Search Results

Search found 2630 results on 106 pages for 'sergey p aka azure'.

Page 3/106 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Developing a Cost Model for Cloud Applications

  - by BuckWoody

  Note - please pay attention to the date of this post. As much as I attempt to make the information below accurate, the nature of distributed computing means that components, units and pricing will change over time. The definitive costs for Microsoft Windows Azure and SQL Azure are located here, and are more accurate than anything you will see in this post: http://www.microsoft.com/windowsazure/offers/  When writing software that is run on a Platform-as-a-Service (PaaS) offering like Windows Azure / SQL Azure, one of the questions you must answer is how much the system will cost. I will not discuss the comparisons between on-premise costs (which are nigh impossible to calculate accurately) versus cloud costs, but instead focus on creating a general model for estimating costs for a given application. You should be aware that there are (at this writing) two billing mechanisms for Windows and SQL Azure: “Pay-as-you-go” or consumption, and “Subscription” or commitment. Conceptually, you can consider the former a pay-as-you-go cell phone plan, where you pay by the unit used (at a slightly higher rate) and the latter as a standard cell phone plan where you commit to a contract and thus pay lower rates. In this post I’ll stick with the pay-as-you-go mechanism for simplicity, which should be the maximum cost you would pay. From there you may be able to get a lower cost if you use the other mechanism. In any case, the model you create should hold. Developing a good cost model is essential. As a developer or architect, you’ll most certainly be asked how much something will cost, and you need to have a reliable way to estimate that. Businesses and Organizations have been used to paying for servers, software licenses, and other infrastructure as an up-front cost, and power, people to the systems and so on as an ongoing (and sometimes not factored) cost. When presented with a new paradigm like distributed computing, they may not understand the true cost/value proposition, and that’s where the architect and developer can guide the conversation to make a choice based on features of the application versus the true costs. The two big buckets of use-types for these applications are customer-based and steady-state. In the customer-based use type, each successful use of the program results in a sale or income for your organization. Perhaps you’ve written an application that provides the spot-price of foo, and your customer pays for the use of that application. In that case, once you’ve estimated your cost for a successful traversal of the application, you can build that into the price you charge the user. It’s a standard restaurant model, where the price of the meal is determined by the cost of making it, plus any profit you can make. In the second use-type, the application will be used by a more-or-less constant number of processes or users and no direct revenue is attached to the system. A typical example is a customer-tracking system used by the employees within your company. In this case, the cost model is often created “in reverse” - meaning that you pilot the application, monitor the use (and costs) and that cost is held steady. This is where the comparison with an on-premise system becomes necessary, even though it is more difficult to estimate those on-premise true costs. For instance, do you know exactly how much cost the air conditioning is because you have a team of system administrators? This may sound trivial, but that, along with the insurance for the building, the wiring, and every other part of the system is in fact a cost to the business. There are three primary methods that I’ve been successful with in estimating the cost. None are perfect, all are demand-driven. The general process is to lay out a matrix of: components units cost per unit and then multiply that times the usage of the system, based on which components you use in the program. That sounds a bit simplistic, but using those metrics in a calculation becomes more detailed. In all of the methods that follow, you need to know your application. The components for a PaaS include computing instances, storage, transactions, bandwidth and in the case of SQL Azure, database size. In most cases, architects start with the first model and progress through the other methods to gain accuracy. Simple Estimation The simplest way to calculate costs is to architect the application (even UML or on-paper, no coding involved) and then estimate which of the components you’ll use, and how much of each will be used. Microsoft provides two tools to do this - one is a simple slider-application located here: http://www.microsoft.com/windowsazure/pricing-calculator/  The other is a tool you download to create an “Return on Investment” (ROI) spreadsheet, which has the advantage of leading you through various questions to estimate what you plan to use, located here: https://roianalyst.alinean.com/msft/AutoLogin.do?d=176318219048082115  You can also just create a spreadsheet yourself with a structure like this: Program Element Azure Component Unit of Measure Cost Per Unit Estimated Use of Component Total Cost Per Component Cumulative Cost               Of course, the consideration with this model is that it is difficult to predict a system that is not running or hasn’t even been developed. Which brings us to the next model type. Measure and Project A more accurate model is to actually write the code for the application, using the Software Development Kit (SDK) which can run entirely disconnected from Azure. The code should be instrumented to estimate the use of the application components, logging to a local file on the development system. A series of unit and integration tests should be run, which will create load on the test system. You can use standard development concepts to track this usage, and even use Windows Performance Monitor counters. The best place to start with this method is to use the Windows Azure Diagnostics subsystem in your code, which you can read more about here: http://blogs.msdn.com/b/sumitm/archive/2009/11/18/introducing-windows-azure-diagnostics.aspx This set of API’s greatly simplifies tracking the application, and in fact you can use this information for more than just a cost model. After you have the tracking logs, you can plug the numbers into ay of the tools above, which should give a representative cost or in some cases a unit cost. The consideration with this model is that the SDK fabric is not a one-to-one comparison with performance on the actual Windows Azure fabric. Those differences are usually smaller, but they do need to be considered. Also, you may not be able to accurately predict the load on the system, which might lead to an architectural change, which changes the model. This leads us to the next, most accurate method for a cost model. Sample and Estimate Using standard statistical and other predictive math, once the application is deployed you will get a bill each month from Microsoft for your Azure usage. The bill is quite detailed, and you can export the data from it to do analysis, and using methods like regression and so on project out into the future what the costs will be. I normally advise that the architect also extrapolate a unit cost from those metrics as well. This is the information that should be reported back to the executives that pay the bills: the past cost, future projected costs, and unit cost “per click” or “per transaction”, as your case warrants. The challenge here is in the model itself - statistical methods are not foolproof, and the larger the sample (in this case I recommend the entire population, not a smaller sample) is key. References and Tools Articles: http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/02/10/windows-azure-billing-overview.aspx http://technet.microsoft.com/en-us/magazine/gg213848.aspx http://blog.codingoutloud.com/2011/06/05/azure-faq-how-much-will-it-cost-me-to-run-my-application-on-windows-azure/ http://blogs.msdn.com/b/johnalioto/archive/2010/08/25/10054193.aspx http://geekswithblogs.net/iupdateable/archive/2010/02/08/qampa-how-can-i-calculate-the-tco-and-roi-when.aspx   Other Tools: http://cloud-assessment.com/ http://communities.quest.com/community/cloud_tools

  Read the article

• Slides and Links from SQL Azure session at BizSpark Azure Day in London

  - by Eric Nelson

  A big thanks to all who attended my two sessions on SQL Azure yesterday (29th March 2010). As promised, my slides and links from the session. SQL Azure Overview for Bizspark day View more presentations from Eric Nelson. Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure SQL Azure maximum database size rises from 10GB to 50GB in June TCO and ROI calculator for Windows Azure SQL Azure Migration Wizard

  Read the article

• Northwind now available on SQL Azure

  - by jamiet

  Two weeks ago I made available a copy of [AdventureWorks2012] on SQL Azure and published credentials so that anyone from the SQL community could connect up and experience SQL Azure, probably for the first time. One of the (somewhat) popular requests thereafter was to make the venerable Northwind database available too so I am pleased to say that as of right now, Northwind is up there too. You will notice immediately that all of the Northwind tables (and the stored procedures and views too) have been moved into a schema called [Northwind] – this was so that they could be easily differentiated from the existing [AdventureWorks2012] objects. I used an SQL Server Data Tools (SSDT) project to publish the schema and data up to this SQL Azure database; if you are at all interested in poking around that SSDT project then I have made it available on Codeplex for your convenience under the MS-PL license – go and get it from https://northwindssdt.codeplex.com/. Using SSDT proved particularly useful as it alerted me to some aspects of Northwind that were not compatible with SQL Azure, namely that five of the tables did not have clustered indexes: The beauty of using SSDT is that I am alerted to these issues before I even attempt a connection to SQL Azure. Pretty cool, no? Fixing this situation was of course very easy, I simply changed the following primary keys from being nonclustered to clustered: [PK_Region] [PK_CustomerDemographics] [PK_EmployeeTerritories] [PK_Territories] [PK_CustomerCustomerDemo]   If you want to connect up then here are the credentials that you will need: Server mhknbn2kdz.database.windows.net Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly You will need SQL Server Management Studio (SSMS) 2008R2 installed in order to connect or alternatively simply use this handy website: https://mhknbn2kdz.database.windows.net which provides a web interface to a SQL Azure server. Do remember that hosting this database is not free so if you find that you are making use of it please help to keep it available by visiting Paypal and donating any amount at all to [email protected]. To make this easy you can simply hit this link and the details will be completed for you – all you have to do is login and hit the “Send” button. If you are already a PayPal member then it should take you all of about 20 seconds! I hope this is useful to some of you folks out there. Don’t forget that we also have more data up there than in the conventional [AdventureWorks2012], read more at Big AdventureWorks2012. @Jamiet  AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• SQL Azure Reporting Limited CTP Arrived

  - by Shaun

  It’s about 3 months later when I registered the SQL Azure Reporting CTP on the Microsoft Connect after TechED 2010 China. Today when I checked my mailbox I found that the SQL Azure team had just accepted my request and sent the activation code over to me. So let’s have a look on the new SQL Azure Reporting.   Concept The SQL Azure Reporting provides cloud-based reporting as a service, built on SQL Server Reporting Services and SQL Azure technologies. Cloud-based reporting solutions such as SQL Azure Reporting provide many benefits, including rapid provisioning, cost-effective scalability, high availability, and reduced management overhead for report servers; and secure access, viewing, and management of reports. By using the SQL Azure Reporting service, we can do: Embed the Visual Studio Report Viewer ADO.NET Ajax control or Windows Form control to view the reports deployed on SQL Azure Reporting Service in our web or desktop application. Leverage the SQL Azure Reporting SOAP API to manage and retrieve the report content from any kinds of application. Use the SQL Azure Reporting Service Portal to navigate and view the reports deployed on the cloud. Since the SQL Azure Reporting was built based on the SQL Server 2008 R2 Reporting Service, we can use any tools we are familiar with, such as the SQL Server Integration Studio, Visual Studio Report Viewer. The SQL Azure Reporting Service runs as a remote SQL Server Reporting Service just on the cloud rather than on a server besides us.   Establish a New SQL Azure Reporting Let’s move to the windows azure deveploer portal and click the Reporting item from the left side navigation bar. If you don’t have the activation code you can click the Sign Up button to send a requirement to the Microsoft Connect. Since I already recieved the received code mail I clicked the Provision button. Then after agree the terms of the service I will select the subscription for where my SQL Azure Reporting CTP should be provisioned. In this case I selected my free Windows Azure Pass subscription. Then the final step, paste the activation code and enter the password of our SQL Azure Reporting Service. The user name of the SQL Azure Reporting will be generated by SQL Azure automatically. After a while the new SQL Azure Reporting Server will be shown on our developer portal. The Reporting Service URL and the user name will be shown as well. We can reset the password from the toolbar button.   Deploy Report to SQL Azure Reporting If you are familiar with SQL Server Reporting Service you will find this part will be very similar with what you know and what you did before. Firstly we open the SQL Server Business Intelligence Development Studio and create a new Report Server Project. Then we will create a shared data source where the report data will be retrieved from. This data source can be SQL Azure but we can use local SQL Server or other database if it opens the port up. In this case we use a SQL Azure database located in the same data center of our reporting service. In the Credentials tab page we entered the user name and password to this SQL Azure database. The SQL Azure Reporting CTP only available at the North US Data Center now so that the related SQL Server and hosted service might be better to select the same data center to avoid the external data transfer fee. Then we create a very simple report, just retrieve all records from a table named Members and have a table in the report to list them. In the data source selection step we choose the shared data source we created before, then enter the T-SQL to select all records from the Member table, then put all fields into the table columns. The report will be like this as following In order to deploy the report onto the SQL Azure Reporting Service we need to update the project property. Right click the project node from the solution explorer and select the property item. In the Target Server URL item we will specify the reporting server URL of our SQL Azure Reporting. We can go back to the developer portal and select the reporting node from the left side, then copy the Web Service URL and paste here. But notice that we need to append “/reportserver” after pasted. Then just click the Deploy menu item in the context menu of the project, the Visual Studio will compile the report and then upload to the reporting service accordingly. In this step we will be prompted to input the user name and password of our SQL Azure Reporting Service. We can get the user name from the developer portal, just next to the Web Service URL in the SQL Azure Reporting page. And the password is the one we specified when created the reporting service. After about one minute the report will be deployed succeed.   View the Report in Browser SQL Azure Reporting allows us to view the reports which deployed on the cloud from a standard browser. We copied the Web Service URL from the reporting service main page and appended “/reportserver” in HTTPS protocol then we will have the SQL Azure Reporting Service login page. After entered the user name and password of the SQL Azure Reporting Service we can see the directories and reports listed. Click the report will launch the Report Viewer to render the report.   View Report in a Web Role with the Report Viewer The ASP.NET and Windows Form Report Viewer works well with the SQL Azure Reporting Service as well. We can create a ASP.NET Web Role and added the Report Viewer control in the default page. What we need to change to the report viewer are Change the Processing Mode to Remote. Specify the Report Server URL under the Server Remote category to the URL of the SQL Azure Reporting Web Service URL with “/reportserver” appended. Specify the Report Path to the report which we want to display. The report name should NOT include the extension name. For example my report was in the SqlAzureReportingTest project and named MemberList.rdl then the report path should be /SqlAzureReportingTest/MemberList. And the next one is to specify the SQL Azure Reporting Credentials. We can use the following class to wrap the report server credential. 1: private class ReportServerCredentials : IReportServerCredentials 2: { 3: private string _userName; 4: private string _password; 5: private string _domain; 6:  7: public ReportServerCredentials(string userName, string password, string domain) 8: { 9: _userName = userName; 10: _password = password; 11: _domain = domain; 12: } 13:  14: public WindowsIdentity ImpersonationUser 15: { 16: get 17: { 18: return null; 19: } 20: } 21:  22: public ICredentials NetworkCredentials 23: { 24: get 25: { 26: return null; 27: } 28: } 29:  30: public bool GetFormsCredentials(out Cookie authCookie, out string user, out string password, out string authority) 31: { 32: authCookie = null; 33: user = _userName; 34: password = _password; 35: authority = _domain; 36: return true; 37: } 38: } And then in the Page_Load method, pass it to the report viewer. 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: ReportViewer1.ServerReport.ReportServerCredentials = new ReportServerCredentials( 4: "<user name>", 5: "<password>", 6: "<sql azure reporting web service url>"); 7: } Finally deploy it to Windows Azure and enjoy the report.   Summary In this post I introduced the SQL Azure Reporting CTP which had just available. Likes other features in Windows Azure, the SQL Azure Reporting is very similar with the SQL Server Reporting. As you can see in this post we can use the existing and familiar tools to build and deploy the reports and display them on a website. But the SQL Azure Reporting is just in the CTP stage which means It is free. There’s no support for it. Only available at the North US Data Center. You can get more information about the SQL Azure Reporting CTP from the links following SQL Azure Reporting Limited CTP at MSDN SQL Azure Reporting Samples at TechNet Wiki You can download the solutions and the projects used in this post here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Windows Azure: Announcing Support for Windows Server 2012 R2 + Some Nice Price Cuts

  - by ScottGu

  Today we released some great updates to Windows Azure: Virtual Machines: Support for Windows Server 2012 R2 Cloud Services: Support for Windows Server 2012 R2 and .NET 4.5.1 Windows Azure Pack: Use Windows Azure features on-premises using Windows Server 2012 R2 Price Cuts: Up to 22% Price Reduction on Memory-Intensive Instances Below are more details about each of the improvements: Virtual Machines: Support for Windows Server 2012 R2 This morning we announced the release of Windows Server 2012 R2 – which is a fantastic update to Windows Server and includes a ton of great enhancements. This morning we are also excited to announce that the general availability image of Windows Server 2012 RC is now supported on Windows Azure.  Windows Azure is the first cloud provider to offer the final release of Windows Server 2012 R2, and it is incredibly easy to launch your own Windows Server 2012 R2 instance with it. To create a new Windows Server 2012 R2 instance simply choose New->Compute->Virtual Machine within the Windows Azure Management Portal.  You can select the “Windows Server 2012 R2” image and create a new Virtual Machine using the “Quick Create” option: Or alternatively click the “From Gallery” option if you want to customize even more configuration options (endpoints, remote powershell, availability set, etc): Creating and instantiating a new Virtual Machine on Windows Azure is very fast.  In fact, the Windows Server 2012 R2 image now deploys and runs 30% faster than previous versions of Windows Server. Once the VM is deployed you can drill into it to track its health and manage its settings: Clicking the “Connect” button allows you to remote desktop into the VM – at which point you can customize and manage it as a full administrator however you want: If you haven’t tried Windows Server 2012 R2 yet – give it a try with Windows Azure.  There is no easier way to get an instance of it up and running! Cloud Services: Support for using Windows Server 2012 R2 with Web and Worker Roles Today’s Windows Azure release also allows you to now use Windows Server 2012 R2 and .NET 4.5.1 within Web and Worker Roles within Cloud Service based applications.  Enabling this is easy.  You can configure existing existing Cloud Service application to use Windows Server 2012 R2 by updating your Cloud Service Configuration File (.cscfg) to use the new “OS Family 4” setting: Or alternatively you can use the Windows Azure Management Portal to update cloud services that are already deployed on Windows Azure.  Simply choose the configure tab on them and select Windows Server 2012 R2 in the Operating System Family dropdown: The approaches above enable you to immediately take advantage of Windows Server 2012 R2 and .NET 4.5.1 and all the great features they provide. Windows Azure Pack: Use Windows Azure features on Windows Server 2012 R2 Today we also made generally available the Windows Azure Pack, which is a free download that enables you to run Windows Azure Technology within your own datacenter, an on-premises private cloud environment, or with one of our service provider/hosting partners who run Windows Server. Windows Azure Pack enables you to use a management portal that has the exact same UI as the Windows Azure Management Portal, and within which you can create and manage Virtual Machines, Web Sites, and Service Bus – all of which can run on Windows Server and System Center.  The services provided with the Windows Azure Pack are consistent with the services offered within our Windows Azure public cloud offering.  This consistency enables organizations and developers to build applications and solutions that can run in any hosting environment – and which use the same development and management approach.  The end result is an offering with incredible flexibility. You can learn more about Windows Azure Pack and download/deploy it today here. Price Cuts: Up to 22% Reduction on Memory Intensive Instances Today we are also reducing prices by up to 22% on our memory-intensive VM instances (specifically our A5, A6, and A7 instances).  These price reductions apply to both Windows and Linux VM instances, as well as for Cloud Service based applications: These price reductions will take effect in November, and will enable you to run applications that demand larger memory (such as SharePoint, Databases, in-memory analytics, etc) even more cost effectively. Summary Today’s release enables you to start using Windows Server 2012 R2 within Windows Azure immediately, and take advantage of our Cloud OS vision both within our datacenters – and using the Windows Azure Pack within both your existing datacenters and those of our partners. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Windows Azure Myths

  - by BuckWoody

  Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

  Read the article

• Windows Azure Myths

  - by BuckWoody

  Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

  Read the article

• Cloud-Burst 2012&ndash;Windows Azure Developer Conference in Sweden

  - by Alan Smith

  The Sweden Windows Azure Group (SWAG) will running “Cloud-Burst 2012”, a two-day Windows Azure conference hosted at the Microsoft offices in Akalla, near Stockholm on the 27th and 28th September, with an Azure Hands-on Labs Day at AddSkills on the 29th September. The event is free to attend, and will be featuring presentations on the latest Azure technologies from Microsoft MVPs and evangelists. The following presentations will be delivered on the Thursday (27th) and Friday (29th): · Connecting Devices to Windows Azure - Windows Azure Technical Evangelist Brady Gaster · Grid Computing with 256 Windows Azure Worker Roles - Connected System Developer MVP Alan Smith · ‘Warts and all’. The truth about Windows Azure development - BizTalk MVP Charles Young · Using Azure to Integrate Applications - BizTalk MVP Charles Young · Riding the Windows Azure Service Bus: Cross-‘Anything’ Messaging - Windows Azure MVP & Regional Director Christian Weyer · Windows Azure, Identity & Access - and you - Developer Security MVP Dominick Baier · Brewing Beer with Windows Azure - Windows Azure MVP Maarten Balliauw · Architectural patterns for the cloud - Windows Azure MVP Maarten Balliauw · Windows Azure Web Sites and the Power of Continuous Delivery - Windows Azure MVP Magnus Mårtensson · Advanced SQL Azure - Analyze and Optimize Performance - Windows Azure MVP Nuno Godinho · Architect your SQL Azure Databases - Windows Azure MVP Nuno Godinho   There will be a chance to get your hands on the latest Azure bits and an Azure trial account at the Hands-on Labs Day on Saturday (29th) with Brady Gaster, Magnus Mårtensson and Alan Smith there to provide guidance, and some informal and entertaining presentations. Attendance for the conference and Hands-on Labs Day is free, but please only register if you can make it, (and cancel if you cannot). Cloud-Burst 2012 event details and registration is here: http://www.azureug.se/CloudBurst2012/ Registration for Sweden Windows Azure Group Stockholm is here: swagmembership.eventbrite.com The event has been made possible by kind contributions from our sponsors, Knowit, AddSkills and Microsoft Sweden.

  Read the article

• jQuery and Windows Azure

  - by Stephen Walther

  The goal of this blog entry is to describe how you can host a simple Ajax application created with jQuery in the Windows Azure cloud. In this blog entry, I make no assumptions. I assume that you have never used Windows Azure and I am going to walk through the steps required to host the application in the cloud in agonizing detail. Our application will consist of a single HTML page and a single service. The HTML page will contain jQuery code that invokes the service to retrieve and display set of records. There are five steps that you must complete to host the jQuery application: Sign up for Windows Azure Create a Hosted Service Install the Windows Azure Tools for Visual Studio Create a Windows Azure Cloud Service Deploy the Cloud Service Sign Up for Windows Azure Go to http://www.microsoft.com/windowsazure/ and click the Sign up Now button. Select one of the offers. I selected the Introductory Special offer because it is free and I just wanted to experiment with Windows Azure for the purposes of this blog entry.     To sign up, you will need a Windows Live ID and you will need to enter a credit card number. After you finish the sign up process, you will receive an email that explains how to activate your account. Accessing the Developer Portal After you create your account and your account is activated, you can access the Windows Azure developer portal by visiting the following URL: http://windows.azure.com/ When you first visit the developer portal, you will see the one project that you created when you set up your Windows Azure account (In a fit of creativity, I named my project StephenWalther).     Creating a New Windows Azure Hosted Service Before you can host an application in the cloud, you must first add a hosted service to your project. Click your project on the summary page and click the New Service link. You are presented with the option of creating either a new Storage Account or a new Hosted Services.     Because we have code that we want to run in the cloud – the WCF Service -- we want to select the Hosted Services option. After you select this option, you must provide a name and description for your service. This information is used on the developer portal so you can distinguish your services.     When you create a new hosted service, you must enter a unique name for your service (I selected jQueryApp) and you must select a region for this service (I selected Anywhere US). Click the Create button to create the new hosted service.   Install the Windows Azure Tools for Visual Studio We’ll use Visual Studio to create our jQuery project. Before you can use Visual Studio with Windows Azure, you must first install the Windows Azure Tools for Visual Studio. Go to http://www.microsoft.com/windowsazure/ and click the Get Tools and SDK button. The Windows Azure Tools for Visual Studio works with both Visual Studio 2008 and Visual Studio 2010.   Installation of the Windows Azure Tools for Visual Studio is painless. You just need to check some agreement checkboxes and click the Next button a few times and installation will begin:   Creating a Windows Azure Application After you install the Windows Azure Tools for Visual Studio, you can choose to create a Windows Azure Cloud Service by selecting the menu option File, New Project and selecting the Windows Azure Cloud Service project template. I named my new Cloud Service with the name jQueryApp.     Next, you need to select the type of Cloud Service project that you want to create from the New Cloud Service Project dialog.   I selected the C# ASP.NET Web Role option. Alternatively, I could have picked the ASP.NET MVC 2 Web Role option if I wanted to use jQuery with ASP.NET MVC or even the CGI Web Role option if I wanted to use jQuery with PHP. After you complete these steps, you end up with two projects in your Visual Studio solution. The project named WebRole1 represents your ASP.NET application and we will use this project to create our jQuery application. Creating the jQuery Application in the Cloud We are now ready to create the jQuery application. We’ll create a super simple application that displays a list of records retrieved from a WCF service (hosted in the cloud). Create a new page in the WebRole1 project named Default.htm and add the following code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> var products = [ {name:"Milk", price:4.55}, {name:"Yogurt", price:2.99}, {name:"Steak", price:23.44} ]; $("#productTemplate").render(products).appendTo("#productContainer"); </script> </body> </html> The jQuery code in this page simply displays a list of products by using a template. I am using a jQuery template to format each product. You can learn more about using jQuery templates by reading the following blog entry by Scott Guthrie: http://weblogs.asp.net/scottgu/archive/2010/05/07/jquery-templates-and-data-linking-and-microsoft-contributing-to-jquery.aspx You can test whether the Default.htm page is working correctly by running your application (hit the F5 key). The first time that you run your application, a database is set up on your local machine to simulate cloud storage. You will see the following dialog: If the Default.htm page works as expected, you should see the list of three products: Adding an Ajax-Enabled WCF Service In the previous section, we created a simple jQuery application that displays an array by using a template. The application is a little too simple because the data is static. In this section, we’ll modify the page so that the data is retrieved from a WCF service instead of an array. First, we need to add a new Ajax-enabled WCF Service to the WebRole1 project. Select the menu option Project, Add New Item and select the Ajax-enabled WCF Service project item. Name the new service ProductService.svc. Modify the service so that it returns a static collection of products. The final code for the ProductService.svc should look like this: using System.Collections.Generic; using System.ServiceModel; using System.ServiceModel.Activation; namespace WebRole1 { public class Product { public string name { get; set; } public decimal price { get; set; } } [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class ProductService { [OperationContract] public IList<Product> SelectProducts() { var products = new List<Product>(); products.Add(new Product {name="Milk", price=4.55m} ); products.Add(new Product { name = "Yogurt", price = 2.99m }); products.Add(new Product { name = "Steak", price = 23.44m }); return products; } } }   In real life, you would want to retrieve the list of products from storage instead of a static array. We are being lazy here. Next you need to modify the Default.htm page to use the ProductService.svc. The jQuery script in the following updated Default.htm page makes an Ajax call to the WCF service. The data retrieved from the ProductService.svc is displayed in the client template. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> $.post("ProductService.svc/SelectProducts", function (results) { var products = results["d"]; $("#productTemplate").render(products).appendTo("#productContainer"); }); </script> </body> </html>   Deploying the jQuery Application to the Cloud Now that we have created our jQuery application, we are ready to deploy our application to the cloud so that the whole world can use it. Right-click your jQueryApp project in the Solution Explorer window and select the Publish menu option. When you select publish, your application and your application configuration information is packaged up into two files named jQueryApp.cspkg and ServiceConfiguration.cscfg. Visual Studio opens the directory that contains the two files. In order to deploy these files to the Windows Azure cloud, you must upload these files yourself. Return to the Windows Azure Developers Portal at the following address: http://windows.azure.com/ Select your project and select the jQueryApp service. You will see a mysterious cube. Click the Deploy button to upload your application.   Next, you need to browse to the location on your hard drive where the jQueryApp project was published and select both the packaged application and the packaged application configuration file. Supply the deployment with a name and click the Deploy button.     While your application is in the process of being deployed, you can view a progress bar.     Running the jQuery Application in the Cloud Finally, you can run your jQuery application in the cloud by clicking the Run button.   It might take several minutes for your application to initialize (go grab a coffee). After WebRole1 finishes initializing, you can navigate to the following URL to view your live jQuery application in the cloud: http://jqueryapp.cloudapp.net/default.htm The page is hosted on the Windows Azure cloud and the WCF service executes every time that you request the page to retrieve the list of products. Summary Because we started from scratch, we needed to complete several steps to create and deploy our jQuery application to the Windows Azure cloud. We needed to create a Windows Azure account, create a hosted service, install the Windows Azure Tools for Visual Studio, create the jQuery application, and deploy it to the cloud. Now that we have finished this process once, modifying our existing cloud application or creating a new cloud application is easy. jQuery and Windows Azure work nicely together. We can take advantage of jQuery to build applications that run in the browser and we can take advantage of Windows Azure to host the backend services required by our jQuery application. The big benefit of Windows Azure is that it enables us to scale. If, all of the sudden, our jQuery application explodes in popularity, Windows Azure enables us to easily scale up to meet the demand. We can handle anything that the Internet might throw at us.

  Read the article

• Identity alternative for SQL Azure Federation : are Azure Queues or Service Bus Queues a good choice?

  - by JYL

  As many of developers, I'm looking for a way to integrate my existing app to SQL Azure Federations, and replacing the Identity columns (the primary keys of my tables) is a big problem. For many reasons, I do NOT want use GUID for my primary keys (please don't open the debate about the GUID or not, it's not my question : i just don't want a GUID, period). So I need to build a key provider to replace the "identity" feature of a standard SQL database. I'm using Entity Framework, so i can easily find one place to set the Id value just before the insert (by overriding the SaveChanges method of my ObjectContext class). I just need to find a "not too complicated" implementation for getting the current Id, which is "farm-ready". I've read this SO post : "ID Generation for Sharded Database (Azure Federated Database)" and "Synchronizing Multiple Nodes in Windows Azure from MSDN Magazine", but this solution sounds a bit complicated for me. I'm thinking about creating (automatically) one azure queue for each SQL table, which contain a pre-loaded list of consecutive integer. When I want an Id value, I just have to get a message from the queue (which becomes invisible and is deleted on the way), which give me the current available Id. About the choice between "Windows Azure Queues" and "Windows Azure Service Bus Queues", I prefere "Windows Azure Queues", due to the "high" latency of Service Bus Queues. I don't think that the lack of "ordering garantee" of Azure Queues is a problem. What do you think about that idea of using Azure Queues to provide Id values ? Do you see any argument to give up that idea ? Do you have a better idea, or even a good practice, to provider integer ids in SQL Azure Federation databases ? Thanks.

  Read the article

• The Proper Use of the VM Role in Windows Azure

  - by BuckWoody

  At the Professional Developer’s Conference (PDC) in 2010 we announced an addition to the Computational Roles in Windows Azure, called the VM Role. This new feature allows a great deal of control over the applications you write, but some have confused it with our full infrastructure offering in Windows Hyper-V. There is a proper architecture pattern for both of them. Virtualization Virtualization is the process of taking all of the hardware of a physical computer and replicating it in software alone. This means that a single computer can “host” or run several “virtual” computers. These virtual computers can run anywhere - including at a vendor’s location. Some companies refer to this as Cloud Computing since the hardware is operated and maintained elsewhere. IaaS The more detailed definition of this type of computing is called Infrastructure as a Service (Iaas) since it removes the need for you to maintain hardware at your organization. The operating system, drivers, and all the other software required to run an application are still under your control and your responsibility to license, patch, and scale. Microsoft has an offering in this space called Hyper-V, that runs on the Windows operating system. Combined with a hardware hosting vendor and the System Center software to create and deploy Virtual Machines (a process referred to as provisioning), you can create a Cloud environment with full control over all aspects of the machine, including multiple operating systems if you like. Hosting machines and provisioning them at your own buildings is sometimes called a Private Cloud, and hosting them somewhere else is often called a Public Cloud. State-ful and Stateless Programming This paradigm does not create a new, scalable way of computing. It simply moves the hardware away. The reason is that when you limit the Cloud efforts to a Virtual Machine, you are in effect limiting the computing resources to what that single system can provide. This is because much of the software developed in this environment maintains “state” - and that requires a little explanation. “State-ful programming” means that all parts of the computing environment stay connected to each other throughout a compute cycle. The system expects the memory, CPU, storage and network to remain in the same state from the beginning of the process to the end. You can think of this as a telephone conversation - you expect that the other person picks up the phone, listens to you, and talks back all in a single unit of time. In “Stateless” computing the system is designed to allow the different parts of the code to run independently of each other. You can think of this like an e-mail exchange. You compose an e-mail from your system (it has the state when you’re doing that) and then you walk away for a bit to make some coffee. A few minutes later you click the “send” button (the network has the state) and you go to a meeting. The server receives the message and stores it on a mail program’s database (the mail server has the state now) and continues working on other mail. Finally, the other party logs on to their mail client and reads the mail (the other user has the state) and responds to it and so on. These events might be separated by milliseconds or even days, but the system continues to operate. The entire process doesn’t maintain the state, each component does. This is the exact concept behind coding for Windows Azure. The stateless programming model allows amazing rates of scale, since the message (think of the e-mail) can be broken apart by multiple programs and worked on in parallel (like when the e-mail goes to hundreds of users), and only the order of re-assembling the work is important to consider. For the exact same reason, if the system makes copies of those running programs as Windows Azure does, you have built-in redundancy and recovery. It’s just built into the design. The Difference Between Infrastructure Designs and Platform Designs When you simply take a physical server running software and virtualize it either privately or publicly, you haven’t done anything to allow the code to scale or have recovery. That all has to be handled by adding more code and more Virtual Machines that have a slight lag in maintaining the running state of the system. Add more machines and you get more lag, so the scale is limited. This is the primary limitation with IaaS. It’s also not as easy to deploy these VM’s, and more importantly, you’re often charged on a longer basis to remove them. your agility in IaaS is more limited. Windows Azure is a Platform - meaning that you get objects you can code against. The code you write runs on multiple nodes with multiple copies, and it all works because of the magic of Stateless programming. you don’t worry, or even care, about what is running underneath. It could be Windows (and it is in fact a type of Windows Server), Linux, or anything else - but that' isn’t what you want to manage, monitor, maintain or license. You don’t want to deploy an operating system - you want to deploy an application. You want your code to run, and you don’t care how it does that. Another benefit to PaaS is that you can ask for hundreds or thousands of new nodes of computing power - there’s no provisioning, it just happens. And you can stop using them quicker - and the base code for your application does not have to change to make this happen. Windows Azure Roles and Their Use If you need your code to have a user interface, in Visual Studio you add a Web Role to your project, and if the code needs to do work that doesn’t involve a user interface you can add a Worker Role. They are just containers that act a certain way. I’ll provide more detail on those later. Note: That’s a general description, so it’s not entirely accurate, but it’s accurate enough for this discussion. So now we’re back to that VM Role. Because of the name, some have mistakenly thought that you can take a Virtual Machine running, say Linux, and deploy it to Windows Azure using this Role. But you can’t. That’s not what it is designed for at all. If you do need that kind of deployment, you should look into Hyper-V and System Center to create the Private or Public Infrastructure as a Service. What the VM Role is actually designed to do is to allow you to have a great deal of control over the system where your code will run. Let’s take an example. You’ve heard about Windows Azure, and Platform programming. You’re convinced it’s the right way to code. But you have a lot of things you’ve written in another way at your company. Re-writing all of your code to take advantage of Windows Azure will take a long time. Or perhaps you have a certain version of Apache Web Server that you need for your code to work. In both cases, you think you can (or already have) code the the software to be “Stateless”, you just need more control over the place where the code runs. That’s the place where a VM Role makes sense. Recap Virtualizing servers alone has limitations of scale, availability and recovery. Microsoft’s offering in this area is Hyper-V and System Center, not the VM Role. The VM Role is still used for running Stateless code, just like the Web and Worker Roles, with the exception that it allows you more control over the environment of where that code runs.

  Read the article

• How to setup users for desktop app with SQL Azure as backend?

  - by Manuel

  I'm considering SQL Azure as DB for a new application I'm developing. The reason I want to go with Azure is because I don't want to have to maintain yet another database(s) and I want my users to be able to access the data from anywhere. The problem is that I'm not clear regarding how to users will connect. The application is a basic CRUD type of windows app. I've read that you need to add your IP to SQL Azure's firewall to connect to it, but I don't know if it's only for administration purposes only. Can anyone clarify if anyone (anywhere) can access the data with the proper credentials? Which of the following scenarios would work best (if at all)? A) Add each user to SQL Azure and have the app connect directly to Azure as if it was connecting to SQL Server B) Add an anonymous user SQL Azure and pass the real user's password/hash with every call so the Azure database can service the requests accordingly. C) Put a WCF service in between so that it handles the authentication stuff. The service will only serve the appropriate information to the user given his/her authentication and SQL Azure would be open to the service exclusively. D) - ideas are welcomed - This is confusing because all Azure examples I see are for websites. I have a hard time believing SQL Azure wouldn't handle the case of desktop apps connecting to it. So what's the best practice?

  Read the article

• Clone an Azure VM using Powershell

  - by jamiet

  In a few months time I will, in association with Technitrain, be running a training course entitled Introduction to SQL Server Data Tools. I am currently working on putting together some hands-on lab material for the course delegates and have decided that in order to save time in asking people to install software during the course I am simply going to prepare a virtual machine (VM) containing all the software and lab material for each delegate to use. Given that I am an MSDN subscriber it makes sense to use Windows Azure to host those VMs given that it will be close to, if not completely, free to do so. What I don’t want to do however is separately build a VM for each delegate, I would much rather build one VM and clone it for each delegate. I’ve spent a bit of time figuring out how to do this using Powershell and in this blog post I am sharing a script that will: Prompt for some information (Azure credentials, Azure subscription name, VM name, username & password, etc…) Create a VM on Azure using that information Prompt you to sysprep the VM and image it (this part can’t be done with Powershell so has to be done manually, a link to instructions is provided in the script output) Create three new VMs based on the image Remove those three VMs Simply download the script and execute it within Powershell, assuming you have an Azure account it should take about 20minutes to execute (spinning up VMs and shutting the down isn’t instantaneous). If you experience any issues please do let me know. There are additional notes below. Hope this is useful! @Jamiet  Notes: Obviously there isn’t a lot of point in creating some new VMs and then instantly deleting them. However, this demo script does provide everything you need should you want to do any of these operations in isolation. The names of the three VMs that get created will be suffixed with 001, 002, 003 but you can edit the script to call them whatever you like. The script doesn’t totally clean up after itself. If you specify a service name & storage account name that don’t already exist then it will create them however it won’t remove them when everything is complete. The created image file will also not be deleted. Removing these items can be done by visiting http://manage.windowsazure.com. When creating the image, ensure you use the correct name (the script output tells you what name to use): Here are some screenshots taken from running the script: When the third and final VM gets removed you are asked to confirm via this dialog: Select ‘Yes’

  Read the article

• PowerShell Script to Deploy Multiple VM on Azure in Parallel #azure #powershell

  - by Marco Russo (SQLBI)

  This blog is usually dedicated to Business Intelligence and SQL Server, but I didn’t found easily on the web simple PowerShell scripts to help me deploying a number of virtual machines on Azure that I use for testing and development. Since I need to deploy, start, stop and remove many virtual machines created from a common image I created (you know, Tabular is not part of the standard images provided by Microsoft…), I wanted to minimize the time required to execute every operation from my Windows Azure PowerShell console (but I suggest you using Windows PowerShell ISE), so I also wanted to fire the commands as soon as possible in parallel, without losing the result in the console. In order to execute multiple commands in parallel, I used the Start-Job cmdlet, and using Get-Job and Receive-Job I wait for job completion and display the messages generated during background command execution. This technique allows me to reduce execution time when I have to deploy, start, stop or remove virtual machines. Please note that a few operations on Azure acquire an exclusive lock and cannot be really executed in parallel, but only one part of their execution time is subject to this lock. Thus, you obtain a better response time also in these scenarios (this is the case of the provisioning of a new VM). Finally, when you remove the VMs you still have the disk containing the virtual machine to remove. This cannot be done just after the VM removal, because you have to wait that the removal operation is completed on Azure. So I wrote a script that you have to run a few minutes after VMs removal and delete disks (and VHD) no longer related to a VM. I just check that the disk were associated to the original image name used to provision the VMs (so I don’t remove other disks deployed by other batches that I might want to preserve). These examples are specific for my scenario, if you need more complex configurations you have to change and adapt the code. But if your need is to create multiple instances of the same VM running in a workgroup, these scripts should be good enough. I prepared the following PowerShell scripts: ProvisionVMs: Provision many VMs in parallel starting from the same image. It creates one service for each VM. RemoveVMs: Remove all the VMs in parallel – it also remove the service created for the VM StartVMs: Starts all the VMs in parallel StopVMs: Stops all the VMs in parallel RemoveOrphanDisks: Remove all the disks no longer used by any VMs. Run this script a few minutes after RemoveVMs script. ProvisionVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   # Name of storage account (where VMs will be deployed) $StorageAccount = "Copy the Label property you get from Get-AzureStorageAccount"   function ProvisionVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName) $Location = "Copy the Location property you get from Get-AzureStorageAccount" $InstanceSize = "A5" # You can use any other instance, such as Large, A6, and so on $AdminUsername = "UserName" # Write the name of the administrator account in the new VM $Password = "Password"      # Write the password of the administrator account in the new VM $Image = "Copy the ImageName property you get from Get-AzureVMImage" # You can list your own images using the following command: # Get-AzureVMImage | Where-Object {$_.PublisherName -eq "User" }         New-AzureVMConfig -Name $VmName -ImageName $Image -InstanceSize $InstanceSize |             Add-AzureProvisioningConfig -Windows -Password $Password -AdminUsername $AdminUsername|             New-AzureVM -Location $Location -ServiceName "$VmName" -Verbose     } }   # Set the proper storage - you might remove this line if you have only one storage in the subscription Set-AzureSubscription -SubscriptionName $SubscriptionName -CurrentStorageAccount $StorageAccount   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list provisions one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed ProvisionVM "test10" ProvisionVM "test11" ProvisionVM "test12" ProvisionVM "test13" ProvisionVM "test14" ProvisionVM "test15" ProvisionVM "test16" ProvisionVM "test17" ProvisionVM "test18" ProvisionVM "test19" ProvisionVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup of jobs Remove-Job *   # Displays batch completed echo "Provisioning VM Completed" RemoveVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function RemoveVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Remove-AzureService -ServiceName $VmName -Force -Verbose     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list remove one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed RemoveVM "test10" RemoveVM "test11" RemoveVM "test12" RemoveVM "test13" RemoveVM "test14" RemoveVM "test15" RemoveVM "test16" RemoveVM "test17" RemoveVM "test18" RemoveVM "test19" RemoveVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Remove VM Completed" StartVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function StartVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Start-AzureVM -Name $VmName -ServiceName $VmName -Verbose     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list starts one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed StartVM "test10" StartVM "test11" StartVM "test11" StartVM "test12" StartVM "test13" StartVM "test14" StartVM "test15" StartVM "test16" StartVM "test17" StartVM "test18" StartVM "test19" StartVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Start VM Completed"   StopVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function StopVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Stop-AzureVM -Name $VmName -ServiceName $VmName -Verbose -Force     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list stops one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed StopVM "test10" StopVM "test11" StopVM "test12" StopVM "test13" StopVM "test14" StopVM "test15" StopVM "test16" StopVM "test17" StopVM "test18" StopVM "test19" StopVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Stop VM Completed" RemoveOrphanDisks $Image = "Copy the ImageName property you get from Get-AzureVMImage" # You can list your own images using the following command: # Get-AzureVMImage | Where-Object {$_.PublisherName -eq "User" }   # Remove all orphan disks coming from the image specified in $ImageName Get-AzureDisk |     Where-Object {$_.attachedto -eq $null -and $_.SourceImageName -eq $ImageName} |     Remove-AzureDisk -DeleteVHD -Verbose  

  Read the article

• ASP.NET Podcast Show #144 - Windows Azure Part II - Worker Roles

  - by Wallym

  Original Url: http://aspnetpodcast.com/CS11/blogs/asp.net_podcast/archive/2010/10/28/asp-net-podcast-show-144-windows-azure-part-ii-worker-roles.aspx This show is on Web & Worker Roles in Azure, Blob Storage, and the Visual Studio 2010 Azure tools. Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download MOV. Download M4V for iPhone/iPad. Download MP3.

  Read the article

• ASP.NET Podcast Show #143 - Windows Azure Part I - Web Roles

  - by Wallym

  Original Url: http://aspnetpodcast.com/CS11/blogs/asp.net_podcast/archive/2010/10/25/asp-net-podcast-show-143-windows-azure-part-i-web-roles.aspx (forgot to post this here)This show is on Web Roles in Azure, Blob Storage, and the Visual Studio 2010 Azure tools. Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download MOV. Download M4V for iPhone/iPad. Download MP3.

  Read the article

• Windows Azure Learning Plan - Compute

  - by BuckWoody

  This is one in a series of posts on a Windows Azure Learning Plan. You can find the main post here. This one deals with the "compute" function of Windows Azure, which includes Configuration Files, the Web Role, the Worker Role, and the VM Role. There is a general programming guide for Windows Azure that you can find here to help with the overall process.   Configuration Files Configuration Files define the environment for a Windows Azure application, similar to an ASP.NET application. This section explains how to work with these. General Introduction and Overview http://blogs.itmentors.com/bill/2009/11/04/configuration-files-and-windows-azure/ Service Definition File Schema http://msdn.microsoft.com/en-us/library/ee758711.aspx Service Configuration File Schema http://msdn.microsoft.com/en-us/library/ee758710.aspx  Windows Azure Web Role The Web Role runs code (such as ASP pages) that require a User Interface. Web Role "Boot Camp" Video  https://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?culture=en-US&EventID=1032470854&CountryCode=US Web Role Deployment Checklist http://blogs.infragistics.com/blogs/anton_staykov/archive/2010/06/30/windows-azure-web-role-deployment-checklist.aspx  Using a Web Role as a Worker Role for Small Applications http://www.31a2ba2a-b718-11dc-8314-0800200c9a66.com/2010/12/how-to-combine-worker-and-web-role-in.html Windows Azure Worker Role  The Worker Role is used for code that does not require a direct User Interface. Worker Role "Boot Camp" Video https://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?culture=en-US&EventID=1032470871&CountryCode=US Worker Role versus Web Roles http://msdn.microsoft.com/en-us/library/gg433012.aspx Deploying other applications (like Java) in a Windows Azure Worker Role http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx Windows Azure VM Role The Windows Azure VM Role is an Operating System-level mechanism for code deployment. VM Role Overview and Details  http://msdn.microsoft.com/en-us/library/gg465398.aspx  The proper use of the VM Role http://blogs.msdn.com/b/buckwoody/archive/2010/12/28/the-proper-use-of-the-vm-role-in-windows-azure.aspx

  Read the article

• Olympics data available for all on Windows Azure SQL Database and Power View

  - by jamiet

  Are you looking around for some decent test data for your BI demos? Well, if so, Microsoft have provided some data about all medals won at the Olympics Games (1900 to 2008) at OlympicsData workbook - Excel, SSIS, Azure sample; it provides analysis over athletes, countries, medal type, sport, discipline and various other dimensions. The data has been provided in an Excel workbook along with instructions on how to load the data into a Windows Azure SQL Database using SQL Server Integration Services (SSIS). Frankly though, the rigmarole of standing up your own Windows Azure SQL Database ok, SQL Azure database, is both costly (SQL Azure isn’t free) and time consuming (the provided instructions aren’t exactly an idiot’s guide and getting SSIS to work properly with Excel isn’t a barrel of laughs either). To ease the pain for all you BI folks out there that simply want to party on the data I have loaded it all into the SQL Azure database that I use for hosting AdventureWorks on Azure. You can read more about AdventureWorks on Azure below however I’ll summarise here by saying it is a SQL Azure database provided for the use of the SQL Server community and which is supported by voluntary donations. To view the data the credentials you need are: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly Type those into SSMS and away you go, the data is provided in four tables [olympics].[Sport], [olympics].[Discipline], [olympics].[Event] & [olympics].[Medalist]: I figured this would be a good candidate for a Power View report so I fired up Excel 2013 and built such a report to slice’n’dice through the data – here are some screenshots that should give you a flavour of what is available: A view of all the available data Where do all the gymastics medals go? Which countries do top ten all-time medal winners come from? You get the idea. There is masses of information here and if you have Excel 2013 handy Power View provides a quick and easy way of surfing through it. To save you the bother of setting up the Power View report yourself you can have the one that I took these screenshots from, it is available on my SkyDrive at OlympicsAnalysis.xlsx so just hit the link and download to play to your heart’s content. Party on, people! As I said above the data is hosted on a SQL Azure database that I use for hosting “AdventureWorks on Azure” which I first announced in March 2013 at AdventureWorks2012 now available for all on SQL Azure. I’ll repeat the pertinent parts of that blog post here: I am pleased to announce that as of today … [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use for their own means. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected] Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more than we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. I’d like to emphasize that last point. If my hosting this Olympics data is useful to you please support this initiative by donating. Thanks in advance. @Jamiet

  Read the article

• Azure - Unable To Get SQL Azure Invitation Code!

  - by Goober

  Scenario I'm trying to convert my Silverlight Business Application over to the cloud with the help of Azure. I have been following this link from Brad Abrams blog. Both the links to Windows Azure and SQL Azure crash out in Google Chrome, they work in Internet Explorer, but it's literally one of the worst user experiences I've ever had. The Problem I'm asked to sign in to Microsoft connect with my Live ID. I do so, I'm then asked to register!? - I do so. I'm then sent a verification email which I verify. I'm then signed out!?!?! When I sign back in, it repeats the process.... ANY IDEAS!??! Edit/Update: Finally managed to get signed up/in to connect. From here I was able to get hold of an invitation code to Windows Azure. Now I need an invitation code for SQL Azure. I cannot see ANYWHERE that advertises a way of getting this SQL Azure code, the only thing that I have seen is some text saying that there "may be a delay" in receiving codes due to volume of interest, which quite frankly I find hard to believe......... It's so far been 3 days now.This officially Sucks! If I have any more news I'll post back here.

  Read the article

• How to create a virtual network with Azure Connect

  - by Herve Roggero

  If you are trying to establish a virtual network between machines located in disparate networks, you can either use VPN, Virtual Network or Azure Connect. If you want to establish a connection between machines located in Windows Azure, you should consider using the Virtual Network service. If you want to establish a connection between local machines and Virtual Machines in Windows Azure, you may be able to use your existing VPN device (assuming you have one), as long as the device is supported by Microsoft. If the VPN device you are using isn’t supported, or if you are trying to create a virtual network between machines from disparate networks (such as machines located in another cloud provider), you can use Azure Connect. This blog post explains how Azure Connect can help you create virtual networks between multiple servers in the cloud, various servers in different cloud environments, and on-premise. Note: Azure Connect is currently in Technical Preview. About Azure Connect Let’s do a quick review of Azure Connect. This technology implements an IPSec tunnel from machines to to a relay service located in the Microsoft cloud (Azure). So in essence, Azure Connect doesn’t provide a point-to-point connection between machines; the network communication is tunneled through the relay service. The relay service in turn offers a mechanism to enforce basic communication rules that you define through Groups. We will review this later. You could network two or more VMs in the Azure cloud (although you should consider using a Virtual Network if you go this route), or servers in the Azure cloud and other machines in the Amazon cloud for example, or even two or more on-premise servers located in different locations for which a direct network connection is not an option. You can place any number of machines in your topology. Azure Connect gives you great flexibility on how you want to build your virtual network across various environments. So Azure Connect makes sense when you want to: Connect machines located in different cloud providers Connect on-premise machines running in different locations Connect Azure VMs with on-premise (if you do not have a VPN device, or if your device is not supported) Connect Azure Roles (Worker Roles, Web Roles) with on-premise servers or in other cloud providers The diagram below shows you a high level network topology that involves machines in the Windows Azure cloud, other cloud providers and on-premise. You should note that the only required component in this diagram is the Relay itself. The other machines are optional (although your network is useful only if you have two or more machines involved). Relay agents are currently available in three geographic areas: US, Europe and Asia. You can change which region you want to use in the Windows Azure management portal. High Level Network Topology With Azure Connect Azure Connect Agent Azure Connect establishes a virtual network and creates virtual adapters on your machines; these virtual adapters communicate through the Relay using IPSec. This is achieved by installing an agent (the Azure Connect Agent) on all the machines you want in your network topology. However, you do not need to install the agent on Worker Roles and Web Roles; that’s because the agent is already installed for you. Any other machine, including Virtual Machines in Windows Azure, needs the agent installed.  To install the agent, simply go to your Windows Azure portal (http://windows.azure.com) and click on Networks on the bottom left panel. You will see a list of subscriptions under Connect. If you select a subscription, you will be able to click on the Install Local Endpoint icon on top. Clicking on this icon will begin the download and installation process for the agent. Activating Roles for Azure Connect As previously mentioned, you do not need to install the Azure Connect Agent on Worker Roles and Web Roles because it is already loaded. However, you do need to activate them if you want the roles to participate in your network topology. To do this, you will need to click on the Get Activation Token icon. The activation token must then be copied and placed in the configuration file of your roles. For more information on how to perform this step, visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg432964.aspx. Firewall Rules Note that specific firewall rules must exist to allow the agent to communicate through the Relay. You will need to allow TCP 443 and ICMPv6. For additional information, please visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg433061.aspx. CA Certificates You can optionally require agents to sign their activation request with the Relay using a trusted certificate issued by a Certificate Authority (CA). Click on Activation Options to learn more. Groups To create your network topology you must first create a group. A group represents a logical container of endpoints (or machines) that can communicate through the Relay. You can create multiple groups allowing you to manage network communication differently. For example you could create a DEVELOPMENT group and a PRODUCTION group. To add an endpoint you must first install an agent that will create a virtual adapter on the machine on which it is installed (as discussed in the previous section). Once you have created a group and installed the agents, the machines will appear in the Windows Azure management portal and you can start assigning machines to groups. The next figure shows you that I created a group called LocalGroup and assigned two machines (both on-premise) to that group. Groups and Computers in Azure Connect As I mentioned previously you can allow these machines to establish a network connection. To do this, you must enable the Interconnected option in the group. The following diagram shows you the definition of the group. In this topology I chose to include local machines only, but I could also add worker roles and web roles in the Azure Roles section (you must first activate your roles, as discussed previously). You could also add other Groups, allowing you to manage inter-group communication. Defining a Group in Azure Connect Testing the Connection Now that my agents have been installed on my two machines, the group defined and the Interconnected option checked, I can test the connection between my machines. The next screenshot shows you that I sent a PING request to DEVLAP02 from DEVDSK02. The PING request was successful. Note however that the time is in the hundreds of milliseconds on average. That is to be expected because the machines are connecting through the Relay located in the cloud. Going through the Relay introduces an extra hop in the communication chain, so if your systems rely on high performance, you may want to conduct some basic performance tests. Sending a PING Request Through The Relay Conclusion As you can see, creating a network topology between machines using the Azure Connect service is simple. It took me less than five minutes to create the above configuration, including the time it took to install the Azure Connect agents on the two machines. The flexibility of Azure Connect allows you to create a virtual network between disparate environments, as long as your operating systems are supported by the agent. For more information on Azure Connect, visit the MSDN website at http://msdn.microsoft.com/en-us/library/windowsazure/gg432997.aspx. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting, a company specialized in cloud computing products and services. Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" from Apress and runs the Azure Florida Association (on LinkedIn: http://www.linkedin.com/groups?gid=4177626). For more information on Blue Syntax Consulting, visit www.bluesyntax.net. Special Thanks I would like thank those that helped me figure out how Azure Connect works: Marcel Meijer - http://blogs.msmvps.com/marcelmeijer/ Michael Wood - Http://www.mvwood.com Glenn Block - http://www.codebetter.com/glennblock Yves Goeleven - http://cloudshaper.wordpress.com/ Sandrino Di Mattia - http://fabriccontroller.net/ Mike Martin - http://techmike2kx.wordpress.com

  Read the article

• Creating a Training Lab on Windows Azure

  - by Michael Stephenson

  Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/06/17/153149.aspxThis week we are preparing for a training course that Alan Smith will be running for the support teams at one of my customers around Windows Azure. In order to facilitate the training lab we have a few prerequisites we need to handle. One of the biggest ones is that although the support team all have MSDN accounts the local desktops they work on are not ideal for running most of the labs as we want to give them some additional developer background training around Azure. Some recent Azure announcements really help us in this area: MSDN software can now be used on Azure VM You don't pay for Azure VM's when they are no longer used  Since the support team only have limited experience of Windows Azure and the organisation also have an Enterprise Agreement we decided it would be best value for money to spin up a training lab in a subscription on the EA and then we can turn the machines off when we are done. At the same time we would be able to spin them back up when the users need to do some additional lab work once the training course is completed. In order to achieve this I wanted to create a powershell script which would setup my training lab. The aim was to create 18 VM's which would be based on a prebuilt template with Visual Studio and the Azure development tools. The script I used is described below The Start & Variables The below text will setup the powershell environment and some variables which I will use elsewhere in the script. It will also import the Azure Powershell cmdlets. You can see below that I will need to download my publisher settings file and know some details from my Azure account. At this point I will assume you have a basic understanding of Azure & Powershell so already know how to do this. Set-ExecutionPolicy Unrestrictedcls $startTime = get-dateImport-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\Azure.psd1"# Azure Publisher Settings $azurePublisherSettings = '<Your settings file>.publishsettings'  # Subscription Details $subscriptionName = "<Your subscription name>" $defaultStorageAccount = "<Your default storage account>"  # Affinity Group Details $affinityGroup = '<Your affinity group>' $dataCenter = 'West Europe' # From Get-AzureLocation  # VM Details $baseVMName = 'TRN' $adminUserName = '<Your admin username>' $password = '<Your admin password>' $size = 'Medium' $vmTemplate = '<The name of your VM template image>' $rdpFilePath = '<File path to save RDP files to>' $machineSettingsPath = '<File path to save machine info to>'    Functions In the next section of the script I have some functions which are used to perform certain actions. The first is called CreateVM. This will do the following actions: If the VM already exists it will be deleted Create the cloud service Create the VM from the template I have created Add an endpoint so we can RDP to them all over the same port Download the RDP file so there is a short cut the trainees can easily access the machine via Write settings for the machine to a log file  function CreateVM($machineNo) { # Specify a name for the new VM $machineName = "$baseVMName-$machineNo" Write-Host "Creating VM: $machineName"       # Get the Azure VM Image      $myImage = Get-AzureVMImage $vmTemplate   #If the VM already exists delete and re-create it $existingVm = Get-AzureVM -Name $machineName -ServiceName $serviceName if($existingVm -ne $null) { Write-Host "VM already exists so deleting it" Remove-AzureVM -Name $machineName -ServiceName $serviceName }   "Creating Service" $serviceName = "bupa-azure-train-$machineName" Remove-AzureService -Force -ServiceName $serviceName New-AzureService -Location $dataCenter -ServiceName $serviceName   Write-Host "Creating VM: $machineName" New-AzureQuickVM -Windows -name $machineName -ServiceName $serviceName -ImageName $myImage.ImageName -InstanceSize $size -AdminUsername $adminUserName -Password $password  Write-Host "Updating the RDP endpoint for $machineName" Get-AzureVM -name $machineName -ServiceName $serviceName ` | Add-AzureEndpoint -Name RDP -Protocol TCP -LocalPort 3389 -PublicPort 550 ` | Update-AzureVM    Write-Host "Get the RDP File for machine $machineName" $machineRDPFilePath = "$rdpFilePath\$machineName.rdp" Get-AzureRemoteDesktopFile -name $machineName -ServiceName $serviceName -LocalPath "$machineRDPFilePath"   WriteMachineSettings "$machineName" "$serviceName" }    The delete machine settings function is used to delete the log file before we start re-running the process.  function DeleteMachineSettings() { Write-Host "Deleting the machine settings output file" [System.IO.File]::Delete("$machineSettingsPath"); }    The write machine settings function will get the VM and then record its details to the log file. The importance of the log file is that I can easily provide the information for all of the VM's to our infrastructure team to be able to configure access to all of the VM's    function WriteMachineSettings([string]$vmName, [string]$vmServiceName) { Write-Host "Writing to the machine settings output file"   $vm = Get-AzureVM -name $vmName -ServiceName $vmServiceName $vmEndpoint = Get-AzureEndpoint -VM $vm -Name RDP   $sb = new-object System.Text.StringBuilder $sb.Append("Service Name: "); $sb.Append($vm.ServiceName); $sb.Append(", "); $sb.Append("VM: "); $sb.Append($vm.Name); $sb.Append(", "); $sb.Append("RDP Public Port: "); $sb.Append($vmEndpoint.Port); $sb.Append(", "); $sb.Append("Public DNS: "); $sb.Append($vmEndpoint.Vip); $sb.AppendLine(""); [System.IO.File]::AppendAllText($machineSettingsPath, $sb.ToString());  } # end functions    Rest of Script In the rest of the script it is really just the bit that orchestrates the actions we want to happen. It will load the publisher settings, select the Azure subscription and then loop around the CreateVM function and create 16 VM's  Import-AzurePublishSettingsFile $azurePublisherSettings Set-AzureSubscription -SubscriptionName $subscriptionName -CurrentStorageAccount $defaultStorageAccount Select-AzureSubscription -SubscriptionName $subscriptionName  DeleteMachineSettings    "Starting creating Bupa International Azure Training Lab" $numberOfVMs = 16  for ($index=1; $index -le $numberOfVMs; $index++) { $vmNo = "$index" CreateVM($vmNo); }    "Finished creating Bupa International Azure Training Lab" # Give it a Minute Start-Sleep -s 60  $endTime = get-date "Script run time " + ($endTime - $startTime)    Conclusion As you can see there is nothing too fancy about this script but in our case of creating a small isolated training lab which is not connected to our corporate network then we can easily use this to provision the lab. Im sure if this is of use to anyone you can easily modify it to do other things with the lab environment too. A couple of points to note are that there are some soft limits in Azure about the number of cores and services your subscription can use. You may need to contact the Azure support team to be able to increase this limit. In terms of the real business value of this approach, it was not possible to use the existing desktops to do the training on, and getting some internal virtual machines would have been relatively expensive and time consuming for our ops team to do. With the Azure option we are able to spin these machines up for a temporary period during the training course and then throw them away when we are done. We expect the costing of this test lab to be very small, especially considering we have EA pricing. As a ball park I think my 18 lab VM training environment will cost in the region of $80 per day on our EA. This is a fraction of the cost of the creation of a single VM on premise.

  Read the article

• Windows Azure: General Availability of Web Sites + Mobile Services, New AutoScale + Alerts Support, No Credit Card Needed for MSDN

  - by ScottGu

  This morning we released a major set of updates to Windows Azure.  These updates included: Web Sites: General Availability Release of Windows Azure Web Sites with SLA Mobile Services: General Availability Release of Windows Azure Mobile Services with SLA Auto-Scale: New automatic scaling support for Web Sites, Cloud Services and Virtual Machines Alerts/Notifications: New email alerting support for all Compute Services (Web Sites, Mobile Services, Cloud Services, and Virtual Machines) MSDN: No more credit card requirement for sign-up All of these improvements are now available to use immediately (note: some are still in preview).  Below are more details about them. Web Sites: General Availability Release of Windows Azure Web Sites I’m incredibly excited to announce the General Availability release of Windows Azure Web Sites. The Windows Azure Web Sites service is perfect for hosting a web presence, building customer engagement solutions, and delivering business web apps.  Today’s General Availability release means we are taking off the “preview” tag from the Free and Standard (formerly called reserved) tiers of Windows Azure Web Sites.  This means we are providing: A 99.9% monthly SLA (Service Level Agreement) for the Standard tier Microsoft Support available on a 24x7 basis (with plans that range from developer plans to enterprise Premier support) The Free tier runs in a shared compute environment and supports up to 10 web sites. While the Free tier does not come with an SLA, it works great for rapid development and testing and enables you to quickly spike out ideas at no cost. The Standard tier, which was called “Reserved” during the preview, runs using dedicated per-customer VM instances for great performance, isolation and scalability, and enables you to host up to 500 different Web sites within them.  You can easily scale your Standard instances on-demand using the Windows Azure Management Portal.  You can adjust VM instance sizes from a Small instance size (1 core, 1.75GB of RAM), up to a Medium instance size (2 core, 3.5GB of RAM), or Large instance (4 cores and 7 GB RAM).  You can choose to run between 1 and 10 Standard instances, enabling you to easily scale up your web backend to 40 cores of CPU and 70GB of RAM: Today’s release also includes general availability support for custom domain SSL certificate bindings for web sites running using the Standard tier. Customers will be able to utilize certificates they purchase for their custom domains and use either SNI or IP based SSL encryption. SNI encryption is available for all modern browsers and does not require an IP address.  SSL certificates can be used for individual sites or wild-card mapped across multiple sites (we charge extra for the use of a SSL cert – but the fee is per-cert and not per site which means you pay once for it regardless of how many sites you use it with).  Today’s release also includes the following new features: Auto-Scale support Today’s Windows Azure release adds preview support for Auto-Scaling web sites.  This enables you to setup automatic scale rules based on the activity of your instances – allowing you to automatically scale down (and save money) when they are below a CPU threshold you define, and automatically scale up quickly when traffic increases.  See below for more details. 64-bit and 32-bit mode support You can now choose to run your standard tier instances in either 32-bit or 64-bit mode (previously they only ran in 32-bit mode).  This enables you to address even more memory within individual web applications. Memory dumps Memory dumps can be very useful for diagnosing issues and debugging apps. Using a REST API, you can now get a memory dump of your sites, which you can then use for investigating issues in Visual Studio Debugger, WinDbg, and other tools. Scaling Sites Independently Prior to today’s release, all sites scaled up/down together whenever you scaled any site in a sub-region. So you may have had to keep your proof-of-concept or testing sites in a separate sub-region if you wanted to keep them in the Free tier. This will no longer be necessary.  Windows Azure Web Sites can now mix different tier levels in the same geographic sub-region. This allows you, for example, to selectively move some of your sites in the West US sub-region up to Standard tier when they require the features, scalability, and SLA of the Standard tier. Full pricing details on Windows Azure Web Sites can be found here.  Note that the “Shared Tier” of Windows Azure Web Sites remains in preview mode (and continues to have discounted preview pricing).  Mobile Services: General Availability Release of Windows Azure Mobile Services I’m incredibly excited to announce the General Availability release of Windows Azure Mobile Services.  Mobile Services is perfect for building scalable cloud back-ends for Windows 8.x, Windows Phone, Apple iOS, Android, and HTML/JavaScript applications.  Customers We’ve seen tremendous adoption of Windows Azure Mobile Services since we first previewed it last September, and more than 20,000 customers are now running mobile back-ends in production using it.  These customers range from startups like Yatterbox, to university students using Mobile Services to complete apps like Sly Fox in their spare time, to media giants like Verdens Gang finding new ways to deliver content, and telcos like TalkTalk Business delivering the up-to-the-minute information their customers require.  In today’s Build keynote, we demonstrated how TalkTalk Business is using Windows Azure Mobile Services to deliver service, outage and billing information to its customers, wherever they might be. Partners When we unveiled the source control and Custom API features I blogged about two weeks ago, we enabled a range of new scenarios, one of which is a more flexible way to work with third party services.  The following blogs, samples and tutorials from our partners cover great ways you can extend Mobile Services to help you build rich modern apps: New Relic allows developers to monitor and manage the end-to-end performance of iOS and Android applications connected to Mobile Services. SendGrid eliminates the complexity of sending email from Mobile Services, saving time and money, while providing reliable delivery to the inbox. Twilio provides a telephony infrastructure web service in the cloud that you can use with Mobile Services to integrate phone calls, text messages and IP voice communications into your mobile apps. Xamarin provides a Mobile Services add on to make it easy building cross-platform connected mobile aps. Pusher allows quickly and securely add scalable real-time messaging functionality to Mobile Services-based web and mobile apps. Visual Studio 2013 and Windows 8.1 This week during //build/ keynote, we demonstrated how Visual Studio 2013, Mobile Services and Windows 8.1 make building connected apps easier than ever. Developers building Windows 8 applications in Visual Studio can now connect them to Windows Azure Mobile Services by simply right clicking then choosing Add Connected Service. You can either create a new Mobile Service or choose existing Mobile Service in the Add Connected Service dialog. Once completed, Visual Studio adds a reference to Mobile Services SDK to your project and generates a Mobile Services client initialization snippet automatically. Add Push Notifications Push Notifications and Live Tiles are a key to building engaging experiences. Visual Studio 2013 and Mobile Services make it super easy to add push notifications to your Windows 8.1 app, by clicking Add a Push Notification item: The Add Push Notification wizard will then guide you through the registration with the Windows Store as well as connecting your app to a new or existing mobile service. Upon completion of the wizard, Visual Studio will configure your mobile service with the WNS credentials, as well as add sample logic to your client project and your mobile service that demonstrates how to send push notifications to your app. Server Explorer Integration In Visual Studio 2013 you can also now view your Mobile Services in the the Server Explorer. You can add tables, edit, and save server side scripts without ever leaving Visual Studio, as shown on the image below: Pricing With today’s general availability release we are announcing that we will be offering Mobile Services in three tiers – Free, Standard, and Premium.  Each tier is metered using a simple pricing model based on the # of API calls (bandwidth is included at no extra charge), and the Standard and Premium tiers are backed by 99.9% monthly SLAs.  You can elastically scale up or down the number of instances you have of each tier to increase the # of API requests your service can support – allowing you to efficiently scale as your business grows. The following table summarizes the new pricing model (full pricing details here):   You can find the full details of the new pricing model here. Build Conference Talks The //BUILD/ conference will be packed with sessions covering every aspect of developing connected applications with Mobile Services. The best part is that, even if you can’t be with us in San Francisco, every session is being streamed live. Be sure not to miss these talks: Mobile Services – Soup to Nuts — Josh Twist Building Cross-Platform Apps with Windows Azure Mobile Services — Chris Risner Connected Windows Phone Apps made Easy with Mobile Services — Yavor Georgiev Build Connected Windows 8.1 Apps with Mobile Services — Nick Harris Who’s that user? Identity in Mobile Apps — Dinesh Kulkarni Building REST Services with JavaScript — Nathan Totten Going Live and Beyond with Windows Azure Mobile Services — Kirill Gavrylyuk , Paul Batum Protips for Windows Azure Mobile Services — Chris Risner AutoScale: Dynamically scale up/down your app based on real-world usage One of the key benefits of Windows Azure is that you can dynamically scale your application in response to changing demand. In the past, though, you have had to either manually change the scale of your application, or use additional tooling (such as WASABi or MetricsHub) to automatically scale your application. Today, we’re announcing that AutoScale will be built-into Windows Azure directly.  With today’s release it is now enabled for Cloud Services, Virtual Machines and Web Sites (Mobile Services support will come soon). Auto-scale enables you to configure Windows Azure to automatically scale your application dynamically on your behalf (without any manual intervention) so you can achieve the ideal performance and cost balance. Once configured it will regularly adjust the number of instances running in response to the load in your application. Currently, we support two different load metrics: CPU percentage Storage queue depth (Cloud Services and Virtual Machines only) We’ll enable automatic scaling on even more scale metrics in future updates. When to use Auto-Scale The following are good criteria for services/apps that will benefit from the use of auto-scale: The service/app can scale horizontally (e.g. it can be duplicated to multiple instances) The service/app load changes over time If your app meets these criteria, then you should look to leverage auto-scale. How to Enable Auto-Scale To enable auto-scale, simply navigate to the Scale tab in the Windows Azure Management Portal for the app/service you wish to enable.  Within the scale tab turn the Auto-Scale setting on to either CPU or Queue (for Cloud Services and VMs) to enable Auto-Scale.  Then change the instance count and target CPU settings to configure the Auto-Scale ranges you want to maintain. The image below demonstrates how to enable Auto-Scale on a Windows Azure Web-Site.  I’ve configured the web-site so that it will run using between 1 and 5 VM instances.  The exact # used will depend on the aggregate CPU of the VMs using the 40-70% range I’ve configured below.  If the aggregate CPU goes above 70%, then Windows Azure will automatically add new VMs to the pool (up to the maximum of 5 instances I’ve configured it to use).  If the aggregate CPU drops below 40% then Windows Azure will automatically start shutting down VMs to save me money: Once you’ve turned auto-scale on, you can return to the Scale tab at any point and select Off to manually set the number of instances. Using the Auto-Scale Preview With today’s update you can now, in just a few minutes, have Windows Azure automatically adjust the number of instances you have running  in your apps to keep your service performant at an even better cost. Auto-scale is being released today as a preview feature, and will be free until General Availability. During preview, each subscription is limited to 10 separate auto-scale rules across all of the resources they have (Web sites, Cloud services or Virtual Machines). If you hit the 10 limit, you can disable auto-scale for any resource to enable it for another. Alerts and Notifications Starting today we are now providing the ability to configure threshold based alerts on monitoring metrics. This feature is available for compute services (cloud services, VM, websites and mobiles services). Alerts provide you the ability to get proactively notified of active or impending issues within your application.  You can define alert rules for: Virtual machine monitoring metrics that are collected from the host operating system (CPU percentage, network in/out, disk read bytes/sec and disk write bytes/sec) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. Cloud service monitoring metrics that are collected from the host operating system (same as VM), monitoring metrics from the guest VM (from performance counters within the VM) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. For Web Sites and Mobile Services, alerting rules can be configured on monitoring metrics from monitoring endpoint urls (response time and uptime) that you have configured. Creating Alert Rules You can add an alert rule for a monitoring metric by navigating to the Setting -> Alerts tab in the Windows Azure Management Portal. Click on the Add Rule button to create an alert rule. Give the alert rule a name and optionally add a description. Then pick the service which you want to define the alert rule on: The next step in the alert creation wizard will then filter the monitoring metrics based on the service you selected:   Once created the rule will show up in your alerts list within the settings tab: The rule above is defined as “not activated” since it hasn’t tripped over the CPU threshold we set.  If the CPU on the above machine goes over the limit, though, I’ll get an email notifying me from an Windows Azure Alerts email address ([email protected]). And when I log into the portal and revisit the alerts tab I’ll see it highlighted in red.  Clicking it will then enable me to see what is causing it to fail, as well as view the history of when it has happened in the past. Alert Notifications With today’s initial preview you can now easily create alerting rules based on monitoring metrics and get notified on active or impending issues within your application that require attention. During preview, each subscription is limited to 10 alert rules across all of the services that support alert rules. No More Credit Card Requirement for MSDN Subscribers Earlier this month (during TechEd 2013), Windows Azure announced that MSDN users will get Windows Azure Credits every month that they can use for any Windows Azure services they want. You can read details about this in my previous Dev/Test blog post. Today we are making further updates to enable an easier Windows Azure signup for MSDN users. MSDN users will now not be required to provide payment information (e.g. no credit card) during sign-up, so long as they use the service within the included monetary credit for the billing period. For usage beyond the monetary credit, they can enable overages by providing the payment information and remove the spending limit. This enables a super easy, one page sign-up experience for MSDN users.  Simply sign-up for your Windows Azure trial using the same Microsoft ID that you use to manage your MSDN account, then complete the one page sign-up form below and you will be able to spend your free monthly MSDN credits (up to $150 each month) on any Windows Azure resource for dev/test:   This makes it trivially easy for every MDSN customer to start using Windows Azure today.  If you haven’t signed up yet, I definitely recommend checking it out. Summary Today’s release includes a ton of great features that enable you to build even better cloud solutions.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

  - by SQLOS Team

  Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services.  Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports   Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal):   Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired.   1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses   3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode   5.       Restart SQL Server service for the change to take effect 6.       Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.   Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password.   Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok.   Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port   Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.  Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Azure website that talks to third party services

  - by Andy Frank

  I have website that crawls data from many third party services when user browse to webpage. This can be really slow because I hit third party server and process returned data before showing it to user. I am hosting website on Azure (shared mode). I am thinking to improve my implementation. Here is what I am thinking... Run a service that crawls data from third party services, process it and then store it in database. when user browse to my site, my site pulls data from database and display them to user. But above solution is not clear to me. Should I have normal service or wcf service? If wcf service then should website talk to database or wcf service (that can access data from database)? If normal service then how can I deploy on Azure?

  Read the article

• More Great Improvements to the Windows Azure Management Portal

  - by ScottGu

  Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal.  These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately.  Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them.  You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it.  This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts.  You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it.  This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site.  After that, subsequent sites could only be created in that same region.  This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region.  This allows you to now deploy sites to North America, Europe and Asia simultaneously.  Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories).  Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role.  The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal.  This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab.  All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure.  Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server).  When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server.  You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code.  Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts.  To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners.  It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >