Search Results

Search found 10033 results on 402 pages for 'execution speed'.

Page 303/402 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

• Server 2008 RAID 5 Write Speeds

  - by Solipsism

  I recently configured a RAID 5 partition in Server 2008 with 4 RAID 5 disks. These disks are connected through a SATA expansion card that uses PCIe. This morning, I checked and they had finally finished synchronizing, and so I tried to do some speed tests. Copying off the disks started pretty much fine - speeds began at 125MB/s, then trailed down to about 70MB/s, which I found odd but not worrying. Writing TO the disks however is a completely different story. I attempted to copy some of my VM host ISOs onto the disks (~2-4 GB apiece) and this resulted in speeds of approximately 10MB/s. I tried copying both from a local disk (connected directly to the motherboard) and from another server ththe gigabit network and results were the same. I checked the performance monitor while transferring the files and the only thing that stuck out was that my memory hard faults shot up to 6,000 per minute (spiking around 200/s) by explorer.exe. The system is running 2GB of DDR667 ECC RAM and a quad-core 2.3GHz opteron. Is there anything I can do to fix this performance issue (buy more RAM? move the drives to a faster box?, etc) or am I just screwed so long as I stick to windows.

  Read the article

• SQL Server becomes slow after restart

  - by Tobi DM

  I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

  Read the article

• Exchange 2010 Hub Transport Role Fails - Registry Keys Missing?

  - by DKNUCKLES

  I've inherited an attempted Exchange 2010 implementation from a colleague that apparently failed. I've almost managed to bring it back from the dead, but the Hub Transport role fails to install with the following error [10/06/2012 02:30:44.0119] [2] Beginning processing Set-LocalPermissions -Feature:'Bridgehead' [10/06/2012 02:30:44.0166] [2] [ERROR] Unexpected Error [10/06/2012 02:30:44.0166] [2] [ERROR] The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0182] [2] Ending processing Set-LocalPermissions [10/06/2012 02:30:44.0182] [1] The following 1 error(s) occurred during task execution: [10/06/2012 02:30:44.0182] [1] 0. ErrorRecord: The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0182] [1] 0. ErrorRecord: System.ArgumentException: The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.GetTargetRegistryKey(XmlNode targetNode) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.ChangePermissions[TTarget,TSecurity,TAccessRule,TRights](XmlNode targetNode, Dictionary`2 rightsDictionary, GetTarget`1 getTarget, GetOrginalPermissionsOnTarget`2 getOrginalPermissionsOnTarget, SetPermissionsOnTarget`2 setPermissionsOnTarget, CreateAccessRule`2 createAccessRule, AddAccessRule`2 addAccessRule, RemoveAccessRuleAll`1 removeAccessRuleAll) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetPermissionsOnCurrentLevel[TTarget,TSecurity,TAccessRule,TRights](XmlNode permissionSetNode, String targetType, Dictionary`2 rightsDictionary, GetTarget`1 getTarget, GetOrginalPermissionsOnTarget`2 getOrginalPermissionsOnTarget, SetPermissionsOnTarget`2 setPermissionsOnTarget, CreateAccessRule`2 createAccessRule, AddAccessRule`2 addAccessRule, RemoveAccessRuleAll`1 removeAccessRuleAll) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetPermissionsOnCurrentLevel(XmlNode permissionSetNode) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetFeaturePermissions(String feature) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.InternalProcessRecord() [10/06/2012 02:30:44.0197] [1] [ERROR] The following error was generated when "$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead" " was run: "The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE".". [10/06/2012 02:30:44.0197] [1] [ERROR] The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0197] [1] [ERROR-REFERENCE] Id=BridgeheadLocalPermissionsComponent___2e2dbc2a97cb4429bc2074edc50bedbd Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup [10/06/2012 02:30:44.0197] [1] Setup is stopping now because of one or more critical errors. [10/06/2012 02:30:44.0197] [1] Finished executing component tasks. [10/06/2012 02:30:44.0244] [1] Ending processing Install-BridgeheadRole I've been unable to find any documentation on how to resolve this issue. Any help would be appreciated.

  Read the article

• Mac OS X Terminal.app Ubuntu 9.10 SSHD and incorrect keyboard mapping

  - by Jesse

  Does anyone have any Idea how to handle this? I can't stand connecting to certain Ubuntu boxes via Mac OS X because of issues with keyboard layout etc. I have set TERM=vt100 and TERM=xterm-color in Ubuntu .bashrc and also in the Terminal.app advanced preferences and nothing seems to fix this issue. Trying to use arrow keys on slim silver keyboard results in ^[[A etc. From Answer OS X 10.6.4 When I try to run /lib/terminfo/x/xterm-color I get permission denied? Maybe this is the issue?! Regular bash login shell. If I sudo often it works. Which leads me to believe the above permissions problem is the cause. Output from stty -a: $ stty -a speed 9600 baud; rows 47; columns 181; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe -echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke

  Read the article

• Windows 8 x64 with VMWare Workstation or inside ESXi

  - by Dommer

  I need to run several virtual machines on a core i7-920 box with 12GB or RAM and a 256GB SSD to host the VMs. It also has a Highpoint RocketRaid 2720SGL RAID controller with a 12TB RAID 5 array. I want one of my VMs to run Windows 8 x64, to have access to the RAID array as a native disk (not as networked drives and it needs to run at full speed) and to be able to send files quickly across the network. Initially I thought I'd try to do this using ESXi 5, but I have been unable to find any working RAID drivers for the RR2720SGL and it is not on the HCL for ESXi 5. In light of this, I have installed Windows 8 x64 on the hardware and am thinking of installing VMWare Workstation and running my VMs inside there. I guess my questions are these: How does VMWare Workstation 9 perform compared to ESXi 5? In the real world I mean? Presumably installing Win 8 as the host OS will give me way better performance for that Win 8 machine than Win 8 running under ESXi? I should stick with Windows 8 x64 as the host OS, right? If I install a domain controller VM inside my Win 8 box and join the Win 8 machine to that domain, am I insane (I would guess the Win 8 machine wouldn't see the domain controller until it finished starting everything up, but I don't think that matters)?! is it feasible to give metrics like this and if so, what is the likely value of x? 25%? 50%? 75%? Win 8 under ESXi runs x% as fast as Win 8 installed bare metal.

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• 100% CPU load on Ubuntu 10.04.3 LTS 64bit

  - by deadtired

  I have 2 days since I am trying to fix this issue, with no success. The server is a mysql database server. Hardware: DELL Poweredge 1950, 2x Intel Xeon Quad Core E5345 @ 2.33GHz, 16 Gb mem, 2x 146Gb SAS (software RAID1) Software: Ubuntu 10.04.3 LTS, MySQL 5.1.41 Issue: while mysql is not used and runs with no database, everything seems alright. As soon as I install a database, it has the reason to bring all 8 cores in 100% with low memory consumption. So, you can imagine the load average goes high (I saw 212 load average for the first time). The server doesn't become unresponsive, but you can see it's slow while browsing the project installed. Additional info: the database used is not more than 24MB and it was moved from a server with less resources and a lot more larger databases. So it's not the database/project. my.cnf is not a reason also, as I used both default one and the one I use on the same distribution on another server.What is interesting is that mysql doesn't close any process and runs to the limit of the max_connections. Logs are quiet. Nothing there. I switched to this Ubuntu version after I suspected some problems in the newly Ubuntu 11.10 server. This one worked alright for an hour after I made a kernel upgrade to 3.0.1 (it was using the memory also) I tested disk speed and seems alright. Some more output on the running server: dstat -cndymlp -N total -D total 3: htop command: Idea? Did anyone meet the same problem? Any fix you can think of?

  Read the article

• Apache2: Limit simultaneous requests & throttle bandwidth per IP/client?

  - by xentek

  I want to limit simultaneous requests & throttle bandwidth per IP/Client on a single apache vhost. In other words, I want to ensure that this site, which hosts large media files, doesn't get hammered by someone trying to download everything all at once (just happened the other night). I'd like to limit the outgoing transfer speed overall for this site, as well as limit the number of connections a single IP can make to the server to a sane default (i.e. within normal browser limits for multiple requests so page loads aren't effected too much). Bonus points if I can actually scope it to file types (i.e. leave web files alone, but apply these rules to just the media files). We're running Ubuntu 9.04 on all the servers, and have two apache/php servers being load balanced via Round Robin by a squid proxy server. MySQL is running on its own box as well. We've got plenty of bandwidth to give them, so I don't really want overall caps, but just want to throttle the amount of memory/CPU it takes to serve this site. There other sites on these servers that we don't want to apply these rules too, just want to keep this one from hogging all the resources. Let me know if you need more info! Thanks in advance for your suggestions!

  Read the article

• Where do vendors publish internal transfer rates of HDDs?

  - by red888

  So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

• Could hybrid SSD + HDD be made with fixed internal partitions?

  - by Aaron

  I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

  Read the article

• What are the replacement options for an IDE hard disk for a DOS based system?

  - by dummzeuch

  I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

  Read the article

• Accessing clearcase view drive from virtual machine is slow

  - by PermanentGuest

  I have a windows XP virtual machine running under a Windows XP host. On the host : On the host clearcase 7.1.1.2 is installed. I have a dynamic view mapped onto some drive. The view has certain VOB/directory structure where my application DLLs from the nightly build and config files are stored. I run my application on the host machine which uses the DLLs and config files from the VOB and everything runs smooth. Now I want to move this set-up to a virtual machine. On the guest : I'm running the guest with a vm-player. I don't want to install clear-case on this as I don't want to expose this machine onto the network. The network setting in the guest is 'host-only'. I have mapped the host's clearcase view drive as a shared folder and I'm able to access this drive from the virtual machine. Also, the application is running. However, the problem is that the access of the clearcase drive from the virtual machine is very slow. I can experience this from the windows explorer. Due to this, the starting of my application takes several seconds in the virtual machine while on the guest it comes up pretty fast. My question is : Is there any way to speed up the performance? I have managed to copy some of the DLLs which don't change frequently to the virtual machine to improve the performance. However, there are still lot of DLLs which have to be taken from the clearcase drive as they change frequently. VMplayer version is : VM Player 3.0.1 build-227600 Both guest and host is : Windows XP service pack 3 Host clearcase is : clearcase 7.1.1.2

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• Router vs switch in a LAN [closed]

  - by servernewbie

  If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a LAN (ONLY for a LAN, not to connect it to "the outside" WAN/internet/etc) I get a bit confused as to how it internally processes packets. I would first split this into two router scenarios: Router with buit-in switch In this scenario, I would expect that it will act exactly as a switch with a CAM table internally. This would probably benefit a bit in speed (guessing here?) compared to the next option. Router without built-in switch Here is where I get confused. If hostA wants to send a packet to hostB, it will ARP to find hostB's MAC address and send it there. Now, if we had a switch (above scenario) this would be easy. But how does it work now in a router WITHOUT a switch? If I would guess, hostA would send an Ethernet frame with hostB's MAC address to the line. The router would fetch the packet (even though the router has another MAC address, it would still fetch this packet even if it only contains hostB's MAC address). It would strip the Ethernet frame header and check the IP, and then check its own internal ARP table again for the MAC address. Now, this would seem like a waste of resources compared to a router with a built-in switch. But maybe it does not work like that at all. Does it also contain a CAM table? If that would be true, what would then the difference between these two routers really be?

  Read the article

• Disk usage on IIS, PHP5, performance problems.

  - by Jacob84

  Hi everybody, I'm quite worried with a performance problem that I'm facing in one of our production servers. I'm working for a hosting company, so you can imagine how heterogeneous the applications runnning here are. All started with a call of a client complaining about the speed loading a Joomla. The setup is IIS6 (Windows 2003) with PHP5 and FAST CGI wich normally works pretty well. I've tested the loading time and indeed, he was right. 7 or 8 seconds to load, when usually this can be accomplished in 2. Seeing this results, I started to check first CPU and RAM. Everithing normal, 2GB of RAM free, 3%-8% of CPU activity. That's what I call a relaxed server ;). Unfortunately, digging a little deeper I've found the 'PhysicalDisk' counters quite high (above 10), specially the read queues. I've used Process Explorer to see wich of those processes has the higher deltas, but everything seemed normal. As the problem is specially related to PHP pages, I've checked specific IIS counters, as Actual connections, Number of CGI requeriments and Number of ISAPI requeriments. CGI -> 3 to 7 ISAPI -> 5 to 9 Connections-> 90 to 120 (wich appears at the top of the graph) More than a solution (I know this is hard to find), I would like to know if you have an specifical methodology to face this kind of problems. Thanks a lot, as always.

  Read the article

• wireless router - configuring for low-latency, high traffic environment

  - by Mark C

  Hey all, I have a few questions about configuring a router to achieve low-latency, high speed throughput on a local area network that is not connected to the internet. I've read up on some stuff, but thought I would solicit some opinions here on what I've found and what I want to know.... Turn off SSID broadcast - it produces extraneous packets that all clients receive and reply (?) to. Not a huge deal, but it may help a bit. Mixed-mode off - I should attempt to have all devices using the same standard (e.g. 802.11n) and turn mixed-mode off. Any thoughts on security? Does having WEP or any of the WPA variants actually increase latency? Nothing super secure is going over this LAN so if turning security off made things better, that'd be cool. Any other thoughts or things to focus on to create the low latency environment I'm trying to go for would be great. Links to webpages and papers are also cool. I'm open to go through a bunch of stuff. Thanks in advance!

  Read the article

• Using wildcard domains to serve images without http blocking

  - by iopener

  I read that browsers sometimes block waiting for multiple images from the same host, and I'm trying to do everything I can to speed up page load times. One caveat: I need to serve files over HTTPS. Any opinions about whether this is feasible: Setup a wildcard cert for *.domain.com. Whenever I need an image, generate an number based on a hash mod 5 of the filename, and append it to an 'img' subdomain (eg img1.domain.com, img4.domain.com, img3.domain.com, etc.); the hash will make any filename always use the same subdomain, and therefore the browser should be able to cache the images Configure a dynamic virtualhost record to point all img#. subdomains to /var/www/img I am looking for feedback about this plan. My concerns are: Will I get warnings when my page has https:// links to multiple subdomains? Is the dynamic virtualhost record I'm talking about even possible? Considering the amount of processing this would require, is it likely to even produce any kind of overall benefit? I'm probably averaging a half-dozen images per page, with only half being changed on each page refresh. Thanks in advance for you feedback.

  Read the article

• Copying windows home server backup offsite

  - by Simon

  What ways are there to copy a windows home server backup to an offsite location? I'm talking specifically (and only) about the automated backup of my entire machine, and not the shared network folders. I am 90% working away from home on my laptop which has a 640GB drive so the shared folders are essentially useless to me. I backup every night, but if my house burns down or broken into the I'm in serious serious trouble ! I'm really looking for some alternative way to back up my entire machine - which much not interfere with the reliability or speed by which my WHS backs up my laptop every night. Either a way to 'export' a complete machine backup from the server, or recommendations on non-conflicting software I can backup to a 1TB drive at work are what I'm looking for. Note: I believe that WHS uses its own completely proprietary backup and doesn't use things like any 'backup bit' or 'archive bit'. I just dont want to install some other backup software that will conflict. PS I'm now running Windows 7 and just realized that I should probably check out the backup functionality it gives me. I assume that won't conflict right! Edit: Thanks for the hosted solutions. I'd also appreciate ways to backup to an 'offsite' location that I control - like my office vs. my home. The hosted solutions I think will be too slow or expensive for my needs.

  Read the article

• Synchronize two directories on linux pc

  - by Gab

  I need a distributed filesystem (or a synchronization tool) that is capable of keeping a directory synchronized across 4 pc. My requirements are: offline access (data must be available offline on each pc) preserve execution rights: some files are marked executable on a linux partition. This flag should be replicated. efficient sync strategy: some of my files are 20GB, they are changed quite often, but in very little parts (Virtualbox images). Delta transmissions are welcome. efficient handling of space: no history for files, files shouldn't be copied to temp directories "just in case you break it". it must propagate deletions of files modification can happen in any of the 4 pcs, they should be propagated when other pc are connected. Other specs of my solution are: Sync is over a lan, the total amount of data to be synced is around 180GB, in some ten thousand files. Changes are small, but can happen in big files. At the moment i'm interested in a linux only solution. conflicts either don't happen or are solved with "last one wins" I haven't found any good solution. I've been trying: unison: it is the only one working at the moment, but during the hashing phase it hangs my pc for some minute, disk light steady on. Sparkleshare doesn't handle large files nicely. It keeps an history of all your changes that grows up indefinitely. They promise it will be fixed in next releases, but at the moment it still doesn't fit my needs. owncloud (keeps history of each file i change) coda ? (help! i couldn't set it up correctly!) git-annex assistant transforms all your files in symlinks and mark the original file as read only ("just in case you make a mistake while you modify it"!). Before you edit a file you have to issue a special command "git-annex unlock", that creates a local copy of the file, and you have to remember to lock it again if you want it synchronized. What to try next?

  Read the article

• Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

  Read the article

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

  - by WannaBeAGeek

  I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

  Read the article

• UW-IMAP server, high load for one user

  - by Bruce Garlock

  We have been experiencing a very strange anomaly, with one specific user with our UW-IMAP server. We have about 75 users using the server, and one particular user, who is in about the middle as far as used storage keeps having issues with slow speed. Most of our users all use Thunderbird 2, or Thunderbird 3. Mostly 2, because of the performance issues we have had with 3. This user was on 3, and I downgraded him to 2. The performance has gotten better, but according to the imapd processes on the server, his username is using the most CPU % and CPU time. I've already done all the usual T/S'ing: Started profile from scratch, compacted folders, re-indexed, newer faster computer, etc.. Still, this users' imapd process is always using the most CPU on the server. For troubleshooting, we setup another user which has more usage, folders, etc.. than he does, but we don't see the users process taking up most of the CPU with the imapd process. So, it almost sounds like a particular email may be the culprit, but how can we find it, if thats the problem? This has been going on for a while, and he is a management person, so his patience is about to end. Does anyone have any ideas?

  Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >