Search Results

Search found 29422 results on 1177 pages for 'port scanning service'.

Page 300/1177 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

  • Socket read() hangs for a while when there is no data to read.

    - by janesconference
    Hi' I'm writing a simple http port forwarder. I read data from port 80, and pass the data to my lighttpd server, on port 8080. As long as I write() data on the socket on port 8080 (forwarding the request) there's no problem, but when I read() data from that socket (forwarding the response), the last read() hangs a lot (about 1 or 2 seconds) before realizing there's no more data and returning 0. I tried to set the socket to non-blocking, but this doesn't work, as sometimes it returns EWOULDBLOCKING even if there's some data left (lighttpd + cgi can be quite slow). I tried to set a timeout with select(), but, as above, a slow cgi could timeout the socket when there's actually some data to transmit. How would you do?

    Read the article

  • Sockets, Threads and Services in android, how to make them work together ?

    - by Spredzy
    Hi all, I am facing a probleme with threads and sockets I cant figure it out, if someone can help me please i would really appreciate. There are the facts : I have a service class NetworkService, inside this class I have a Socket attribute. I would like it be at the state of connected for the whole lifecycle of the service. To connect the socket I do it in a thread, so if the server has to timeout, it would not block my UI thread. Problem is, into the thread where I connect my socket everything is fine, it is connected and I can talk to my server, once this thread is over and I try to reuse the socket, in another thread, I have the error message Socket is not connected. Questions are : - Is the socket automatically disconnected at the end of the thread? - Is their anyway we can pass back a value from a called thread to the caller ? Thanks a lot, Here is my code public class NetworkService extends Service { private Socket mSocket = new Socket(); private void _connectSocket(String addr, int port) { Runnable connect = new connectSocket(this.mSocket, addr, port); new Thread(connect).start(); } private void _authentification() { Runnable auth = new authentification(); new Thread(auth).start(); } private INetwork.Stub mBinder = new INetwork.Stub() { @Override public int doConnect(String addr, int port) throws RemoteException { _connectSocket(addr, port); _authentification(); return 0; } }; class connectSocket implements Runnable { String addrSocket; int portSocket; int TIMEOUT=5000; public connectSocket(String addr, int port) { addrSocket = addr; portSocket = port; } @Override public void run() { SocketAddress socketAddress = new InetSocketAddress(addrSocket, portSocket); try { mSocket.connect(socketAddress, TIMEOUT); PrintWriter out = new PrintWriter(mSocket.getOutputStream(), true); out.println("test42"); Log.i("connectSocket()", "Connection Succesful"); } catch (IOException e) { Log.e("connectSocket()", e.getMessage()); e.printStackTrace(); } } } class authentification implements Runnable { private String constructFirstConnectQuery() { String query = "toto"; return query; } @Override public void run() { BufferedReader in; PrintWriter out; String line = ""; try { in = new BufferedReader(new InputStreamReader(mSocket.getInputStream())); out = new PrintWriter(mSocket.getOutputStream(), true); out.println(constructFirstConnectQuery()); while (mSocket.isConnected()) { line = in.readLine(); Log.e("LINE", "[Current]- " + line); } } catch (IOException e) {e.printStackTrace();} } }

    Read the article

  • Prepopulate drop-box according to another drop-box choice in Django Admin

    - by onorua
    I have models like this: class User(models.Model): Switch = models.ForeignKey(Switch, related_name='SwitchUsers') Port = models.ForeignKey(Port) class Switch(models.Model): Name = models.CharField(max_length=50) class Port(models.Model): PortNum = models.PositiveIntegerField() Switch = models.ForeignKey(Switch, related_name = "Ports") When I'm in Admin interface and choose Switch from Switches available, I would like to have Port prepopulated accordingly with Ports from the related Switch. As far as I understand I need to create some JS script to prepopulate it. Unfortunately I don't have this experience, and I would like to keep things simple as it possible and don't rewrite all Django admin interface. Just add this functionality for one Field. Could you please help me with my problem? Thank you.

    Read the article

  • Need help with displaying the message correctly in the pole display

    - by SA
    Hi, I am using an HP RS232 pole display with the following setting: Char type: USA/Europe (default) Command mode: EPSON (default) Baud rate: 9600, n , 8, 1 (default?) Passthru None (Default) Here's the code using System.IO.Ports; private SerialPort port; port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.Handshake = Handshake.None; Port.WriteLine("Welocome to something something"); It has 2 lines consisting of 20 characters each with a total of 40 characters. I have no control how and where the characters get displayed. I have set it to accept ASCII char set and so I am able to type as is visble in the Writeline message

    Read the article

  • Connecting Java se Client to Glassfish

    - by Henrik Bierbum Bacher
    We are having some difficulties connecting our Java SE standalone client with the EJB module deployed on a remote GlassFish server. Pointers to how we are supposed to connect our client would be appreciated. The client code we currently has to get the initial context: props.setProperty("org.omg.CORBA.ORBInitialHost", "*remotehost*"); props.setProperty("org.omg.CORBA.ORBInitialPort", "portNumber"); javax.naming.InitialContext ic = new javax.naming.InitialContext(props); *We have tried several different port numbers; 3700, 7676, 8080.. The closest we are getting, got us the error: "Error in GIOP magic". I read that jms are using port 7676 as a broker port for a bunch of dynamically generated ports, but can't figure out how to specify those ports in order to create proper port-forwards.

    Read the article

  • Add webservice reference, the classes in different file

    - by ArunDhaJ
    Hi, When I add webservice as service reference in my .Net project, it creates a service folder within "Service References". All the interfaces and classes are contained within that service folder. I wanted to know how to split the interface's method and classes. Actually I wanted the web service reference to import classes defined in different dll. I wanted to define this way because of my design constraints. I've 3 layered application. Of which third layer is communication layer which holds all web service references. second is business layer and first is presentation layer. If the class declarations are in layer-3 and I'm accessing those classes from presentation layer, it is logically a cross-layer-access-violation. Instead, I wanted a separate project which holds only the class declarations and this would be used in all 3 layers. I didn't faced any problems to achieve this with layer-1 and layer-2. But, I'm not sure how to make communication layer to use this common declaration dll. Your suggestion would help me to design my application better. Thanks in advance Regards ArunDhaJ

    Read the article

  • linux raw socket programming question

    - by user194420
    Hi all, I am trying to create a raw socket which send and receive message with ip/tcp header under linux. I can successfully binds to a port and receive tcp message(ie:syn) However, the message seems to be handled by the os, but not mine. I am just a reader of it(like wireshark). My raw socket binds to port 8888, and then i try to telnet to that port . In wireshark, it shows that the port 8888 reply a "rst ack" when it receive the "syn" request. In my program, it shows that it receive a new message and it doesnot reply with any message. Any way to actually binds to that port?(prevent os handle it) Here is part of my code, i try to cut those error checking for easy reading sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); int tmp = 1; const int *val = &tmp; setsockopt (sockfd, IPPROTO_IP, IP_HDRINCL, val, sizeof (tmp)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr = htonl(INADDR_ANY); servaddr.sin_port = htons(8888); bind(sockfd, (struct sockaddr*)&servaddr, sizeof(servaddr)); //call recv in loop

    Read the article

  • Add less than integer variable to string search

    - by user1691832
    I'm scanning a text document for certain installed programs on a computer and looking for an easy way to include a greater or less than variable in the string I'm scanning for. Here is a very ugly and cumbersome example of what I'm using currently and while it works as a temporary fix, isn't practical or sustainable. If CheckBox2.Checked Then sReader.Close() If text.Contains("Adobe Flash Player 11 Plugin") And text.Contains("Adobe Flash Player 11 ActiveX") Then Else If text.Contains("Adobe Flash Player 12 Plugin") And text.Contains("Adobe Flash Player 12 ActiveX") Then Else If text.Contains("Adobe Flash Player 13 Plugin") And text.Contains("Adobe Flash Player 13 ActiveX") Then Else '(Goes ahead and does a silent install of the missing or outdated program) So far I've run into this problem with both Adobe Flash and Java RTE and am certain to run into it with future programs. Essentially I need to scan for "Adobe Flash Player (Any number less than 11) Plugin" , "Adobe Flash Player (Any number less than 11) ActiveX" , "Java (number less than 9) Update (any number)". I'm sure whatever solution is offered can likely be adapted to similar programs I'm likely to encounter later. Thanks ----- Edit ----- I've since tried the following code but it always returns the "Found" messagebox, even when no version of adobe flash is present in the file it is scanning. If CheckBox2.Checked Then sReader.Close() Dim options As RegexOptions = RegexOptions.None Dim regex As Regex = New Regex("Adobe Flash Player (?<version>\d+) (Plugin|ActiveX)", options) Dim input As String = "Adobe Flash Player 11 Plugin" ' Get match Dim match As Match = regex.Match(input) Dim version As String = match.Groups("version").Value If (match.Success) Then MessageBox.Show("Version 11 or higher found, skipping install") Else MessageBox.Show("Version 11 or higher not found, installing Version 11")

    Read the article

  • how to know application is going to destroy/remove?

    - by Bhavesh Jethani
    My requirement is, i want to cancel my alarm manager or services when application going to destroy/closed. if i am in activity A by clicking on button started activity B suddenly user is going to press home button. ---- if application is running in background then don't cancel service. but when he going to remove from recent list of application at that time cancel service. Service/Alarm manager will work even when user has sent application in background by pressing home screen. No of way application can destroy or removed. 1) by clicking back button multiple times if stack have multiple activities. 2) by pressing home button and then remove from recent list. i am facing issue with (2)second option. in that when user press home button at that time service or alarm manager should be work. But when user will be going to remove application from recent list at that time i want to cancel service/alarm manager. Second issue. my service is called at fix interval of time. if i will write code on onCreate(), onDestroy() in each activity. then timer will start from beginning. Is there any listners who talk me application is going to closed?

    Read the article

  • python sending incomplete data over socket

    - by tipu
    I have this socket server script, import SocketServer import shelve import zlib class MyTCPHandler(SocketServer.BaseRequestHandler): def handle(self): self.words = shelve.open('/home/tipu/Dropbox/dev/workspace/search/words.db', 'r'); self.tweets = shelve.open('/home/tipu/Dropbox/dev/workspace/search/tweets.db', 'r'); param = self.request.recv(1024).strip() try: result = str(self.words[param]) except KeyError: result = "set()" self.request.send(str(result)) if __name__ == "__main__": HOST, PORT = "localhost", 50007 SocketServer.TCPServer.allow_reuse_address = True server = SocketServer.TCPServer((HOST, PORT), MyTCPHandler) server.serve_forever() And this receiver, from django.http import HttpResponse from django.template import Context, loader import shelve import zlib import socket def index(req, param = ''): HOST = 'localhost' PORT = 50007 s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect((HOST, PORT)) s.send(param) data = zlib.decompress(s.recv(131072)) s.close() print 'Received', repr(data) t = loader.get_template('index.html') c = Context({ 'foo' : data }) return HttpResponse(t.render(c)) I am sending strings to the receiver that are in the hundreds of kilobytes. I end up only receiving a portion of it. Is there a way that I can fix that so that the whole string is sent?

    Read the article

  • What's the vbs code to schedule a task every time Windows starts up?

    - by Wing C. Chen
    I would like to know how to write up the vbs code to schedule a windows task to start a .exe program every time the Windows starts up. I found the following code online: strComputer = "." Set objWMIService = GetObject("winmgmts:" _ & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2") Set objNewJob = objWMIService.Get("Win32_ScheduledJob") errJobCreated = objNewJob.Create _ ("Notepad.exe", "********123000.000000-420", _ True , 1 OR 4 OR 16, , , JobID) Wscript.Echo errJobCreated But it only tells me how to schedule the task every on some specific days and hours. I thought of creating a windows service. However the following is the story why I must look for an alternative to it. I created a windows service with RunAsService for my java program wrapped with Janel. The Service worked fine when I first installed and started it. However, after restarting my windows xp, a dialog window poped out saying that my janel generated .exe file has crashed, with my RunAsService service kept on going. The service worked fine when I terminated the service and restarted it again manually. Nevertheless, the same crash happens over and over again every time I restart my Windows.

    Read the article

  • getting global name not defined error

    - by nashr rafeeg
    i have the following class class notify(): def __init__(self,server="localhost", port=23053): self.host = server self.port = port register = gntp.GNTPRegister() register.add_header('Application-Name',"SVN Monitor") register.add_notification("svnupdate",True) growl(register) def svn_update(self, author="Unknown", files=0): notice = gntp.GNTPNotice() notice.add_header('Application-Name',"SVN Monitor") notice.add_header('Notification-Name', "svnupdate") notice.add_header('Notification-Title',"SVN Commit") # notice.add_header('Notification-Icon',"") notice.add_header('Notification-Text',Msg) growl(notice) def growl(data): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect((self.host,self.port)) s.send(data) response = gntp.parse_gntp(s.recv(1024)) print response s.close() but when ever i try to use this class via the follwoing code i get 'NameError: global name 'growl' is not defined' from growlnotify import * n = notify() n.svn_update() any one has an idea what is going on here ? cheers nash

    Read the article

  • how to multithread on a python server

    - by user3732790
    HELP please i have this code import socket from threading import * import time HOST = '' # Symbolic name meaning all available interfaces PORT = 8888 # Arbitrary non-privileged port s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print ('Socket created') s.bind((HOST, PORT)) print ('Socket bind complete') s.listen(10) print ('Socket now listening') def listen(conn): odata = "" end = 'end' while end == 'end': data = conn.recv(1024) if data != odata: odata = data print(data) if data == b'end': end = "" print("conection ended") conn.close() while True: time.sleep(1) conn, addr = s.accept() print ('Connected with ' + addr[0] + ':' + str(addr[1])) Thread.start_new_thread(listen,(conn)) and i would like it so that when ever a person comes onto the server it has its own thread. but i can't get it to work please someone help me. :_( here is the error code: Socket created Socket bind complete Socket now listening Connected with 127.0.0.1:61475 Traceback (most recent call last): File "C:\Users\Myles\Desktop\test recever - Copy.py", line 29, in <module> Thread.start_new_thread(listen,(conn)) AttributeError: type object 'Thread' has no attribute 'start_new_thread' i am on python version 3.4.0 and here is the users code: import socket #for sockets import time s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) print('Socket Created') host = 'localhost' port = 8888 remote_ip = socket.gethostbyname( host ) print('Ip address of ' + host + ' is ' + remote_ip) #Connect to remote server s.connect((remote_ip , port)) print ('Socket Connected to ' + host + ' on ip ' + remote_ip) while True: message = input("> ") #Set the whole string s.send(message.encode('utf-8')) print ('Message send successfully') data = s.recv(1024) print(data) s.close

    Read the article

  • Remotely connecting two non-local computers with sockets

    - by Velizar Hristov
    This question seems like something very obvious to ask, and yet I spent more than an hour trying to find an answer. First I host and wait for someone to connect. Then, from another instance of the application, I try to connect with a socket - for the constructor, I use InetAddress, port. The port is always right, and everything works if I use "localhost" for the address. However, if I type my IP, I get an IOException. I even sent the application to someone else, gave him my IP, and it didn't work. The aim of the application is to connect two computers. It's in Java. Here is the relevant code. Server: ServerSocket serverSocket = new ServerSocket(port); Socket clientSocket = serverSocket.accept(); Client: InetAddress a = InetAddress.getByName(ip); Socket s = new Socket(a, port); I don't get past that. Obviously, the values of int port and String ip are taken from text fields. Edit: the purpose of my application is to connect two non-local computers.

    Read the article

  • Computer won't reboot without waiting for a while

    - by Benjamin
    I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

    Read the article

  • WCF cross-domain policy security error

    - by George2
    Hello everyone, I am using VSTS 2008 + C# + WCF + .Net 3.5 + Silverlight 3.0. I host Silverlight control in an html page and debug it from VSTS 2008 (press F5, then run in VSTS 2008 built-in ASP.Net development web server), then call another WCF service (hosted in another machine running IIS 7.0 + Vista). The WCF service is very simple, just return a constant string to client. When invoking the WCF service from Silverlight, I got the following error message, An error occurred while trying to make a request to URI 'https://LabTest/Test.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. Here is the clientaccesspolicy.xml file, anything wrong? <?xml version="1.0" encoding="utf-8" ?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*"> </domain> </allow-from> <grant-to> <resource path="/" include-subpaths="true"></resource> </grant-to> </policy> </cross-domain-access> </access-policy> thanks in advance, George

    Read the article

  • Help with OpenVPN setup on Windows Server 2003

    - by Bill Johnson
    Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

    Read the article

  • Javamail doesn't send a mail

    - by Jose Hdez
    I am developing a Java application and I am using Javamail to send a mail. My code is the following: Properties props = new Properties(); props.put("mail.smtp.host", "diana.cartif.es"); props.put("mail.smtp.socketFactory.port", "465"); props.put("mail.smtp.socketFactory.class","javax.net.ssl.SSLSocketFactory"); props.put("mail.smtp.auth", "true"); props.put("mail.smtp.port", "465"); Session session = Session.getDefaultInstance(props, new javax.mail.Authenticator() { protected PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication("alerts","pass"); } }); Message message = new MimeMessage(session); message.setFrom(new InternetAddress("[email protected]")); message.setRecipients(Message.RecipientType.TO,InternetAddress.parse("[email protected]")); message.setSubject("Testing Subject"); message.setText("Dear Mail Crawler," +"\n\n No spam to my email, please!"); Transport.send(message); However when I execute this code it throws an Exception: javax.mail.MessagingException: Could not connect to SMTP host: diana.cartif.es, port: 465, response: -1 at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1960) at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:642) at javax.mail.Service.connect(Service.java:317) at javax.mail.Service.connect(Service.java:176) at javax.mail.Service.connect(Service.java:125) at javax.mail.Transport.send0(Transport.java:194) at javax.mail.Transport.send(Transport.java:124) at com.cartif.data.MainConnection.getFTPConnection(MainConnection.java:106) at com.cartif.main.Main.connectToServer(Main.java:72) at com.cartif.main.Main.main(Main.java:60) Data to connect is right because I checked it in my Mail Server. Could someone help me please? Thanks!

    Read the article

  • Preventing a heavy process from sinking in the swap file

    - by eran
    Our service tends to fall asleep during the nights on our client's server, and then have a hard time waking up. What seems to happen is that the process heap, which is sometimes several hundreds of MB, is moved to the swap file. This happens at night, when our service is not used, and others are scheduled to run (DB backups, AV scans etc). When this happens, after a few hours of inactivity the first call to the service takes up to a few minutes (consequent calls take seconds). I'm quite certain it's an issue of virtual memory management, and I really hate the idea of forcing the OS to keep our service in the physical memory. I know doing that will hurt other processes on the server, and decrease the overall server throughput. Having that said, our clients just want our app to be responsive. They don't care if nightly jobs take longer. I vaguely remember there's a way to force Windows to keep pages on the physical memory, but I really hate that idea. I'm leaning more towards some internal or external watchdog that will initiate higher-level functionalities (there is already some internal scheduler that does very little, and makes no difference). If there were a 3rd party tool that provided that kind of service is would have been just as good. I'd love to hear any comments, recommendations and common solutions to this kind of problem. The service is written in VC2005 and runs on Windows servers.

    Read the article

  • Argc/Argv C Problems

    - by Salman
    Hey all, If I have the following code: main(int argc, char *argv[]){ char serveradd[20]; strcpy(serveradd, argv[1]); int port = atoi(argv[2]); printf("%s %d \n", serveradd, port); The first two arguments to the command line are printed. However, if I do this: char serveradd[20]; strcpy(serveradd, argv[1]); int port = atoi(argv[2]); char versionnum[1]; strcpy(versionnum, argv[3]); printf("%s %d %s \n", serveradd, port, versionnum);` The first argument (serveradd) does not print out to the screen and is not being stored... Why is this happening and how can I fix it? Thanks!

    Read the article

  • how to bind/connect multiple UDP socket

    - by nicboul
    My initial UDP socket is binded to 127.0.0.1:9898. The first time that I get notified of incoming data by epoll/kqueue, I do recvfrom() and I fill a struct sockaddr called peer_name that contain the peer informations (ip:port). Then I create a new UPD socket using socket(), then I bind() this newly created socket to the same ip:port (127.0.0.1:9898) than my original socket. then I connect my newly created socket using connect() to the peer who just sent me something. I have the information in the struct sockaddr called peer_name. I then add my newly created socket in my epoll/kqueue vector and wait for notification. I would expect to ONLY receive UDP frame from the peer i'm ""connected to"". 1/ does netstat -a -p udp is suppose to show me the IP:PORT of the peer my newly created socket is ""connected to"" ? 2/ I'm probably doing something wrong since after creating my new socket, this socket receive all incoming UDP packets destinated to the IP:PORT I'm binded to, regardless of the source peer IP:PORT. I would like to see a working example of what I'm trying to do :) or any hint on what I'm doing wrong. thanks!

    Read the article

  • Axis2 SOAP Envelope Header Information

    - by BigZig
    I'm consuming a web service that places an authentication token in the SOAP envelope header. It appears (through looking at the samples that came with the WS WSDL) that if the stub is generated in .NET, this header information is exposed through a member variable in the stub class. However, when I generate my Axis2 java stub using WSDL2Java it doesn't appear to be exposed anywhere. What is the correct way to extract this information from the SOAP envelope header? WSDL: http://www.vbar.com/zangelo/SecurityService.wsdl C# Sample: using System; using SignInSample.Security; // web service using SignInSample.Document; // web service namespace SignInSample { class SignInSampleClass { [STAThread] static void Main(string[] args) { // login to the Vault and set up the document service SecurityService secSvc = new SecurityService(); secSvc.Url = "http://localhost/AutodeskDM/Services/SecurityService.asmx"; secSvc.SecurityHeaderValue = new SignInSample.Security.SecurityHeader(); secSvc.SignIn("Administrator", "", "Vault"); DocumentServiceWse docSvc = new DocumentServiceWse(); docSvc.Url = "http://localhost/AutodeskDM/Services/DocumentService.asmx"; docSvc.SecurityHeaderValue = new SignInSample.Document.SecurityHeader(); docSvc.SecurityHeaderValue.Ticket = secSvc.SecurityHeaderValue.Ticket; docSvc.SecurityHeaderValue.UserId = secSvc.SecurityHeaderValue.UserId; } } } The sample illustrates what I'd like to do. Notice how the secSvc instance has a SecurityHeaderValue member variable that is populated after a successful secSvc.SignIn() invocation. Here's some relevant API documentation regarding the SignIn method: Although there is no return value, a successful sign in will populate the SecurityHeaderValue of the security service. The SecurityHeaderValue information is then used for other web service calls.

    Read the article

  • Error on installing xdebug via MacPorts

    - by Nareille
    I wanted to install xdebug via MacPorts, trying the terminal command sudo port install php5-xdebug But after a while the installation breaks, giving me an error ---> Configuring php5 Error: org.macports.configure for port php5 returned: configure failure: command execution failed Error: Failed to install php5 Please see the log file for port php5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_php5/php5/main.log Error: The following dependencies were not installed: php5 To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port php5-xdebug failed I checked with phpinfo(), that my version of php is 5.3.1 What am I missing? Thanks! (I'm on a Mac OSX Lion, running Apache with XAMPP, I installed PEAR and PHPUnit successfully)

    Read the article

  • Websphere 5.1 add SSL certificate

    - by Mikhail
    Hi All. I have the following instruction: Import ++++ certificate (in order to allow SSL connections) – it is done in Administrative Console for the corresponding WAS profile (Security-SSL certificate and key management-Key stores and certificates-NodeDefaultTrustStore-Signer certificates). Here you can simply add the attached trkd_cert.cer (“Add” button) or get it from port (“Retrieve from port” button, host: ++++.com, port 443) But this is valid for Websphere 6.1. Do somebody know how this can be done in WebSphere 5.1?

    Read the article

  • What's the BPF for HTTP?

    - by Gtker
    The definition can be seen here. The candidate answer may be tcp and dst port 80,but can tcp and dst port 80 guarantee it's HTTP traffic and includes all HTTP traffic? It seems not,because some site can be visited by specifying a different port other than 80 this way: http://domain.name:8080 So my question is: what's the exact BPF for HTTP?

    Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >