 worker.loadbalancerRemote.type=lb worker.loadbalancerRemote.balance_workers=myAppRemoteInstance1,myAppRemoteInstance2,myAppRemoteInstance3,myAppRemoteInstance4 worker.loadbalancerRemote.sticky_session=True

  Read the article

• Random Complete System Unresponsiveness Running Mathematical Functions

  - by Computer Guru

  I have a program that loads a file (anywhere from 10MB to 5GB) a chunk at a time (ReadFile), and for each chunk performs a set of mathematical operations (basically calculates the hash). After calculating the hash, it stores info about the chunk in an STL map (basically <chunkID, hash>) and then writes the chunk itself to another file (WriteFile). That's all it does. This program will cause certain PCs to choke and die. The mouse begins to stutter, the task manager takes 2 min to show, ctrl+alt+del is unresponsive, running programs are slow.... the works. I've done literally everything I can think of to optimize the program, and have triple-checked all objects. What I've done: Tried different (less intensive) hashing algorithms. Switched all allocations to nedmalloc instead of the default new operator Switched from stl::map to unordered_set, found the performance to still be abysmal, so I switched again to Google's dense_hash_map. Converted all objects to store pointers to objects instead of the objects themselves. Caching all Read and Write operations. Instead of reading a 16k chunk of the file and performing the math on it, I read 4MB into a buffer and read 16k chunks from there instead. Same for all write operations - they are coalesced into 4MB blocks before being written to disk. Run extensive profiling with Visual Studio 2010, AMD Code Analyst, and perfmon. Set the thread priority to THREAD_MODE_BACKGROUND_BEGIN Set the thread priority to THREAD_PRIORITY_IDLE Added a Sleep(100) call after every loop. Even after all this, the application still results in a system-wide hang on certain machines under certain circumstances. Perfmon and Process Explorer show minimal CPU usage (with the sleep), no constant reads/writes from disk, few hard pagefaults (and only ~30k pagefaults in the lifetime of the application on a 5GB input file), little virtual memory (never more than 150MB), no leaked handles, no memory leaks. The machines I've tested it on run Windows XP - Windows 7, x86 and x64 versions included. None have less than 2GB RAM, though the problem is always exacerbated under lower memory conditions. I'm at a loss as to what to do next. I don't know what's causing it - I'm torn between CPU or Memory as the culprit. CPU because without the sleep and under different thread priorities the system performances changes noticeably. Memory because there's a huge difference in how often the issue occurs when using unordered_set vs Google's dense_hash_map. What's really weird? Obviously, the NT kernel design is supposed to prevent this sort of behavior from ever occurring (a user-mode application driving the system to this sort of extreme poor performance!?)..... but when I compile the code and run it on OS X or Linux (it's fairly standard C++ throughout) it performs excellently even on poor machines with little RAM and weaker CPUs. What am I supposed to do next? How do I know what the hell it is that Windows is doing behind the scenes that's killing system performance, when all the indicators are that the application itself isn't doing anything extreme? Any advice would be most welcome.

  Read the article

• Calculus? Need help solving for a time-dependent variable given some other variables.

  - by user451527

  Long story short, I'm making a platform game. I'm not old enough to have taken Calculus yet, so I know not of derivatives or integrals, but I know of them. The desired behavior is for my character to automagically jump when there is a block to either side of him that is above the one he's standing on; for instance, stairs. This way the player can just hold left / right to climb stairs, instead of having to spam the jump key too. The issue is with the way I've implemented jumping; I've decided to go mario-style, and allow the player to hold 'jump' longer to jump higher. To do so, I have a 'jump' variable which is added to the player's Y velocity. The jump variable increases to a set value when the 'jump' key is pressed, and decreases very quickly once the 'jump' key is released, but decreases less quickly so long as you hold the 'jump' key down, thus providing continuous acceleration up as long as you hold 'jump.' This also makes for a nice, flowing jump, rather than a visually jarring, abrupt acceleration. So, in order to account for variable stair height, I want to be able to calculate exactly what value the 'jump' variable should get in order to jump exactly to the height of the stair; preferably no more, no less, though slightly more is permissible. This way the character can jump up steep or shallow flights of stairs without it looking weird or being slow. There are essentially 5 variables in play: h -the height the character needs to jump to reach the stair top<br> j -the jump acceleration variable<br> v -the vertical velocity of the character<br> p -the vertical position of the character<br> d -initial vertical position of the player minus final position<br> Each timestep:<br> j -= 1.5; //the jump variable's deceleration<br> v -= j; //the jump value's influence on vertical speed<br> v *= 0.95; //friction on the vertical speed<br> v += 1; //gravity<br> p += v; //add the vertical speed to the vertical position<br> v-initial is known to be zero<br> v-final is known to be zero<br> p-initial is known<br> p-final is known<br> d is known to be p-initial minus p-final<br> j-final is known to be zero<br> j-initial is unknown<br> Given all of these facts, how can I make an equation that will solve for j? tl;dr How do I Calculus? Much thanks to anyone who's made it this far and decides to plow through this problem.

  Read the article

• Play Video File in Asp. Net 3.5 in IIS

  - by Sneha Joshi

  I have developed an application to upload a video on the server and then play it. It runs well when i execute it in Visual Studio 2008 in-built web server.. But when I configure it on IIS, the video does not play... Is there any settings needed in IIS to play video ?? The code of Button Click event - **protected void btnPlayVideo_Click(object sender, EventArgs e) { try { string himaSagarURL = this.lnkbtnVideo.Text; bool isFullSize = false; this.Literal1.Text = this.Play_Video(himaSagarURL, isFullSize); } catch (Exception ex) { this.Response.Write(ex.ToString()); } } This button click event calls the Play_Video method which is given below.. The code I used for embedding - private string Play_Video(string sagarURL, bool isFullSize) { string himaSagarObject = ""; sagarURL = sagarURL + ""; sagarURL = sagarURL.Trim(); if (sagarURL.Length > 0) { //Continue. } else { throw new System.ArgumentNullException("sagarURL"); } string himaSagarWidthAndHeight = ""; if (isFullSize) { himaSagarWidthAndHeight = ""; } else { himaSagarWidthAndHeight = "width='640' height='480'"; } himaSagarObject = himaSagarObject + "<object classid='CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95' id='player' " + himaSagarWidthAndHeight + " standby='Please wait while the object is loaded...'>"; himaSagarObject = himaSagarObject + "<param name='url' value='" + sagarURL + "' />"; himaSagarObject = himaSagarObject + "<param name='src' value='" + sagarURL + "' />"; himaSagarObject = himaSagarObject + "<param name='AutoStart' value='true' />"; himaSagarObject = himaSagarObject + "<param name='Balance' value='0' />"; //-100 is fully left, 100 is fully right. himaSagarObject = himaSagarObject + "<param name='CurrentPosition' value='0' />"; //Position in seconds when starting. himaSagarObject = himaSagarObject + "<param name='showcontrols' value='true' />"; //Show play/stop/pause controls. himaSagarObject = himaSagarObject + "<param name='enablecontextmenu' value='true' />"; //Allow right-click. himaSagarObject = himaSagarObject + "<param name='fullscreen' value='" + isFullSize.ToString() + "' />"; //Start in full screen or not. himaSagarObject = himaSagarObject + "<param name='mute' value='false' />"; himaSagarObject = himaSagarObject + "<param name='PlayCount' value='1' />"; //Number of times the content will play. himaSagarObject = himaSagarObject + "<param name='rate' value='1.0' />"; //0.5=Slow, 1.0=Normal, 2.0=Fast himaSagarObject = himaSagarObject + "<param name='uimode' value='full' />"; // full, mini, custom, none, invisible himaSagarObject = himaSagarObject + "<param name='showdisplay' value='true' />"; //Show or hide the name of the file. himaSagarObject = himaSagarObject + "<param name='volume' value='50' />"; // 0=lowest, 100=highest himaSagarObject = himaSagarObject + "</object>"; return himaSagarObject; }**

  Read the article

• Can this be improved? Scrubbing of dangerous html tags.

  - by chobo2

  I been finding that for something that I consider pretty import there is very little information or libraries on how to deal with this problem. I found this while searching. I really don't know all the million ways that a hacker could try to insert the dangerous tags. I have a rich html editor so I need to keep non dangerous tags but strip out bad ones. So is this script missing anything? It uses html agility pack. public string ScrubHTML(string html) { HtmlDocument doc = new HtmlDocument(); doc.LoadHtml(html); //Remove potentially harmful elements HtmlNodeCollection nc = doc.DocumentNode.SelectNodes("//script|//link|//iframe|//frameset|//frame|//applet|//object|//embed"); if (nc != null) { foreach (HtmlNode node in nc) { node.ParentNode.RemoveChild(node, false); } } //remove hrefs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("href", "#"); } } //remove img with refs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("src", "#"); } } //remove on<Event> handlers from all tags nc = doc.DocumentNode.SelectNodes("//*[@onclick or @onmouseover or @onfocus or @onblur or @onmouseout or @ondoubleclick or @onload or @onunload]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("onFocus"); node.Attributes.Remove("onBlur"); node.Attributes.Remove("onClick"); node.Attributes.Remove("onMouseOver"); node.Attributes.Remove("onMouseOut"); node.Attributes.Remove("onDoubleClick"); node.Attributes.Remove("onLoad"); node.Attributes.Remove("onUnload"); } } // remove any style attributes that contain the word expression (IE evaluates this as script) nc = doc.DocumentNode.SelectNodes("//*[contains(translate(@style, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'expression')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("stYle"); } } return doc.DocumentNode.WriteTo(); } Edit 2 people have suggested whitelisting. I actually like the idea of whitelisting but never actually did it because no one can actually tell me how to do it in C# and I can't even really find tutorials for how to do it in c#(the last time I looked. I will check it out again). How do you make a white list? Is it just a list collection? How do you actual parse out all html tags, script tags and every other tag? Once you have the tags how do you determine which ones are allowed? Compare them to you list collection? But what happens if the content is coming in and has like 100 tags and you have 50 allowed. You got to compare each of those 100 tag by 50 allowed tags. Thats quite a bit to go through and could be slow. Once you found a invalid tag how do you remove it? I don't really want to reject a whole set of text if one tag was found to be invalid. I rather remove and insert the rest. Should I be using html agility pack?

  Read the article

• Multi-threaded .NET application blocks during file I/O when protected by Themida

  - by Erik Jensen

  As the title says I have a .NET application that is the GUI which uses multiple threads to perform separate file I/O and notice that the threads occasionally block when the application is protected by Themida. One thread is devoted to reading from serial COM port and another thread is devoted to copying files. What I experience is occasionally when the file copy thread encounters a network delay, it will block the other thread that is reading from the serial port. In addition to slow network (which can be transient), I can cause the problem to happen more frequently by making a PathFileExists call to a bad path e.g. PathFileExists("\\\\BadPath\\file.txt"); The COM port reading function will block during the call to ReadFile. This only happens when the application is protected by Themida. I have tried under WinXP, Win7, and Server 2012. In a streamlined test project, if I replace the .NET application with a MFC unmanaged application and still utilize the same threads I see no issue even when protected with Themida. I have contacted Oreans support and here is their response: The way that a .NET application is protected is very different from a native application. To protect a .NET application, we need to hook most of the file access APIs in order to "cheat" the .NET Framework that the application is protected. I guess that those special hooks (on CreateFile, ReadFile...) are delaying a bit the execution in your application and the problem appears. We did a test making those hooks as light as possible (with minimum code on them) but the problem still appeared in your application. The rest of software protectors that we tried (like Enigma, Molebox...) also use a similar hooking approach as it's the only way to make the .NET packed file to work. If those hooks are not present, the .NET Framework will abort execution as it will see that the original file was tampered (due to all Microsoft checks on .NET files) Those hooks are not present in a native application, that's why it should be working fine on your native application. Oreans support tried other software protectors such as Enigma Protector, Engima VirtualBox, and Molebox and all exhibit the exact same problem. What I have found as a work around is to separate out the file copy logic (where the file exists call is being made) to be performed in a completely separate process. I have experimented with converting the thread functions from unmanaged C++ to VB.NET equivalents (PathFileExists - System.IO.File.Exists and CreateFile/ReadFile - System.IO.Ports.SerialPort.Open/Read) and still see the same serial port read blocked when the file check or copy call is delayed. I have also tried setting the ReadFile to work asynchronously but that had no effect. I believe I am dealing with some low-level windows layer that no matter the language it exhibits a block on a shared resource -- and only when the application is executing under a single .NET process protected by Themida which evidently installs some hooks to allow .NET execution. At this time converting the entire application away from .NET is not an option. Nor is separating out the file copy logic to a separate task. I am wondering if anyone else has more knowledge of how a file operation can block another thread reading from a system port. I have included here example applications that show the problem: https://db.tt/cNMYfEIg - VB.NET https://db.tt/Y2lnTqw7 - MFC They are Visual Studio 2010 solutions. When running the themida protected exe, you can see when the FileThread counter pauses (executing the File.Exists call) while the ReadThread counter also pauses. When running non-protected visual studio output exe, the ReadThread counter does not pause which is how we expect it to function. Thanks!

  Read the article

• Parsing xml file that comes in as one object per line

  - by Casey

  I haven't been here in so long, I forgot my prior account! Anyways, I am working on parsing an xml document that comes in ugly. It is for banking statements. Each line is a <statement>all tags</statement>. Now, what I need to do is read this file in, and parse the XML document at the same time, while formatting it more human readable too. Point beeing, Original input looks like this: <statement><accountHeader><fiAddress></fiAddress><accountNumber></accountNumber><startDate>20140101</startDate><endDate>20140228</endDate><statementGroup>1</statementGroup><sortOption>0</sortOption><memberBranchCode>1</memberBranchCode><memberName></memberName><jointOwner1Name></jointOwner1Name><jointOwner2Name></jointOwner2Name></summary></statement> <statement><accountHeader><fiAddress></fiAddress><accountNumber></accountNumber><startDate>20140101</startDate><endDate>20140228</endDate><statementGroup>1</statementGroup><sortOption>0</sortOption><memberBranchCode>1</memberBranchCode><memberName></memberName><jointOwner1Name></jointOwner1Name><jointOwner2Name></jointOwner2Name></summary></statement> <statement><accountHeader><fiAddress></fiAddress><accountNumber></accountNumber><startDate>20140101</startDate><endDate>20140228</endDate><statementGroup>1</statementGroup><sortOption>0</sortOption><memberBranchCode>1</memberBranchCode><memberName></memberName><jointOwner1Name></jointOwner1Name><jointOwner2Name></jointOwner2Name></summary></statement> I need the final output to be as follows: <statement> <name></name> <address></address> </statement> This is fine and dandy. I am using the following "very slow considering 5.1 million lines, 254k data file, and about 60k statements takes around 8 minutes". foreach(String item in lines) { XElement xElement = XElement.Parse(item); sr.WriteLine(xElement.ToString().Trim()); } Then when the file is formatted this is what sucks. I need to check every single tag in transaction elements, and if a tag is missing that could be there, I have to fill it in. Our designer software will default prior values in if a tag is possible, and the current objects does not have. It defaults in the value of a prior one that was not Null. "I know, and they swear up and down it is not a bug... ok?" So, that is also taking about 5 to 10 minutes. I need to break all this down, and find a faster method for working with the initial XML. This is a preprocess action, and cannot take that long if not necessary. It just seems redundant. Is there a better way to parse the XML, or is this the best I can do? I parse the XML, write to a temp file, and then read that file in, to the output file inserting the missing tags. 2 IO runs for one process. Yuck.

  Read the article

• UI not updated while using ProgressMonitorInputStream in Swing to monitor compressed file decompress

  - by Bozhidar Batsov

  I'm working on swing application that relies on an embedded H2 database. Because I don't want to bundle the database with the app(the db is frequently updated and I want new users of the app to start with a recent copy), I've implemented a solution which downloads a compressed copy of the db the first time the application is started and extracts it. Since the extraction process might be slow I've added a ProgressMonitorInputStream to show to progress of the extraction process - unfortunately when the extraction starts, the progress dialog shows up but it's not updated at all. It seems like to events are getting through to the event dispatch thread. Here is the method: public static String extractDbFromArchive(String pathToArchive) { if (SwingUtilities.isEventDispatchThread()) { System.out.println("Invoking on event dispatch thread"); } // Get the current path, where the database will be extracted String currentPath = System.getProperty("user.home") + File.separator + ".spellbook" + File.separator; LOGGER.info("Current path: " + currentPath); try { //Open the archive FileInputStream archiveFileStream = new FileInputStream(pathToArchive); // Read two bytes from the stream before it used by CBZip2InputStream for (int i = 0; i < 2; i++) { archiveFileStream.read(); } // Open the gzip file and open the output file CBZip2InputStream bz2 = new CBZip2InputStream(new ProgressMonitorInputStream( null, "Decompressing " + pathToArchive, archiveFileStream)); FileOutputStream out = new FileOutputStream(ARCHIVED_DB_NAME); LOGGER.info("Decompressing the tar file..."); // Transfer bytes from the compressed file to the output file byte[] buffer = new byte[1024]; int len; while ((len = bz2.read(buffer)) > 0) { out.write(buffer, 0, len); } // Close the file and stream bz2.close(); out.close(); } catch (FileNotFoundException e) { e.printStackTrace(); } catch (IOException ex) { ex.printStackTrace(); } try { TarInputStream tarInputStream = null; TarEntry tarEntry; tarInputStream = new TarInputStream(new ProgressMonitorInputStream( null, "Extracting " + ARCHIVED_DB_NAME, new FileInputStream(ARCHIVED_DB_NAME))); tarEntry = tarInputStream.getNextEntry(); byte[] buf1 = new byte[1024]; LOGGER.info("Extracting tar file"); while (tarEntry != null) { //For each entry to be extracted String entryName = currentPath + tarEntry.getName(); entryName = entryName.replace('/', File.separatorChar); entryName = entryName.replace('\\', File.separatorChar); LOGGER.info("Extracting entry: " + entryName); FileOutputStream fileOutputStream; File newFile = new File(entryName); if (tarEntry.isDirectory()) { if (!newFile.mkdirs()) { break; } tarEntry = tarInputStream.getNextEntry(); continue; } fileOutputStream = new FileOutputStream(entryName); int n; while ((n = tarInputStream.read(buf1, 0, 1024)) > -1) { fileOutputStream.write(buf1, 0, n); } fileOutputStream.close(); tarEntry = tarInputStream.getNextEntry(); } tarInputStream.close(); } catch (Exception e) { } currentPath += "db" + File.separator + DB_FILE_NAME; if (!currentPath.isEmpty()) { LOGGER.info("DB placed in : " + currentPath); } return currentPath; } This method gets invoked on the event dispatch thread (SwingUtilities.isEventDispatchThread() returns true) so the UI components should be updated. I haven't implemented this as an SwingWorker since I need to wait for the extraction anyways before I can proceed with the initialization of the program. This method get invoked before the main JFrame of the application is visible. I don't won't a solution based on SwingWorker + property changed listeners - I think that the ProgressMonitorInputStream is exactly what I need, but I guess I'm not doing something right. I'm using Sun JDK 1.6.18. Any help would be greatly appreciated.

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >