Search Results

Search found 11100 results on 444 pages for 'xt 20'.

Page 306/444 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• Nginx + php-fpm - recv() error

  - by Ilya Biryukov

  I get the follow error in the nginx log [error] 17734#0: *6643 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: [cut], server: [cut], request: "GET /venues HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "[cut]" I have a dedicated box with 8 gb ram, quad core chip. Good server. Nginx, php-fpm & mysql all latest versions running under ubuntu 10.04 I only get this when I stress test the server with siege. If I increase the number of concurrent connections to 100, I can get up to 20% of all requests to fail. Furthermore, I don't get this on pages that have no mysql queries. And only a few failures on pages with moderate number of queries. Bit, I'm not sure if that's got to do anything with it. I have a feeling this is something to do with php. But I can't figure it out. Any suggestions of where to even start looking? Update: and the php error log is silent. No record of anything going wrong

  Read the article

• How is it possible that I can do a host lookup but not a curl?

  - by Daniel Quinn

  Has anyone ever seen this before? Note that this happens not only with google.com, but with every domain I try. It's a wireless connection (WEP), but I'm not sure how that would be relevant: $ curl -v google.com # This takes about 60s to return * getaddrinfo(3) failed for google.com:80 * Couldn't resolve host 'google.com' * Closing connection #0 curl: (6) Couldn't resolve host 'google.com' $ host google.com google.com has address 209.85.148.106 google.com has address 209.85.148.147 google.com has address 209.85.148.99 google.com has address 209.85.148.103 google.com has address 209.85.148.104 google.com has address 209.85.148.105 google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. $ cat /etc/resolv.conf # Generated by NetworkManager nameserver 192.168.1.201 $ cat /etc/hosts 127.0.0.1 localhost ::1 localhost $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 wlan0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• How does VirtualBox's memory usage work?

  - by DrFredEdison

  I've been running several VM's with VirtualBox, and the memory usage reported from various perspectives, and I'm having trouble figuring how much memory my VMs actually use. Here is an example: I have a VM running Windows 7 (as the Guest OS) on my windows XP Host machine. The Host Machine Has 3 GB of RAM The Guest VM is setup to have a base memory of 1 GB If I run Task Manger on the Guest OS, I see memory usage of 430 MB If I run Task Manger on the host OS, I see 3 processes that seem to belong to VirtualBox: VirtualBox.exe (1), using 60 MB of memory (This one seems to have the most CPU usage) VirtualBox.exe (2), using 20 MB of memory VBoxSvc.exe, using 11.5 MB of memory While running the VM, the Host OS's memory usage is about 2 GB When I shut down the VM, the Host OS's it goes back to memory usage goes down to about 900 MB So clearly, there are some huge differences here. I really don't understand how the GuestOS can use 400+ MB, while the Host OS only shows about 75 MB allocated to the VM. Are there other processes used by VirtualBox that aren't as obviously named? Also, I'd like to know if I run a machine with 1 GB, is that going to take 1 GB away from my host OS, or only the amount of memory the Guest machine is currently using? update Somene expressed distrust over my memory usage numbers, and I'm not sure if that distrust was directed at me, or my Host OS's Task Manager's reporting (which is perhaps the culprit), but for any skeptics, here is a screenshot of those processes on the host machine:

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• This .mpg video clip doesn't play well

  - by Roey

  I've installed K-lite mega codec pack v6.9.0 with playback essentials without player. My default and only media player is windows media player. here are the clip's media info: General Complete name : D:\Users\Roey\Downloads\B384MV.mpg Format : MPEG-PS File size : 273 MiB Duration : 4mn 59s Overall bit rate : 7 643 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, BVOP : No Format settings, Matrix : Default Format settings, GOP : M=1, N=15 Duration : 4mn 57s Bit rate mode : Variable Bit rate : 7 363 Kbps Nominal bit rate : 9 000 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Compression mode : Lossy Bits/(Pixel*Frame) : 0.142 Stream size : 261 MiB (96%) Audio ID : 192 (0xC0) Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Duration : 4mn 59s Bit rate mode : Constant Bit rate : 128 Kbps Channel(s) : 2 channels Sampling rate : 44.1 KHz Compression mode : Lossy Stream size : 4.56 MiB (2%) Menu When I play it there is no sound (just a little "kahhhh" noise every 10-20 seconds) and the frames are moving very slow - it "jumps" frames. A blue tray icon [FFa] "ffdshow audio decoder" pops with the following details: Input:MP3, stereo, 44100 Hz (libavocodec) Output:PCM, stereo, 44100 Hz, 16-bit integer Any help will be much appreciated. Thanks

  Read the article

• IPtables - Accept Arbitrary Packets

  - by Asad Moeen

  I've achieved a lot on blocking attacks on GameServers but I'm stuck on something. I've blocked major requests of game-server which it aceepts in the form "\xff\xff\xff\xff" which can be followed by the actual queries like get status or get info to make something like "\xff\xff\xff\xff getstatus " but I see other queries if sent to the game-server will cause it to reply with a "disconnect" packet with the same rate as input so if the input rate is high then the high output of "disconnect" might give lag to the server. Hence I want to block all queries except the ones actual clients use which I suppose are in the form "\xff\xff\xff\xff" or .... so, I tried using this rule : -A INPUT -p udp -m udp -m u32 ! --u32 0x1c=0xffffffff -j ACCEPT -A INPUT -p udp -m udp -m recent --set --name Total --rsource -A INPUT -p udp -m udp -m recent --update --seconds 1 --hitcount 20 --name Total --rsource -j DROP Now where the rule does accept the clients but it only blocks requests in the form "\xff\xff\xff\xff getstatus " ( by which GameServer replies with status ) and not just "getstatus " ( by which GameServer replies with disconnect packet ). So I suppose the accept rule is accepting the simple "string" as well. I actually want it to also block the non-(\xff) queries. So how do I modify the rule?

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• VMware ESXi 4.1 snapshot of server 2008R2 machine generates 2 indentical snapshots

  - by Peter

  I have 2 VMs that are failing to get veeam backups, and it appears that the culprit is vmware snapshots. We are running Vsphere ESXi 4.1 build 320092, we have multiple server 2008R2 machines that take snapshots fine, but when with these two VMs when I take a snapshot I get 2 identical snapshots a few seconds apart. The snapshot manager only shows 1 snapshot, but there are 2 files 1 number off, that are identical sizes. There is only one disk on each VM, so that isn't the problem. Has anyone seen this behavior before and know how to fix it? Here are the files after a bad snapshot VM-XXX-000001-ctk.vmdk VM-XXX-000001-delta.vmdk VM-XXX-000001.vmdk VM-XXX-000002-ctk.vmdk VM-XXX-000002-delta.vmdk VM-XXX-000002.vmdk VM-XXX-2a659dbf.hlog VM-XXX-2a659dbf.vswp VM-XXX-Snapshot286.vmsn VM-XXX-aux.xml VM-XXX-ctk.vmdk VM-XXX-flat.vmdk VM-XXX-vss_manifests286.zip VM-XXX.nvram VM-XXX.vmdk VM-XXX.vmsd VM-XXX.vmx VM-XXX.vmxf vmware-20.log vmware-21.log vmware-22.log vmware-23.log vmware-24.log vmware-25.log vmware.log VM-XXX-000001.vmdk and VM-XXX-000002.vmdk are the exact same size.

  Read the article

• checksecurity / setuid changes, is this a bug or did somebody break in?

  - by Fabian Zeindl

  I received a mail by checksecurity from my ubuntu 12.04 server with the following content: --- setuid.today 2012-06-03 06:48:09.892436281 +0200 +++ /var/log/setuid/setuid.new.tmp 2012-06-17 06:47:51.376597730 +0200 @@ -30,2 +30,2 @@ - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudo - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudoedit + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudo + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudoedit @@ -42 +42 @@ - 130507 666 1 root root 0 Sat Jun 2 18:04:57.0752979385 2012 ./var/spool/postfix/dev/urandom + 130507 666 1 root root 0 Mon Jun 11 08:47:16.0919802556 2012 ./var/spool/postfix/dev/urandom First i was worried, then i realized that the change was actually 2 weeks ago, i think there was a sudo-update back then. Since checksecurity runs in /etc/cron.daily i wondered why i only get that email now. I looked into /var/log/setuid/ and found the following files: total 32 -rw-r----- 1 root adm 816 Jun 17 06:47 setuid.changes -rw-r----- 1 root adm 228 Jun 3 06:48 setuid.changes.1.gz -rw-r----- 1 root adm 328 May 27 06:47 setuid.changes.2.gz -rw-r----- 1 root root 1248 May 20 06:47 setuid.changes.3.gz -rw-r----- 1 root adm 4473 Jun 17 06:47 setuid.today -rw-r----- 1 root adm 4473 Jun 3 06:48 setuid.yesterday The obvious thing that confuses me is that the file setuid.yesterday is not from yesterday = Jun/16. Is this a bug?

  Read the article

• ntpdate cannot receive data

  - by Hengjie

  I have a problem where running ntpdate on my server doesn't return any data therefore I get the following error: [root@server etc]# ntpdate -d -u -v time.nist.gov 12 Apr 01:10:09 ntpdate[32072]: ntpdate [email protected] Fri Nov 18 13:21:21 UTC 2011 (1) Looking for host time.nist.gov and service ntp host found : 24-56-178-141.co.warpdriveonline.com transmit(24.56.178.141) transmit(24.56.178.141) transmit(24.56.178.141) transmit(24.56.178.141) transmit(24.56.178.141) 24.56.178.141: Server dropped: no data server 24.56.178.141, port 123 stratum 0, precision 0, leap 00, trust 000 refid [24.56.178.141], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 14:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 14:28:16.000 transmit timestamp: d3303975.1311947c Thu, Apr 12 2012 1:10:13.074 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 12 Apr 01:10:14 ntpdate[32072]: no server suitable for synchronization found I have tried Googling the 'no server suitable for synchronization found' error online and I have tried disabling my firewall (running iptables -L returns no rules). I have also confirmed with my DC that there are no rules that are blocking ntp (port 123). Does anyone have any ideas on how I may fix this? Btw, this is what the output should look like on a working server in another DC: 11 Apr 19:01:24 ntpdate[725]: ntpdate [email protected] Fri Nov 18 13:21:17 UTC 2011 (1) Looking for host 184.105.192.247 and service ntp host found : 247.conarusp.net transmit(184.105.192.247) receive(184.105.192.247) transmit(184.105.192.247) receive(184.105.192.247) transmit(184.105.192.247) receive(184.105.192.247) transmit(184.105.192.247) receive(184.105.192.247) transmit(184.105.192.247) receive(184.105.192.247) transmit(184.105.192.247) server 184.105.192.247, port 123 stratum 2, precision -20, leap 00, trust 000 refid [184.105.192.247], delay 0.18044, dispersion 0.00006 transmitted 4, in filter 5 reference time: d330364e.e956694f Wed, Apr 11 2012 18:56:46.911 originate timestamp: d3303765.8702d025 Wed, Apr 11 2012 19:01:25.527 transmit timestamp: d3303765.73b213e3 Wed, Apr 11 2012 19:01:25.451 filter delay: 0.18069 0.18044 0.18045 0.18048 0.18048 0.00000 0.00000 0.00000 filter offset: -0.00195 -0.00197 -0.00211 -0.00202 -0.00202 0.000000 0.000000 0.000000 delay 0.18044, dispersion 0.00006 offset -0.001970

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

• UPS power requirements for server

  - by captainentropy

  Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

  Read the article

• Nagios check_host_alive and check_ping not showing host as down

  - by Kyle

  I am using the check_host_alive command to send 5 packets every minute to all my routers at remote locations. I noticed today I received a notification from The AT&T Global Client Support Center that a router was down (which can take 5-30 minutes to send these notices out) and never received a notice from Nagios. I went onto Nagios and it is was showing the host as alive with a latency of 0ms. This tells me it is seeing the automated response from my router in the data center that, "TTL expired in transit" as a reply from the remote router. Is there anyway for me to tell nagios to check where the reply is comming from? I feel like other people have to of had this issue... I tested it with the check_ping command and it produced the same results. I have the command defined has %hostname% and the proper IP in the host definition, and it works fine for telling me the latency is high. Any ideas are welcome, I have already exercised my Google skills with no results. EDIT: root@IM-UBTU:/# /usr/local/nagios/libexec/check_ping -H 192.168.250.1 -w 100.0,10% -c 200.0,20% -vvv CMD: /bin/ping -n -U -w 10 -c 5 192.168.250.1 Output: PING 192.168.250.1 (192.168.250.1) 56(84) bytes of data. Output: From 10.69.10.2 icmp_seq=1 Time to live exceeded It knows something is wrong why doesn't it give me a warning?

  Read the article

• Applications randomly alt-tab? (especially full screen games)

  - by Henry Scotts

  I'm not sure when this began, how it happens, or why it happens, but it is quite bothersome and apparently random. Just randomly throughout the day my computer will just go to the desktop. I could be in a full screen game and it will just immediately alt tab and present the desktop. Or I could be watching a movie and this happens. Sometimes it happens once every three hours and other times (just today actually) it did it twice in the span of 30 seconds. I am positive I am not pressing a hotkey because I launched a game, sat idle, and noticed it alt tab while cleaning up around my room after about 20 minutes. Sometimes it goes days without this happening. Specs: Windows 7 Ultimate 64 Bit, 10 gigs of RAM, GeForce GTX 260, Intel Xeon CPU. I also have basically nothing running when it happens other than the game and FireFox. My FireFox add-ons: Adblock Plus, Download Statusbar, Firebug, FirePHP, lazarus form recovery, tree-style-tabs, yslow. I doubt FireFox is causing the issue but I figured I'd include it anyway because it is the only application I have running when it happens. As for user processes I have running: VCDDaemon (context menu for virtual clone drive), razerhid (mouse), OSD, taskhost, dmw (desktop window manager), anyfullscreengame, audiorepeater, netsession_win, explorer, razerofa, tsvncache, firefox, plugin-container, and EKIJ5000MUI (printer). Whew. Okay. That was a lot of information. If someone could diagnose this I would be most grateful for this has been around with me for years.. Thanks for reading! PS: I doubt it's a virus because I never download illegal software and pretty much only browse Reddit and Stackexchange and play games. If it was a virus it would be a pretty lame one.. Hah..

  Read the article

• Best practices for thin-provisioning Linux servers (on VMware)

  - by nbr

  I have a setup of about 20 Linux machines, each with about 30-150 gigabytes of customer data. Probably the size of data will grow significantly faster on some machines than others. These are virtual machines on a VMware vSphere cluster. The disk images are stored on a SAN system. I'm trying to find a solution that would use disk space sparingly, while still allowing for easy growing of individual machines. In theory, I would just create big disks for each machine and use thin provisioning. Each disk would grow as needed. However, it seems that a 500 GB ext3 filesystem with only 50 GB of data and quite a low number of writes still easily grows the disk image to eg. 250 GB over time. Or maybe I'm doing something wrong here? (I was surprised how little I found on the subject with Google. BTW, there's even no thin-provisioning tag on serverfault.com.) Currently I'm planning to create big, thin-provisioned disks - but with a small LVM volume on them. For example: a 100 GB volume on a 500 GB disk. That way I could more easily grow the LVM volume and the filesystem size as needed, even online. Now for the actual question: Are there better ways to do this? (that is, to grow data size as needed without downtime.) Possible solutions include: Using a thin-provisioning friendly filesystem that tries to occupy the same spots over and over again, thus not growing the image size. Finding an easy method of reclaiming free space on the partition (re-thinning?) Something else? A bonus question: If I go with my current plan, would you recommend creating partitions on the disks (pvcreate /dev/sdX1 vs pvcreate /dev/sdX)? I think it's against conventions to use raw disks without partitions, but it would make it a bit easier to grow the disks, if that is ever needed. This is all just a matter of taste, right?

  Read the article

• OpenSWAN KLIPS not working

  - by bonzi

  I am trying to setup IPSec between 2 VM launched by OpenNebula. I'm using OpenSWAN for that. This is the ipsec.conf file config setup oe=off interfaces=%defaultroute protostack=klips conn host-to-host left=10.141.0.135 # Local IP address connaddrfamily=ipv4 leftrsasigkey=key right=10.141.0.132 # Remote IP address rightrsasigkey=key ike=aes128 # IKE algorithms (AES cipher) esp=aes128 # ESP algorithns (AES cipher) auto=add pfs=yes forceencaps=yes type=tunnel I'm able to establish the connection with netkey but klips doesnt work. ipsec barf shows #71: ERROR: asynchronous network error report on eth0 (sport=500) for message to 10.141.0.132 port 500, complainant 10.141.0.135: No route to host [errno 113, origin ICMP type 3 code 1 (not authenticated)] Tcpdump shows 22:50:20.592685 IP 10.141.0.132.isakmp > 10.141.0.135.isakmp: isakmp: phase 1 I ident 22:50:25.602182 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:26.602082 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:27.601985 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 ipsec eroute shows 0 10.141.0.135/32 -> 10.141.0.132/32 => %trap What could be the problem?

  Read the article

• Tools to manage sql 2008 database mirroring?

  - by lemkepf

  We are going to be moving about 20 databases that live on a single instance of sql 2000 to a sql 2008 r2 environment with database mirroring. What I'm looking for is a tool or scripts that will help me manage the conversion and management of those 20db's onto this new mirrored environment easily. There are many steps in setting each DB up and I want to automate as much as possible. Edit: Here are the steps I've been doing manually: Create the same username/passwords from the old sql 2000 server onto new sql 2008 server. Then sync those users/passwords onto the other sql 2008 server with the same SSID's so when we do the db backup and restore they match up. Take a backup of each sql 2000 db's. Copy them to server A. Restore the backup to server A. Backup from server a, copy to server b, restore there. Run the mirror "configure security" wizard. Start mirroring. I've love to be able to script this out or have a tool that does it for me. Thanks! Paul

  Read the article

• Connect to WEP Wireless Network by command line on Ubuntu

  - by Tim

  Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

  Read the article

• Apache going straight to 100% mem usage on localhost

  - by Dennis Pedrie

  Hi, I'm running XAMPP on a OS X testing server... I'm the only person sending requests to the server. I've never messed with Apache config before, so I'm kinda without a paddle here. When I start Apache, I get ~10 httpd processes started, and 95% idle CPU. When I request a WordPress page, the CPU usage goes to 50%, and the page loads in about five seconds. It seems like once the page has finished loading, the CPU usage jumps to 100%, almost all of that httpd. A ton of processes get started, and they don't go away, and their CPU usage stays the same. I've changed the MaxRequestPerChild setting and so forth, but nothing seems to solve the problem. Even now, having not send any requests for about 15 minutes, the CPU usage is at 100%. Here's the applicable settings: Timeout 10 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 0 MaxSpareServers 2 MaxClients 20 MaxRequestsPerChild 50 </IfModule> I had always thought that once the request was made, Apache killed the process. Is there anything I can do to bring down the CPU usage, or is this just something I'll have to deal with? Thanks for helping out an Apache idiot.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >