Search Results

Search found 8094 results on 324 pages for 'campus solutions'.

Page 308/324 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• SQL Server Master class winner

  - by Testas

   The winner of the SQL Server MasterClass competition courtesy of the UK SQL Server User Group and SQL Server Magazine!    Steve Hindmarsh     There is still time to register for the seminar yourself at:  www.regonline.co.uk/kimtrippsql     More information about the seminar     Where: Radisson Edwardian Heathrow Hotel, London  When: Thursday 17th June 2010  This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will: Debunk many of the ingrained misconceptions around SQL Server's behaviour    Show you disaster recovery techniques critical to preserving your company's life-blood - the data    Explain how a common application design pattern can wreak havoc in the database Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to change  Sessions Abstracts  KEYNOTE: Bridging the Gap Between Development and Production    Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.   SESSION ONE: SQL Server Mythbusters  It's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained.   SESSION TWO: Database Recovery Techniques Demo-Fest  Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted!   SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward   Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys!   SESSION 4: Essential Database Maintenance  In this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well. Speaker Biographies     Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.   Speaker Testimonials  "To call them good trainers is an epic understatement. They know how to deliver technical material in ways that illustrate it well. I had to stop Paul at one point and ask him how long it took to build a particular slide because the animations were so good at conveying a hard-to-describe process." "These are not beginner presenters, and they put an extreme amount of preparation and attention to detail into everything that they do. Completely, utterly professional." "When it comes to the instructors themselves, Kimberly and Paul simply have no equal. Not only are they both ultimate authorities, but they have endless enthusiasm about the material, and spot on delivery. If either ever got tired they never showed it, even after going all day and all week. We witnessed countless demos over the course of the week, some extremely involved, multi-step processes, and I can’t recall one that didn’t go the way it was supposed to." "You might think that with this extreme level of skill comes extreme levels of egotism and lack of patience. Nothing could be further from the truth. ... They simply know how to teach, and are approachable, humble, and patient." "The experience Paul and Kimberly have had with real live customers yields a lot more information and things to watch out for than you'd ever get from documentation alone." “Kimberly, I just wanted to send you an email to let you know how awesome you are! I have applied some of your indexing strategies to our website’s homegrown CMS and we are experiencing a significant performance increase. WOW....amazing tips delivered in an exciting way!  Thanks again” 

  Read the article

• When OneTug Just Isn&rsquo;t Enough&hellip;

  - by onefloridacoder

  I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

  Read the article

• Visiting the Emtel Data Centre

  Back in February at the first event of the Emtel Knowledge Series (EKS) I spoke to various people at Emtel about their data centre here on the island. I was trying to see whether it would be possible to arrange a meeting over there for a selected group of our community members. Well, let's say it like this... My first approach wasn't that promising and far from successful but during the following months there were more and more occasions to get in touch with the "right" contact persons at Emtel to make it happen... Setting up an appointment and pre-requisites The major improvement came during a Boot Camp for Windows Phone 8.1 App development organised by Microsoft Indian Ocean Islands in cooperation with Emtel at the Emtel World, Ebene. Apart from learning bits and pieces regarding Universal Apps I took the opportunity to get in touch with Arvin Lockee, Sales Executive - Data, during our lunch break. And this really kicked off the whole procedure. Prior to get access to the Emtel data centre it is requested that you provide full name and National ID of anyone going to visit. Also, it should be noted that there was only a limited amount of seats available. Anyways, packed with this information I posted through the usual social media channels. Responses came in very quickly and based on First-come, first-serve (FCFS) principle I noted down the details and forwarded them to Emtel in order to fix a date and time for the visit. In preparation on our side, all attendees exchanged contact details and we organised transport options to go to the data centre in Arsenal. The day before and on the day of our meeting, Arvin send me a reminder to check whether everything is still confirmed and ready to go... Of course, it was! Arriving at the Emtel Data Centre As I'm coming from Flic En Flac towards the North, we agreed that I'm going to pick up a couple of young fellows near the old post office in Port Louis. All went well, except that Sean eventually might be living in another time zone compared to the rest of us. Anyway, after some extended stop we were complete and arrived just in time in Arsenal to meet and greet with Ish and Veer. Again, Emtel is taking access procedures to their data centre very serious and the gate stayed close until all our IDs had been noted and compared to the list of registered attendees. Despite having a good laugh at the mixture of old and new ID cards it was a straight-forward processing. The ward was very helpful and guided us to the waiting area at the entrance section of the building. Shortly after we were welcomed by Kamlesh Bokhoree, the Data Centre Officer. He gave us brief introduction into the rules and regulations during our visit, like no photography allowed, not touching the buttons, and following his instructions through the whole visit. Of course! Inside the data centre Next, he explained us the multi-factor authentication system using a combination of bio-metric data, like finger print reader, and "classic" pin panel. The Emtel data centre provides multiple services and next to co-location for your own hardware they also offer storage options for your backup and archive data in their massive, fire-resistant vault. Very impressive to get to know about the considerations that have been done in choosing the right location and how to set up the whole premises. It should also be noted that there is 24/7 CCTV surveillance inside and outside the buildings. Strengths of the Emtel TIER 3 Data Centre, Mauritius Finally, we were guided into the first server room. And wow, the whole setup is cleverly planned and outlined in the architecture. From the false floor and ceilings in order to provide optimum air flow, over to the separation of cold and hot aisles between the full-size server racks, and of course the monitored air conditions in order to analyse and watch changes in temperature, smoke detection and other parameters. And not surprisingly everything has been implemented in two independent circuits. There is a standardised classification for the construction and operation of data centres world-wide, and the Emtel's one has been designed to be a TIER 4 building but due to the lack of an alternative power supplier on the island it is officially registered as a TIER 3 compliant data centre. Maybe in the long run there might be a second supplier of energy next to CEB... time will tell. Luckily, the data centre is integrated into the National Fibre Optic Gigabit Ring and Emtel already connects internationally through diverse undersea cable routes like SAFE & LION/LION2 out of Mauritius and through several other providers for onwards connectivity. The data centre is part of the National Fibre Optic Gigabit Ring and has redundant internet connectivity onwards. Meanwhile, Arvin managed to join our little group of geeks and he supported Kamlesh in answering our technical questions regarding the capacities and general operation of the data centre. Visiting the NOC and its dedicated team of IT professionals was surely one of the visual highlights. Seeing their wall of screens to monitor any kind of activities on the data lines, the managed servers and the activity in and around the building was great. Even though I'm using a multi-head setup since years I cannot keep it up with that setup... ;-) But I got a couple of ideas on how to improve my work spaces here at the office. Clear advantages of hosting your e-commerce and mobile backends locally After the completely isolated NOC area we continued our Q&A session with Kamlesh and Arvin in the second server room which is dedictated to shared environments. On first thought it should be well-noted that there is lots of space for full-sized racks and therefore co-location of your own hardware. Actually, given the feedback that there will be upcoming changes in prices the facilities at the Emtel data centre are getting more and more competitive and interesting for local companies, especially small and medium enterprises. After seeing this world-class infrastructure available on the island, I'm already considering of moving one of my root servers abroad to be co-located here on the island. This would provide an improved user experience in terms of site performance and latency. This would be a good improvement, especially for upcoming e-commerce solutions for two of my local clients. Later on, we actually started the conversation of additional services that could be a catalyst for the local market in order to attract more small and medium companies to take the data centre into their evaluations regarding online activities. Until today Emtel does not provide virtualised server environments but there might be ongoing plans in the future to cover this field as well. Emtel is a mobile operator and internet connectivity provider in the first place, entering a market of managed and virtualised server infrastructures including capacities in terms of cloud storage and computing are rather new and there is a continuous learning curve at Emtel, too. You cannot just jump into a new market and see how it works out... And I appreciate Emtel's approach towards a solid fundament and then building new services on top of that. Emtel as a future one-stop-shop service provider for all your internet and telecommunications needs. Emtel's promotional video about their TIER 3 data centre in Arsenal, Mauritius More details are thoroughly described in Emtel's brochure of their data centre. Check out their PDF document here. Thanks for this opportunity Visiting and walking through the Emtel data centre for more than 2 hours was a great experience. As representative of the Mauritius Software Craftsmanship Community (MSCC) I would like to thank anyone at Emtel involved in the process of making it happen, and especially to Arvin Lockee and Kamlesh Bokhoree for their time and patience in explaining the infrastructure and answering all the endless questions from our members. Thank You!

  Read the article

• Brighton Rocks: UA Europe 2011

  - by ultan o'broin

  User Assistance Europe 2011 was held in Brighton, UK. Having seen Quadrophenia a dozen times, I just had to go along (OK, I wanted to talk about messages in enterprise applications). Sadly, it rained a lot, though that was still eminently more tolerable than being stuck home in Dublin during Bloomsday. So, here are my somewhat selective highlights and observations from the conference, massively skewed towards my own interests, as usual. Enjoyed Leah Guren's (Cow TC) great start ‘keynote’ on the Cultural Dimensions of Software Help Usage. Starting out by revisiting Hofstede's and Hall's work on culture (how many times I have done this for Multilingual magazine?) and then Neilsen’s findings on age as an indicator of performance, Leah showed how it is the expertise of the user that user assistance (UA) needs to be designed for (especially for high-end users), with some considerations made for age, while the gender and culture of users are not major factors. Help also needs to be contextual and concise, embedded close to the action. That users are saying things like “If I want help on Office, I go to Google ” isn't all that profound at this stage, but it is always worth reiterating how search can be optimized to return better results for users. Interestingly, regardless of user education level, the issue of information quality--hinging on the lynchpin of terminology reflecting that of the user--is critical. Major takeaway for me there. Matthew Ellison’s sessions on embedded help and demos were also impressive. Embedded help that is concise and contextual is definitely a powerful UX enabler, and I’m pleased to say that in Oracle Fusion Applications we have embraced the concept fully. Matthew also mentioned in his session about successful software demos that the principle of modality with demos is a must. Look no further than Oracle User Productivity Kit demos See It!, Try It!, Know It, and Do It! modes, for example. I also found some key takeaways in the presentation by Marie-Louise Flacke on notes and warnings. Here, legal considerations seemed to take precedence over providing any real information to users. I was delighted when Marie-Louise called out the Oracle JDeveloper documentation as an exemplar of how to use notes and instructions instead of trying to scare the bejaysus out of people and not providing them with any real information they’d find useful instead. My own session on designing messages for enterprise applications was well attended. Knowing your user profiles (remember user expertise is the king maker for UA so write for each audience involved), how users really work, the required application business and UI rules, what your application technology supports, and how messages integrate with the enterprise help desk and support policies and you will go much further than relying solely on the guideline of "writing messages in plain language". And, remember the value in warnings and confirmation messages too, and how you can use them smartly. I hope y’all got something from my presentation and from my answers to questions afterwards. Ellis Pratt stole the show with his presentation on applying game theory to software UA, using plenty of colorful, relevant examples (check out the Atlassian and DropBox approaches, for example), and striking just the right balance between theory and practice. Completely agree that the approach to take here is not to make UA itself a game, but to invoke UA as part of a bigger game dynamic (time-to-task completion, personal and communal goals, personal achievement and status, and so on). Sure there are gotchas and limitations to gamification, and we need to do more research. However, we'll hear a lot more about this subject in coming years, particularly in the enterprise space. I hope. I also heard good things about the different sessions about DITA usage (including one by Sonja Fuga that clearly opens the door for major innovation in the community content space using WordPress), the progressive disclosure of information (Cerys Willoughby), an overview of controlled language (or "information quality", as I like to position it) solutions and rationale by Dave Gash, and others. I also spent time chatting with Mike Hamilton of MadCap Software, who showed me a cool demo of their Flare product, and the Lingo translation solution. I liked the idea of their licensing model for workers-on-the-go; that’s smart UX-awareness in itself. Also chatted with Julian Murfitt of Mekon about uptake of DITA in the enterprise space. In all, it's worth attending UA Europe. I was surprised, however, not to see conference topics about mobile UA, community conversation and content, and search in its own right. These are unstoppable forces now, and the latter is pretty central to providing assistance now to all but the most irredentist of hard-copy fetishists or advanced technical or functional users working away on the back end of applications and systems. Only saw one iPad too (says the guy who carries three laptops). Tweeting during the conference was pretty much nonexistent during the event, so no community energy there. Perhaps all this can be addressed next year. I would love to see the next UA Europe event come to Dublin (despite Bloomsday, it's not a bad place place, really) now that hotels are so cheap and all. So, what is my overall impression of the state of user assistance in Europe? Clearly, there are still many people in the industry who feel there is something broken with the traditional forms of user assistance (particularly printed doc) and something needs to be done about it. I would suggest they move on and try and embrace change, instead. Many others see new possibilities, offered by UX and technology, as well as the reality of online user behavior in an increasingly connected world and that is encouraging. Such thought leaders need to be listened to. As Ellis Pratt says in his great book, Trends in Technical Communication - Rethinking Help: “To stay relevant means taking a new perspective on the role (of technical writer), and delivering “products” over and above the traditional manual and online Help file... there are a number of new trends in this field - some complementary, some conflicting. Whatever trends emerge as the norm, it’s likely the status quo will change.” It already has, IMO. I hear similar debates in the professional translation world about the onset of translation crowd sourcing (the Facebook model) and machine translation (trust me, that battle is over). Neither of these initiatives has put anyone out of a job and probably won't, though the nature of the work might change. If anything, such innovations have increased the overall need for professional translators as user expectations rise, new audiences emerge, and organizations need to collate and curate user-generated content, combining it with their own. Perhaps user assistance professionals can learn from other professions and grow accordingly.

  Read the article

• Announcing Windows Azure Mobile Services

  - by ScottGu

  I’m excited to announce a new capability we are adding to Windows Azure today: Windows Azure Mobile Services Windows Azure Mobile Services makes it incredibly easy to connect a scalable cloud backend to your client and mobile applications.  It allows you to easily store structured data in the cloud that can span both devices and users, integrate it with user authentication, as well as send out updates to clients via push notifications. Today’s release enables you to add these capabilities to any Windows 8 app in literally minutes, and provides a super productive way for you to quickly build out your app ideas.  We’ll also be adding support to enable these same scenarios for Windows Phone, iOS, and Android devices soon. Read this getting started tutorial to walkthrough how you can build (in less than 5 minutes) a simple Windows 8 “Todo List” app that is cloud enabled using Windows Azure Mobile Services.  Or watch this video of me showing how to do it step by step. Getting Started If you don’t already have a Windows Azure account, you can sign up for a no-obligation Free Trial.  Once you are signed-up, click the “preview features” section under the “account” tab of the www.windowsazure.com website and enable your account to support the “Mobile Services” preview.   Instructions on how to enable this can be found here. Once you have the mobile services preview enabled, log into the Windows Azure Portal, click the “New” button and choose the new “Mobile Services” icon to create your first mobile backend.  Once created, you’ll see a quick-start page like below with instructions on how to connect your mobile service to an existing Windows 8 client app you have already started working on, or how to create and connect a brand-new Windows 8 client app with it: Read this getting started tutorial to walkthrough how you can build (in less than 5 minutes) a simple Windows 8 “Todo List” app  that stores data in Windows Azure. Storing Data in the Cloud Storing data in the cloud with Windows Azure Mobile Services is incredibly easy.  When you create a Windows Azure Mobile Service, we automatically associate it with a SQL Database inside Windows Azure.  The Windows Azure Mobile Service backend then provides built-in support for enabling remote apps to securely store and retrieve data from it (using secure REST end-points utilizing a JSON-based ODATA format) – without you having to write or deploy any custom server code.  Built-in management support is provided within the Windows Azure portal for creating new tables, browsing data, setting indexes, and controlling access permissions. This makes it incredibly easy to connect client applications to the cloud, and enables client developers who don’t have a server-code background to be productive from the very beginning.  They can instead focus on building the client app experience, and leverage Windows Azure Mobile Services to provide the cloud backend services they require.  Below is an example of client-side Windows 8 C#/XAML code that could be used to query data from a Windows Azure Mobile Service.  Client-side C# developers can write queries like this using LINQ and strongly typed POCO objects, which are then translated into HTTP REST queries that run against a Windows Azure Mobile Service.   Developers don’t have to write or deploy any custom server-side code in order to enable client-side code below to execute and asynchronously populate their client UI: Because Mobile Services is part of Windows Azure, developers can later choose to augment or extend their initial solution and add custom server functionality and more advanced logic if they want.  This provides maximum flexibility, and enables developers to grow and extend their solutions to meet any needs. User Authentication and Push Notifications Windows Azure Mobile Services also make it incredibly easy to integrate user authentication/authorization and push notifications within your applications.  You can use these capabilities to enable authentication and fine grain access control permissions to the data you store in the cloud, as well as to trigger push notifications to users/devices when the data changes.  Windows Azure Mobile Services supports the concept of “server scripts” (small chunks of server-side script that executes in response to actions) that make it really easy to enable these scenarios. Below are some tutorials that walkthrough common authentication/authorization/push scenarios you can do with Windows Azure Mobile Services and Windows 8 apps: Enabling User Authentication Authorizing Users  Get Started with Push Notifications Push Notifications to multiple Users Manage and Monitor your Mobile Service Just like with every other service in Windows Azure, you can monitor usage and metrics of your mobile service backend using the “Dashboard” tab within the Windows Azure Portal. The dashboard tab provides a built-in monitoring view of the API calls, Bandwidth, and server CPU cycles of your Windows Azure Mobile Service.   You can also use the “Logs” tab within the portal to review error messages.  This makes it easy to monitor and track how your application is doing. Scale Up as Your Business Grows Windows Azure Mobile Services now allows every Windows Azure customer to create and run up to 10 Mobile Services in a free, shared/multi-tenant hosting environment (where your mobile backend will be one of multiple apps running on a shared set of server resources).  This provides an easy way to get started on projects at no cost beyond the database you connect your Windows Azure Mobile Service to (note: each Windows Azure free trial account also includes a 1GB SQL Database that you can use with any number of apps or Windows Azure Mobile Services). If your client application becomes popular, you can click the “Scale” tab of your Mobile Service and switch from “Shared” to “Reserved” mode.  Doing so allows you to isolate your apps so that you are the only customer within a virtual machine.  This allows you to elastically scale the amount of resources your apps use – allowing you to scale-up (or scale-down) your capacity as your traffic grows: With Windows Azure you pay for compute capacity on a per-hour basis – which allows you to scale up and down your resources to match only what you need.  This enables a super flexible model that is ideal for new mobile app scenarios, as well as startups who are just getting going.  Summary I’ve only scratched the surface of what you can do with Windows Azure Mobile Services – there are a lot more features to explore.  With Windows Azure Mobile Services you’ll be able to build mobile app experiences faster than ever, and enable even better user experiences – by connecting your client apps to the cloud. Visit the Windows Azure Mobile Services development center to learn more, and build your first Windows 8 app connected with Windows Azure today.  And read this getting started tutorial to walkthrough how you can build (in less than 5 minutes) a simple Windows 8 “Todo List” app that is cloud enabled using Windows Azure Mobile Services. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Updating a SharePoint master page via a solution (WSP)

  - by Kelly Jones

  In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package.  As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint.  You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page.  Manually uploading your master page to the master page gallery might be the best option, depending on your environment.  For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages.  Are they using the SharePoint dynamic token or the static token for the master page reference?  The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update.  So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery.  If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page.  In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token.  Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver.  For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case.  You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in.  I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5:   6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7:   8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24:   25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29:   30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42:   43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48:   49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54:   55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56:   57: FileStream fs = File.OpenRead(filePath); 58:   59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60:   61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75:   76: } 77:   78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85:   86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89:   90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102:   103: return curweb; 104: } This did the trick.  It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!).  I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

  Read the article

• Coming to OpenWorld? A must attend session…

  - by Ruma Sanyal

  Normal 0 false false false EN-US X-NONE X-NONE NTT Docomo, Inc. is the predominant mobile phone operator in Japan. The name is officially an abbreviation of the phrase, "do communications over the mobile network", and is also from a compound word dokomo, meaning "everywhere" in Japanese.  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One of the most important of NTT Docomo’s systems is ALADIN, which is a nationwide operating system shared with its eight regional subsidiaries. ALADIN has five primary functions: customer management, phone number management, information processing and storage, sales information management, and credit investigation. To enhance cost efficiency and help ensure stable operation of ALADIN, NTT Docomo has employed Oracle WebLogic Server as a new application platform. Further information on this can be found here. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Last year at OpenWorld, NTT Docomo was honored as an Innovation Award Winner for: · Implementing real time sales and contract management system enabling all services requested by customers for immediate activations before customer leaves the Docomo store · A robust disaster recovery strategy, room to grow the business, and ability to move custom Java development to a platform with built in standards - WebLogic · Better performance, better reliability, better stability, and smooth migration v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet This Year's Most Impressive Innovators! This year we continue to honor customers for their most innovative and cutting-edge solutions using Oracle Fusion Middleware. Join us in celebrating award recipients’ great achievements and commitment to innovation.   Oracle Fusion Middleware: Meet This Year's Most Impressive Innovators Session ID: CON7029 Tuesday September 30, 2014 @ 5-5:45 pm (PST) Yerba Buena Center for the Arts  YBCA Theater (next to Moscone North) 700 Howard St., San Francisco, CA, 94103 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Replication Services as ETL extraction tool

  - by jorg

  In my last blog post I explained the principles of Replication Services and the possibilities it offers in a BI environment. One of the possibilities I described was the use of snapshot replication as an ETL extraction tool: “Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!” Well I have tried it out and I must say it worked well. I was able to let replication services do work in a fraction of the time it would cost me to do the same in SSIS. What I did was the following: Configure snapshot replication for some Adventure Works tables, this was quite simple and straightforward. Create an SSIS package that executes the snapshot replication on demand and waits for its completion. This is something that you can’t do with out of the box functionality. While configuring the snapshot replication two SQL Agent Jobs are created, one for the creation of the snapshot and one for the distribution of the snapshot. Unfortunately these jobs are  asynchronous which means that if you execute them they immediately report back if the job started successfully or not, they do not wait for completion and report its result afterwards. So I had to create an SSIS package that executes the jobs and waits for their completion before the rest of the ETL process continues. Fortunately I was able to create the SSIS package with the desired functionality. I have made a step-by-step guide that will help you configure the snapshot replication and I have uploaded the SSIS package you need to execute it. Configure snapshot replication   The first step is to create a publication on the database you want to replicate. Connect to SQL Server Management Studio and right-click Replication, choose for New.. Publication…   The New Publication Wizard appears, click Next Choose your “source” database and click Next Choose Snapshot publication and click Next   You can now select tables and other objects that you want to publish Expand Tables and select the tables that are needed in your ETL process In the next screen you can add filters on the selected tables which can be very useful. Think about selecting only the last x days of data for example. Its possible to filter out rows and/or columns. In this example I did not apply any filters. Schedule the Snapshot Agent to run at a desired time, by doing this a SQL Agent Job is created which we need to execute from a SSIS package later on. Next you need to set the Security Settings for the Snapshot Agent. Click on the Security Settings button.   In this example I ran the Agent under the SQL Server Agent service account. This is not recommended as a security best practice. Fortunately there is an excellent article on TechNet which tells you exactly how to set up the security for replication services. Read it here and make sure you follow the guidelines!   On the next screen choose to create the publication at the end of the wizard Give the publication a name (SnapshotTest) and complete the wizard   The publication is created and the articles (tables in this case) are added Now the publication is created successfully its time to create a new subscription for this publication.   Expand the Replication folder in SSMS and right click Local Subscriptions, choose New Subscriptions   The New Subscription Wizard appears   Select the publisher on which you just created your publication and select the database and publication (SnapshotTest)   You can now choose where the Distribution Agent should run. If it runs at the distributor (push subscriptions) it causes extra processing overhead. If you use a separate server for your ETL process and databases choose to run each agent at its subscriber (pull subscriptions) to reduce the processing overhead at the distributor. Of course we need a database for the subscription and fortunately the Wizard can create it for you. Choose for New database   Give the database the desired name, set the desired options and click OK You can now add multiple SQL Server Subscribers which is not necessary in this case but can be very useful.   You now need to set the security settings for the Distribution Agent. Click on the …. button Again, in this example I ran the Agent under the SQL Server Agent service account. Read the security best practices here   Click Next   Make sure you create a synchronization job schedule again. This job is also necessary in the SSIS package later on. Initialize the subscription at first synchronization Select the first box to create the subscription when finishing this wizard Complete the wizard by clicking Finish The subscription will be created In SSMS you see a new database is created, the subscriber. There are no tables or other objects in the database available yet because the replication jobs did not ran yet. Now expand the SQL Server Agent, go to Jobs and search for the job that creates the snapshot:   Rename this job to “CreateSnapshot” Now search for the job that distributes the snapshot:   Rename this job to “DistributeSnapshot” Create an SSIS package that executes the snapshot replication We now need an SSIS package that will take care of the execution of both jobs. The CreateSnapshot job needs to execute and finish before the DistributeSnapshot job runs. After the DistributeSnapshot job has started the package needs to wait until its finished before the package execution finishes. The Execute SQL Server Agent Job Task is designed to execute SQL Agent Jobs from SSIS. Unfortunately this SSIS task only executes the job and reports back if the job started succesfully or not, it does not report if the job actually completed with success or failure. This is because these jobs are asynchronous. The SSIS package I’ve created does the following: It runs the CreateSnapshot job It checks every 5 seconds if the job is completed with a for loop When the CreateSnapshot job is completed it starts the DistributeSnapshot job And again it waits until the snapshot is delivered before the package will finish successfully Quite simple and the package is ready to use as standalone extract mechanism. After executing the package the replicated tables are added to the subscriber database and are filled with data:   Download the SSIS package here (SSIS 2008) Conclusion In this example I only replicated 5 tables, I could create a SSIS package that does the same in approximately the same amount of time. But if I replicated all the 70+ AdventureWorks tables I would save a lot of time and boring work! With replication services you also benefit from the feature that schema changes are applied automatically which means your entire extract phase wont break. Because a snapshot is created using the bcp utility (bulk copy) it’s also quite fast, so the performance will be quite good. Disadvantages of using snapshot replication as extraction tool is the limitation on source systems. You can only choose SQL Server or Oracle databases to act as a publisher. So if you plan to build an extract phase for your ETL process that will invoke a lot of tables think about replication services, it would save you a lot of time and thanks to the Extract SSIS package I’ve created you can perfectly fit it in your usual SSIS ETL process.

  Read the article

• Thank You for a Great Welcome for Oracle GoldenGate 11g Release 2

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Yesterday morning we had two launch webcasts for Oracle GoldenGate 11g Release 2. I had the pleasure to present, as well as moderate the Q&A panels in both of these webcasts. Both events had hundreds of live attendees, sending us over 150 questions. Even though we left 30 minutes for Q&A, it was not nearly enough time to address for all the insightful questions our audience sent. Our product management team and I really appreciate the interaction we had yesterday and we are starting to respond back with outstanding questions today. Oracle GoldenGate’s new release launch also had great welcome from the media. You can find the links for various articles on the new release below: ITBusinessEdge Oracle Embraces Cross-Platform Data Integration Information Week: Oracle Real-Time Advance Taps Compressed Data Integration Developer News, Oracle GoldenGate Adds Deeper Oracle Integration, Extends Real-Time Performance CIO, Oracle GoldenGate Buddies Up with Sibling Software DBTA, Real-Time Data Integration: Oracle GoldenGate 11g Release 2 Now Available CBR Oracle unveils GoldenGate 11g Release 2 real-time data integration application In this blog, I want to address some of the frequently asked questions that came up during the webcasts. You can find the top questions and their answers along with related resources below. We will continue to address frequently asked questions via future blogs. Q: Will the new Integrated Capture for Oracle Database replace the Classic Capture? If not, which one do I use when? A: No, Classic Capture will be around for long time. Core platform specific features, bug fixes, and patches will be available for both Capture processes.Oracle Database specific features will be only available in the Integrated Capture. The Integrated Capture for Oracle Database is an option for users that need to capture data from compressed tables or need support for XML data types, XA on RAC. Users who don’t leverage these features should continue to use our Classic Capture. For more information on Oracle GoldenGate 11g Release 2 I recommend to check out the White paper: Oracle GoldenGate 11gR2 New Features as well as other technical white papers we have on OTN.                                                         For those of you coming to OpenWorld, please attend the related session: Extracting Data in Oracle GoldenGate Integrated Capture Mode, Monday Oct 1st 1:45pm Moscone South – 102 to learn more about this new feature. Q: What is new in Conflict Detection and Resolution? And how does it work? A: There are now pre-built functions to identify the conditions under which an error occurs and how to handle the record when the condition occurs. Error conditions handled include inserts into a target table where the row already exists, updates or deletes to target table rows that exist, but the original source data (before columns) do not match the existing data in the target row, and updates or deletes where the row does not exist in the target database table.Foreach of these conditions a method to handle the error is specified.  Please check out our recent blog on this topic and the White paper: Oracle GoldenGate 11gR2 New Features white paper.  Also, for those attending OpenWorld please attend the session: Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active-  Wednesday Oct 3rd  3:30pm Mascone 3000 Q: Does Oracle GoldenGate Veridata and the Management Pack require additional licenses, or is it incorporated with the GoldenGate license? A: Oracle GoldenGate Veridata and Oracle Management Pack for Oracle GoldenGate are additional products and require separate licenses. Please check out Oracle's price list here. Q: Does GoldenGate - Oracle Enterprise Manager Plug-in require additional license? A: Oracle Enterprise Manager Plug-in is included in the Oracle Management Pack for Oracle GoldenGate license, which is separate from Oracle GoldenGate license. There is no separate license for the Enterprise Manager Plug-in by itself. Oracle GoldenGate Monitor, Oracle GoldenGate Director, and Enterprise Manager Plug-in are included in the Management Pack for Oracle GoldenGate license. Please check out Management Pack for Oracle GoldenGate data sheet for more info on this product bundle. Q: Is Oracle GoldenGate replacing Oracle Streams product? A: Oracle GoldenGate is the strategic data replication product. Therefore, Oracle Streams will continue to be supported, but will not be actively enhanced. Rather, the best elements of Oracle Streams will be added to Oracle GoldenGate. Conflict management is one of them and with the latest release Oracle GoldenGate has a more advanced conflict management offering. Current customers depending on Oracle Streams will continue to be fully supported. Q: How is Oracle GoldenGate different than Oracle Data Integrator? A: Oracle Data Integrator is designed for fast bulk data movement and transformation between heterogeneous systems, while GoldenGate is designed for real-time movement of transactions between heterogeneous systems. These two products are completely complementary where GoldenGate provides low-impact real-time change data capture and delivery to a staging area on the target. And Oracle Data Integrator transforms this data and loads the DW tables. In fact, Oracle Data Integrator integrates with GoldenGate to use GoldenGate’s Capture process as one option for its CDC mechanism. We have several customers that deployed GoldenGate and ODI together to feed real-time data to their data warehousing solutions. Please also check out Oracle Data Integrator Changed Data Capture with Oracle GoldenGate Data Sheet (PDF). Thank you again very much for welcoming Oracle GoldenGate 11g Release 2 and stay in touch with us for more exciting news, updates, and events.

  Read the article

• Integrating Coherence & Java EE 6 Applications using ActiveCache

  - by Ricardo Ferreira

  OK, so you are a developer and are starting a new Java EE 6 application using the most wonderful features of the Java EE platform like Enterprise JavaBeans, JavaServer Faces, CDI, JPA e another cool stuff technologies. And your architecture need to hold piece of data into distributed caches to improve application's performance, scalability and reliability? If this is your current facing scenario, maybe you should look closely in the solutions provided by Oracle WebLogic Server. Oracle had integrated WebLogic Server and its champion data caching technology called Oracle Coherence. This seamless integration between this two products provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency, since Oracle provides an DI ("Dependency Injection") mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache. In this article, I will show you how to configure ActiveCache in WebLogic and at your Java EE application. Configuring WebLogic to manage Coherence Before you start changing your application to use Coherence, you need to configure your Coherence distributed cache. The good news is, you can manage all this stuff without writing a single line of code of XML or even Java. This configuration can be done entirely in the WebLogic administration console. The first thing to do is the setup of a Coherence cluster. A Coherence cluster is a set of Coherence JVMs configured to form one single view of the cache. This means that you can insert or remove members of the cluster without the client application (the application that generates or consume data from the cache) knows about the changes. This concept allows your solution to scale-out without changing the application server JVMs. You can growth your application only in the data grid layer. To start the configuration, you need to configure an machine that points to the server in which you want to execute the Coherence JVMs. WebLogic Server allows you to do this very easily using the Administration Console. In this example, I will call the machine as "coherence-server". Remember that in order to the machine concept works, you need to ensure that the NodeManager are being executed in the target server that the machine points to. The NodeManager executable can be found in <WLS_HOME>/server/bin/startNodeManager.sh. The next thing to do is to configure a Coherence cluster. In the WebLogic administration console, go to Environment > Coherence Clusters and click in "New". Call this Coherence cluster of "my-coherence-cluster". Click in next. Specify a valid cluster address and port. The Coherence members will communicate with each other through this address and port. Our Coherence cluster are now configured. Now it is time to configure the Coherence members and add them to this cluster. In the WebLogic administration console, go to Environment > Coherence Servers and click in "New". In the field "Name" set to "coh-server-1". In the field "Machine", associate this Coherence server to the machine "coherence-server". In the field "Cluster", associate this Coherence server to the cluster named "my-coherence-cluster". Click in "Finish". Start the Coherence server using the "Control" tab of WebLogic administration console. This will instruct WebLogic to start a new JVM of Coherence in the target machine that should join the pre-defined Coherence cluster. Configuring your Java EE Application to Access Coherence Now lets pass to the funny part of the configuration. The first thing to do is to inform your Java EE application which Coherence cluster to join. Oracle had updated WebLogic server deployment descriptors so you will not have to change your code or the containers deployment descriptors like application.xml, ejb-jar.xml or web.xml. In this example, I will show you how to enable DI ("Dependency Injection") to a Coherence cache from a Servlet 3.0 component. In the WEB-INF/weblogic.xml deployment descriptor, put the following metadata information: <?xml version="1.0" encoding="UTF-8"?> <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.4/weblogic-web-app.xsd"> <wls:context-root>myWebApp</wls:context-root> <wls:coherence-cluster-ref> <wls:coherence-cluster-name>my-coherence-cluster</wls:coherence-cluster-name> </wls:coherence-cluster-ref> </wls:weblogic-web-app> As you can see, using the "coherence-cluster-name" tag, we are informing our Java EE application that it should join the "my-coherence-cluster" when it loads in the web container. Without this information, the application will not be able to access the predefined Coherence cluster. It will form its own Coherence cluster without any members. So never forget to put this information. Now put the coherence.jar and active-cache-1.0.jar dependencies at your WEB-INF/lib application classpath. You need to deploy this dependencies so ActiveCache can automatically take care of the Coherence cluster join phase. This dependencies can be found in the following locations: - <WLS_HOME>/common/deployable-libraries/active-cache-1.0.jar - <COHERENCE_HOME>/lib/coherence.jar Finally, you need to write down the access code to the Coherence cache at your Servlet. In the following example, we have a Servlet 3.0 component that access a Coherence cache named "transactions" and prints into the browser output the content (the ammount property) of one specific transaction. package com.oracle.coherence.demo.activecache; import java.io.IOException; import javax.annotation.Resource; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.tangosol.net.NamedCache; @WebServlet("/demo/specificTransaction") public class TransactionServletExample extends HttpServlet { @Resource(mappedName = "transactions") NamedCache transactions; protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int transId = Integer.parseInt(request.getParameter("transId")); Transaction transaction = (Transaction) transactions.get(transId); response.getWriter().println("<center>" + transaction.getAmmount() + "</center>"); } } Thats it! No more configuration is necessary and you have all set to start producing and getting data to/from Coherence. As you can see in the example code, the Coherence cache are treated as a normal dependency in the Java EE container. The magic happens behind the scenes when the ActiveCache allows your application to join the defined Coherence cluster. The most interesting thing about this approach is, no matter which type of Coherence cache your are using (Distributed, Partitioned, Replicated, WAN-Remote) for the client application, it is just a simple attribute member of com.tangosol.net.NamedCache type. And its all managed by the Java EE container as an dependency. This means that if you inject the same dependency (the Coherence cache named "transactions") in another Java EE component (JSF managed-bean, Stateless EJB) the cache will be the same. Cool isn't it? Thanks to the CDI technology, we can extend the same support for non-Java EE standards components like simple POJOs. This means that you are not forced to only use Servlets, EJBs or JSF in order to inject Coherence caches. You can do the same approach for regular POJOs created for you and managed by lightweight containers like Spring or Seam.

  Read the article

• My Code Kata–A Solution Kata

  - by Glav

  There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

  Read the article

• MySQL Cluster 7.3 Labs Release – Foreign Keys Are In!

  - by Mat Keep

  0 0 1 1097 6254 Homework 52 14 7337 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Summary (aka TL/DR): Support for Foreign Key constraints has been one of the most requested feature enhancements for MySQL Cluster. We are therefore extremely excited to announce that Foreign Keys are part of the first Labs Release of MySQL Cluster 7.3 – available for download, evaluation and feedback now! (Select the mysql-cluster-7.3-labs-June-2012 build) In this blog, I will attempt to discuss the design rationale, implementation, configuration and steps to get started in evaluating the first MySQL Cluster 7.3 Labs Release. Pace of Innovation It was only a couple of months ago that we announced the General Availability (GA) of MySQL Cluster 7.2, delivering 1 billion Queries per Minute, with 70x higher cross-shard JOIN performance, Memcached NoSQL key-value API and cross-data center replication.  This release has been a huge hit, with downloads and deployments quickly reaching record levels. The announcement of the first MySQL Cluster 7.3 Early Access lab release at today's MySQL Innovation Day event demonstrates the continued pace in Cluster development, and provides an opportunity for the community to evaluate and feedback on new features they want to see. What’s the Plan for MySQL Cluster 7.3? Well, Foreign Keys, as you may have gathered by now (!), and this is the focus of this first Labs Release. As with MySQL Cluster 7.2, we plan to publish a series of preview releases for 7.3 that will incrementally add new candidate features for a final GA release (subject to usual safe harbor statement below*), including: - New NoSQL APIs; - Features to automate the configuration and provisioning of multi-node clusters, on premise or in the cloud; - Performance and scalability enhancements; - Taking advantage of features in the latest MySQL 5.x Server GA. Design Rationale MySQL Cluster is designed as a “Not-Only-SQL” database. It combines attributes that enable users to blend the best of both relational and NoSQL technologies into solutions that deliver web scalability with 99.999% availability and real-time performance, including: Concurrent NoSQL and SQL access to the database; Auto-sharding with simple scale-out across commodity hardware; Multi-master replication with failover and recovery both within and across data centers; Shared-nothing architecture with no single point of failure; Online scaling and schema changes; ACID compliance and support for complex queries, across shards. Native support for Foreign Key constraints enables users to extend the benefits of MySQL Cluster into a broader range of use-cases, including: - Packaged applications in areas such as eCommerce and Web Content Management that prescribe databases with Foreign Key support. - In-house developments benefiting from Foreign Key constraints to simplify data models and eliminate the additional application logic needed to maintain data consistency and integrity between tables. Implementation The Foreign Key functionality is implemented directly within MySQL Cluster’s data nodes, allowing any client API accessing the cluster to benefit from them – whether using SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA or HTTP/REST.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation. An important difference to note with the Foreign Key implementation in InnoDB is that MySQL Cluster does not support the updating of Primary Keys from within the Data Nodes themselves - instead the UPDATE is emulated with a DELETE followed by an INSERT operation. Therefore an UPDATE operation will return an error if the parent reference is using a Primary Key, unless using CASCADE action, in which case the delete operation will result in the corresponding rows in the child table being deleted. The Engineering team plans to change this behavior in a subsequent preview release. Also note that when using InnoDB "NO ACTION" is identical to "RESTRICT". In the case of MySQL Cluster “NO ACTION” means “deferred check”, i.e. the constraint is checked before commit, allowing user-defined triggers to automatically make changes in order to satisfy the Foreign Key constraints. Configuration There is nothing special you have to do here – Foreign Key constraint checking is enabled by default. If you intend to migrate existing tables from another database or storage engine, for example from InnoDB, there are a couple of best practices to observe: 1. Analyze the structure of the Foreign Key graph and run the ALTER TABLE ENGINE=NDB in the correct sequence to ensure constraints are enforced 2. Alternatively drop the Foreign Key constraints prior to the import process and then recreate when complete. Getting Started Read this blog for a demonstration of using Foreign Keys with MySQL Cluster.  You can download MySQL Cluster 7.3 Labs Release with Foreign Keys today - (select the mysql-cluster-7.3-labs-June-2012 build) If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3) Post any questions to the MySQL Cluster forum where our Engineering team will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section of this blog. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. This first Labs Release of MySQL Cluster 7.3 gives you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases. * Safe Harbor Statement This information is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

  Read the article

• How to Achieve OC4J RMI Load Balancing

  - by fip

  This is an old, Oracle SOA and OC4J 10G topic. In fact this is not even a SOA topic per se. Questions of RMI load balancing arise when you developed custom web applications accessing human tasks running off a remote SOA 10G cluster. Having returned from a customer who faced challenges with OC4J RMI load balancing, I felt there is still some confusions in the field how OC4J RMI load balancing work. Hence I decide to dust off an old tech note that I wrote a few years back and share it with the general public. Here is the tech note: Overview A typical use case in Oracle SOA is that you are building web based, custom human tasks UI that will interact with the task services housed in a remote BPEL 10G cluster. Or, in a more generic way, you are just building a web based application in Java that needs to interact with the EJBs in a remote OC4J cluster. In either case, you are talking to an OC4J cluster as RMI client. Then immediately you must ask yourself the following questions: 1. How do I make sure that the web application, as an RMI client, even distribute its load against all the nodes in the remote OC4J cluster? 2. How do I make sure that the web application, as an RMI client, is resilient to the node failures in the remote OC4J cluster, so that in the unlikely case when one of the remote OC4J nodes fail, my web application will continue to function? That is the topic of how to achieve load balancing with OC4J RMI client. Solutions You need to configure and code RMI load balancing in two places: 1. Provider URL can be specified with a comma separated list of URLs, so that the initial lookup will land to one of the available URLs. 2. Choose a proper value for the oracle.j2ee.rmi.loadBalance property, which, along side with the PROVIDER_URL property, is one of the JNDI properties passed to the JNDI lookup.(http://docs.oracle.com/cd/B31017_01/web.1013/b28958/rmi.htm#BABDGFBI) More details below: About the PROVIDER_URL The JNDI property java.name.provider.url's job is, when the client looks up for a new context at the very first time in the client session, to provide a list of RMI context The value of the JNDI property java.name.provider.url goes by the format of a single URL, or a comma separate list of URLs. A single URL. For example: opmn:ormi://host1:6003:oc4j_instance1/appName1 A comma separated list of multiple URLs. For examples:  opmn:ormi://host1:6003:oc4j_instanc1/appName, opmn:ormi://host2:6003:oc4j_instance1/appName, opmn:ormi://host3:6003:oc4j_instance1/appName When the client looks up for a new Context the very first time in the client session, it sends a query against the OPMN referenced by the provider URL. The OPMN host and port specifies the destination of such query, and the OC4J instance name and appName are actually the “where clause” of the query. When the PROVIDER URL reference a single OPMN server Let's consider the case when the provider url only reference a single OPMN server of the destination cluster. In this case, that single OPMN server receives the query and returns a list of the qualified Contexts from all OC4Js within the cluster, even though there is a single OPMN server in the provider URL. A context represent a particular starting point at a particular server for subsequent object lookup. For example, if the URL is opmn:ormi://host1:6003:oc4j_instance1/appName, then, OPMN will return the following contexts: appName on oc4j_instance1 on host1 appName on oc4j_instance1 on host2, appName on oc4j_instance1 on host3,  (provided that host1, host2, host3 are all in the same cluster) Please note that One OPMN will be sufficient to find the list of all contexts from the entire cluster that satisfy the JNDI lookup query. You can do an experiment by shutting down appName on host1, and observe that OPMN on host1 will still be able to return you appname on host2 and appName on host3. When the PROVIDER URL reference a comma separated list of multiple OPMN servers When the JNDI propery java.naming.provider.url references a comma separated list of multiple URLs, the lookup will return the exact same things as with the single OPMN server: a list of qualified Contexts from the cluster. The purpose of having multiple OPMN servers is to provide high availability in the initial context creation, such that if OPMN at host1 is unavailable, client will try the lookup via OPMN on host2, and so on. After the initial lookup returns and cache a list of contexts, the JNDI URL(s) are no longer used in the same client session. That explains why removing the 3rd URL from the list of JNDI URLs will not stop the client from getting the EJB on the 3rd server. About the oracle.j2ee.rmi.loadBalance Property After the client acquires the list of contexts, it will cache it at the client side as “list of available RMI contexts”.  This list includes all the servers in the destination cluster. This list will stay in the cache until the client session (JVM) ends. The RMI load balancing against the destination cluster is happening at the client side, as the client is switching between the members of the list. Whether and how often the client will fresh the Context from the list of Context is based on the value of the  oracle.j2ee.rmi.loadBalance. The documentation at http://docs.oracle.com/cd/B31017_01/web.1013/b28958/rmi.htm#BABDGFBI list all the available values for the oracle.j2ee.rmi.loadBalance. Value Description client If specified, the client interacts with the OC4J process that was initially chosen at the first lookup for the entire conversation. context Used for a Web client (servlet or JSP) that will access EJBs in a clustered OC4J environment. If specified, a new Context object for a randomly-selected OC4J instance will be returned each time InitialContext() is invoked. lookup Used for a standalone client that will access EJBs in a clustered OC4J environment. If specified, a new Context object for a randomly-selected OC4J instance will be created each time the client calls Context.lookup(). Please note the regardless of the setting of oracle.j2ee.rmi.loadBalance property, the “refresh” only occurs at the client. The client can only choose from the "list of available context" that was returned and cached from the very first lookup. That is, the client will merely get a new Context object from the “list of available RMI contexts” from the cache at the client side. The client will NOT go to the OPMN server again to get the list. That also implies that if you are adding a node to the server cluster AFTER the client’s initial lookup, the client would not know it because neither the server nor the client will initiate a refresh of the “list of available servers” to reflect the new node. About High Availability (i.e. Resilience Against Node Failure of Remote OC4J Cluster) What we have discussed above is about load balancing. Let's also discuss high availability. This is how the High Availability works in RMI: when the client use the context but get an exception such as socket is closed, it knows that the server referenced by that Context is problematic and will try to get another unused Context from the “list of available contexts”. Again, this list is the list that was returned and cached at the very first lookup in the entire client session.

  Read the article

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• HTML5 Input type=date Formatting Issues

  - by Rick Strahl

  One of the nice features in HTML5 is the abililty to specify a specific input type for HTML text input boxes. There a host of very useful input types available including email, number, date, datetime, month, number, range, search, tel, time, url and week. For a more complete list you can check out the MDN reference. Date input types also support automatic validation which can be useful in some scenarios but maybe can get in the way at other times. One of the more common input types, and one that can most benefit of a custom UI for selection is of course date input. Almost every application could use a decent date representation and HTML5's date input type seems to push into the right direction. It'd be nice if you could just say:<form action="DateTest.html"> <label for="FromDate">Enter a Date:</label> <input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> <hr /> <input type="submit" id="btnSubmit" name="btnSubmit" value="Save Date" class="smallbutton" /> </form> but if you'd expect to just work, you're likely to be pretty disappointed. Problem #1: Browser Support For starters there's browser support. Out of the major browsers only the latest versions of WebKit and Opera based browsers seem to support date input. Neither FireFox, nor any version of Internet Explorer (including the new touch enabled IE10 in Windows RT) support input type=date. Browser support is an issue, but it would be OK if it wasn't for problem #2. Problem #2: Date Formatting If you look at my date input from before:<input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> You can see that my date is formatted in local date format (ie. en-us). Now when I run this sadly the form that comes up in Chrome (and also iOS mobile browsers) comes up like this: Chrome isn't recognizing my local date string. Instead it's expecting my date format to be provided in ISO 8601 format which is: 2012-11-08 So if I change the date input field to:<input type="date" id="FromDate" name="FromDate" value="2012-10-08" class="date" /> I correctly get the date field filled in: Also when I pick a date with the DatePicker the date value is also returned is also set to the ISO date format. Yet notice how the date is still formatted to the local date time format (ie. en-US format). So if I pick a new date: and then save, the value field is set back to: 2012-11-15 using the ISO format. The same is true for Opera and iOS browsers and I suspect any other WebKit style browser and their date pickers. So to summarize input type=date: Expects ISO 8601 format dates to display intial values Sets selected date values to ISO 8601 Now what? This would sort of make sense, if all browsers supported input type=date. It'd be easy because you could just format dates appropriately when you set the date value into the control by applying the appropriate culture formatting (ie. .ToString("yyyy-MM-dd") ). .NET is actually smart enough to pick up the date on the other end for modelbinding when ISO 8601 is used. For other environments this might be a bit more tricky. input type=date is clearly the way to go forward. Date controls implemented in HTML are going the way of the dodo, given the intricacies of mobile platforms and scaling for both desktop and mobile. I've been using jQuery UI Datepicker for ages but once going to mobile, that's no longer an option as the control doesn't scale down well for mobile apps (at least not without major re-styling). It also makes a lot of sense for the browser to provide this functionality - creating a consistent date input experience across apps only makes sense, which is why I find it baffling that neither FireFox nor IE 10 deign it necessary to support date input natively. The problem is that a large number of even the latest and greatest browsers don't support this. So now you're stuck with not knowing what date format you have to serve since neither the local format, nor the ISO format works in all cases. For my current app I just broke down and used the ISO format and so I'll live with the non-local date format. <input type="date" id="ToDate" name="ToDate" value="2012-11-08" class="date"/> Here's what this looks like on Chrome: Here's what it looks like on my iPhone: Both Chrome and the phone do this the way it should be. For the phone especially this demonstrates why we'd want this - the built-in date picker there certainly beats manually trying to edit the date using finger gymnastics, and it's one of the easiest ways to pick a date I can think of (ie. easier to use than your typical date picker). Finally here's what the date looks like in FireFox: Certainly this is not the ideal date format, but it's clear enough I suppose. If users enter a date in local US format and that works as well (but won't work for other locales). It'll have to do. Over time one can only hope that other browsers will finally decide to implement this functionality natively to provide a unique experience. Until then, incomplete solutions it is. Related Posts Html 5 Input Types - How useful is this really going to be?© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Fun with Declarative Components

  - by [email protected]

  Use case background I have been asked on a number of occasions if our selectOneChoice component could allow random text to be entered, as well as having a list of selections available. Unfortunately, the selectOneChoice component only allows entry via the dropdown selection list and doesn't allow text entry. I was thinking of possible solutions and thought that this might make a good example for using a declarative component.My initial idea My first thought was to use an af:inputText to allow the text entry, and an af:selectOneChoice with mode="compact" for the selections. To get it to layout horizontally, we would want to use an af:panelGroupLayout with layout="horizontal". To get the label for this to line up correctly, we'll need to wrap the af:panelGroupLayout with an af:panelLabelAndMessage. This is the basic structure: <af:panelLabelAndMessage> <af:panelGroupLayout layout="horizontal"> <af:inputText/> <af:selectOneChoice mode="compact"/> </af:panelgroupLayout></af:panelLabelAndMessage> Make it into a declarative component One of the steps to making a declarative component is deciding what attributes we want to be able to specify. To keep this example simple, let's just have: 'label' (the label of our declarative component)'value' (what we want to bind to the value of the input text)'items' (the select items in our dropdown) Here is the initial declarative component code (saved as file "inputTextWithChoice.jsff"): <?xml version='1.0' encoding='UTF-8'?><!-- Copyright (c) 2008, Oracle and/or its affiliates. All rights reserved. --><jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <jsp:directive.page contentType="text/html;charset=utf-8"/> <af:componentDef var="attrs" componentVar="comp"> <af:xmlContent> <component xmlns="http://xmlns.oracle.com/adf/faces/rich/component"> <description>Input text with choice component.</description> <attribute> <description>Label</description> <attribute-name>label</attribute-name> <attribute-class>java.lang.String</attribute-class> </attribute> <attribute> <description>Value</description> <attribute-name>value</attribute-name> <attribute-class>java.lang.Object</attribute-class> </attribute> <attribute> <description>Choice Select Items Value</description> <attribute-name>items</attribute-name> <attribute-class>[[Ljavax.faces.model.SelectItem;</attribute-class> </attribute> </component> </af:xmlContent> <af:panelLabelAndMessage id="myPlm" label="#{attrs.label}" for="myIt"> <af:panelGroupLayout id="myPgl" layout="horizontal"> <af:inputText id="myIt" value="#{attrs.value}" partialTriggers="mySoc" label="myIt" simple="true" /> <af:selectOneChoice id="mySoc" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <f:selectItems id="mySIs" value="#{attrs.items}" /> </af:selectOneChoice> </af:panelGroupLayout> </af:panelLabelAndMessage> </af:componentDef></jsp:root> By having af:inputText and af:selectOneChoice both have the same value, then (assuming that this passed in as an EL expression) selecting something in the selectOneChoice will update the value in the af:inputText. To use this declarative component in a jspx page: <af:declarativeComponent id="myItwc" viewId="inputTextWithChoice.jsff" label="InputText with Choice" value="#{demoInput.choiceValue}" items="#{demoInput.selectItems}" /> Some problems arise At first glace, this seems to be functioning like we want it to. However, there is a side effect to having the af:inputText and af:selectOneChoice share a value, if one changes, so does the other. The problem here is that when we update the af:inputText to something that doesn't match one of the selections in the af:selectOneChoice, the af:selectOneChoice will set itself to null (since the value doesn't match one of the selections) and the next time the page is submitted, it will submit the null value and the af:inputText will be empty. Oops, we don't want that. Hmm, what to do. Okay, how about if we make sure that the current value is always available in the selection list. But, lets not render it if the value is empty. We also need to add a partialTriggers attribute so that this gets updated when the af:inputText is changed. Plus, we really don't want to select this item so let's disable it. <af:selectOneChoice id="mySoc" partialTriggers="myIt" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> That seems to be working pretty good. One minor issue that we probably can't do anything about is that when you enter something in the inputText and then click on the selectOneChoice, the popup is displayed, but then goes away because it has been replaced via PPR because we told it to with the partialTriggers="myIt". This is not that big a deal, since if you are entering something manually, you probably don't want to select something from the list right afterwards. Making it look like a single component. Now, let's play around a bit with the contentStyle of the af:inputText and the af:selectOneChoice so that the compact icon will layout inside the af:inputText, making it look more like an af:selectManyChoice. We need to add some padding-right to the af;inputText so there is space for the icon. These adjustments were for the Fusion FX skin. <af:inputText id="myIt" partialTriggers="mySoc" autoSubmit="true" contentStyle="padding-right: 15px;" value="#{attrs.value}" label="myIt" simple="true" /><af:selectOneChoice id="mySoc" partialTriggers="myIt" contentStyle="position: relative; top: -2px; left: -19px;" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> There you have it, a declarative component that allows for suggested selections, but also allows arbitrary text to be entered. This could be used for search field, where the 'items' attribute could be populated with popular searches. Lines of java code written: 0

  Read the article

• Service Broker, not ETL

  - by jamiet

  I have been very quiet on this blog of late and one reason for that is I have been very busy on a client project that I would like to talk about a little here. The client that I have been working for has a website that runs on a distributed architecture utilising a messaging infrastructure for communication between different endpoints. My brief was to build a system that could consume these messages and produce analytical information in near-real-time. More specifically I basically had to deliver a data warehouse however it was the real-time aspect of the project that really intrigued me. This real-time requirement meant that using an Extract transformation, Load (ETL) tool was out of the question and so I had no choice but to write T-SQL code (i.e. stored-procedures) to process the incoming messages and load the data into the data warehouse. This concerned me though – I had no way to control the rate at which data would arrive into the system yet we were going to have end-users querying the system at the same time that those messages were arriving; the potential for contention in such a scenario was pretty high and and was something I wanted to minimise as much as possible. Moreover I did not want the processing of data inside the data warehouse to have any impact on the customer-facing website. As you have probably guessed from the title of this blog post this is where Service Broker stepped in! For those that have not heard of it Service Broker is a queuing technology that has been built into SQL Server since SQL Server 2005. It provides a number of features however the one that was of interest to me was the fact that it facilitates asynchronous data processing which, in layman’s terms, means the ability to process some data without requiring the system that supplied the data having to wait for the response. That was a crucial feature because on this project the customer-facing website (in effect an OLTP system) would be calling one of our stored procedures with each message – we did not want to cause the OLTP system to wait on us every time we processed one of those messages. This asynchronous nature also helps to alleviate the contention problem because the asynchronous processing activity is handled just like any other task in the database engine and hence can wait on another task (such as an end-user query). Service Broker it was then! The stored procedure called by the OLTP system would simply put the message onto a queue and we would use a feature called activation to pick each message off the queue in turn and process it into the warehouse. At the time of writing the system is not yet up to full capacity but so far everything seems to be working OK (touch wood) and crucially our users are seeing data in near-real-time. By near-real-time I am talking about latencies of a few minutes at most and to someone like me who is used to building systems that have overnight latencies that is a huge step forward! So then, am I advocating that you all go out and dump your ETL tools? Of course not, no! What this project has taught me though is that in certain scenarios there may be better ways to implement a data warehouse system then the traditional “load data in overnight” approach that we are all used to. Moreover I have really enjoyed getting to grips with a new technology and even if you don’t want to use Service Broker you might want to consider asynchronous messaging architectures for your BI/data warehousing solutions in the future. This has been a very high level overview of my use of Service Broker and I have deliberately left out much of the minutiae of what has been a very challenging implementation. Nonetheless I hope I have caused you to reflect upon your own approaches to BI and question whether other approaches may be more tenable. All comments and questions gratefully received! Lastly, if you have never used Service Broker before and want to kick the tyres I have provided below a very simple “Service Broker Hello World” script that will create all of the objects required to facilitate Service Broker communications and then send the message “Hello World” from one place to anther! This doesn’t represent a “proper” implementation per se because it doesn’t close down down conversation objects (which you should always do in a real-world scenario) but its enough to demonstrate the capabilities! @Jamiet ----------------------------------------------------------------------------------------------- /*This is a basic Service Broker Hello World app. Have fun! -Jamie */ USE MASTER GO CREATE DATABASE SBTest GO --Turn Service Broker on! ALTER DATABASE SBTest SET ENABLE_BROKER GO USE SBTest GO -- 1) we need to create a message type. Note that our message type is -- very simple and allowed any type of content CREATE MESSAGE TYPE HelloMessage VALIDATION = NONE GO -- 2) Once the message type has been created, we need to create a contract -- that specifies who can send what types of messages CREATE CONTRACT HelloContract (HelloMessage SENT BY INITIATOR) GO --We can query the metadata of the objects we just created SELECT * FROM   sys.service_message_types WHERE name = 'HelloMessage'; SELECT * FROM   sys.service_contracts WHERE name = 'HelloContract'; SELECT * FROM   sys.service_contract_message_usages WHERE  service_contract_id IN (SELECT service_contract_id FROM sys.service_contracts WHERE name = 'HelloContract') AND        message_type_id IN (SELECT message_type_id FROM sys.service_message_types WHERE name = 'HelloMessage'); -- 3) The communication is between two endpoints. Thus, we need two queues to -- hold messages CREATE QUEUE SenderQueue CREATE QUEUE ReceiverQueue GO --more querying metatda SELECT * FROM sys.service_queues WHERE name IN ('SenderQueue','ReceiverQueue'); --we can also select from the queues as if they were tables SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   -- 4) Create the required services and bind them to be above created queues CREATE SERVICE Sender   ON QUEUE SenderQueue CREATE SERVICE Receiver   ON QUEUE ReceiverQueue (HelloContract) GO --more querying metadata SELECT * FROM sys.services WHERE name IN ('Receiver','Sender'); -- 5) At this point, we can begin the conversation between the two services by -- sending messages DECLARE @conversationHandle UNIQUEIDENTIFIER DECLARE @message NVARCHAR(100) BEGIN   BEGIN TRANSACTION;   BEGIN DIALOG @conversationHandle         FROM SERVICE Sender         TO SERVICE 'Receiver'         ON CONTRACT HelloContract WITH ENCRYPTION=OFF   -- Send a message on the conversation   SET @message = N'Hello, World';   SEND  ON CONVERSATION @conversationHandle         MESSAGE TYPE HelloMessage (@message)   COMMIT TRANSACTION END GO --check contents of queues SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   GO -- Receive a message from the queue RECEIVE CONVERT(NVARCHAR(MAX), message_body) AS MESSAGE FROM ReceiverQueue GO --If no messages were received and/or you can't see anything on the queues you may wish to check the following for clues: SELECT * FROM sys.transmission_queue -- Cleanup DROP SERVICE Sender DROP SERVICE Receiver DROP QUEUE SenderQueue DROP QUEUE ReceiverQueue DROP CONTRACT HelloContract DROP MESSAGE TYPE HelloMessage GO USE MASTER GO DROP DATABASE SBTest GO

  Read the article

• New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

  - by Alexandra Georgescu

  After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

  Read the article

• Advanced Continuous Delivery to Azure from TFS, Part 1: Good Enough Is Not Great

  - by jasont

  The folks over on the TFS / Visual Studio team have been working hard at releasing a steady stream of new features for their new hosted Team Foundation Service in the cloud. One of the most significant features released was simple continuous delivery of your solution into your Azure deployments. The original announcement from Brian Harry can be found here. Team Foundation Service is a great platform for .Net developers who are used to working with TFS on-premises. I’ve been using it since it became available at the //BUILD conference in 2011, and when I recently came to work at Stackify, it was one of the first changes I made. Managing work items is much easier than the tool we were using previously, although there are some limitations (more on that in another blog post). However, when continuous deployment was made available, it blew my mind. It was the killer feature I didn’t know I needed. Not to say that I wasn’t previously an advocate for continuous delivery; just that it was always a pain to set up and configure. Having it hosted - and a one-click setup – well, that’s just the best thing since sliced bread. It made perfect sense: my source code is in the cloud, and my deployment is in the cloud. Great! I can queue up a build from my iPad or phone and just let it go! I quickly tore through the quick setup and saw it all work… sort of. This will be the first in a three part series on how to take the building block of Team Foundation Service continuous delivery and build a CD model that will actually work for any team deploying something more advanced than a “Hello World” example. Part 1: Good Enough Is Not Great Part 2: A Model That Works: Branching and Multiple Deployment Environments Part 3: Other Considerations: SQL, Custom Tasks, Etc Good Enough Is Not Great There. I’ve said it. I certainly hope no one on the TFS team is offended, but it’s the truth. Let’s take a look under the hood and understand how it works, and then why it’s not enough to handle real world CD as-is. How it works. (note that I’ve skipped a couple of steps; I already have my accounts set up and something deployed to Azure) The first step is to establish some oAuth magic between your Azure management portal and your TFS Instance. You do this via the management portal. Once it’s done, you have a new build process template in your TFS instance. (Image lifted from the documentation) From here, you’ll get the usual prompts for security, allowing access, etc. But you’ll also get to pick which Solution in your source control to build. Here’s what the bulk of the build definition looks like. All I’ve had to do is add in the solution to build (notice that mine is from a specific branch – Release – more on that later) and I’ve changed the configuration. I trigger the build, and voila! I have an Azure deployment a few minutes later. The beauty of this is that it’s all in the cloud and I’m not waiting for my machine to compile and upload the package. (I also had to enable the build definition first – by default it is created in disabled state, probably a good thing since it will trigger on every.single.checkin by default.) I get to see a history of deployments from the Azure portal, and can link into TFS to see the associated changesets and work items. You’ll notice also that this build definition also automatically put my code in the Staging slot of my Azure deployment – more on this soon. For now, I can VIP swap and be in production. (P.S. I hate VIP swap and “production” and “staging” in Azure. More on that later too.) That’s it. That’s the default out-of-box experience. Easy, right? But it’s full of room for improvement, so let’s get into that….   The Problems Nothing is perfect (except my code – it’s always perfect), and neither is Continuous Deployment without a bit of work to help it fit your dev team’s process. So what are the issues? Issue 1: Staging vs QA vs Prod vs whatever other environments your team may have. This, for me, is the big hairy one. Remember how this automatically deployed to staging rather than prod for us? There are a couple of issues with this model: If I want to deliver to prod, it requires intervention on my part after deployment (via a VIP swap). If I truly want to promote between environments (i.e. Nightly Build –> Stable QA –> Production) I likely have configuration changes between each environment such as database connection strings and this process (and the VIP swap) doesn’t account for this. Yet. Issue 2: Branching and delivering on every check-in. As I mentioned above, I have set this up to target a specific branch – Release – of my code. For the purposes of this example, I have adopted the “basic” branching strategy as defined by the ALM Rangers. This basically establishes a “Main” trunk where you branch off Dev and Release branches. Granted, the Release branch is usually the only thing you will deploy to production, but you certainly don’t want to roll to production automatically when you merge to the Release branch and check-in (unless you like the thrill of it, and in that case, I like your style, cowboy….). Rather, you have nightly build and QA environments, or if you’ve adopted the feature-branch model you have environments for those. Those are the environments you want to continuously deploy to. But that takes us back to Issue 1: we currently have a 1:1 solution to Azure deployment target. Issue 3: SQL and other custom tasks. Let’s be honest and address the elephant in the room: I need to get some sleep because I see an elephant in the room. But seriously, I can’t think of an application I have touched in the last 10 years that doesn’t need to consider SQL changes when deploying code and upgrading an environment. Microsoft seems perfectly content to ignore this elephant for now: yes, they’ve added Data Tier Applications. But let’s be honest with ourselves again: no one really uses it, and it’s not suitable for anything more complex than a Hello World sample project database. Why? Because it doesn’t fit well into a great source control story. Developers make stored procedure and table changes all day long while coding complex applications, and if someone forgets to go update the DACPAC before the automated deployment, you have a broken build until it’s completed. Developers – not just DBAs – also like to work with SQL in SQL tools, not in Visual Studio. I’m really picking on SQL because that’s generally the biggest concern that I hear. But we need to account for any custom tasks as well in the build process.   The Solutions… ? We’ve taken a look at how this all works, and addressed the shortcomings. In my next post (which I promise will be very, very soon), I will detail how I’ve overcome these shortcomings and used this foundation to create a mature, flexible model for deploying my app – any version, any time, to any environment.

  Read the article

• Thoughts on the Nomination Committee Campaign 2014

  - by Testas

  Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again?  Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1.       Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2.       Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well.   3.       Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms?  Yes/No. What is the maximum number of terms a candidate could serve?   It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw.   So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections.   It would be good to hear your thoughts   Thanks   Chris

  Read the article

• Integrating Oracle Hyperion Smart View Data Queries with MS Word and Power Point

  - by Andreea Vaduva

  Untitled Document table { border: thin solid; } Most Smart View users probably appreciate that they can use just one add-in to access data from the different sources they might work with, like Oracle Essbase, Oracle Hyperion Planning, Oracle Hyperion Financial Management and others. But not all of them are aware of the options to integrate data analyses not only in Excel, but also in MS Word or Power Point. While in the past, copying and pasting single numbers or tables from a recent analysis in Excel made the pasted content a static snapshot, copying so called Data Points now creates dynamic, updateable references to the data source. It also provides additional nice features, which can make life easier and less stressful for Smart View users. So, how does this option work: after building an ad-hoc analysis with Smart View as usual in an Excel worksheet, any area including data cells/numbers from the database can be highlighted in order to copy data points - even single data cells only.   TIP It is not necessary to highlight and copy the row or column descriptions   Next from the Smart View ribbon select Copy Data Point. Then transfer to the Word or Power Point document into which the selected content should be copied. Note that in these Office programs you will find a menu item Smart View;from it select the Paste Data Point icon. The copied details from the Excel report will be pasted, but showing #NEED_REFRESH in the data cells instead of the original numbers. =After clicking the Refresh icon on the Smart View menu the data will be retrieved and displayed. (Maybe at that moment a login window pops up and you need to provide your credentials.) It works in the same way if you just copy one single number without any row or column descriptions, for example in order to incorporate it into a continuous text: Before refresh: After refresh: From now on for any subsequent updates of the data shown in your documents you only need to refresh data by clicking the Refresh button on the Smart View menu, without copying and pasting the context or content again. As you might realize, trying out this feature on your own, there won’t be any Point of View shown in the Office document. Also you have seen in the example, where only a single data cell was copied, that there aren’t any member names or row/column descriptions copied, which are usually required in an ad-hoc report in order to exactly define where data comes from or how data is queried from the source. Well, these definitions are not visible, but they are transferred to the Word or Power Point document as well. They are stored in the background for each individual data cell copied and can be made visible by double-clicking the data cell as shown in the following screen shot (but which is taken from another context).   So for each cell/number the complete connection information is stored along with the exact member/cell intersection from the database. And that’s not all: you have the chance now to exchange the members originally selected in the Point of View (POV) in the Excel report. Remember, at that time we had the following selection:   By selecting the Manage POV option from the Smart View meny in Word or Power Point…   … the following POV Manager – Queries window opens:   You can now change your selection for each dimension from the original POV by either double-clicking the dimension member in the lower right box under POV: or by selecting the Member Selector icon on the top right hand side of the window. After confirming your changes you need to refresh your document again. Be aware, that this will update all (!) numbers taken from one and the same original Excel sheet, even if they appear in different locations in your Office document, reflecting your recent changes in the POV. TIP Build your original report already in a way that dimensions you might want to change from within Word or Power Point are placed in the POV. And there is another really nice feature I wouldn’t like to miss mentioning: Using Dynamic Data Points in the way described above, you will never miss or need to search again for your original Excel sheet from which values were taken and copied as data points into an Office document. Because from even only one single data cell Smart View is able to recreate the entire original report content with just a few clicks: Select one of the numbers from within your Word or Power Point document by double-clicking.   Then select the Visualize in Excel option from the Smart View menu. Excel will open and Smart View will rebuild the entire original report, including POV settings, and retrieve all data from the most recent actual state of the database. (It might be necessary to provide your credentials before data is displayed.) However, in order to make this work, an active online connection to your databases on the server is necessary and at least read access to the retrieved data. But apart from this, your newly built Excel report is fully functional for ad-hoc analysis and can be used in the common way for drilling, pivoting and all the other known functions and features. So far about embedding Dynamic Data Points into Office documents and linking them back into Excel worksheets. You can apply this in the described way with ad-hoc analyses directly on Essbase databases or using Hyperion Planning and Hyperion Financial Management ad-hoc web forms. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here (please make sure to select your country/region at the top of this page) or in the OU Learning paths section , where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected] . About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis.  

  Read the article

• Is Financial Inclusion an Obligation or an Opportunity for Banks?

  - by tushar.chitra

  Why should banks care about financial inclusion? First, the statistics, I think this will set the tone for this blog post. There are close to 2.5 billion people who are excluded from the banking stream and out of this, 2.2 billion people are from the continents of Africa, Latin America and Asia (McKinsey on Society: Global Financial Inclusion). However, this is not just a third-world phenomenon. According to Federal Deposit Insurance Corp (FDIC), in the US, post 2008 financial crisis, one family out of five has either opted out of the banking system or has been moved out (American Banker). Moving this huge unbanked population into mainstream banking is both an opportunity and a challenge for banks. An obvious opportunity is the significant untapped customer base that banks can target, so is the positive brand equity a bank can build by fulfilling its social responsibilities. Also, as banks target the cost-conscious unbanked customer, they will be forced to look at ways to offer cost-effective products and services, necessitating technology upgrades and innovations. However, cost is not the only hurdle in increasing the adoption of banking services. The potential users need to be convinced of the benefits of banking and banks will also face stiff competition from unorganized players. Finally, the banks will have to believe in the viability of this business opportunity, and not treat financial inclusion as an obligation. In what ways can banks target the unbanked For financial inclusion to be a success, banks should adopt innovative business models to develop products that address the stated and unstated needs of the unbanked population and also design delivery channels that are cost effective and viable in the long run. Through business correspondents and facilitators In rural and remote areas, one of the major hurdles in increasing banking penetration is connectivity and accessibility to banking services, which makes last mile inclusion a daunting challenge. To address this, banks can avail the services of business correspondents or facilitators. This model allows banks to establish greater connectivity through a trusted and reliable intermediary. In India, for instance, banks can leverage the local Kirana stores (the mom & pop stores) to service rural and remote areas. With a supportive nudge from the central bank, the commercial banks can enlist these shop owners as business correspondents to increase their reach. Since these neighborhood stores are acquainted with the local population, they can help banks manage the KYC norms, besides serving as a conduit for remittance. Banks also have an opportunity over a period of time to cross-sell other financial products such as micro insurance, mutual funds and pension products through these correspondents. To exercise greater operational control over the business correspondents, banks can also adopt a combination of branch and business correspondent models to deliver financial inclusion. Through mobile devices According to a 2012 world bank report on financial inclusion, out of a world population of 7 billion, over 5 billion or 70% have mobile phones and only 2 billion or 30% have a bank account. What this means for banks is that there is scope for them to leverage this phenomenal growth in mobile usage to serve the unbanked population. Banks can use mobile technology to service the basic banking requirements of their customers with no frills accounts, effectively bringing down the cost per transaction. As I had discussed in my earlier post on mobile payments, though non-traditional players have taken the lead in P2P mobile payments, banks still hold an edge in terms of infrastructure and reliability. Through crowd-funding According to the Crowdfunding Industry Report by Massolution, the global crowdfunding industry raised $2.7 billion in 2012, and is projected to grow to $5.1 billion in 2013. With credit policies becoming tighter and banks becoming more circumspect in terms of loan disbursals, crowdfunding has emerged as an alternative channel for lending. Typically, these initiatives target the unbanked population by offering small loans that are unviable for larger banks. Though a significant proportion of crowdfunding initiatives globally are run by non-banking institutions, banks are also venturing into this space. The next step towards inclusive finance Banks by themselves cannot make financial inclusion a success. There is a need for a whole ecosystem that is supportive of this mission. The policy makers, that include the regulators and government bodies, must be in sync, the IT solution providers must put on their thinking caps to come out with innovative products and solutions, communication channels such as internet and mobile need to expand their reach, and the media and the public need to play an active part. The other challenge for financial inclusion is from the banks themselves. While it is true that financial inclusion will unleash a hitherto hugely untapped market, the normal banking model may be found wanting because of issues such as flexibility, convenience and reliability. The business will be viable only when there is a focus on increasing the usage of existing infrastructure and that is possible when the banks can offer the entire range of products and services to the large number of users of essential banking services. Apart from these challenges, banks will also have to quickly master and replicate the business model to extend their reach to the remotest regions in their respective geographies. They will need to ensure that the transactions deliver a viable business benefit to the bank. For tapping cross-sell opportunities, banks will have to quickly roll-out customized and segment-specific products. The bank staff should be brought in sync with the business plan by convincing them of the viability of the business model and the need for a business correspondent delivery model. Banks, in collaboration with the government and NGOs, will have to run an extensive financial literacy program to educate the unbanked about the benefits of banking. Finally, with the growing importance of retail banking and with many unconventional players eyeing the opportunity in payments and other lucrative areas of banking, banks need to understand the importance of micro and small branches. These micro and small branches can help banks increase their presence without a huge cost burden, provide bankers an opportunity to cross sell micro products and offer a window of opportunity for the large non-banked population to transact without any interference from intermediaries. These branches can also help diminish the role of the unorganized financial sector, such as local moneylenders and unregistered credit societies. This will also help banks build a brand awareness and loyalty among the users, which by itself has a cascading effect on the business operations, especially among the rural and un-banked centers. In conclusion, with the increasingly competitive banking sector facing frequent slowdowns and downturns, the unbanked population presents a huge opportunity for banks to enhance their customer base and fulfill their social responsibility.

  Read the article

• Cost Comparison Hard Disk Drive to Solid State Drive on Price per Gigabyte - dispelling a myth!

  - by tonyrogerson

  It is often said that Hard Disk Drive storage is significantly cheaper per GiByte than Solid State Devices – this is wholly inaccurate within the database space. People need to look at the cost of the complete solution and not just a single component part in isolation to what is really required to meet the business requirement. Buying a single Hitachi Ultrastar 600GB 3.5” SAS 15Krpm hard disk drive will cost approximately £239.60 (http://scan.co.uk, 22nd March 2012) compared to an OCZ 600GB Z-Drive R4 CM84 PCIe costing £2,316.54 (http://scan.co.uk, 22nd March 2012); I’ve not included FusionIO ioDrive because there is no public pricing available for it – something I never understand and personally when companies do this I immediately think what are they hiding, luckily in FusionIO’s case the product is proven though is expensive compared to OCZ enterprise offerings. On the face of it the single 15Krpm hard disk has a price per GB of £0.39, the SSD £3.86; this is what you will see in the press and this is what sales people will use in comparing the two technologies – do not be fooled by this bullshit people! What is the requirement? The requirement is the database will have a static size of 400GB kept static through archiving so growth and trim will balance the database size, the client requires resilience, there will be several hundred call centre staff querying the database where queries will read a small amount of data but there will be no hot spot in the data so the randomness will come across the entire 400GB of the database, estimates predict that the IOps required will be approximately 4,000IOps at peak times, because it’s a call centre system the IO latency is important and must remain below 5ms per IO. The balance between read and write is 70% read, 30% write. The requirement is now defined and we have three of the most important pieces of the puzzle – space required, estimated IOps and maximum latency per IO. Something to consider with regard SQL Server; write activity requires synchronous IO to the storage media specifically the transaction log; that means the write thread will wait until the IO is completed and hardened off until the thread can continue execution, the requirement has stated that 30% of the system activity will be write so we can expect a high amount of synchronous activity. The hardware solution needs to be defined; two possible solutions: hard disk or solid state based; the real question now is how many hard disks are required to achieve the IO throughput, the latency and resilience, ditto for the solid state. Hard Drive solution On a test on an HP DL380, P410i controller using IOMeter against a single 15Krpm 146GB SAS drive, the throughput given on a transfer size of 8KiB against a 40GiB file on a freshly formatted disk where the partition is the only partition on the disk thus the 40GiB file is on the outer edge of the drive so more sectors can be read before head movement is required: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 3,733 IOps at an average latency of 34.06ms (34 MiB/s). The same test was done on the same disk but the test file was 130GiB: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 528 IOps at an average latency of 217.49ms (4 MiB/s). From the result it is clear random performance gets worse as the disk fills up – I’m currently writing an article on short stroking which will cover this in detail. Given the work load is random in nature looking at the random performance of the single drive when only 40 GiB of the 146 GB is used gives near the IOps required but the latency is way out. Luckily I have tested 6 x 15Krpm 146GB SAS 15Krpm drives in a RAID 0 using the same test methodology, for the same test above on a 130 GiB for each drive added the performance boost is near linear, for each drive added throughput goes up by 5 MiB/sec, IOps by 700 IOps and latency reducing nearly 50% per drive added (172 ms, 94 ms, 65 ms, 47 ms, 37 ms, 30 ms). This is because the same 130GiB is spread out more as you add drives 130 / 1, 130 / 2, 130 / 3 etc. so implicit short stroking is occurring because there is less file on each drive so less head movement required. The best latency is still 30 ms but we have the IOps required now, but that’s on a 130GiB file and not the 400GiB we need. Some reality check here: a) the drive randomness is more likely to be 50/50 and not a full 100% but the above has highlighted the effect randomness has on the drive and the more a drive fills with data the worse the effect. For argument sake let us assume that for the given workload we need 8 disks to do the job, for resilience reasons we will need 16 because we need to RAID 1+0 them in order to get the throughput and the resilience, RAID 5 would degrade performance. Cost for hard drives: 16 x £239.60 = £3,833.60 For the hard drives we will need disk controllers and a separate external disk array because the likelihood is that the server itself won’t take the drives, a quick spec off DELL for a PowerVault MD1220 which gives the dual pathing with 16 disks 146GB 15Krpm 2.5” disks is priced at £7,438.00, note its probably more once we had two controller cards to sit in the server in, racking etc. Minimum cost taking the DELL quote as an example is therefore: {Cost of Hardware} / {Storage Required} £7,438.60 / 400 = £18.595 per GB £18.59 per GiB is a far cry from the £0.39 we had been told by the salesman and the myth. Yes, the storage array is composed of 16 x 146 disks in RAID 10 (therefore 8 usable) giving an effective usable storage availability of 1168GB but the actual storage requirement is only 400 and the extra disks have had to be purchased to get the  IOps up. Solid State Drive solution A single card significantly exceeds the IOps and latency required, for resilience two will be required. ( £2,316.54 * 2 ) / 400 = £11.58 per GB With the SSD solution only two PCIe sockets are required, no external disk units, no additional controllers, no redundant controllers etc. Conclusion I hope by showing you an example that the myth that hard disk drives are cheaper per GiB than Solid State has now been dispelled - £11.58 per GB for SSD compared to £18.59 for Hard Disk. I’ve not even touched on the running costs, compare the costs of running 18 hard disks, that’s a lot of heat and power compared to two PCIe cards!Just a quick note: I've left a fair amount of information out due to this being a blog! If in doubt, email me :)I'll also deal with the myth that SSD's wear out at a later date as well - that's just way over done still, yes, 5 years ago, but now - no.

  Read the article

• Next-Generation Data Integration on Oracle Exadata

  - by Julien Testut

  Normal 0 false false false EN-US X-NONE X-NONE Companies are currently faced with increasing data volumes and retention times while simultaneously batch windows are shrinking. In the ‘Next-Generation Data Integration on Oracle Exadata’ session we will be discussing how Oracle with its innovative Data Integration solution along with Exadata can help companies tackle that challenge. Oracle Data Integrator and Oracle GoldenGate provide industry-leading performance and scalability for data integration on Oracle Exadata. They are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components which can often be bottlenecks for data movement and transformation. Combined with the extreme performance provided by Exadata our Data Integration products help companies move towards a more efficient and flexible data integration infrastructure. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you’re interested in hearing more about how our customers maximize the performance of their Exadata systems while minimizing batch windows, all without adding more hardware resources join us for the following session: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Next-Generation Data Integration on Oracle Exadata  Thursday October, 4th - 11:15AM - 12:15PM Moscone West – Room 3005 We also have many other exciting sessions including 'Oracle Data Integrator Product Update and Future Strategy' on October 2nd at 1:15PM in Moscone West Room 3005. In this session we will discuss the ODI roadmap and its integration with engineered systems such as the Oracle Big Data Appliance. It's a session not to be missed! You can find a list of all the Data Integration sessions happening at Oracle OpenWorld in this document: Focus On Data Integration. If you will not be able to come to OpenWorld, for more information please check out our data sheet Oracle Data Integration Solutions and the Oracle Exadata Database Machine. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >