Search Results

Search found 16331 results on 654 pages for 'option'.

Page 308/654 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

  • OpenVPN DNS: VPN DNS stomping local VPN

    - by Eddie Parker
    I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I have the directive: push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

    Read the article

  • PPTP server stuck at "GRE: Bad checksum from pppd"

    - by user92516
    I am a network engineer having quite limited experience with Ubuntu. I have been following up these online instructions to set up a pptp server but without much luck to get it to work. My server is a vm running an Apple Xserve behind a Cisco firewall. I made sure tcp 1723 and GRE are opened for the box. Below is the syslog output, looks like I always got stuck at GRE: Bad checksum from pppd. I'm running Ubuntu 10.04. Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Reaping child PPP[1232] Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Client 166.137.85.165 control connection finished Sep 24 13:22:41 ubuntu pptpd[1276]: MGR: connections limit (100) reached, extra IP addresses ignored Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Manager process started Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Maximum of 100 connections available Sep 24 13:22:50 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection started Sep 24 13:22:51 ubuntu pptpd[1278]: CTRL: Starting call (launching pppd, opening GRE) Sep 24 13:22:51 ubuntu pppd[1279]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Sep 24 13:22:51 ubuntu pppd[1279]: pppd 2.4.5 started by root, uid 0 Sep 24 13:22:51 ubuntu pppd[1279]: Using interface ppp0 Sep 24 13:22:51 ubuntu pppd[1279]: Connect: ppp0 <--> /dev/pts/1 Sep 24 13:22:51 ubuntu pptpd[1278]: GRE: Bad checksum from pppd. Sep 24 13:23:21 ubuntu pppd[1279]: LCP: timeout sending Config-Requests Sep 24 13:23:21 ubuntu pppd[1279]: Connection terminated. Sep 24 13:23:21 ubuntu pppd[1279]: Modem hangup Sep 24 13:23:21 ubuntu pppd[1279]: Exit. Sep 24 13:23:21 ubuntu pptpd[1278]: GRE: read(fd=6,buffer=805a540,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Reaping child PPP[1279] Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection finished

    Read the article

  • Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

    - by smisner
    Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system.The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me.At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach.Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements.My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work.Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way.DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal.Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info:You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client.You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features.I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically.When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions:On the Choose the installation you want page of the installation wizard, I chose Server Farm.On the Server Type page, I chose Complete.At the end of the installation, I did not run the configuration wizard.Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end.It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective.I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed:Install SQL Server 2008 R2 to get a database engine instance installed.Run the SharePoint configuration wizard to set up the SharePoint databases.In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization.Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment.I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon.Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment.I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • sshfs with fstab: connection reset by peer

    - by user171348
    I am trying to allow my laptop (Ubuntu 13.04) to access my PC (Lubuntu 13.04) hard drive through SSHFS. I'm using RSA keys to connect. It works perfectly fine if I type this in the terminal: sshfs my-PC:/a_folder /media/a_folder But I would like it to be mounted automatically when I boot my laptop. So I added myself to the fuse group: sudo adduser mynickname fuse And I added the following line to my fstab file: sshfs#mynickname@my-PC:/a_folder /media/a_folder fuse defaults,idmap=user,_netdev 0 0 When I boot the laptop, a_folder appears in the list of devices, but is not mounted. When I try to access it through Nautilus, it displays the following error: mount: only root can mount sshfs#mynickname@my-PC:/a_folder on /media/a_folder I get the same error if I try mount /media/a_folder in a terminal. If I try sudo mount /media/a_folder I get read: Connection reset by peer I tried to add "allow_other" as an option in the fstab entry, and uncommented the related line in /etc/fuse.conf, but it didn't change anything. The user "mynickname" is the owner of the folder /media/a_folder and has rwx permissions. I looked at many threads on the internet about people with quite similar issues, but nothing worked so far. Usually, people can't even do sshfs my-PC:/a_folder /media/a_folder without getting an error, whereas this works fine on my laptop. Any insight and tips will be greatly appreciated! Thanks.

    Read the article

  • How to install and use Tally ERP 9 in Wine

    - by askmish
    I am trying to run Tally ERP 9 (http://www.tallysolutions.com/), post-installation in wine 1.7. I am getting an "out of memory" error, the moment it starts(at the tally splash screen). I then have no option other than to close it. OS: Xubuntu 12.04.3 Wine: 1.6\1.7.9 How have I installed: Inserted the Tally Installation CD, clicked on the tally installer executable. Installed by following the setup. Configured for multi-user, client configuration. Server is at a specified LAN address running on Windows. Then once installation is done. Clicked on the executable/ran from command line for tally.exe Please guide.

    Read the article

  • Can't boot up computer windows 8 installation

    - by danny ramirez
    I wanted to install Windows 8 with a volume partition and when the Windows 8 was installing it rebooted and it gave me an error: The digital signature for this file couldn't be verified. File :windows \system 32\winload.exe error code 0xc0000428. I have tried bootec commands and they didn't seem to fix it. Also my Windows 7 got deleted and I only have to boot with the Windows 8 error, so I can't do anything not even boot to safe mode. I have tried to install Windows 8 from disk later on and it won't let me because it keeps rebooting and starting the installation again, so I took off the disk before it rebooted and it takes me to that error again. Remember that's my only boot option so I'm stuck in the installation disk.

    Read the article

  • How To Restore Firefox Options To Default Without Uninstalling

    - by Gopinath
    Firefox plugins are awesome and they are the pillars for the huge success of Firefox browser. Plugins vary from simple ones like changing color scheme of the browser to powerful ones likes changing the behavior of the browser itself. Recently I installed one of the powerful Firefox plugins and played around to tweak the behavior of the browser. At the end of my half an hour play, Firefox has completely become useless and stopped rending web pages properly. To continue using Firefox I had to restore it to default settings. But I don’t like to uninstall and then install it again as it’s a time consuming process and also I’ll loose all the plugins I’m using. How did I restore the default settings in a single click? Default Settings Restore Through Safe Mode Options It’s very easy to restore default settings of Firefox with the safe mode options. All we need to do is 1.  Close all the Firefox browser windows that are open 2. Launch Firefox in safe mode 3. Choose the option Reset all user preferences to Firefox defaults 4. Click on Make Changes and Restart button. Note: When Firefox restore the default settings, it erases all the stored passwords, browser history and other settings you have done. That’s all. This excellent feature of Firefox saved me from great pain and hope it’s going to help you too. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • How To Restore Firefox Options To Default Without Uninstalling

    - by Gopinath
    Firefox plugins are awesome and they are the pillars for the huge success of Firefox browser. Plugins vary from simple ones like changing color scheme of the browser to powerful ones likes changing the behavior of the browser itself. Recently I installed one of the powerful Firefox plugins and played around to tweak the behavior of the browser. At the end of my half an hour play, Firefox has completely become useless and stopped rending web pages properly. To continue using Firefox I had to restore it to default settings. But I don’t like to uninstall and then install it again as it’s a time consuming process and also I’ll loose all the plugins I’m using. How did I restore the default settings in a single click? Default Settings Restore Through Safe Mode Options It’s very easy to restore default settings of Firefox with the safe mode options. All we need to do is 1.  Close all the Firefox browser windows that are open 2. Launch Firefox in safe mode 3. Choose the option Reset all user preferences to Firefox defaults 4. Click on Make Changes and Restart button. Note: When Firefox restore the default settings, it erases all the stored passwords, browser history and other settings you have done. That’s all. This excellent feature of Firefox saved me from great pain and hope it’s going to help you too. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Complete Guide to Symbolic Links (symlinks) on Windows or Linux

    - by Matthew Guay
    Want to easily access folders and files from different folders without maintaining duplicate copies?  Here’s how you can use Symbolic Links to link anything in Windows 7, Vista, XP, and Ubuntu. So What Are Symbolic Links Anyway? Symbolic links, otherwise known as symlinks, are basically advanced shortcuts. You can create symbolic links to individual files or folders, and then these will appear like they are stored in the folder with the symbolic link even though the symbolic link only points to their real location. There are two types of symbolic links: hard and soft. Soft symbolic links work essentially the same as a standard shortcut.  When you open a soft link, you will be redirected to the folder where the files are stored.  However, a hard link makes it appear as though the file or folder actually exists at the location of the symbolic link, and your applications won’t know any different. Thus, hard links are of the most interest in this article. Why should I use Symbolic Links? There are many things we use symbolic links for, so here’s some of the top uses we can think of: Sync any folder with Dropbox – say, sync your Pidgin Profile Across Computers Move the settings folder for any program from its original location Store your Music/Pictures/Videos on a second hard drive, but make them show up in your standard Music/Pictures/Videos folders so they’ll be detected my your media programs (Windows 7 Libraries can also be good for this) Keep important files accessible from multiple locations And more! If you want to move files to a different drive or folder and then symbolically link them, follow these steps: Close any programs that may be accessing that file or folder Move the file or folder to the new desired location Follow the correct instructions below for your operating system to create the symbolic link. Caution: Make sure to never create a symbolic link inside of a symbolic link. For instance, don’t create a symbolic link to a file that’s contained in a symbolic linked folder. This can create a loop, which can cause millions of problems you don’t want to deal with. Seriously. Create Symlinks in Any Edition of Windows in Explorer Creating symlinks is usually difficult, but thanks to the free Link Shell Extension, you can create symbolic links in all modern version of Windows pain-free.  You need to download both Visual Studio 2005 redistributable, which contains the necessary prerequisites, and Link Shell Extension itself (links below).  Download the correct version (32 bit or 64 bit) for your computer. Run and install the Visual Studio 2005 Redistributable installer first. Then install the Link Shell Extension on your computer. Your taskbar will temporally disappear during the install, but will quickly come back. Now you’re ready to start creating symbolic links.  Browse to the folder or file you want to create a symbolic link from.  Right-click the folder or file and select Pick Link Source. To create your symlink, right-click in the folder you wish to save the symbolic link, select “Drop as…”, and then choose the type of link you want.  You can choose from several different options here; we chose the Hardlink Clone.  This will create a hard link to the file or folder we selected.  The Symbolic link option creates a soft link, while the smart copy will fully copy a folder containing symbolic links without breaking them.  These options can be useful as well.   Here’s our hard-linked folder on our desktop.  Notice that the folder looks like its contents are stored in Desktop\Downloads, when they are actually stored in C:\Users\Matthew\Desktop\Downloads.  Also, when links are created with the Link Shell Extension, they have a red arrow on them so you can still differentiate them. And, this works the same way in XP as well. Symlinks via Command Prompt Or, for geeks who prefer working via command line, here’s how you can create symlinks in Command Prompt in Windows 7/Vista and XP. In Windows 7/Vista In Windows Vista and 7, we’ll use the mklink command to create symbolic links.  To use it, we have to open an administrator Command Prompt.  Enter “command” in your start menu search, right-click on Command Prompt, and select “Run as administrator”. To create a symbolic link, we need to enter the following in command prompt: mklink /prefix link_path file/folder_path First, choose the correct prefix.  Mklink can create several types of links, including the following: /D – creates a soft symbolic link, which is similar to a standard folder or file shortcut in Windows.  This is the default option, and mklink will use it if you do not enter a prefix. /H – creates a hard link to a file /J – creates a hard link to a directory or folder So, once you’ve chosen the correct prefix, you need to enter the path you want for the symbolic link, and the path to the original file or folder.  For example, if I wanted a folder in my Dropbox folder to appear like it was also stored in my desktop, I would enter the following: mklink /J C:\Users\Matthew\Desktop\Dropbox C:\Users\Matthew\Documents\Dropbox Note that the first path was to the symbolic folder I wanted to create, while the second path was to the real folder. Here, in this command prompt screenshot, you can see that I created a symbolic link of my Music folder to my desktop.   And here’s how it looks in Explorer.  Note that all of my music is “really” stored in C:\Users\Matthew\Music, but here it looks like it is stored in C:\Users\Matthew\Desktop\Music. If your path has any spaces in it, you need to place quotes around it.  Note also that the link can have a different name than the file it links to.  For example, here I’m going to create a symbolic link to a document on my desktop: mklink /H “C:\Users\Matthew\Desktop\ebook.pdf”  “C:\Users\Matthew\Downloads\Before You Call Tech Support.pdf” Don’t forget the syntax: mklink /prefix link_path Target_file/folder_path In Windows XP Windows XP doesn’t include built-in command prompt support for symbolic links, but we can use the free Junction tool instead.  Download Junction (link below), and unzip the folder.  Now open Command Prompt (click Start, select All Programs, then Accessories, and select Command Prompt), and enter cd followed by the path of the folder where you saved Junction. Junction only creates hard symbolic links, since you can use shortcuts for soft ones.  To create a hard symlink, we need to enter the following in command prompt: junction –s link_path file/folder_path As with mklink in Windows 7 or Vista, if your file/folder path has spaces in it make sure to put quotes around your paths.  Also, as usual, your symlink can have a different name that the file/folder it points to. Here, we’re going to create a symbolic link to our My Music folder on the desktop.  We entered: junction -s “C:\Documents and Settings\Administrator\Desktop\Music” “C:\Documents and Settings\Administrator\My Documents\My Music” And here’s the contents of our symlink.  Note that the path looks like these files are stored in a Music folder directly on the Desktop, when they are actually stored in My Documents\My Music.  Once again, this works with both folders and individual files. Please Note: Junction would work the same in Windows 7 or Vista, but since they include a built-in symbolic link tool we found it better to use it on those versions of Windows. Symlinks in Ubuntu Unix-based operating systems have supported symbolic links since their inception, so it is straightforward to create symbolic links in Linux distros such as Ubuntu.  There’s no graphical way to create them like the Link Shell Extension for Windows, so we’ll just do it in Terminal. Open terminal (open the Applications menu, select Accessories, and then click Terminal), and enter the following: ln –s file/folder_path link_path Note that this is opposite of the Windows commands; you put the source for the link first, and then the path second. For example, let’s create a symbolic link of our Pictures folder in our Desktop.  To do this, we entered: ln -s /home/maguay/Pictures /home/maguay/Desktop   Once again, here is the contents of our symlink folder.  The pictures look as if they’re stored directly in a Pictures folder on the Desktop, but they are actually stored in maguay\Pictures. Delete Symlinks Removing symbolic links is very simple – just delete the link!  Most of the command line utilities offer a way to delete a symbolic link via command prompt, but you don’t need to go to the trouble.   Conclusion Symbolic links can be very handy, and we use them constantly to help us stay organized and keep our hard drives from overflowing.  Let us know how you use symbolic links on your computers! Download Link Shell Extension for Windows 7, Vista, and XP Download Junction for XP Similar Articles Productive Geek Tips Using Symlinks in Windows VistaHow To Figure Out Your PC’s Host Name From the Command PromptInstall IceWM on Ubuntu LinuxAdd Color Coding to Windows 7 Media Center Program GuideSync Your Pidgin Profile Across Multiple PCs with Dropbox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • WDS "No response" only when notify and wait for approval

    - by Cylindric
    I have a WDS server setup for use with MDT2010, and everything was working fine until this morning. Now, whenever I try to boot from LAN, I get an error: Downloaded WDSNBP... Architecture: x64 WDSNBP started using DHCP Referral. Contacting Server: 10.50.10.12 (Gateway: 0.0.0.0) No response from Windows Deployment Services server. Launching pxeboot.com My PXE Response Policy setting on the WDS is set to this: [ ] Do not respond to any client computer [ ] Respond only to known client computers [o] Respond to all (known and unknown) client computers [X] For unknown clients, notify administrator and respond after approval The odd thing is that if I clear the approval option (so any computer gets a response) it works fine. I have delegated permissions on the AD OU to the computer object WDS is running on, but that doesn't seem to have helped. As it works without approval, I can only assume my DHCP options are fine and this is some sort of AD permission problem. (Server is Windows Server 2008 SP2)

    Read the article

  • Windows 2008 R2 DHCP server not responding to DHCP discover

    - by MartinSteel
    I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

  • Visual Studio 2013 Static Code Analysis in depth: What? When and How?

    - by Hosam Kamel
    In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

    Read the article

  • Windows Server 2003 - Handling hundreds of simultaneous downloads

    - by Paul Hinett
    At the moment I have a single server with 4 1TB hard disks, daily I haver over 150 MP3 music files uploaded (around 80mb each). At busy periods there is over 300 people streaming / downloading these mixes all at once, 75% of the activity is on the most recently uploaded stuff which is all on a single hard disk. My read speads on the hard disk are very low due to such high activity of 200+ reads all happening at the same time on a single hard disk (ran some tests with HDTach). What would be a logical solution to solve this, a couple of ideas I had are: Load balance with another server Install faster hard disks (what are best these days? SCSI / SATA) Spread the most accessed files over the 4 drives so it is sharing the load between all 4 disks, instead of all the most accessed (most recent) all on the most recently installed drive. Obviouslly load balance is the most expensive option, but would it dramatically help? Some help on this situation would be great!

    Read the article

  • Install Git under OSX Mavericks

    - by Jan Hancic
    I've just completed a fresh install of Mavericks. Then I went to git-scm.com and downloaded the Mac installer and installed Git from that. Now whenever I go into the terminal and type git I get this: xcode-select: note: no developer tools were found at '/Applications/Xcode.app', requesting install. Choose an option in the dialog to download the command line developer tools. I also this dialog: The git installer installed git into /usr/local/git/bin and I've added this to my PATH but still no dice. What am I doing wrong here? I don't want to install xcode just so I can use git.

    Read the article

  • Disable reverse PTR check in Zimbra and force accept from invalid domains

    - by ewwhite
    I've moved an older Sendmail/Dovecot system to a Zimbra community edition system. I need to be able to receive messages from certain standalone Linux hosts that may not have valid A records or proper reverse DNS entries established (e.g. AT&T is the ISP or systems sitting on a consumer-level ISP). Establishing the reverse DNS or setting a SMARTHOST is not an option. The error I get in zimbra.log is: zimbra postfix/smtp[2200]: DB83B231B53: to=<root@host_name.baddomain.com>, relay=none, delay=0.07, delays=0.06/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=host_name.baddomain.com type=A: Host not found How can I override this? Is this more of a Postfix issue or is it Zimbra? edit - The problem seems to be with an underscore in the hostname of the server. So it's a problem with root@host_name.baddomain.com. Again, how can I override this in Zimbra?

    Read the article

  • Can the Dell PowerEdge T320 boot from a USB stick in hard drive emulation mode?

    - by Icydog
    I am trying to install FreeNAS on a Dell PowerEdge T320. I've followed the instructions here (http://doc.freenas.org/index.php/Burning_an_IMG_File) to write the .img file to four different USB sticks with dd if=FreeNAS-9.2.1.5-RELEASE-x64.img of=/dev/sde, but I can't boot off of any of them. When I try to boot, I get the following screen: F1 FreeBSD F2 FreeBSD F3 Drive 0 Then it auto-selects F1 and either prints # about once a second forever, or it sits with a blinking cursor doing nothing. Forum posts and the wiki page linked above say to set the USB boot emulation mode to hard disk (as opposed to auto or CD/DVD/floppy), and older Dell PowerEdge models including the T310 have this option in the BIOS settings, but I cannot find it on the T320 with the latest BIOS 2.1.2. I have even tried writing the USB image to a USB hard disk, but with the same lack of success. Has anyone been able to find this USB boot setting on a T320, or been able to boot FreeNAS/FreeBSD from USB in some other way on a T320?

    Read the article

  • CodePlex Daily Summary for Tuesday, March 09, 2010

    CodePlex Daily Summary for Tuesday, March 09, 2010New Projects.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: .NET Excel Wrapper encapsulates the complexity of working with multiple Excel objects giving you one central point to do all your processing. It h...Advancement Voyage: Advancement Voyage is a high quality RPG experience that provides all the advancement and voyaging that a player could hope for.ASP.Net Routing configuration: ASP.NET routing configuration enables you to configure the routes in the web.config bbinjest: bbinjestBuildUp: BuildUp is a build number increment tool for C# .net projects. It is run as a post build step in Visual Studio.Controlled Vocabulary: This project is devoted to creating tools to assist with Controlling Vocabulary in communication. The initial delivery is an Outlook 2010 Add-in w...CycleList: A replacement for the WPF ListBox Control. Displays only a single item and allows the user to change the selected item by clicking on it once. Very...Forensic Suite: A suite of security softwareFREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat is a live chat solution and its DotNetNuke Chat Module helps to embed a live chat room into website with DotNetNuke(DNN) integrated ...HouseFly experimental controls: Experimental controls for use in HouseFly.ICatalogAll: junkMidiStylus: MidiStylus allows you to control MIDI-enabled hardware or software using your pressure-sensitive pen tablet. The program maps the X position, Y po...myTunes: Search for your favorite artistsNColony - Pluggable Socialism?: NColony will maximize the use of MEF to create flexible application architectures through a suite of plug-in solutions. If MEF is an outlet for plu...Network Monitor Decryption Expert: NmDecrypt is a Network Monitor Expert which when given a trace with encrypted frames, a security certificate, and a passkey will create a new trace...occulo: occulo is a free steganography program, meant to embed files within images with optional encrytion. Open Ant: A implementation of a Open Source Ant which is created to show what is possible in the serious game AntMe! The First implementation of that ProjectProgramming Patterns by example: Design patterns provide solutions to common software design problems. This project will contain samples, written in c# and ruby, of each design pat...project4k: Developing bulk mail system storing email informationQuail - Selenium Remote Control Made Easy: Quail makes it easy for Quality Assurance departments write automated tests against web applications. Both HTML and Silverlight applications can b...RedBulb for XNA Framework: RedBulb is a collection of utility functions and classes that make writing games with XNA a lot easier. Key features: Console,GUI (Labels, Buttons,...RegExpress: RegExpress is a WPF application that combines interactive demos of regular expressions with slide content. This was designed for a user group prese...RemoveFolder: Small utility program to remove empty foldersScrumTFS: ScrumTFSSharePoint - Open internal link in new window list definition: A simple SharePoint list definition to render SharePoint internal links with the option to open them in a new window.SqlSiteMap4MVC: SqlSiteMapProvider for ASP.Net MVC.T Sina .NET Client: t.sina.com.cn api 新浪微博APITest-Lint-Extensions: Test Lint is a free Typemock VS 2010 Extension that finds common problems in your unit tests as you type them. this project will host extensions ...ThinkGearNET: ThinkGearNET is a library for easy usage of the Neurosky Mindset headset from .NET .Wiki to Maml: This project enables you to write wiki syntax and have it converted into MAML syntax for Sandcastle documentation projects.WPF Undo/Redo Framework: This project attempts to solve the age-old programmer problem of supporting unlimited undo/redo in an application, in an easily reusable manner. Th...WPFValidators: WPF Validators Validações de campos para WPFWSP Listener: The WSP listener is a windows service application which waits for new WSC and WSP files in a specific folder. If a new WSC and WSP file are added, ...New Releases.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: First Release: This is the first release which includes the main library release..NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: Updated Version: New Features:SetRangeValue using multidimensional array Print current worksheet Print all worksheets Format ranges background, color, alig...ArkSwitch: ArkSwitch v1.1.2: This release removes all memory reporting information, and is focused on stability.BattLineSvc: V2.1: - Fixed a bug where on system start-up, it would pop up a notification box to let you know the service started. Annoying! And fixed! - Fixed the ...BuildUp: BuildUp 1.0 Alpha 1: Use at your own risk!Not yet feature complete. Basic build incrementing and attribute overriding works. Still working on cascading build incremen...Controlled Vocabulary: 1.0.0.1: Initial Alpha Release. System Requirements Outlook 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running i...CycleList: CycleList: The binaries contain the .NET 3.5 DLL ONLY. Please download source for usage examples.FluentNHibernate.Search: 0.3 Beta: 0.3 Beta take the following changes : Mappings : - Field Mapping without specifying "Name" - Id Mapping without specifiying "Field" - Builtin Anal...FREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat DNN Chat Module: With FREE DotNetNuke Chat Module of 123 Flash Chat, webmaster will be assist to add a chat room into DotNetNuke instantly and help to attract more ...GameStore League Manager: League Manager 1.0 release 3: This release includes a full installer so that you can get your league running faster and generate interest quicker.iExporter - iTunes playlist exporting: iExporter gui v2.3.1.0 - console v1.2.1.0: Paypal donate! Solved a big bug for iExporter ( Gui & Console ) When a track isn't located under the main iTunes library, iExporter would crash! ...jQuery.cssLess: jQuery.cssLess 0.3: New - Removed the dependency from XRegExp - Added comment support (both CSS style and C style) - Optimised it for speed - Added speed test TOD...jQuery.cssLess: jQuery.cssLess 0.4: NEW - @import directive - preserving of comments in the resulting CSS - code refactoring - more class oriented approach TODO - implement operation...MapWindow GIS: MapWindow 6.0 msi (March 8): Rewrote the shapefile saving code in the indexed case so that it uses the shape indices rather than trying to create features. This should allow s...MidiStylus: MidiStylus 0.5.1: MidiStylus Beta 0.5.1 This release contains basic functionality for transmitting MIDI data based on X position, Y position, and pressure value rea...MiniTwitter: 1.09.1: MiniTwitter 1.09.1 更新内容 修正 URL に & が含まれている時に短縮 URL がおかしくなるバグを修正Mosaictor: first executable: .exe file of the app in its current state. Mind you that this will likely be highly unstable due to heaps of uncaught errors.MvcContrib a Codeplex Foundation project: T4MVC: T4MVC is a T4 template that generates strongly typed helpers for ASP.NET MVC. You can download it below, and check out the documention here.N2 CMS: 2.0 beta: Major Changes ASP.NET MVC 2 templates Refreshed management UI LINQ support Performance improvements Auto image resize Upgrade Make a comp...NotesForGallery: ASP.NET AJAX Photo Gallery Control: NotesForGallery 2.0: PresentationNotesForGallery is an open source control on top of the Microsoft ASP.NET AJAX framework for easy displaying image galleries in the as...occulo: occulo 0.1 binaries: Windows binaries. Tested on Windows XP SP2.occulo: occulo 0.1 source: Initial source release.Open NFe: DANFE 1.9.5: Ajuste de layout e correção dos campos de ISS.patterns & practices Web Client Developer Guidance: Web Application Guidance -- March 8th Drop: This iteration we focused on documentation and bug fixes.PoshConsole: PoshConsole 2.0 Beta: With this release, I am refocusing PoshConsole... It will be a PowerShell 2 host, without support for PowerShell 1.0 I have used some of the new P...Quick Performance Monitor: QPerfmon 1.1: Now you can specify different updating frequencies.RedBulb for XNA Framework: Cipher Puzzle (Sample) Creators Club Package: RedBulb Sample Game: Cipher Puzzle http://bayimg.com/image/galgfaacb.jpgRedBulb for XNA Framework: RedBulbStarter (Base Code): This is the code you need to start with. Quick Start Guide: Download the latest version of RedBulb: http://redbulb.codeplex.com/releases/view/415...RoTwee: RoTwee 7.0.0.0 (Alpha): Now this version is under improvement of code structure and may be buggy. However movement of rotation is quite good in this version thanks to clea...SCSI Interface for Multimedia and Block Devices: Release 9 - Improvements and Bug Fixes: Changes I have made in this version: Fixed INQUIRY command timeout problem Lowered ISOBurn's memory usage significantly by not explicitly setting...SharePoint - Open internal link in new window list definition: Open link in new window list definition: First release, with english and italian localization supportSharePoint Outlook Connector: Version 1.2.3.2: Few bug fixing and some ui enhancementsSysI: sysi, release build: Better than ever -- now allows for escalation to adminThe Silverlight Hyper Video Player [http://slhvp.com]: Beta 1: Beta (1.1) The code is ready for intensive testing. I will update the code at least every second day until we are ready to freeze for V1, which wi...Truecrafting: Truecrafting 0.52: fixed several trinkets that broke just before i released 0.51, sorry fixed water elemental not doing anything while summoned if not using glyph o...Truecrafting: Truecrafting 0.53: fixed mp5 calculations when gear contained mp5 and made the formulas more efficient no need to rebuild profiles with this release if placed in th...umbracoSamplePackageCreator (beta): Working Beta: For Visual Studio 2008 creating packages for Umbraco 4.0.3.VCC: Latest build, v2.1.30307.0: Automatic drop of latest buildVCC: Latest build, v2.1.30308.0: Automatic drop of latest buildVOB2MKV: vob2mkv-1.0.3: This is a maintenance update of the VOB2MKV utility. The MKVMUX filter now describes the cluster locations using a separate SeekHead element at th...WPFValidators: WPFValidators 1.0 Beta: Primeira versão do componente ainda em Beta, pode ser utilizada em produção pois esta funcionando bem e as futuras alterações não sofreram muito im...WSDLGenerator: WSDLGenerator 0.0.06: - Added option to generate SharePoint compatible *disco.aspx file. - Changed commandline optionsWSP Listener: WSP Listener version 1.0.0.0: First version of the WSP Listener includes: Easy cop[y paste installation of WSP solutions Extended logging E-mail when installation is finish...Yet another pali text reader: Pali Text Reader App v1.1: new features/updates + search history is now a tab + format codes in dictionary + add/edit terms in the dictionary + pali keyboard inserts symbols...Most Popular ProjectsMetaSharpi4o - Indexed LINQResExBraintree Client LibraryGeek's LibrarySharepoint Feature ManagerConfiguration ManagementOragon Architecture SqlBuilderTerrain Independant Navigating Automaton v2.0WBFS ManagerMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web ServicesFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryTeam FTW - Software ProjectIonics Isapi Rewrite Filter

    Read the article

  • Started a Forum Board (with phpBB), but Now Rethinking Choice of Board App - Security

    - by nicorellius
    The main reason I even started participating on Superuser.com is because a friend ripped me a new one for using phpBB. He said, "check out StackExchange, they have their act together!" I did, and it's true. So now, after learning phpBB and implementing the board (it's still new and in its infancy), I feel slightly regretful. I would love to use the Stack Exchange tool, but the cost will eventually be the main deterrent. The attractive thing about phpBB is that it's free and open. However, I have heard that it lacks security. Has anyone had this experience, that phpBB is not secure, such that they changed board software? And, I wonder if Stack Exchange is going to introduce a cheaper option for low traffic users? Does this question belong on meta?

    Read the article

  • Can I use `UnlockCommercialFeatures` for developing Java applications without a commercial license?

    - by nondescript1
    As of Java 7 Update 40, Oracle is now including Java Mission Control in the JDK. Being always interested in a new profiling tool, I decided to check it out. However, trying to start Flight Recorder against a process, I get the following error, Now I'm getting cold feet about adding the JVM option -XX:+UnlockCommercialFeatures. I would only use this for profiling in development and not in production. From the article linked above, JMC is available under the Oracle Binary Code License for Java. The license allows you to use JMC for free during development and testing, though a different (paid for) licence is required for production use. I'm still leery about this. From Java SE Products, Flight Recorder certainly is a commercial feature; however, I find it very confusing that it's now included in the standard JDK release. Anyone else have a read on this? Clearly nothing here is legally binding and your legal department should be consulted. Reference: Oracle Binary Code License Agreement for the Java SE Platform Products and JavaFX

    Read the article

  • Linux Server Performance Monitoring

    - by Jon
    I'm looking to monitor performance on my Linux servers (which happen to be Centos). What are the best tools for monitoring things in realtime such as: Disk Performance I/O, swapping etc.. CPU Performance Looking for low level tools, rather than web based tools such as Nagios, Ganglia etc... n.b. I'd like to know exactly what each tool does rather than just having a list of random toolnames if possible please. Why the tool is a better option than others would be good also.

    Read the article

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • December release of Microsoft All-In-One Code Framework is available now.

    - by Jialiang
    The code samples in Microsoft All-In-One Code Framework are updated on 2010-12-13. Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If it’s the first time that you hear about Microsoft All-In-One Code Framework, please watch the introduction video on YouTube http://www.youtube.com/watch?v=cO5Li3APU58, or read the introduction on our homepage http://1code.codeplex.com/,  and this Port25 article http://port25.technet.com/archive/2010/01/18/the-all-in-one-code-framework.aspx.  -------------- New ASP.NET Code Samples VBASPNETAJAXWebChat and CSASPNETAJAXWebChat Most of you have some experience in chatting with friends on the web. So you may want to know how to make a web chat application, it seems to be quite complicated. But ASP.NET gives you the power to buiild a chat room easily. In this code sample, we will construct our own web chat room with the amazing AJAX feature. The principle is simple relatively. As we all know, a base chat application need 4 base controls: one List control to show the chat room members, one List control to show the message list, one TextBox control to input messages and one button to send message. User inputs his message in the textbox first and then presses Send button, it will send the message to the server. The message list will update every 2 seconds to get the newest message list in the chat room from the server. We need to know, it is hard for us to make an AJAX web chat application like a windows form application because we cannot keep the connection after one web request ended. So a lot of events which communicates between client side and server side cannot be realized. The common workaround is to make web requests in every some seconds to check whether the server side has been updated. But another technique called COMET makes it possible. But it is different with AJAX and will not be talked in details in this KB. For more details about COMET, we can get some clues from the Reference.   CSASPNETCurrentOnlineUserList and VBASPNETCurrentOnlineUserList This sample demos a system that needs to display a list of current online users' information. As a matter of fact, Membership.GetNumberOfUsersOnline Method  can get the number of online users and there is a convenient approach to check whether the user is online by using Membership.GetUser(string userName).IsOnline property,however many asp.net projects are not using membership.So in this case,the sample shows how to display a list of current online users' information without using membership provider. It is not difficult to check whether the user is online by using session.Many projects tend to be used “Session_End” event to mark a user as “Offline”,however ,it may not be a good idea,because it can’t detect the user status accurately. In addition, "Session_End" event is only available in the "InProc" session mode. If you are storing session states in the State Server or SQL Server, "Session_End" event will never fire. To handle this issue, we need to save the user online status to a  global DataTable or  DataBase. In the sample application, define a global DataTable to store the information of online users.Use XmlHttpRequest in the pages to update and check user's last active time at intervals and also retrieve information on how many users are still online. The sample project can auto delete offline users' information from a global DataTable by checking users’ last active time. A step-by-step guide illustrating how to display a list of current online users' information without using membership provider: 1. Login page. Let user sign in and add current user’s information to a global datatable while Initialize the global datatable which used to store information of current online users. 2. Current online user list page. Use XmlHttpRequest in this page to update and check user's last active time at intervals and also retrieve information on how many users are still online. 3. If user closes the page without clicking  the sign out link button ,the sample project can auto mark the user as offline and delete offline users' information from a global DataTable which used to store information of current online users  by checking users’ last active time. Then the current online user list will be like this:   CSASPNETIPtoLocation This sample demonstrates how to find the geographical location from an IP address. As we know, it is not hard for us to get the IP address of visitors via Request.ServerVariable property, but it is really difficult for us to know where they come from. To achieve this feature, the sample uses a free third party web service from http://freegeoip.appspot.com/, which returns the information about an IP address we send to the server in the format of XML, JSON or CSV. It makes all things easier.   CSASPNETBackgroundWorker Sometimes we do an operation which needs long time to complete. It will stop the response and the page is blank until the operation finished. In this case, we want the operation to run in the background, and in the page, we want to display the progress of the running operation. Therefore, the user can know the operation is running and can know the progress. CSASPNETInheritingFromTreeNode In windows forms TreeView, each tree node has a property called "Tag" which can be used to store a custom object. Many customers want to implement the same tag feature in ASP.NET TreeView. This project creates a custom TreeView control named "CustomTreeView" to achieve this goal. CSASPNETRemoteUploadAndDownload and VBASPNETRemoteUploadAndDownload This code sample was created in response to a code sample request in our new code sample request frunction for customers. The code samples demonstrate uploading files to and downloading files from a remote HTTP or FTP server. In .NET Framework 2.0 and higher versions, there are some lightweight class libraries which support HTTP and FTP protocol transmission. By using these classes, we can achieve this programming requirement.   CSASPNETImageEditUpload and VBASPNETImageEditUpload This demo will shows how to insert, edit and update a common image with the type of "jpg", "png", "gif" or "bmp" . We mainly use two different SqlDataSources with the same database to bind to GridView and FormView in order to establish the “cascading” effort. Besides we apply our self-made ImageHanlder to encoding or decoding images of different types, and use context to output the stream of images. We will explicitly assign the binary streams of images through the event of “FormView_ItemInserting” or “Form_ItemUpdating” to synchronize the stream both in what we can see on an aspx page as well as in what’s really stored in the database.   WebBrowser Control, Network and other Windows General New Code Samples   CSWebBrowserSuppressError and VBWebBrowserSuppressError The sample demonstrates how to make WebBrowser suppress errors, such as script error, navigation error and so on.   CSWebBrowserWithProxy and VBWebBrowserWithProxy The sample demonstrates how to make WebBrowser use a proxy server.   CSWebDownloadProgress and VBWebDownloadProgress The sample demonstrates how to show progress during the download. It also supplies the features to Start, Pause, Resume and Cancel a download.   CppSetDesktopWallpaper, CSSetDesktopWallpaper and VBSetDesktopWallpaper This code sample application allows you select an image, view a preview (resized smaller to fit if necessary), select a display style among Tile, Center, Stretch, Fit (Windows 7 and later) and Fill (Windows 7 and later), and set the image as the Desktop wallpaper. CSWindowsServiceRecoveryProperty and VBWindowsServiceRecoveryProperty CSWindowsServiceRecoveryProperty example demonstrates how to use ChangeServiceConfig2 to configure the service "Recovery" properties in C#. This example operates all the options you can see on the service "Recovery" tab, including setting the "Enable actions for stops with errors" option in Windows Vista and later operating systems. This example also include how to grant the shut down privilege to the process, so that we can configure a special option in the "Recovery" tab - "Restart Computer Options...".   New Office Development Code Samples   CSOneNoteRibbonAddIn and VBOneNoteRibbonAddIn The code sample demonstrates a OneNote 2010 COM add-in that implements IDTExtensibility2. The add-in also supports customizing the Ribbon by implementing the IRibbonExtensibility interface. It is a skeleton OneNote add-in that developers can extend it to implement more functions. The code sample was requested by a customer in our code sample request service. We expect that this could help developers in the community.   New Windows Shell Code Samples   CppShellExtPreviewHandler, CSShellExtPreviewHandler and VBShellExtPreviewHandler In the past two months, we released the code samples of Windows Context Menu Handler, Infotip Handler, and Thumbnail Handler. This is the fourth part of the shell extension series: Preview Handler. The code samples demo the C++, C# and VB.NET implementation of a preview handler for a new file type registered with the .recipe extension. Preview handlers are called when an item is selected to show a lightweight, rich, read-only preview of the file's contents in the view's reading pane. This is done without launching the file's associated application. Windows Vista and later operating systems support preview handlers. To be a valid preview handler, several interfaces must be implemented. This includes IPreviewHandler (shobjidl.h); IInitializeWithFile, IInitializeWithStream, or IInitializeWithItem (propsys.h); IObjectWithSite (ocidl.h); and IOleWindow (oleidl.h). There are also optional interfaces, such as IPreviewHandlerVisuals (shobjidl.h), that a preview handler can implement to provide extended support. Windows API Code Pack for Microsoft .NET Framework makes the implementation of these interfaces very easy in .NET. The example preview handler provides previews for .recipe files. The .recipe file type is simply an XML file registered as a unique file name extension. It includes the title of the recipe, its author, difficulty, preparation time, cook time, nutrition information, comments, an embedded preview image, and so on. The preview handler extracts the title, comments, and the embedded image, and display them in a preview window.   In response to many customers' request, we added setup projects in every shell extension samples in this release. Those setup projects allow you to deploy the shell extensions to your end users' machines. ---------- Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If you have any feedback for us, please email: [email protected]. We look forward to your comments.

    Read the article

  • CodePlex Daily Summary for Wednesday, October 02, 2013

    CodePlex Daily Summary for Wednesday, October 02, 2013Popular ReleasesEla, functional programming language: Ela, dynamic functional language (PDF, book, 0.6): A book about Ela, dynamic functional language in PDF format.Compact 2013 Tools: Managed Code Version of Apps 1.0: Compact13MinShell Download https://download-codeplex.sec.s-msft.com/Images/v20779/RuntimeBinary.gif Compact13MinShellV3.0.zip The Codeplex Project Downloads Page AboutCompact13Tools.zip: Each app as an OS Content Subproject. Includes CoreCon3 Subproject. Apps.zip: Just the apps in a a zip file AppInstallersx86.zip: The apps as separate x86 installers Compact13MinShell Download: (Separate Codeplex Project) The Minshell that implements the menu that includes these apps via registr...Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.C# Intellisense for Notepad++: Release v1.0.7.0: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.7.0: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.State of Decay Save Manager: Version 1.0.2: Added Start/Stop button for timer to manually enable/disable Quick save routine updated to force it to refresh the folder date Quick save added to backup listing Manual update button Lower level hooking for F5 and F9 buttons workingSharePoint Farm documentation tool: SPDocumentor 0.1: SPDocumentor 0.1 This is a POC version of the tool that will be implemented.DotNetNuke® Form and List: 06.00.06: DotNetNuke Form and List 06.00.06 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext Changes to 6.0.1•Scripts now compatible with SQL Azure. Changes to 6.0.0•Icons are shown in module action b...BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.2: Mostly internal code tweaks. added -nosize switch to turn off the size- and gzip-calculations done after minification. removed the comments in the build targets script for the old AjaxMin build task (discussion #458831). Fixed an issue with extended Unicode characters encoded inside a string literal with adjacent \uHHHH\uHHHH sequences. Fixed an IndexOutOfRange exception when encountering a CSS identifier that's a single underscore character (_). In previous builds, the net35 and net20...AJAX Control Toolkit: September 2013 Release: AJAX Control Toolkit Release Notes - September 2013 Release (Updated) Version 7.1001September 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Important UpdateThis release has been updated to fix two issues: Upda...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.4.apifix-alpha: WDTVHubGen.v2.1.4.apifix-alpha is for testers to figure out if we got the NEW api plugged in ok. thanksVisual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.9.29): Initial releaseAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download ends. word lis...Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????,???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...Magick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...New ProjectsAll CRM Resources for Microsoft Dynamics CRM: Microsoft Dynamics CRM Resources Windows 8 App with News, Feeds, Forums, Blogs, Videos & Twitter updates, information, guides & resources #MSDynCRM community.BasiliskBugTracker: A sample teamwork project for the Telerik Academy's ASP.NET Course 2013.CagerAutoPilot: Programmatically control a toy helicopter with kinectClass Libraries & Database Management: ClassDBManager permette la sincronizzazione delle classi (creazione/modifica/cancellazione) in base alle tabelle contenute nel databaseCommand Line Utility: Enables fast, easy creation of object-oriented settings classes in C# that interface directly with command line input. Minimize code and increase robustness.Controles | Versa: Login Pagina Principal Cadastro UsuáriosDispage: DisPage is a system to hide a website under a different browser title (For example "Vimeo" could look like "Google" (I am working on a way of changing this)ExpressiveDataGenerators: Expressive and powerfull test data generators.Fabrikam Fiber: This project provides download and support to anyone (i.e. trainers) who want to access the Fabrikam Fiber sample application, setup scripts, notes, etc.Get all numbers in between a pair of numbers: Get all integers between two numbers. C#, VB.NETHungryCrowd food lovers market: food lovers market, food, marketsInvalid User Details for SharePoint 2007 and 2010 Sites: Client Based Utility to export invalid users from a SharePoint site (2007 and 2010), as a CSV file using native SP Web Services (UserGroup.asmx and People.asmx)Kh?o Sát Công Ngh?: 1. Tên d? tài: Th?c tr?ng và gi?i pháp h? tr? nâng cao nang l?c c?nh tranh c?a các doanh nghi?p nh? và v?a t?nh Thanh Hóa Lightning: Micro toolkit to make it easy to get content on your site, and serve it fast.LovelyCMS: LovelyCMS ist ein sehr einfaches Content Management System auf der Basis von ASP.NET MVC4.MVC Error Handler: Simple library that allows you to easily create error pages for common HTTP error and application exceptions.MVC Table Styling selection to CSS and demo table: Enter table styling by selection from drop-down list and both generated CSS and see effect of the CSS on a demo table.MvcWebApiFramework: main frameworkNoDemo: It is not only a demo.NumbersInWordsRU: ?????? ??? ??????????? ????? ??????? ? ????? ????????Omnifactotum: Omnifactotum is the .NET library intended to help .NET developers avoid writing the same helper types, methods and extension methods for different projects.Outlook Rules Offline Processor: A utility for organizing Microsoft Outlook rules. The utility uses the rules export file, *.RWZ, to make changes.SharePoint Farm documentation tool: The SPDocumentor (SharePoint Farm documentation tool) allows you to generate a word document that includes most of your farm settings. Startup Shutdown Mailer: This tool is a simple Windows Service which sends an e-mail to a specified account whenever your PC was started up or shut down.YüzKitabi: Daha güvenli ve etkilesimli YüzKitabi Uygulamasi

    Read the article

  • Sending emails from PHP - email providers vs GAE

    - by nrph
    I need to send emails from my social service (this is continuation of Experiences in mailing to registered users). I got strong feeling that it's better to avoid problems with email server configuration and maintance and to choose email provider which will take care of all painful problems. So several offers were compared: http://imgur.com/JkK2X.jpg Three of them look very attractive: Postageapp / Sendgrid / CritSend As alternative i'm considering setup GAE app. Email provider is quite easy to start work with, but have no idea how much effort require GAE to integrate with PHP. So my question is: which option is better to choose: email provider GAE ? Two factors are important here: business background (therefore prices are mentioned), work required to setup and maintain desired solution. Preferably i would love to avoid all email-related problems (like black lists and so on).

    Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >