Search Results

Search found 9338 results on 374 pages for 'fedora 15'.

Page 303/374 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

  • PC freezing when used to print labels

    - by Will
    Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

    Read the article

  • Too many TIME_WAIT state connections!

    - by Hamza
    I've been reading about this everywhere all day, and from what I've gathered, TIME_WAIT is a relatively harmless state. It's supposed to be harmless even when there's too many. But if they're jumping to the numbers I've been seeing for the past 24 hours, something is really wrong! [root@1 ~]# netstat -nat | awk '{print $6}' | sort | uniq -c | sort -n 1 established) 1 Foreign 12 CLOSE_WAIT 15 LISTEN 64 LAST_ACK 201 FIN_WAIT2 334 CLOSING 605 ESTABLISHED 816 SYN_RECV 981 FIN_WAIT1 26830 TIME_WAIT That number fluctuates from 20,000 to 30,000+ (so far, the maximum I've seen it go is 32,000). What worries me is that they're all different IP addresses from all sorts of random locations. Now this is supposed to be (or was supposed to be) a DDoS attack. I know this for a fact, but I won't go into the boring details. It started out as a DDoS and it did impact my server's performance for a couple minutes. After that, everything was back to normal. My server load is normal. My internet traffic is normal. No server resource is being abused. My sites load fine. I also have IPTABLES disabled. There's an odd issue with that too. Every time I enable the firewall/iptables, my server starts experiencing packet loss. Lots of it. About 50%-60% packets are lost. It happens within an hour or within a few hours of enabling the firewall. As soon as I disable it, ping responses from all locations I test them from start clearing up and get stable again. Very strange. The TIME_WAIT state connections have been fluctuating at those numbers since yesterday. For 24 hours now, I've had that, and although it hasn't impacted performance in any way, it's disturbing enough. My current tcp_fin_timeout value is 30 seconds, from the default 60 seconds. However, that seems to not help, at all. Any ideas, suggestions? Anything at all would be appreciated, really!

    Read the article

  • usb_modeswitch not switching

    - by deniz
    After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

    Read the article

  • Problems when trying to connect to a router wirelessly

    - by Ruud Lenders
    The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

    Read the article

  • Windows 8 ignores more specific route

    - by Lander
    OS: Windows 8 I have a cabled NIC (connected to router with ip 192.168.1.0) and a WIFI NIC (connected to a router with ip 192.168.1.1) . I want all traffic to go through the cabled NIC, except the 192.168.1.0/8 range should use the wifi-nic. This was working fine in Windows 7, without any manual configuration. In Windows 8 however, it's not. My routing table: =========================================================================== Interface List 14...f2 7b cb 13 e7 f0 ......Microsoft Wi-Fi Direct Virtual Adapter 13...b8 ac 6f 54 d2 5c ......Realtek PCIe FE Family Controller 12...f0 7b cb 13 e7 f0 ......Dell Wireless 1397 WLAN Mini-Card 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.198 30 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.233 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.233 276 192.168.0.233 255.255.255.255 On-link 192.168.0.233 276 192.168.0.255 255.255.255.255 On-link 192.168.0.233 276 192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.198 31 192.168.1.198 255.255.255.255 On-link 192.168.1.198 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.233 276 224.0.0.0 240.0.0.0 On-link 192.168.1.198 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.233 276 255.255.255.255 255.255.255.255 On-link 192.168.1.198 286 =========================================================================== Persistent Routes: None I added the rule for 192.168.1.0. I would think Windows should use this rule for the IP 192.168.1.1 because it's more specific than the default-route. However it's not: C:\Windows\system32>tracert 192.168.1.1 Tracing route to 192.168.1.1 over a maximum of 30 hops 1 58 ms 4 ms 4 ms 192.168.0.1 2 68 ms 12 ms 11 ms ^C So... What do I do wrong? And how can I make Windows use the wireless NIC for 192.168.1.0/8

    Read the article

  • Sendmail smtp-auth issues

    - by SlackO
    I'm running into a problem with Sendmail trying to implement SMTP- auth. I"m running 8.14.5 and have saslauthd running under FreeBSD 7.0-R. I don't believe I have starttls enabled (but I also compiled a version with it and have been testing it too - same problem) - just looking for basic auth, but am wondering if my configuration is not compatible with modern mail clients? I don't think I have any certs set up. It seems an older version of Microsoft Outlook Express works fine with SMTP-auth with no problems, but Outlook 2010 won't work, and neither will Eudora (basic settings to not use encryption and use same uid/pw as pop3 account name) When trying to send mail the server reports: "550 571 Relaying Denied. Proper authentication required." Is there some config that I am missing? Why does it work with Outlook Express but not other e-mail clients? my site.config.m4 has: APPENDDEF(confENVDEF',-DSASL=2') APPENDDEF(conf_sendmail_LIBS',-lsasl2') dnl APPENDDEF(confLIBDIRS',-L/usr/local/lib/sasl2') APPENDDEF(confLIBDIRS',-L/usr/local/lib') APPENDDEF(confINCDIRS',-I/usr/local/include') My sendmail.mc has: define(ConfAUTH_OPTIONS',A') TRUST_AUTH_MECH(LOGIN PLAIN')dnl define(ConfAUTH_MECHANISMS',`LOGIN PLAIN')dnl My /usr/local/lib/sasl2/Sendmail.conf has: pwcheck_method: saslauthd When I restart sendmail this shows up in the logs: Jun 16 12:36:24 x sm-mta[79090]: restarting /usr/sbin/sendmail due to signal Jun 16 12:36:24 x sm-mta[81145]: starting daemon (8.14.5): SMTP+queueing@00:30:00 Jun 16 12:36:24 x sm-mta[81147]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jun 16 12:36:24 x sm-mta[81148]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 testing on the cmd line: telnet localhost 587 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 xxxt ESMTP Sendmail 8.14.5/8.14.5; Fri, 15 Jun 2012 18:28:03 -0500 (CDT) ehlo localhost 250-xxxx Hello localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP I am not using any certs or ssl right now - just trying to get basic auth to work. Anyone have any ideas?

    Read the article

  • Windows Server 2008 Migration - Did I miss something?

    - by DevNULL
    I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

    Read the article

  • My hosting server giving memory allocation error

    - by Usman
    I have hosted my website on shared hosting linux server. As there are atmost 10-15 visitors come to my website daily but My wordpress website most of the times gives 500 Internal Server Error. I accessed my server Error Log following error is showing: [Tue Dec 04 08:57:45 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:45 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:43 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:43 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:42 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:42 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:41 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:41 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:40 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:40 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:32 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:31 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:29 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:29 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php [Tue Dec 04 08:57:26 2012] [error] [client 117.205.74.227] (12)Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp for /home/grasphub/public_html/index.php Is my hosting service really bad. And any solution. Thanks in advance.

    Read the article

  • "Error 1067: The process terminated unexpectedly" when trying to install MySQL on Win7 x64.

    - by Gravitas
    Hi, I've run into a brick wall trying to install MySQL v5.5 on my machine. My PC is Windows 7 x64, Enterprise edition. MySQL installs fine, but when I run the "MySQL Instance Configuration Wizard", it pauses forever on the step "Start Service" (I can let it run for 30 minutes with no response). If I go into services, I see that the "MySQL" service hasn't started, and if I try to start it, it says "Windows could not start MySQL Service on Local Computer. Error 1067: The process terminated unexpectedly." I've tried the following: Turning off firewall. Uninstalling all antivirus software. Installing / reinstalling 32-bit version of MySQL. Installing / reinstalling 64-bit version of MySQL. Uninstalling, deleting the contents of "C:\program files\MySQL" and "C:\program files (x86)\MySQL", reinstalling. Checking to see that there is no rogue services named MySQL???? (from a previous install). Checking that port 3306 is not used by an alternate program. Changing the default port that MySQL uses. Checking for "my.ini" and "my.ini.cnf" in "C:\windows" (nothing there but that can cause a problem). Running both MySQL installer, and configuration wizard, in "Adminstrator mode". Turning off UAC. Installing with defaults, not changing anything. Rebooting my machine (about 6 reboots so far). Opening up port 3306 in the firewall (both TCP and UDP, inbound and outbound). Swearing at the klutz of a programmer who designed MySQL so you can't even install it (as if that would help!) My machine is working 100% in every other way. InfiniDB (a MySQL compatible database) installs 100%, as does Visual Studio 2010, Microsoft SQL Server, etc, etc. Your advice on how to work around this? p.s. Here is the screen it got stuck on for 15 minutes until I killed the process: Update 2010-12-20 Tried MySQL v5.1, it didn't work either. Its amazing - if you type "mysqld /?", or "mysqld -help", it doesn't give you any help. And, if you try to restart the service manually, it doesn't display any error messages. Could it be any more unhelpful? Update 2010-12-21 Installed MySQL 6.0 alpha, and it worked. However, I'd rather not use an alpha release, given that the "stable" release is anything but :( Update 2010-12-21 Found http://dev.mysql.com/doc/refman/5.1/en/windows-troubleshooting.html, dealing with troubleshooting under Windows. Discovered that you can generate an error log if the service doesn't start - see here: http://dev.mysql.com/doc/refman/5.1/en/error-log.html

    Read the article

  • iptables management tools for large scale environment

    - by womble
    The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

    Read the article

  • Command-line connect to wired network for Ubuntu

    - by Tim
    I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

    Read the article

  • debian gateway using iptables

    - by meijuh
    I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

    Read the article

  • dd-wrt router firmware QoS troubleshooting

    - by Jeff Atwood
    I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

    Read the article

  • Apache server completely freezes until it gets restarted

    - by nbv4
    My server does this every few days. What sucks is that it always seems to do this right after I go to bed, so when I wake up, I'm greeted with the fact that my server has been down for the past 6 or 7 hours. When I first noticed this, I added a cronjob that tries to restart the server every 15 minutes, but I guess that didn't fix it. Once I noticed the server was down, I can this command: /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting ...........................................................apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName httpd (pid 17597) already running ...which is odd, because a restart should restart the server, even if it's already running, correct? I eventually had to "stop" then "start" to get it working again. I then looked through the logs, and found something very weird. It seems that around the time the server crashed, the logs have entries that are wildly out of order. It looks a little like this: xx.xxx.xxx.x - - [21/Apr/2010:06:32:05 -0400] "GET / blah" xx.xxx.xxx.x - - [21/Apr/2010:06:51:25 -0400] "GET / blah" x.xx.xxx.xxx - - [21/Apr/2010:06:38:23 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:31:56 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:51:49 -0400] "GET / blah" xx.xx.xxx.xx - - [21/Apr/2010:06:33:20 -0400] "GET / blah" I don't think the problem is memory, because this: tells me that right before the crash, memory usage is fine. I'm running apache with the worker mpm, here are the settings for that: <IfModule mpm_worker_module> StartServers 1 MaxClients 100 MinSpareThreads 5 MaxSpareThreads 10 ThreadsPerChild 10 MaxRequestsPerChild 3000 </IfModule> This apache server is running a bunch of stuff, but most of the traffic comes from a django project I'm hosting, that uses mod_wsgi. There also is a simple machines forum that is running off of mod_fcgid. Those setting are below: <IfModule mod_fcgid.c> MaxRequestsPerProcess 500 MaxProcessCount 3 AddHandler fcgid-script .php .fcgi AddHandler cgi-script .cgi .pl FCGIWrapper "/usr/bin/php-cgi" .php </IfModule> Anyone know of anything else I can check? I've just about tweaked every single setting I can think of, yet these freezes still happen.

    Read the article

  • Apple font question

    - by creocare
    So I just bought a new macbook pro 15'. This is my first mac. I really hate the apple font in dreamweaver or when I'm doing any kind of coding. I can't read it. I should buy glasses but in the mean time is there any way to change the font and font size of dreamweaver? Thanks.

    Read the article

  • Php 5.3.3. Access log

    - by irolla
    Hi I'm using php-fpm. In 5.3.2 when I'm opening phpinfo page in access log I get: ip - - [26/Aug/2010:16:35:32 +0400] "GET /phpinfo.php HTTP/1.1" 200 13322 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" But in 5.3.3 I'm getting: ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php HTTP/1.1" 200 11891 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42 HTTP/1.1" 200 2536 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=SUHO8567F54-D428-14d2-A769-00DA302A5F18 HTTP/1.1" 200 2825 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" ip - - [26/Aug/2010:16:30:30 +0400] "GET /phpinfo.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42 HTTP/1.1" 200 2158 "http://site.com/phpinfo.php" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5" Why there is 4 lines insted of 1? And what means "?=PHPE...". Is it PHP sessions? My php5.3.3 fpm config: [global] pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log log_level = notice [pool_0] listen = 127.0.0.1:9000 listen.backlog = -1 listen.allowed_clients = 127.0.0.1 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 pm.status_path = /pool_0/status rlimit_files = 1024 rlimit_core = 0 catch_workers_output = yes php_admin_flag[register_globals] = true php_admin_value[error_reporting] = E_ALL & ~E_DEPRECATED php_admin_value[max_execution_time] = 15 php_admin_flag[short_open_tag] = true php_admin_flag[display_errors] = false

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • How can I force all internet traffic over a PPTP VPN but still allow local lan access?

    - by user126715
    I have a server running Linux Mint 12 that I want to keep connected to a PPTP VPN all the time. The VPN server is pretty reliable, but it drops on occasion so I just want to make it so all internet activity is disabled if the VPN connection is broken. I'd also like to figure out a way to restart it automatically, but that's not as big of an issue since this happens pretty rarely. I also want to always be able to connect to the box from my lan, regardless of whether the VPN is up or not. Here's what my ifconfig looks like with the VPN connected properly: eth0 Link encap:Ethernet HWaddr 00:22:15:21:59:9a inet addr:192.168.0.171 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:15ff:fe21:599a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37389 errors:0 dropped:0 overruns:0 frame:0 TX packets:29028 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37781384 (37.7 MB) TX bytes:19281394 (19.2 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1446 errors:0 dropped:0 overruns:0 frame:0 TX packets:1446 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472178 (472.1 KB) TX bytes:472178 (472.1 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.10.11.10 P-t-P:10.10.11.9 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1368 (1.3 KB) TX bytes:1812 (1.8 KB) Here's an iptables script I found elsewhere that seemed to be for the problem I'm trying to solve, but it wound up blocking all access, but I'm not sure what I need to change: #!/bin/bash #Set variables IPT=/sbin/iptables VPN=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` LAN=192.168.0.0/24 #Flush rules $IPT -F $IPT -X #Default policies and define chains $IPT -P OUTPUT DROP $IPT -P INPUT DROP $IPT -P FORWARD DROP #Allow input from LAN and tun0 ONLY $IPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A INPUT -i lo -j ACCEPT $IPT -A INPUT -i tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -s $LAN -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -j DROP #Allow output from lo and tun0 ONLY $IPT -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A OUTPUT -o tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -d $VPN -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -j DROP exit 0 Thanks for your help.

    Read the article

  • UCARP: prevent the original master from taking over the VIP when it comes back after failure?

    - by quanta
    Keepalived can do this by combining the nopreempt option and the BACKUP state on the both nodes: Prevent VRRP Master from becoming Master once it has failed Prevent master to fall back to master after failure How about the UCARP? Name : ucarp Arch : x86_64 Version : 1.5.2 Release : 1.el5.rf Size : 81 k Repo : installed Summary : Common Address Redundancy Protocol (CARP) for Unix URL : http://www.ucarp.org/ License : BSD Description: UCARP allows a couple of hosts to share common virtual IP addresses in order : to provide automatic failover. It is a portable userland implementation of the : secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's : alternative to the patents-bloated VRRP). : Strong points of the CARP protocol are: very low overhead, cryptographically : signed messages, interoperability between different operating systems and no : need for any dedicated extra network link between redundant hosts. If I don't use the --preempt option and set the --advskew to the same value, both nodes become master. /etc/sysconfig/carp/vip-010.conf # Virtual IP configuration file for UCARP # The number (from 001 to 255) in the name of the file is the identifier # $Id: vip-001.conf.example 1527 2004-07-09 15:23:54Z dude $ # Set the same password on all mamchines sharing the same virtual IP PASSWORD="pa$$w0rd" # You are required to have an IPADDR= line in the configuration file for # this interface (so no DHCP allowed) BIND_INTERFACE="eth0" # Do *NOT* use a main interface for the virtual IP, use an ethX:Y alias # with the corresponding /etc/sysconfig/network-scripts/ifcfg-ethX:Y file # already configured and ith ONBOOT=no VIP_INTERFACE="eth0:0" # If you have extra options to add, see "ucarp --help" output # (the lower the "-k <val>" the higher priority and "-P" to become master ASAP) OPTIONS="-z -k 255" /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 ONBOOT=no BOOTPROTO= IPADDR=192.168.6.8 NETMASK=255.255.255.0 USERCTL=yes IPV6INIT=no node 1: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether c6:9b:8e:af:a7:69 brd ff:ff:ff:ff:ff:ff inet 192.168.6.192/24 brd 192.168.6.255 scope global eth0 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth0:0 inet6 fe80::c49b:8eff:feaf:a769/64 scope link valid_lft forever preferred_lft forever node 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:f7:0f:81 brd ff:ff:ff:ff:ff:ff inet 192.168.6.38/24 brd 192.168.6.255 scope global eth1 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth1:0 inet6 fe80::230:48ff:fef7:f81/64 scope link valid_lft forever preferred_lft forever

    Read the article

  • High load on X3220 Quad Core Linux Apache server

    - by John Templar
    I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

    Read the article

  • Nginx Proxying to Multiple IP Addresses for CMS' Website Preview

    - by Matthew Borgman
    First-time poster, so bear with me. I'm relatively new to Nginx, but have managed to figure out what I've needed... until now. Nginx v1.0.15 is proxying to PHP-FPM v.5.3.10, which is listening at http://127.0.0.1:9000. [Knock on wood] everything has been running smoothly in terms of hosting our CMS and many websites. Now, we've developed our CMS and configured Nginx such that each supported website has a preview URL (e.g. http://[WebsiteID].ourcms.com/) where the site can be, you guessed it, previewed in those situations where DNS doesn't yet resolve to our server, etc. Specifically, we use Nginx's Map module (http://wiki.nginx.org/HttpMapModule) and a regular expression in the server_name of the CMS' server{ } block to 1) lookup a website's primary domain name from its preview URL and then 2) forward the request to the "matched" primary domain. The corresponding Nginx configuration: map $host $h { 123.ourcms.com www.example1.com; 456.ourcms.com www.example2.com; 789.ourcms.com www.example3.com; } and server { listen [OurCMSIPAddress]:80; listen [OurCMSIPAddress]:443 ssl; root /var/www/ourcms.com; server_name ~^(.*)\.ourcms\.com$; ssl_certificate /etc/nginx/conf.d/ourcms.com.chained.crt; ssl_certificate_key /etc/nginx/conf.d/ourcms.com.key; location / { proxy_pass http://127.0.0.1/; proxy_set_header Host $h; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } (Note: I do realize that the regex in the server_name should be "tighter" for security reasons and match only the format of the website ID (i.e. a UUID in our case).) This configuration works for 99% of our sites... except those that have a dedicated IP address for an installed SSL certificate. A "502 Bad Gateway" is returned for these and I'm unsure as to why. This is how I think the current configuration works for any requests that match the regex (e.g. http://123.ourcms.com/): Nginx looks up the website's primary domain from the mapping, and as a result of the proxy_pass http://127.0.0.1 directive, passes the request back to Nginx itself, which since the proxied request has a hostname corresponding to the website's primary domain name, via the proxy_set_header Host $h directive, Nginx handles the request as if it was as direct request for that hostname. Please correct me if I'm wrong in this understanding. Should I be proxying to those website's dedicated IP addresses? I tried this, but it didn't seem to work? Is there a setting in the Proxy module that I'm missing? Thanks for the help. MB

    Read the article

  • Need an excel macro to produce a formatted text file

    - by user139238
    I am just learning how to make macros and I found a macro that nearly does what I need it to do, which is output a text file from Excel. What I need it to do is output this in a .mhd format, which I have done, and then take all the data written in the #fnum cells and place a return after each in the Excel file. Essentially I just need all the data to have their a specific line in the text file. I am certain there is an elegant way to go about this, but I can't seem to get it. Sub CreateFile() Do While Not IsEmpty(ActiveCell.Offset(0, 1)) MyFile = ActiveCell.Value & ".mhd" 'set and open file for output fnum = FreeFile() Open MyFile For Output As fnum 'use Print when you want the string without quotation marks Print #fnum, ActiveCell.Offset(0, 5); " " & ActiveCell.Offset(0, 6); " " & ActiveCell.Offset(0, 7); " " & ActiveCell.Offset(0, 8); " " & ActiveCell.Offset(0, 9); " " & ActiveCell.Offset(0, 10); " " & ActiveCell.Offset(0, 11); " " & ActiveCell.Offset(0, 12); " " & ActiveCell.Offset(0, 13); " " & ActiveCell.Offset(0, 14); " " & ActiveCell.Offset(0, 15); " " & ActiveCell.Offset(0, 16); " " & ActiveCell.Offset(0, 17); " " & ActiveCell.Offset(0, 18); " " & ActiveCell.Offset(0, 19); " " & ActiveCell.Offset(0, 20); " " & ActiveCell.Offset(0, 21); " " & ActiveCell.Offset(0, 22); " " & ActiveCell.Offset(0, 23); " " & ActiveCell.Offset(0, 24); " " & ActiveCell.Offset(0, 25); " " & ActiveCell.Offset(0, 26) Close #fnum ActiveCell.Offset(1, 0).Select Loop End Sub

    Read the article

  • OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

    - by ani
    I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

    Read the article

  • PSU failing or Mainboard failing?

    - by Andrei Rinea
    I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

    Read the article

  • Has anyone achieved true differential sync with rsync in ESXi?

    - by Julius
    Berate me later on the fact that I'm using the service console to do anything in ESXi... I've got a working rsync binary (v3.0.4) that I can use in ESXi 4.1U1. I tend to use rsync over cp when copying VM's or backups from one local datastore to another local datastore. I've used rsync to copy data from one ESXi box to another but that was just for small files. In now trying to do true differential syncs of backups taken via ghettoVCB between my primary ESXi machine and a secondary one. But even when I do this locally (one datastore to another datastore on the same ESXi machine) rsync appears to copy the files in their entirety. I've got two VMDK's totally 80GB in size, and rsync still takes anywhere between 1 and 2 hours but the VMDK's aren't growing that much daily. Below is the rsync command I'm executing. I am copying locally because ultimately these files will get copied onto a datastore created from a LUN on a remote system. Its not an rsync that'll be serviced by an rsync daemon on a remote system. rsync -avPSI VMBACKUP_2011-06-10_02-27-56/* VMBACKUP_2011-06-01_06-37-11/ --stats --itemize-changes --existing --modify-window=2 --no-whole-file sending incremental file list >f..t...... VM-flat.vmdk 42949672960 100% 15.06MB/s 0:45:20 (xfer#1, to-check=5/6) >f..t...... VM.vmdk 556 100% 4.24kB/s 0:00:00 (xfer#2, to-check=4/6) >f..t...... VM.vmx 3327 100% 25.19kB/s 0:00:00 (xfer#3, to-check=3/6) >f..t...... VM_1-flat.vmdk 42949672960 100% 12.19MB/s 0:56:01 (xfer#4, to-check=2/6) >f..t...... VM_1.vmdk 558 100% 2.51kB/s 0:00:00 (xfer#5, to-check=1/6) >f..t...... STATUS.ok 30 100% 0.02kB/s 0:00:01 (xfer#6, to-check=0/6) Number of files: 6 Number of files transferred: 6 Total file size: 85899350391 bytes Total transferred file size: 85899350391 bytes Literal data: 2429682778 bytes Matched data: 83469667613 bytes File list size: 129 File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 2432530094 Total bytes received: 5243054 sent 2432530094 bytes received 5243054 bytes 295648.92 bytes/sec total size is 85899350391 speedup is 35.24 Is this because ESXi is itself making so many changes to the VMDK's that as far as rsync is concerned the entire file has to be retransmitted? Has anyone actually achieved actual diff sync with ESXi?

    Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >