Search Results

Search found 52182 results on 2088 pages for 'something for the weekend'.

Page 305/2088 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• SSH session closing whilst virtualenv session stays open (I think)

  - by ing0

  I've been developing some sites using Flask recently (running on debian within a virtualenv), and when I am testing I can run it on a port, let's say post 5000. So I run the script like so: . env/bin/activate <- go into virtual environment python file.py <- run python script And I will be given this message: Running on http://0.0.0.0:5000/ So this all works great and I can access my site on this port fine. However... my rubbish ISP always does this thing where it resets something around 1am every morning. I have no idea what this is, everything runs like normal but I always get disconnected from any SSH sessions open. This leaves it running and all I can do is call: lsof -i Which will show me the process but if I kill it and then rerun it things get weird. The: Running on http://0.0.0.0:5000 message still shows but I cannot connect to it anymore. I've tried changing the port number and it seems the only thing that works is trying again later on or on another day. Now I'm assuming that something on my server resets inbetween these times and I would like to think it was maybe that virtualenv session timing out, but I cannot find out how to do this manually, does anyone know?

  Read the article

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

• Managing Many External Hosts Using EC2 and Route 53

  - by futureal

  Looking for a "best practice" answer to managing externally-addressable hosts using the combination of Amazon EC2 and Amazon Route 53, without using Elastic IPs for each host. In my scenario I will have 30+ hosts that need to be accessible from outside EC2, so directly using internal DNS will not work. In the past, I have addressed hosts by assigning an elastic IP to that host (let's say, 55.55.55.55) and then creating an associated A record. For example, let's say I want to create "ec2-corp01.mydomain.com" I might do: ec2-corp01.mydomain.com. A 55.55.55.55 300 Then on that EC2 instance, I would assign the Elastic IP of 55.55.55.55, and everything works fine. Of course, to make this work, I need to have one Elastic IP per instance, which is something I'd like to avoid if possible; I'd like the infrastructure to be more dynamic. So my thought is to try something like: Create a script that queries the internal EC2 tools to determine an instance's private hostname On instance boot, call that script to determine its hostname, and then using the command-line Route 53 interface to find and update that hostname to its current internal hostname Since the host will have a relatively low TTL (let's say 300 as above, or 5 minutes) it should take effect pretty quickly Is this a good idea? Is there a better or more widely accepted way to handle it? If it IS a good idea, what type of record should I be creating? A CNAME that points to the internal host, like ec2-55-55-55-55.compute-1.amazonaws.com? Is an A record better or worse? Thanks!

  Read the article

• What's hogging my CPU?

  - by endolith

  Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. I try killing lots of things, but it continues at 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, that normally only hits 100% CPU when I'm doing something that requires it (like loading 32 Firefox tabs) after which it goes back to a normal idle level. It's not a new install or anything. It shouldn't be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing any process I saw active again, and killing vino-server finally fixed the problem, even though it never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). How did it manage to use 100% CPU while top only showed it as 5% or so? How do I identify the culprit in the future? Looks like I'm not the only one: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

  Read the article

• Exitus Acta Probat: The Post-Processing Module

  - by Phil Factor

  Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of  the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that  Unix programmers were excitable creatures who were prone to  indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds  in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet.  They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

  Read the article

• Backing up VMs to a tape drive

  - by Aljoscha Vollmerhaus

  I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

  Read the article

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• How can I stream audio signals from various devices/computers to my home server?

  - by Breakthrough

  I currently have a headless home server set up (running Ubuntu 12.04 server edition) running a simple Apache HTTP server. The server is near an audio receiver, which controls a set of indoor and outdoor speakers in my home. Recently, my father purchased a Bluetooth adapter, which our various laptops and cellphones can connect to, outputting the music to the speakers. I was hoping to find a solution that worked over Wi-Fi, namely because it won't cost anything (I already have a server with an audio card), and it doesn't depend on Bluetooth. Is there any cross-platform (preferably free and open-source) solution that I can use which will allow me to stream audio to my home server, over my home network, from a wide variety of devices (laptops running Windows/Linux or cellphones running Android/BB/iOS)? I need something that works at least with Windows and Android. Also, just to clairfy, I want something that simply allows devices to connect to my server and output an audio signal without any action on the server end (since it's a server hidden away near my receiver). Any subsequent connection attempt should be dropped, so only one device can be in control of the stereo at once.

  Read the article

• How to increase wifi speed for laptops

  - by sagar

  Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Why won't Google Chrome install on my Windows 7?

  - by quakkels

  I can tell something is wrong with my computer. A little history: Google Chrome was not running correctly. When i was using facebook, any link on face that ran an ajax javascript function would not work. No error was being thrown, it just wasn't working. I uninstalled Chrome and reinstalled it. On re-install, a toolbar automatically installed with Chrome. BitTorrentBar. I did not install BitTorrentBar, it installed on it's own. Bad. When BitTorrentBar was active, then ajax functions on facebook worked. When I deactivated or uninstalled BittorrentBar from Chrome extensions, then ajax stopped working. I ran scanned the computer with Avast (free version) and SpyBot Search and Destroy (also free). They found nothing wrong. I uninstalled Chrome using Control Panel and then I went through my file system deleting anything that had "google", "BitTorrent", "chrome", or "conduit". Conduit seems to distribute BitTorrentBar. After doing all that, I tried to reinstall Chrome. I got this error: System.ComponentModel.Win32Exception: The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at ClickOnceBootStrap.ClickOnceEntry.Main() This error interupts the Chrome install every time! computer scans don't show anything wrong. So then, I thought this might be a .net framework error. Perhaps I deleted something I wasn't supposed to. So I reinstalled .NET Framework 4 and checked the repair option. I also ran Windows Updates. When I tried to download Chrome, again I got the same error as listed above. What should I do?

  Read the article

• Wireless access point -> Powerline -> Router -> Internet, should this work?

  - by Anthony

  My network at home used to be a laptop and desktop connected wirelessly to a single Wireless ADSL router, a Cisco 877W. Wireless reception around the house with this setup was quite unreliable, so I've gone about looking to improve it. I purchased some Belkin Gigabit powerline adapters and I've got these working fine. I can hook a computer up to one of the powerline adapters, and with the other one plugged into the ADSL router the computer has internet access. Additionally I can hook a Netgear DG834G Wireless ADSL router into it with the adsl not plugged in, and after turning off DHCP can RJ45 a computer up to the network. Everything works fine. However, if I setup a wireless network on the Netgear then any computer that connects wirelessly to it cannot access the internet. It gets an IP address very slowly via DHCP which is a good one, but it cannot access the internet. It can however communicate with the RJ45'd computer also connected to the Netgear. I wondered whether this could be a problem with the Netgear so I've borrowed a Cisco Aironet 1200 and got this working fine when it's attached directly to the primary ADSL router. I can connect to it wireless and get onto the internet. However, if I then plug it into the Netgear I can communicate with other devices attached to the Netgear, but can't get any further than the Netgear. All the while though the other devices RJ45'd to the Netgear are communicating with the internet just fine. I'm starting to suspect it's one of two things causing the problem: 1) For some reason the belkin powerline adapters don't like carrying wireless-originating signals. Could this be possible? 2) The primary Cisco ADSL router doesn't want to communicate with other devices on my network more than one hop away from it. I'm making an assumption here that within the Netgear box the wireless and wired sides are handled differently. Could this be true? Has anyone successfully setup something similar to what I'm trying, with a wireless device on the otherside of a pair of powerline connectors? Update 06/07/2010 - Response to irrational John 28 June Thanks for the answer John - and for clearing up some of my questions. The model number of the belkin powerline adapters are F5D4076. Security was apparently enabled by default on them, and I didn't change them from their default setting. The network diagram in your answer shows exactly what I'm trying to setup: I've followed that guide and I'm still not able to get things working properly. The thing that perplexes me is that wired network traffic works just fine - it's only the wireless traffic that doesn't. This is with the same laptop, and the same DHCP or static IPs. "1. What IP addresses did you assign to each router? What subnet masks are you using?" - subnet is 255.255.255.0, the router connected to the adsl is 192.168.153.1 and that has the DHCP server. The access point on the other side of the powerline adapters I've tried both a static IP of 192.168.153.110, same subnet, and a DHCP-assigned IP. The other devices are DHCP, although I also tried manually entering IP settings. "2. Have you correctly enabled DHCP on only one of the routers and disabled it on all the others?" Yes I have - only the internet-connected router has DHCP enabled. The IP range for the DHCP is from 192.168.153.11 - 192.168.153.200. The strange thing is that wired connections work fine on the LAN, plugged into any router, work fine - it's only the wireless connections that aren't working when they're plugged into the non-primary AP. "Since the routers you are using appear to integrate an ADSL modem I'm assuming there is no WAN port on them." There's no NAT within the LAN, and all wired connections are connected to LAN ports. It's something wrong with the wireless - wired works fine throughout the whole LAN. Update 06/07/2010 - Response to irrational John 29 June The diagram you've drawn in your answer shows pretty much exactly what I'm trying to do. I've spent another evening trying different things and made some progress but I'm still scratching my head. I've borrowed a Netgear access point and been trying with this, and the strange thing is that my PC is working now - this is a Windows 7 PC connected to the access point in the position of where the DG834G is in the diagram. Meanwhile, however, I have an old Powerbook G4 12" I use for music, and while that has a DHCP-assigned IP address, it's not getting any network throughput to either LAN or internet addresses. To make matters more strange, my phone appears to be intermittently working when it's on the wifi. The access point is a Netgear WPN802v1, DHCP, NAT both switched off, running firmware 2.0.9.0. Last night I set it up with exactly the same settings, and similar to tonight I could get a couple of devices to work, and a couple not to. By the morning, however, everything had stopped working - nothing could get a DHCP IP address. I rebooted the 877W earlier this evening and I'm wondering whether this is why a few things are working now. "Could it be possible that the issue could be with the 877W?" I didn't configure this - is it possible that the DHCP server only likes assigning devices that are immediately attached to it? Or similar, could a firewall be stopping too many addresses that are coming through one device? (ie. the Access Point) This could explain why devices are working at the start but then not by the end. In reply to your questions, "1. I looked at the Netgear DG834G support page. There are five versions of this router. Which version do you have? Netgear usually lists this on the label on the bottom of the router. What version of the firmware does it have?" It's a DG834Gv3, and the firmware is the last on the netgear site version 4.01.40. "3. Not knowing which version you have, I glanced at the reference manual for the DG834G v3. In the section for Wireless Settings under the subsection Wireless Access Point there is a check box for a Wireless Isolation setting. If you have this setting it should be off/unchecked. If it is checked then any device connected via wireless would not be able to talk to any other device on the LAN. This sounds like your problem so maybe this is the cause?" I've checked this and it's switched off. I've made a change to the IP of the access point to something outside the DHCP range - it's now 192.158.153.5, with DHCP starting at 11 and going up to 254. Thanks for the tip about this - I only have a few devices so wouldn't anticipate the DHCP server assigning up to 110, but better safe than sorry. Finally one more thing I thought I should add, is with the Powerbook G4 that's not working - it's getting a DHCP IP address and it can communicate with the WPN802 as I can visit the administration page. Anything further than this, however, it can't reach; I can't administrate the 192.168.153.1 (877W router). Strangely, however, when I open Finder on the same powerbook it's detecting my NAS which is attached directly via wire to the 877W. If I try to browse it, it says connection failed. RE: "Perhaps the problem with your Powerbook is with DNS?.." The IP settings on the powerbook are identical to that of the PC with the exception of the IP address; the PC is 192.168.153.17 and the powerbook is 192.168.153.12. Subnets are the same, 255.255.255.0 and default gateway is the same, .1, and the DNS servers are the same. I administrate the 877W by going to 192.168.153.1 in the browser. This is what isn't working from the Powerbook, despite the PC working fine when I do the same. Meanwhile, however, I can administrate the AP on 192.168.153.5 from both PC and Powerbook Update 06/07/2010 - FINAL RESOLUTION of sorts: First off, sorry for the length of this question. I need start to practice a more concise writing style, so I'm going to try to keep this bit brief. After much fiddling, and with the hugely-appreciated help of irrational John, I have come to the conclusion that it's something wrong with the powerbook. I believe that this was perhaps the reason I doubted things worked at the very beginning. I now have the original DG834Gv3 running both wirelessly and wired, and both wired devices and wireless devices get internet connectivity. The only anomaly is the powerbook which I've had to keep wired, as no matter what I do it refuses to work wirelessly. I still have suspicions that the 877W isn't quite right; I'm fairly sure that if I RJ45 the powerline adapter into a different LAN port on it then everything will break. I've just about run out of patience to test this further, and I think I need to go into the 877W's config to match the 877w's lan port's settings. I'm accepting irrational John's answer as he's been enormously helpful, way above the call of duty, and for this line he wrote: Beats the heck out of me. which in the midst of great frustration made me chuckle, and for a sentence in one of his comments to the same answer: If it is specific to the Powerbook I would put that issue aside until after you feel you have the rest of your LAN and the additional WAP all working together correctlyt It was this second sentence that made me put the powerbook aside and concentrate on the other devices that ultimately led me to getting things working.

  Read the article

• What do I need in order to extract and combine text files from multiple ZIP files, via command line?

  - by Iszi

  I've got an interesting scripting challenge in front of me. I'm fairly certain there's a way to do it, but I feel like I'm probably lacking some particular tools and/or functional knowledge. There's some fifty-plus ZIP files that each contain, among other things, text files that need to be merged with one another. The structure is something like this: C:\Reports\FirstJob-1.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\FirstJob-2.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\SecondJob-1.zip |-MyName |-SecondJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt If I had all the Report.txt files in one regular folder, and uniquely named, I could probably just write a FOR statement that targets *.txt and runs something like type filename.txt >> Consolidated.txt on each. However, these all have the same file name and are embedded deep within separate ZIP files. The potentially useful tools I currently have at my disposal are Windows XP Professional SP3, PowerShell, and WinZip. I'd rather not download or install anything else, but I do understand that third-party tools (or additional tools from Microsoft or WinZip) may be necessary. Whatever tools I use should run natively in Windows. I really don't want to have to mess with Cygwin or other emulators on this system. At the very least, I need a tool that will allow me to analyze and manipulate ZIP files from the command line. Also, are there any other particular complications to this that I've not yet thought of?

  Read the article

• Cannot login to Windows7 in normal mode but can in safe mode

  - by Guy

  I have a Windows 7 Ultimate computer (Shuttle) that I built myself and in it I put a Solid State Drive (SSD). It's been working well for a number of months but now when I start it there are problems. I have 2 users setup on the computer and when I try and sign in with either user it claims that the password is incorrect. I could understand the odd typo but I've had my wife try it as well and we've got the passwords correct. On top of that it will remain at the login screen for 1 minute and 20 seconds and then spontaneously reboot without shutting down. So I'm trying to work out if this is a hard disk problem or something else. Any ideas? (I have a nightly backup to a WHS so it will be easy to recover but I don't want to do that unless I have to and don't want to waste time putting in a new HD just to discover it's something else.) More info: If I start in Safe Mode I am able to login with the password and all appears as normal as it can in Safe Mode. However, normal boot continues with same problem.

  Read the article

• Meet our 2009 Oracle Graduates in South Africa

  - by anca.rosu

  Focusing on the broader Oracle community, Oracle South Africa initiated its first skills development programme in May 1988. Since its inception the programme has developed and improved and every year more graduates are taken on board. The Oracle Graduate Programme is made up of specific learning paths designed around customer, partner and Oracle specifications and is structured to meet the urgent skills requirements in the Oracle “economy”. The training programmes have a specific duration and incorporate both theoretical and practical application of Oracle product sets. It is aimed at creating: Meaningful employment for graduates; Learning opportunities for individuals within the organization so that career growth opportunities are exploited to the fullest; Capacity building for small enterprises which is aligned to Oracle’s Enterprise Development Programme Meet our five graduates who joined us in December 2008 and have spent over a year with us! Let’s get their initial feedback on the graduate programme and on their assignment to Jordan. Lector   On the Oracle Graduate Programme: “The Oracle Graduate Programme is an experience of a life time. I would not trade it for anything. It’s challenging and rewarding. I am proud and happy to be in an organization like Oracle” On the assignment in Jordan: "Friendly, welcoming people, world class instructors always willing to go the extra mile. What more can you ask for?"   Lungile On the Oracle Graduate Programme: “I joined Oracle as part of the graduate intake for pre-sales in order to develop my skills and knowledge. Working at Oracle has been an overwhelmingly positive experience as it has encouraged me to progress with my personal development. I am hugely grateful. It has been a great challenge and an awesome opportunity.” On the assignment to Jordan: “Going to Jordan was a great opportunity and the experience of a lifetime. The people were very welcoming and friendly. The culture was totally different from ours - the food, the clothes and the weather. It was an amazingly different experience to work from Sunday to Thursday with Friday and Saturday as the weekend.” Thabo On the Oracle Graduate Programme: “Life is an infinite learning path. I truly value growth. I believe for one to grow, one needs to be challenged to your full potential. The Oracle Graduate Programme offers real growth – and so much more.” On the assignment to Jordan: “I was amazed by the cultural differences. I now understood that to be part of the global community, I must embrace our similarities and understand our differences.”   Albeauty On the Oracle Graduate Programme: “Responsibility, dedication, focus and taking initiative … these are the key points I learned from Oracle. It is such an honour to finally be part of the Oracle family. The graduate programme itself was a great experience as I managed to learn how Oracle operates – it has been the highlight of my year. I believe that my hard work will assist in the growth of the company.” On the Jordan assignment: “A memory worth embracing. Going to Jordan was a great opportunity as I learned a lot with respect to integration between different cultures and getting to adapt to all things different. I, along with almost every other graduate, discovered that Oracle is far more than a database company. Now I know there is far more to the ‘Big Red’ name.” Emmanuel On the Oracle Graduate Programme: “The programme gave me invaluable exposure to the ICT sector and also provided an opportunity to travel, network and exchange ideas with others. The formal training helped me to improve my presentation skills and gave me a better understanding of business etiquette and communication.” On the assignment to Jordan: “It was my first trip abroad. It was a great chance to get to know each other. I had the opportunity to share ideas, share personal stuff as a team. We met experts who gave us superb training in Oracle Technologies. It was great.”   If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com.   Technorati Tags: Oracle community,South Africa,Graduate Programme,Jordan,Technologies

  Read the article

• HTML Redirect issue with Apache2

  - by Vijit Jain

  I am facing an issue with the ProxyPass on my Apache server on Ubuntu. I have configured Apache to deal with Virtual Hosts on my server. There is an application with runs on the server and uses ports 8001 8002. I need to do something like www.example.com/demo/origin to display the contents that I would see when I visit www.example.com:8000. The contents to be displayed are a host of HTML pages. This is the section of the virtual host config that has issues ProxyPass /demo/vader http://www.example.com:8001/ ProxyPassReverse /demo/vader http://www.example:8001/ ProxyPass /demo/skywalker http://www.example.com:8002/ ProxyPassReverse /demo/skywalker http://www.example.com:8002/ Now when I visit example.com/demo/skywalker, I see the first page of port 8002, say the login.html page. The second should have been www.example.com/demo/skywalker/userAction.html, instead the server shows www.example.com:8000/login.html. In the error logs I see something like: [Mon Nov 11 18:01:20 2013] [debug] mod_proxy_http.c(1850): proxy: HTTP: FILE NOT FOUND /htdocs/js/demo.72fbff3c9a97f15a4fff28e19b0de909.min.js I do not have any folder htdocs in the system. This is only an issue while viewing .html pages. Otherwise, no such issue occurs. When I visit localhost:8001 it will show any and all contents without any errors or issues. www.example.com/demo/skywalker displays a separate webpage www.example.com/demo/origin displays a different webpage and www.example.com/demo/vader displays a different webpage. I have also tried to use one more type of combination, <Location /demo/origin/> ProxyPass http://localhost:8000/ ProxyPassReverse http://localhost:8000/ ProxyHTMLURLMap http://localhost:8000/ / </Location> This fails as well. I would greatly appreciate if anyone can help me resolve this issue.

  Read the article

• How to setup equivalent USVIDEO.ORG DNS-Proxy on Linux

  - by Gary

  I have a VPS in the USA running Ubuntu. I want to setup something similar to http://www.usvideo.org Basically, USVIDEO is a DNS service that allows Canadians to access American content like Hulu, Netflix, NBC, and etc (restricted by geographical IP). Here is how I think USVideo does it: Clients (PS3, XBOX, PC) specifies the DNS server(s) as specified on USVIDEO.org's website. If the DNS request is a video/audio site such as Netflix or Pandora, forward the request to a proxy. Otherwise, for all other requests, forward it to a different DNS server. If the specific video/audio URL is requested, return the address of the proxy server, which in turn relays traffic to the destination video/audio domain via the U.S. gateway so that it appears that the access is coming from a U.S. IP address. Once the DNS request has passed the U.S. IP address check, their proxy server steps out of the loop and lets the video streaming site contact you directly to start the video stream. This trick relies on the way that the video streaming sites check the country of your IP address once up front, but don't actually check the country of the destination IP address while the video is streaming. What is elegant about this solution is that a VPN Tunnel is not required to bypass geographical IP checks from certain websites. All that is required on the client side is to specify the DNS server (the VPS). If a certain site is geographically locked, just forward the traffic to a proxy, and that's it. These sites can be specified in the DNS entries, or perhaps in the proxy service to redirect the DNS request to its own proxy. I believe what I need to setup something similar is Squid Proxy, IPTables, and DNS. What I need help is how to exactly approach this? Would Squid Proxy be setup as a transparent proxy?

  Read the article

• Stream video file in debian?

  - by Rob

  I've tried ffserver with ffmpeg, I've tried VLC, and I'm not sure what else to try or what I've done wrong. I've gone through, with VLC +-[ robert@s10 ]--[ ~ ] +[#!]¬ vlc --version VLC media player 2.0.0 Twoflower (revision 2.0.0-0-g421a4fc) VLC version 2.0.0 Twoflower (2.0.0-0-g421a4fc) Compiled by buildd on biber.debian.org (Mar 1 2012 22:21:37) Compiler: gcc version 4.6.2 (Debian 4.6.2-14) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. and tried everything I could in the streaming section, but I can't get the stream to actually work. Looking around, apparently debian strips the encoders from the package? I want to do share some videos I've made with friends on IRC, and it would be easiest if I could just stream it so we can all watch at the same time and critique parts of it in real time. Has anyone done something similar? Linux s10 3.2.0-2-686-pae #1 SMP Tue Mar 20 19:48:26 UTC 2012 i686 GNU/Linux Basic home network, I am behind a NAT (192.168.1.*) and have dynamic DNS set up. That doesn't really matter too much, I can figure that out, but it's not even working locally. I have a file server set up and could just share the files that way, but I'd rather have everyone watching at the same time (or just about). Not worried about installing new packages or building something from source, that's not a big issue, just want to get it working. Big plus if I can do it from command line.

  Read the article

• apache2 defaultsite redirect but not virtual host

  - by MMM

  I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

  Read the article

• Stop Windows Domain Environment Caching Old Passwords?

  - by Daryl Gill

  I have noticed on my domain environment; the old Administrator password (before password expire).. The client machines have cached the old password and have the ability to bypass the new password by entering the old one..? I have noticed on my domain environment; the old Administrator password (before password expire).. The client machines have cached the old password and have the ability to bypass the new password by entering the old one..? Basically; I'm running a UAC enabled domain, which needs the administrator password to continue basic stuff; installations and such. The password for the administrator account has been changed due to expiration of said accounts password. By accident a fellow administrator typed the old password and still bypassed the UAC with what should have been the incorrect password. Is this a bug with the environment? or something that needs to be tweaked in the server sided settings? Is this a bug with the environment? or something that needs to be tweaked in the server sided settings?

  Read the article

• WGet or cURL: Mirror Site from http://site.com And No Internal Access

  - by alharaka

  I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites. UPDATE: I think I figured out the issue. I though the links to the other pages were in the index.html page that downloaded. I was way off. Turns out the footer of the page, which has all the navigation links, is handled by a JavaScript file Include.js, which reads JLSSiteMap.js and some other JS files to do page navigation and the like. As a result, wget does not pick up an other dependencies because a lot of this crap is handled not on web pages. How can I handle such a website? This is one of several problem cases. I assume little can be done if wget cannot parse JavaScript.

  Read the article

• Is On-The-Fly string replacement possible using GreaseMonkey and Firefox

  - by Gary M. Mugford

  I have looked for means to stop Brightcove videos from autostarting in Firefox and have come to the conclusion it isn't possible without external programming via something like Grease Monkey. However, I'm not proficient in javascript let alone GM. So I thought I'd ask here first whether what I want to do is feasible, or whether it's a fool's errand. What I want to accomplish is have a site specific script executed to replace a string value on the run in that site's code. Specifically, what I am looking for is something GM-style that would do this: if site_domain = 'www.SiteWithAutoPlayVideos.com' then replace_all('<param name="autoStart" value="true" />', '<param name="autoStart" value="false" />'); Having looked through Super User for anything GreaseMonkey that might relate, I see notices that the sandbox GM executes scripts in has to remain separate for security reasons. So, I suspect I might be in for disappointment. BUT if it is accomplishable and somebody here can confirm it, then I will do my best to struggle through the learning curve and get this noisome little problem put to rest. Yes, I have tried Flash Block and FlashDisable in order to attack this issue with no avail. Thanks in advance for your time.

  Read the article

• Centralized Windows/Mac Patch Management that is easy to use

  - by BiggsTRC

  I'm looking for advice on what patch management solutions you would recommend based upon your experience. I'm also looking for which ones you would not recommend based upon your experience. We have a mixed network of Windows and Mac clients. Our central servers are all Windows servers, although I have considered putting in a Mac server to better handle our Mac clients. The issue we are facing currently is that we need to maintain the patches on all of our third-party applications. Right now we use WSUS, which handles with patching of Windows and some Microsoft products but that is about it. I need something to cover the other applications, specifically things like Adobe products (Reader, Flash, Dreamweaver, etc.) Our network isn't that big (maybe 200 clients) and I don't have a person to dedicate just to patching and maintaining a patch management solution. Thus very large and complicated solutions like System Center are most likely out. I have recently been looking at Dell's Kace K1000 solution (http://www.kace.com/products/systems-management-appliance/). It seems simple and it provides a lot of tools in one package that I would like/need as well. I like the fact that it is self-contained in an appliance and that it is designed for solutions like mine. However, I'm not sure if this is the best solution. I've also looked some at Shavlik's Netchk solution (http://www.shavlik.com/netchk-protect.aspx) but I don't need an anti-virus product. However, it looks like they might have a very good patch database. My question is this: What are your thoughts on these to products? Are there better products out there? Are there issues that I'm not considering? I want something that is very good at patching a broad range of products, that is simple to use, that takes a minimal amount of management (like WSUS), and that (hopefully) works with Mac and Windows.

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• How do I use a self encrypting drive?

  - by Unique_Key

  I recently purchased a Micron RealSSD c400 self encrypting drive, and I am having a few issues when trying to get it recognized by my laptop (HP Elitebook 8440p running Windows 7 x64; also tried on a custom-built desktop). When I try to initialize the drive from disk management, I get a CRC error; also, when attempting to partition it from Windows setup, the program can't create the partitions. I also tried with UBCD, nothing. I assume this is due to drive security, but I haven't been able to find much information about this online; do I need a management software or something? I'm completely stumped here. EDIT As requested, when I try partitioning the device from Windows setup I get a 0x80300024 error; when I try initializing it from disk management, I get a "Data error (cyclic redundancy check)" message, and the event log shows the following under System: Source: VDS Basic Provider, message: unexpected failure. error code 490@01010004 (2x) Source: Virtual Disk Service, message: VDS fails to write boot code on a disk during clean operation. Error code: 80070001@02070008 (1x) Source: Disk, message: The device \Device\Harddisk2\DR2 has a bad block (2x) The security logs show nothing related. Also, when attempting to configure it from UBCD (utility: HDAT2), I get an error along the lines of "can't edit partition information" or something to that tune.

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >