Search Results

Search found 10844 results on 434 pages for 'device mapper'.

Page 306/434 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Acer Aspire 7750-6801 windows 7 Home Premium x64 not charging properly [closed]

  - by MaurerPower

  I have an Acer Aspire 7750-6801 laptop running Windows 7 Home Premium 64 bit OS. The issue is that it will only charge sometimes when plugged in. I thought it might be a hardware issue, so I tried charging with the laptop off, and it works fine. Also when in Linux, or any other environment other than Windows, it also charges fine. The intermittent charging issue ONLY presents itself when in Windows. I've tried the following: Open Device Manager Under 'Batteries->', I uninstalled 'Microsoft ACPI-Compliant Control Method Battery' Then re-installed using 'Scan for hardware changes' Still no luck. It's quite urgent, any help would be appreciated as I am totally at a loss...

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

• Can one use Airport (Time Capsule) with an external DHCP server?

  - by DNS

  I currently share my DSL connection using a wireless router with DHCP disabled, and dnsmasq running on a Mac Mini serving DHCP & DNS. This setup is important because I have clients doing PXE boot, and I need the control over DHCP that dnsmasq provides. There is also a Time Capsule on the network that's used purely as a backup device; its wireless functions are disabled. The wireless router is starting to get a little flaky, and since it doesn't support 802.11n I'd like to replace it. Rather than buying a new router, I'd like to just use the Time Capsule. But I see no way to disable its DHCP server; when I set the connection type to PPPoE, it insists on serving DHCP. Is there any way to use Airport PPPoE with a DHCP server elsewhere on the network?

  Read the article

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• Small WiFi Network In a Noisy Environment

  - by Sam Skuce

  My company is demoing our network enabled products at big conferences. For this purpose, we would like to be able to set up a small WiFi network in our booth with a range of less than 10 meters. We will only be connecting the device that we are demoing and the iPad or PC running our demo software. I understand that there are conferences that won't allow you to run your own WiFi equipment, but some fairly big ones do (e.g. IMTS, which we were just at). I know that the AP should be encrypted and not broadcast its SSID, but are there additional equipment considerations to deal with the high level of RF noise in such an environment? Is there a particular technology that I should be looking at?

  Read the article

• Writing directory: permission denied even though dir seems to be chmodded correctly

  - by Aron Rotteveel

  I am having some trouble creating files in directory on my Ubuntu machine: I added myself to the www-data group in order for me to easily edit stuff in my /var/www dir on my development machine. stat /var/www shows the following: File: ‘/var/www’ Size: 4096 Blocks: 8 IO Block: 4096 map Device: 808h/2056d Inode: 142853 Links: 3 Access: (0775/drwxrwxr-x) Uid: ( 33/www-data) Gid: ( 33/www-data) Access: 2010-12-30 16:03:18.563998000 +0100 Modify: 2010-12-30 16:02:52.663998000 +0100 Change: 2010-12-30 16:03:13.111998001 +0100 Still, it is impossible for me to create anything below /var/www (the only way for it to work is to chmod it to 777. What am I missing?

  Read the article

• Explain need for Toredo tunnel adapter pseudo interface~simply please [closed]

  - by bill gregmen

  My laptop was stolen by my ex. I need to know how he used my pc to hack all my accounts. I know the tunnel adapter was not used but I blamed him for using it. I need to explain in court exactly what the device is and what it does. Also haven't figured out how he accessed my computer. I disabled the router recently. Can an external modem be hacked? I was told by my server that the modem I.P. address changes randomly every 4 days. Thank you

  Read the article

• My stereo headphones cable is broken, what can I do?

  - by ucas

  I have a pair of stereo headphones, I got them on Amazon. Now, the right headphone stops producing sound. To fix that I need to move/shake the tip of the cable (the one before that part of tip which goes inside the headphone jack on the laptop). But as time goes, this sort of fix helps less and less. It looks that the cable is a bit broken at the place where I shake/move cable. Is that the end of use of my headphones? Is that a reject of the device? Is there a way to fix it, for example, changing the very tip of the cable at the very end of it. Any advice on buying headphones?

  Read the article

• RAID strategy - 8 1TB drives

  - by alex

  I'm setting up a backup storage device- This machine has Windows Server 2008, on a separate boot drive. It has 8x 1TB drives, and uses a hardware RAID card. My question is, which RAID configuration should I go for? Initially, I was going to go with RAID 5 across all 8 drives, however members on serverFault have advised against it. I was just wondering why? Some people have suggested 2 lots of RAID 5 configuration on 4 of the drives, then striping them... I want to maximise the storage space, as this is a backup unit - will store SQL backups, Acronis Images, files, etc... It won't be for public access, so the I/O won't be that high I wouldn't think.

  Read the article

• How to set up server to be accessed from mobile devices [closed]

  - by Kgrover

  I need to set up a server that will eventually be accessed from an Android application. I don't have experience with how to go about this, but I've seen MySQL servers (Amazon EC2). I would need to store data on the server remotely (again, from a mobile device) and fetch it to display. What would be the best kind of server to use? I'm guessing I would only need around 50 GB of space. Is it possible to use a network drive and set that up as a remote server with an IP address? I would need to upload and extract data through java on Android. This is my first question on ServerFault, and I'm not sure if it's the appropriate forum. If not, please redirect me.

  Read the article

• Boot custom linux up by pressing Lenovo OKR button?

  - by Semmu

  I have a Lenovo Y510p laptop and I'm a Linux user, use Windows only for gaming. The device had no OS when I bought it and I also installed an SSD besides the 1TB hard drive. I would like to "hack" the One-Key-Recovery button, because I have no interest in its default behaviour (I don't need Windows recovery), but if I could boot up a hidden, fail-safe Linux with it, that would be great. How could I achieve it? I tried to search what the button does, but I only found some installers for Windows that could magically create a partition for the recovery. I would like to override this behaviour completely to boot up something else.

  Read the article

• Access to certain files but not others

  - by ADW

  Hoping someone can help me as I have, thus far, been unable to solve the issue. I am running a media center utilizing Ubuntu 12.04. I was initially successful accessing media files from the desktop running Ubuntu via my Windows 7 laptop and Roku device. I started backing up a new batch of DVD's I had (into MKV files, like everything else in my media folders) and noticed I cannot access the new files from either the Roku or the laptop. I have not changed any settings in the media folder and verified the shared permissions. The parent folder (Media) is shared (with permission flow-down) while the subfolders (Movies, TV Shows, Music) are not. I have changed the permissions on this to include shared when the access problem arose but with no success. I can only access the original files uploaded an not new files added. Any suggestions??? Thanks in advance for any and all help.

  Read the article

• Ubuntu USB flash boot drive gets spontaneous "Unhandled sense code" error and causes drive to switch to Write protected

  - by Steve

  What happens is that the system runs fine for several days or even a week and then suddenly the root file-system / goes read-only. Looking at the syslog it shows that there was an 'Unhandled sense code'. This is under Ubuntu 10.04 but I saw the same thing with Ubuntu 9 with different flash media. /dev/sdg1 on / type ext4 (rw,errors=remount-ro) Jun 26 08:50:04 host1 kernel: [926247.565090] sd 5:0:0:0: [sda] Unhandled sense code Jun 26 08:50:04 host1 kernel: [926247.565094] sd 5:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 26 08:50:04 host1 kernel: [926247.565098] sd 5:0:0:0: [sda] Sense Key : Data Protect [current] Jun 26 08:50:04 host1 kernel: [926247.565103] sd 5:0:0:0: [sda] Add. Sense: Write protected Jun 26 08:50:04 host1 kernel: [926247.565108] sd 5:0:0:0: [sda] CDB: Write(10): 2a 00 00 46 29 18 00 00 08 00 Jun 26 08:50:04 host1 kernel: [926247.565117] end_request: I/O error, dev sda, sector 4598040 Jun 26 08:50:04 host1 kernel: [926247.569788] Buffer I/O error on device sda1, logical block 574499 Jun 26 08:50:04 host1 kernel: [926247.574677] lost page write due to I/O error on sda1

  Read the article

• Harddrive speed drops a lot!

  - by AZ

  The hard drive is used to do BT with uTorrent. Recently uTorrent began to report there is a "I/O Device error", then I use HD Tune to test it, it turns out the transfer rate is only 16 MB/sec. At the same time, I have a similar hard drive tested, it rates as 120 MB/sec. They are both 7200rpm desktop hard drives. I used chkdsk to fix it but the rate didn't change. Is this a symptom of hard drive failure? Should I backup the content on the disk ASAP or is there any other tool can fix it or diagnosis it?`

  Read the article

• Windows boot manager and two hard disks

  - by Pincopallino

  here's my situation: I had an HDD with Windows 8 installed (UEFI mode). I bought a SSD and wanted to do a clean install of Windows, so I thought that disabling the HDD and leaving the SSD as the only drive when installing was the right procedure to install the boot manager on the SSD. Unfortunately, after I plugged the HDD back in, the computer won't boot unless I select from the BIOS directly the SSD as the boot device. I guess the problem is that I have two Windows Boot Managers on two separate drives and they conflict. How would I solve this problem (excluding a format of the HDD, because I need to access data on the old Windows partition and, ideally, I would like to be able to boot that partition)?

  Read the article

• Windows 7 boot error 0xc0000225 after falling down

  - by Hulehule20

  My Toshiba netbook fell down and hasn't booted again. When I start Windows 7 it immediately says: Windows failed to start... Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. After that, there are a few things to consider: There's a Linux distro Linkat which is also installed in the computer. It starts normally without any problem and it doesn't seem to display any errors when it boots. I restored all computer OSs with clonezilla and some images provided by the manufacturer, and it's done nothing. I have already checked the basic components of the PC (RAM, Hard Disk, WLAN Card) are pluged in and working. My impression is that's all about some broken part inside, though the Linux OS starts normally. Does anyone know a way I can fix this or at least any software for identifying the problem at all?

  Read the article

• Does programmable hardware exist to allow hardware to be programmed by computers?

  - by agentbanks217

  I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build an automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)?

  Read the article

• Asus Eee-PC 1015PEM

  - by Bianka

  My Asus worked perfectly until yesterday. I assume that the battery drained and AC was not plugged. I turned it on and doesn't chargeat all. It seems that something wrong with my battery. It works from AC but when it is plugged it shows only 4% available charging. When I unplug AC it shuts down right away. I already tried the 45 seconds holding power button method, and I uninstalled in device manager Microsoft ACPI-compliant Method Battery. Nothing helped. Does anybody has any idea?

  Read the article

• Ping or accessing WAN IP from LAN results in failure on only one box

  - by ComputerUserGuy

  Morning/evening gents. I purchased a radical domain name today to set up a name for my services and to set up SSL. I configured the SSL fine and all but when I went to my website I couldn't connect. I can connect to the site with any other device in my house and my friend can connect to it as well from outside of the LAN. I am hosting the services with my computer and I can't access the service. Whenever I ping it using the command prompt I get a result of "General Failure.". It saddens me that they couldn't make a better message as it kind of brings me down. I'm not sure what's the deal here as I have all of my firewalls down and my ports are forwarded. Running Windows 7. Thanks for the assistance chaps.

  Read the article

• No SATA drives after PSU Upgrade

  - by hauptbenutzer

  I know this sounds a lot like this but I just confirmed that my MBR is fine as well as the SSD drive in question. What happened: I upgraded my be-quiet 700w PSU to the 1000w dark power pro. When I tried booting the system and none of the drives (all SATA) were detected, resulting in the "Boot device failure" error. After that I unplugged all but the boot drive, triple checked that all cables were in fact nice and tight inside their sockets, replaced both e-SATA and power cables ; still with the same outcome. Finally I reconnected my old PSU and sure enough the PC booted without any hassle (except of course for the direful construction that is currently occupying my desk). Does anybody have any advice on how to proceed? Surely, it is possible the PSU is faulty but are there other explanations? Thanks in advance PS. if of any help: Motherboard is GIGABYTE GA-PH67A-UD3-B3 H67 LGA 1155

  Read the article

• Control Windows 8 with a tablet

  - by Frantumn

  It seems much of Windows 8 is based on the idea that it will be running on tablets, and touch screen PCs. I like this, but I don't have a W89 tablet, or a touch PC yet. I'm running W8 on a laptop, and am wondering if there's any way of using my iPad2 as a touch interface with metro? Or another options that'd be nice is if there's a input device similar to Apple's "Magic Trackpad" that would allow me to use hand gestures instead of a mouse cursor when in metro apps. I've seen some cool videos of MS Smart Glass and it would seem that the capabilities are there. But it may just be too early on to do this? I'm not sure.

  Read the article

• Why does my Windows computer immediately turn back on after sleep/hibernate?

  - by nbolton

  After clicking sleep or hibernate in Windows 7, my computer loads for a while and then goes into sleep mode, but not 1 second later it powers back up. The event log has no errors and no warnings appear when it comes back out of sleep/hibernation. Here's my system specifications: Asus P5KPL-VM Windows 7 I believe this is all that's relevant. I've installed the latest chipset drivers, but I'm unable to update my BIOS (but this is another matter; maybe because the motherboard in the V3-P5G31 bundle is different). I've also tried turning off the "Allow this device to wake up my computer" for the network card, keyboard, and mouse -- but this makes no difference. If flashing the BIOS is the only thing that will fix this, then I will create a new question to this effect. Maybe I should change the suspend mode from S3 to S1?

  Read the article

• Ubuntu upstart hangs on interactive start & stop

  - by danorton

  How do I get Ubuntu upstart to not hang on interactive start & stop? I have created many upstart scripts that work fine during init, but often hang when I enter them at the console. If I CTRL+C out, all that happens is that the job changes state. The script is never run. I’m running Ubuntu Lucid on a Xen virtual server with a Linux 2.6.39 kernel. Below is merely a representative example of many scripts that behave this way: description "apache2" start on local-filesystems \ and (net-device-up IFACE=lo) \ and (runlevel [2345]) stop on runlevel [016] respawn respawn limit 10 5 expect daemon script . /etc/apache2/envvars /usr/sbin/apache2ctl start end script

  Read the article

• Is there a way to send personal documents on Kindle for Mac app?

  - by Sid

  I have the Kindle App on my Mac, and an android phone. When I email documents to my [email protected] id, I am able to see it in my library, and subsequently send it to my Android device. However, I'm not able to send it to the Kindle App for my Mac. The Kindle for Mac FAQs clearly state that Magazines, personal documents, etc. are not supported. However, I came across here that there is a workaround to this, although I've not been able to figure out what it is.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >