Search Results

Search found 27870 results on 1115 pages for 'standard output'.

Page 310/1115 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• One Windows Domain workstation can ping gateway but gets no internet access

  - by dindeman

  One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

  Read the article

• How to best configure IIS7 logging to capture "HTTP_X_FORWARDED_FOR" header

  - by zeroasterisk

  We have IIS7 servers sitting behind an nginx reverse proxy. The reverse proxy is sending the standard "HTTP_X_FORWARDED_FOR" header with the visitor IP address, but IIS7 logging is only logging the IP address of the nginx server (which makes sense, but it's not what I want). How can I tell IIS7 to instead log the "HTTP_X_FORWARDED_FOR" header (or additionally log it)? (note: I'm a linux admin, not a windows one, so explicit instructions & links are sincerely appreciated)

  Read the article

• windows smartphone phone call recording software needed. Help!

  - by superb1

  HI friends! My mobile ASUS m530w. I need to record some call in stealth mode. I need to collect proof to solve a personal problem. memory on mobile is 52 MB OS is Win CE 6 Standard processor Intel PXA 270 suggest me where can i get such software. regards superb1

  Read the article

• How do I keep windows XP from automatically changing the screen resolution?

  - by roamn

  I have an Asus EEEBox (EB202, intel GMA 950) hooked up to my 1080p TV (DVI-HDMI cable). I use it to watch standard definition movies and TV shows. I prefer to run at 1280x720 so that I can see things more easily, but every time I turn off the TV, then back on again, the resolution defaults to 1080p (1920x1080). How can I force a specific resolution? If that's not possible, is there a way to use a batch script to switch to the desired resolution faster?

  Read the article

• allow spoofing when using tun

  - by Johnny

  I have a working openvpn setup with a server and a number of clients. How would i go around allowing IP spoofing through the openvpn server? (to demonstrate security concepts)? A normal ping from client to server goes through all right: root@client: hping3 10.8.0.1 HPING 10.8.0.1 (tun0 10.8.0.1): NO FLAGS are set, 40 headers + 0 data bytes len=40 ip=10.8.0.1 ttl=64 DF id=0 sport=0 flags=RA seq=0 win=0 rtt=124.7 ms root@server:/etc/openvpn# tcpdump -n -i tun0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tun0, link-type RAW (Raw IP), capture size 65535 bytes 10:17:51.734167 IP 10.8.0.6.2146 > 10.8.0.1.0: Flags [], win 512, length 0 But when spoofing a packet, it does not arrive at the openvpn server: root@client: hping3 -a 10.0.8.120 10.8.0.1 HPING 10.8.0.1 (tun0 10.8.0.1): NO FLAGS are set, 40 headers + 0 data bytes root@server:/etc/openvpn# tcpdump -n -i tun0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tun0, link-type RAW (Raw IP), capture size 65535 bytes My current config files server.conf local X.Y.Z.P port 80 proto tcp dev tun ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun persist-local-ip status openvpn-status.log verb 3 client.conf client dev tun proto tcp remote MYHOST..amazonaws.com 80 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3

  Read the article

• What's the difference between one-dash and two-dashes for command prompt parameters?

  - by Pacerier

  I was wondering why is it that some programs requires their command prompt parameters to have two dashes in front whereas some (most) only require one dash in front? For example most programs look like this: relaxer -dtd toc.xml toc_gr.xml toc_jp.xml Whereas some programs look like this: xmllint --valid toc.xml --noout What's the reason that some requires two dashes instead of one? Doesn't it make sense for everyone to stick to one standard (i.e. a single dash will do).

  Read the article

• Find the php script thats sending mails

  - by adam

  Hi, Is there any way for me to find the php script that is sending emails. I have apache+php ( no mod_suphp neither suexec ) in a "standard" install, and i want to find out witch php script is sending emails, when i check the logs i just see the uid of the user that's sending the emails ( in my case apache ) but i want to find out the script that's originated the email. Is it possible or i must install suexec or mod_suphp to keep trac of that ? Thks for the help.

  Read the article

• How do I host a Windows Terminal (to run Windows applications and be accessed by users via a standar

  - by Ivan

  How do I host a Windows Terminal (to run Windows applications and be accessed by users via a standard MS Remote Desktop client) on a Linux server? I've heard there are some alternatives to Microsoft server software for this purpose.

  Read the article

• How to not get emails you send on an Microsoft Exchange distribution list?

  - by wojo

  When we used to run our own Exchange server I do not recall getting emails sent back to me that I sent to a distribution list of which I'm a member. However, in our current situation I am getting emails that I sent. Is this standard Exchange behavior? Is there a way to control whether you get your own emails sent back to you when sent to a distribution list that you are on?

  Read the article

• Realtime MS SQL Database transfer

  - by user34402

  Hello, I have MS SQL 2005 Standard that is used actively (new data is added every minute). I need to transfer it to another server (new hosting provider), without losing the data and without downtime. Is there any way to do it?

  Read the article

• Problems downloading Full Magento install via purely FTP on shared server

  - by optician

  Hi, I'm currently trying to download a full magneto install from a ftp server. The connection keeps failing, it seems as if there are too many files and folders to scan through? Can anyone shed any light on how to resolve this? The shared platform seems to b e a standard platform based on Plesk 8.6. As this is a shared server, there is no option for me to really do anything, apart from contact the hosting company (who have offered to zip up all the files for me, but this is not ideal)

  Read the article

• Monitor attached to motherboard is out of frequency

  - by Neilvert Noval

  I don't know if this is appropriate to ask it here in superuser. Please, just route this to appropriate stackexchange site if found unrelevant. Here's my scenario. I have bought a new motherboard (MSI 785GT-E63). I already have an old CRT monitor connected to it. After I install a linux OS to it, my monitor will display that it is: Out of frequency. Current frequency is 89Hz. The operating output of my monitor is (around) 60-70Hz. I would like to get this thing work. How can I let my CRT display properly? I was thinking of lowering down video frequency output of my motherboard, but I can't find any settings on my BIOS setup. Additional info: My monitor is attached directly to the built-in video adaptor of my motherboard. (No additional video cards) Install of OS is complete without errors. Please help.

  Read the article

• Find which files an apache process is writing to?

  - by Haluk

  We have this apache process which becomes io-bound time to time. Using atop, we can see it is a write operation. Using lsof -p <PID> we can see a list of files open by the httpd process. First we thought "log" files must be the problem. So we turned them off just to test. However write operations still continues. We will continue testing a few other things. For instance we use php session variables a lot. Maybe php session files are getting all the writing. But is there a way to quickly identify files which get written to by the httpd process? This way we can focus our efforts on those files. UPDATE: We used the strace command as suggested. Here are two lines from the output. write(23, "\27\0\0\0\3SET CHARACTER SET utf8", 27) = 27 write(23, "\17\0\0\0\3SET NAMES utf8", 19) = 19 We do not have a mysql process on this server. So is strace also showing what is being written to an ethernet port? UPDATE2: During high io load, the process which consumes most of the write resources gives the following output to strace -e trace=write -p <PID>: --- SIGCHLD (Child exited) @ 0 (0) --- write(9, "!", 1) = 1 write(19, "OPTIONS * HTTP/1.0\r\nUser-Agent: Apache (internal dummy connection)\r\n\r\n", 70) = 70 However I cannot figure out where these are being written to.

  Read the article

• Windows7: Gaining administrator rights in CLI without being prompted for password

  - by liori

  Hello, I am trying to write a script which includes disk defragmentation as one of its steps. defrag needs administrative rights to work. I tried to use runas /user:Administrator, but it always asked me for password (even though there isn't one set). The script needs to run unattended for a long time, and it needs to be started from standard user account (it is actually being run by cygwin), so I'd like to get rid of that prompt. Is this possible? Thanks,

  Read the article

• Backtrack, Wi-Fi not working

  - by hradecek

  I've installed Backtrack 5R3 KDE, and I realized that my wireless is not working, but wired is working fine. Here's the lshw output: *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 05 serial: 04:7d:7b:b7:46:f8 size: 100MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:42 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB Controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)

  Read the article

• How to continue an HTTrack mirroring session from the command line?

  - by isme

  I want to drive my mirroring project using the Command Prompt instead of the WinHTTrack interface so that I can script and schedule the mirroring session more easily. The output of httrack --help gives a simple command for continuing an interrupted mirroring session: example: httrack --continue continues a mirror in the current folder When I try httrack --continue in my HTTrack project folder, all I get is output like this: Example: -%F "<!-- Mirrored from %s by HTTrack Website Copier/3.x [XR&CO'2010], %s -->" * Option %F needs to be followed by a blank space, and a footer string With each parameter on a new line for readability, the first line of my doit.log file looks like this: -qiC1%P0s0b0u1j0%s%u0N0%I0p1DaK0c1T30H0%kf2E1800A25000%c0.1%f#f -F "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)" -%F "" -%l "en, en, *" http://saa.gov.uk/search.php?SEARCHED=1&SEARCH_TABLE=council_tax&SEARCH_TERM=City+of+Edinburgh&DISPLAY_COUNT=100 -O1 "C:\\Users\\Iain\\Projects\\Council Tax Analysis\\Code\\HTTrack\\Council Tax Valuation List" -* \ +*search.php?SEARCHED=1* -*DISPLAY_MODE=FULL* The parameter %F "" should tell HTTrack to use an empty footer. I used the WinHTTrack interface to create the project and start the mirroring session. I can interrupt and continue the mirroring session using the interface. The HTML files saved by WinHTTrack have no footer.

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• Remote Server: Please wait for the System Event Notification Service

  - by Jeff Handley

  I was rebooting a remote server (Windows Server 2008 R2 Standard) over remote desktop and the session now shows the blue screen during the shutdown sequence, and the message "Please wait for the System Event Notification Service..." It seems that everything is still running on the server (for instance, http://jeffhandley.com is still responding), but I need to get the machine to finish the reboot sequence. How can I force the machine past this point? It's been stuck there for about 30 minutes.

  Read the article

• How to back up initial state of external backup drive?

  - by intuited

  I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

  Read the article

• Missing WYSIWYG controls in Trac

  - by 01es

  I'm not sure whether this was the case right after the Trac installation or as the result of some misconfiguration. Below is a screecapture of a wikipage in the edit mode, where the standard WYSIWYG controls (expected to be present just above the text input in the left corner) are missing. In an attempt to solve the issue, TracWysiwygPlugin was installed, but this has not changed the situation. What could be the reason for missing WYSIWYG controls and how could it be fixed?

  Read the article

• Looking for Mini itx board suitable for hooking up to a television.

  - by Jaxsun

  I am building a small computer to hook up to my tv for playing some games and playing media. I would like to find a board with both HDMI and standard RCA hookups that would be powerful enough to play full HD video (if it has an embedded cpu). I came across the VIA VB8003 which seemed to fit my needs but it doesn't seem to be widely available. Any help would be greatly appreciated, thank you.

  Read the article

• Is it possible to change the look and feel of remote X applications running under Xming?

  - by Rasive

  I am running Eclipse remotely right now, in Xming on my Windows pc, through an ssh tunnel from my laptop running Ubuntu 11.10. As seen below, it doesn't look that bad, but it seems that my applications defaults to the standard theme when it cannot find any others for GTK+ applications. Is there anything I can do about this? Also it would be nice if I could do something about the font settings to make it more easily readable.

  Read the article

• mysql - moving to a lower performance server, how small can I go?

  - by pedalpete

  I've been running a site for a few years now which really isn't growing in traffic, and I want to save some money on hosting, but keep it going for the loyal users of the site and api. The database has one a nearly 4 million row table, and on a 4gb dual xeon 5320 server. When I check server stats on this server with ps -aux, i get returns of mysql running at about 11% capacity, so no serious load. The main query against mysql runs in about 0.45 seconds. I popped over to linode.com to see what kind of performance I could get out of one of their tiny boxes, and their 360mb ram XEN vps returns the same query in 20 seconds. Clearly not good enough. I've looked at the mysql variables, and they are both very similar (I've included the show variables output below, if anybody is interested). Is there a good way to decide on what size server is needed based on what I'm coming from? Is it RAM that is likely making the difference with the large table size? Is there a way for me to figure out how much ram would be ideal?? Here's the output of the show variables (though I'm not sure it is important). +---------------------------------+------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/ | | bdb_cache_size | 8384512 | | bdb_home | /var/lib/mysql/ | | bdb_log_buffer_size | 262144 | | bdb_logdir | | | bdb_max_lock | 10000 | | bdb_shared_data | OFF | | bdb_tmpdir | /tmp/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 10 | | datadir | /var/lib/mysql/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | keep_files_on_create | OFF | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | ft_boolean_syntax | + - For some reason, that table formats properly in the preview, but apparently not when viewing the question. Hopefully it isn't needed anyway.

  Read the article

• Looking for Hard Drive Health Monitoring software

  - by RandyMorris

  I am aware that the current standard method of drive redundancy and backups would be a better solution, but I would be interested if there was a software that could be installed on workstation computers that could monitor hard drive health and give a warning if the drive looks like a failure is imminent. I have tried hdd health but it does not give me very useful information. I am not interested in drive space, just want a heads up before a drive failure. Anyone know anything like this?

  Read the article

• Setting up logging for a remote backup script

  - by Brian Dainis

  So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >